Kõik hinnakirjad

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 3mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)120 x 20 x 1,5mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 0,5mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0ColorpinkElongation (ASTM D412)40%

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 1,5mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 1mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 3mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink

The Alphacool Aurora Acryl GPX-A 6800(XT) Eisblock merges style with high performance and extensive digital RGB lighting. With over 16 years of experience, Alphacool has the expertise to design GPU waterblocks that stand for premium quality and outstanding performance. This perfectly describes the Aurora Acryl GPX Eisblock.More Performance!In developing the Eisblock Aurora GPX-A 6800(XT) GPU block, the goal was to further enhance performance. The first step was bringing the cooler closer to each component by reducing the thickness of the thermal pads to just 1 mm. The thickness of the nickel-plated copper block was also reduced—from 7 mm to only 5.5 mm. Additionally, the internal water flow was optimized, allowing all key components such as voltage regulators and memory to be cooled much more effectively. These improvements result in a substantial increase in cooling performance.New Design!The Eisblock Aurora GPX-A 6800(XT) cooler places greater emphasis on lighting than previous models. Addressable digital RGB LEDs are integrated directly into the cooling block and extend across its entire length, creating full illumination of the cooling block. No corner or edge is left in the dark thanks to the aRGB LEDs. The new design features more angular lines, with all edges beveled. These bevels improve light diffusion within the waterblock due to reflections and create various contours that give the Aurora GPX-A 6800(XT) Eisblock a unique identity.Copper or Aluminum?Alphacool uses copper exclusively in its water coolers. For the Aurora GPX-A 6800(XT) Eisblock, the copper is nickel-plated. Compared to earlier models, Alphacool has enhanced the nickel plating, greatly increasing acid resistance and thus minimizing the risk of nickel flaking. Why does Alphacool choose copper over aluminum? Quite simply, copper has nearly twice the thermal conductivity of aluminum, making it a clearly superior material for water cooling.Anything Else New?The Eisblock Aurora GPX-A 6800(XT) also features new patented stop fittings that sit flush with the terminal’s surface. The Alphacool logo is now positioned at the corner on the top, where it is fully illuminated. The front of the terminal displays the corresponding names of compatible graphics card types, which are also fully lit by digital LEDs. IN and OUT ports are now marked by small triangles, which are easily recognizable and perfectly match the overall aesthetics of the graphics card waterblock.The Alphacool Aurora GPX-A 6800(XT) Acryl is a complete redesign of previous Alphacool GPU waterblocks. No technical compromises were made, drawing on all of Alphacool’s technical expertise during its development and implementation.Note:- This product comes with a backplate. Technical data:L x W x H: 130 x 262.5 x 24.5 mmCooler material: Nickel-plated copperTop material: AcrylicCooling fin thickness: 0.6 mmThreads: 4x G1/4“Digital RGB power connector: 3-Pin 5V (0.5A) Graphics Card Configurator: Click here!List of Compatibility: AMD graphic cardsCompatibility list:- AMD Radeon 6800 Reference Design- AMD Radeon 6800 XT Reference Design- AMD Radeon 6900 XT Reference Design- AMD Radeon 6950 XT Reference DesignMore compatible models will be added to this list for this cooler. We are currently reviewing other PCB designs from various manufacturers!Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800/6800XT/6900XT Reference with BackplateDownload data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800/6800XT/6900XT Reference with Backplate

The Alphacool Aurora Acryl GPX-N RTX 3070 Eisblock combines style, performance, and extensive digital RGB lighting. With over 16 years of experience, Alphacool has the ability to create GPU blocks that offer high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock. More Performance! During the development of the Eisblock Aurora GPX-N RTX 3070 graphics card GPU block, we aimed to further increase the performance. The first step was to bring the cooler closer to individual components by reducing the thermal pads to a thickness of 1 mm. Next, the thickness of the nickel-plated copper block was reduced—from 7 mm to just 5.5 mm. The water flow inside the cooler has also been optimized. All key components, such as the voltage regulators and memory, are now cooled much more efficiently by the water, resulting in a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3070 cooler has a design that emphasizes lighting more than previous models. Addressable digital RGB LEDs are embedded directly into the cooling block and run along its entire length, illuminating the entire unit with no corner or edge left unlit by the aRGB LEDs. The new design features more angular edges, all of which are beveled. This improves light diffusion within the water cooler due to the reflections on the bevels, creating unique contours that give the Aurora GPX-N RTX 3070 Eisblock its own distinctive identity. Copper or Aluminium? Alphacool uses only copper for its water coolers. In the Aurora GPX-N RTX 3070 Eisblock, the copper is nickel-plated, and compared to previous models, Aphacool has further improved the nickel plating for greater acid resistance, which helps the nickel resist flaking. Why does Alphacool prefer copper over aluminum? Simply put, copper has nearly twice the thermal conductivity of aluminum, making it clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3070 also features new patented stop fittings that sit flush with the terminal’s surface. The Alphacool logo is now positioned in the corner on top and is fully illuminated. On the front of the terminal, you’ll find the names of compatible graphics card types, also fully illuminated by digital LEDs. IN and OUT ports are now marked by small triangles, which are clearly visible and fit perfectly into the overall aesthetics of the card cooler. The Alphacool Aurora GPX-N RTX 3070 Acryl is a complete redesign of Alphacool’s previous graphics card water coolers. No technical compromises were made, incorporating all of Alphacool’s technical expertise into its development and implementation. Technical data: - Dimensions (L x W x H): 128 x 185 x 24.5 mm - Cooler material: Nickel-plated copper - Cooler top material: Acrylic - Threads: 4 x G1/4“ - Cooling fin thickness: 0.6 mm - Illumination: Digital RGB LEDs - Power connector, Digital RGB LEDs: 3-Pin JST - Power, Digital RGB LEDs: 5V Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphics cards Compatibility: - Zotac Gaming GeForce RTX 3070 Twin Edge OC, 8GB GDDR6, HDMI, 3x DP (ZT-A30700H-10P) - Zotac Gaming GeForce RTX 3070 Twin Edge, 8GB GDDR6, HDMI, 3x DP (ZT-A30700E-10P) Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 Gaming Twin Edge with Backplate Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 Gaming Twin Edge with Backplate

Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component. Technical dataDimensions (L x W x H)100 x 100 x 0,5mmThermal conductivity7W/mKColorpink

Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component. Technical dataDimensions (L x W x H)100 x 100 x 1,5mmThermal conductivity7W/mKColorpink

Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves. The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht. The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for leveling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component.

Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component. Technical dataDimensions (L x W x H)120 x 20 x 1mmThermal conductivity7W/mKColorpink

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool's ultimate solution for cooling your computer with a layer of ice. Not a layer of ice in the traditional sense made of frozen water, but a layer that will freeze any chip. The properties of the new thermal pads speak for themselves.With up to 17 W/mk, the pads outperform all previous thermal pads and pastes! All hardware components can now be installed easily and cleanly using thermal pads!The "Alphacool ice layer" offers all the advantages and typical properties of a thermal pad: self-adhesive, elastic, adaptable and much more! The area of application is just as versatile, whether for RAM and mainboard coolers or graphics card and CPU coolers, wherever the circuit board meets the heat sink, the Alphacool ice layer is a good choice.The pads are available in different power levels, 11, 14 and 17W/mk, each available in 0.5mm, 1mm and 1.5mm thickness to perfectly compensate for height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers). These can be easily separated with scissors to individually adjust the right size for each component. Technical dataDimensions (L x W x H)100 x 100 x 1,5mmThermal conductivity17W/mKThickness1,5mmFlame retardantV-0 (UL94)Useful temperature-40 ~ +150 °CHardness72 (Shore OO)Specific gravity3.2Breakdown voltage10 kV/mmElongation40 %Tensile strength0.5 MPaVolume resistivity1.0x10^11 Ohm-mFasteningslightly adhesiveColorgrey

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

The Eisschicht from Alphacool can, like other thermal pads, compensate for the irregularities of heat sinks and the elements to be cooled. But it has a great feature: The Eisschicht consists of thermal paste with an embedded mesh! This ensures that the performance of these pads is much more efficient than normal thermal pads, regardless of the low W/mK value. In addition, a better distribution and filling between the surfaces is achieved. This also results in better air displacement. Due to their soft consistency, there is also no pressure on components or solder joints. Nvidia also uses this kind of pads for the Founders Edition. The Eisschicht can be easily cut to the desired size and attached to heat sinks without slipping.As a basic component or spare part, thermal pads belong in every well-organized computer tinkering corner! Technical dataDimensions (L x W x H)100 x 100 x 0,5mmThermal conductivity3 W/mKElectrical ConductiveNoColorwhite

The Eisschicht Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. These Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Ultra Soft thermal pads acts similar to a thermal paste. While normal thermal pads are only pressed together by the contact pressure there can be areas that are uneven due to different high components, making them less effective. With the ultra soft Eisschicht this problem doesn’t exist because the material distributes itself similar to thermal paste and thus prevents the highest components from being subjected to increased contact pressure by the cooler. As standard thermal pads are quite stiff they can also cause too much pressure on components. In the worst cases, this can cause the PCB to bend and even break. Due to the soft consistency of the Ultra Soft Eisschicht any excess material can spread out rather than cause problems. The Ultra Soft Eisschicht is not only performance orientated, but also safer!But this is not the only advantage!Moreover, the special material cannot dry out. Usually the silicone in thermal pads bleeds out over time. This makes them hard and the performance of the pads drops rapidly from a certain point. This is not the case with the Ultra Soft Eisschicht. They can be used over a much longer period of time without significantly losing performance.A thermal pad with fabric?The consistency of the heat conducting material is similar to a viscous heat conducting paste. A special fabric is embedded so that the material remains stable and can be used as a thermal pad. This ensures a perfect distribution of the material if the element to be cooled has an uneven shape. Examples include voltage transformers, VRam and similar electronic components of all kinds that require cooling.Cutting? No problem!To cut the thermal pads to size, you should definitely leave the foil on the pads. So the pads can easily be cut to size with a pair of scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. Technical dataL x W x H100 x 100 x 1,5mmSpecific Gravitiy ASTM D2972,65 g/ccThermal Conductivity ASTM D54703.0 W/mKHardness ASTM 224020 Shore 00Working temperature40 to 200°COutgassing ASTM E5950,40% TMLVolume Resistivity ASTM D2576.2X10 high 13 Ohm-meterDielectric Constant ASTM D1505,5 MHzDielectric Breakdown Voltage ASTM D149>5000 VACFlame Rating UL E33110094 V0Colorwhite

The Eisschicht from Alphacool can, like other thermal pads, compensate for the irregularities of heat sinks and the elements to be cooled. But it has a great feature: The Eisschicht consists of thermal paste with an embedded mesh! This ensures that the performance of these pads is much more efficient than normal thermal pads, regardless of the low W/mK value. In addition, a better distribution and filling between the surfaces is achieved. This also results in better air displacement. Due to their soft consistency, there is also no pressure on components or solder joints. Nvidia also uses this kind of pads for the Founders Edition. The Eisschicht can be easily cut to the desired size and attached to heat sinks without slipping.As a basic component or spare part, thermal pads belong in every well-organized computer tinkering corner! Technical dataDimensions (L x W x H)100 x 100 x 1mmThermal conductivity3 W/mKElectrical ConductiveNoColorwhite

The Alphacool Eisschicht Ultra Soft are the ultimate in thermal pads. Their outstanding properties mean they can almost be compared to thermal paste. The Eisschicht Ultra Soft pads fit much better to components, which contributes to excellent cooling performance.Better than standard thermal pads?The ultra-soft material of the Eisschicht Ultra Soft thermal pads acts in a similar way to thermal paste. While normal thermal pads are simply pressed together by the contact pressure, which can lead to uneven contact pressure on components of different heights, this is almost impossible with the Eisschicht Ultra Soft thermal pads. The material spreads as well as thermal paste and thus prevents the highest components from being subjected to increased contact pressure from the cooler. In the worst case, this can lead to the PCB bending. The soft consistency also fills in any uneven areas much better. The Eisschicht Ultra Soft thermal pads therefore cling much better to the components, which of course benefits heat transfer.But that’s not the only advantage!The special material also cannot dry out. Usually the silicone in thermal pads bleeds over time. This causes them to become hard and the performance of the pads drops rapidly at a certain point. This is not the case with the Eisschicht Ultra Soft thermal pads. They can be used for a much longer period of time without losing any significant performance.A thermal pad with fabric?The consistency of the heat-conducting material is similar to a viscous thermal paste. A special fabric is embedded so that the material remains stable and can be used as a thermal pad. This ensures perfect distribution of the material if the element to be cooled has an uneven shape. Examples of this include voltage converters, VRam and similar electronic components of all kinds that require cooling.Cropping? No problem!When cutting the thermal pads, you should definitely leave the foil on the pads. This means that the pads can be easily cut to size with scissors. It's just as easy as cutting paper. The cut edges stay perfectly clean and don't fray.The Alphacool Eisschicht Ultra Soft thermal pads are superior to the usual thermal pads in many ways and are also used in all new Eisblock Aurora graphics card coolers from Alphacool. Technical dataDimensions (L x W x H)100 x 100 x 3mmThermal conductivity3 W/mKElectrical ConductiveNoColorwhite

The small heat sinks are the perfect addition for cooling various electronic components such as the graphics card VRam, the voltage transformer on a motherboard, or even in a power amplifier or in RC vehicles. To ensure maximum heat capacity and cooling performance, the coolers are made of copper. Alphacool uses a special coating to prevent the infamous greenish discolouration on copper as much as possible. This increases the lifespan of the cooler and ensures steady cooling performance. The coolers can be installed onto the desired components with optional thermal paste or self-adhesive thermal pads. Technical Data Dimensions: 10 x 10mm Material: Fullcopper Scope of Delivery Alphacool GPU RAM Copper Heatsinks 10x10mm - 10pcs

The small heat sinks are the perfect addition for cooling various electronic components such as the graphics card VRam, the voltage transformer on a motherboard, or even in a power amplifier or in RC vehicles. To ensure maximum heat capacity and cooling performance, the coolers are made of copper. Alphacool uses a special coating to prevent the infamous greenish discolouration on copper as much as possible. This increases the lifespan of the cooler and ensures steady cooling performance. The coolers can be installed onto the desired components with optional thermal paste or self-adhesive thermal pads. Technical Data Dimensions: 14 x 14mm Material: Fullcopper Scope of Delivery Alphacool GPU RAM Copper Heatsinks 14x14mm - 10pcs

The small heat sinks are the perfect addition for cooling various electronic components such as the graphics card VRam, the voltage transformer on a motherboard, or even in a power amplifier or in RC vehicles. To ensure maximum heat capacity and cooling performance, the coolers are made of copper. Alphacool uses a special coating to prevent the infamous greenish discolouration on copper as much as possible. This increases the lifespan of the cooler and ensures steady cooling performance. The coolers can be installed onto the desired components with optional thermal paste or self-adhesive thermal pads. Technical Data Dimensions: 6,5 x 6,5mm Material: Fullcopper Scope of Delivery Alphacool GPU RAM Copper Heatsinks 6,5x6,5mm - 10pcs

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.But that is not the only advantage!The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.Cutting to size? No problem!When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical dataDimensions (L x W x H)100 x 100 x 0,5mmSpecific Gravitiy ASTM D7923,3 g/ccThermal Conductivity ASTM D54707.0 W/mKHardness ASTM 224025 Shore OOUseful Temperature-40 to +160 °CVolume Resistivity ASTM D2575,2x1013 Ohm-mDielectric Constant ASTM D1504,5 MHzDielectric Breakdown Voltage ASTM D1495,5 kV/mmFlame Rating UL E331100UL94 V0Weight18 gColorGrey

The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.But that is not the only advantage!The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.Cutting to size? No problem!When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical dataDimensions (L x W x H)100 x 100 x 1mmSpecific Gravitiy ASTM D7923,3 g/ccThermal Conductivity ASTM D54707.0 W/mKHardness ASTM 224025 Shore OOUseful Temperature-40 to +160 °CVolume Resistivity ASTM D2575,2x1013 Ohm-mDielectric Constant ASTM D1504,5 MHzDielectric Breakdown Voltage ASTM D1495,5 kV/mmFlame Rating UL E331100UL94 V0Weight40 gColorGrey

The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.But that is not the only advantage!The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.Cutting to size? No problem!When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical dataDimensions (L x W x H)50 x 50 x 2mmSpecific Gravitiy ASTM D7923,3 g/ccThermal Conductivity ASTM D54707.0 W/mKHardness ASTM 224025 Shore OOUseful Temperature-40 to +160 °CVolume Resistivity ASTM D2575,2x1013 Ohm-mDielectric Constant ASTM D1504,5 MHzDielectric Breakdown Voltage ASTM D1495,5 kV/mmFlame Rating UL E331100UL94 V0Weight19 gColorGrey

The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.But that is not the only advantage!The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.Cutting to size? No problem!When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical dataDimensions (L x W x H)50 x 50 x 3mmSpecific Gravitiy ASTM D7923,3 g/ccThermal Conductivity ASTM D54707.0 W/mKHardness ASTM 224025 Shore OOUseful Temperature-40 to +160 °CVolume Resistivity ASTM D2575,2x1013 Ohm-mDielectric Constant ASTM D1504,5 MHzDielectric Breakdown Voltage ASTM D1495,5 kV/mmFlame Rating UL E331100UL94 V0Weight28 gColorGrey

Alphacool’s answer to the often difficult situation of being unable to mount the heatsink conventionally. With this double-sided thermal adhesive pad from Alphacool it is possible to mount a heatsink at any desired spot without having to worry about mounts, hole spacing or other constructive details.This is especially interesting for systems such as Alphacool’s MCX system to allow mounting of heatsinks for graphics cards or Mainboards. But long-term testing shows that these pads are capable of much more than just holding small heatsinks! A holding power of at least 16N/25mm means an adhesive force greater than with some duct tapes! This allows mounting even of heavy coolers and the capability to deal with shocks from transport or twisting/ permanent pressure. But the engineers at Alphacool also paid attention to the thermal conductivity aspect. Different from the first adhesive pads on the market, which were rather insulation than thermal conductor, these pads transfer the heat with a thermal conductivity of up to 1W/mK The pads are covered with a protective foil on both sides when shipped. When this foil is pulled off, the white pad becomes visible. The pad feels very similar to rubber, and has the same advantages: It adapts to the surfaces easily, hence allowing the best possible heat transfer. Multiple pre-cut dimensions make cutting almost obsolete, but should it be needed to adjust the size of a pad, simply use scissors or a knife! Technical specifications:Material: PolymersColour: WhiteDimensions (L x W x H):15x15x0,5mmThermal conductivity: Up to 1W/mkAdhesive strength: min: 16N/25mm electrically non-conductiveconforms with ROHS Extent of delivery:1x Alphacool double-sided thermal adhesive pad 15x15x0,5mm

Alphacool's answer to the often unsolvable problem: "The cooler cannot be screwed on!" With the double-sided thermal adhesive pad from Alphacool, you can mount your cooler in the desired location regardless of hole spacing, mounting brackets or other options provided. This is particularly interesting, for example, with the in-house MCX system for mounting mini coolers for graphics cards or motherboards. But long-term tests show that you can attach much more than just mini coolers! At least 16N / 25mm means an adhesive force that is better than some duct tape! This means that even heavier coolers can be hung up and even impacts during transport or twisting / constant pressure are no problem. The Alphacool thermal adhesive pad also does not lose sight of the cooling performance. While the first thermal adhesive pads on the market behaved more like insulation, these pads even transfer heat at up to 1W/mK. The pads are covered with a protective film on both sides when they are delivered. If you remove this, you can see the bright white pad, which feels almost like rubber and behaves in almost the same way. It adapts very well to the surface. Various pre-made dimensions make cutting almost unnecessary, but if it should ever be necessary to adjust the size, a pair of scissors or a knife is sufficient. Technical data Material: Polymers Color white Dimensions (LxWxH): 26 x 30 x 0.5 mm Thermal conductivity: up to 1W/mk Adhesive strength: min: 16N/25mm electrically non-conductive ROHS compliant scope of delivery 1x Alphacool thermal adhesive pad double-sided 26x30x0.5 mm

Alphacool’s answer to the often difficult situation of being unable to mount the heatsink conventionally. With this double-sided thermal adhesive pad from Alphacool it is possible to mount a heatsink at any desired spot without having to worry about mounts, hole spacing or other constructive details.This is especially interesting for systems such as Alphacool’s MCX system to allow mounting of heatsinks for graphics cards or Mainboards. But long-term testing shows that these pads are capable of much more than just holding small heatsinks! A holding power of at least 16N/25mm means an adhesive force greater than with some duct tapes! This allows mounting even of heavy coolers and the capability to deal with shocks from transport or twisting/ permanent pressure. But the engineers at Alphacool also paid attention to the thermal conductivity aspect. Different from the first adhesive pads on the market, which were rather insulation than thermal conductor, these pads transfer the heat with a thermal conductivity of up to 1W/mK The pads are covered with a protective foil on both sides when shipped. When this foil is pulled off, the white pad becomes visible. The pad feels very similar to rubber, and has the same advantages: It adapts to the surfaces easily, hence allowing the best possible heat transfer. Multiple pre-cut dimensions make cutting almost obsolete, but should it be needed to adjust the size of a pad, simply use scissors or a knife! Technical specifications:Material: PolymersColour: WhiteDimensions (L x W x H):30x30x0,5mmThermal conductivity: Up to 1W/mkAdhesive strength: min: 16N/25mm electrically non-conductiveconforms with ROHS Extent of delivery:1x Alphacool double-sided thermal adhesive pad 30x30x0,5mm

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 15 x 15 x 1.5mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:24x Alphacool thermal pad for NexXxoS GPX

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 15 x 15 x 2mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:24x Alphacool thermal pad for NexXxoS GPX

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 15 x 15 x 3mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:24x Alphacool thermal pad for NexXxoS GPX

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 30 x 30 x 2mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:2x Alphacool thermal pad for NexXxoS GPX

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 30 x 30 x 3mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:4x Alphacool thermal pad for NexXxoS GPX

Pads included: 1mm 3x 8x8mm 1x 8x15mm 1x 8x16mm 2x 15x 51mm 2x 15x15mm 1x 15x56mm 2mm 1x 15x51mm 1x 15x105mm 1x 8x66mm 1x 8x100mm 3mm 1x 8x100mm 1x 8x84mm 1x 8x74mm 1x 15x28mm 3x 15x51mm 2x 15x15mm 1x 30x30mm

Pads included: 1mm 14x 8x8mm 1x 8x115mm 1x 8x87mm 3x 15x56mm 3mm 1x 8x100mm 1x 8x81mm 1x 45x45mm (hole in the middle) 3x 15x60mm 1x 15x80mm 1x 15x105mm

These thermal pads are very useful to compensate height differences and other irregularities on coolers and surfaces that are to be cooled. Due to the very elastic adaptability and the low hardness of this pad only little contact pressure is needed to allow perfect adaptation to the surfaces to ensure the best possible heat transfer. With these pads almost any unevenness can be compensated, from microscopically small grooves to visible irregularities. The self-adhesive surface of these pads allow easy installation and prevents the pad from shifting during installation of the cooler. These pads can be cut to any desired size and are therefore suitable for just about any application: From VRAM coolers on graphics cards to VRM blocks on the motherboard. Even large components such as the North- or Southbridge can be equipped with these pads, as they have excellent heat conductivity. With their many uses, these thermal pads should be amongst any PC-builder's equipment. Technical data: Dimensions: 15x15x5mm Heat conductivity: 1,5 W/mK Maximum bridgeable gap: 5mm Electrically non-conductive Extent of delivery: 1x thermal pad 15x15x5mm (1 piece) Note: The thermal pads can be compressed to up to half of their height.>

These thermal pads are perfect for compensating height differences and irregularities on coolers and surfaces to be cooled. Their highly elastic and low-hardness design requires minimal contact pressure, ensuring optimal surface adaptation and effective heat transfer. The self-adhesive backing allows for easy installation and prevents shifting during cooler placement, while the pads can be cut to any desired size for versatile use on VRAM coolers, VRM blocks, or even larger components like Northbridge and Southbridge chips. With dimensions of 30x30x0.5mm and a thermal conductivity of 1.5 W/mK, these pads bridge up to 0.5mm gaps and are electrically non-conductive. Scope of delivery: 1x thermal pad 30x30x0.5mm (1 piece) Note: These pads can be compressed to up to half of their height.