Kõik hinnakirjad

The external network card AXAGON ADE-25RC easily converts USB-C 3.2 Gen 1 (USB 3.0) port to 2.5 Gigabit Ethernet port. It is compatible with 10/100/1000/2500 Mbit/s transfer speeds. The network adapter with 2.5 Gb/s speed expands the computer with a very fast and stable network connection, adds the missing RJ-45 network connector, adds another network card, or replaces the original non-functional network connection. In addition to 2.5 gigabit throughput, the LAN adapter offers a wide range of features, such as IPv4/IPv6 checksum to reduce CPU load by checksums, the crossover detection and auto-correction, TCP large send offload, support for various modes of the Wake-on-LAN feature, the work with virtual LAN (VLAN) and advanced Power Management features. The advantage of the IEEE 802.3bz standard is that standard Cat 5e and Cat 6 Ethernet cables up to 100 m long can be used for 2.5 Gb/s speed. The metal adapter cover is made of aluminum and provides perfect mechanical protection and excellent heat dissipation. Thanks to its compact dimensions and minimal weight, it is an ideal accessory for laptops. The support for current versions of Windows, macOS, and Linux operating systems allows it to be used for any desktop, laptop or ultrabook equipped with a modern double-sided USB Type C connector. In modern operating systems from Windows 8.1 above, the adapter allows easy automatic installation without the need for an Internet connection. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Compatible with Thunderbolt 3 and 4. Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). Connecting USB type C male connector on a 15 cm long permanently attached cable. Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000/2500 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3bz 2.5GBase-T specifications. 10/100/1000/2500 Mb/s auto-detection. NBASE-T specification support - allows speeds up to 2.5 Gbps via standard UTP Cat5e cables. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Other features: Full Plug and Play and Hot Plug support. Supports CDC-ECM for automatic installation of drivers across different OSs. Adapter power supply via USB (bus power) - no auxiliary power supply required. Two LEDs indicate the network activity and connection of the adapter to the network. Dimensions 64 x 24 x 14 mm. Weight 26 g (incl. cable). USB cable length 15 cm. The Realtek RTL8156B chipset is used. Wake-on-LAN feature support in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection and Link Change Wake-up. Supports ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. RealWoW! technology support allows remote wake up over the Internet. Advanced Power Management features:The adapter supports advanced power management to reduce losses during standby or light traffic on the network. It further supports advanced power saving when the Ethernet cable has been disconnected. Supports Advanced Configuration Power Management Interface (ACPI). Supports Power Management offload (ARP & NS). Supports Microsoft Always On Always Connected (AOAC). Supports Intel Converged Platform Power Management (CPPM). Supports Link Power Management (LPM). Supports Operating System-directed Power Management (OSPM). Supports IEEE 802.3az EEE (Energy Efficient Ethernet). Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.6 and later, Linux with kernel 2.6.14 and later. Package contains: 2.5 Gigabit Ethernet adapter with fixed 15 cm long USB-C cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard.

A compact AXAGON ADSA-1S6 SLIMport6 high-speed adapter with USB 3.0 and SATA 6G interface intended for easy connection of SSD or 2.5" SATA disk. A handy tool to quickly connect a SSD or laptop disk, including boot support. The UASP support significantly increases transmission rates especially when working with small files in the queue. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports spinning down of connected disks as well as an adapter. The installation can be handled even by a layman - the disk connects to the adapter and the adapter to the computer's USB port; the rest is done automatically. Minimum dimensions and weight, along with an enclosed disc case, make the product ideally suited even for mobile use. Features: Compatible with USB 3.0 and backward compatible with USB 2.0. Supports transmission rates 12 / 480 / 5000 Mb/s (low / full / high speed). Supports 2.5" SATA III / II / I disks of all capacities. Compliant with Serial ATA 3.1 specification (SATA/600), transmission rates of up to 6 Gb/s. Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB 3.0 interface used (theor. 5 Gbit/s). Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport). Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 22 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB 3.0 micro B female connector. USB 3.0 cable USB 3.0 Type A male / USB 3.0 Type B male 10 cm long is included. Supplying the power via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Compact adapter dimensions 70 x 21 x 10 mm. Adapter weight only 11 g, weight of USB cable 18 g. Simple plastic case holds 2.5" disk max. 9.5 mm high with USB adapter connected (USB cable is led out through hole in the case). For thin 7mm SSDs/HDDs foam pads are included for better fit in the case. The case can also serve to transport or store the adapter itself without the disk, with the USB cable inside the case. Case dimensions 122 x 78 x 19 mm. Case weight 40 g. Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains:USB 3.0 - SATA 6G adapter,USB 3.0 cable 10 cm,plastic case for 2.5" disk and USB adapter,foam pads for 7 mm HDDs and SSDs,printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,Packed in a cardboard box.

SuperSpeed USB 5 Gbps docking / cloning station AXAGON ADSA-D25 CLONE MINI quickly and easily connects up to two 2.5" disks to your computer at the same time. The USB Micro-B connector on the dock and included USB Micro-B USB-A cable enables a connection to computer. This compact helper will allow you easiest connection of any 2.5" SATA drive to computer or notebook. Just insert one or two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB 5 Gbps. Speed up to 5 Gbit/s. Connection via USB Micro-B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface. Supports 2.5" SSD/HDD. Max. disk capacity all without limitation. Max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB Micro-B female connector. USB Micro-B USB-A cable 60 cm long is included. LED indicating SSD/HDD dock power and disk activity in both shafts. Station dimensions 89 x 58 x 59 mm. Weight 137 g. Power: Power cable USB-A 3.5/1.3 mm DC 5V length 1 m is included in the package. The cable allows powering the station from the computer USB-A port or a standard mobile phone charger with a USB-A output of 5V / min. 1A, e.g. AXAGON ACU-DS16. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDD and SSD can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported operating systems: MS Windows 7 / 8 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SSD/HDD dock, USB Micro-B USB-A cable 60 cm long, power cable 100 cm, printed installation manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

<p>Multiport USB-C 3.2 Gen 1 hub AXAGON HMC-HCR3A expands your laptop, computer or phone with four ports and SD / microSD card reader. Through the double-sided USB-C connector, you can easily and quickly connect three USB devices, memory cards and an HDMI display to the computer at the same time. The USB-C hub will provide you with a simple and compact 5in1 docking station for notebook. </p> <p>The USB hub offers three USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc.</p> <p>HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. Popular gaming resolution WQHD 2560 x 1440px at 60Hz or FullHD 1920 x 1080px at 60, 100 and 120Hz max. are also supported. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output.</p> <p>Card reader supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. High data transfer speed ensured by USB 3.2 Gen 1 interface. The card reader enables simultaneous handling of cards in both slots and direct copying between them. </p> <p>Elegant aluminum body ensures mechanical resistance and quality cooling. The finely structured surface with no fingerprint remains will also please you. </p> <p>Port replicator is an ideal accessory for laptops without USB-A connectors, card reader and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. You can connect a flash drive, keyboard, mouse, monitor, TV or projector to your phone.</p> <p><b>Input:</b><br/> 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector.<br/> Backward compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0.<br/> Compatible with Thunderbolt 3.<br/> Connecting USB type C male connector on a fixed 20 cm long cable.</p> <p><b>USB outputs:</b><br/> 3x SuperSpeed USB port, USB-A female connector.<br/> Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed).<br/> The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit/s).<br/> USB-C hub can handle the connection of several external drives at the same time.<br/> Charging of mobile devices (including iPad) with a current of up to 1.5A in each of the hub's USB ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port).</p> <p><b>HDMI output:</b><br/> HDMI.<br/> HDMI A (F) female connector.<br/> Maximum supported resolution 4K / 4096 x 2160 at 30 Hz. <br/> WQHD resolution 2560 x 1440 at 60 Hz max.<br/> FullHD resolution 1920 x 1080 at 60, 100, 120 Hz max.<br/> DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Correct OS is also necessary. The video output function will not be available without these requirements.<br/> HPD (Hot-Plug-Detect) support.<br/> TMDS (Transition Minimized Differential Signalling) support.<br/> HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support.<br/> Support up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio formats.<br/> Support sampling rate up to 192kHz and up to 24-bit audio depends on source and end device, i.e. laptop/phone and TV/monitor/ AV receiver.</p> <p><b>The card reader - two slots:</b><br/> Micro SD slot: microSD / microSDHC / microSDXC / TransFlash,<br/> SD slot: Digital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / microSDHC / microSDXC, MMC Micro.</p> <p><b>The reader supports the following flash card specifications:</b><br/> SD 1.0/1.1 (SD - Secure Digital, up to 2GB).<br/> SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB).<br/> SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB),<br/> MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit).<br/> Supports SD 3.01 and SD Jukebox applications (CPRM functions).<br/> Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s.<br/> Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function.<br/> 2 LUN - the reader is indicated as two disk drives in the file manager.</p> <p><b>Other features:</b><br/> Possibility to connect your device while running thanks to the Hot Plug support.<br/> Full Plug and Play support.<br/> Standby mode support. <br/> Power supply via USB bus (USB bus power).<br/> Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings.<br/> White LED indicates the connection to the computer's USB port.<br/> The high quality shielded cable ensures high communication speed and minimal undesirable interference.<br/> Dimensions 110 x 35 x 12.5 mm. <br/> Weight 58 g (incl. cable).<br/> USB cable length 20 cm.</p> <p><b>Supported operating systems:</b><br/> Microsoft Windows 10, 11, Mac OS, Linux, Android and Chrome OS. <br/>Compatibility depends on used OS and support from device manufacturer.<br/> Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed.<br/> Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. </p> <p><b>Package contains:</b><br/> USB-C hub with fixed 20 cm long cable,<br/> multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA,<br/> packed in a cardboard box with a hanging hole.</p>

<p>The slim USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-F7A with a 1 m long USB cable easily and quickly connects up to seven USB devices to the computer at the same time. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5Gb/s.</p> <p>The metal hub body is made of aluminum and provides perfect mechanical protection. Elegant finely structured body surface against fingerprint. Permanently fixed 1 m long USB-A cable is suitable for use with a desktop computer. The advantage is a separate USB-A port on the front, which is used to connect larger flash disks, readers and other USB devices.</p> <p>The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. It can handle the permanent connection of several external drives even without an external power supply to the hub. After connecting the external power supply, it is possible to work with five external disks at the same time. </p> <p>Thanks to the Charging hub function, mobile devices can be charged even without connecting to a computer. An unused charger turns this USB hub into a charging hub for free. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc.</p> <p><b>Input:  </b></p> <ul><li>1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector.</li> <li>Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.</li> <li>Connecting USB type A male connector on a fixed 1 m long cable.</li> </ul><p><b>Outputs:</b></p> <ul><li>7x SuperSpeed USB port, USB-A female connectors.</li> <li>Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed).</li> <li>The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s).</li> </ul><p><b>Features:</b></p> <ul><li>Possibility to connect your device while running thanks to the Hot Plug support.</li> <li>Full Plug and Play support.</li> <li>Standby mode support.</li> <li>High quality shielded cable ensures fast communication speed and minimal unwanted interference.</li> <li>Blue LED indicates the connection to the computer's USB port.</li> <li>Dimensions 145 x 42 x 15 mm.</li> <li>Weight 110 g (incl. cable). </li> <li>USB cable length 1 m.</li> </ul><p><b>The hub power mode via USB cable (bus power):</b></p> <ul><li>USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports.</li> <li>In this power mode, the USB hub is also able to work with up to 3 magnetic 2.5" external disks simultaneously.</li> <li>Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port).</li> </ul><p><b>The hub power mode via USB + external USB charger (self power):</b></p> <ul><li>Integrated micro USB connector for additional powering the hub.</li> <li>Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A).</li> <li>In this power mode, the USB hub is able to work with up to 5 magnetic 2.5" external disks. However, for reliable long-term operation of the hub, we recommend connecting a maximum of 3 magnetic external 2.5" drives at the same time.</li> <li>Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 5A at 5V (depending on the capabilities of the external wall charger).</li> </ul><p><b>Independent charging hub mode without connecting to a computer (charging hub):</b></p> <ul><li>After turning off the connected computer or without connecting to the computer, the hub works with power via a USB charger as a separate charging USB hub, just plug a standard charger with a micro USB connector into the hub (micro USB input).</li> <li>Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports, the total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the external power adapter).</li> </ul><p><b>Supported OS:</b></p> <ul><li>MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.</li> <li>Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.</li> </ul><p><b>Package contains:</b></p> <ul><li>SuperSpeed USB hub with fixed 1 m long USB cable,</li> <li>multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,</li> <li>packed in a cardboard box with a hanging hole.</li> </ul>

The slim USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-F7A with a 1 m long USB cable easily and quickly connects up to seven USB devices to the computer at the same time. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5Gb/s. The metal hub body is made of aluminum and provides perfect mechanical protection. Elegant finely structured body surface against fingerprint. Permanently fixed 1 m long USB-A cable is suitable for use with a desktop computer. The advantage is a separate USB-A port on the front, which is used to connect larger flash disks, readers and other USB devices. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. It can handle the permanent connection of several external drives even without an external power supply to the hub. After connecting the external power supply, it is possible to work with five external disks at the same time. Thanks to the Charging hub function, mobile devices can be charged even without connecting to a computer. An unused charger turns this USB hub into a charging hub for free. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 1 m long cable. Outputs: 7x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Blue LED indicates the connection to the computer's USB port. Dimensions 145 x 42 x 15 mm. Weight 110 g (incl. cable). USB cable length 1 m. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 3 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port). The hub power mode via USB + external USB charger (self power): Integrated micro USB connector for additional powering the hub. Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with up to 5 magnetic 2.5" external disks. However, for reliable long-term operation of the hub, we recommend connecting a maximum of 3 magnetic external 2.5" drives at the same time. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 5A at 5V (depending on the capabilities of the external wall charger). Independent charging hub mode without connecting to a computer (charging hub): After turning off the connected computer or without connecting to the computer, the hub works with power via a USB charger as a separate charging USB hub, just plug a standard charger with a micro USB connector into the hub (micro USB input). Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports, the total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the external power adapter). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 1 m long USB cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

<p>Thin USB-C 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-F7C with 30 cm long USB cable fast and easy connects up to seven USB devices to the laptop at the same time. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. </p> <p>The metal hub body is made of aluminum and provides perfect mechanical protection. The elegant finely structured body surface against fingerprint. Fixed 30 cm long USB-C cable is ideal for mobile devices users. The advantage is a separate USB-A port on the front, which is used to connect larger flash disks, readers and other USB devices.</p> <p>The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply, for example, even more external drives can be connected to the computer or the number of mobile phones charged can be increased. It can handle the permanent connection of several external drives even without an external power supply to the hub. After connecting the external power supply, it is possible to work with five external disks at the same time. </p> <p>Thanks to the Charging hub function, mobile devices can be charged even without connecting to a computer. An unused charger turns this USB hub into a charging hub for free. The hub will enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc.</p> <p>The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, reader, keyboard and mouse, to the phone or tablet.</p> <p><b>Input:  </b></p> <ul><li>1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector.</li> <li>Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.</li> <li>Connecting USB type C male connector on a fixed 30 cm long cable.</li> </ul><p><b>Outputs:</b></p> <ul><li>7x SuperSpeed USB port, USB-A female connectors.</li> <li>Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed).</li> <li>The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s).</li> </ul><p><b>Features:</b></p> <ul><li>Possibility to connect your device while running thanks to the Hot Plug support.</li> <li>Full Plug and Play support.</li> <li>Standby mode support.</li> <li>High quality shielded cable ensures fast communication speed and minimal unwanted interference.</li> <li>Blue LED indicates the connection to the computer.</li> <li>Dimensions 145 x 42 x 15 mm.</li> <li>Weight 90 g (incl. cable).</li> <li>USB cable length 30 cm.</li> </ul><p><b>The hub power mode via USB cable (bus power):</b></p> <ul><li>USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports.</li> <li>In this power mode, the USB hub is also able to work with up to 3 magnetic 2.5" external disks simultaneously.</li> <li>Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port).</li> </ul><p><b>The hub power mode via USB + external USB charger (self power):</b></p> <ul><li>Integrated micro USB connector for additional powering the hub.</li> <li>Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A).</li> <li>In this power mode, the USB hub is able to work with up to 5 magnetic 2.5" external disks. However, for reliable long-term operation of the hub, we recommend connecting a maximum of 3 magnetic external 2.5" drives at the same time.</li> <li>Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 5A at 5V (depending on the capabilities of the external wall charger).</li> </ul><p><b>Independent charging hub mode without connecting to a computer (charging hub):</b></p> <ul><li>After turning off the connected computer or without connecting to the computer, the hub works with power via a USB charger as a separate charging USB hub, just plug a standard charger with a micro USB connector into the hub (micro USB input).</li> <li>Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports, the total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the external power adapter).</li> </ul><p><b>Supported OS:</b></p> <ul><li>MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.</li> <li>Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.</li> </ul><p><b>Package contains:</b></p> <ul><li>SuperSpeed USB hub with fixed 30 cm long USB cable,</li> <li>multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,</li> <li>packed in a cardboard box with a hanging hole.</li> </ul>

<p>Round shaped USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-P1AL with 1.2 m long USB cable fast and easy connects up to four USB devices to computer. Three USB ports are located around the perimeter and allow seamless connection of any USB device incl. bulky flash drives or USB readers. The fourth, upper USB port, is ideal for connecting a wireless adapter for better signal reception or for easy insertion of a flash drive with one hand. The rubber pad prevents slipping up on the table. Permanently attached 120 cm long USB cable is suitable for use with a desktop computer.</p> <p>The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So, hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc.</p> <p><b>Input:  </b></p> <ul><li>1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector.</li> <li>Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.</li> <li>Connecting USB type A male connector on a fixed 1.2 m long cable.</li> </ul><p><b>Output:</b></p> <ul><li>4x SuperSpeed USB port, USB-A female connectors.</li> <li>Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed).</li> <li>The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). </li> </ul><p><b>Features:</b></p> <ul><li>Possibility to connect your device while running thanks to the Hot Plug support.</li> <li>Full Plug and Play support.</li> <li>Sleep mode support.</li> <li>The high-quality shielded cable ensures high communication speed and minimal undesirable interference.</li> <li>Blue LED indicates the connection to the computer's USB port.</li> <li>Dimensions 60 x 18 mm.</li> <li>Weight 73 g (incl. cable).</li> <li>USB cable length 1.2 m.</li> </ul><p><b>The hub power mode via USB cable (bus power):</b></p> <p> </p> <ul><li>The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5" external disk) to all four ports.</li> <li>In this power mode, the USB hub is also able to work with up to two magnetic 2.5" external disks simultaneously.</li> <li>Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.5A at 5V (depending on the capabilities of the computer's USB port).</li> </ul><p> </p> <p><b>The hub power mode via USB + external USB charger (self power):</b></p> <p> </p> <ul><li>Integrated micro USB connector for additional powering the hub.</li> <li>Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A). </li> <li>In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets.</li> <li>Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 4.5A at 5V (depending on the capabilities of the external wall charger).</li> </ul><p> </p> <p><b>Supported OS:</b></p> <p> </p> <ul><li>MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.6 and later, Linux with kernel 2.6.14 and later, Android most versions.</li> <li>Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.</li> </ul><p> </p> <p><b>Package contains:</b></p> <p> </p> <ul><li>SuperSpeed USB hub with fixed 1.2 m long USB cable,</li> <li>multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,</li> <li>packed in a cardboard box with a hanging hole.</li> </ul><p> </p>

<p>The seven-port AXAGON HUE-SA7BP ALU CHARGING USB 3.0 hub with own power and fast charging support on all USB ports.</p> <p>A compact hub with a durable aluminum case connects up to seven USB devices to your PC simultaneously.</p> <p>At the same time you can charge mobile phones/tablets/power banks and other devices up to 2A in any hub port thanks to the USB Battery Charging 1.2 support.</p> <p>It can handle permanent connection of several external disks even without the own hub power. With its own power it connects up to four 2.5" magnetic external disks.  </p> <p>The USB ports located across the hub body with sufficient spacing ensure seamless direct connection of large USB devices.</p> <p>A permanently attached USB cable with a sufficient length of 40 cm is ideal for use with laptops.</p> <p>It can also work as a separate charging hub and charge the USB devices from the power adapter even when the PC is turned off or disconnected.</p> <p>The compact power adapter 5V/2A is included.</p> <p><b>Features:</b><br/> 7 downstream USB 3.0 ports with enough space around the connectors.<br/> an upstream USB 3.0 port with USB 3.0 Type A male connector on a 40 cm long permanently attached cable.<br/> Compatible with USB 3.0 and backward compatible with USB 2.0 and USB 1.1.<br/> Supports transmission rates 1.5 / 12 / 480 / 5000 Mb/s (low / full / high / super speed).<br/> Supports USB Battery Charging v 1.2 specification.<br/> Each hub port can be used to charge up to 2A.<br/> Possibility to connect your device while running thanks to the Hot Plug support.<br/> Full Plug and Play support.<br/> LED indication of hub connection to power supply.<br/> Current overload detection and protection.<br/> Hub dimensions 156 x 30 x 21 mm, AC adapter dimensions 29 x 75 x 80 mm, including fork.<br/> Hub weight 88 g (incl. cable), AC adapter weight 100 g (incl. cable).</p> <p><b>The hub power mode via USB cable (bus power):</b><br/> The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5" external disk) to all seven ports.<br/> In this power mode, the USB hub is also able to cope with up to two, or three if connected sequentially, magnetic 2.5" external disks simultaneously.<br/> Charging of mobile devices (except for iPads) is also possible in this power mode, however, the charging current is only 0.9A.</p> <p><b>Own hub power mode via the included power adapter (self power):</b><br/> Own power supply via the included AC/DC adapter (input: 100-240V~, 50/60Hz, 0.45A, output: 5V-2A / 10W, two-pin Euro fork, output coaxial connector diameter 3.5/1.3 mm, cable 150cm).<br/> In this power mode, the USB hub is able to cope with four 2.5" magnetic external disks. However, we recommend that you connect max. three 2.5" magnetic external disks simultaneously for reliable long-term hub operation.<br/> Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current of the external power adapter to max. 2A.</p> <p><b>Independent charging hub mode without being connected to the PC (charging hub):</b><br/> After turning off the connected PC or without being connected to the PC the hub works with power supply via the included AC/DC adapter as a separate charging USB hub.<br/> Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current of the external power adapter to max. 2A.</p> <p><b>OS support:</b><br/> MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 and later (supported are all 32 and 64-bit Windows OS versions), Mac OS X 10.4x and higher, Linux with kernel 2.6.x and above.<br/> Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. </p> <p><b>Package contains:</b><br/> USB 3.0 hub with a permanently connected 40 cm long cable,<br/> power adapter,<br/> printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,<br/> packed in a cardboard box.</p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p>

<p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Connectors:</strong><br /> • 2x USB-C (M) male. </span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Other features:</strong><br /> • DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the connected device.<br /> • USB 480Mbps (USB 2.0), compatible with USB 1.1. <br /> • Supports 480 / 12 / 1.5 Mb/s transmission rates.<br /> • Supported charging technologies: Power Delivery 2.0/3.0/3.1 - 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, PPS, Samsung Adaptive Fast Charging and Super Fast Charging, Huawei Fast Charge Protocol, Apple Fast Charging, SMART Charging and others.<br /> • Support Extended Power Range (EPR) specification up to 240W and Standard Power Range (SPR) specification up to 100W.<br /> • Support for fast charging with a current of up to 5A.<br /> • Integrated E-MARK chip.<br /> • Cable includes power wires 22AWG, data wires 30AWG. <br /> • Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion.<br /> • Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss.<br /> • Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection.<br /> • Suitable for computers, laptops, mobile phones, tablets, power banks, power tools and other devices with USB-C connector.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Other data: </strong><br /> • cable length </span></span>2.5 m<span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">,<br /> • 4.6 mm outer diameter of the cable.</span></span></p>

Premium connection USB-C USB-C Data and Charging AXAGON BUCM2-CM25AB CHARGE cable with USB-C male connectors at both ends. The cable is designed especially for charging and powering computers, monitors, laptops, phones, tablets and other devices. It also supports data transfer speeds of up to 480 Mb/s. The cable has implemented the latest specification of Power Delivery 3.1 charging technology. This technology delivers, among other things, a power output of 240W which is more than double that of Power delivery 3.0, which delivers 100W. You can use not only the (Standard Power Range SPR) for voltages of 5, 9, 15 and 20V with a current of 5A, but also sufficient power in fixed voltages of 28, 36 and 48V with a maximum current of 5A (Extended Power Range - EPR). Thanks to the new PD 3.1 technology, you can also use the cable to power devices with much more power, such as gaming laptops, 4K monitors, power tools or the increasingly popular e-scooters. To identify the cable and its current capabilities, the cable has an integrated E-Mark chip. The cable is also compatible with Quick Charge, PPS, Samsung AFC and SFC, Apple, SMART and other charging technologies. Durable, extended-life bidirectional cable features metal terminals, nickel-plated connectors and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male. Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the connected device. USB 480Mbps (USB 2.0), compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s transmission rates. Supported charging technologies: Power Delivery 2.0/3.0/3.1 - 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, PPS, Samsung Adaptive Fast Charging and Super Fast Charging, Huawei Fast Charge Protocol, Apple Fast Charging, SMART Charging and others. Support Extended Power Range (EPR) specification up to 240W and Standard Power Range (SPR) specification up to 100W. Support for fast charging with a current of up to 5A. Integrated E-MARK chip. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for computers, laptops, mobile phones, tablets, power banks, power tools and other devices with USB-C connector. Other data: cable length 2.5 m, 4.6 mm outer diameter of the cable. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.

Axagon AXG ADSA-DC - Docking- und Kopierstation 2x 2.5"/3.5" SATA USB 3.0 - Digital/Daten. Varunduse meedia tüüp: HDD, SSD, Ketta liides: Jada ATA, Jada ATA II, Jada ATA III, Toetatud ketaste suurused: 2.5,3.5". ...

Axagon ADSA-SN. Varunduse meedia tüüp: HDD, SSD, Ketta liides: Jada ATA, Jada ATA II, Jada ATA III, Toetatud ketaste suurused: 2.5,3.5". Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-A. Maksimaalne andmeedastuskiirus: 5 Gbit/s, ...

Axagon ADSA-ST. Varunduse meedia tüüp: HDD, SSD, Ketta liides: Jada ATA, Jada ATA II, Jada ATA III, Toetatud ketaste suurused: 2.5,3.5". Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-B. Maksimaalne andmeedastuskiirus: 5 Gbit/s, ...

Screwless aluminum external AXAGON EE25-A6C RAW box with USB 3.2 Gen 1 (USB 3.0) interface is designed for 2.5" SATA hard drives or SSDs. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-A cable enables a reliable connection to a computer. SATA 6G interface with UASP support allows you to enjoy the speed of modern SSDs. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the external drive. Hibernation support for connected disk and box. The unique screwless box opening facilitates the box assembly and disassembly. The inner box frame fixes well and protects the inserted disk. Supplied foam pads allow the use of 7 mm HDD and SSD. The aluminum box body helps cool the box and allows easy disk replacement. The elegant, brushed box surface prevents unwanted fingerprints. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB. Speed up to 5 Gbit/s. Connection via reversible USB type C female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without restriction, max. 2.5" disk height 9.5 mm. Other features: Compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transfer in Windows 8 and above. Supports TRIM function to limit the gradual degradation of SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) disk health monitoring system. SSD/HDD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or sleeping the PC. Connection via USB-C 3.2 Gen 1 female connector. USB-C / USB-A cable 40 cm long is included. A decent LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking). External box dimensions 122 x 78 x 13 mm. Weight 80 g. Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB-C 3.2 Gen 1 external box for 2.5" SATA disk, USB-C - USB-A cable 40 cm long, self-adhesive foam pads for 7 mm HDD and SSD, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

<p>Screwless aluminum USB 3.2 Gen 1 - SATA 6G external box for 2.5" SSD/HDD.</p> <ul class="nav nav-pills nav-stacked"> <li>USB 3.2 Gen 1</li> <li>SATA 6G</li> <li>2.5" HDD / SSD</li> <li>screwless mounting</li> <li>UASP</li> </ul> <p>Screwless aluminum external AXAGON EE25-A6C RAW box with USB 3.2 Gen 1 (USB 3.0) interface is designed for 2.5" SATA hard drives or SSDs. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-A cable enables a reliable connection to a computer.</p> <p>SATA 6G interface with UASP support allows you to enjoy the speed of modern SSDs. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the external drive. Hibernation support for connected disk and box. </p> <p>The unique screwless box opening facilitates the box assembly and disassembly. The inner box frame fixes well and protects the inserted disk. Supplied foam pads allow the use of 7 mm HDD and SSD. The aluminum box body helps cool the box and allows easy disk replacement. The elegant, brushed box surface prevents unwanted fingerprints.</p> <p><strong>Input:</strong><br /> USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB.<br /> Speed up to 5 Gbit/s.<br /> Connection via reversible USB type C female connector.</p> <p><strong>Device support:</strong><br /> SATA III - 6 Gb/s (600 MB/s) interface,<br /> Supports 2.5" SSD/HDD,<br /> max. disk capacity - all without restriction,<br /> max. 2.5" disk height 9.5 mm.</p> <p><strong>Other features:</strong><br /> Compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible with USB 2.0.<br /> Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed).<br /> Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s).<br /> Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s).<br /> Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).<br /> The total bandwidth / transmission rate of the box is determined by the USB interface used (theor. 5 Gbit/s).<br /> Supports BOT (Bulk-Only Transport).<br /> Supports UASP (USB Attached SCSI Protocol) for faster data transfer in Windows 8 and above.<br /> Supports TRIM function to limit the gradual degradation of SSD performance over time.<br /> Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) disk health monitoring system.<br /> SSD/HDD boot support in external box.<br /> Possibility to connect your device while running thanks to the Hot Plug support.<br /> Full Plug and Play support.<br /> HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes.<br /> HDD Turn Off - turns off the disk after removing the device or sleeping the PC.<br /> Connection via USB-C 3.2 Gen 1 female connector.<br /> USB-C / USB-A cable 40 cm long is included.<br /> A decent LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking).<br /> External box dimensions 122 x 78 x 13 mm.<br /> Weight 80 g.</p> <p><strong>Supported OS:</strong><br /> MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.<br /> Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.</p> <p><strong>Package contains:</strong><br /> USB-C 3.2 Gen 1 external box for 2.5" SATA disk,<br /> USB-C - USB-A cable 40 cm long,<br /> self-adhesive foam pads for 7 mm HDD and SSD,<br /> multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,<br /> packed in a cardboard box.</p>

Screwless aluminum external AXAGON EE25-A6M RAW box with USB 3.2 Gen 1 (USB 3.0) interface is designed for 2.5" SATA hard drives or SSDs. The USB Micro-B connector on the box together with the supplied USB Micro-B -> USB-A cable enables a reliable connection to a computer. SATA 6G interface with UASP support allows you to enjoy the speed of modern SSDs. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condi-tion of the external drive. Hibernation support for connected disk and box. The unique screwless box opening facilitates the box assembly and disassembly. The inner box frame fixes well and protects the inserted disk. Supplied foam pads allow the use of 7 mm HDD and SSD. The aluminum box body helps cool the box and allows easy disk replacement. The elegant, brushed box surface prevents unwanted fingerprints. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed. Speed up to 5 Gbit/s. Connection via Micro-B USB female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without restriction, max. 2.5" disk height 9.5 mm. Other features: Compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transfer in Windows 8 and above. Supports TRIM function to limit the gradual degradation of SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) disk health monitoring system. SSD/HDD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or sleeping the PC. Connection via Micro-B USB 3.2 Gen 1 female connector. Micro-B USB / USB-A cable 40 cm long is included. A decent LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking). External box dimensions 122 x 78 x 13 mm. Weight 80 g. Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 external box for 2.5" SATA disk, Micro-B USB - USB-A cable 40 cm long, self-adhesive foam pads for 7 mm HDD and SSD, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Ribbed aluminum external AXAGON EE25-GTR RIBBED box with USB 3.2 Gen2 interface for 2.5 SATA HDD or SSD. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-A cable and USB-A -> USB-C adapter enables a reliable connection to a computer. Thanks to the fast USB 3.2 Gen 2 interface with a transfer speed of up to 10 Gb/s, the speed of 2.5" SSD disks is not limited. Compared to conventional boxes with a USB 3.2 Gen 1 interface, the transfer speed of this box with SSD disk is about 20% higher. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the external drive. Hibernation support for connected disk and box. The inner box frame fixes well and protects the inserted disk. The ribbed aluminum box body helps cool and protect the drive. Rubber feet restrict movement on the table. The elegant box surface prevents unwanted fingerprints. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps. Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" SSD/HDD, max. disk capacity - all without restriction, max. 2.5" disk height 9.5 mm. Other features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), backward compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports transmission rates 10 000 / 5 000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the SATA interface used (theor. 6 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or sleeping the PC. Connection via USB 3.2 Gen 2 type C female connector. USB Type C male / USB Type A male cable 60 cm long is included. USB-A - USB-C adapter is included. A decent LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking). Box dimensions 114 x 77 x 16 mm. Weight 100 g. Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and later, Linux with kernel 2.6.x and later. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB-C 3.2 Gen 2 external box for 2.5" SATA disk, USB-C - USB-A cable 60 cm long, USB-A - USB-C adapter, self-adhesive rubber pads, mounting material and screwdriver, multilanguage quick guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Lightweight screwless external box AXAGON EE25-SL SLIDE BOX with USB 3.2 Gen 1 (USB 3.0) and SATA 6G interface is designed for all 2.5" SATA hard drives or SSDs. SATA 6G interface with UASP support allows you to enjoy the speed of modern SSDs. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the external drive. Hibernation support for connected disk and box. The plastic box body allows easy replacement of the disk without the need for screwing. The finely knurled cover surface is scratch-resistant and prevents unwanted fingerprints. The foam padding inside the box fixes and protects the inserted disk. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transmission rates up to 5 Gbit/s. Connection via micro USB type B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" HDD/SSD, max. disk capacity - all without restriction, max. 2.5" disk height 9.5 mm. Other features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0, backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the USB interface used (theor. 5 Gbit/s). Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport). SSD/HDD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or sleeping the PC. Connection via USB 3.2 Gen 1 micro B female connector. Micro USB-B / USB-A cable 52 cm long is included. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking). External box dimensions 130 x 82 x 16 mm. Weight 63 g. Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 external box for 2.5" SATA disk, micro USB-B - USB-A cable 52 cm long, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

<p>Lightweight screwless external box AXAGON EE25-SLC SLIDE BOX with USB 3.2 Gen 1 (USB 3.0) and SATA 6G inter-face is designed for all 2.5" SATA hard drives or SSDs. A double-sided USB-C connector provides a reliable and con-venient connection.</p> <p>SATA 6G interface with UASP support allows you to enjoy the speed of modern SSDs. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condi-tion of the external drive. Hibernation support for connected disk and box.</p> <p>The plastic box body allows easy replacement of the disk without the need for screwing. The finely knurled cover surface is scratch-resistant and prevents unwanted fingerprints. The foam padding inside the box fixes and protects the inserted disk.</p> <p><strong>Input:</strong><br /> USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transmission rates up to 5 Gbit/s.<br /> Connection via reversible USB type C female connector.</p> <p><strong>Device support:</strong><br /> SATA III - 6 Gb/s (600 MB/s) interface,<br /> supports 2.5" HDD/SSD,<br /> max. disk capacity - all without restriction,<br /> max. 2.5" disk height 9.5 mm.</p> <p><strong>Other features:</strong><br /> Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0, backward compatible with USB 2.0.<br /> Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed).<br /> Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s).<br /> Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s).<br /> Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).<br /> The total bandwidth / transmission rate of the box is determined by the USB interface used (theor. 5 Gbit/s).<br /> Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport).<br /> SSD/HDD boot support in external box.<br /> Possibility to connect your device while running thanks to the Hot Plug support.<br /> Full Plug and Play support.<br /> HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes.<br /> HDD Turn Off - turns off the disk after removing the device or sleeping the PC.<br /> Connection via USB-C 3.2 Gen 1 female connector.<br /> USB-C / USB-A cable 32 cm long is included.<br /> A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transfer (blink-ing).<br /> External box dimensions 130 x 82 x 16 mm.<br /> Weight 63 g.</p> <p><strong>Supported OS:</strong><br /> MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.<br />Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.</p> <p><strong>Package contains:</strong><br /> USB-C 3.2 Gen 1 external box for 2.5" SATA disk,<br /> USB-C - USB-A cable 32 cm long,<br /> multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,<br /> packed in a cardboard box with a hanging hole.</p>

Lightweight screwless external box AXAGON EE25-SLC SLIDE BOX with USB 3.2 Gen 1 (USB 3.0) and SATA 6G inter-face is designed for all 2.5" SATA hard drives or SSDs. A double-sided USB-C connector provides a reliable and con-venient connection. SATA 6G interface with UASP support allows you to enjoy the speed of modern SSDs. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condi-tion of the external drive. Hibernation support for connected disk and box. The plastic box body allows easy replacement of the disk without the need for screwing. The finely knurled cover surface is scratch-resistant and prevents unwanted fingerprints. The foam padding inside the box fixes and protects the inserted disk. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transmission rates up to 5 Gbit/s. Connection via reversible USB type C female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" HDD/SSD, max. disk capacity - all without restriction, max. 2.5" disk height 9.5 mm. Other features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0, backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the USB interface used (theor. 5 Gbit/s). Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport). SSD/HDD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or sleeping the PC. Connection via USB-C 3.2 Gen 1 female connector. USB-C / USB-A cable 32 cm long is included. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transfer (blink-ing). External box dimensions 130 x 82 x 16 mm. Weight 63 g. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB-C 3.2 Gen 1 external box for 2.5" SATA disk, USB-C - USB-A cable 32 cm long, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The compact aluminum AXAGON EE25-XA6 external ALINEbox with USB 3.2 Gen 1 (USB 3.0) interface designed for 2.5" SATA hard disks or SSDs. The SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the condition of the external disk. Supports spinning down of connected disks as well as the box. Lightweight yet durable cast aluminum case for perfect mechanical protection of the disk and excellent heat dissipation. The decently shaped case with a brushed surface that provides elegant look and prevents unwanted fingerprints. Easy installation of the hard disk as well as automatic installation can be handled even by a layman and easily create an external disk. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transmission rates up to 5 Gbit/s. Connection via micro USB type B female conector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, Supports 2.5" HDD/SSD. Features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Supports 2.5" SATA III/II/I SSD and HDD of a max. height 9.5 mm without limiting maximum capacity. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s(600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the USB interface used (theor. 5 Gbit/s). Supports UASP (USB Attached SCSI Protocol). SSD/HDD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Connection via micro USB 3.2 B female connector. Micro USB-B / USB-A cable 64 cm cable long is included. Supplying the power via USB 3.2 Gen 1 bus up to 900mA from one USB port is sufficient in all cases. Non-dazzling blue, decent LED indicates the connection to the computer's USB port (permanent light) and the data transmission (blinking). Very simple disk installation - the disk is connected directly into the SATA connector of the motherboard, and inserted into the box body; the front is fastened with two screws using a screwdriver that is included. Other features: Compact dimensions 130 x 78 x 12.5 mm. External box weight 75 g (without USB cable and disk). Supported OSs:MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 external box for 2.5" SATA SSD, micro USB-B - USB-A cable 64 cm long, mounting screws and the screwdriver, a multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.

<p>Screwless aluminum external <strong>AXAGON EE35-A6C RAW box</strong> with USB-C 5Gbps interface is designed <strong>for 3.5" SATA hard drives</strong>. The double-sided <strong>USB-C connector</strong> on the box together with the supplied USB-C -> USB-A cable enables a reliable connection to a computer.</p> <p>The transmission rate is up to 5Gb/s thanks to the fast <strong>USB 3.2 Gen 1</strong> interface. <strong>SATA 6G</strong> interface with <strong>UASP </strong>support allows you to enjoy the speed of modern disks. Reading <strong>S.M.A.R.T.</strong> information monitoring the condition of the external drive. <strong>Hibernation support</strong> for connected disk and box.</p> <p><strong>Screwless box opening</strong> facilitates assembly and disassembly of the 3.5" HDD disk. The inner box frame is designed also to mounting smaller 2.5" HDD/SSD drives while protecting the inserted drive. <strong>Disk replacement</strong> is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration. </p> <p>The <strong>aluminum box body</strong> helps cool and protect the drive. The elegant, <strong>brushed box surface</strong> prevents unwanted fingerprints. The package also includes a <strong>practical stand</strong> for use in the vertical position. This stand not only saves space on your desk, but also provides better air circulation around the box, contributing to longer life and optimal disk performance.</p> <p><strong>Input:</strong><br /> USB 5Gbps (USB 3.1 Gen 1 / USB 3.0), USB-C female connector.<br /> Compatible with USB 2.0, USB 3.2 Gen 2.</p> <p><strong>Device support:</strong><br /> 3.5" HDD drives,<br /> also compatible with 2.5" HDD/SSD drives,<br /> SATA III - 6 Gb/s (600 MB/s) interface.</p> <p><strong>Other features:</strong><br /> Supports transmission rates 5000 / 480 Mbit/s.<br /> Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s).<br /> Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s).<br /> Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).<br /> The total bandwidth / transmission rate of the box is determined by the USB interface used (theor. 5 Gbit/s).<br /> Supports BOT (Bulk-Only Transport).<br /> Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later.<br /> Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition.<br /> SSD boot support in external box.<br /> Possibility to connect your device while running thanks to the Hot Plug support.<br /> Full Plug and Play support.<br /> HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes.<br /> HDD Turn Off - turns off the drive after removing the device or spinning down the PC.<br /> USB-C / USB-A cable 60 cm long is included.<br /> A decent LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking).<br /> Box dimensions 185 x 117 x 33 mm.<br /> Weight 290 g.</p> <p><strong>Power supply:</strong><br /> Power supply via a compact external AC/DC adapter 12V - 2A (24W) with a 150 cm long supply cable.<br /> On/Off button on the box panel.<br /> AC adapter dimensions 79 x 44 x 68 mm (incl. plug).<br /> AC adapter weight 115 g (incl. supply cable).  </p> <p><strong>Supported operating systems:</strong><br /> Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android.<br /> Compatibility depends on the operating system and device manufacturer support.<br /> Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer.</p> <p><strong>Package contains:</strong><br /> USB-C 5Gbps external box for 3.5" SATA disk,<br /> USB-C - USB-A cable 60 cm long,<br /> power adapter 100-240V / 12V-2A,<br /> mounting kit and screwdriver,<br /> box stand,<br /> multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA /BG / CN / ARA,<br /> packed in a cardboard box.</p>

Screwless aluminum external AXAGON EE35-A6C RAW box with USB-C 5Gbps interface is designed for 3.5" SATA hard drives. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-A cable enables a reliable connection to a computer. The transmission rate is up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. SATA 6G interface with UASP support allows you to enjoy the speed of modern disks. Reading S.M.A.R.T. information monitoring the condition of the external drive. Hibernation support for connected disk and box. Screwless box opening facilitates assembly and disassembly of the 3.5" HDD disk. The inner box frame is designed also to mounting smaller 2.5" HDD/SSD drives while protecting the inserted drive. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration. The aluminum box body helps cool and protect the drive. The elegant, brushed box surface prevents unwanted fingerprints. The package also includes a practical stand for use in the vertical position. This stand not only saves space on your desk, but also provides better air circulation around the box, contributing to longer life and optimal disk performance. Input: USB 5Gbps (USB 3.1 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 2.0, USB 3.2 Gen 2. Device support: 3.5" HDD drives, also compatible with 2.5" HDD/SSD drives, SATA III - 6 Gb/s (600 MB/s) interface. Other features: Supports transmission rates 5000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. USB-C / USB-A cable 60 cm long is included. A decent LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking). Box dimensions 185 x 117 x 33 mm. Weight 290 g. Power supply: Power supply via a compact external AC/DC adapter 12V - 2A (24W) with a 150 cm long supply cable. On/Off button on the box panel. AC adapter dimensions 79 x 44 x 68 mm (incl. plug). AC adapter weight 115 g (incl. supply cable). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 5Gbps external box for 3.5" SATA disk, USB-C - USB-A cable 60 cm long, power adapter 100-240V / 12V-2A, mounting kit and screwdriver, box stand, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA /BG / CN / ARA, packed in a cardboard box.

<p>The compact aluminum AXAGON EE25-XA6 external ALINEbox with USB 3.2 Gen 1 (USB 3.0) interface designed for 2.5" SATA hard disks or SSDs.</p> <p>The  SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time.</p> <p>Reading of S.M.A.R.T. information monitoring the condition of the external disk. Supports spinning down of connected disks as well as the box.</p> <p>Lightweight yet durable cast aluminum case for perfect mechanical protection of the disk and excellent heat dissipation.</p> <p>The decently shaped case with a brushed surface that provides elegant look and prevents unwanted fingerprints.</p> <p>Easy installation of the hard disk as well as automatic installation can be handled even by a layman and easily create an external disk.</p> <p><b>Input:</b><br/> USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transmission rates up to 5 Gbit/s.<br/> Connection via micro USB type B female conector.</p> <p><b>Device support:</b><br/> SATA III - 6 Gb/s (600 MB/s) interface,   <br/> Supports 2.5" HDD/SSD.</p> <p><b>Features:</b><br/> Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and backward  compatible with USB 2.0.<br/> Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed).<br/> Supports 2.5" SATA III/II/I SSD and HDD of a max. height 9.5 mm without limiting maximum capacity.<br/> Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s(600 MB/s).<br/> Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s).<br/> Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).<br/> The total bandwidth / transmission rate of the box is determined by the USB interface used (theor. 5 Gbit/s).<br/> Supports UASP (USB Attached SCSI Protocol).<br/> SSD/HDD boot support in external box.<br/> Possibility to connect your device while running thanks to the Hot Plug support.<br/> Full Plug and Play support.<br/> HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes.<br/> HDD Turn Off - turns off the disk after removing the device or spinning down the PC.<br/> Connection via micro USB 3.2 B female connector.<br/> Micro USB-B / USB-A cable 64 cm cable long is included.<br/> Supplying the power via USB 3.2 Gen 1 bus up to 900mA from one USB port is sufficient in all cases.<br/> Non-dazzling blue, decent LED indicates the connection to the computer's USB port (permanent light) and the data transmission (blinking).<br/> Very simple disk installation - the disk is connected directly into the SATA connector of the motherboard, and inserted into the box body; the front is fastened with two screws using a screwdriver that is included.</p> <p><b>Other features:</b><br/> Compact dimensions 130 x 78 x 12.5 mm.<br/> External box weight 75 g (without USB cable and disk).</p> <p><b>Supported OSs:</b><br/>MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.<br/>Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.</p> <p><b>Package contains:</b><br/> USB 3.2 Gen 1 external box for 2.5" SATA SSD,<br/> micro USB-B - USB-A cable 64 cm long,<br/> mounting screws and the screwdriver,<br/> a multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA,<br/> packed in a cardboard box.</p>

Multiport USB-C 3.2 Gen 1 hub AXAGON HMC-5 expands your laptop, computer or phone with four ports and SD / microSD card reader. You can easily and quickly connect up to two USB devices, card reader and HDMI display to your computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a simple and compact 5in1 docking station for notebook like MacBook Pro. The USB hub offers two USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. USB-C connector is dedicated to power up a laptop or mobile phone using Power Delivery 3.0 technology by power up to 100W. Connect the USB-C Power Delivery charger to the hub and connect the hub to the laptop. This saves one USB-C port. The condition is a laptop with Power Delivery charging support from the USB-C port and a suitable PD charger. HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. Popular gaming resolution WQHD 2560 x 1440px at 60Hz or FullHD 1920 x 1080px at 60, 100 and 120Hz max. are also supported. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Card reader supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. High data transfer speed ensured by USB 3.2 Gen 1 interface. The card reader enables simultaneous handling of cards in both slots and direct copying between them. Elegant aluminum body ensures mechanical resistance and quality cooling. The finely structured surface with no fingerprint remains will also please you. Port replicator is an ideal accessory for laptops without USB-A connectors, card reader and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, the connection of the hub is very simple without complicated installation. It is also possible to easily connect and disconnect peripherals while the computer is running. The hub does not afraid of connection to phones with a USB-C connector - for example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 a USB 2.0. Compatible with Thunderbolt 3. Input USB type C male connector on fixed 20 cm cable. USB outputs: 2x SuperSpeed USB port, USB-A female connector. 1x USB type C Power Delivery port (only charging), USB-C female connector. Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit/s). USB-C hub can handle connection of several external drives simultaneously. Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.5A at 5V (depending on the capabilities of the computer's USB port). HDMI output: HDMI. HDMI A (F) female connector. Maximum supported resolution 4K / 4096 x 2160 at 30 Hz. WQHD resolution 2560 x 1440 at 60 Hz max. FullHD resolution 1920 x 1080 at 60, 100, 120 Hz max. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Correct OS is also necessary. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signaling) support. Full HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Up to 8-channel LPCM audio, compressed audio (AC-3, DTC) and HBR audio format support. Sample rate up to 192 kHz and 24bit audio support depends on source and target device i.e. notebook/phone and TV/display/AV receiver. The card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash, SD slot: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2 GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32 GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2 TB). MMC and eMMC 3.x/4.0/4.1/4.2/4.3/4.4/4.5/5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM features). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speed up to 104 MB/s. Supports hardware ECC (Error Correction Code) and CRC (Cyclic Redundancy Check) features. 2 LUN - in file managers, the reader is indicated as two disk drive. Power Delivery: Power Delivery 3.0 support device power supply from the PD wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 100W - 20V/5A. Notebook or phone with Power Delivery charging support from the USB-C port and a suitable PD charger is necessary. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings. White LED indicates computer USB port connection (steady light). High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 110 x 35 x 12.5 mm. Weight 55 g (incl. cable). USB cable length 20 cm. Supported operating systems: Microsoft Windows 10, 11, Mac OS, Linux, Android and Chrome OS. Compatibility depends on used OS and support from device manufacturer. Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed. Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Package contains: USB-C hub with fixed 20 cm long cable, printed installation guide in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.

Multiport USB-C 3.2 Gen 1 hub AXAGON HMC-HCR3A expands your laptop, computer or phone with four ports and SD / microSD card reader. Through the double-sided USB-C connector, you can easily and quickly connect three USB devices, memory cards and an HDMI display to the computer at the same time. The USB-C hub will provide you with a simple and compact 5in1 docking station for notebook. The USB hub offers three USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. Popular gaming resolution WQHD 2560 x 1440px at 60Hz or FullHD 1920 x 1080px at 60, 100 and 120Hz max. are also supported. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Card reader supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. High data transfer speed ensured by USB 3.2 Gen 1 interface. The card reader enables simultaneous handling of cards in both slots and direct copying between them. Elegant aluminum body ensures mechanical resistance and quality cooling. The finely structured surface with no fingerprint remains will also please you. Port replicator is an ideal accessory for laptops without USB-A connectors, card reader and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. You can connect a flash drive, keyboard, mouse, monitor, TV or projector to your phone. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Compatible with Thunderbolt 3. Connecting USB type C male connector on a fixed 20 cm long cable. USB outputs: 3x SuperSpeed USB port, USB-A female connector. Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit/s). USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A in each of the hub's USB ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port). HDMI output: HDMI. HDMI A (F) female connector. Maximum supported resolution 4K / 4096 x 2160 at 30 Hz. WQHD resolution 2560 x 1440 at 60 Hz max. FullHD resolution 1920 x 1080 at 60, 100, 120 Hz max. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Correct OS is also necessary. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Support up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio formats. Support sampling rate up to 192kHz and up to 24-bit audio depends on source and end device, i.e. laptop/phone and TV/monitor/ AV receiver. The card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash, SD slot: Digital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB), MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus (USB bus power). Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings. White LED indicates the connection to the computer's USB port. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions 110 x 35 x 12.5 mm. Weight 58 g (incl. cable). USB cable length 20 cm. Supported operating systems: Microsoft Windows 10, 11, Mac OS, Linux, Android and Chrome OS. Compatibility depends on used OS and support from device manufacturer. Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed. Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Package contains: USB-C hub with fixed 20 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.

<p>Multiport USB-C 3.2 Gen 1 hub AXAGON HMC-5 expands your laptop, computer or phone with four ports and SD / microSD card reader. You can easily and quickly connect up to two USB devices, card reader and HDMI display to your computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a simple and compact 5in1 docking station for notebook like MacBook Pro.</p> <p>The USB hub offers two USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc.</p> <p>USB-C connector is dedicated to power up a laptop or mobile phone using Power Delivery 3.0 technology by power up to 100W. Connect the USB-C Power Delivery charger to the hub and connect the hub to the laptop. This saves one USB-C port. The condition is a laptop with Power Delivery charging support from the USB-C port and a suitable PD charger.</p> <p>HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. Popular gaming resolution WQHD 2560 x 1440px at 60Hz or FullHD 1920 x 1080px at 60, 100 and 120Hz max. are also supported. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output.</p> <p>Card reader supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. High data transfer speed ensured by USB 3.2 Gen 1 interface. The card reader enables simultaneous handling of cards in both slots and direct copying between them. </p> <p>Elegant aluminum body ensures mechanical resistance and quality cooling. The finely structured surface with no fingerprint remains will also please you. </p> <p>Port replicator is an ideal accessory for laptops without USB-A connectors, card reader and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, the connection of the hub is very simple without complicated installation. It is also possible to easily connect and disconnect peripherals while the computer is running. The hub does not afraid of connection to phones with a USB-C connector - for example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone.</p> <p><b>Input:</b><br/> 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector.<br/> Backward compatible with USB 3.1 Gen 1 / USB 3.0 a USB 2.0.<br/> Compatible with Thunderbolt 3.<br/> Input USB type C male connector on fixed 20 cm cable. </p> <p><b>USB outputs:</b><br/> 2x SuperSpeed USB port, USB-A female connector.<br/> 1x USB type C Power Delivery port (only charging), USB-C female connector.<br/> Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed).<br/> The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit/s).<br/> USB-C hub can handle connection of several external drives simultaneously.<br/> Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.5A at 5V (depending on the capabilities of the computer's USB port).</p> <p><b>HDMI output:</b><br/> HDMI.<br/> HDMI A (F) female connector.<br/> Maximum supported resolution 4K / 4096 x 2160 at 30 Hz. <br/> WQHD resolution 2560 x 1440 at 60 Hz max.<br/> FullHD resolution 1920 x 1080 at 60, 100, 120 Hz max.<br/> DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Correct OS is also necessary. The video output function will not be available without these requirements. <br/> HPD (Hot-Plug-Detect) support.<br/> TMDS (Transition Minimized Differential Signaling) support.<br/> Full HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. <br/> Up to 8-channel LPCM audio, compressed audio (AC-3, DTC) and HBR audio format support.<br/> Sample rate up to 192 kHz and 24bit audio support depends on source and target device i.e. notebook/phone and TV/display/AV receiver.</p> <p><b>The card reader - two slots:</b><br/> Micro SD slot: microSD / microSDHC / microSDXC / TransFlash, <br/> SD slot: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / microSDHC / microSDXC, MMC Micro.</p> <p><b>The reader supports the following flash card specifications:</b><br/> SD 1.0/1.1 (SD - Secure Digital, up to 2 GB).<br/> SD 2.0 (SDHC - Secure Digital High Capacity, up to 32 GB).<br/> SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2 TB).<br/> MMC and eMMC 3.x/4.0/4.1/4.2/4.3/4.4/4.5/5.0 (8-bit). <br/> Supports SD 3.01 and SD Jukebox applications (CPRM features).<br/> Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speed up to 104 MB/s.<br/> Supports hardware ECC (Error Correction Code) and CRC (Cyclic Redundancy Check) features. <br/> 2 LUN - in file managers, the reader is indicated as two disk drive.</p> <p><b>Power Delivery:</b><br/> Power Delivery 3.0 support device power supply from the PD wall charger via USB-C hub. <br/> Maximum power supply power via PD USB-C hub output 100W - 20V/5A.<br/> Notebook or phone with Power Delivery charging support from the USB-C port and a suitable PD charger is necessary.</p> <p><b>Other features:</b><br/> Possibility to connect your device while running thanks to the Hot Plug support.<br/> Full Plug and Play support.<br/> Standby mode support.<br/> Power via USB bus - USB bus power or from PD wall charger. <br/> Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings.<br/> White LED indicates computer USB port connection (steady light).<br/> High quality shielded cable ensures fast communication speed and minimal unwanted interference.<br/> Dimensions 110 x 35 x 12.5 mm.<br/> Weight 55 g (incl. cable). <br/> USB cable length 20 cm.</p> <p><b>Supported operating systems:</b><br/> Microsoft Windows 10, 11, Mac OS, Linux, Android and Chrome OS. <br/>Compatibility depends on used OS and support from device manufacturer. <br/> Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed.<br/> Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer.</p> <p><b>Package contains: </b><br/> USB-C hub with fixed 20 cm long cable, <br/> printed installation guide in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, <br/> packed in a cardboard box with a hanging hole.</p>

<p>Metal USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-MSA connects up to four USB devices to laptop or computer. It also offers USB port shutdown and Charging hub feature.</p> <p>The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices.</p> <p>Each USB port can be turned off / on using the button. This makes it easy to disconnect unnecessary devices without having to disconnect them from the USB hub. Each USB-A port has a blue LED indicating port is turned on or off. After connecting the hub, all LEDs are on = ports are enabled, LED is off = port is disabled.</p> <p>The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks can be connected to a computer, laptop, tablet or smartphone. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5Gb/s.</p> <p>Thanks to the Charging hub function, mobile devices can be charged even without a connection to a computer. An unused charger will turn this USB hub into a charging hub for free. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc.</p> <p>The USB hub is the ideal accessory for ultrabooks with a small number of USB-A ports. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet.</p> <p><b>Input: </b> <br/> 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector.    <br/> Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.<br/> Connecting USB type A male connector on a fixed 20 cm long cable.</p> <p><b>Output:</b><br/> 4x SuperSpeed USB port, USB-A female connectors.<br/> 4x Off/On button with LED indication.<br/> Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed).<br/> The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s).</p> <p><b>Features:</b><br/> Possibility to connect your device while running thanks to the Hot Plug support.<br/> Full Plug and Play support.<br/> Sleep mode support.<br/> The high quality shielded cable ensures high communication speed and minimal undesirable interference.<br/> Dimensions 102 x 31 x 10 mm.<br/> Weight 39 g (incl. cable).<br/> USB cable length 20 cm.</p> <p><b>The hub power mode via USB cable (bus power):</b><br/> The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5" external disk) to all four ports.<br/> In this power mode, the USB hub is also able to work with up to two magnetic 2.5" external disks simultaneously.<br/> Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2A at 5V (depending on the capabilities of the computer's USB port).</p> <p><b>The hub power mode via USB + external USB charger (self power):</b><br/> Integrated micro USB connector for additional powering the hub.<br/> Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A).<br/> In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets.<br/> Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.6A at 5V (depending on the capabilities of the external wall charger).</p> <p><b>Independent charging hub mode without connection to the PC (charging hub):</b><br/> After power off the connected PC or without connection to the PC the hub works with power supply via USB wall charger as a separate charging USB hub. Just plug a standard wall charger with a micro USB connector into the hub (micro USB input).<br/> Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the external wall charger).</p> <p><b>Supported OS:</b><br/> MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.<br/> Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.</p> <p><b>Package contains:</b><br/> SuperSpeed USB hub with fixed 20 cm long USB cable,<br/> printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,<br/> packed in a cardboard box with a hanging hole.</p>

<div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">The round USB-C 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-P1C easily and quickly connects up to four USB devices to a laptop or computer at the same time. Three USB ports are located around the perimeter and allow seamless connection of any USB device incl. bulky flash drives or USB readers. The fourth, upper USB port, is ideal for connecting a wireless adapter for better signal reception or for easy insertion of a flash drive with one hand. The rubber pad prevent slipping up on the table. Fixed 30 cm long USB cable is ideal for mobile devices users.</span></span></div> <div> </div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">This compackt hub can also handle the permanent connection of several external drives. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Apple iPhone, iPad etc. </span></span></div> <div> </div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. </span></span></div> <div> </div> <div><strong><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">Input:  </span></span></strong></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. </span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Connecting USB type C male connector on a fixed 30 cm long cable.</span></span></div> <div> </div> <div><strong><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">Outputs:</span></span></strong></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• 4x SuperSpeed USB port, USB-A female connectors.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed).</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s).</span></span></div> <div> </div> <div><strong><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">Features:</span></span></strong></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Possibility to connect your device while running thanks to the Hot Plug support.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Full Plug and Play support.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Standby mode support.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• High quality shielded cable ensures fast communication speed and minimal unwanted interference.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Blue LED indicates the connection to the computer's USB port.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Dimensions Ø 60 x 18 mm.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Weight 43 g (incl. cable).</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• USB cable length 30 cm.</span></span></div> <div> </div> <div><strong><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">The hub power mode via USB cable (bus power): </span></span></strong></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. </span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• In this power mode, the USB hub is also able to work with up to two magnetic 2.5" external disks simultaneously. </span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.5A at 5V (depending on the capabilities of the computer's USB port).</span></span></div> <div> </div> <div><strong><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">The hub power mode via USB + external USB charger (self power): </span></span></strong></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Integrated micro USB connector for additional powering the hub.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A). </span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports, the total charging current (which is divided into ports) reaches up to 4.5A at 5V (depending on the capabilities of the external power adapter).</span></span></div> <div> </div> <div><strong><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">Supported OS:</span></span></strong></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.</span></span></div> <div><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">• Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.</span></span></div> <div> </div>

Travel USB-A 5Gbps hub AXAGON HUE-C1A fast and easy connects up to four USB devices to laptop or computer at the same time. Fixed 19 cm long USB-A cable is ideal for mobile devices users. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The versatility of this compact USB hub is also enhanced by the built-in USB-C connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply you can connect even more external drives to your computer or increase the number of charged mobile phones. Even without an external power supply, the hub can handle the permanent connection of several external drives. The hub also enables charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0) and USB 1.1. Connecting USB type A male connector on a fixed 19 cm long cable. Outputs: 4x USB 5Gbps, USB-A female connector. Supported transmission rates 5.000 / 480 / 12 / 1.5 Mbps. The total bandwidth / transfer rate of the box is given by the used USB 5Gbps interface (theor. up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Decently bright LED indicates the connection of the hub to the computer. Dimensions 106 x 32 x 11 mm. Weight 37 g (incl. cable). USB cable length 19 cm. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 2 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1A in each of the hub ports. The hub power mode via USB + external USB charger (self power): Integrated USB-C connector in the body of the hub for additional power supply of the hub. Any mobile device wall charger (not included) with USB-C connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and later, Android most versions. Package contains: USB-A hub with fixed 19 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

<p>Travel USB-C 5Gbps hub AXAGON HUE-C1C fast and easy connects up to four USB devices to laptop or computer at the same time. Fixed 19 cm long USB-C cable is ideal for mobile devices users. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s.</p> <p>The versatility of this compact USB hub is also enhanced by the built-in USB-C connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. Even without an external power supply, the hub can handle the permanent connection of several external drives.</p> <p>The hub also enables charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc.</p> <p>The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet.</p> <p><strong>Input:  </strong><br /> USB 5Gbps (USB 3.2 Gen1 / USB 3.0).<br /> Backward compatible with USB 480Mbps (USB 2.0) and USB 1.1.    <br /> Connecting USB type C male connector on a fixed 19cm long cable.</p> <p><strong>Outputs:</strong><br /> 4x USB 5Gbps, USB-A female connector.<br /> Supported transmission rates 5.000 / 480 / 12 / 1.5 Mbps.<br /> The total bandwidth / transfer rate of the box is given by the used USB 5Gbps interface (theor. up to 5 Gbit/s).</p> <p><strong>Features:</strong><br /> Possibility to connect your device while running thanks to the Hot Plug support.<br /> Full Plug and Play support.<br /> Standby mode support.<br /> High quality shielded cable ensures fast communication speed and minimal unwanted interference.<br /> Decently bright LED indicates the connection of the hub to the computer.<br /> Dimensions 106 x 32 x 11 mm.<br /> Weight 37 g (incl. cable).<br /> USB cable length 19 cm.</p> <p><strong>The hub power mode via USB cable (bus power):</strong><br /> USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports.<br /> In this power mode, the USB hub is also able to work with up to 2 magnetic 2.5" external disks simultaneously.<br /> Charge mobile devices (including iPad) with current up to 1A in each of the hub ports.</p> <p><strong>The hub power mode via USB + external USB charger (self power):</strong><br /> Integrated USB-C connector in the body of the hub for additional power supply of the hub.<br /> Any mobile device wall charger (not included) with USB-C connector can be used (recommended output current of the charger min. 2A).<br /> In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets.<br /> Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports.</p> <p><strong>Supported OS:</strong><br /> Windows 8.1 / 10 / 11 and later,<br /> Windows Server 2012 R2 / 2016 / 2019 / 2022 and later,<br /> Mac OS X 10.x and higher,<br /> Linux with kernel 2.6.x and later,<br /> Android most versions.</p> <p><strong>Package contains:</strong><br /> USB-C hub with fixed 19 cm long cable,<br /> multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,<br /> packed in a cardboard box with a hanging hole.</p>

Travel USB-C 5Gbps hub AXAGON HUE-C1C fast and easy connects up to four USB devices to laptop or computer at the same time. Fixed 19 cm long USB-C cable is ideal for mobile devices users. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The versatility of this compact USB hub is also enhanced by the built-in USB-C connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. Even without an external power supply, the hub can handle the permanent connection of several external drives. The hub also enables charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: USB 5Gbps (USB 3.2 Gen1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0) and USB 1.1. Connecting USB type C male connector on a fixed 19cm long cable. Outputs: 4x USB 5Gbps, USB-A female connector. Supported transmission rates 5.000 / 480 / 12 / 1.5 Mbps. The total bandwidth / transfer rate of the box is given by the used USB 5Gbps interface (theor. up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Decently bright LED indicates the connection of the hub to the computer. Dimensions 106 x 32 x 11 mm. Weight 37 g (incl. cable). USB cable length 19 cm. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 2 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1A in each of the hub ports. The hub power mode via USB + external USB charger (self power): Integrated USB-C connector in the body of the hub for additional power supply of the hub. Any mobile device wall charger (not included) with USB-C connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and later, Android most versions. Package contains: USB-C hub with fixed 19 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Thin USB-C 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-F7C with 30 cm long USB cable fast and easy connects up to seven USB devices to the laptop at the same time. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The metal hub body is made of aluminum and provides perfect mechanical protection. The elegant finely structured body surface against fingerprint. Fixed 30 cm long USB-C cable is ideal for mobile devices users. The advantage is a separate USB-A port on the front, which is used to connect larger flash disks, readers and other USB devices. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply, for example, even more external drives can be connected to the computer or the number of mobile phones charged can be increased. It can handle the permanent connection of several external drives even without an external power supply to the hub. After connecting the external power supply, it is possible to work with five external disks at the same time. Thanks to the Charging hub function, mobile devices can be charged even without connecting to a computer. An unused charger turns this USB hub into a charging hub for free. The hub will enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, reader, keyboard and mouse, to the phone or tablet. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type C male connector on a fixed 30 cm long cable. Outputs: 7x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Blue LED indicates the connection to the computer. Dimensions 145 x 42 x 15 mm. Weight 90 g (incl. cable). USB cable length 30 cm. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 3 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port). The hub power mode via USB + external USB charger (self power): Integrated micro USB connector for additional powering the hub. Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with up to 5 magnetic 2.5" external disks. However, for reliable long-term operation of the hub, we recommend connecting a maximum of 3 magnetic external 2.5" drives at the same time. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 5A at 5V (depending on the capabilities of the external wall charger). Independent charging hub mode without connecting to a computer (charging hub): After turning off the connected computer or without connecting to the computer, the hub works with power via a USB charger as a separate charging USB hub, just plug a standard charger with a micro USB connector into the hub (micro USB input). Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports, the total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the external power adapter). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 30 cm long USB cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Metal USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-MSA connects up to four USB devices to laptop or computer. It also offers USB port shutdown and Charging hub feature. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. Each USB port can be turned off / on using the button. This makes it easy to disconnect unnecessary devices without having to disconnect them from the USB hub. Each USB-A port has a blue LED indicating port is turned on or off. After connecting the hub, all LEDs are on = ports are enabled, LED is off = port is disabled. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks can be connected to a computer, laptop, tablet or smartphone. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5Gb/s. Thanks to the Charging hub function, mobile devices can be charged even without a connection to a computer. An unused charger will turn this USB hub into a charging hub for free. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. The USB hub is the ideal accessory for ultrabooks with a small number of USB-A ports. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 20 cm long cable. Output: 4x SuperSpeed USB port, USB-A female connectors. 4x Off/On button with LED indication. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions 102 x 31 x 10 mm. Weight 39 g (incl. cable). USB cable length 20 cm. The hub power mode via USB cable (bus power): The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5" external disk) to all four ports. In this power mode, the USB hub is also able to work with up to two magnetic 2.5" external disks simultaneously. Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2A at 5V (depending on the capabilities of the computer's USB port). The hub power mode via USB + external USB charger (self power): Integrated micro USB connector for additional powering the hub. Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets. Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.6A at 5V (depending on the capabilities of the external wall charger). Independent charging hub mode without connection to the PC (charging hub): After power off the connected PC or without connection to the PC the hub works with power supply via USB wall charger as a separate charging USB hub. Just plug a standard wall charger with a micro USB connector into the hub (micro USB input). Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the external wall charger). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Round shaped USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-P1AL with 1.2 m long USB cable fast and easy connects up to four USB devices to computer. Three USB ports are located around the perimeter and allow seamless connection of any USB device incl. bulky flash drives or USB readers. The fourth, upper USB port, is ideal for connecting a wireless adapter for better signal reception or for easy insertion of a flash drive with one hand. The rubber pad prevents slipping up on the table. Permanently attached 120 cm long USB cable is suitable for use with a desktop computer. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So, hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 1.2 m long cable. Output: 4x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high-quality shielded cable ensures high communication speed and minimal undesirable interference. Blue LED indicates the connection to the computer's USB port. Dimensions 60 x 18 mm. Weight 73 g (incl. cable). USB cable length 1.2 m. The hub power mode via USB cable (bus power): The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5" external disk) to all four ports. In this power mode, the USB hub is also able to work with up to two magnetic 2.5" external disks simultaneously. Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.5A at 5V (depending on the capabilities of the computer's USB port). The hub power mode via USB + external USB charger (self power): Integrated micro USB connector for additional powering the hub. Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets. Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 4.5A at 5V (depending on the capabilities of the external wall charger). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.6 and later, Linux with kernel 2.6.14 and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 1.2 m long USB cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The four port AXAGON HUE-S2B USB 3.0 hub with optional external power and fast charging support on all ports. A lightweight small hub with elegant, matte plastic body connects quickly and easily up to four USB devices to your PC at one time. A great advantage is the possibility of external power supply from any mobile device charger with a micro USB connector. The unused charger thus makes this USB hub a fast-charging hub for free. Mobile phones, tablets, power banks and other devices can be charged up to 2A (depends on the charger used) in any hub port thanks to the USB Battery Charging 1.2 support. Supports charging of iPad tablets even without auxiliary power supply with approx. 1A (iPad mostly cannot be charged directly from the USB 3.0 ports on the PC). It can even handle permanent connection of several external disks without external hub power. When external power supply is connected, you can even work with three external disks at one time. The USB ports located across the hub body with sufficient spacing ensure seamless direct connection of large USB devices. A permanently attached USB cable with a sufficient length of 30 cm is ideal for use with laptops. It can also work as a separate charging hub and charge the USB devices from the power adapter even when the PC is turned off or disconnected. Features: 4 downstream USB 3.0 ports with enough space around the connectors. an upstream USB 3.0 port with USB Type A male connector on a 30 cm long permanently attached cable. Compatible with USB 3.0 and backward compatible with USB 2.0 and USB 1.1. Supports transmission rates 1.5 / 12 / 480 / 5000 Mb/s (low / full / high / super speed). Supports USB Battery Charging v 1.2 specification. Each hub port can be used to charge up to 2 A (with an external USB charger - not included). Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. LED indication of hub connection to power supply. Current overload detection and protection. Hub dimensions 96 x 32 x 22 mm. Hub weight 48 g (incl. cable). The hub power mode via USB cable (bus power): The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5" external disk) to all four ports. In this power mode, the USB hub is also able to cope with up to two magnetic 2.5" external disks simultaneously. Charging of mobile devices (including iPads) is also possible in this power mode, however, the charging current is only 0.9 A, in some cases 1 A (depending on the computer). The hub power mode via USB charger - not included (self power): Any mobile device charger with micro USB connector (recommended output current of the charger 2A) can be used. In this power mode, the USB hub is able to cope with three magnetic 2.5" external disks. However, we recommend that you connect max. two external 2.5" disks simultaneously for reliable long-term hub operation. Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current of the external power adapter. Independent charging hub mode without being connected to the PC (charging hub): After disconnecting the connected PC or without being connected to the PC the hub works with power supply via USB charger as a separate charging USB hub. Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current of the external power adapter. OS support: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.0 hub with permanently connected 30 cm long cable, printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

<p>The four port AXAGON HUE-S2BL USB 3.0 hub with a 1.2 m long USB cable, optional external power and fast charging support on all ports.</p> <p>A lightweight small hub with elegant, matte plastic body connects quickly and easily up to four USB devices to your PC at one time.</p> <p>The permanently attached 1.2 m long USB cable is suitable for use with a desktop computer.</p> <p>A great advantage is the possibility of external power supply from any mobile device charger with a micro USB connector. Any idle charger thus makes this USB hub a fast-charging hub for free.</p> <p>Mobile phones, tablets, power banks and other devices can be charged up to 2A (depends on the charger used) in any hub port thanks to the USB Battery Charging 1.2 support.</p> <p>Supports charging of iPad tablets even without auxiliary power supply with approx. 1A (iPad mostly cannot be charged directly from the USB 3.0 ports on the PC).</p> <p>It can even handle permanent connection of several external disks without external hub power. When external power supply is connected, you can even work with three external disks at one time.</p> <p>It can also work as a separate charging hub and charge the USB devices from the power adapter even when the PC is turned off or disconnected.</p> <p>The USB ports located across the hub body with sufficient spacing ensure seamless direct connection of large USB devices.</p> <p><strong>Features:</strong><br /> 4 downstream USB 3.0 ports with enough space around the connectors.<br /> an upstream USB 3.0 port with USB 3.0 Type A male connector on a 120 cm long permanently attached cable.<br /> Compatible with USB 3.0 and backward compatible with USB 2.0 and USB 1.1.<br /> Supports transmission rates 1.5 / 12 / 480 / 5000 Mb/s (low / full / high / super speed).<br /> Supports USB Battery Charging v 1.2 specification.<br /> Each hub port can be used to charge up to 2A (with an external USB charger - not included).<br /> Possibility to connect your device while running thanks to the Hot Plug support.<br /> Full Plug and Play support.<br /> LED indication of hub connection to power supply.<br /> Current overload detection and protection.<br /> Hub dimensions 96 x 32 x 22 mm.<br /> Hub weight 76 g (incl. cable).</p> <p><strong>The hub power mode via USB cable (bus power):</strong><br /> The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5" external disk) to all four ports.<br /> In this power mode, the USB hub is also able to cope with up to two magnetic 2.5" external disks simultaneously.<br /> Charging of mobile devices (including iPads) is also possible in this power mode, however, the charging current is only 0.9 A, in some cases 1 A (depending on the computer).</p> <p><strong>The hub power mode via USB charger - not included (self power):</strong><br /> Any mobile device charger with micro USB connector (recommended output current of the charger 2A) can be used.<br /> In this power mode, the USB hub is able to cope with three magnetic 2.5" external disks. However, we recommend that you connect max. two external 2.5" disks simultaneously for reliable long-term hub operation.<br /> Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current of the external power adapter.</p> <p><strong>Independent charging hub mode without being connected to the PC (charging hub):</strong><br /> After disconnecting the connected PC or without being connected to the PC the hub works with power supply via USB charger as a separate charging USB hub.<br /> Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current of the external power adapter.</p> <p><strong>OS support:</strong><br /> MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 and later (supported are all 32 and 64-bit Windows OS versions), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and above.<br /> Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. </p> <p><strong>Package contains:</strong><br /> USB 3.0 hub with a permanently connected 120 cm long cable,<br /> printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA,<br /> packed in a cardboard box.</p>

The four port AXAGON HUE-S2BL USB 3.0 hub with a 1.2 m long USB cable, optional external power and fast charging support on all ports. A lightweight small hub with elegant, matte plastic body connects quickly and easily up to four USB devices to your PC at one time. The permanently attached 1.2 m long USB cable is suitable for use with a desktop computer. A great advantage is the possibility of external power supply from any mobile device charger with a micro USB connector. Any idle charger thus makes this USB hub a fast-charging hub for free. Mobile phones, tablets, power banks and other devices can be charged up to 2A (depends on the charger used) in any hub port thanks to the USB Battery Charging 1.2 support. Supports charging of iPad tablets even without auxiliary power supply with approx. 1A (iPad mostly cannot be charged directly from the USB 3.0 ports on the PC). It can even handle permanent connection of several external disks without external hub power. When external power supply is connected, you can even work with three external disks at one time. It can also work as a separate charging hub and charge the USB devices from the power adapter even when the PC is turned off or disconnected. The USB ports located across the hub body with sufficient spacing ensure seamless direct connection of large USB devices. Features: 4 downstream USB 3.0 ports with enough space around the connectors. an upstream USB 3.0 port with USB 3.0 Type A male connector on a 120 cm long permanently attached cable. Compatible with USB 3.0 and backward compatible with USB 2.0 and USB 1.1. Supports transmission rates 1.5 / 12 / 480 / 5000 Mb/s (low / full / high / super speed). Supports USB Battery Charging v 1.2 specification. Each hub port can be used to charge up to 2A (with an external USB charger - not included). Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. LED indication of hub connection to power supply. Current overload detection and protection. Hub dimensions 96 x 32 x 22 mm. Hub weight 76 g (incl. cable). The hub power mode via USB cable (bus power): The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5" external disk) to all four ports. In this power mode, the USB hub is also able to cope with up to two magnetic 2.5" external disks simultaneously. Charging of mobile devices (including iPads) is also possible in this power mode, however, the charging current is only 0.9 A, in some cases 1 A (depending on the computer). The hub power mode via USB charger - not included (self power): Any mobile device charger with micro USB connector (recommended output current of the charger 2A) can be used. In this power mode, the USB hub is able to cope with three magnetic 2.5" external disks. However, we recommend that you connect max. two external 2.5" disks simultaneously for reliable long-term hub operation. Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current of the external power adapter. Independent charging hub mode without being connected to the PC (charging hub): After disconnecting the connected PC or without being connected to the PC the hub works with power supply via USB charger as a separate charging USB hub. Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current of the external power adapter. OS support: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 and later (supported are all 32 and 64-bit Windows OS versions), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.0 hub with a permanently connected 120 cm long cable, printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.

The four port AXAGON HUE-S2BP USB 3.0 hub with a 1.2 m long USB cable, power adapter and fast charging support on all ports. A lightweight small hub with elegant, matte plastic body connects quickly and easily up to four USB devices to your PC at one time. The permanently attached 1.2 m long USB cable is suitable for use with a desktop computer. Included in the package is a power supply/charger with USB type-A 5V/2A output and 1.5 m micro USB cable. The advantage of this solution is the possibility to use the supplied charger and cable universally, for example to charge the mobile phone or tablet directly. Mobile phones, tablets, power banks and other devices can be charged up to 2A (depends on the charger used) in any hub port thanks to the USB Battery Charging 1.2 support. It can even handle permanent connection of several external disks without external hub power. When power adapter is connected, you can even work with three external disks at one time. The USB ports located across the hub body with sufficient spacing ensure seamless direct connection of large USB devices. It can also work as a separate charging hub and charge the USB devices from the power adapter even when the PC is turned off or disconnected. Features: 4 downstream USB 3.0 ports with enough space around the connectors. an upstream USB 3.0 port with USB 3.0 Type A male connector on a 120 cm long permanently attached cable. Compatible with USB 3.0 and backward compatible with USB 2.0 and USB 1.1. Supports transmission rates 1.5 / 12 / 480 / 5000 Mb/s (low / full / high / super speed). Supports USB Battery Charging v 1.2 specification. Included in the package is power supply with USB type-A 5V/2A output and 1.5 m micro USB charging & data cable. Each hub port can be used to charge up to 2A (with an external USB charger connected). The iPad charging support up to 2A (with an external USB charger) or up to 1A (without external power supply). Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. LED indication of hub connection to power supply. Current overload detection and protection. Hub dimensions 96 x 32 x 22 mm, USB charger dimensions 22 x 36 x 76 mm including the fork. Hub weight 76 g (incl. cable), USB charger weight 36 g ((without USB cable). The hub power mode via USB cable (bus power): The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5" external disk) to all four ports. In this power mode, the USB hub is also able to cope with up to two magnetic 2.5" external disks simultaneously. Charging of mobile devices (including iPads) is also possible in this power mode, however, the charging current is only 0.9 A, in some cases 1A (depending on the computer). The hub power mode via the included USB charger (self power): In this power mode, the USB hub is able to cope with three magnetic 2.5" external disks. However, we recommend that you connect max. two external 2.5" disks simultaneously for reliable long-term hub operation. Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current 2A of the external power adapter. Independent charging hub mode without being connected to the PC (charging hub): After disconnecting the connected PC or without being connected to the PC the hub works with power supply via USB charger as a separate charging USB hub. Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current 2A of the external power adapter. OS support: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 and later (supported are all 32 and 64-bit Windows OS versions), Mac OS X 10.4x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.0 hub with a permanently connected 120 cm long cable, universal power adapter / charger with USB 5V/2A output, universal charging and data cable USB type A male / micro USB male, 150 cm long, printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

The four port AXAGON HUE-S2C USB 3.1 hub with optional external power and fast charging support on all ports. A lightweight small hub with elegant, matte plastic body connects quickly and easily up to four USB devices to your PC at one time. A great advantage is the possibility of external power supply from any mobile device charger with a micro USB connector. The unused charger thus makes this USB hub a fast-charging hub for free. Mobile phones, tablets, power banks and other devices can be charged up to 2A (depends on the charger used) in any hub port thanks to the USB Battery Charging 1.2 support. Supports charging of iPad tablets even without auxiliary power supply with approx. 1A (iPad mostly cannot be charged directly from the USB 3.0 ports on the PC). It can even handle permanent connection of several external disks without external hub power. When external power supply is connected, you can even work with three external disks at one time. The USB ports located across the hub body with sufficient spacing ensure seamless direct connection of large USB devices. A permanently attached USB cable with a sufficient length of 40 cm is ideal for use with laptops. It can also work as a separate charging hub and charge the USB devices from the power adapter even when the PC is turned off or disconnected. Features: 4 downstream USB 3.0 ports with enough space around the connectors. an upstream USB 3.1 Gen port with USB Type C male connector on a 40 cm long permanently attached cable. Compatible with USB 3.0 and backward compatible with USB 2.0 and USB 1.1. Supports transmission rates 1.5 / 12 / 480 / 5000 Mb/s (low / full / high / super speed). Supports USB Battery Charging v 1.2 specification. Each hub port can be used to charge up to 2A (with an external USB charger - not included). Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. LED indication of hub connection to power supply. Current overload detection and protection. Hub dimensions 96 x 32 x 22 mm. Hub weight 49 g (incl. cable). The hub power mode via USB cable (bus power): The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5" external disk) to all four ports. In this power mode, the USB hub is also able to cope with up to two magnetic 2.5" external disks simultaneously. Charging of mobile devices (including iPads) is also possible in this power mode, however, the charging current is only 0.9A, in some cases 1A (depending on the computer). The hub power mode via USB charger - not included (self power): Any mobile device charger with micro USB connector (recommended output current of the charger 2A) can be used. In this power mode, the USB hub is able to cope with three magnetic 2.5" external disks. However, we recommend that you connect max. two external 2.5" disks simultaneously for reliable long-term hub operation. Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current of the external power adapter. Independent charging hub mode without being connected to the PC (charging hub): After disconnecting the connected PC or without being connected to the PC the hub works with power supply via USB charger as a separate charging USB hub. Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current of the external power adapter. OS support: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.0 hub with permanently connected 40 cm long cable, printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

AXAGON PCEU-43RS PCI-Express card adds four external USB 3.2 Gen 1 ports to your desktop computer. The card is designed for fast data transfers at speeds up to 5 Gb/s. All four SuperSpeed USB ports are taken out to the bracket. The dual power supply of the controller enables standard power supply of the controller and connected USB peripherals via the PCI-Express bus as well as optional power supply from the PC power supply via the SATA power connector. The USB controller is equipped with a renowned Renesas company chipset with proven seamless compatibility, high performance and UASP support. Low profile bracket is included in the package for mounting the adapter into low profile cases. Input: PCI-Express 2.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.1 / 3.0. Number of lines: 1-Lane (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. A bandwidth of 1-Lane PCI-Express 2.0 bus is 5 Gb/s. Output: 4x external USB 3.2 Gen 1 port with USB type A-F connectors. SuperSpeed USB - USB 3.2 Gen 1 interface (before USB 3.1 Gen 1 / USB 3.0). Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 a USB 1.1. Supports transmission rates 5000 / 480 / 12 / 1.5 Mb/s (super / high / full / low speed). When connected to a PCI-Express bus version 1.0, theor. transmission rate max. 2500 Mb/s. Other features: Full Plug and Play support. Supports concurrent activity of SuperSpeed USB, USB 2.0 and USB 1.1 devices. Compliant with the final official xHCI specification revision 1.0 by USB-IF. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Fully supports Hot Plug connecting and disconnecting of USB devices while running. Standard power supply for the controller and connected USB peripherals via the PCI-Express bus. In this power supply mode, the PCIe controller can handle up to three magnetic 2.5" external disks simultaneously. Optional power supply from PC source via SATA power connector. Renesas PD720201 chipset is used. Supported operating systems: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.31 and above. Note: Drivers are only installed for Windows XP / Vista / 7. For Linux, Windows 8 / 8.1 / 10 / 11, Server 2012 / 2016 / 2019 / 2022 and later versions, no external drivers are required, they are already part of the operating system. Package contains: PCI-Express controller with a standard bracket, low-profile bracket multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Compact USB wall charger AXAGON ACU-PQ30 Sil for fast charging of up to two mobile devices at a time. With 30W of total power, the charger charges phones and other mobile devices at the highest possible speed. The adapter offers a standard USB-A connector, but also double-sided USB-C connectors. Compact size and high performance is given by the new Sil technology used. Super silicon uses advanced silicon-based materials. The charger can thus achieve smaller dimensions and at the same time safe, stable and fast charging. The efficiency is thus identical to GaN technology while maintaining a favorable price. Power Delivery 3.0 / Quick Charge 4+ USB type C output and one Quick Charge 3.0 USB type A output allow fast charging of smartphones and tablets but also charging of smaller laptops. The charger is compatible with fast charging standards for Apple iPhones, iPads, Samsung, Huawei, Honor, Xiaomi, Motorola, Sony, Google and other phones and tablets. Supports also 20W PD charging for iPhone 12, 13, 14. 27W PD charging for iPhone 13 Pro, 14 Pro and their Pro Max models. 25W SFC charging for Samsung Galaxy S20 - S23, Note, Z Fold series. The Quick Charge 4+ technology allows up to 4 times faster charging of phones than a standard USB charger. The Power Delivery 3.0 technology provides support for modern phones, but also for charging modern laptops. The AIC function recognizes the connected device and automatically selects the optimal charging speed, while the CC function ensures steady course of charging. WIV function works with wide range of input voltages, it protects the adapter against undervoltage and input overvoltage, and allows the use of multiple "national power supply standards". The advanced protection system at the charging adapter output protects the device being charged from damage. The body of the power adapter has a pleasant shape and size. Compared to classic charging adapters with same parameters, the size of the charger is a third smaller. The combination of small dimensions, achieved with Sil technology and a wide range of input voltages, makes the charger an ideal travel helper. Input: input voltage AC 100V-240V / 50-60 Hz (WIV function) supports multiple national power standards two-pin euro plug - integrated in the body of the charger Outputs: two outputs 1x USB type A port QC (phones): Quick Charge 3.0: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A, SCP: 3.3-5.5V/4A 1x USB type C port PD (notebooks, phones): Power Delivery 3.0, QC4+: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A, PPS: 3.3-11V/3A, SCP: 3.3-12V/2,2A By simultaneous charging from both outputs, SMART charging is used (max. 5V/4A) maximum power 30W (using QC port) maximum power 30W (using PD port) total maximum power 20W (QC port and PD port simultaneously) total maximum current 4A (QC port and PD port simultaneously) Supported charging technologies: USB type A port QC (max. 30W): Fast charging QC2.0, QC3.0, AFC, FCP, SCP, PE+, SMART charging max. 5V/4A USB type C ports PD (max. 30W): Fast charging PD 2.0, PD 3.0, PPS, QC2.0, QC3.0, QC4+, AFC, SFC, FCP, SCP, PE+, SMART charging max. 5V/4A The charger charges devices with the following technologies: Standard charging of all devices that support 5V and Apple iPhone 5, 6, SE, 7 charging. Smart 5V/4A Qualcomm Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A) and Apple 2.4A (iPad). QC - quick charging of devices that support Qualcomm Quick Charge 2.0, Quick Charge 3.0 and Quick Charge 4+. AFC - quick charging of devices that support Samsung Adaptive Fast Charging. SFC - quick charging of devices that support Samsung Superfast Charging. FCP - quick charging of devices that support Huawei Fast Charge Protocol. SCP - quick charging of devices that support Huawei SuperCharge Protocol. PE+ - quick charging of devices that support MediaTek Pump Express+ and Pump Express+ 2.0. PPS - charging using the Programmable Power Supply 3.3 protocol - 11V / 3A. PD - quick charging of devices that support Power Delivery 2.0 and Power Delivery 3.0. PD - quick charging of Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max phone. PD - quick charging (up to 20W) of Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 14, 14 Plus phone. PD - quick charging (up to 27W) of Apple iPhone 13 Pro, 13 Pro Max, 14 Pro, 14 Pro Max phone. SFC - quick charging (up to 25W) of Samsung Galaxy S20, S21, S22, S23 series, Note 10, 20 series, Z Fold 2, 3, 4 series phone. PD - charging (up to 30W) of Apple MacBook Air, MacBook Pro, iPad mini, iPad Air, iPad Pro. The charger supports WIV, AIC and CC functions: Wide Input Voltage - function of a wide range of input voltage; it protects the adapter against undervoltage and overvoltage at the input and allows the use of more national power standards. Automatic Intelligent Communication - function of automatic recognition of the connected device to select optimal charging parameters. Constant Output Current - the current hold function prevents the output power fluctuations; this function ensures steady course of charging. Complex output protection: OCP, OVP, OTP, OSP: Over Current Protection. Protection of output against current overload. Over Voltage Protection. Protection against overvoltage at the output. Over Temperature Protection. Protection against overheating of the adapter. Output Short Circuit protection. Short circuit protection at the output. Other features: dimensions of the charger body 84 x 36 x 32 mm including a plug, weight: 60 g, material: non-flammable plastic. Package contains: wall charger, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.

The AXAGON ADSA-FPX FAST PORT X universal adapter with USB-C 10Gbps and SATA 6G interface is designed to easily connect a 2.5" / 3.5" SATA hard drive or SSD to your computer. Thanks to the fast USB 3.2 Gen 2 interface with the transmission rate of up to 10 Gb/s, the speed of 2.5" SSDs is not limited and is approximately 20% faster than USB 3.2 Gen 1 (USB 3.0) adapters or boxes. In the package you will find a USB-C USB-C cable 60 cm with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Also included is a 12V/2A (24W) power adapter for powering 3.5" hard drives. The adapter with a 2.5" SSD/HDD just needs to be powered over the USB bus, so there is no need to manipulate the AC adapter. The USB to SATA reduction also supports all important features for seamless operation with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the reduction, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 480Mbps, USB 5Gbps, USB 20Gbps, USB4 and Thunderbolt 3/4. Device support: 2.5" SSDs/HDDs, 3.5" HDDs, SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD), SATA III - 6 Gb/s (600 MB/s) interface, max. disk capacity - all without limit. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the SATA interface used (theor. 6 Gbit/s). Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transfer in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Connection via USB 3.2 Gen 2 type C female connector. Cable USB type C male / USB type C male 60 cm long and reduction USB type C female / USB type A male included in the package. Adapter dimensions 14 x 72 x 29 mm (H x W x D). Adapter weight 19 g (without cable, without disk, without adapter). Power supply: Power supply via USB bus up to 900mA from one USB port is sufficient for 2.5" HDD/SSD. To power the adapter with a 3.5" drive, a compact external AC/DC adapter 12V - 2A (24W) with a 150 cm long cable is included. AC adapter dimensions 65 x 65 x 40 mm (including fork). Weight of AC adapter 102 g (incl. power cord). Supported OS: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Windows Server 2008 R2 / 2012 / 2016 / 2019 / 2022 / 2025 and later. Package contains: USB-C 10 Gbps - SATA adapter, cable USB-C USB-C 60 cm + USB-C -> USB-A reduction, AC adapter 100-240V / 12V-2A, multilingual guide CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.

Compact USB wall charger AXAGON ACU-PQ30W Sil for fast charging of up to two mobile devices at a time. With 30W of total power, the charger charges phones and other mobile devices at the highest possible speed. The adapter offers a standard USB-A connector, but also double-sided USB-C connectors. Compact size and high performance is given by the new Sil technology used. Super silicon uses advanced silicon-based materials. The charger can thus achieve smaller dimensions and at the same time safe, stable and fast charging. The efficiency is thus identical to GaN technology while maintaining a favorable price. Power Delivery 3.0 / Quick Charge 4+ USB type C output and one Quick Charge 3.0 USB type A output allow fast charging of smartphones and tablets but also charging of smaller laptops. The charger is compatible with fast charging standards for Apple iPhones, iPads, Samsung, Huawei, Honor, Xiaomi, Motorola, Sony, Google and other phones and tablets. Supports also 20W PD charging for iPhone 12, 13, 14. 27W PD charging for iPhone 13 Pro, 14 Pro and their Pro Max models. 25W SFC charging for Samsung Galaxy S20 - S23, Note, Z Fold series. The Quick Charge 4+ technology allows up to 4 times faster charging of phones than a standard USB charger. The Power Delivery 3.0 technology provides support for modern phones, but also for charging modern laptops. The AIC function recognizes the connected device and automatically selects the optimal charging speed, while the CC function ensures steady course of charging. WIV function works with wide range of input voltages, it protects the adapter against undervoltage and input overvoltage, and allows the use of multiple "national power supply standards". The advanced protection system at the charging adapter output protects the device being charged from damage. The body of the power adapter has a pleasant shape and size. Compared to classic charging adapters with same parameters, the size of the charger is a third smaller. The combination of small dimensions, achieved with Sil technology and a wide range of input voltages, makes the charger an ideal travel helper. Input: input voltage AC 100V-240V / 50-60 Hz (WIV function) supports multiple national power standards two-pin euro plug - integrated in the body of the charger Outputs: two outputs 1x USB type A port QC (phones): Quick Charge 3.0: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A, SCP: 3.3-5.5V/4A 1x USB type C port PD (notebooks, phones): Power Delivery 3.0, QC4+: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A, PPS: 3.3-11V/3A, SCP: 3.3-12V/2,2A By simultaneous charging from both outputs, SMART charging is used (max. 5V/4A) maximum power 30W (using QC port) maximum power 30W (using PD port) total maximum power 20W (QC port and PD port simultaneously) total maximum current 4A (QC port and PD port simultaneously) Supported charging technologies: USB type A port QC (max. 30W): Fast charging QC2.0, QC3.0, AFC, FCP, SCP, PE+, SMART charging max. 5V/4A USB type C ports PD (max. 30W): Fast charging PD 2.0, PD 3.0, PPS, QC2.0, QC3.0, QC4+, AFC, SFC, FCP, SCP, PE+, SMART charging max. 5V/4A The charger charges devices with the following technologies: Standard charging of all devices that support 5V and Apple iPhone 5, 6, SE, 7 charging. Smart 5V/4A Qualcomm Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A) and Apple 2.4A (iPad). QC - quick charging of devices that support Qualcomm Quick Charge 2.0, Quick Charge 3.0 and Quick Charge 4+. AFC - quick charging of devices that support Samsung Adaptive Fast Charging. SFC - quick charging of devices that support Samsung Superfast Charging. FCP - quick charging of devices that support Huawei Fast Charge Protocol. SCP - quick charging of devices that support Huawei SuperCharge Protocol. PE+ - quick charging of devices that support MediaTek Pump Express+ and Pump Express+ 2.0. PPS - charging using the Programmable Power Supply 3.3 protocol - 11V / 3A. PD - quick charging of devices that support Power Delivery 2.0 and Power Delivery 3.0. PD - quick charging of Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max phone. PD - quick charging (up to 20W) of Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 14, 14 Plus phone. PD - quick charging (up to 27W) of Apple iPhone 13 Pro, 13 Pro Max, 14 Pro, 14 Pro Max phone. SFC - quick charging (up to 25W) of Samsung Galaxy S20, S21, S22, S23 series, Note 10, 20 series, Z Fold 2, 3, 4 series phone. PD - charging (up to 30W) of Apple MacBook Air, MacBook Pro, iPad mini, iPad Air, iPad Pro. The charger supports WIV, AIC and CC functions: Wide Input Voltage - function of a wide range of input voltage; it protects the adapter against undervoltage and overvoltage at the input and allows the use of more national power standards. Automatic Intelligent Communication - function of automatic recognition of the connected device to select optimal charging parameters. Constant Output Current - the current hold function prevents the output power fluctuations; this function ensures steady course of charging. Complex output protection: OCP, OVP, OTP, OSP: Over Current Protection. Protection of output against current overload. Over Voltage Protection. Protection against overvoltage at the output. Over Temperature Protection. Protection against overheating of the adapter. Output Short Circuit protection. Short circuit protection at the output. Other features: dimensions of the charger body 84 x 36 x 32 mm including a plug, weight: 60 g, material: non-flammable plastic. Package contains: wall charger, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.

Fast car chargerCircular charger is a fast car charger that supports multiple fast charging standards. The device supports such fast charging technologies as QC 3.0/2.0, Huawei SCP, Samsung AFC, MTK PE+. With a high power of 30 watts, the charger will always have enough energy to quickly charge the connected device. With its classic design and small size, the charger will fit into the interior of any car. Two ports allow you to charge two devices at the same time, and the intelligent system will always choose the ideal voltage and current for the device being charged. The LED backlighting allows convenient use of the charger at night. ManufacturerBaseusModelCircular Plastic A+A 30W Dual QC3.0 Car ChargerProduct codeCCALL-YD01MaterialABS + PCColorBlackPower supply12 - 24 VOutput currentUSB1: 4.5V/5A, 5V/4.5A, 9V/3A, 12V/2.5A ; USB2: 4.5V/5A, 5V/4.5A, 9V/3A, 12V/2.5A ; USB1 + USB2: 5V/5A max.Length4.8 cm

Baseus Compact Quick Charger Do you use several different devices throughout the day that need different chargers? In a hurry it's easy to forget to bring each of them. With the Baseus CCXJ-E01 network charger, you no longer have to worry about discharging your important equipment. Equipped with 2 USB-A ports and a USB-C port guarantees versatility and compatibility with most equipment. The product also supports various protocols that speed up regular charging by up to 3 times. Safe charging To safely charge your devices, the charger is equipped with a chip that intelligently recognizes the type of device and adjusts the charging intensity. This way you can be sure that your devices will not be overcharged and are protected from short circuits and overheating. Wherever you go, with you The small size and weight of the charger mean you can take it anywhere in the world. It fits into a small handbag, backpack or laptop bag. Now you can always charge your devices at home, in the office and while traveling. Extensive functionality You do not have to wait impatiently for one device to finish charging to connect another. Two USB-A ports and one USB-C port allow you to connect even several devices at once! Charge your equipment safely without worrying about discharging at the least opportune moment and save your time. Clever design and smart technology Charge your devices 3 times faster than usual! With support for protocols such as PD 3.0 and QC 3.0, you can charge your devices with up to 20W of power. The high-performance PC material of the charger is heat-resistant, which makes it extremely durable. It distributes the heat perfectly and protects your devices even during fast charging. BrandBasuesNameSpeed Dual QC3.0 Quick Charger U+U 30WInput currentAC 100-240V 50-60Hz 0.7AUSB 1 output currentDC 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A Max.USB 2 output currentDC 4.5V/5A, 5V/4.5A, 9V/3A, 12V/2.5A MaxColorBlack

Charge two devices simultaneouslyThe charger from Baseus features two output ports: USB Type-C and USB, so you can charge two devices at the same time. Plus, both ports support fast charging. With CCGAN2L-B01 you will charge not only your Android phone, tablet or iPhone, but also your laptop or game console.Fast charging technologiesCCGAN2L-B01 supports fast charging technologies. Power Delivery 3.0 is a high-voltage charging standard that will quickly and safely charge a wide range of devices, for example, iPhone or MacBook. With Samsung Adaptive Fast Charge you can charge your device much faster than with a regular charger. Phones compatible with this technology are, for example, the Samsung S20/S9. Qualcomm Quick Charge 4.0, on the other hand, will charge your device four times faster than a regular charger. Devices compatible with this fast charging technology include, Xiaomi 10/9 Pro/8. The charger also supports the SCP protocol from Huawei. Phones compatible with SCP, for example, are, Huawei Mate 40/P30.Please note that both the device and the cable should support fast charging. Otherwise, the device will be charged in normal mode. It is also important to note that the power of the charger decreases depending on the number of devices connected.7 levels of securityThe charger from Baseus has passed numerous safety tests and earned multiple certifications, so you can use it without worry. The control chipset matches the current to each device and protects it from damage. With 7 levels of protection, both your device and charger are protected against overcharging, over-discharge, overvoltage, overheating, overcurrent, short circuit and electromagnetic field. BTC technology accelerates heat emission preventing your device from overheating.Intelligent use of gallium nitrideBy using the latest technology, the device from Baseus is 30% smaller than a standard charger and consequently takes up less space. In addition, CCGAN2L-B01 is more efficient than a standard charger because it adjusts the output power according to the battery charge level. With a wide voltage range of 100-240V and a voltage frequency range of 50~60Hz, you can use the charger anywhere in the world. The compact size makes it easy to store, which makes the device ideal for traveling.BrandBaseusModelCCGAN2L-B01Dimensions85.2 x 30.5 x 92 mmInput voltageAC 100-240V, 50/60Hz, 2.5A MaxOutput voltageType-C1/C2: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5AUSB1/USB2: 5V/3A, 9V/3A, 12V/3A, 20V/3AType-C1 + Type-C2: 65W+30W /30W + 45W, 65WUSB1 + USB2: 5V/3A (15W)Type-C1/C2 +USB1/USB2: 65W + 30WType-C1 + Type-C2 + USB1/USB2: 60W + 20W + 18WType-C1 + Type-C2 + USB1 + USB2: 60W + 20W + 15WColorblackWeight205gCompatibilityApple Book Pro 16"/ 13"/ Air, etc.iPad Pro 12.9"/Pro 11", etc.iPhone 12/11 Pro Max, etc.Huawei Mate 40/P30, etc.Samsung S20/S9, etc.Xiaomi 10/9 Pro/8Switch host/dock

Wall charger Baseus OS-Cube Pro 2xUSB-C + USB, 65W (black) Charge your devices in significantly less time. The Baseus OS-Cube Pro wall charger provides a power output of up to 65W and supports various fast charging standards. It is equipped with 3 ports (2x USB-C, 1x USB-A), allowing you to connect up to 3 devices simultaneously. The product utilizes advanced GaN5 technology, ensuring high efficiency, reliable performance, and a compact size. Fast Charging Forget about long waits for your devices to be ready for use. The total power output of the charger is a remarkable 65W, translating into impressive performance. The OS-Cube Pro model also supports various fast charging standards, including PD2.0, PD3.0, QC3.0, QC2.0, SCP, FCP, AFC, and PPS. All of this allows you to quickly charge your smartphone or even your laptop in the blink of an eye! 3 Available Ports Need to charge more devices? You don't have to use additional chargers or wait for one device to be ready before connecting another! The OS-Cube Pro model offers 3 ports – 2x USB-C and 1x USB-A, so you can, for example, connect 2 smartphones and a portable gaming console to it. What's more, the charger allows fast charging of 2 devices simultaneously – with Baseus, you'll save time! Safe Usage The Baseus OS-Cube Pro charger is not only about performance but also safety. Advanced BCT technology controls the temperature, so you don't have to worry about the product overheating. The BPS2.0 system is also noteworthy, as it intelligently regulates current parameters and adjusts them to the requirements of connected devices. The charger is also protected against overvoltage, short circuits, and overcurrent. Furthermore, Trickle charging technology protects the batteries of connected devices from damage. Compact Design Planning a vacation, a business trip, or going to a dorm? Take the charger with you and enjoy fast charging for your devices wherever you are! The OS-Cube Pro model is very lightweight and compact, weighing around 154g, with dimensions of 77.6 x 32 x 54mm. This means you can easily fit it into your suitcase, bag, or backpack! The charger is also compatible with universal voltage 110-240V, so you can use it abroad without any problems. BrandBaseusNameBaseus Cube Pro Fast Charger 2C+U 65W EU Cluster BlackModelP10152301113-00ColorBlackInputAC 110-240V 50/60Hz 1.5A max.Output USB-C1 / USB-C25V - 3A (15W), 9V - 3A (27W), 12V - 3A (36W), 15V - 3A (45W), 20V - 3.25A (65W) max.Output USB-A5V - 3A (15W), 9V - 3A (27W), 12V - 2.5A (30W) max., 20V - 1.5A (30W) max.Output USB-C1 + USB-C245W + 20W max.Output USB-C1 + USB-A45W + 18W max.Output USB-C2 + USB-A5V - 3A 15W max.Output USB-C1 + (USB-C2 + USB-A)45W + 15W max.Charging Parameters at 45W5V - 3A (15W), 9V - 3A (27W), 12V - 3A (36W), 15V - 2.5A (37.5W), 20V - 2.25A (45W) max.Charging Parameters at 20W5V - 3A (15W), 9V - 2.22A (20W), 12V - 1.67A (20W)Charging Parameters at 18W5V - 3A (15W), 9V - 2A (18W), 12V - 1.5A (18W)MaterialPCDimensions77.6 x 32 x 54mmWeightApprox. 154g

Baseus CCSUPP-E02 AC Charger The accessory features a dual port: USB and USB-C, so you can charge 2 devices simultaneously. The compact design allows for convenient storage, and a number of safety features protect your device and the accessory from damage. The product also supports fast charging protocols to save you time. The 100-240V AC voltage allows you to use it anywhere in the world. Compact The dimensions of the charger are only 85.4 x 35 x 30 mm, which is about the size of a charging case for headphones. This makes it easy to store, and it also makes it easy to connect other devices to the extender without obstructing the other outlets. Intelligent solutions The material used in the production of the accessory is distinguished by its high density, good heat conductivity and efficient energy conversion. Super Si technology affects the smaller size of the charger and provides faster and safer charging. In addition, the smart chip is responsible for temperature control. Fast charging The accessory supports fast charging protocols such as PD 3.0, QC 3.0, Apple 2.4 and BC 1.2, so the charger will renew your device's energy up to 50% in about 30 minutes. While the PadPro 2021 will be ready for use again in about 2h. Wide compatibility With the CCSUPP-E02 you will charge Android and iOS smartphones and tablets, for example, iPhone 12, Huawei Mate 40, or Samsung S21. What's more, Baseus charger will also renew the energy of wireless headphones, smartwatch, or smartband. Safe charging The charger is equipped with a number of safety features to protect both the accessory and your device. CCSUPP-E02 has protection against short circuit, overheating, overcurrent, overcharging, over-discharge, etc. In addition, the product matches the charging power to your device to avoid overcharging. BrandBaseusModelCCSUPP-E02Input voltageAC 100V - 240V ~, 50/60 Hz, 1.2A MaxOutput USB-C 5V 3A, 9V 3A, 12V 2.5A, 15V 2A, 20V 1.5AOutput USB-A5V 3A, 9V 3A, 12V 2.5A, 15V 2A, 20V 1.5AMaximum power (USB-C + USB-A)18W + 12WColorwhiteDimensions85.4 x 35 x 30 mmFast charging protocolsPD 3.0, QC 3.0, Apple 2.4, BC 1.2, etc.Compatibilitytablet: Pad Pro 12.9” 2021/2020/2018, Pad Pro 11” 2020/2018, Pad Air 4 10.9” 2020 smartphone: iPhone 12/12 Pro / 12 Pro Max / 12 mini / 11/11 Pro / 11 Pro Max / XS / XS Max / X / XR / 8/9 Plus, etc.; Huawei Mate 40 Pro / 40 Pro + / 40 RS / 40 / Mate 30/30 Pro / P40 / P40 Pro / P40 Pro + / P30 / P30 Pro, etc.; Samsung S21 series / S20 series / S10 series / S9 / Note 9, etc.; Xiaomi 11/10/10 Pro / 10 Ultra / Mix 2 / Redmi K40 series / Redmi K30 series, etc. wireless headphones, smartwatch, smartband