Kõik hinnakirjad

This slot bracket by Delock expands the PC by two USB 3.0 Type-A sockets. The cable of the slot bracket is connected internally to the mainboard to a 19 pin USB 3.0 pin header. The internal connection is then led outwards in order to connect devices with USB Type-A connection to the computer.Item no.: 1820459 Slot bracket type EAN Code 4043619848362 Manufacturer part number: 84836 Further information Cable length without connectors: approx. 50 cm

This slot bracket by Delock expands the PC by two USB 3.0 Type-A female ports and can be mounted in Mini PCs due to the low profile bracket. The cable of the slot bracket can be connected internally to the motherboard with a 19 pin USB 3.0 pin header. Thus the internal connection will be lead outside, in order to connect devices with USB Type-A connector to the computer. Specification• Connector: internal: 1 x 19 pin USB 3.0 pin header female external: 2 x USB 3.0 Type-A female• For the installation in a low profile PC• Pitch distance: 2.00 mm• Screw type: #4-40 UNC• Cable gauge: 30 AWG data line 28 AWG power line• Cable diameter: ca. 7 mm• Data transfer rate up to 5 Gbps• Slot bracket: low profile• Cable colour: blue• Cable length without connector: ca. 40 cm System requirements• PC with a free low profile slot• Mainboard with a free 19 pin USB 3.0 pin header male Package content• Slot bracket

This USB 3.0 pin header adapter can be plugged to a free USB 3.0 pin header male of your mainboard in order to expand your system internally by two USB 3.0-A ports. Thus you can connect e.g. an USB memory stick or USB-WLAN stick. Since the USB 3.0-A interface is compatible to its forerunners USB 2.0 and USB 1.1, you can still use your existing USB devices. Specification• Connector: USB 3.0 pin header 19 pin female > 2 x USB 3.0-A female• For direct connection on the mainboard• USB Port direction: parallel (horizontal) System requirements• Mainboard with a free USB 3.0 19 pin connector Package content• Adapter USB 3.0 pin header female > 2 x USB 3.0 female

This Delock port replicator can be connected to a single USB port of your computer and expands your system by several interfaces, like USB, audio, Gigabit Ethernet, DVI and HDMI. The DVI and HDMI ports enable the connection of two additional monitors. The port replicator supports a HD resolution of up to 2048 x 1152.Specification• Connectors: front side: 2 x USB 3.0 Type-A female 1 x microphone 3.5 mm stereo jack 1 x speaker 3.5 mm stereo jack back side: 1 x USB 3.0 Type-B downstream port 1 x DC 5 V power connector 1 x HDMI-A 19 pin female 1 x DVI-I (Dual Link) 24+5 female 1 x Gigabit LAN 10/100/1000 Mbps RJ45 jack 4 x USB 2.0 Type-A female• HDMI and DVI ports supports function: extended and mirror with a resolution up to 2048 x 1152 (depends on the monitor and the existing graphics card)• Hot Plug Power supply specification• Wall power supply• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.8 A• Output: 5 V / 4 A• Ground outside, plus inside• Dimensions: inside: ø ca. 1.7 mm outside: ø ca. 4.75 mm length: ca. 9.5 mm System requirements• Windows 7/7-64/8.1/8.1-64/10/10-64, Mac Lion 10.7.4• PC or laptop with a free USB Type-A port• 1.6 GHz CPU or above• Minimum 30 MB free HDD space Package content• USB 3.0 Port Replicator• USB 3.0 cable• External power supply• Driver CD• User manual

With the 89934 slot bracket from Delock, a PC can be expanded by one USB Type-A and one USB Type-C port. At the USB Type-A port, up to 5 volts / 900 mA are available, along with a data transfer rate of up to 5 Gbps. At the USB Type-C port, up to max. 20 volts / 3 A are available, along with a data transfer rate of up to 10 Gbps. The motherboard must be equipped with a free USB Key A socket and a free 19-pin USB 3.0 pin header connector.

This docking station by Delock can be connected to a computer with a USB-C™ DP Alt Mode or Thunderbolt™ 3 port and provides a variety of interfaces. One monitor can be operated at the HDMI or VGA output. Three built-in USB ports allow the use of peripherals, and connections for gigabit network, as well as an SD / micro SD card reader, complete the features.USB Power Delivery (USB PD 3.0) support up to 100 wattThe docking station has a USB Type-C™ Power Delivery port to connect the power supply of the laptop or tablet to charge it. In addition it also supplies the USB ports with power. The docking station can also be used without a power supply.Small sturdy helperDue to its small dimensions and its sturdy housing, this Delock docking station is particularly suitable for travelling. It can simply be packed into the bag together with the laptop or tablet and used as needed. Specification Connectors:1 x USB Type-C™ male1 x SuperSpeed USB (USB 3.1 Gen 1) USB Type-C™ female1 x USB 3.0 Type-A female1 x USB 3.0 Type-A female - Battery Charging specification BC1.21 x SD / SDHC / SDXC slot1 x Micro SD / SDHC / SDXC slot1 x HDMI-A 19 pin female1 x VGA 15 pin female1 x Gigabit LAN 10/100/1000 Mbps RJ45 jack1 x USB Type-C™ female (power supply)Resolution:HDMI up to 3840 x 2160 @ 30 HzVGA up to 1920 x 1080 @ 60 Hz(depending on the system and the connected hardware)Transmission of audio and video signalsInput power: 1 x USB Type-C™ female max. 100 WMetal housingCable length without connectors: ca. 15 cmColour: greyDimensions (LxWxH): ca. 110 x 59 x 12 mm System requirements Chrome OS 70.0 or aboveLinux Kernel 4.6 or aboveMac OS 10.14.2 or aboveWindows 8.1/8.1-64/10/10-64Device with a free USB Type-C™ port and DisplayPort alternate mode orwith a free Thunderbolt™ 3 port Package content USB-C™ docking stationUser manual

This docking station by Delock can be connected to a computer with a USB-C™ Alt-Mode or Thunderbolt™ 3 port and provides a variety of interfaces. Two monitors can be operated simultaneously at the mini DisplayPort and HDMI outputs, alternatively a single monitor at the VGA output. Three built-in USB Type-A ports allow the use of peripherals, and connections for a headset and gigabit network, as well as an SD / micro SD card reader, complete the features. With a USB-C™ power supply, laptops such as the MacBook or Chromebook can be charged during operation. NoteThe product is a Multi-Stream Transport (MST) hub and supports the extended desktop configuration of DisplayPort 1.2. When Mac OS is used, the same image is displayed on both ports (mirrored), it is not possible to use both ports independently of each other. Specification Connectors:front side:1 x Gigabit LAN 10/100/1000 Mbps RJ45 jack1 x mini DisplayPort 20 pin female1 x HDMI-A 19 pin female1 x VGA 15 pin female1 x USB Type-C™ female (power supply)back side:3 x USB 3.0 Type-A female1 x Headset 3.5 mm 4 pin jack1 x SD / SDHC / SDXC / MMC slot1 x Micro SD / SDHC / SDXC slot1 x USB Type-C™ maleHDMI and DisplayPort ports support: extended and mirror,resolution up to 2560 x 1440 @ 60 Hz or 3840 x 2160 @ 30 Hz(depending on the system and the connected hardware)Functions: Mirrored or Extended (Windows only)VGA resolution up to 1920 x 1080 @ 60 HzTransmission of audio and video signalsOutput power: max. 10 W total,1 x USB Type-A female max. 7.5 W,2 x USB Type-A female max. 5 W (combined)Input power: 1 x USB Type-C™ female max. 60 WMetal housingRubber pads for safe grip and secure standCable length incl. connector: ca. 18 cmColour: dark greyDimensions (LxWxH): ca. 13.7 x 7.5 x 1.7 cm System requirements Windows 8.1/8.1-64/10/10-64, Windows 10 Mobile, Android ex 6.0, ex Mac OS 10.9Device with a free USB Type-C™ port and DisplayPort alternate modeor with a free Thunderbolt™ 3 port Package content USB-C™ docking stationUser manual

Adapter USB 3.0/HDMI-A 19pin/femaleYes, you want to be able to connect additional monitors to your computer and you want to easily connect your laptop to the TV .... But no, you do not want to invest in expensive graphics cards. This USB-HDMI adapter cable changes the usual USB 3.0 port to the HDMI connector. This allows you to easily connect your computer to a TV or other display.- Easily connect a computer to any HDMI display- Add up to 6 additional displays to your computer

<p>9-pin USB 2.0 to 19-pin USB 3.0 internal header cable</p> <p>Enables the connection of USB 3.0 devices through the USB 2.0 pin header of a PC motherboard</p> <p>Data transfer rate up to 480 Mb/s</p>

With the Graugear G-AD-19TE-90, you can effortlessly adapt an internal USB 3.0 19-pin connector to a USB-3.1 (USB-C) 20-pin connector for your front panel. This adapter allows you to easily add a missing USB-C port to the front panel via your motherboard.The adapter is simply plugged into the 19-pin USB Type A connector. The 20-pin Key-A connector can be used immediately. No driver installation is necessary.Technical details:Dimensions: 25 x 11 x 24 mm (W x H x D)Weight: approx. 20 gMaterial: Copper, plasticColor: BlackMotherboard connections: Internal USB 19-pin to internal USB 20-pin (Key A)USB standard:USB 3.1 (Type C, USB 3.2 Gen 2, max. 10 Gbit/s)USB 3.0 (Type C, USB 3.2 Gen 1, max. 5 Gbit/s)

GRAUGEAR Multi front panel with USB 3.2 Gen2 HUB Front panel with 2x USB Type-C® / 2x USB Type-A ports and Micro SD / SD card reader Front panel with 2x USB Type-C® / 2x USB Type-A ports and Micro SD / SD card reader 1x USB Type-C® with a data transfer rate of up to 10 Gbit/s 2x USB Type-A and 1x USB Type-C® with a data transfer rate of up to 5 Gbit/s System requirements: 1x internal USB 3.0 host (19-pin) header, 1x internal USB 3.2 Gen 2 Key A host (20-pin) header Fits into a standard 3.5” (8.89 cm) bay Supports Windows®

<h3>Huion Kamvas 22 Plus graphics tablet</h3> <p>Looking for hardware that can match your precision? The Huion Kamvas 22 Plus is a graphics tablet for those who create in earnest - designers, illustrators, concept artists. With a 21.5-inch full HD screen, an impressive 140% sRGB color space and quantum-dot technology, it delivers incredible image quality and accuracy in rendering every stylus stroke. Add to that full lamination, anti-reflective glass and USB-C connectors, and you have a tool that fits naturally into your work rhythm. Check out what it can do!</p> <p> (image) </p><h3>A screen that impresses</h3> <p>The Kamvas 22 Plus features a 21.5-inch IPS screen with a resolution of 1920 × 1080 px (Full HD) and an aspect ratio of 16:9. quantum-dot technology has achieved coverage of 140% of the sRGB color space, guaranteeing vivid, intense colors and impressive image depth. The 1200:1 contrast ratio further highlights details and chiaroscuro, while the 16.7 million (8-bit) color depth makes every tonal transition look natural and smooth.</p> <p> (image) </p><h3>Realistic drawing experience</h3> <p>Kamvas 22 Plus gives an incredibly realistic drawing experience - just like sketching on a piece of paper. This is thanks to the full lamination, which eliminates the gap between the screen and glass, and the matte, anti-reflective glass with etching finish, which not only protects against light reflections, but also gives a pleasant resistance under the pen - exactly like working on a traditional medium. Parallax is virtually imperceptible, so the cursor precisely follows every movement of your hand. And with a 178° viewing angle, you can look at the screen from either side and still enjoy a clear, consistent image - even in bright light.</p> <p> (image) </p><h3>Less fatigue for your eyes</h3> <p>The low blue light technology used effectively filters out harmful blue light, reducing eye fatigue during long hours of work. This is especially important if you spend days drawing, designing or retouching.</p> <p> (image) </p><h3>A stylus that keeps up with your hand</h3> <p>The Kamvas 22 Plus uses the PW517 pen created with PenTech 3.0 technology. Thanks to a lower magnetic core, the pen works precisely and steadily, without lag or vibration. You have 8192 levels of pressure, angle recognition up to ±60°, and accuracy reaching ±0.3 mm. All to make drawing shadows, lines and details as natural as possible.</p> <p> (image) </p><h3>Two USB-C ports and connectivity flexibility</h3> <p>The tablet is equipped with two USB-C ports for connecting to a computer, laptop, console or Android phone. An additional USB-A port, on the other hand, allows convenient connection of peripherals such as a keyboard, flash drive or external drive. This allows the Kamvas 22 Plus to function as a screen extension or a standalone tool for work and entertainment - on a large 21.5-inch display.</p> <p> (image) </p><h3>Stable, ergonomic and ready to go</h3> <p>The adjustable metal stand allows you to angle the screen from 20° to 80°. This allows you to comfortably adjust your body position and keep your spine comfortable while working. The slim case and weight of only 3.9 kg (with stand) make the tablet, although stable, still a relatively mobile tool for work.</p> <p> (image) </p><h3>Compatibility without limits</h3> <p>Kamvas 22 Plus works with Windows 7 and later, macOS 10.12+, Linux and Android (USB 3.1 DP1.2). It supports popular graphics and design applications, so you can use Photoshop, Illustrator, Clip Studio Paint, Krita and many others without any problems.</p> <p> (image) </p> <h3>Included</h3> <ul class="list-disc pl-5"><li>graphics tablet</li><li>battery-free stylus</li><li>stylus holder</li><li>replaceable nibs (inside the stylus holder)</li><li>pen nib clip (inside the stylus holder)</li><li>power cord</li><li>power adapter</li><li>cleaning cloth</li><li>USB-C cable</li><li>user manual</li><li>warranty card</li></ul> <div class="table-wrapper"> <p> </p> <h3></h3> <table> <tbody> <tr><th>Manufacturer</th><td>Huion</td></tr><tr><th>Model</th><td>GS2202</td></tr><tr><th>Color</th><td>dark grey</td></tr><tr><th>Dimensions</th><td>546 x 323 x 19~26.7 mm</td></tr><tr><th>Working area</th><td>476.64 x 268.11 mm</td></tr><tr><th>Net weight</th><td>3.9 kg (with stand)</td></tr><tr><th>Stand</th><td>Adjustable stand 20°~80°</td></tr><tr><th>Video interface</th><td>USB-C, fully functional USB-C</td></tr><tr><th>Input voltage</th><td>AC 100-240V, 50/60Hz</td></tr><tr><th>Output voltage</th><td>12V 3A</td></tr><tr><th>Power consumption</th><td>≤24W</td></tr><tr><th>Power consumption in standby mode</th><td>≤0,3 W</td></tr><tr><th>Operating temperature and humidity</th><td>0-40°C, 20-80%</td></tr><tr><th>Storage temperature and humidity</th><td>-20°C~60°C, 10-90%</td></tr><tr><th>Compatibility with operating system</th><td>Windows 7 or later, macOS 10.12 or later, Android（USB3.1 DP1.2), Linux</td></tr> </tbody> </table><p> </p> <h3>Digital stylus</h3> <table> <tbody> <tr><th>Stylus</th><td>PW517</td></tr><tr><th>Pen technology</th><td>Battery-free electromagnetic resonance</td></tr><tr><th>Resolution</th><td>5080LPI</td></tr><tr><th>Pressure sensitivity</th><td>8192 levels</td></tr><tr><th>Tilt support</th><td>±60°</td></tr><tr><th>Detection height</th><td>10 mm</td></tr><tr><th>Reporting speed</th><td>＞220PPS</td></tr><tr><th>Accuracy</th><td>±0.3 mm （center）. ±2 mm (corner)</td></tr> </tbody> </table> </div>

Kui ühendate seadme kodus Immax NEO Smart pistikupessa~saate Immax NEO PRO nutirakenduse kaudu neid seadmeid mugavalt eemalt kontrollida~jälgida ja juhtida. Automatiseerida seadmete sisselülitamist või jälgida energiatarbimist. Usaldusväärne pistik (tüüp F - ilma maandustihvta, kahe külgse maandusribaga)~mis säästab aega ja energiat~lisaks varustatud praktiliste väljunditega 1x USB-A ja 1x USB-C parameetritega 5.0V~5V/3.4A maks ja Power Delivery 20W funktsiooniga. Võimaldab mugavat mobiilseadmete või teiste USB-ühilduvate seadmete laadimist. Seade kasutab Tuya Zigbee platvormi~mis tagab laia ühilduvuse nutikodu süsteemidega ja võimaluse integreerimiseks erinevatesse automatiseeritud stsenaariumitesse. Rakendusega ühendamiseks on vajalik Tuya Zigbee nutivärav. Võimalus koheseks ligipääsuks ühendatud seadmetele – tõeliselt igast maailma nurgast. Tehnilised andmed: Nimipinge: AC 230V ± 10% ~50/60 Hz. Maksimaalne koormus: 3200W~16A. USB-väljund: 20W. Power Delivery: JAH. USB-A: 9V/2.2A~12V/1.67A. USB-C: 9V/2.2A~12V/1.67A. USB-A + USB-C: 9V/1.1A ; 12V/0.84A maks (5V/3.4A maks). Ülepinge kaitse: 265V. Alapinge kaitse: 90V. Võrgu ooterežiimi tarbimine (Pnet): kuni 1W. Zigbee kordaja: JAH. Protokoll: Zigbee 3.0. Sagedus: 2400MHz~2483.5MHz. Maksimaalne RF-väljundvõimsus: Zigbee: 10 dBm - maks. 19 dBm. Traadita ulatus: 30 m (avatud alal)~5 m hoonestatud alal. Töötemperatuur: 0 °C ~ 40 °C (32 ° F ~ 104 ° F). Tööniiskus: 10% ~ 90%. Rakenduse funktsioonid: SISSE / VÄLJA~Taimer~Tagasiloendus~Energiatarbimise mõõtmine.

The Intenso W30AC power adapter is a versatile and efficient charging solution for all your mobile devices. Designed specifically for cellular phones and tablets, it features advanced charging technologies including PD/PPS, Power Delivery 3.0, and Qualcomm Quick Charge 4.0, ensuring your devices charge quickly and efficiently. With an input connector of Europlug type and dual output connectors (24-pin USB-C and 4-pin USB Type-A), it offers the flexibility to charge multiple devices at once. Delivering up to 30 W of power, the W30AC minimizes the time your devices need to be plugged in, freeing you up to focus on what matters most. Additionally, its compliance with UKCA and WEEE 2012/19/EC standards demonstrates Intenso's commitment to environmental sustainability, making the W30AC not just a smart choice for your charging needs, but also a responsible one.

Discover the Intenso W20C, a power adapter designed to keep your cellular phone and tablet charged and ready for any challenge. With its incorporation of PD/PPS, Power Delivery 3.0, and Qualcomm Quick Charge 4.0 technologies, the W20C offers fast and efficient charging, ensuring your devices receive the power they need, when they need it. The adapter features a 20 Watt power output, capable of adjusting the voltage provided to suit a variety of charging needs, from 5 V up to 12 V.Crafted with a durable plastic exterior and compliant with both UKCA and WEEE 2012/19/EC standards, the W20C is not only robust but also meets high safety and environmental regulations. Its design includes a single Europlug input and a 24 pin USB-C output connector, making it highly compatible with a wide range of devices. Whether you're at home or on-the-go, the Intenso W20C is the reliable power source your devices deserve.

The CI-01 Multicard Reader from Inter-Tech can read almost all currently common memory cards and transfer their data via USB 2.0, with a maximum data transfer rate of 480 Mbit/s. The built-in USB 3.2 Gen 1 port also offers the option of transferring data, e.g. from removable storage devices, at 5 Gbit/s. It is connected via an internal 19-pin USB 3.2 Gen 1 header. All you need is a free 3.5" bay to add a practical component to your PC.

<p> <span style="font-size: 12px;">Selle standardsete mõõtmetega keystone moodulit saab seda kasutada hõlpsaks snap-in paigaldamiseks nt. . Keystone'i kattepaneelides, esiplaatides või pindpaigalduskarpides.</span></p> <p> <span style="font-size: 12px;"><br /> </span></p> <p> <span style="font-size: 12px;">Spetsifikatsioon</span></p> <p> <span style="font-size: 12px;">• Pistik: USB 3.0 A emane > USB 3.0 A emane</span></p> <p> <span style="font-size: 12px;">• Keystone'i portidele 19,2 x 14,9 mm</span></p> <p> <span style="font-size: 12px;">• Pin-paigutus:</span></p> <p> <span style="font-size: 12px;"><br /> </span></p> <p> <span style="font-size: 12px;">5 SSRX - 6</span></p> <p> <span style="font-size: 12px;">6 SSRX + 5</span></p> <p> <span style="font-size: 12px;">8 SSTX - 9</span></p> <p> <span style="font-size: 12px;">9 SSTX + 8</span></p> <p> <span style="font-size: 12px;"><br /> </span></p> <p> <span style="font-size: 12px;">• Mõõdud (PxLxK): 35,2 x 17,3 x 22,3 mm</span></p> <p> <span style="font-size: 12px;"><br /> </span></p> <p> <span style="font-size: 12px;">Pakendi sisu</span></p> <p> <span style="font-size: 12px;">• Keystone moodul</span></p>

<div> Seda Delocki moodulit saab kasutada näiteks USB-kaabli pikendamiseks. Tänu oma standardiseeritud mõõtmetele saab seda kasutada lihtsaks paigaldamiseks, nt Keystone-pistikupaneelile, näoplaadile või pinnapealsele paigalduskarbile.</div> <div> </div> <div> </div> <div> Spetsifikatsioon</div> <div> - Liitmikud:</div> <div> 1 x USB 3.0 Type-A female ></div> <div> 1 x USB 3.0 Type-A emas</div> <div> - Kontaktid kullatud</div> <div> - Pinnide määramine:</div> <div> 5 SSRX- 8</div> <div> 6 SSRX+ 9</div> <div> 8 SSTX- 5</div> <div> 9 SSTX+ 6</div> <div> - 19,2 x 14,9 mm suuruste Keystone-portide puhul</div> <div> - Mõõtmed (LxSxK): ca. 35,2 x 22,3 x 17,1 mm</div> <div> </div> <div> Pakendi sisu</div> <div> - Keystone-moodul</div>

<div> Seda Delocki moodulit saab kasutada näiteks USB-kaabli pikendamiseks. Tänu oma standardiseeritud mõõtmetele saab seda kasutada lihtsaks kinnitamiseks, nt Keystone-pastapaneelile, näoplaadile või pinnapealsele karbile. Lühikese, nurgelise kaabli paigaldussügavus on väike ja võimaldab paigaldada seda ruumi säästvalt raskesti ligipääsetavates kohtades seadmetes või kaablikanalites.</div> <div> </div> <div> </div> <div> Spetsifikatsioon</div> <div> - Liitmikud:</div> <div> välised: USB 3.0 tüüp A (emane): USB 3.0 tüüp A (emane)</div> <div> sisemine: USB 3.0 tüüp A isane</div> <div> - Kontaktid kullatud</div> <div> - Kaabli gabariit:</div> <div> 30 AWG andmeliin</div> <div> 24 AWG toiteliin</div> <div> - 19,2 x 14,9 mm suuruste Keystone-portide jaoks.</div> <div> - Värv: must</div> <div> - Pikkus koos pistikutega: ca. 50 cm</div> <div> </div> <div> </div> <div> Pakendi sisu</div> <div> - Keystone-moodul koos kaabliga</div>

<div> Seda Delocki moodulit saab kasutada näiteks USB-kaabli pikendamiseks. Tänu oma standardiseeritud mõõtmetele saab seda kasutada lihtsaks paigaldamiseks, nt Keystone-pistikupaneelile, näoplaadile või pinnapealsele paigalduskarbile. Lühike, nurgeline kaabel on väikese paigaldussügavusega ja võimaldab paigaldada seda ruumi säästvalt raskesti ligipääsetavates kohtades seadmetes või kaablikanalites.</div> <div> </div> <div> </div> <div> Spetsifikatsioon</div> <div> Liitmikud:</div> <div> välised: USB 3.0 tüüp A (emane): USB 3.0 tüüp A (emane)</div> <div> sisemine: USB 3.0 tüüp A isane</div> <div> Kontaktid kullatud</div> <div> Kaabli gabariit:</div> <div> 30 AWG andmeliin</div> <div> 24 AWG toiteliin</div> <div> 19,2 x 14,9 mm suuruste Keystone-portide jaoks.</div> <div> Värv: valge</div> <div> Pikkus koos pistikutega: ca. 50 cm</div> <div> </div> <div> Pakendi sisu</div> <div> Keystone-moodul koos kaabliga</div>

If you have a modern case with USB 3.0 device connectivity but your motherboard does not have a suitable internal USB 3.0 header, this adapter can help ensure your case ports do not go unused. With this approximately 15 cm long black cable, you can convert the case's USB 3.0 connector (19-pin, female) into a USB 2.0 connector (8-pin, female) that fits onto a motherboard header for up to two USB 2.0 ports. Of course, only the maximum transfer rates of the USB 2.0 standard are achievable.

<div> Seda Delocki USB Power Delivery (PD) laadija saab kasutada USB Type-C™ ühendusega sülearvutite laadimiseks. See pakub erinevaid pingeid alates 5 V kuni 20 V ja võimsust kuni 85 W. Lisaks on nutitelefonide jaoks saadaval 3 5 V USB Type-A pistikut koos Qualcomm Quick Charge 3.0 laadimistehnoloogiaga.</div> <div> Tänu spetsiaalsele laadimistehnoloogiale saab toiteallikat kasutada ka tavaliste sülearvutite toiteks. Kaasas on 11 erinevat alalisvooluadapterit, mis sobivad erinevatele sülearvutitele. Selle mitmekülgse toiteallikaga saab kõiki mobiilseadmeid laadida ühest pistikupesast.</div> <div> </div> <div> </div> <div> Märkus</div> <div> Ühildub järgmistega:</div> <div> N04 19 V 4,8 x 1,7 x 10,7 mm</div> <div> HP/Compaq: 18,5 V / 2,7 A, 18,5 V / 3,5 A</div> <div> Delta: 19 V / 2,64 A</div> <div> ASUS: 19 V / 2,64 A</div> <div> NEC: 19 V / 2,64 A</div> <div> N07 19 V 5,5 x 2,5 x 10,7 mm</div> <div> Dell: 19 V / 3,16 A, 19 V / 3,42 A</div> <div> Delta: 19 V / 2,64 A</div> <div> Toshiba: 19 V / 3,16 A, 19 V / 3,42 A</div> <div> LiteOn: 19 V / 3,16 A, 19 V / 3,42 A</div> <div> NEC: 19 V / 2,64 A, 19 V / 3,16 A</div> <div> Gateway: 19 V / 3,16 A, 19 V / 3,42 A</div> <div> N09 19,5 V 6,0 x 4,3 x 10,7 mm</div> <div> Sony: 19,5 V / 2,7 A, 19,5 V / 3 A</div> <div> Fujitsu: 19 V / 3,16 A</div> <div> N11 19 V 5,5 x 1,7 x 10,7 mm</div> <div> Acer: 19 V / 3,42 A</div> <div> Delta: 20 V / 3,5 A</div> <div> N18 19 V 5,5 x 2,1 x 10,7 mm</div> <div> Acer: 19 V / 3,16 A, 19 V / 3,42 A</div> <div> LiteOn: 19 V / 3,16 A, 19 V / 3,42 A</div> <div> NEC: 19 V / 3,16 A</div> <div> N19 19 V 5,5 x 3,0 x 10,7 mm</div> <div> Samsung: 19 V / 3,16 A</div> <div> N22 19,5 V 7,4 x 5,0 x 12,5 mm</div> <div> Dell: 19,5 V / 3,34 A, 19,5 V / 4,62 A</div> <div> N23 18,5 V 7,4 x 5,0 x 12,5 mm</div> <div> HP/Compaq: 18,5 V / 3,5 A</div> <div> N24 20 V 7,9 x 5,5 x 0,9 mm</div> <div> IBM/Lenovo: 20 V / 3,25 A</div> <div> N35 20 V 11 x 5,6 x 11 mm</div> <div> Lenovo: 20 V / 2,25 A, 20 V / 3,25 A</div> <div> N36 19,5 V 4,5 x 3,0 mm</div> <div> HP: 19,5 V / 2,31 A, 19,5 V / 3,33 A</div> <div> </div> <div> </div> <div> Spetsifikatsioon</div> <div> Ühendused:</div> <div> 1 x USB Type-C™ emissioon</div> <div> 3 x USB Type-A emissioon</div> <div> 1 x IEC-60320-C8 pesa</div> <div> Sisend: AC 100 ~ 240 V / 50 ~ 60 Hz / 2 A</div> <div> Väljund:</div> <div> Power Delivery (PD): USB Type-C™ Power Delivery (PD): 5 V</div> <div> 5 V / 4 A, 9 V / 12 V / 15 V / 20 V 4,3 A</div> <div> USB Type-A Qualcomm Quick Charge 3.0 Class A:</div> <div> 3,6 ~ 6,5 V / 3 A, 9 V / 2 A, 12 V / 1,5 A</div> <div> Väljundvõimsus: max. 87 W kokku</div> <div> Ülekoormuse kaitse</div> <div> Ülevoolukaitse</div> <div> Ülekuumenemiskaitse</div> <div> Kaitse lühise eest</div> <div> Värv: must</div> <div> Mõõtmed (LxSxK): ca. 110 x 98 x 20 mm</div> <div> </div> <div> Pakendi sisu</div> <div> USB-laadimisjaam</div> <div> Toitejuhe</div> <div> Kott</div> <div> Statiiv</div> <div> USB Type-C™ PD-kaabel, pikkus ca. 1 m</div> <div> USB Type-C™ alalisvoolu kaabel, pikkus ca. 1 m</div> <div> 11 x alalisvooluadapter</div> <div> Kasutusjuhend</div>

<div> Seda Delocki USB Power Delivery (PD) laadija saab kasutada USB Type-C™ ühendusega sülearvutite laadimiseks. See pakub erinevaid pingeid alates 5 V kuni 20 V ja võimsust kuni 85 W. Lisaks on nutitelefonide jaoks saadaval 3 USB Type-A 5 V ühenduspesa Qualcomm Quick Charge 3.0 laadimistehnoloogiaga.</div> <div> Tänu spetsiaalsele laadimistehnoloogiale saab toiteallikat kasutada ka tavaliste sülearvutite toiteks. Kaasas on 11 erinevat alalisvooluadapterit, mis sobivad erinevatele sülearvutitele. Selle mitmekülgse toiteallikaga saab kõiki mobiilseadmeid laadida ühest pistikupesast.</div> <div> </div> <div> </div> <div> Märkus</div> <div> Ühildub järgmistega:</div> <div> N04 19 V 4,8 x 1,7 x 10,7 mm</div> <div> HP/Compaq: 18,5 V / 2,7 A, 18,5 V / 3,5 A</div> <div> Delta: 19 V / 2,64 A</div> <div> ASUS: 19 V / 2,64 A</div> <div> NEC: 19 V / 2,64 A</div> <div> N07 19 V 5,5 x 2,5 x 10,7 mm</div> <div> Dell: 19 V / 3,16 A, 19 V / 3,42 A</div> <div> Delta: 19 V / 2,64 A</div> <div> Toshiba: 19 V / 3,16 A, 19 V / 3,42 A</div> <div> LiteOn: 19 V / 3,16 A, 19 V / 3,42 A</div> <div> NEC: 19 V / 2,64 A, 19 V / 3,16 A</div> <div> Gateway: 19 V / 3,16 A, 19 V / 3,42 A</div> <div> N09 19,5 V 6,0 x 4,3 x 10,7 mm</div> <div> Sony: 19,5 V / 2,7 A, 19,5 V / 3 A</div> <div> Fujitsu: 19 V / 3,16 A</div> <div> N11 19 V 5,5 x 1,7 x 10,7 mm</div> <div> Acer: 19 V / 3,42 A</div> <div> Delta: 20 V / 3,5 A</div> <div> N18 19 V 5,5 x 2,1 x 10,7 mm</div> <div> Acer: 19 V / 3,16 A, 19 V / 3,42 A</div> <div> LiteOn: 19 V / 3,16 A, 19 V / 3,42 A</div> <div> NEC: 19 V / 3,16 A</div> <div> N19 19 V 5,5 x 3,0 x 10,7 mm</div> <div> Samsung: 19 V / 3,16 A</div> <div> N22 19,5 V 7,4 x 5,0 x 12,5 mm</div> <div> Dell: 19,5 V / 3,34 A, 19,5 V / 4,62 A</div> <div> N23 18,5 V 7,4 x 5,0 x 12,5 mm</div> <div> HP/Compaq: 18,5 V / 3,5 A</div> <div> N24 20 V 7,9 x 5,5 x 0,9 mm</div> <div> IBM/Lenovo: 20 V / 3,25 A</div> <div> N35 20 V 11 x 5,6 x 11 mm</div> <div> Lenovo: 20 V / 2,25 A, 20 V / 3,25 A</div> <div> N36 19,5 V 4,5 x 3,0 mm</div> <div> HP: 19,5 V / 2,31 A, 19,5 V / 3,33 A</div> <div> </div> <div> </div> <div> Spetsifikatsioon</div> <div> - Ühendused:</div> <div> 1 x USB Type-C™ female</div> <div> 3 x USB Type-A emissioon</div> <div> 1 x IEC-60320-C8 pesa</div> <div> - Sisend: AC 100 ~ 240 V / 50 ~ 60 Hz / 2 A</div> <div> - Väljund:</div> <div> Power Delivery (PD): USB Type-C™ Power Delivery (PD): 5 V</div> <div> 5 V / 4 A, 9 V / 12 V / 15 V / 20 V 4,3 A</div> <div> USB Type-A Qualcomm Quick Charge 3.0 Class A:</div> <div> 3,6 ~ 6,5 V / 3 A, 9 V / 2 A, 12 V / 1,5 A</div> <div> - Väljundvõimsus: max. 87 W kokku</div> <div> - Ülekoormuse kaitse</div> <div> - Ülevoolukaitse</div> <div> - Ülekuumenemiskaitse</div> <div> - Kaitse lühise eest</div> <div> - Värv: valge</div> <div> - Mõõtmed (LxSxK): ca. 110 x 98 x 20 mm</div> <div> </div> <div> </div> <div> Pakendi sisu</div> <div> - USB-laadimisjaam</div> <div> - Toitejuhe</div> <div> - Kott</div> <div> - Alus</div> <div> - USB Type-C™ PD-kaabel, pikkus ca. 1 m</div> <div> - USB Type-C™ alalisvoolu kaabel, pikkus ca. 1 m</div> <div> - 11 x alalisvooluadapter</div> <div> - Kasutusjuhend</div>

<p>See Delocki pesa kinnitusklamber laiendab arvutit kahe USB 3.0 Type-A emasportiga. Pesa klambri kaabli saab ühendada emaplaadi sisemiselt 19-poolse USB 3.0 ühendusega. Sellega viiakse sisemine ühendus väljapoole, et ühendada USB Type-A pistikuga seadmeid arvutiga.</p>

<div> See Delocki PCI Express kaart laiendab arvutit kahe sisemise USB 3.0 piniotsikuga. Kaardiga saab ühendada erinevaid USB-seadmeid, nagu dokkimisjaamad, kaardilugejad, välised korpused jne, kasutades selleks valikulist kaablit.</div> <div> </div> <div> USB-portide valikuline laiendamine</div> <div> PCIe-kaart võimaldab arvuti esiküljel või pistikupesa klambril asuvate väliste USB-portide laiendamist lisakaablite, pistikupesa klambrite või esipaneelide abil.</div> <div> </div> <div> </div> <div> Spetsifikatsioon</div> <div> Ühendused:</div> <div> 2 x 19-pooluseline USB 3.0 pistikupesa isendiga</div> <div> 1 x PCI Express x1, V2.0</div> <div> 1 x SATA 15-poolne toitepistik</div> <div> Kiibistik: VIA VL805</div> <div> Andmeedastuskiirus kuni:</div> <div> SuperSpeed 5 Gbps,</div> <div> Hi-Speed 480 Mbit/s,</div> <div> Full-Speed 12 Mbit/s,</div> <div> Madala kiirusega 1,5 Mbit/s</div> <div> Toetab xHCI spetsifikatsiooni V1.0</div> <div> Toetab UASP</div> <div> </div> <div> Süsteeminõuded</div> <div> Linuxi tuum 4.9.4 või uuemad versioonid</div> <div> Windows 7/7-64/8.1/8.1-64/10/10-64</div> <div> Arvuti, millel on üks vaba PCI Expressi pesa</div> <div> </div> <div> Paketi sisu</div> <div> PCI Express kaart</div> <div> Madala profiiliga klamber</div> <div> Kasutusjuhend</div>

19" 1U RACK server cases from Lanberg Lanberg is launching a new family of RACK 19" 1U server cases, which can be easily used in a production server room, company office, semi-professional workshop, and even in a home NAS system or hobbyist's laboratory. Each case has been designed so that customers can configure a server to suit their exact needs - from a miniature cluster based on Mini-ITX 19 to powerful, multi-processor configurations. As a result, a single product line offers solutions for both the PRO segment and the consumer market, and server cases for RACK cabinets are now available to everyone. The flat 1U height allows for installation in compact, including hanging, 19" RACK cabinets, which saves space in the office, home, or garage. Lanberg opted for a flat design, but did not compromise: all models offer broad compatibility with various motherboard standards, from Mini-ITX to E-ATX and SSI EEB. An airy front, adjustable PWM fans, numerous slots for hard drives and SSDs, solid 1.0 mm galvanized steel, a rich I/O panel, and a package of useful accessories - these are the elements that unite all Lanberg 1U RACK cases into one coherent family. Supported motherboards: ATX, Micro-ATX, Mini-ITX, and SSI CEBThe SC01-4201-10B model is the golden mean - a 1U 19" RACK server case that combines a compact format with enormous flexibility. A wide selection of motherboards allows you to choose a configuration for a specific system - from a virtualization server to a multi-disk NAS. The presented model supports compact Mini-ITX and Micro-ATX motherboards, as well as full-size ATX and specialized SSI CEB server motherboards, allowing for much greater configuration freedom. However, the 1U height requires careful selection of CPU cooling: low TDP processors or passive cooling and short, efficient heat sinks are recommended to avoid thermal throttling and maintain a stable operating temperature. Effective cooling - 4 powerful 40 mm PWM fansThe SC01-4201-10B uses four 40 mm PWM fans with a range of 4000-8000 RPM, a noise level of only 24 dB, and an impressive service life of 50,000 hours. These parameters ensure quiet and efficient system operation for a long time. The perforated front and intelligent PWM control ensure constant airflow, maintaining a stable temperature for both data storage devices and the motherboard. This means that even in continuous operation mode, the server remains cool, stable, and ready for action without the risk of overheating components. Easy expansion thanks to space for 2 x 3.5" HDDs or 2 x 2.5" SSDsThe SC01-4201-10B provides 2 drive bays by default - depending on your needs, you can install 2 high-capacity 3.5" HDDs or 2 fast 2.5" SSDs. This solution allows you to create high-capacity RAID arrays and flexibly combine different types of storage - from fast system drives to platter-based archival drives. What's more, by using shorter FLEX power supply models, it is possible to gain space for an additional 2.5" SSD, which gives even greater configuration freedom and allows you to increase the total capacity of the system without sacrificing the compact 1U form factor. This allows users to easily tailor the drive layout to their own scenarios - from a simple file server to a multi-tasking office server. Robustly constructed server cases: durability and damage resistanceEach Lanberg RACK 1U server case is made of 1.0 mm thick galvanized steel, which significantly exceeds the industry standard and distinguishes it from competing solutions. The greater thickness of the material translates into higher mechanical resistance - the chassis effectively protects components from deformation, accidental impacts, and micro-vibrations, which in the long term could affect the stability of the server. The robust design is also less susceptible to wear and tear during many years of operation, frequent assembly and disassembly in RACK cabinets, or transport between locations. As a result, the device not only protects components from external factors such as dust or shocks, but also ensures the durability and reliability of the server infrastructure for many years of intensive use. Connect multiple components to a rich I/O panelThe front panel of the case features two USB 3.0 Type-A ports and Power and Reset buttons, making it extremely convenient to quickly connect a flash drive, external drive, or service keyboard. The front I/O panel saves the administrator time and facilitates system configuration, firmware updates, and diagnostics-without having to reach behind the case or manipulate cables in hard-to-reach places. It is a simple yet extremely practical solution that speeds up server operation and maintenance. Dedicated accessories for the appropriate power supply and installation in 19" RACK cabinetsSC01-4201-10B includes a 4-PIN PWM splitter for connecting several fans and precise control of their operation, a set of M6 screws for stable mounting in a standard RACK cabinet, a replaceable front dust filter that protects the interior from dirt, and FLEX power supply brackets up to 220 mm long, which ensure compatibility with a wide range of power supply units. This equipment eliminates the need to purchase additional accessories and allows for efficient, safe installation of the entire server in a matter of minutes. Thanks to this family of RACK 19" 1U server cases from Lanberg, every company, home enthusiast, or professional server room can build a stable, cooled, and efficient tailor-made system from a simple NAS to an advanced computing station. Everything is available immediately from Lanberg's online stores and brick-and-mortar retail partners.

19" 1U RACK server cases from Lanberg Lanberg is launching a new family of RACK 19" 1U server cases, which can be easily used in a production server room, company office, semi-professional workshop, and even in a home NAS system or hobbyist's laboratory. Each case has been designed so that customers can configure a server to suit their exact needs - from a miniature cluster based on Mini-ITX 19 to powerful, multi-processor configurations. As a result, a single product line offers solutions for both the PRO segment and the consumer market, and server cases for RACK cabinets are now available to everyone. The flat 1U height allows for installation in compact, including hanging, 19" RACK cabinets, which saves space in the office, home, or garage. Lanberg opted for a flat design, but did not compromise: all models offer broad compatibility with various motherboard standards, from Mini-ITX to E-ATX and SSI EEB. An airy front, adjustable PWM fans, numerous slots for hard drives and SSDs, solid 1.2 mm galvanized steel, a rich I/O panel, and a package of useful accessories - these are the elements that unite all Lanberg 1U RACK cases into one coherent family. Supported motherboards: E-ATX, ATX, Micro-ATX, Mini-ITX, SSI CEB, SSI EEBFor the most demanding users, Lanberg has prepared the SC01-6501-12B model - one of the few 1U RACK enclosures capable of accommodating E-ATX and SSI EEB boards and several PCI expansion cards. This is an option for enthusiasts who want to build a server with high computing power while maintaining a minimum height of 1U. As with other 1U models, the choice of processor and cooling should be considered in terms of limited space and operating temperature optimization. Advanced cooling - 8 x 40 mm PWM fansThe top-of-the-line 1U SC01-6501-12B model features 8 x 40 mm PWM fans (with the option to install two additional fans on the rear panel of the chassis) that maintain high airflow. Speed control in the range of 4000-8000 RPM and a maximum noise level of 24 dB allow for low noise levels while effectively cooling high-power components even under prolonged load. Easy expansion thanks to space for multiple hard drives and SSDsThe SC01-6501-12B in its standard configuration offers 4 drive bays - users can choose to install 4 high-capacity 3.5" HDDs or 4 fast 2.5" SSDs. This provides a solid foundation for creating a large RAID array or a flexible combination of storage devices for various purposes. Importantly, thanks to the use of a suitably short FLEX power supply, it is possible to add another 2.5" SSD drive, which increases the total storage space without interfering with the compact design of the case. An additional advantage is the possibility of installing one more SSD drive if the user chooses a smaller motherboard - Micro-ATX or Mini-ITX - which frees up additional space inside the case. As a result, the SC01-6501-12B allows for the installation of up to 6 storage devices, providing tremendous flexibility when building advanced file servers, complex NAS systems, or virtualization environments. Robustly constructed server cases: durability and damage resistanceEach Lanberg RACK 1U server case is made of 1.2 mm thick galvanized steel, which significantly exceeds the industry standard and distinguishes it from competing solutions. The greater thickness of the material translates into higher mechanical resistance - the chassis effectively protects components from deformation, accidental impacts, and micro-vibrations, which in the long term could affect the stability of the server. The robust design is also less susceptible to wear and tear during many years of operation, frequent assembly and disassembly in RACK cabinets, or transport between locations. As a result, the device not only protects components from external factors such as dust or shocks, but also ensures the durability and reliability of the server infrastructure for many years of intensive use. Connect multiple components to a rich I/O panelThe front panel of the case features two USB 3.0 Type-A ports and Power and Reset buttons, making it extremely convenient to quickly connect a flash drive, external drive, or service keyboard. The front I/O panel saves the administrator time and facilitates system configuration, firmware updates, and diagnostics-without having to reach behind the case or manipulate cables in hard-to-reach places. It is a simple yet extremely practical solution that speeds up server operation and maintenance. Dedicated accessories for the appropriate power supply and installation in 19" RACK cabinetsThe SC01-6501-12B is a truly complete kit, providing users with everything they need for quick and stable installation. The box contains two 4-PIN PWM splitters, allowing you to connect multiple fans and conveniently manage their speed, a set of sturdy M6 screws for secure mounting in a RACK cabinet, and a replaceable dust filter that protects the interior of the case from contamination and extends the life of the components. The set is complemented by a special bracket that allows the installation of a FLEX power supply with a length of up to 330 mm - this allows the use of powerful, high-efficiency units capable of handling the most demanding dual-CPU configurations with multiple drives and expansion cards. This set of accessories gives you complete freedom in building your server and eliminates the need to purchase additional components, which will be appreciated by both professionals and advanced enthusiasts. Dzięki tej rodzinie obudów serwerowych RACK 19" 1U od Lanberga każda firma, domowy entuzjasta czy profesjonalna serwerownia zbuduje stabilny, chłodzony i wydajny system skrojony na miarę - od prostego NAS-a po zaawansowaną stację obliczeniową. Wszystko dostępne od ręki sklepach internetowych i stacjonarnych partnerów handlowych Lanberg.

19" 1U RACK server cases from Lanberg Lanberg is launching a new family of RACK 19" 1U server cases, which can be easily used in a production server room, company office, semi-professional workshop, and even in a home NAS system or hobbyist's laboratory. Each case has been designed so that customers can configure a server to suit their exact needs - from a miniature cluster based on Mini-ITX 19 to powerful, multi-processor configurations. As a result, a single product line offers solutions for both the PRO segment and the consumer market, and server cases for RACK cabinets are now available to everyone. The flat 1U height allows for installation in compact, including hanging, 19" RACK cabinets, which saves space in the office, home, or garage. Lanberg opted for a flat design, but did not compromise: all models offer broad compatibility with various motherboard standards, from Mini-ITX to E-ATX and SSI EEB. An airy front, adjustable PWM fans, numerous slots for hard drives and SSDs, solid 1.0 mm galvanized steel, a rich I/O panel, and a package of useful accessories - these are the elements that unite all Lanberg 1U RACK cases into one coherent family. Minimum size, maximum usability - Mini-ITX standardThe SC01-3001-10B model is an ultra-compact 1U RACK server case that supports Mini-ITX motherboards only. Thanks to its small dimensions, it is ideal for projects where space savings and energy efficiency are key - it is an excellent base for a file server, router, or even a Raspberry Pi cluster for testing and educational purposes. One PCI port allows for expansion with a 10 Gb/s network card or hot-swap controller, which significantly increases configuration options. Its small size means that the SC01-3001-10B fits easily into a small 19" rack cabinet, offering professional features in a compact form. Effective cooling - 4 powerful 40 mm PWM fansThe SC01-3001-10B uses four 40 mm PWM fans with a range of 4000-8000 RPM, a noise level of only 24 dB, and an impressive service life of 50,000 hours. These parameters guarantee quiet and efficient system operation for a long time. The perforated front and intelligent PWM control ensure constant airflow, maintaining a stable temperature for both data storage devices and the motherboard. This means that even in continuous operation mode, the server remains cool, stable, and ready for action without the risk of overheating components. Supports 1 HDD or 1 SSDThe SC01-3001-10B model can accommodate one 2.5 drive or one 3.5 drive, giving users flexibility in their choice of media from fast SSDs to high-capacity hard drives. As a result, the chassis offers compact yet sufficient storage space, ideal for creating a basic NAS for a home network, backup server, or even a small multimedia library. Its small dimensions allow for easy placement of the equipment in an office, living room, or IT cabinet without taking up a lot of space. Despite its modest size, the user gains a stable and secure solution for storing the most important files and centralizing data access. With the appropriate power supply configuration, it is possible to install an additional SSD drive. Robustly constructed server cases: durability and damage resistanceEach Lanberg RACK 1U server case is made of 1.0 mm thick galvanized steel, which significantly exceeds the industry standard and distinguishes it from competing solutions. The greater thickness of the material translates into higher mechanical resistance - the chassis effectively protects components from deformation, accidental impacts, and micro-vibrations, which in the long term could affect the stability of the server. The robust design is also less susceptible to wear and tear during many years of operation, frequent assembly and disassembly in RACK cabinets, or transport between locations. As a result, the device not only protects components from external factors such as dust or shocks, but also ensures the durability and reliability of the server infrastructure for many years of intensive use. Connect multiple components to a rich I/O panelThe front panel of the case features two USB 3.0 Type-A ports and Power and Reset buttons, making it extremely convenient to quickly connect a flash drive, external drive, or service keyboard. The front I/O panel saves the administrator time and facilitates system configuration, firmware updates, and diagnostics-without having to reach behind the case or manipulate cables in hard-to-reach places. It is a simple yet extremely practical solution that speeds up server operation and maintenance. Dedicated accessories for the appropriate power supply and installation in 19" RACK cabinetsSC01-3001-10B includes a 4-PIN PWM splitter for connecting several fans and precise control of their operation, a set of M6 screws for stable mounting in a standard RACK cabinet, a replaceable front dust filter that protects the interior from dirt, and FLEX power supply brackets up to 200 mm long, which ensure compatibility with a wide range of power supply units. This equipment eliminates the need to purchase additional accessories and allows for efficient, safe installation of the entire server in a matter of minutes. Thanks to this family of RACK 19" 1U server cases from Lanberg, every company, home enthusiast, or professional server room can build a stable, cooled, and efficient tailor-made system - from a simple NAS to an advanced computing station. Everything is available immediately from Lanberg's online stores and brick-and-mortar retail partners.

100W40Gbps8k60HzSoft TPE JacketWorks with Thunderbolt 4Supports DP1.4 altmode and displaylink With this Premium MicroConnect USB-C cable you can now go all-in with a fully specced Gen2 USB-C cable, capable of 40Gbps datas transfers, 100W of Power Delivery, 20V/5A of Fast-Charging performance, and even 5120 × 2880p Ultra HD 5K video output at 60Hz!This USB 4 Cable (Type-C Male to Male) connects between two USB Type-C devices for the fastest possible data transfer and charging rates available. Precision data transfers and power delivery mean this cable supports PD100W for 100W of Power Delivery charging - perfect for charging USB devices.The Soft TPE Jacket also ensures a premium touch and feel to the cable while keeping the cable nice and durable. Warranty (Month(s)): 300Net Weight (Product,kg): 0,015Height (Product,cm): 19,0Width (Product,cm): 9,0Depth (product,cm): 0,5Gross Weight (Package,kg): 0,025Cable length (m): 0,5Conductor material: CopperConnector 1: USB CConnector 1 form factor: StraightConnector 1 gender: MaleConnector 2: USB CConnector 2 form factor: StraightConnector 2 gender: MaleProduct colour: BlackUNSPSC Code: 43211617USB Power Delivery (USB PD): YesUSB Power Delivery revision: 3.0USB Power Delivery up to (W): 100,0USB version: USB4 Gen 3x2

Mini PC Minis Forum NAB6 Lite Intel Core i5-12600H, 16GB+512GBMinis Forum NAB6 Lite is a compact PC designed for those who need full computing power in a small form factor. The Intel® Core™ i5-12600H processor used, with 12 cores and 16 threads, reaches frequencies of up to 4.5 GHz, allowing you to work smoothly with demanding office, design and programming applications. Integrated Intel® Iris® Xe graphics effortlessly support 4K displays, while fast DDR4-3200 MHz memory in a dual-channel configuration and a PCIe 4.0 SSD provide lightning-fast data access and faster boot times. A state-of-the-art cooling system with dual heatpipes and a dual air outlet is responsible for stability, effectively dissipating heat even under prolonged load. Two RJ45 2.5 Gb Ethernet ports and multi-functional USB-C ports with Power Delivery support make it easy to integrate into the network and quickly connect peripherals. Note: the device does not come with Windows installed.Next-generation Intel® Core™ i5-12600H processorThe Minis Forum NAB6 Lite Mini PC is equipped with an Intel® Core™ i5-12600H processor with 12 cores and 16 threads, clocked at up to 4.5 GHz. This is a next-generation unit, providing 24% better single-threaded performance and up to 60% better multi-threaded performance compared to its predecessor, the i5-11500H. As a result, the computer can easily cope with running multiple applications in parallel, image processing, code compilation or high-definition video editing. The user gains smooth operation, faster system response time and greater efficiency in everyday tasks.Versatile ports for every applicationThe computer offers a rich set of ports so you can easily connect all the necessary devices. On the front, you'll find a USB-C 3.2 Gen 1 port for high-speed data transfer, two USB-A 3.2 ports, a 3.5mm Combo Jack audio input and a DMIC microphone input for easy daily use with accessories and headsets. On the back are another two USB-A 3.2 ports, two RJ45 2.5 Gb Ethernet ports for stable network connectivity, two HDMI ports, and USB-C 3.2 with DisplayPort support (video only). This arrangement of ports provides convenient access and full flexibility - from connecting multiple 4K monitors to fast data copying or creating professional workstations.Maximum connection flexibilityThe device provides exceptional freedom of workstation configuration. Thanks to a rich set of ports, you can connect multiple peripherals and up to four monitors at the same time, significantly increasing efficiency for video editing, design, programming or data analysis. Two RJ45 2.5 Gb Ethernet ports guarantee a fast and stable network connection, and display support via a single USB-C cable simplifies cabling and desktop maintenance. The NAB6 Lite's compact design also allows it to be mounted on the back of a monitor, making the computer easy to blend into any workspace - at home, in the office or in the studio.New cooling system for stable operationA new, optimized cooling system effectively keeps components cool even under intense load. Two heat pipes and two air outlets ensure efficient heat dissipation from the processor and other components, resulting in long-lasting, stable computer operation. The design also includes an active SSD heatsink and a side ventilation duct to increase cooling efficiency and protect the drive from overheating. As a result, the NAB6 Lite retains its high performance for both everyday office tasks and environments that require the device to work continuously.Easy upgrade and access to componentsThe MinisForum NAB6 Lite, with 16GB RAM and a 512GB SSD, is ready to go right out of the box, while maintaining full expandability. The tool-free removable top panel allows quick access to the inside of the computer, so expanding RAM (up to 64 GB) or replacing the PCIe 4.0 SSD with a larger one takes just a moment. It's a practical solution for professionals and technology enthusiasts who value not only performance, but also the ability to adapt their hardware to changing needs.Included:Mini PCPower supplyPower cableHDMI cableScrewsVESA mountUser manual ManufacturerMinis ForumModelNAB6 LiteProcessorIntel® Core™ i5-12600H, 12 cores / 16 threadsCache memory: 18 MBClock frequency: up to 4.50 GHzGraphics chipIntegrated Intel® Iris® Xe GraphicsMemoryDDR4 8 GB × 2 (dual-channel)SODIMM × 2 slots, support up to 64 GBStorageM.2 2280 PCIe 4.0 SSD (up to 2 TB)ExpandableSATA 3.0 (6.0 Gbps) - 1 slot for 2.5″ HDDWireless connectivityM.2 2230 slot with Wi-Fi and Bluetooth supportVideo outputsHDMI (4K @ 60 Hz) × 2USB-C (4K @ 60 Hz) × 2Audio outputsHDMI × 23.5 mm (Combo Jack) × 1Ports and interfacesRJ45 2.5 Gigabit Ethernet × 2USB 3.2 Gen 1 USB-C × 1 (data only, front)USB 3.2 USB-C × 1 (DisplayPort only)USB 3.2 USB-C × 1 (Alt DP + data + PD Out)USB 3.2 Gen 2 USB-A × 4HDMI × 2DMIC × 13.5 mm Combo × 1Clear CMOS button × 1Power supplyDC 19 V power adapter (included)Operating systemNo pre-installed system