Kõik hinnakirjad

The ROG Strix 18 (G815LR-S8082) from Asus impresses with its high performance and eye-catching design. This gaming notebook works smoothly even under high loads with an Intel® Core™ Ultra 7 255HX processor, 32 gigabytes of lightning-fast DDR5 RAM and a one terabyte M.2 PCIe SSD. The display on the 45.7 cm (18") FHD+ display with 100% coverage for sRGB and a refresh rate of up to 144 Hz is provided by an NVIDIA GeForce RTX 5070 Ti with 12 gigabytes of GDDR7 graphics memory. This gaming machine is also powerfully networked via Wi-Fi 7 or 2.5 gigabit LAN and also has HDMI and Bluetooth 5.4 and Thunderbolt 5. RGB design elements such as the illuminated keyboard and light areas built into the housing underline the inspiring design of this device, whose powerful hardware is kept at a low temperature via a sophisticated cooling system. Type gaming notebook Color grey/green EAN 4711387989227 Manufacturer no. 90NR0LT2-M00350 ROG Strix G18 series Processor architecture Arrow Lake Processor name Intel® Core™ Ultra 7 255HX (20 cores / 20 threads) / boost clock 5.2 GHz Processor core layout 8 performance cores (8 threads) / base clock 2.4 GHz / boost clock 5.2 GHz 12 efficiency cores (12 threads) / base clock 1.8 GHz / boost clock 4.5 GHz Processor AI/NPU Intel® AI Boost / Performance (TOPS) 13 Total memory capacity Maximum memory supported RAM type DDR5 (5600 MHz) RAM slots 2 memory banks available, 1 of which is occupied RAM type SO-DIMM Display image 45.7 cm (18 inches) Display frequency 144 Hz Display resolution 1,920 x 1,200 pixels Display type LED Display aspect ratio 16:10 Display feature anti-glare Display contrast 1000:1 Display brightness 300 cd/m? Display Dolby Vision Yes Display G-Sync Yes Display sRGB 100% coverage Display Pantone validated Yes Graphics Type NVIDIA GeForce RTX 5070 Ti Notebook GPU Graphics memory 12 GB (GDDR7) Graphics performance TGP Graphics Dynamic Boost Graphics Maximum overall performance of the GPU Graphic MUX switch Yes Graphics connections 1x HDMI (HDMI version: 2.1) Mainboard connections 1x RJ-45, 2x Thunderbolt 5, 3x USB-A 3.2 (10 Gbit/s) The designation USB 3.2 Gen 2 corresponds to the previous designations USB 3.1 Gen 2 or USB 3.1. Mainboard interfaces 2x M.2 Data storage number 1 Data storage total capacity 1 TB Data storage Data storage 1 capacity Optical drive type not present Camera webcam number Camera infrared sensor Camera special features Sound connections 1x headphone/microphone combination connection Sound speakers 2.0 Sound special features Dolby Atmos, Smart Amp Sound microphone available Sound Microphone Details Array Microphones Connectivity LAN LAN 2.5 gigabit Connectivity Wi-Fi Wi-Fi 7 Connectivity Bluetooth Bluetooth 5.4 Input keyboard layout Input functions Input Mouse/Touchpad Touchpad Lighting housing RGB Keyboard lighting RGB Operating system without operating system Power supply battery power source Power supply Number of cells Power supply capacity Feature ROG Intelligent Cooling, Aura Sync Light Bar Accessories available 280 watt power supply Dimensions Width: 399mm x Height: 32mm x Depth/Length: 298mm Weight 320 grams

The ROG Strix 18 (G814JZR-N6008W) from Asus impresses with its high performance and eye-catching design. This gaming notebook works smoothly even under high loads with an Intel® Core™ Ultra 9 275HX processor, 32 gigabytes of lightning-fast DDR5 RAM and a 2 terabyte M.2 PCIe SSD. The display on the 45.7 cm (18") QHD+ display with 100% coverage for DCI-P3 and a refresh rate of up to 240 Hz is provided by an NVIDIA GeForce RTX 5080 with 16 gigabytes of GDDR7 graphics memory. This gaming machine is also powerfully networked via Wi-Fi 7 or 2.5 gigabit LAN and also has HDMI and Bluetooth 5.4 and Thunderbolt 5. RGB design elements such as the illuminated keyboard and light areas built into the housing underline the inspiring design of this device, whose powerful hardware is kept at a low temperature via a sophisticated cooling system. Type gaming notebook Color grey/green EAN 4711387934326 Manufacturer no. 90NR0LC2-M00650 ROG Strix G18 series Processor architecture Arrow Lake Processor name Intel® Core™ Ultra 9 275HX (24 cores / 24 threads) / boost clock 5.4 GHz Processor core layout 8 performance cores (8 threads) / base clock 2.7 GHz / boost clock 5.4 GHz 16 efficiency cores (16 threads) / base clock 2.1 GHz / boost clock 4.6 GHz Processor AI/NPU Intel® AI Boost / Performance (TOPS) 13 Total memory capacity Maximum memory supported RAM type DDR5 (5600 MHz) RAM slots 2 memory banks available, 2 of which are occupied RAM type SO-DIMM Display image 45.7 cm (18 inches) Display frequency 240 Hz Display resolution 2,560 x 1,600 pixels Display type LED Display aspect ratio 16:10 Display feature anti-glare Display contrast 1000:1 Display brightness 500 cd/m? Display detail ROG Nebula display Display Dolby Vision Yes Display G-Sync Yes Display DCI-P3 100% coverage Display Pantone validated Yes Graphics Type NVIDIA GeForce RTX 5080 Notebook GPU Graphics memory 16 GB (GDDR7) Graphics performance Maximum overall performance of the GPU Graphic MUX switch Yes Graphics connections 1x HDMI (HDMI Version: 2.1) Mainboard connections 1x RJ-45, 2x Thunderbolt 5, 3x USB-A 3.2 (10 Gbit/s) The designation USB 3.2 Gen 2 corresponds to the previous designations USB 3.1 Gen 2 or USB 3.1. Mainboard interfaces 2x M.2 Data storage number 1 Data storage total capacity 2 TB Data storage Data storage 1 capacity Optical drive type not present Camera webcam number Camera infrared sensor Camera special features Sound connections 1x headphone/microphone combination connection Sound speakers 2.0 Sound special features Dolby Atmos, Smart Amp Sound microphone available Sound Microphone Details Array Microphones Connectivity LAN LAN 2.5 gigabit Connectivity Wi-Fi Wi-Fi 7 Connectivity Bluetooth Bluetooth 5.4 Input keyboard layout Input functions Input Mouse/Touchpad Touchpad Lighting housing RGB Keyboard lighting RGB Microsoft Windows 11 Home operating system Operating system Additional information The operating system recovery data does not necessarily have to be included in the form of a data carrier, but can also be pre-installed on the hard drive. Notebooks with a preinstalled Microsoft Windows operating system may not be compatible with older Microsoft Windows versions and alternative operating systems. Power supply battery power source Power supply Number of cells Power supply capacity Feature ROG Intelligent Cooling, Aura Sync Light Bar Accessories available 380 watt power supply Dimensions Width: 399mm x Height: 32mm x Depth/Length: 298mm Weight 320 grams

The ASUS ROG Strix Scope II 96 96% format gaming keyboard retains all function and number keys in a more compact and efficient layout that saves desk space. Your pre-lubricated, hot-swappable ROG NX Snow Switches provide great tactile feel and consistency with quick actuation. The ROG Strix Scope II 96 can be connected wirelessly via Bluetooth (up to three devices simultaneously), 2.4 GHz with ROG SpeedNova Wireless technology, or wired via USB. The included ROG Omni receiver supports wireless connection to multiple compatible devices. The F1-F5 keys are pre-programmed as hotkeys for the Xbox Game Bar and recording, and a multifunction button and multiwheel allow for intuitive control of media playback, volume and RGB lighting. Pre-lubricated keyboard stabilizers create less friction for a smoother keystroke and stability for longer key presses, and the unique integrated dampening foam with additional switch dampening pad structure absorbs ping noises and echoes for improved key acoustics. The PBT keycaps are durable and provide a premium typing experience. ROG's unique UV-coated space bar and ergonomic design with three tilt positions and removable wrist support complete the overall package perfectly. Type gaming keyboard Color black EAN 4711387140420 Manufacturer no. 90MP037A-BKDA01 Suitable for PC, tablet, notebook, smartphone Application area gaming Connection type radio, cable Connection Connectivity 2.4GHz USB receiver, Bluetooth Connection cable length 2 meters Connection port 1x USB Layout German Format 96% Keyboard keys key/switch technology Keyboard switch type Keyboard switch characteristics Keyboard hot-swappable Keyboard features anti-ghosting, n-key rollover Keyboard lighting Single key lighting, RGB Keyboard polling rate 1,000 Hz Removable keyboard wrist rest Keyboard feet are adjustable in inclination Special features PBT doubleshot keycaps, multifunction key & multiwheel, streaming hotkeys, spacebar in ROG design, ROG keyboard stabilizers, silicone dampening foam, AURA Sync RGB lighting Supported operating systems Windows 11 Accessories available USB cable, ROG Omni receiver Dimensions Width: 377mm x Height: 40mm x Depth/Length: 131mm Weight 1kg

The ASUS ROG Strix Scope II 96 96% format gaming keyboard retains all function and number keys in a more compact and efficient layout that saves desk space. Your pre-lubricated, hot-swappable ROG NX Snow Switches provide great tactile feel and consistency with quick actuation. The ROG Strix Scope II 96 can be connected wirelessly via Bluetooth (up to three devices simultaneously), 2.4 GHz with ROG SpeedNova Wireless technology, or wired via USB. The included ROG Omni receiver supports wireless connection to multiple compatible devices. The F1-F5 keys are pre-programmed as hotkeys for the Xbox Game Bar and recording, and a multifunction button and multiwheel allow for intuitive control of media playback, volume and RGB lighting. Pre-lubricated keyboard stabilizers create less friction for a smoother keystroke and stability for longer key presses, and the unique integrated dampening foam with additional switch dampening pad structure absorbs ping noises and echoes for improved key acoustics. The PBT keycaps are durable and provide a premium typing experience. ROG's unique UV-coated space bar and ergonomic design with three tilt positions and removable wrist support complete the overall package perfectly. Type gaming keyboard Color white EAN 4711387487075 Manufacturer no. 90MP037A-BKDA30 Suitable for PC, tablet, notebook, smartphone Application area gaming Connection type radio, cable Connection Connectivity 2.4GHz USB receiver, Bluetooth Connection cable length 2 meters Connection port 1x USB Layout German Format 96% Keyboard keys key/switch technology Keyboard switch type Keyboard switch characteristics Keyboard hot-swappable Keyboard features anti-ghosting, n-key rollover Keyboard lighting Single key lighting, RGB Keyboard polling rate 1,000 Hz Removable keyboard wrist rest Keyboard feet are adjustable in inclination Special features PBT doubleshot keycaps, multifunction key & multiwheel, streaming hotkeys, spacebar in ROG design, ROG keyboard stabilizers, silicone dampening foam, AURA Sync RGB lighting Supported operating systems Windows 11 Accessories available USB cable, ROG Omni receiver Dimensions Width: 377mm x Height: 40mm x Depth/Length: 131mm Weight 1kg

The ASUS ROG XREAL R1 Gaming AR glasses are specially designed for demanding gamers and combine the latest AR technology with exceptional image quality and high mobility. Equipped with high-quality Sony Micro-OLED displays, the glasses create an impressive virtual image with a screen size of up to 171 inches and ensure razor-sharp images and intense colors thanks to the Full HD resolution per eye. The world's first gaming AR glasses with a 240 Hz refresh rate deliver particularly fluid movements and respond almost instantaneously with an extremely fast response time of just 0.01 ms - ideal for fast shooters, competitive gaming and immersive multimedia applications. Thanks to native 3DoF technology, virtual screens can be positioned stably in space or moved dynamically with head movements, creating a particularly natural and immersive user experience. This is complemented by electrochromic lenses with automatic transparency adjustment, which can be flexibly adapted to different lighting conditions. The integrated “Sound by Bose” audio system also ensures clear and spatial sound directly in the glasses. Weighing only around 91 grams, the ROG XREAL R1 remains pleasantly light and comfortable even during prolonged use. The connection is easy via USB-C and enables direct use with gaming handhelds such as the ROG Ally, PCs, smartphones or consoles in conjunction with the included ROG Control Dock. Features such as Instant 3D, HDR support, GamePlus features as well as extensive customization options via Armory Crate and DisplayWidget Center make the ASUS ROG XREAL R1 an innovative high-end solution for mobile gaming and modern immersive entertainment. Type gaming AR glasses Color black EAN 4711636465144 Manufacturer no. 90LJ00M5-B02670 Suitable for augmented/mixed reality Display type micro OLED Display resolution (total) 1920 x 1080 pixels Display resolution (per eye) 960 x 1080 pixels Display refresh rate 240 Hz Display size 1.4 cm (0.55 inches) Display field of view 57 ° Audio speakers with 2.0 sound and microphone Feature Electrochromic dimming, 3 tint levels, Native 3DoF, (Anchor & Follow mode), Instant 3D, connection to the ROG ecosystem with ROG Ally, Sound by Bose, USB-C plug-and-play connectivity, compatibility with the ROG Control Dock, 3D Mode Support, Capacitive Sensor, Aura RGB, Flicker Free, Low Blue Light, Eye Comfort (AR), Adjustable temples Further information Control Dock: GamePlus, Game Visual, HDR10, 21.5 x 2.5 x 10 cm. 3x USB-C, DP, 2x HDMI Note Projects a 171-inch virtual screen from 4 meters away, covering 95% of the focused viewing area Accessories included USB-A/C cable, USB-C cable, ROG Control Dock, nose pad, removable prescription lens frame, carrying case, cleaning cloth, quick start guide Dimensions Width: 153.2 mm x Height: 49.1 mm x Depth/Length: 166.2 mm Weight 91 grams

The ASUS ROG XREAL R1 Gaming AR glasses are specially designed for demanding gamers and combine the latest AR technology with exceptional image quality and high mobility. Equipped with high-quality Sony Micro-OLED displays, the glasses create an impressive virtual image with a screen size of up to 171 inches and ensure razor-sharp images and intense colors thanks to the Full HD resolution per eye. The world's first gaming AR glasses with a 240 Hz refresh rate deliver particularly fluid movements and respond almost instantaneously with an extremely fast response time of just 0.01 ms - ideal for fast shooters, competitive gaming and immersive multimedia applications. Thanks to native 3DoF technology, virtual screens can be positioned stably in space or moved dynamically with head movements, creating a particularly natural and immersive user experience. This is complemented by electrochromic lenses with automatic transparency adjustment, which can be flexibly adapted to different lighting conditions. The integrated “Sound by Bose” audio system also ensures clear and spatial sound directly in the glasses. Weighing only around 91 grams, the ROG XREAL R1 remains pleasantly light and comfortable even during prolonged use. The connection is easy via USB-C and enables direct use with gaming handhelds such as the ROG Ally, PCs, smartphones or consoles in conjunction with the included ROG Control Dock. Features such as Instant 3D, HDR support, GamePlus features as well as extensive customization options via Armory Crate and DisplayWidget Center make the ASUS ROG XREAL R1 an innovative high-end solution for mobile gaming and modern immersive entertainment. Type gaming AR glasses Color black EAN 4711636465090 Manufacturer no. 90LJ00M5-B01670 Suitable for augmented/mixed reality Display type micro OLED Display resolution (total) 1920 x 1080 pixels Display resolution (per eye) 960 x 1080 pixels Display refresh rate 240 Hz Display size 1.4 cm (0.55 inches) Display field of view 57 ° Audio speakers with 2.0 sound and microphone Feature Electrochromic dimming, 3 tint levels, Native 3DoF, (Anchor & Follow mode), Instant 3D, connection to the ROG ecosystem with ROG Ally, Sound by Bose, USB-C plug-and-play connectivity, compatibility with the ROG Control Dock, 3D Mode Support, Capacitive Sensor, Aura RGB, Flicker Free, Low Blue Light, Eye Comfort (AR), Adjustable temples Further information Control Dock: GamePlus, Game Visual, HDR10, 21.5 x 2.5 x 10 cm. 3x USB-C, DP, 2x HDMI Note Projects a 171-inch virtual screen from 4 meters away, covering 95% of the focused viewing area Accessories included USB-A/C cable, USB-C cable, ROG Control Dock, nose pad, removable prescription lens frame, carrying case, cleaning cloth, quick start guide Dimensions Width: 153.2 mm x Height: 49.1 mm x Depth/Length: 166.2 mm Weight 91 grams

ASUS ROG Zephyrus G14 (GU405AR-SY044W) combines a compact, high-quality design with efficient hardware for gaming, creative applications and everyday use. Despite its slim, 14-inch format, the notebook offers functions that can easily cope with even demanding tasks. Inside there is an Intel® Core™ Ultra 9 386H processor, combining high computing power with economical energy consumption. The graphics performance is provided by the NVIDIA GeForce RTX 5070 Ti card with 12 GB of GDDR7 graphics memory. The equipment is complemented by 96 GB of LPDDR5X RAM and a fast M.2 PCIe SSD with a capacity of 2 TB, which enables short loading times and smooth multitasking. The 14-inch OLED display has a resolution of 2880 x 1800 pixels and offers a refresh rate of up to 120 Hz. Thanks to 100% coverage of the DCI-P3 color space, it is suitable not only for gaming, but also for editing photos and videos with precise color reproduction. With Thunderbolt 4, Wi-Fi 7 and Bluetooth 5.4, Zephyrus G14 is designed with modern connectivity in mind. The RGB backlit keyboard complements the functions and allows you to individually customize the system. Enter gaming notebook Color white EAN 4711636509725 Manufacturer number 90NR0P93-M002B0 Copilot+ AI capabilities Processor name Intel® Core™ Ultra 9 386H (16 cores / 16 threads) / boost clock 4.9 GHz Processor core layout 4 performance cores (4 threads) / base clock 2.1 GHz / boost clock 4.9 GHz 8 performance cores (8 threads) / base clock 1.6 GHz / boost clock 3.7 GHz 4 performance cores (4 threads) / base clock 1.6 GHz / boost clock 3.5 GHz AI Processor/NPU Intel® AI Boost/Performance (TOPS) 50 Total memory capacity RAM type LPDDR5X (8533 MHz) Projected image 35.6 cm (14 inch) Display frequency 120 Hz Display resolution 2880 x 1800 pixels OLED display type Display aspect ratio 16:10 Display with anti-reflective coating Display contrast 1000000:1 Display brightness 1100 cd/m? DisplayHDR True Black 1000 display details Displays 100% DCI-P3 coverage Graphics type NVIDIA GeForce RTX 5070 Ti graphics card for notebook Graphics memory 12 GB (GDDR7) Graphics connectors 1x HDMI (HDMI version: 2.1) Connectors on the motherboard 1x Thunderbolt 4, 2x USB-A 3.2 (5 Gbit/s), 1x USB-C 3.2 (10 Gbit/s) The USB 3.2 Gen 1 designation corresponds to the previous USB 3.1 Gen 1 or USB 3.0 designations. The USB 3.2 Gen 2 designation corresponds to the previous USB 3.1 Gen 2 or USB 3.1 designations. Data storage number 1 Total data storage capacity 2 TB Data storage Data storage 1 capacity Missing optical drive type Webcam number Camera window Hello Camera privacy screen Camera with infrared sensor Special camera features Audio calls 1x headphone/microphone connection Speakers 2.0 Special audio features Smart Amplifier Audio microphone available SD card reader Wi-Fi connectivity Wi-Fi 7 Bluetooth connectivity Bluetooth 6.0 Input keyboard layout Input functions Mouse/Touchpad input Touchpad RGB keyboard lighting Microsoft Windows 11 Home operating system Power Battery power source Available accessories 250 W power supply Dimensions Width: 31.1 cm x Height: 28.3 cm x Depth/Length: 22 cm Weight 1.6 kg

The TUF Gaming A16 (FA607NUQ-RL038W) is a powerful notebook that is suitable for almost all applications, but still remains sufficiently mobile with a weight of just over two kilograms. The basis of this device consists of its AMD Ryzen 7 170 processor, 16 gigabytes of DDR5 RAM and a 512 gigabytes M.2 PCIe SSD. The NVIDIA GeForce RTX 4050 graphics unit provides enough power for video editing, streaming and gaming, powering a 40.6 cm (16") FHD+ display with a refresh rate of 144 Hz. This notebook also has ports for USB-C, HDMI and LAN and supports network connections according to the Wi-Fi 6 (802.11ax) standard. Type gaming notebook Color gray EAN 4711636492607 Manufacturer no. 90NR0QF3-M00570 TUF Gaming series Processor name AMD Ryzen 7 170 (8 cores / 16 threads) / base clock 2.3 GHz / boost clock 4.75 GHz Total memory capacity Maximum memory supported RAM type DDR5 (4800 MHz) RAM slots 2 memory banks available, 2 of which are occupied RAM type SO-DIMM Display image 40.6 cm (16 inches) Display frequency 144 Hz Display resolution 1,920 x 1,200 pixels Display type IPS Display feature anti-glare Display contrast 1000:1 Display brightness 300 cd/m? Display G-Sync Yes Display Adobe 75.35% coverage Display NTSC 45% coverage Graphics type NVIDIA GeForce RTX 4050 Notebook GPU Graphics memory 6 GB (GDDR6) Graphics performance TGP Graphics Dynamic Boost Graphics Maximum overall performance of the GPU Graphic boost clock Graphic MUX switch Yes Graphics connections 1x HDMI (HDMI Version: 2.1) Mainboard connections 1x RJ-45, 2x USB-A 3.2 (5 Gbit/s), 2x USB-C 3.2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designations USB 3.1 Gen 1 or USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designations USB 3.1 Gen 2 or USB 3.1. Mainboard interfaces 2x M.2 Data storage number 1 Data storage total capacity 512 GB Data storage Data storage 1 capacity Optical drive type not present Camera webcam number Camera special features Sound connections 1x headphone/microphone combination connection Sound speakers 2.0 Sound special features Dolby Atmos Sound microphone available Connectivity LAN LAN 10/100/1000 MBit/s Connectivity WLAN Wi-Fi 6 (802.11ax) Connectivity Bluetooth Bluetooth 5.3 Input keyboard layout Input functions Input Mouse/Touchpad Touchpad Keyboard lighting RGB Microsoft Windows 11 Home operating system Power supply battery power source Power supply Number of cells Power supply capacity Power supply charging option Fast charging power supply Protective functions against theft socket for Kensington brand cable lock Protective functions License/data protection Trusted Platform Module (TPM) Feature Aura Sync Accessories available 180 watt power supply Dimensions Width: 354mm x Height: 26.7mm x Depth/Length: 251mm Weight 2.2kg

The TUF Gaming A18 (FA808UM-S8012W) is a powerful notebook that is suitable for almost all applications, but still remains sufficiently mobile with a weight of just over two kilograms. The basis of this device consists of its AMD Ryzen 7 260 processor, 16 gigabytes of DDR5 RAM and a one terabyte M.2 PCIe SSD. The NVIDIA GeForce RTX 5060 graphics unit provides enough power for video editing, streaming and gaming, powering a 45.7 cm (18") FHD+ display with a refresh rate of 144 Hz. This notebook also has ports for USB4, HDMI and LAN and supports network connections according to the Wi-Fi 6E (802.11ax) standard. Type gaming notebook Color gray EAN 4711636030472 Manufacturer no. 90NR0NN1-M000H0 TUF Gaming series Processor name AMD Ryzen 7 260 (8 cores / 16 threads) / base clock 3.8 GHz / boost clock 5.1 GHz Processor AI/NPU AMD Ryzen™ AI / Performance (TOPS) 16 Total memory capacity RAM type DDR5 RAM slots 2 memory banks available RAM type SO-DIMM Display image 45.7 cm (18 inches) Display frequency 144 Hz Display resolution 1,920 x 1,200 pixels Display type IPS Display aspect ratio 16:10 Display property anti-reflective Display brightness 300 cd/m? Display sRGB 100% coverage Graphics type NVIDIA GeForce RTX 5060 Graphics memory 8 GB (GDDR7) Graphics performance TGP Graphics Dynamic Boost Graphics Maximum overall performance of the GPU Graphic boost clock Graphics connections 1x HDMI (HDMI version: 2.1) Mainboard connections 1x RJ-45, 1x USB-A 2.0, 2x USB-A 3.2 (5 Gbit/s), 1x USB-C 3.2 (10 Gbit/s), 1x USB4 (40 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designations USB 3.1 Gen 1 or USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designations USB 3.1 Gen 2 or USB 3.1. Data storage number 1 Data storage total capacity 1 TB Data storage Data storage 1 capacity Optical drive type not present Camera webcam number Camera Windows Hello Camera infrared sensor Camera special features Sound connections 1x headphone/microphone combination connection Sound speakers 2.0 Sound special features Dolby Atmos, Smart Amp Sound microphone available Connectivity LAN LAN 10/100/1000 MBit/s Connectivity Wi-Fi Wi-Fi 6E Connectivity Bluetooth Bluetooth 5.3 Input keyboard layout Input functions Input Mouse/Touchpad Touchpad Keyboard lighting RGB Microsoft Windows 11 Home operating system Power supply battery power source Power supply Number of cells Power supply capacity Accessories available 240 watt power supply Dimensions Width: 399mm x Height: 26.7mm x Depth/Length: 283mm Weight 2.6kg

The TUF Gaming A18 (FA808UP-S8083W) is a powerful notebook that is suitable for almost all applications, but still remains sufficiently mobile with a weight of just over two kilograms. The basis of this device consists of its AMD Ryzen 7 260 processor, 16 gigabytes of DDR5 RAM and a one terabyte M.2 PCIe SSD. The NVIDIA GeForce RTX 5070 graphics unit provides enough power for video editing, streaming and gaming, powering a 45.7 cm (18") FHD+ display with a refresh rate of 144 Hz. This notebook also has ports for USB4, HDMI and LAN and supports network connections according to the Wi-Fi 6E (802.11ax) standard. Type gaming notebook Color gray EAN 4711636352024 Manufacturer no. 90NR0NL1-M004C0 TUF Gaming series Processor architecture Zen 4 (Hawk Point) Processor name AMD Ryzen 7 260 (8 cores / 16 threads) / base clock 3.8 GHz / boost clock 5.1 GHz Total memory capacity RAM type DDR5 RAM slots 2 memory banks available, 1 of which is occupied RAM type SO-DIMM Display image 45.7 cm (18 inches) Display frequency 144 Hz Display resolution 1,920 x 1,200 pixels Display type IPS Display aspect ratio 16:10 Display feature anti-glare Display contrast 1000:1 Display brightness 300 cd/m? Display G-Sync Yes Display sRGB 100% coverage Display Adobe 75.35% coverage Display NTSC 72% coverage Graphics type NVIDIA GeForce RTX 5070 Notebook GPU Graphics memory 8 GB (GDDR7) Graphics performance TGP Graphics Dynamic Boost Graphics Maximum overall performance of the GPU Graphic boost clock Graphic MUX switch Yes Graphics connections 1x HDMI (HDMI version: 2.1) Mainboard connections 1x RJ-45, 1x USB-A 2.0, 2x USB-A 3.2 (10 Gbit/s), 1x USB-C 3.2 (10 Gbit/s), 1x USB4 (40 Gbit/s) The designation USB 3.2 Gen 2 corresponds to the previous designations USB 3.1 Gen 2 or USB 3.1. Mainboard interfaces 2x M.2 Data storage number 1 Data storage total capacity 1 TB Data storage Data storage 1 capacity Optical drive type not present Camera webcam number Camera Windows Hello Camera infrared sensor Camera special features Sound connections 1x headphone/microphone combination connection Sound speakers 2.0 Sound special features Dolby Atmos Sound Microphone Details Array microphone Connectivity LAN LAN 10/100/1000 MBit/s Connectivity Wi-Fi Wi-Fi 6E Connectivity Bluetooth Bluetooth 5.3 Input keyboard layout Input functions Input Mouse/Touchpad Touchpad Keyboard lighting RGB Microsoft Windows 11 Home operating system Operating system Additional information The operating system recovery data does not necessarily have to be included in the form of a data carrier, but can also be pre-installed on the hard drive. Notebooks with a preinstalled Microsoft Windows operating system may not be compatible with older Microsoft Windows versions and alternative operating systems. Power supply battery power source Power supply Number of cells Power supply capacity Accessories available 240 watt power supply Dimensions Width: 399mm x Height: 26.7mm x Depth/Length: 283mm Weight 2.6kg

Zenbook 14 (UX3405CA-PZ092X) is slim, fast and impresses with a 35.6 cm (14") OLED display with a resolution of 2880 x 1800 pixels and powerful hardware. Inside this powerful hardware, which weighs 1,200 grams and is less than 15 mm thick, is an Intel® Core™ Ultra 9 285H and 32 Gigabytes of LPDDR5X RAM for smooth operation A one-terabyte SSD connected via PCIe provides further speed increases. Zenbook 14 connects to the Internet using the Wi-Fi 7 standard and also has Thunderbolt 4, Bluetooth 5.4 and HDMI. Notebook type Color silver EAN 4711387828533 Manufacturer number 90NB14W4-M00ER0 Artistic multimedia modeling Processor name Intel® Core™ Ultra 9 285H (16 cores / 16 threads) / 5.4 GHz boost clock Processor core layout 6 performance cores (6 threads) / 2.9 GHz base clock / 5.4 GHz boost clock 8 performance cores (8 threads) / 2.7 GHz base clock / 4.5 GHz boost clock 2 performance cores (2 threads) / 1 GHz base clock / 2.5 GHz boost clock AI Processor/NPU Intel® AI Boost/Performance (TOPS) 13 Total memory capacity RAM type LPDDR5X Projected image 35.6 cm (14 inch) Display frequency 120 Hz Display resolution 2880 x 1800 pixels OLED display type Display aspect ratio 16:10 Display brightness 400 cd/m? Displays 100% DCI-P3 coverage Graphics type: Intel® Arc™ 140T Graphics connectors 1x HDMI (HDMI version: 2.1) Connectors on the motherboard 2x Thunderbolt 4, 1x USB-A 3.2 (5 Gbit/s) The USB 3.2 Gen 1 designation corresponds to the previous USB 3.1 Gen 1 or USB 3.0 designations. Data storage number 1 Total data storage capacity 1 TB Data storage Data storage 1 capacity Missing optical drive type Webcam number Camera window Hello Camera privacy screen Camera with infrared sensor Special camera features Audio calls 1x headphone/microphone connection Speakers 2.0 Special audio features Smart Amplifier Audio microphone available Wi-Fi connectivity Wi-Fi 7 Bluetooth connectivity Bluetooth 5.4 Input keyboard layout Mouse/Touchpad input Touchpad with NumberPad Touch screen available Illuminated keyboard lighting Microsoft Windows 11 Pro operating system Power Battery power source Power supply Number of cells Power supply power Security Features License/Data Protection Trusted Platform Module (TPM) Dimensions Width: 312.4 mm x Height: 14.9 mm x Depth/Length: 220.1 mm Weight 1.3 kg

<h3>Aurzen Castplay Pro Wireless Adapter</h3> <p>The Aurzen Castplay Pro Wireless Adapter is a compact device that lets you quickly stream content from your phone, tablet, or laptop to a larger screen. Thanks to its wireless connection, you can comfortably watch movies, presentations, or photos on your TV or projector without using any cables. Just plug in the adapter and start streaming—this solution works perfectly both at home and at work.</p> <p> (image) </p><h3>Simple Connection – Plug &amp; Play</h3> <p>The Aurzen Castplay Pro operates in plug-and-play mode, meaning it requires no complicated setup or installation of additional apps. Once connected, you can immediately start streaming content to a larger screen. This makes the adapter easy to use even for those who haven’t used similar solutions before.</p> <p> (image) </p><h3>Wireless content streaming</h3> <p>The adapter allows you to stream content from mobile devices and computers to a TV or projector. In practice, this means you can watch movies from popular streaming services, view photos and videos, or give presentations without having to connect long cables. Wireless transmission provides greater freedom of use and keeps your workspace or entertainment area tidy.</p> <p> (image) </p><h3>Wide device compatibility</h3> <p>The Aurzen Castplay Pro works with many popular devices equipped with a USB-C port that supports video transmission (DisplayPort Alternate Mode). The adapter is compatible with, among others, select iPhone models, Samsung Galaxy and Google Pixel smartphones, as well as MacBook laptops and iPad tablets with a USB-C port. The device also supports the Nintendo Switch and Switch OLED consoles, allowing you to stream video from the console without using a traditional docking station.</p> <p> (image) </p><h3>Simultaneous charging and video transmission</h3> <p>While using the adapter, you can simultaneously charge the device from which the video is being transmitted. This feature allows you to watch movies, play games, or give presentations without worrying about your smartphone or laptop battery draining quickly.</p> <p> (image) </p><h3>Compact and lightweight design</h3> <p>The Aurzen Castplay Pro is designed to take up as little space as possible. Its small size and weight of approximately 27 g mean the adapter fits easily in a pocket, bag, or backpack. This allows you to always have it with you and use it at home, in the office, or while traveling.</p> <p> (image) </p> <div class="table-wrapper"> <p> </p> <h3></h3> <table> <tbody> <tr><th>Manufacturer</th><td>AURZEN</td></tr><tr><th>Model</th><td>Castplay Pro</td></tr><tr><th>Device type</th><td>wireless video adapter</td></tr><tr><th>Connectivity</th><td>wireless video transmission</td></tr><tr><th>Connector</th><td>USB-C</td></tr><tr><th>Video support</th><td>USB-C devices with DisplayPort Alternate Mode support</td></tr><tr><th>Plug &amp; Play</th><td>Yes</td></tr><tr><th>Simultaneous device charging</th><td>Yes</td></tr><tr><th>Compatibility – smartphones</th><td>iPhone 15, 16, 17 (with USB-C), Samsung Galaxy S / Note / Z (S8, Note8 and newer – DeX support), Google Pixel 8 / Pixel 9 (select models)</td></tr><tr><th>Compatibility – tablets</th><td>iPad Pro with USB-C (2018 and newer), 4th–6th generation iPad Air, 6th generation iPad mini, 11th generation iPad</td></tr><tr><th>Compatibility – laptops</th><td>MacBook Pro, MacBook Air, other laptops with USB-C supporting video output</td></tr><tr><th>Compatibility – consoles</th><td>Nintendo Switch, Nintendo Switch OLED</td></tr><tr><th>Weight</th><td>27 g</td></tr><tr><th>Adapter dimensions</th><td>4.2 x 1.6 x 9 cm</td></tr> </tbody> </table> </div>

The AXAGON ACU-DPQ100 GaN travel wall charger enables fast charging of up to three mobile devices at the same time. With a total power output of 100W, the charger powers notebooks, phones, and other mobile devices at the highest possible speed. The adapter offers a standard USB-A connector as well as two reversible USB-C connectors. Its compact size and high performance are made possible by the new GaN technology used. Components made with Gallium Nitride operate with high efficiency, allowing high performance in a small form factor. The charger is equipped with two Power Delivery 3.0 / Quick Charge 4+ USB Type-C outputs and one Quick Charge 3.0 USB Type-A output, enabling fast charging not only of smartphones and tablets, but also laptops. Quick Charge 4+ technology allows phones to charge up to 4 times faster than with a standard USB charger. Power Delivery 3.0 technology not only supports charging of modern phones, but also enables 100W PD charging for powerful laptops. The charger supports 20W PD charging for iPhone 12, 13, 14 and 15 and also offers 27W PD charging for iPhone 13 Pro, 14 Pro, 15 Pro and their Pro Max models. In addition, it supports 25W SFC charging for Samsung Galaxy S20 - S24, Note and Z Fold series and also offers 45W SFC 2.0 charging for Samsung Galaxy S20 - S24 Ultra, Tab S7+ - S9+, Tab S8 - S9 Ultra. The adapter is also compatible with other fast phone charging standards such as Apple iPhone, iPad, Samsung, Huawei, Honor, and Xiaomi. The main advantage of the power adapter is the Power Delivery 3.0 standard for charging Apple MacBook, Lenovo, Asus, HP, Dell, and other laptops. You can charge your laptop directly or via the increasingly popular docking stations and port replicators. The advanced protection system at the charging adapter output protects the device being charged from damage. The charger also detects the connected device and selects the optimal charging speed and charging process. The body of the power adapter has a pleasant shape and size. Compared to classic charging adapters with the same parameters, this charger is up to half the size. The combination of compact dimensions, achieved with GaN technology, and a wide input voltage range makes the charger an ideal travel companion. Input: input voltage AC 100V-240V / 2A / 50-60 Hz (WIV function) supports multiple national power standards two-pin euro plug - integrated in the body of the charger Outputs: USB-A port QC (phones) max. 30W: 4.5V/5A, 5V/3A, 9V/3A, 12V/2.5A, 20V/1.5A Charging technology: QC 3.0, QC 2.0, AFC, SCP, FCP, PE+, SMART, Apple 2.4A USB-C port PD2 (phones) max. 65W: 5V/3A, 9V/3A, 12V/2.5A, 15V/3A, 20V/3.25A, PPS: 3.3-11V/3A Charging technology: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, SFC 2.0, SFC, AFC, SCP, FCP, PE+, SMART, Apple PD USB-C port PD1 (laptops, phones) max. 100W: 5V/3A, 9V/3A, 12V/2.5A, 15V/3A, 20V/5A, PPS: 3.3-11V/5A Charging technology: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, SFC 2.0, SFC, AFC, SCP, FCP, PE+, SMART, Apple PD Maximum performance when using multiple ports: maximum power QC + PD2 15W, SMART mode charging is used (max. 5V/3A) maximum power QC + PD1 83W maximum power PD1 + PD2 85W maximum power QC + PD1 + PD2 80W total maximum power 100W total maximum current 5A Supported charging technologies: Standard charging of all devices that support 5V and charging of Apple iPhone 5, 6, SE, 7. SMART - charging max. 5V/3A, Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A) and Apple 2.4A (iPad). PE+ - fast charging using the MediaTek Pump Express+ and Pump Express+ 2.0 protocol. FCP - fast charging of devices that support Huawei Fast Charge Protocol. SCP - fast charging (up to 40W) using the Huawei SuperCharge Protocol. AFC - fast charging using the Samsung Adaptive Fast Charging protocol. SFC - fast charging using the Samsung Super Fast Charging and Super Fast Charging 2.0 protocol. QC - fast charging using the Qualcomm Quick Charge 2.0, Quick Charge 3.0 and Quick Charge 4+ protocol. PPS - fast charging using the Programmable Power Supply protocol (part of USB PD 3.0 and QC4+). PD - fast charging using USB Power Delivery 2.0 and Power Delivery 3.0 protocol. Examples of supported phones, tablets and laptops: SFC - fast charging (up to 25W) for Samsung Galaxy S20, S21, S22, S23, S24 series, Note 10, 20 series, Z Fold 2, 3, 4 series. SFC 2.0 - fast charging (up to 45W) for Samsung Galaxy S20, S21, S22, S23, S24 Ultra, Tab S7+, Tab S8+, Tab S9+, Tab S8 Ultra, Tab S9 Ultra. PD - fast charging for Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max phones. PD - fast charging (up to 20W) for Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 14, 14 Plus, 15, 15 Plus phones. PD - fast charging (up to 27W) for Apple iPhone 13 Pro, 13 Pro Max, 14 Pro, 14 Pro Max, 15 Pro, 15 Pro Max phones. PD - fast charging (up to 100W) for Lenovo, HP, Dell, Acer, Asus, Apple MacBook Air, MacBook Pro, iPad mini, iPad Air, iPad Pro and other notebooks. The charger supports WIV, AIC and CC functions: Wide Input Voltage - wide input voltage range function; it protects the adapter against undervoltage and overvoltage at the input and allows the use of more national power standards. Automatic Intelligent Communication - automatic recognition of the connected device to select optimal charging parameters. Constant Output Current - current holding function prevents output power fluctuations; this function ensures a steady charging process. Complex output protection: OCP, OVP, OTP, OSP: Over Current Protection. Protection of the output against current overload. Over Voltage Protection. Protection against overvoltage at the output. Over Temperature Protection. Protection against overheating of the adapter. Output Short Circuit Protection. Short circuit protection at the output. Other features: dimensions of the charger body 115 x 60 x 32 mm including the plug, weight: 242 g, material: non-flammable plastic. Package contains: black wall charger, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Compact AXAGON ACU-DPQ65 GaN travel wall charger for fast charging of up to three mobile devices at the same time. With a total power output of 65W, the charger powers notebooks, phones, and other mobile devices at the highest possible speed. The adapter offers one standard USB-A connector as well as two reversible USB-C connectors. Its ultra-compact size and high performance are made possible by the new GaN technology used. The gallium nitride components operate with high efficiency, allowing high power output in a small form factor. Two Power Delivery 3.0 / Quick Charge 4+ USB Type-C outputs and one Quick Charge 3.0 USB Type-A output enable fast charging of smartphones and tablets, as well as charging of laptops. The charger is compatible with fast charging standards for Apple iPhones, iPads, Samsung, Huawei, Honor, Xiaomi, as well as PD charging for Lenovo, HP, Dell, and other notebooks. Quick Charge 4+ technology allows phones to charge up to 4 times faster than with a standard USB charger. Power Delivery 3.0 technology supports modern phones as well as charging modern laptops. The AIC function recognizes the connected device and automatically selects the optimal charging speed, while the CC function ensures a stable charging process. The WIV function works with a wide range of input voltages, protects the adapter against input undervoltage and overvoltage, and allows the use of multiple national power standards. The advanced protection system at the charger output protects the device being charged from damage. The body of the power adapter has a pleasant shape and size. Compared to classic charging adapters with the same parameters, the charger is one-third to one-half smaller. The combination of compact dimensions, achieved with GaN technology, and a wide range of input voltages makes the charger an ideal travel companion. Charger operation is indicated by an elegant white LED that does not dazzle. Input: input voltage AC 100V-240V / 50-60 Hz (WIV function) supports multiple national power standards two-pin Euro plug - integrated into the charger body Outputs: three outputs 1x USB Type-A port QC (phones): Quick Charge 3.0 - 4.5V/5A, 5V/4.5A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A 1x USB Type-C port PD2 (phones): Power Delivery 3.0 - 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A 1x USB Type-C port PD1 (notebooks, phones): Power Delivery 3.0 - 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A QC port maximum power 30W PD2 port maximum power 33W PD1 port maximum power 65W QC + PD1 maximum power 63W QC + PD2 maximum power 24W PD1 + PD2 maximum power 63W QC + PD1 + PD2 maximum power 60W total maximum power 65W total maximum current 5A Supported charging technologies: USB Type-A port QC (max. 30W): Fast charging QC2.0, QC3.0, AFC, FCP, SCP, PE+, SMART charging max. 5V/4.5A USB Type-C ports PD1 (max. 65W) and PD2 (max. 33W): Fast charging PD 2.0, PD 3.0, QC2.0, QC3.0, QC4+, AFC, FCP, PE+, PSS 3.3-11V/3A, SMART charging max. 5V/3A, Apple fast charging The charger charges devices with the following technologies: Standard charging of all devices that support 5V and charging of Apple iPhone 5, 6, SE, 7. Smart 5V/4.5A Qualcomm Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A), and Apple 2.4A (iPad). QC - fast charging of devices that support Qualcomm Quick Charge 2.0, Quick Charge 3.0, and Quick Charge 4+. AFC - fast charging of devices that support Samsung Adaptive Fast Charging. FCP - fast charging of devices that support Huawei Fast Charge Protocol. SCP - fast charging of devices that support Huawei SuperCharge Protocol. PE+ - fast charging of devices that support MediaTek Pump Express+ and Pump Express+ 2.0. PPS - charging using the Programmable Power Supply protocol (part of USB PD 3.0 and QC4+) 3.3 - 11V / 3A. PD - fast charging of devices that support Power Delivery 2.0 and Power Delivery 3.0. PD - fast charging of Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max phones. PD - fast charging (up to 20W) of Apple iPhone 12 and charging of Apple MacBook, MacBook Pro, iPad Pro, iPad Air. PD - fast charging (up to 65W) of Lenovo, HP, Dell, Apple MacBook, Acer, Asus, etc. notebooks. The charger supports WIV, AIC and CC functions: Wide Input Voltage - a wide input voltage range function; it protects the adapter against input undervoltage and overvoltage and allows the use of more national power standards. Automatic Intelligent Communication - automatic recognition of the connected device to select optimal charging parameters. Constant Output Current - the current hold function prevents output power fluctuations; this function ensures a stable charging process. Complex output protection: OCP, OVP, OTP, OSP: Over Current Protection - protection of the output against current overload. Over Voltage Protection - protection against output overvoltage. Over Temperature Protection - protection against overheating of the adapter. Output Short Circuit Protection - short circuit protection at the output. Other features: charger body dimensions 103 x 36 x 32mm including plug, weight: 118 g, material: non-flammable plastic. Package contains: wall charger, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.

The AXAGON ACU-DPQ65W GaN travel wall charger enables fast charging of up to three mobile devices at the same time. With 65W of total power, the charger charges notebooks, phones and other mobile devices at the highest possible speed. The adapter offers a standard USB-A connector, but also two double-sided USB-C connectors. Compact size and high performance is given by the new GaN technology used. The components used with Galium Nitride work with high efficiency, which allows you to achieve high performance with a small size. The charger is equipped with two Power Delivery 3.0 / Quick Charge 4+ USB Type-C outputs and one Quick Charge 3.0 USB Type-A output, enabling fast charging of not only smartphones and tablets, but also laptops. The Quick Charge 4+ technology allows up to 4 times faster charging of phones than a standard USB charger. Power Delivery 3.0 technology not only supports charging of modern phones, but also enables 65W PD charging of powerful laptops. The charger supports 20W PD charging for iPhone 12, 13, 14 and 15 and also offers 27W PD charging for iPhone 13 Pro, 14 Pro, 15 Pro and their Pro Max models. In addition, it supports 25W SFC charging for Samsung Galaxy S20 - S24, Note and Z Fold series and also offers 45W SFC 2.0 charging for Samsung Galaxy S20 - S24 Ultra, Tab S7+ - S9+, Tab S8 - S9 Ultra. The adapter is also compatible with other fast phone charging standards such as Apple iPhone, iPad, Samsung, Huawei, Honor, Xiaomi, as well as the Power Delivery 3.0 standard for charging Apple MacBook, Lenovo, Asus, HP, Dell and other laptops. The advanced protection system at the charging adapter output protects the device being charged from damage. The charger function also detects the device being charged and selects the optimal charging speed and progress. The body of the power adapter has a pleasant shape and size. Compared to classic charging adapters with the same parameters, the size of this charger is up to half the size. The combination of small dimensions, achieved with GaN technology and a wide range of input voltages, makes the charger an ideal travel helper. The operation of the charger is indicated by an elegant LED. Input: input voltage AC 100V-240V / 1.5A / 50-60 Hz (WIV function) supports multiple national power standards two-pin euro plug - integrated in the body of the charger Outputs: USB-A port QC (phones) max. 30W: 4.5V/5A, 5V/4.5A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A Charging technology: QC 3.0, QC 2.0, AFC, SCP, FCP, PE+, SMART, Apple 2.4A USB-C port PD2 (phones) max. 33W: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A, PPS: 3.3-11V/3A Charging technology: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, SFC, AFC, SCP, FCP, PE+, SMART, Apple PD USB-C port PD1 (laptops, phones) max. 65W:5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A, PPS: 3.3-11V/5A Charging technology: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, SFC 2.0, SFC, AFC, SCP, FCP, PE+, SMART, Apple PD Maximum performance using multiple ports: maximum power QC + PD2 24W, SMART mode charging is used (max. 5V/4.5A) QC + PD1 maximum power 63W PD1 + PD2 maximum power 63W QC + PD1 + PD2 maximum power 60W total maximum power 65W total maximum current 5A Supported charging technologies: Standard charging of all devices that support 5V and Apple iPhone 5, 6, SE, 7 charging. SMART - charging max. 5V/4.5A, Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A) and Apple 2.4A (iPad). PE+ - quick charging using MediaTek Pump Express+ and Pump Express+ 2.0 protocol FCP - quick charging using Huawei Fast Charge Protocol. SCP - quick charging (up to 20W) using Huawei SuperCharge Protocol. AFC - quick charging using Samsung Adaptive Fast Charging protocol. SFC - quick charging using Samsung Super Fast Charging and Super Fast Charging 2.0 protocol. QC - quick charging using Qualcomm Quick Charge 2.0, Quick Charge 3.0 and Quick Charge 4+ protocols. PPS - quick charging using Programmable Power Supply protocol (part of USB PD 3.0 and QC4+). PD - quick charging using USB Power Delivery 2.0 and Power Delivery 3.0 protocol. Examples of supported phones, tablets and laptops: SFC - quick charging (up to 25W) of Samsung Galaxy S20, S21, S22, S23, S24 series, Note 10, 20 series, Z Fold 2, 3, 4 series. SFC 2.0 - quick charging (up to 45W) of Samsung Galaxy S20, S21, S22, S23, S24 Ultra, Tab S7+, Tab S8+, Tab S9+, Tab S8 Ultra, Tab S9 Ultra. PD - quick charging of Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max phone. PD - quick charging (up to 20W) Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 14, 14 Plus, 15, 15 Plus phone. PD - quick charging (up to 27W) Apple iPhone 13 Pro, 13 Pro Max, 14 Pro, 14 Pro Max, 15 Pro, 15 Pro Max phone. PD - quick charging (up to 65W) of Lenovo, HP, Dell, Acer, Asus, Apple MacBook Air, MacBook Pro, iPad mini, iPad Air, iPad Pro and others notebooks. The charger supports WIV, AIC and CC functions: Wide Input Voltage - function of a wide range of input voltage; it protects the adapter against undervoltage and overvoltage at the input and allows the use of more national power standards. Automatic Intelligent Communication - function of automatic recognition of the connected device to select optimal charging parameters. Constant Output Current - the current hold function prevents the output power fluctuations; this function ensures steady course of charging. Complex output protection: OCP, OVP, OTP, OSP: Over Current Protection. Protection of output against current overload. Over Voltage Protection. Protection against overvoltage at the output. Over Temperature Protection. Protection against overheating of the adapter. Output Short Circuit protection. Short circuit protection at the output. Other features: dimensions of the charger body 103 x 36 x 32mm including a plug, weight: 118 g, material: non-flammable plastic. Package contains: white wall charger, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The AXAGON ACU-PQ45 GaN travel wall charger enables fast charging of up to two mobile devices at the same time. With 45W of total power, the charger charges phones, tablets, and other mobile devices at the highest possible speed. The adapter offers a standard USB-A connector as well as a reversible USB-C connector. Its compact size and high performance are thanks to the new GaN technology used. Components made with Gallium Nitride work with high efficiency, enabling high performance in a small form factor. The charger is equipped with Power Delivery 3.0 / Quick Charge 4+ USB Type-C and Quick Charge 3.0 USB Type-A outputs, allowing fast charging of not only smartphones and tablets but also small notebooks with up to 45W power. The charger supports 20W PD charging for iPhone 12, 13, 14, and 15 and also offers 27W PD charging for iPhone 13 Pro, 14 Pro, 15 Pro, and their Pro Max models. In addition, it supports 25W SFC charging for Samsung Galaxy S20 - S24, Note, and Z Fold series and also offers 45W SFC 2.0 charging for Samsung Galaxy S20 - S24 Ultra, Tab S7+ - S9+, Tab S8 - S9 Ultra. The adapter is also compatible with other fast phone charging standards such as Apple iPhone, iPad, Samsung, Huawei, Honor, Xiaomi, as well as the Power Delivery 3.0 standard for charging Apple MacBook Air laptops and other ultrabooks. An advanced protection system at the charging adapter output protects the device being charged from damage. The charger function also detects the device being charged and selects the optimal charging speed and progress. When two devices are charged simultaneously, intelligent power distribution is activated. The body of the power adapter has a pleasant shape and size. Compared to classic charging adapters with the same parameters, the size of this charger is up to half as small. The combination of small dimensions achieved with GaN technology and a wide range of input voltages makes the charger an ideal travel companion. Input: input voltage AC 100V-240V / 1.2A / 50-60 Hz (WIV function) supports multiple national power standards two-pin euro plug - integrated into the body of the charger Outputs: USB-A port QC (phones) max. 20W: 5V/3A, 9V/2A, 10V/2A, 12V/1.5A Charging technology: QC 3.0, QC 2.0, AFC, SCP, FCP, PE+, SMART, Apple 2.4A USB-C port PD (tablets, phones) max. 45W: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.25A, PPS: 3.3-16V/3A Charging technology: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, SFC 2.0, SFC, AFC, SCP, FCP, PE+, SMART, Apple PD Maximum performance using multiple ports: maximum power QC + PD 45W total maximum power 45W total maximum current 3A Supported charging technologies: Standard charging of all devices that support 5V and Apple iPhone 5, 6, SE, 7 charging. SMART - charging max. 5V/3A, Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A), and Apple 2.4A (iPad). PE+ - quick charging using MediaTek Pump Express+ and Pump Express+ 2.0 protocols FCP - quick charging using Huawei Fast Charge Protocol. SCP - quick charging (up to 20W) using Huawei SuperCharge Protocol. AFC - quick charging using Samsung Adaptive Fast Charging protocol. SFC - quick charging using Samsung Super Fast Charging and Super Fast Charging 2.0 protocol. QC - quick charging using Qualcomm Quick Charge 2.0, 3.0, and 4+ protocols. PPS - quick charging using Programmable Power Supply protocol (part of USB PD 3.0 and QC4+). PD - quick charging using USB Power Delivery 2.0 and 3.0 protocols. Examples of supported phones, tablets, and ultrabooks: SFC - quick charging (up to 25W) of Samsung Galaxy S20, S21, S22, S23, S24 series, Note 10, 20 series, Z Fold 2, 3, 4 series. SFC 2.0 - quick charging (up to 45W) of Samsung Galaxy S20, S21, S22, S23, S24 Ultra, Tab S7+, Tab S8+, Tab S9+, Tab S8 Ultra, Tab S9 Ultra. PD - quick charging of Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max phones. PD - quick charging (up to 20W) Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 14, 14 Plus, 15, 15 Plus phones. PD - quick charging (up to 27W) Apple iPhone 13 Pro, 13 Pro Max, 14 Pro, 14 Pro Max, 15 Pro, 15 Pro Max phones. PD - quick charging (up to 45W) Apple iPad mini, iPad Air, iPad Pro, MacBook Air, and other ultrabooks. The charger supports WIV, AIC, CC, IPD functions: Wide Input Voltage - function for a wide range of input voltage; protects the adapter against undervoltage and overvoltage at the input and allows the use of more national power standards. Automatic Intelligent Communication - automatic recognition of the connected device to select optimal charging parameters. Constant output Current - maintains current at the output to prevent power fluctuations; ensures steady charging. Intelligent power distribution - when devices with different power requirements are connected, charging power is intelligently distributed between both ports. Complex output protection: OCP, OVP, OTP, OSP: Over Current Protection. Protects the output against current overload. Over Voltage Protection. Protects against overvoltage at the output. Over Temperature Protection. Protects the adapter from overheating. Output Short Circuit protection. Short circuit protection at the output. Other features: dimensions of the charger body: 89 x 52 x 36 mm including plug, weight: 85 g, material: non-flammable plastic. Package contains: black wall charger, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

SuperSpeed USB-C 5Gbps docking / cloning station AXAGON ADSA-DC DUAL CLONE easily and quickly connects up to two 2.5" or 3.5" drives to the computer at the same time. The connection to the computer is enabled by the modern double-sided USB-C connector on the dock together with the supplied USB-C USB-A cable with a length of 80 cm. This handy helper will allow you easiest connection of any 2.5/3.5" SATA drive to computer or notebook. Just insert one or even two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux...). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5Gbit/s. Connection via USB-C female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, Supports 2.5" HDD/ SSD Supports 3.5" HDD. Max. disk capacity all without limitation. Max. 2.5" disk height - all without limitation. Features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2) and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transmission in Windows 8 and later. TRIM support to reduce the gradual degradation of SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. HDD/SSD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spin down - shutdown of disks when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB-C female connector. USB-C USB-A cable 80 cm long is included. LED indicating HDD/SSD dock power and disk activity in both shafts. Station dimensions 73 x 130 x 97 mm. Weight 307 g. Power: Power supply using the included external AC/DC adapter 12V - 3A with 150 cm long cable. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDDs and SSDs can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported OS: Windows, macOS, Linux, Chrome OS. Package contains: HDD/SSD dock, USB-C USB-A cable 80 cm long, power adapter 100-240V / 12V-2.5A, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

The compact AXAGON ADSA-1S SLIMport3 adapter with USB 2.0 interface for easy connection to a 2.5" SATA disk. A handy tool to quickly connect a laptop disk, including boot support. Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports spindown of connected disks. The installation can be handled even by a layman - the disk connects to the adapter and the adapter to the computer's USB port; the rest is done automatically. Minimum dimensions and weight, along with an enclosed disc case, make the product ideally suited even for mobile use. Features: Fully compatible with USB 2.0 and backward compatible with USB 1.1. Supports transmission rates 12 / 480 Mbit/s (full / high speed). Supports 2.5" SATA III / II / I disks of all capacities. Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB 2.0 interface used (theor. 480 Mbit/s). Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown support - possibility to set the interval for disk spindown when idle. HDD Auto Stop - the disk turns off after your PC spins down. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via direct USB Type A male connector on a 20 cm long cable that is permanently connected to the adapter. Power supply via USB bus. A blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Compact adapter dimensions 70 x 21 x 11 mm. Adapter weight of only 17 g, including a 20 cm USB cable. Simple plastic case holds 2.5" disk max. 9.5 mm high with USB adapter connected (USB cable is led out through hole in the case). For thin 7mm SSDs/HDDs foam pads are included for better fit in the case. The case can also serve to transport or store the adapter itself without the disk, with the USB cable inside the case. Case dimensions 122 x 78 x 19 mm. Case weight 40 g. Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB - SATA adapter with permanently connected 20 cm long cable, plastic case for 2.5" disk and USB adapter, foam pads for 7 mm HDDs and SSDs, printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

SuperSpeed USB 5 Gbps docking / cloning station AXAGON ADSA-D25 CLONE MINI quickly and easily connects up to two 2.5" disks to your computer at the same time. The USB Micro-B connector on the dock and included USB Micro-B USB-A cable enables a connection to computer. This compact helper will allow you easiest connection of any 2.5" SATA drive to computer or notebook. Just insert one or two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB 5 Gbps. Speed up to 5 Gbit/s. Connection via USB Micro-B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface. Supports 2.5" SSD/HDD. Max. disk capacity all without limitation. Max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB Micro-B female connector. USB Micro-B USB-A cable 60 cm long is included. LED indicating SSD/HDD dock power and disk activity in both shafts. Station dimensions 89 x 58 x 59 mm. Weight 137 g. Power: Power cable USB-A 3.5/1.3 mm DC 5V length 1 m is included in the package. The cable allows powering the station from the computer USB-A port or a standard mobile phone charger with a USB-A output of 5V / min. 1A, e.g. AXAGON ACU-DS16. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDD and SSD can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported operating systems: MS Windows 7 / 8 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SSD/HDD dock, USB Micro-B USB-A cable 60 cm long, power cable 100 cm, printed installation manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Multiport USB-C 3.2 Gen 1 hub AXAGON HMC-HCR3A expands your laptop, computer or phone with four ports and SD / microSD card reader. Through the double-sided USB-C connector, you can easily and quickly connect three USB devices, memory cards and an HDMI display to the computer at the same time. The USB-C hub will provide you with a simple and compact 5in1 docking station for notebook. The USB hub offers three USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. Popular gaming resolution WQHD 2560 x 1440px at 60Hz or FullHD 1920 x 1080px at 60, 100 and 120Hz max. are also supported. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Card reader supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. High data transfer speed ensured by USB 3.2 Gen 1 interface. The card reader enables simultaneous handling of cards in both slots and direct copying between them. Elegant aluminum body ensures mechanical resistance and quality cooling. The finely structured surface with no fingerprint remains will also please you. Port replicator is an ideal accessory for laptops without USB-A connectors, card reader and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. You can connect a flash drive, keyboard, mouse, monitor, TV or projector to your phone. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Compatible with Thunderbolt 3. Connecting USB type C male connector on a fixed 20 cm long cable. USB outputs: 3x SuperSpeed USB port, USB-A female connector. Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit/s). USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A in each of the hub's USB ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port). HDMI output: HDMI. HDMI A (F) female connector. Maximum supported resolution 4K / 4096 x 2160 at 30 Hz. WQHD resolution 2560 x 1440 at 60 Hz max. FullHD resolution 1920 x 1080 at 60, 100, 120 Hz max. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Correct OS is also necessary. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Support up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio formats. Support sampling rate up to 192kHz and up to 24-bit audio depends on source and end device, i.e. laptop/phone and TV/monitor/ AV receiver. The card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash, SD slot: Digital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB), MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus (USB bus power). Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings. White LED indicates the connection to the computer's USB port. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions 110 x 35 x 12.5 mm. Weight 58 g (incl. cable). USB cable length 20 cm. Supported operating systems: Microsoft Windows 10, 11, Mac OS, Linux, Android and Chrome OS. Compatibility depends on used OS and support from device manufacturer. Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed. Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Package contains: USB-C hub with fixed 20 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.

Ribbed aluminum external AXAGON EE25-GTR RIBBED box with USB 3.2 Gen2 interface for 2.5 SATA HDD or SSD. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-A cable and USB-A -> USB-C adapter enables a reliable connection to a computer. Thanks to the fast USB 3.2 Gen 2 interface with a transfer speed of up to 10 Gb/s, the speed of 2.5" SSD disks is not limited. Compared to conventional boxes with a USB 3.2 Gen 1 interface, the transfer speed of this box with SSD disk is about 20% higher. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the external drive. Hibernation support for connected disk and box. The inner box frame fixes well and protects the inserted disk. The ribbed aluminum box body helps cool and protect the drive. Rubber feet restrict movement on the table. The elegant box surface prevents unwanted fingerprints. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps. Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" SSD/HDD, max. disk capacity - all without restriction, max. 2.5" disk height 9.5 mm. Other features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), backward compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports transmission rates 10 000 / 5 000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the SATA interface used (theor. 6 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or sleeping the PC. Connection via USB 3.2 Gen 2 type C female connector. USB Type C male / USB Type A male cable 60 cm long is included. USB-A - USB-C adapter is included. A decent LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking). Box dimensions 114 x 77 x 16 mm. Weight 100 g. Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and later, Linux with kernel 2.6.x and later. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB-C 3.2 Gen 2 external box for 2.5" SATA disk, USB-C - USB-A cable 60 cm long, USB-A - USB-C adapter, self-adhesive rubber pads, mounting material and screwdriver, multilanguage quick guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Ribbed aluminum external AXAGON EE35-GTR RIBBED box with USB 3.2 Gen 1 (USB 3.0) interface for 3.5 SATA HDD. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-A cable and USB-A -> USB-C adapter enables a reliable connection to a computer. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gbps. SATA 6G interface with UASP support allows you to enjoy the speed of modern disks. Reading S.M.A.R.T. information monitoring the condition of the external drive. Hibernation support for connected disk and box. The inner box frame fixes well and protects the inserted disk. The ribbed aluminum box body helps cool and protect the drive. Rubber feet restrict movement on the table. The elegant box surface prevents unwanted fingerprints. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB. Speed up to 5 Gbit/s. Connection via reversible USB type C female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, Supports 3.5" HDD, max. disk capacity - all without restriction, Other features: Compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible USB 2.0. Supports transmission rates 5 000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or sleeping the PC. Connection via USB 3.2 Gen 1 type C female connector. USB-C / USB-A male cable 80 cm long is included. USB-A - USB-C adapter is included. A decent LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking). Box dimensions 174 x 113 x 33 mm. Weight 300 g. Power supply: Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. On/Off button on the rear panel of the box. AC adapter dimensions 81 x 44 x 68 mm (incl. plug). AC adapter weight 103 g (incl. supply cable). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and later, Linux with kernel 2.6.x and later.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB-C 3.2 Gen 1 external box for 3.5" SATA disk, USB-C - USB-A cable 80 cm long, USB-A - USB-C adapter, power adapter 100-240V / 12V-2A, self-adhesive rubber pads, mounting material and screwdriver, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Fast external AXAGON EEM2-20G ARMORED box with USB 20Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find a USB-C -> USB-C cable to connect the box to your computer. Thanks to the USB 20Gbps interface, the transmission rate is up to 20 Gb/s. To take full advantage of the speed of the box, the controller of the connected device must be compatible with USB 3.2 Gen 2x2. These controllers are typically used in gaming laptops and modern desktop computers. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage of the box is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. Vents on the sides ensure sufficient air circulation. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. Another benefit is the silicone sleeve, which provides better protection of the box against shocks, prevents sliding on the table and ensures a comfortable grip in the hand. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 20Gbps (USB 3.2 Gen 2x2), connector USB-C female. Compatible with USB 5Gbps, USB 10Gbps. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Maximum theoretical supported speeds and compatibility with USB controllers (ports): Laptop / PC with USB 20Gbps (USB 3.2 Gen 2x2) port: max. speed 20 Gbit/s. Laptop / PC with USB 10Gbps (USB 3.2 Gen 2) port: max. speed 10 Gbit/s. Laptop / PC with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0) port: max. speed 5 Gbit/s. Compatible with USB4, Thunderbolt 3/4 ports: max. speed 10 Gbit/s. The real box bandwidth / transmission rate is about 2000 MB/s (2 GB/s), it is given by the limits of the USB 3.2 Gen 2x2 interface. Other features: Supports transmission rates 20.000 / 10.000 / 5.000 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2x2 type C female connector. USB type C male / USB type C male cable length 38 cm in the package. Other data: Box dimensions 15 x 112 x 40 mm (H x W x D). Box weight 83 g (without cable, without disk, without sleeve). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 20Gbps external box for M.2 SSD, silicone sleeve, USB-C USB-C cable 38 cm long, 1 thermal conductive pad, mounting kit and screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Fast external box AXAGON EEM2-20GD CLONE MASTER with USB 20Gbps interface. The box works not only as an external storage for two M.2 NVMe SSD disks simultaneously, but also as a docking station that allows easy cloning of M.2 disks without using a computer. The double-sided USB-C connector enables a reliable connection. The package includes USB-C -> USB-C cable for connecting the box to a computer. With this external box, you can easily clone NVMe disks at speeds up to 20 Gb/s. Insert the source M.2 disk into the first slot (Slot A) and the target M.2 disk into the second slot (Slot B). Then hold the cloning button, confirm cloning by pressing it, and monitor the progress on the scale with four LED indicators. After completion, an exact copy of the original is created on the target disk. The box can also be used as a standalone device for convenient disk duplication and disk imaging. It is the simplest way to transfer content from one SSD to another, including a fully functional operating system (Windows, macOS, Linux). The box design allows both inserted NVMe M.2 disks to be connected to a notebook using a single cable. They appear in the system as two separate disks that can be used independently or simultaneously. When using two disks, the box design allows setting up a software RAID for higher data protection in Windows and macOS. To configure this protection, use Storage Spaces in Windows or the RAID Assistant in Disk Utility in macOS. To achieve maximum transfer speed, the controller of the connected device must support USB 20Gbps. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. After a longer period of inactivity, the box switches to power-saving mode. Another advantage is that it supports both single-sided and double-sided M.2 SSDs in three lengths (42, 60 and 80 mm). SSD capacity is not limited. A mechanical lock on the front panel protects against accidental opening. After sliding the lock to the unlocked position, press the front panel and the inner module will automatically slide out. This allows easy and fast disk replacement and convenient use for data migration or testing. The aluminum box body together with thermal conductive pads dissipates heat from the inserted M.2 SSDs. Cooling is supported by an active fan that continuously circulates air inside the device. This maintains optimal operating temperature during long-term load (e.g. cloning or large data transfers). The risk of overheating and performance throttling due to Thermal Throttling is minimized. This stabilizes performance and extends SSD lifespan. By inserting an M.2 SSD, you can easily create a fast and universal 2in1 external disk. The box can be used with computers, laptops, mobile phones and tablets. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. SSD cloning speed up to 2000 MB/s. Total cloning time depends on the speed of the disks used and the capacity of the source disk, not on the amount of data stored. Maximum theoretical supported speeds and compatibility with USB controllers (ports): Laptop / PC with USB 20Gbps (USB 3.2 Gen 2x2) port: max. speed 20 Gbit/s. Laptop / PC with USB 10Gbps (USB 3.2 Gen 2) port: max. speed 10 Gbit/s. Laptop / PC with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0) port: max. speed 5 Gbit/s. Compatibility with USB 40Gbps, Thunderbolt 3/4/5 ports: max. speed 1020 Gbit/s depending on CPU and chipset. The real box bandwidth / transmission rate is about 2000 MB/s (2 GB/s), it is given by the limits of the USB 3.2 Gen 2x2 interface. Other features: Supports transmission rates 20.000 / 10.000 / 5.000 Mbit/s. Support of M key or B+M key NVMe (PCI Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.4 specification. Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900 mA from one USB port is sufficient in all cases. Heavy-duty aluminium body and thermal conductive pads, helps to better cooling the M.2 SSD disk. Active cooling with integrated fan. Mechanical lock of the inner module on the front panel. Higher box surface temperature is not a defect thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2x2 type C female connector. USB type C male / USB type C male cable length 30 cm in the package. Compatible with Windows software RAID (Storage Spaces) and macOS RAID (Disk Utility RAID Assistant).

Gaming external AXAGON EEM2-GAM M.2 box with USB 10Gbps interface for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find two cables to connect the box to your computer. One USB-C USB-C and the other USB-C USB-A. You can connect the box to any free USB port on the notebook. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. A great advantage is the screwless opening of the box. Just press the button on the side to release the bottom cover. Changing discs is so easy and fast. The stylish frame for M.2 drives will impress you with its premium gaming design in black with an elegant surface that will perfectly highlight your gaming setup. The RGB LED indication adds a stylish look and blends perfectly with any gaming laptop, further enhancing the atmosphere of your gaming environment. Also included is a functional sleeve that protects the box opening button, increases overall protection, and offers a loop for hanging. Aluminum box body and thermal conductive pad provides ideal cooling for the inserted M.2 SSD. This extends the life of the disk and prevents slowing down of the disk speed, so called. Thermal Throttling. Inserting an M.2 SSD into this box easily creates a fast, compact and versatile external drive that can be used not only with PCs and laptops, but also with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with 480Mbps, USB 5Gbps, USB4 a Thunderbolt 3/4. Device support: NVMe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. RGB LED indication. Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Two USB type C or A male / USB type C male cable length 50 cm included in the package. Other data: Box dimensions 13 x 130 x 55 mm (H x W x D). Box weight 105 g (without cable and M.2 disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility is dependent on an updated operating system and support from the device manufacturer. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, protective sleeve, USB-C - USB-C cable 50 cm long, USB-A - USB-C cable 50 cm long, 2 thermal conductive pads, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA packed in a cardboard box with a hanging hole.

Superfast external AXAGON EEM2-GTR THIN RIB box with USB 3.2 Gen 2 interface is designed for NVMe (PCI-Express) M.2 SSD disks. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-C cable enables a reliable connection to a computer. Ribbed body design and thermal conductive pads provides great M.2 SSD disk cooling. This extends its service life and also prevents the disk from slowing down, so-called "Thermal Throttling". Robust box body also protect the disk. SuperSpeed USB 10 Gbit/s interface allows you to enjoy the speed of modern M.2 SSD drives. Due the fast USB 3.2 Gen 2 interface the transmission speed is up to 10Gb/s. NVMe M.2 SSD disk up to 22x80 mm can be used in the external box. The box has no SSD disk capacity limitation. M.2 cards can be single-sided or double-sided. Inserting M.2 SSD disk into this box you will create a fast and compact external drive. The box can be used with computers and laptops, as well as with mobile phones and tablets. Input: USB 3.2 Gen 2 / SuperSpeed+ USB speed up to 10 Gbit/s. Connection via reversible USB type C female connector. Device support: NVMe (PCI-Express) M.2 SSD disks, designed for M-key or B+M-key card formats, NGFF 75-pin M-key slot for NVMe M.2 disks. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.1 Gen1 / USB 3.0 and USB 2.0. Supports transmission rates 10.000 / 5000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Supports M-key or B+M-key NVMe (PCI-Express) M.2 SSD disks without maximum capacity limitation. Supports M.2 drives with a size of 2230, 2242, 2260, 2280 mm. Supports one-sided and double-sided M.2 SSD disks. Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 Specification. Compliant with USB Mass Storage Class Specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is around 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support after 5 minutes of inactivity. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. A blue LED indicating the connection to the USB port (permanent light) and data transmission (blinking). Aluminum ribbed body and thermal conductive pads helps M.2 SSD disk cooling. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Box connected via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 20 cm in the package. Other data: External box dimensions 106 x 43 x 14 mm. External box weight 68 g (without USB cable and M.2 SSD disk). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher, Android (OS and device support required). Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 3.2 Gen 2 external box for NVMe M.2 SSD, USB-C USB-C cable 20 cm long, 2 thermal conductive pads, mounting kit and screwdriver, multilanguage quick guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.

Universal external AXAGON EEM2-GTS2 THIN SCREWLESS box with USB 10Gbps interface for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. The package includes not only a USB-C -> USB-C cable for connecting the box to a computer, but also a USB-C -> USB-A adapter. You can connect the box to any free USB port on the notebook. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Screwless box opening facilitates assembly and disassembly of the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in grey color with an elegant finish, that prevents unwanted fingerprints. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 3.2 Gen 1, USB4 a Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Supports M.2 drives with a size of 2230, 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminum body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable 50 cm long and USB type C female / USB type A male adapter are included. Other data: Box dimensions 112 x 40 x 14 mm. Box weight 48 g (without cable and M.2 SSD disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility is dependent on an updated operating system and support from the device manufacturer. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, USB-C - USB-C cable, 50 cm long with USB-C - USB-A adapter, 1 thermal conductive pad, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The external AXAGON EEM2-SD2 DISPLAY box with a USB 10Gbps interface is designed for M.2 NVMe or SATA SSD drives. Reliable connection to a computer is ensured by a reversible USB-C connector on the box. The package includes not only a USB-C -> USB-C cable for connecting the box to a computer, but also a USB-C -> USB-A adapter. This way, you can connect the box to any available USB port on your notebook. The box is equipped with an advanced LED display that provides an instant overview of your drive's status. It offers several display modes, including detection of the connected drive, the file system used, temperature, drive health, data transfer speed, and operating hours. A detailed graph allows real-time monitoring of the drives temperature, while the sleep mode saves power when idle. With this intelligent monitoring, you will always have your drive under control simply, clearly, and efficiently. Thanks to the USB 3.2 Gen 2 interface, the transfer speed is up to 10 Gb/s. The external M.2 box also supports other modern features such as UASP, TRIM, and allows reading of S.M.A.R.T. information monitoring the condition of the drive. A unique feature, thanks to the used chipset, is the possibility to use both M.2 NVMe and SATA drives. You dont have to think about which type of M.2 drive to insert into the box. The box allows mounting of SSD cards in three different lengths 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided, and the box does not limit the capacity of the inserted SSD drive. Screwless box opening makes installation and removal of the M.2 SSD drive easier. Drive replacement is quick and simple, expanding the possible uses of the box, e.g., for data migration, testing, etc. The external metal casing is finished in gray with an elegant surface that prevents unwanted fingerprints. The aluminum body of the box and the thermal pad ensure ideal cooling of the inserted M.2 SSD drive. This extends its lifespan and also prevents speed throttling, known as Thermal Throttling. By inserting an M.2 SSD drive into this box, you can easily create a fast, compact, and universal external drive that can be used not only with computers and notebooks but also with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), USB-C female connector. Compatible with USB 5Gbps, USB 20Gbps, USB4, and Thunderbolt 3/4/5. Supported Devices: NVMe M.2 SSDs, SATA M.2 SSDs, designed for M key and B+M key card formats, NGFF 75-pin M key slot for M.2 drives. LED display shows: Recognizing - disk recognition (displayed when the box is connected to a device) Partition - displays the file system, size, and system name of the disk Idle - inactivity (information about the disk - used interface and disk size, speed of the connected bus, partitioning standard of the disk) Disk info - displays information about the disk (manufacturer label of the disk, actual disk temperature, health, amount of written / read data, total running time of the disk, number of disk removals without using safe removal) Monitor real-time disk temperature using a graph Rd/Wr - data transfer (during data transfer, it is possible to switch between sections) Sleep - disk sleep mode Other Features: Supports transfer speeds of 10.000 / 5.000 / 480 Mbit/s. Supports M key or B+M key NVMe (PCIe-Express) and SATA (AHCI) M.2 SSDs with no capacity limit. Supports M.2 drives sizes 2242, 2260, 2280 mm. Supports single- and double-sided M.2 SSDs. Complies with PCIe Base Specification Revision 3.1a specification. Complies with NVM Express 1.3 specification. Complies with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Complies with USB Mass Storage Class specification. The total box bandwidth / transmission rate is determined by the USB interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster transfers in Windows 8 and above. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support. Power supply via USB bus up to 900 mA is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB and data transmission (permanent light). Durable aluminum body and thermal pad improve M.2 SSD cooling. Higher surface temperature is not a defect thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable 25 cm long and USB type C female / USB type A male adapter are included.

The external AXAGON EEM2-SD2B DISPLAY enclosure with a USB 10Gbps interface is designed for M.2 NVMe or SATA SSD drives. Reliable connection to a computer is ensured by a reversible USB-C connector on the box. The package includes not only a USB-C -> USB-C cable for connecting the enclosure to a computer, but also a USB-C -> USB-A adapter. This way, you can connect the box to any available USB port on your notebook. The box is equipped with an advanced LED display that provides an instant overview of your drive's status. It offers several display modes, including detection of the connected drive, the file system used, temperature, drive health, data transfer speed, and operating hours. A detailed graph allows real-time monitoring of the drive's temperature, while the sleep mode saves power when idle. With this intelligent monitoring, you will always have your drive under control - simply, clearly, and efficiently. Thanks to the USB 3.2 Gen 2 interface, the transfer speed is up to 10 Gb/s. The external M.2 box also supports other modern features such as UASP, TRIM, and allows reading of S.M.A.R.T. information monitoring the condition of the drive. A unique feature, thanks to the used chipset, is the possibility to use both M.2 NVMe and SATA drives. You don't have to think about which type of M.2 drive to insert into the box. The box allows mounting of SSD cards in three different lengths - 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided, and the enclosure does not limit the capacity of the inserted SSD drive. Screwless box opening makes installation and removal of the M.2 SSD drive easier. Drive replacement is quick and simple, expanding the possible uses of the box, e.g., for data migration, testing, etc. The external metal casing is finished in black with an elegant surface that prevents unwanted fingerprints. The aluminum body of the box and the thermal pad ensure ideal cooling of the inserted M.2 SSD drive. This extends its lifespan and also prevents speed throttling, known as Thermal Throttling. By inserting an M.2 SSD drive into this box, you can easily create a fast, compact, and universal external drive that can be used not only with computers and notebooks but also with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), USB-C female connector. Compatible with USB 5Gbps, USB 20Gbps, USB4, and Thunderbolt 3/4/5. Supported Devices: NVMe M.2 SSDs, SATA M.2 SSDs, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. LED display shows: Recognizing - disk recognition (displayed when the box is connected to a device) Partition - displays the file system, size, and system name of the disk Idle - inactivity (information about the disk - used interface and disk size, speed of the connected bus, partitioning standard of the disk) Disk info - displays information about the disk (manufacturer label of the disk, actual disk temperature, health, amount of written / read data, total running time of the disk, number of disk removals without using safe removal) Monitor - real-time disk temperature using a graph Rd/Wr - data transfer (during data transfer, it is possible to switch between sections) Sleep - disk sleep mode

Universal external AXAGON EEM2-SG2 RAW box with USB 3.2 Gen 2 interface is designed for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. The package includes not only a USB-C -> USB-A cable for connecting the box to a computer, but also a USB-A -> USB-C adapter. You can connect the box to any free USB port on the notebook. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern functions, e.g. UASP, TRIM and allows reading S.M.A.R.T. information that monitors the status of the disk. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of three different lengths of SSD cards - 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Screwless box opening facilitates assembly and disassembly of the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in titanium silver colour with an elegant brushed finish that prevents unwanted fingerprints. The rounded box design promises pleasant use. The aluminum box body, cooling holes and thermal conductive pad provides very good cooling of the inserted M.2 SSD disk. This extends its service life and also prevents the disk from slowing down, so-called "Thermal Throttling". By inserting the M.2 SSD in the box, you will easily create fast compact external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps. Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key and B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports transmission rates 10 000 / 5 000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - Drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body, cooling holes and thermal conductive pad helps to cool the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB Type C male / USB Type A male cable 20 cm long and USB type A female / USB type C male adapter are included. Other data: External box dimensions 94 x 41 x 10 mm. External box weight 35 g (without USB cable and M.2 SSD disk). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher, Android (OS and device support required). Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 3.2 Gen 2 combined external box for SATA M.2 SSD, USB type C - type A cable 20 cm long, USB-A - USB-C adapter, 1 thermal conductive pad, mounting material, multilanguage quick guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Fast external AXAGON EEM2-UB2 ARROW enclosure with a USB 10Gbps interface for M.2 NVMe SSDs. The reversible USB-C connector on the enclosure ensures a reliable connection. The package includes a USB-C to USB-C cable for connecting the enclosure to your computer. The transfer rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 enclosure also supports other modern features, such as UASP, TRIM, and allows reading S.M.A.R.T. disk status monitoring information. Supports standby mode when idle. An advantage is support for three different SSD lengths - 42, 60, and 80 mm. M.2 drives can be single-sided or double-sided. The enclosure does not limit the capacity of the installed SSD. Opening the enclosure with just one screw makes mounting and removing the M.2 SSD easy. Drive replacement is quick and simple, expanding the enclosure's range of uses, e.g. for data migration, testing, etc. The outer metal housing comes in black with an elegant finish that prevents unwanted fingerprints. The aluminum enclosure body and thermal conductive pad provide very good cooling for the M.2 SSD. This extends its service life and also prevents the drive from slowing down, known as Thermal Throttling. By inserting an M.2 SSD into the enclosure, you can easily create a fast, compact and universal external drive. The enclosure can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), USB-C female connector. Compatible with USB 3.2 Gen 1, USB4, and Thunderbolt 3/4. Device support: NVMe M.2 SSD drives, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transfer rates of 10.000 / 5000 / 480 Mbit/s. Supports M key or B+M key NVMe (PCI-Express) M.2 SSD drives with no maximum capacity limit. Supports M.2 drives in sizes 2242, 2260, 2280 mm. Supports both single-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 specification. Compliant with USB Mass Storage Class specification. The total bandwidth / transfer rate of the adapter is determined by the USB interface used (theoretical 10 Gbit/s). The actual adapter bandwidth / transfer rate is about 1.000 MB/s (1 GB/s), limited by the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transfer in Windows 8 and later. Supports TRIM functionality to limit the gradual degradation of SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring of drive condition. Supports booting from an SSD in the external enclosure. Allows device connection while running thanks to Hot Plug support. Full Plug and Play support. Standby support - the drive goes to sleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A subtle blue LED indicates connection to the computer's USB port (steady light) and data transfer (blinking). The robust aluminum body and thermal conductive pad help cool the M.2 SSD more effectively. A higher enclosure surface temperature is not a defect - thanks to the aluminum body, heat generated during drive operation is dissipated better and transferred to the surroundings. Connection via USB 3.2 Gen 2 Type-C female connector. USB Type-C male / USB Type-C male cable, length 20 cm, included in the package. Other data: Enclosure dimensions 115 x 39 x 11 mm. Enclosure weight 43 g (without cable and M.2 SSD drive). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS, and Android. Compatibility depends on operating system support and device manufacturer support. Note: when using Windows 7, it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external enclosure for M.2 SSD, USB-C - USB-C cable, 20 cm long, 3 thermal conductive pads, mounting accessories and a screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Super fast external box AXAGON EEM2-UG2 with USB 3.2 Gen 2 interface is designed for NVMe (PCI-Express) M.2 SSD disks. Latest USB interface allows you to enjoy the speed of modern M.2 SSD drives. Due the fast USB 3.2 Gen 2 interface is the transmission Speed up to 10Gb/s. Convenient connection allows reversible USB-C connector. The external M.2 box also supports other modern functions, e.g. TRIM. In the external box, NVMe M.2 SSD disks with a size up to 22x80 mm can be mounted. The box is not limited by capacity of SSD disks. M.2 cards may be one-sided or double-sided. The aluminum body of the box and the heat-conductive pads ensure very good cooling of the inserted M.2 SSD. Insert the M.2 SSD disk into this box and you can easily form a fast and compact external disk. The Box can be used with both computers and laptops, so with mobile phones and tablets with the OTG supporting function. Input: USB 3.2 Gen 2 / SuperSpeed+ USB rate of up to 10 Gbit/s. Connection via reversible USB type C female connector. Device support: NVMe M.2SSD disks, designed for M-key or B+M-key card formats, NGFF 75-pin M-key slot for NVMe M.2 drives. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.1 Gen 1 / USB 3.0. and USB 2.0. Supports transmission rates 10.000 / 5000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Support of M-key or B+M-key NVMe (PCI-Express) M.2 SSD disks without maximum capacity limitation. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a Compliant with NVM Express 1.3 Specifikation. Compliant with USB Mass Storage Class Specifikation. The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real bandwidth / transmission rate of the box is around 1000 MB/s (1 GB/s) is given by the limits of the USB 3.2 Gen 2 interface. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Support of TRIM functionality to limit gradual degradation of the SSD performance over time. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby Support - Drive asleep after 5 minutes of inactivity. Supplying the power via USB bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and the cooling pads helps to better cool the M.2 SSD. Higher surface temperature of the box is not a problem - thanks to the aluminum body, the heat generated by the operation of the disc is better dissipated and transferred to the surroundings. Connection via USB 3.2 Gen 2 Type-C female connector. USB Type-C male / USB Type-C male cable 22 cm long is included. Other data: External box dimensions 115 x 39 x 11 mm. External box weight 43 g (without USB cable and M.2 SSD disk). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher, Android (OS and device support required). Note: When operating under Windows 7, contact the manufacturer of the M.2 SSD to find whether this OS is supported. Package contains: USB-C 3.2 Gen 2 external box for NVMe M.2 SSD, USB type C type C cable 22 cm long, 3 thermally conductive pads, mounting material and a screwdriver, printed installation manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with clearly indicated parameters.

Metal USB 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMA-CR3A connects up to three USB devices to laptop or computer and also adds SD / microSD card reader. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This compact multiport hub also handles the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface is transfer speed up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. Card reader supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. High data transfer speed ensured by USB 3.2 Gen 1 interface. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The USB multi-port hub is the ideal accessory for ultrabooks with a small number of USB-A ports and missing card reader. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard, mouse and card reader to your phone or tablet. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 20 cm long cable. Output: 3x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. Card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash, SD slot: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0 / 1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x / 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Support for SD 3.01 and SD Jukebox applications (CPRM functions). Ultra High Speed UHS-I support (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - in file managers, the reader is indicated as two disk drives. FAT 12 / 16 / 32, NTFS, exFAT (FAT 64) file formats support. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 84 x 24 x 18 mm. Weight 42 g (incl. cable). USB cable length 20 cm. Power / Charging: USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. The USB hub can also handle the permanent connection of several external drives simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB multi port hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The multi-port USB-C 5Gbps AXAGON HMC-10HLS LONGER hub 9in1 expands your laptop, computer or phone with nine ports. You can easily and quickly connect a monitor, four USB devices, Gigabit Ethernet network and an SD card reader to your computer via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will thus provide you with a simple and compact 9in1 docking station not only for Windows laptops but also for Apple laptops such as MacBook Air or MacBook Pro. The USB hub offers four 5 Gbps USB outputs with standard USB-A connectors. The hub can also handle permanent connection of three external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub can also charge mobile phones and tablets connected to the hub's USB ports with a current of up to 1.5A/5V. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. One of the USB-C connectors is used to connect to the laptop with the included 25 cm long cable with a reversible USB-C connector on both ends. The second USB-C connector is reserved only for powering and simultaneous charging of phone or laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port and above. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. The package includes extensions that allow the hub to be used as a pad under the laptop, which will ensure better cooling thanks to greater airflow under the laptop. At the same time, it improves ergonomics at your workplace. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (laptop connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W (only for charging), USB-A female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (phone) and the wall charger. USB outputs: 4x USB 5Gbps port, USB-A female connector. USB-C hub handle the connection of two external drives simultaneously. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A and USB-C ports. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 60Hz. 2K / WQHD resolution 2560 x 1440 at up to 120Hz. FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Wake-on-LAN support. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. UHS-I support. Speed up to 104 MB/s. Support hardware ECC function and CRC function. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. The blue LED indicates with constant light the hub connection to the computer. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 283 x 42 x 17 mm. Weight 133 g. USB-C male cable length 25 cm Supported operating systems: Microsoft Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated operating systems, and support from the device (laptop, phone) is also required. Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub, USB-C cable 25 cm long, pedestals for raising, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.

The multi-port USB-C 10Gbps AXAGON HMC-5G21 SPEEDSTER 5in1 hub expands your notebook, computer, or phone with five ports. Connection is made via a 13 cm USB-C cable. This gives you immediate access to a 4K monitor connection and other USB peripherals. It also allows you to power your notebook using Power Delivery technology. Compatibility with Thunderbolt 3/4/5 also provides a simple and compact docking station for laptops like the Apple MacBook Air or Pro. Two USB-A 10Gbps outputs allow connection of external drives, flash drives, mouse, printer, and other USB accessories. USB ports also charge mobile phones and tablets with a current of up to 1.5A. The hub is also equipped with a combined USB-C port that can be used for data transfer (USB 10Gbps) or for charging a notebook using a Power Delivery charger. With a suitable PD charger, you can power not only your notebook but also the hub itself with up to 60W power using Power Delivery 3.0 technology. The HDMI output allows connection of an external monitor, TV, or projector with resolutions up to 4K/30Hz Ultra HD, 2K/60Hz Quad HD, or 1080p/120Hz Full HD and multi-channel audio transmission. For proper video output functionality, the notebook must have a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or a Thunderbolt 3 and higher port. The compact and slim aluminum body not only looks great but also ensures mechanical durability and passive cooling. Youll also appreciate the finely textured surface that resists fingerprints. The USB-C hub is an ideal accessory for laptops without USB-A connectors or video output. This allows you to use your existing USB peripherals without buying new ones. Thanks to Plug and Play and Hot Plug functions, connecting the hub is very simple without complicated installation, and peripherals can be connected or disconnected while the computer is running. The hub can also be connected to phones with a USB-C connector. You can connect a flash drive, keyboard, mouse, monitor, TV, or projector to your phone. Input (connection to notebook): USB 10Gbps (USB 3.2 Gen 2), USB-C male connector. Compatible with USB 3.2 Gen 1, USB4, and Thunderbolt 3/4/5. Input (power): USB Power Delivery 3.0 60W port, USB-C female connector. Notebook power via wall adapter through USB-C hub. PD power must be supported by both the notebook (phone) and the charger. USB outputs: 2× USB 10Gbps ports, USB-A female connector. 1× USB 10Gbps port, USB-C female connector. 1× USB 10Gbps port for data transfer or Power Delivery charging, USB-C female connector. The USB-C hub can connect several external drives at the same time. HDMI output: 1× HDMI port, HDMI A female connector. 4K / UHD resolution 4096 × 2160 at up to 30Hz. 2K / QHD resolution 2560 ×1 440 at up to 60Hz. 1080p / FHD resolution 1920 × 1080 at up to 120Hz. Support for the above max resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For video output to work, the hub must be connected to a USB-C port that supports DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port with Thunderbolt 3/4/5 support. A suitable OS is also required. Without this support, the video output will not be available. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signaling) support. Full HDCP 1.4 and 2.2 (High-bandwidth Digital Content Protection) support. Support for up to 8-channel LPCM audio. Support for sampling rates up to 192kHz and up to 24-bit audio depends on the source and destination devices, i.e., notebook/phone and TV/monitor/AV receiver. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power-saving mode support. Power via USB bus - bus power, or PD charger. Durable aluminum body for better hub cooling. Blue LED indicates hub connection to the computer (steady light), or brighter when connected to a Power Delivery charger. High-quality shielded cable ensures high communication speed and minimal interference. USB cable length 13 cm. Supported operating systems: Microsoft Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS, and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated operating systems and also depends on device support (notebook, phone). Proper product functionality may also be affected by graphics card drivers. It is recommended to download the latest drivers.

The AXAGON HMC-5H 5-in-1 multi-port USB-C 5Gbps hub expands your laptop, computer, or phone with five ports. Via the reversible USB-C connector, you can quickly and easily connect a monitor and three USB devices to your computer at the same time. It also gives you the option to power your laptop using Power Delivery technology. Thanks to the 1 m long cable, you can conveniently arrange the devices you need for work according to your needs. The port replicator thus serves as a universal 5-in-1 docking station for modern laptops. The USB hub offers three 5Gbps USB outputs with standard USB-A connectors. The hub can also handle the permanent connection of multiple external drives at the same time. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub can also charge mobile phones and tablets connected to the hub's USB ports with a current of up to 1.5A/5V. From the hub, you can easily charge, for example, an Android smartphone, Apple iPhone, Apple iPad, etc. The USB-C connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with power up to 100W. Connect a suitable USB-C Power Delivery charger to the hub and connect the hub to a laptop that supports Power Delivery. This will also free up one USB-C port on your laptop. The HDMI output provides high-quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. For the video output to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port, Thunderbolt 4 or higher. The elegant aluminum body ensures not only mechanical durability, but also passive cooling. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub is also suitable for connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV, or projector to the phone. Input (laptop connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W (only for charging), USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (phone) and the wall charger. USB outputs: 3x USB 5Gbps port, USB-A female connector. USB-C hub can handle connecting multiple external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB ports. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 30Hz. 2K / WQHD resolution 2560 x 1440 at up to 60Hz. FHD resolution 1920 x 1080 at up to 120Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver. Other features: Possibility to connect your device while running thanks to Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminum body for better hub cooling. High-quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 121 x 35 x 10 mm. Weight 75 g. USB-C male cable length 100 cm. Supported operating systems: Microsoft Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on the OS used and support from the device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS versions and also depends on support from the device (notebook, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of the drivers. Package contains: USB-C hub with fixed 100 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.

The multi-port USB-C 5Gbps AXAGON HMC-5H60 5in1 hub expands your laptop, computer or phone with five ports. Via the double-sided USB-C connector, you can quickly and easily connect a monitor and three USB devices to the computer at the same time. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will thus provide you with a simple and compact 5in1 docking station for modern laptops. The USB hub offers three USB 5Gbps outputs, two with standard USB-A and a third with USB-C data connector. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub can permanently connect several external drives simultaneously and also allows charging of phones and tablets with up to 1.5A/5V current. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Another USB-C (PD) connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/120Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colours and contrasts. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3, 4 port and above. The compact and slim aluminium body not only looks great, but also provides mechanical durability and passive cooling. You will also be pleased with the finely textured surface, which does not leave fingerprints. USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (connection to laptop): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C male connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 - 100W port, USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (phone) and the wall charger. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 5Gbps port, USB-C female connector. USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 60Hz. 2K / WQHD resolution 2560 x 1440 at up to 120Hz. FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.2 (High-bandwidth Digital Content Protection). Support for up to 2-channel LPCM audio. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. The LED indicates with constant light the hub connection to the computer. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions 110 x 32 x 11 mm. Weight 52 g (incl. cable). USB cable length 15 cm. Supported operating systems: Microsoft Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 15 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

<p>.</p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">The multi-port USB-C 10Gbps <strong>AXAGON HMC-6G2L hub 6in1</strong> expands your laptop, computer or phone<strong> with six ports</strong>. You can easily and quickly connect a <strong>monitor, three USB devices and a Gigabit Ethernet network </strong>to the computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using <strong>Power Delivery </strong>technology at the same time. The port replicator will thus provide you with a simple and <strong>compact 6-in-1 docking station</strong> not only for Windows laptops but also for Apple laptops such as MacBook Air or MacBook Pro.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">The USB hub offers three <strong>USB 10Gbps outputs</strong>. Two with standard <strong>USB-A</strong> and third with<strong> USB-C</strong> data connector. With the advanced <strong>USB 3.2 Gen 2 standard</strong>, you can connect high-speed devices such as NVMe M.2 external drives to all outputs at up to <strong>2x the speed of 10 Gb/s </strong>compared to standard Gen 1 hubs with only 5 Gbps. The hub can permanently connect several external drives simultaneously and also allows <strong>charging of phones and tablets with up to 1.5A/5V current</strong>. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">Another USB-C (PD) connector is reserved only for charging phones or laptops using <strong>Power Delivery 3.0 technology</strong> <strong>with up to 100W of power</strong>. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>HDMI output</strong> provides high quality image up to<strong> 4K/60Hz Ultra HD</strong> resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of <strong>2K/120Hz</strong> or <strong>FullHD/240Hz</strong> are also supported. Thanks to <strong>HDR</strong> (high dynamic range) <strong>support</strong>, you can enjoy a significantly expanded range of colours and contrasts. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3, 4 port and above.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Gigabit network card</strong> extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>The compact and slim aluminium body</strong> not only looks great, but also provides mechanical durability and<strong> passive cooling</strong>. You will also be pleased with the finely textured surface, which does not leave fingerprints.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">You can use your current USB peripherals without having to purchase new ones. Thanks to the <strong>Plug and Play</strong> and <strong>Hot Plug functions</strong>, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of <strong>connection to phones</strong> with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Input (connection to laptop):</strong><br /> • USB 10Gbps (USB 3.2 Gen 2), connector USB-C male.<br /> • Compatible with USB 3.2 Gen 1, USB4 a Thunderbolt 3/4.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Input (power supply):</strong><br /> • USB Power Delivery 3.0 100W, USB-C female connector.<br /> • Charging of the notebook from the power adapter via USB-C hub.<br /> • PD power must be supported by both the laptop (phone) and the wall charger.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>USB outputs:</strong><br /> • 2x USB 10Gbps port, USB-A female connector.<br /> • 1x USB 10Gbps port, USB-C female connector.<br /> • USB-C hub can handle the connection of several external drives at the same time.<br /> • Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Video output:</strong><br /> • 1x HDMI A port, HDMI A female connector.<br /> • 4K resolution 4096 x 2160 at up to 60Hz. <br /> • 2K / WQHD resolution 2560 x 1440 at up to 120Hz. <br /> • FHD resolution 1920 x 1080 at up to 240Hz.<br /> • Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. <br /> • For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements.<br /> • HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details.<br /> • HPD (Hot-Plug-Detect) support.<br /> • TMDS (Transition Minimized Differential Signalling) support.<br /> • Full support for HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection).<br /> • Support for up to 2-channel LPCM audio.<br /> • Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>RJ-45 output:</strong><br /> • Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection.<br /> • Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s.<br /> • Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications.<br /> • 10/100/1000 Mb/s auto-detection.<br /> • Wake-on-LAN support.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Other features:</strong><br /> • Possibility to connect your device while running thanks to the Hot Plug support.<br /> • Full Plug and Play support.<br /> • Sleep mode support. <br /> • Power via USB bus - USB bus power or from PD wall charger.<br /> • Heavy-duty aluminium body for better hub cooling.<br /> • The high quality shielded cable ensures high communication speed and minimal undesirable interference.<br /> • Dimensions 120 x 46 x 15 mm.<br /> • Weight 79 g (incl. cable). <br /> • USB cable length 15 cm.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Supported operating systems:</strong><br /> • Microsoft Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. <br /> • Compatibility depends on the operating system and device manufacturer support.<br /> • DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer.<br /> • Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Package contains:</strong><br /> • USB-C hub with fixed 15 cm long cable,</span></span></p>

The multi-port USB-C 10Gbps AXAGON HMC-6G2L hub 6in1 expands your laptop, computer, or phone with six ports. You can easily and quickly connect a monitor, three USB devices, and a Gigabit Ethernet network to your computer at the same time via the reversible USB-C connector. You also have the possibility to power your laptop simultaneously using Power Delivery technology. This port replicator offers a simple and compact 6-in-1 docking station for Windows laptops as well as Apple laptops like the MacBook Air or MacBook Pro. The USB hub features three USB 10Gbps outputs: two with standard USB-A connectors and a third with a USB-C data connector. With the advanced USB 3.2 Gen 2 standard, you can connect high-speed devices, such as NVMe M.2 external drives, to all outputs at up to twice the speed of 10 Gb/s compared to standard Gen 1 hubs (5 Gbps). The hub can simultaneously connect multiple external drives and also allows charging phones and tablets with up to 1.5A/5V current. You can easily charge an Android smartphone, Apple iPhone, Apple iPad, and more from the hub. Another USB-C (PD) connector is reserved exclusively for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger to the hub and connect the hub to a laptop that supports Power Delivery to save one USB-C port. The HDMI output delivers high-quality images up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High refresh rates at popular gaming resolutions such as 2K/120Hz and FullHD/240Hz are also supported. Thanks to HDR (High Dynamic Range) support, you can enjoy significantly enhanced color and contrast ranges. For video outputs to function properly, your laptop must have a USB-C port that supports DisplayPort Alternate Mode (DP Alt Mode) or Thunderbolt 3, 4, or higher. The Gigabit network card provides your computer with a fast, stable network connection, adding a missing RJ-45 port or another network card as needed. The compact and slim aluminum body not only looks great but also ensures mechanical durability and passive cooling. The finely textured surface is fingerprint-resistant for a clean look. You can continue using your current USB peripherals without needing to purchase new ones. Thanks to Plug and Play and Hot Plug functions, connecting the hub is easy and requires no complicated installation, and peripherals can be easily connected or disconnected while your computer is running. The hub also supports connection to phones with a USB-C port—for example, you can connect a flash drive, keyboard, mouse, display, TV, or projector to your phone. Input (connection to laptop): USB 10Gbps (USB 3.2 Gen 2), USB-C male connector. Compatible with USB 3.2 Gen 1, USB4, and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W, USB-C female connector. Notebook charging via USB-C hub using a power adapter. PD power must be supported by both the laptop (or phone) and the wall charger. USB outputs: 2x USB 10Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-C female connector. The USB-C hub can handle multiple external drives connected simultaneously. Mobile devices (including iPad) can be charged with up to 1.5A/5V from the hub's USB-A and USB-C ports. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 60Hz. 2K / WQHD resolution 2560 x 1440 at up to 120Hz. FHD resolution 1920 x 1080 at up to 240Hz. Maximum supported resolutions and refresh rates require connection to a computer with DisplayPort 1.4. To use the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or Thunderbolt 3/4. A compatible OS is also required. The video output function will not be available without these requirements. HDR support (High Dynamic Range, 10-bit support) for realistic reproduction of bright and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection). Supports up to 2-channel LPCM audio. Supports 2-channel audio with a sampling rate up to 192 kHz and up to 24-bit audio—depends on the source and end device, such as laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable. Supported data rates for the Ethernet interface: 10/100/1000 Mb/s. Supports IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Wake-on-LAN support. Other features: Ability to connect devices while running, thanks to Hot Plug support. Full Plug and Play support. Sleep mode support. Power via USB bus—USB bus power or PD wall charger. Heavy-duty aluminum body for improved cooling. High quality shielded cable ensures fast communication and minimizes interference. Dimensions: 120 x 46 x 15 mm. Weight: 79 g (including cable). USB cable length: 15 cm. Supported operating systems: Microsoft Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS, and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OSes and also depends on support from the device (notebook, phone) manufacturer. Graphics card drivers may also affect correct product operation. We recommend downloading the latest driver versions. Package includes: USB-C hub with built-in 15 cm cable, multilingual manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Multiport USB-C 3.2 Gen 1 hub AXAGON HMC-6GL expands your laptop, computer or phone with six ports. You can easily and quickly connect up to three USB devices, Gigabit Ethernet network and HDMI display to your computer at the same time via the doublesided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a simple and compact 6in1 docking station for notebook like MacBook Pro. The USB hub offers three USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. USB-C connector is dedicated to power up a laptop or mobile phone using Power Delivery 3.0 technology by power up to 60W. Connect the USB-C Power Delivery charger to the hub and connect the hub to the laptop. This saves one USB-C port. The condition is a laptop with Power Delivery charging support from the USB-C port and a suitable PD charger. HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. Popular gaming resolution WQHD 2560 x 1440px at 60Hz or FullHD 1920 x 1080px at 60, 100 and 120Hz max. are also supported. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Gigabit network card extends your computer by a fast network connection, adds the missing RJ-45 network connector or another network card. LAN adapter is compatible with 10/100/1000 Mbit/s speeds and also offers a wide range of functions for example IPv4/IPv6, crossover detection and autocorrection, Wake-on-LAN, VLAN support or advanced Power Management features. Elegant aluminum body ensures mechanical resistance and quality cooling. The glossy upper part with a decent backlit logo underlines the premium look of the hub. Port replicator is an ideal accessory for laptops without USB-A connectors, network card and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, the connection of the hub is very simple without complicated installation. It is also possible to easily connect and disconnect peripherals while the computer is running. The hub does not afraid of connection to phones with a USB-C connector - for example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 connector. Compatible with Thunderbolt 3. Input USB type C male connector on fixed 20 cm cable. USB outputs: 3x SuperSpeed USB port, USB-A female connector. 1x USB type C Power Delivery port (only charging) USB-C female connector. Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 1 interface used (theoretical-ly up to 5 Gbit/s). USB-C hub can handle connection of several external drives simultaneously. Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.1A at 5V (depending on the capabilities of the computer's USB port). HDMI output: HDMI. HDMI A (F) female connector. Maximum supported resolution 4K / 4096 x 2160 at 30 Hz. WQHD resolution 2560 x 1440 at 60 Hz max. FullHD resolution 1920 x 1080 at 60, 100, 120 Hz max. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. At the same time, support from the device (laptop, phone) and the operating system is necessary. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signaling) support. Full HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio format support. Sample rate up to 192 kHz and 24bit audio support depends on source and target device i.e. notebook/phone and TV/display/AV receiver. RJ-45 Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN feature support in different modes Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, ECMA-393 proxZzzy for sleeping hosts, RealWoW! and also Link Change wake-up. Advanced Power Management features: The adapter supports advanced power management to reduce losses during standby or light traffic on the network. It further supports advanced power saving when the Ethernet cable has been disconnected. Supports Advanced Configuration Power Management Interface (ACPI), Link Power Man-agement (LPM) or IEEE 802.3az EEE (Energy Efficient Ethernet) an Power Delivery: Power Delivery 3.0 support device power supply from the PD wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 60W - 20V/3A. Notebook or phone with Power Delivery charging support from the USB-C port and a suitable PD charger is necessary. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings. The logo backlight indicates computer USB port connectionwith steady light. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions 110 x 35 x 13 mm. Weight 60 g (incl. cable). USB cable length 20 cm. Supported OS: Microsoft Windows 10 / 11, Mac OS, Linux, Android and Chrome OS.Compatibility depends on used OS and support from device manufacturer. Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed. Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Package contains: USB-C hub with fixed 20 cm long cable, printed installation guie CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.

The multi-port USB-C 5Gbps AXAGON HMC-6GLN GLASS 6in1 hub expands your laptop, computer or phone with six ports. You connect your laptop to the hub via a 20 cm long USB-C cable. You immediately have a connection for a monitor, three USB devices and an RJ-45 connector for a Gigabit Ethernet network. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will provide you with a simple and compact 6in1 docking station for modern laptops. The USB hub offers three USB 5Gbps outputs, two with standard USB-A and a third with USB-C data connector. Transfer rate is up to 5Gb/s thanks to USB 3.2 Gen 1 interface. The hub can permanently connect several external drives simultaneously and also allows charging of phones and tablets with up to 1.5A/5V current. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Another USB-C connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. The HDMI output enables the connection of an external monitor, TV or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD or 1080p/240Hz Full HD and the transmission of multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colours and contrasts without limitations. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. The compact aluminum body not only looks great, but also provides mechanical durability and passive cooling. The glossy upper part with a decent backlit logo underlines the premium look of the hub. USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. For the hub to function properly, your laptop's USB-C port must support video output (DisplayPort Alternate Mode or Thunderbolt 3, 4 and above) and Power Delivery powered. The hub can easily connect to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (computer, tablet or phone connection): • USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C male connector. • Compatible with USB 10Gbps, USB4, Thunderbolt 3/4. Input (power supply): • USB Power Delivery 3.0 100W, USB-C female connector. • Charging of the notebook from the power adapter via USB-C hub. • PD power must be supported by both the laptop (tablet, phone) and the wall charger. USB outputs: • 2x USB 5Gbps port, USB-A female connector. • 1x USB 5Gbps port, USB-C female connector. • USB-C hub can handle the connection of several external drives at the same time. • Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports. Video output: • 1x HDMI port, HDMI A female connector. Maximum supported resolution: • 1 monitor - up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD. Video features: • For Apple devices running macOS, the maximum refresh rate is usually limited to 60Hz. • To achieve maximum resolution and frequency values on video outputs, the hub must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 3. • A suitable updated OS and up-to-date graphics drivers are also required. • HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details. • HPD (Hot-Plug-Detect) support. • TMDS (Transition Minimized Differential Signalling) support. • Full support for HDCP 1.4 and 2.2 (High-bandwidth Digital Content Protection). • 2-channel LPCM audio, compressed audio (AC-3, DTC) and HBR audio format support. • Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: • Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. • Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. • Supported IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T. specifications. • 10/100/1000 Mb/s auto-detection. Other features: • Possibility to connect your device while running thanks to the Hot Plug support. • Full Plug and Play support. • Standby mode support. • Power supply via USB bus (USB bus power). • Power supply via PD charger (not included). • High quality shielded cable ensures fast communication speed and minimal unwanted interference. • Dimensions 13 x 110 x 35 mm (H x W x D). • Weight 58 g (incl. cable). • USB-C cable 20 cm long for connecting the hub to a laptop. Supported operating systems: • Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. • Compatibility depends on the operating system and device manufacturer support. • DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, tablet, phone). • Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: • USB-C hub with fixed 20 cm long cable, • multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, • packed in a cardboard box with a hanging hole.

<p>The multi-port USB-C 5Gbps AXAGON HMC-7HX2 DUAL 4K DISPLAY 7in1 hub expands your laptop, computer or phone with seven ports. Connect your laptop to the hub via a 15 cm long USB-C cable. You immediately have a connection for a two 4K monitors, three USB devices and an RJ-45 connector for a Gigabit Ethernet network. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will provide you with a simple and compact 7in1 docking station for modern laptops.</p> <p>The USB hub offers three USB 5Gbps outputs, two with standard USB-A and a third with USB-C data connector. Transfer rate is up to 5Gb/s thanks to USB 3.2 Gen 1 interface. The hub can permanently connect several external drives simultaneously and also allows charging of phones and tablets with up to 1.5A/5V current. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc.</p> <p>Another USB-C connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port.</p> <p>Two HDMI outputs allow you to connect external monitors, TVs or projectors with up to 4K/60Hz Ultra HD resolution, even when two monitors are connected at the same time. Other popular resolutions are also supported, such as 2K/120Hz Quad HD or 1080p/240Hz Full HD and multi-channel audio transmission. Thanks to HDR support, you can enjoy a significantly expanded range of colours and contrasts without limitations.</p> <p>Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card.</p> <p>The compact aluminium body not only looks great, but also provides mechanical durability and passive cooling. USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running.</p> <p>For the hub to function properly, your laptop's USB-C port must support video output (DisplayPort Alternate Mode or Thunderbolt 3, 4 and above) and Power Delivery powered.</p> <p>The hub can easily connect to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone.</p> <p>Input (computer, tablet or phone connection):<br />• USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C male connector.<br />• Compatible with USB 10Gbps, USB4, Thunderbolt 3/4/5.</p> <p>Input (power supply):<br />• USB Power Delivery 3.0 - 100W port, USB-C female connector.<br />• Charging of the notebook from the power adapter via USB-C hub.<br />• PD power must be supported by both the laptop (tablet, phone) and the wall charger.</p> <p>USB outputs:<br />• 2x USB 5Gbps port, USB-A female connector.<br />• 1x USB 5Gbps port, USB-C female connector.<br />• USB-C hub can handle the connection of several external drives at the same time.<br />• Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports.</p> <p>Video output:<br />• 2x HDMI A port, HDMI A female connector.</p> <p>Maximum supported resolution:<br />• 1 monitor - up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD.<br />• 2 monitors - up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD.</p> <p>Video features:<br />• For Apple devices running macOS, the maximum refresh rate is usually limited to 60Hz.<br />• To achieve maximum resolution and frequency values on video outputs, the hub must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 3. • A suitable updated OS and up-to-date graphics drivers are also required.<br />• HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details.<br />• HPD (Hot-Plug-Detect) support.<br />• TMDS (Transition Minimized Differential Signalling) support.<br />• Full support for HDCP 1.4 and 2.2 (High-bandwidth Digital Content Protection).<br />• 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio format support.<br />• Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver.</p> <p>RJ-45 output:<br />• Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection.<br />• Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s.<br />• Supported IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T. specifications.<br />• 10/100/1000 Mb/s auto-detection.</p> <p>Other features: <br />• Possibility to connect your device while running thanks to the Hot Plug support.<br />• Full Plug and Play support.<br />• Standby mode support.<br />• Power supply via USB bus (USB bus power).<br />• Power supply via PD charger (not included).<br />• High quality shielded cable ensures fast communication speed and minimal unwanted interference.<br />• Dimensions 13 x 134 x 34 mm (H x W x D).<br />• Weight 59 g (incl. cable).<br />• USB-C cable 15 cm long for connecting the hub to a laptop.</p> <p>Supported operating systems:<br />• Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. <br />• Compatibility depends on the operating system and device manufacturer support.<br />• DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, tablet, phone).<br />• Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers.</p> <p> </p>

The multi-port USB-C 10Gbps AXAGON HMC-CUB83X2 DUAL 4K DISPLAY 7in1 hub expands your notebook, computer, or phone with two video outputs, a LAN connector, and USB ports. You can connect the notebook to the hub using the 15 cm long USB-C cable. This instantly gives you the option to connect two 4K monitors, three USB devices, and an RJ-45 connector for a Gigabit Ethernet network. At the same time, notebook charging via Power Delivery technology is available. Compatibility with Thunderbolt 3/4/5 provides you with a 7in1 docking station for laptops such as the Apple MacBook Air or Pro. The USB hub offers three USB 10Gbps data outputs, two with standard USB-A and a third with a USB-C connector. Thanks to the USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10 Gb/s. The hub can also handle the permanent connection of several external drives simultaneously. Another USB-C connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with a power of up to 100 W. Connect a suitable USB-C Power Delivery charger to the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. The docking station offers two video outputs — HDMI and DisplayPort — and allows you to connect external monitors, TVs, or projectors with a resolution of up to 8K/30Hz Ultra HD. Other resolutions are also supported, such as 4K/144Hz Ultra HD, 2K/240Hz Quad HD, or 1080p/240Hz Full HD, as well as multichannel audio transmission over HDMI. When two monitors are connected simultaneously, it provides a 4K/60Hz resolution on each of them. Thanks to HDR (High Dynamic Range) support, users can enjoy a significantly wider colour range and higher contrast, which is appreciated during both work and entertainment. The Gigabit network card extends your computer with a fast and stable network connection, adding a missing RJ-45 network connector or another network card. The compact aluminium body not only looks great, but also provides mechanical durability and passive cooling. The USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug & Play and Hot Plug functions, connecting the hub is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. For proper hub function, the USB-C port of your notebook must support video output (DisplayPort Alternate Mode or Thunderbolt 3 and above) and Power Delivery. The hub can easily handle connection to phones and tablets with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV, or projector to the phone. Input (connection to a computer, tablet or phone): USB 10Gbps (USB 3.2 Gen 2), USB-C male connector. Compatible with USB 5Gbps, USB 20Gbps, USB 40Gbps, Thunderbolt 3/4/5. Input (power supply): USB Power Delivery 3.0 100 W, USB-C female connector. Charging of the laptop from the power adapter via USB-C hub. PD power supply must be supported by the laptop (tablet, phone), the cable, and the wall charger. USB outputs: 2× USB 10Gbps port, USB-A female connector. 1× USB 10Gbps port, USB-C female connector. The USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) from the hub's USB-A and USB-C ports. Video output: 1× DP port, DP female connector. 1× HDMI A port, HDMI A female connector. Maximum supported resolution: 1 monitor (DP) up to 8K/30Hz Ultra HD, 4K/144Hz Ultra HD, 2K/240Hz Quad HD, 1080p/240Hz Full HD. 1 monitor (HDMI) up to 8K/30Hz Ultra HD, 4K/144Hz Ultra HD, 2K/240Hz Quad HD, 1080p/240Hz Full HD. 2 monitors up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD. Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60 Hz. To achieve maximum resolution and refresh rate values on the video outputs, the hub must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 3. A suitable updated OS and up-to-date graphics drivers are also required. HDR support (High dynamic range, 10-bit support) — realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio format support. Supports sample rates up to 192 kHz and up to 24-bit audio, depending on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface: 10/100/1000 Mb/s. Supports IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Other features: Possibility to connect your device while running thanks to Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus — USB bus power. Power supply via PD charger (not included in package). The LED indicates the connection of the dock to the computer with a steady glow. High-quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions: 15 × 107 × 45 mm (H x W x D). Weight: 66 g (incl. cable). USB-C cable 15 cm long for connecting the hub to a laptop. Supported operating systems: Windows 10/11, macOS, Linux, iPadOS, iOS, Chrome OS and Android. Compatibility depends on the operating system and support from the device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS versions and also depends on support from the device (laptop, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of the drivers. Package contains: USB-C hub with fixed 15 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box with a hanging hole.

AXAGON HMC-KB-CRL KEYBOARD hub turns your phone, tablet or mini-laptop into a full-fledged computer workplace. You connect your mobile device to the 9in1 docking station via the supplied 60 cm long cable. In no time, you have an integrated keyboard, SD and microSD card reader, and connectors for connecting an external monitor, three USB devices, headphones or headset, and Power Delivery power. However, it is necessary that the USB-C port of your mobile device supports video output (DisplayPort Alternate Mode) and Power Delivery. The keyboard, built into an elegant aluminum hub body, is equipped with chiclet keys with a scissor mechanism and 2 mm stroke for precise and quiet typing. The keyboard offers adjustable backlighting in 5 levels, 12 multimedia keys and the possibility of increasing the inclination for comfortable and ergonomic use. Of course, the keys are printed with Cyrillic localization. The HDMI output enables the connection of an external monitor, TV or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/120Hz Quad HD or 1080p/200Hz Full HD and the transmission of multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colours and contrasts without limitations. Three USB-A 5Gbps outputs allow connection of external drives (up to 2 at the same time), flash drive, mouse, printer and other USB accessories. The USB ports also charge mobile phones and tablets with a power of up to 7.5W. The memory card reader supports reading and writing of all versions of SD and microSD cards with a capacity of up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The 3.5 mm audio output offers the possibility of connecting stereo headphones, a headset or active speakers. The PD USB-C input is designed for a suitable Power Delivery charger. This allows both your mobile device and the hub to be powered directly from the PD charger using Power Delivery 3.0 technology with up to 100W of power. The Multiport Hub with Keyboard is especially ideal for users of phones and tablets Samsung's DeX-enabled Z-series Fold (from Fold3), Galaxy S (from S9), Note (from Note8) and Galaxy Tab S (from S4 except Lite and FE versions). The Dock also enables desktop mode for the Apple iPad Pro and iPad Air (from 2022) tablets. In addition, it ensures compatibility with iPad mini (from 2021) and with iPhone 15 Pro / Pro Max phones, while the image is transferred via mirroring. Input (connection to mobile device / computer): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W port (only for charging), USB-C female connector. Powering the mobile device from the mains adapter via the USB-C hub. PD power must be supported by both the mobile device and the mains charger. USB outputs: 3x USB 5Gbps port, USB-A female connector. USB-C hub handle the connection of two external drives simultaneously. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A ports. Video output: 1x HDMI A port, HDMI A female connector. 4K / UHD resolution 4096 x 2160 at up to 60Hz. 2K / QHD / WQHD resolution 2560 x 1440 at up to 120Hz. 1080p / FHD resolution 1920 x 1080 at up to 200Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit/RGB support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. mobile device/computer and TV/monitor/AV receiver. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. UHS-I support. Speed up to 104 MB/s. Support hardware ECC function and CRC function. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. Audio output / input: 1x 3.5 mm 4pin jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Keyboard: Keys with scissor mechanism and 2 mm stroke for precise and silent typing. 12 multimedia keys: home, search, brightness, stop / start play / pause, previous / next track, mute, volume, backlight. White key backlight with four intensity settings and backlight off (f12).  Switch between OS: fn+S for Windows / Android, fn+A for macOS / iPadOS / iOS. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. The LED indicates with constant light the hub connection to the computer. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 296 x 128 x 11 / 6 mm. Weight 353 g (without cable). USB-C cable 60 cm long with connectors C-M straight / C-M bent 90°. Supported operating systems: Microsoft Windows 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C Keyboard hub, USB-C cable 60 cm long, Keyboard hub travel bag,  self-adhesive rubber pads to increase the inclination of the keyboard, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box.

AXAGON HMC-KB-NRD KEYBOARD hub turns your phone, tablet or mini-laptop into a full-fledged computer workplace. You connect your mobile device to the 9in1 docking station via the supplied 60 cm long cable. In no time, you have an integrated keyboard, SD and microSD card reader, and connectors for connecting an external monitor, three USB devices, headphones or headset, and Power Delivery power. However, it is necessary that the USB-C port of your mobile device supports video output (DisplayPort Alternate Mode) and Power Delivery. The keyboard, built into an elegant aluminum hub body, is equipped with chiclet keys with a scissor mechanism and 2 mm stroke for precise and quiet typing. The keyboard offers adjustable backlighting in 5 levels, 12 multimedia keys and the possibility of increasing the inclination for comfortable and ergonomic use. Of course, the keys are printed with Nordic localization. The HDMI output enables the connection of an external monitor, TV or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/120Hz Quad HD or 1080p/200Hz Full HD and the transmission of multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colours and contrasts without limitations. Three USB-A 5Gbps outputs allow connection of external drives (up to 2 at the same time), flash drive, mouse, printer and other USB accessories. The USB ports also charge mobile phones and tablets with a power of up to 7.5W. The memory card reader supports reading and writing of all versions of SD and microSD cards with a capacity of up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The 3.5 mm audio output offers the possibility of connecting stereo headphones, a headset or active speakers. The PD USB-C input is designed for a suitable Power Delivery charger. This allows both your mobile device and the hub to be powered directly from the PD charger using Power Delivery 3.0 technology with up to 100W of power. The Multiport Hub with Keyboard is especially ideal for users of phones and tablets Samsung's DeX-enabled Z-series Fold (from Fold3), Galaxy S (from S9), Note (from Note8) and Galaxy Tab S (from S4 except Lite and FE versions). The Dock also enables desktop mode for the Apple iPad Pro and iPad Air (from 2022) tablets. In addition, it ensures compatibility with iPad mini (from 2021) and with iPhone 15 Pro / Pro Max phones, while the image is transferred via mirroring. Input (connection to mobile device / computer): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W port (only for charging), USB-C female connector. Powering the mobile device from the mains adapter via the USB-C hub. PD power must be supported by both the mobile device and the mains charger. USB outputs: 3x USB 5Gbps port, USB-A female connector. USB-C hub handle the connection of two external drives simultaneously. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A ports. Video output: 1x HDMI A port, HDMI A female connector. 4K / UHD resolution 4096 x 2160 at up to 60Hz. 2K / QHD / WQHD resolution 2560 x 1440 at up to 120Hz. 1080p / FHD resolution 1920 x 1080 at up to 200Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit/RGB support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. mobile device/computer and TV/monitor/AV receiver. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. UHS-I support. Speed up to 104 MB/s. Support hardware ECC function and CRC function. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. Audio output / input: 1x 3.5 mm 4pin jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Keyboard: Keys with scissor mechanism and 2 mm stroke for precise and silent typing. 12 multimedia keys: home, search, brightness, stop / start play / pause, previous / next track, mute, volume, backlight. White key backlight with four intensity settings and backlight off (f12). Switch between OS: fn+S for Windows / Android, fn+A for macOS / iPadOS / iOS. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. The LED indicates with constant light the hub connection to the computer. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 296 x 128 x 11 / 6 mm. Weight 353 g (without cable). USB-C cable 60 cm long with connectors C-M straight / C-M bent 90°. Supported operating systems: Microsoft Windows 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C Keyboard hub, USB-C cable 60 cm long, Keyboard hub travel bag, self-adhesive rubber pads to increase the inclination of the keyboard, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box.

AXAGON HMC-KB-US KEYBOARD hub turns your phone, tablet, or mini-laptop into a full-fledged computer workstation. You connect your mobile device to the 9-in-1 docking station via the supplied 60 cm long cable. In no time, you have an integrated keyboard, SD and microSD card reader, and connectors for connecting an external monitor, three USB devices, headphones or headset, and Power Delivery power. However, it is necessary that the USB-C port of your mobile device supports video output (DisplayPort Alternate Mode) and Power Delivery. The keyboard, built into an elegant aluminum hub body, is equipped with chiclet keys with a scissor mechanism and 2 mm stroke for precise and quiet typing. The keyboard offers adjustable backlighting in 5 levels, 12 multimedia keys, and the possibility of increasing the incline for comfortable and ergonomic use. Of course, the keys are printed with English localization. The HDMI output enables connection to an external monitor, TV, or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/120Hz Quad HD, or 1080p/200Hz Full HD and transmits multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colors and contrasts without limitations. Three USB-A 5Gbps outputs allow the connection of external drives (up to 2 at the same time), flash drive, mouse, printer, and other USB accessories. The USB ports also charge mobile phones and tablets with power up to 7.5W. The memory card reader supports reading and writing of all versions of SD and microSD cards with a capacity of up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The 3.5 mm audio output offers the possibility of connecting stereo headphones, a headset, or active speakers. The PD USB-C input is designed for a suitable Power Delivery charger. This allows both your mobile device and the hub to be powered directly from the PD charger using Power Delivery 3.0 technology with up to 100W of power. The Multiport Hub with Keyboard is especially ideal for users of phones and tablets Samsung’s DeX-enabled Z-series Fold (from Fold3), Galaxy S (from S9), Note (from Note8), and Galaxy Tab S (from S4, except Lite and FE versions). The Dock also enables desktop mode for the Apple iPad Pro and iPad Air (from 2022) tablets. In addition, it ensures compatibility with iPad mini (from 2021) and with iPhone 15 Pro / Pro Max phones, while the image is transferred via mirroring. Input (connection to mobile device / computer): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W port (only for charging), USB-C female connector. Powering the mobile device from the mains adapter via the USB-C hub. PD power must be supported by both the mobile device and the mains charger. USB outputs: 3x USB 5Gbps port, USB-A female connector. USB-C hub handles the connection of two external drives simultaneously. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A ports. Video output: 1x HDMI A port, HDMI A female connector. 4K / UHD resolution 4096 x 2160 at up to 60Hz. 2K / QHD / WQHD resolution 2560 x 1440 at up to 120Hz. 1080p / FHD resolution 1920 x 1080 at up to 200Hz. Support for the above max supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit/RGB support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signaling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. mobile device/computer and TV/monitor/AV receiver. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. UHS-I support. Speed up to 104 MB/s. Support hardware ECC function and CRC function. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. Audio output / input: 1x 3.5 mm 4pin jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Keyboard: Keys with scissor mechanism and 2 mm stroke for precise and silent typing. 12 multimedia keys: home, search, brightness, stop / start play / pause, previous / next track, mute, volume, backlight. White key backlight with four intensity settings and backlight off (f12). Switch between OS: fn+S for Windows / Android, fn+A for macOS / iPadOS / iOS. Other features: Possibility to connect your device while running thanks to Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminum body for better hub cooling. The LED indicates with constant light the hub connection to the computer. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 296 x 128 x 11 / 6 mm. Weight 353 g (without cable). USB-C cable 60 cm long with connectors C-M straight / C-M bent 90°. Supported operating systems: Microsoft Windows 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C Keyboard hub, USB-C cable 60 cm long, Keyboard hub travel bag, self-adhesive rubber pads to increase the inclination of the keyboard, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box. The version of the hub according to the keyboard layout: HMC-KB-US - American / English layout

AXAGON HMC-STND HMC-STND USB-C 5Gbps ALUMINUM STAND & HUB 7in1 Multi-port USB-C 5Gbps hub and aluminum stand for laptops. HDMI 4k/60Hz, GLAN, PD, and 3 USB-A ports. USB-C cable 60 cm. The AXAGON HMC-STND 7in1 Hub & Stand is a unique multifunctional hub integrated into a stand for laptops or tablets. This hub expands your laptop or tablet with six additional ports. You connect your laptop to the hub via a 60 cm USB-C <-> USB-C cable. In no time, you get connectivity for a monitor, three USB devices, an RJ-45 connector for a Gigabit Ethernet network, and Power Delivery technology for powering the laptop. The two-joint stand improves ergonomics and comfort while working and is suitable for devices from 10" to 16". It is ideal as a 7in1 docking station for Windows laptops and Apple MacBook Air or MacBook Pro. Three USB-A 5Gbps outputs allow the connection of external drives (up to 2 at the same time), a flash drive, mouse, printer, and other USB accessories. The USB ports also charge mobile phones and tablets with up to 7.5W of power. The Gigabit network card expands the computer with a fast and stable network connection, replaces a missing RJ-45 Ethernet connector, or adds an additional network card. The HDMI output enables connection of an external monitor, TV, or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/120Hz Quad HD, or 1080p/200Hz Full HD, as well as transmission of multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colors and contrasts without limitations. The PD USB-C input is designed for a suitable Power Delivery charger. This allows your mobile device and the hub to be powered directly from the PD charger using Power Delivery 3.0 technology with up to 100W of power. The second USB-C connector is used to connect to the laptop with the included 60 cm long cable with a reversible USB-C connector on both ends. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple, without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. A great advantage of the stand is the clever double-hinge solution that allows adjustment of the tilt angle and height of the laptop screen so that it is flush with the external monitor. This gives you an additional workspace at the correct eye level, which greatly improves ergonomics and comfort at work and boosts your productivity. The elegant design of this stand not only complements your desk in style, but also offers practical functions. The base and hub cover are made of robust aluminum castings that provide passive cooling and guarantee the long life and reliability of the stand and hub. In addition, the cutouts in the base optimize heat dissipation from the notebook, contributing to higher performance and longer life for your device. Thanks to the non-slip finish, your device stays securely in place without the risk of unwanted movement and without any damage to the surface of the laptop or the pad.

AXAGON HMC-U4 DUAL 4K DISPLAY dock turns your laptop, tablet or phone into a multimedia centre. With the next generation USB4 technology, this docking station offers a total data throughput of up to 40 Gbps. So, you can take full advantage of even the most demanding computer accessories and enjoy a high-end experience. Whether you're watching 8K video or working with two 4K monitors simultaneously, this technology delivers the performance you need. USB4 offers the benefit of Thunderbolt compatibility while supporting backward compatibility with previous generations of USB. You will connect your laptop to the 12in1 docking station via the supplied 80 cm long cable. In no time, you have fast SD (UHS-II) and microSD card reader, and connectors for connecting two external monitors, five USB devices, headphones or headset, and Power Delivery power. However, it is necessary that the USB-C port of your mobile device supports video output (DisplayPort Alternate Mode) and Power Delivery power. HDMI and DisplayPort outputs allows you connect an external monitor, TV or projector with up to 8K/30Hz Ultra HD, 4K/144Hz Ultra HD or 2K/240Hz Quad HD resolution, with support for multi-channel audio streaming. With HDR support, you can enjoy a richer colour spectrum and sharper contrasts for an even better visual experience. By connecting two monitors simultaneously, you get resolutions up to 4K/144Hz on the DP port output and 4K/60Hz on the HDMI output. All supported resolutions and features are directly dependent on the support of the connected monitor and laptop. The docking station has a total of three 10Gbps USB-C (2x) and USB-A (1x) outputs, as well as two 5Gbps USB-A outputs. These five USB ports allow you to connect external drives, flash drives, mouse, printer and other USB accessories. The USB ports also charge mobile phones and tablets with a power of up to 7.5W. The memory card reader supports reading and writing of all versions of SD (UHS-II) and microSD (UHS-I) cards with a capacity of up to 2TB. UHS-II cards reach speeds of up to 156 MB/s (full-duplex) or 312 MB/s (half-duplex), support for older UHS-I cards (max speed 104 MB/s) is a matter of course. The card reader enables simultaneous handling of cards in both slots and direct copying between them. You can use the 3.5 mm audio output to connect stereo headphones, headset or active speakers. It is equipped with a high-quality DAC converter, which supports sampling up to 384 kHz at 24 bits. You will enjoy superior sound quality that is ideal for lossless formats such as FLAC, WMA, WAV, APE, AAC and ALAC. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. The USB-C (PD) input is designed for a suitable Power Delivery charger. This allows both your mobile device and the dock to be powered directly from the PD charger using Power Delivery 3.0 technology with up to 100W of power. With the additional power supply via USB-C input (DC 5V), you can boost the power supply when operating without a PD charger connected and connect devices with higher power consumption such as multiple external drives to the multiport hub. The button on the top of the dock is used to turn the dock on and off. Thanks to the clever design with four rubber feet, the station stays firmly in place. Elegant ribbed surface on the top leaves no fingerprints. Vents on the underside ensure sufficient air circulation so that the dock does not overheat even at higher loads. Input (connection to computer or mobile device): USB4 40Gbps (USB4 Version 1.0), USB-C female connector. Compatible with Thunderbolt 3/4, USB 10Gbps, USB 5Gbps. Input (power supply): USB Power Delivery 3.0 - 100W connector (only for charging), USB-C female (PD) connector. PD power must be supported by both the mobile device and the mains charger. Additional power supply for external drives connected via hub, USB-C female connector (DC 5V). Recommended power supply 5V/2A. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-A female connector. 2x USB 10Gbps port, USB-C female connector. USB-C hub can handle the connection of two external drives simultaneously. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A ports. Video outputs: 1x HDMI A port, HDMI A female connector. 1x DP port, DisplayPort female connector. Maximum supported resolution: Laptop with USB4 40Gbps or Thunderbolt 4 port: 1 monitor - up to 8K/30Hz, 4K/144Hz Ultra HD, 2K/240Hz Quad HD, 1080p/360Hz Full HD 2 monitors - up to 4K/144Hz + 60Hz Ultra HD, 2K/240Hz + 144Hz Quad HD, 2x 1080p/240Hz Full HD Notebook with USB 10Gbps port: 1 monitor - up to 8K/30Hz, 4K/144Hz Ultra HD, 2K/240Hz Quad HD, 1080p/360Hz Full HD 2 monitors - up to 2x 4K/60Hz Ultra HD, 2x 2K/144Hz + 144Hz Quad HD, 2x 1080p/240Hz Full HD Video features: Also compatible with devices with Thunderbolt 3 ports. For Apple devices running macOS, the maximum refresh rate is usually limited to 60Hz. To achieve maximum resolution and frequency values on video outputs, the dock must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 4. A suitable updated OS and up-to-date graphics drivers are also required. HDR support (High dynamic range, 10 bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Up to 8-channel LPCM audio, compressed audio (AC-3, DTC) and HBR audio format support. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. The card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash, SD slot: SecureDigital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. SD UHS-II support. Speeds up to 156 MB/s Full Duplex or 312 MB/s Half Duplex. Support SD 1.0 to SD 4.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MicroSD UHS-I support. Speed up to 104 MB/s. Support hardware ECC function and CRC function. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. Audio output / input: 1x 3.5 mm 4 pin jack for headset, headphones or active speakers, 2-channel analog stereo output 384 kHz @ 24bit for playback, 192 kHz @ 24 bit analog microphone input for recording. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus (USB bus power). Power supply via PD charger (not included). Additional power supply for USB ports (USB-C DC 5V connector). Any USB charger (not included) with 5V output voltage and 2A current can be used. ON/OFF buton to switch the docking station on/off. The LED indicates the connection of the dock to the computer with a steady glow. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 188 x 80 x 20 mm. Weight 164 g (without cable). USB-C USB-C cable 80 cm long for connecting the dock to a laptop. USB-A USB-C cable 100 cm long for connecting additional power supply. Supported operating systems: Microsoft Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C docking station, cable (data) USB-C USB-C length 80 cm, cable (power) USB-A USB-C length 100 cm, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box.

AXAGON HMC-UFO USB-C 10Gbps UFO hub expands your laptop, computer or tablet with eight ports and an external box for M.2 drive. You will connect your laptop to the 9in1 docking station via the supplied USB-C 65 cm long cable. In no time, you have an integrated slot for an NVMe or SATA M.2 drive, an SD and microSD card reader, and connectors for connecting a monitor, USB devices, headphones, network cable, and Power Delivery power. Thunderbolt 3/4 compatibility also gives you a simple and compact docking station for a laptop such as the Apple MacBook Air or Pro. For the hub to function properly, your laptop's USB-C port must support video output (DisplayPort Alternate Mode or Thunderbolt 3 and above) and Power Delivery powered. You can connect a NVME or SATA M.2 SSD via the built-in slot on the top of the hub. The multiport hub thus becomes an external drive. M.2 cards can be single-sided or double-sided up to a size of 22x42, 22x60 and 22x80 mm. The external M.2 storage has no SSD capacity limitations, supports TRIM and UASP, and allows reading of S.M.A.R.T. information to monitor disk status. The top cover of the M.2 slot is made of aluminum, which provides optimal protection and heat dissipation. Screwless mounting makes changing discs quick and easy. A passive heatsink is included to effectively help reduce the temperature of M.2 drives. The vents around the cover ensure sufficient air circulation, which also supports efficient heat dissipation. The HDMI output enables the connection of an external monitor, TV or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD or 1080p/240Hz Full HD and the transmission of multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colors and contrasts. Two USB-A 10Gbps outputs allow connection of external drives, flash drive, mouse, printer and other USB accessories. The USB ports also charge mobile phones and tablets with a power of up to 7.5W. The Hub is also equipped with a combined USB-C port that can be used for data transfer (USB 5Gbps) or for charging a laptop using a Power Delivery charger. With the use of a suitable PD charger, you can power not only the laptop, but also the hub itself, with up to 100W of power, thanks to Power Delivery 3.0 technology. The memory card reader supports reading and writing of all versions of SD and microSD cards with a capacity of up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. You can use the 3.5 mm audio output to connect stereo headphones, headset or active speakers. It is equipped with a high-quality DAC converter, which supports sampling up to 384 kHz at 24 bits. You will enjoy superior sound quality that is ideal for lossless formats such as FLAC, WMA, WAV, APE, AAC and ALAC. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. Thanks to the clever design with four rubber pads on the base, the station stays firmly in place. One of the most practical features is the USB-C cable attachment, which is neatly wrapped around the base. Thanks to this solution, you can easily unwind exactly the length of cable you currently need, which prevents excess cable from taking up unnecessary space on your desk. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (connection to a computer or mobile device): USB 10Gbps (USB 3.2 Gen 2), USB-C male connector. Compatible with USB 5Gbps, USB4, Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 - 100W port, USB-C female connector. Powering the mobile device from the mains adapter via the USB-C hub. PD powering must be supported by both the mobile device and the mains charger. USB outputs: 2x USB 10Gbps port, USB-A female connector. 1x USB 5Gbps port for data transfer or Power Delivery charging, USB-C female connector. Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports. Video outputs: 1x HDMI port, HDMI A female connector. Maximum supported resolution: 1 monitor - up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60Hz. To achieve maximum resolution and frequency values on video outputs, the dock must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 4. A suitable updated OS and up-to-date graphics drivers are also required. HDR support (High dynamic range, 10 bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.2 (High-bandwidth Digital Content Protection). Up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio format support. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and target device, i.e. laptop/phone and TV/monitor/AV receiver. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Audio output / input: 1x 3.5 mm 4pin jack for headset, headphones or active speakers, 2-channel analog stereo output 384 kHz @ 24 bit for playback, 192 kHz @ 24 bit analog microphone input for recording. M.2 SSD slot: NVMe & SATA M.2 SSD disks. Designed for M key or B+M key format cards. NGFF 75-pin M-key slot for M.2 drives. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Support of TRIM functionality to limit gradual degradation of the SSD performance over time. Support for booting from an SSD in the hub's M.2 slot. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus - USB bus power. Power supply via PD charger (not included). The alminum cover of the M.2 slot helps to better dissipate heat. Higher surface hub temperature is not a problem - the heat generated by the hub and M.2 disk operation is better dissipated and transferred to the surroundings. The blue LED indicates with constant light the hub connection to the computer. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 32 x 110 x 100 mm (H x W x D). Weight 213 g (incl. cable). USB-C cable 65 cm long for connecting the hub to a laptop. Supported operating systems: Microsoft Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 65 cm long cable, passive heatsink, 2 pcs thermal conductive pads, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / UA / BG / CN / TR / ARA, packed in a cardboard box.

The AXAGON HMC-WL9 WIRELESS CHARGING 9in1 multi-port USB-C 10Gbps hub expands your laptop, computer, or phone with two video outputs, a LAN connector, USB ports, and a wireless charger. You connect your laptop to the hub via a 60 cm long USB-C cable. This gives you immediate access to connectivity for two 4K monitors, four USB devices, and an RJ-45 connector for a Gigabit Ethernet network. At the same time, you gain the option of powering your notebook using Power Delivery technology. Thanks to compatibility with Thunderbolt 3/4/5, the 9in1 docking station works with laptops such as the Apple MacBook Air or MacBook Pro. Wireless charging for mobile phones with power up to 15 W is integrated directly into the body of the hub. Thanks to the magnetic mounting system, you only need to place your phone on the surface and it automatically aligns into the optimal position. Charging is therefore maximally efficient, safe, and convenient. Naturally, it is compatible with the Qi1, Qi2, and MagSafe standards. To achieve maximum wireless charging performance, a 100 W PD charging adapter must be used. The wireless charging technology is compatible with a wide range of devices, such as Apple iPhone, Samsung, Google Pixel, Xiaomi, Nothing Phone, as well as models from OnePlus, Huawei, Motorola, and others. Thanks to the universal Qi standard, it is easy to charge older models with lower power output. The USB hub with 4 USB ports offers high-speed connectivity: two USB-A and one USB-C with speeds up to 10 Gbps for fast data transfer, and one USB-A 480 Mbps port ideal for a keyboard or mouse. Thanks to the USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10 Gb/s. The hub can also handle the permanent connection of several external drives simultaneously. The USB-C (PD) input is designed for a Power Delivery charger. This way, both the notebook and the dock are powered directly from a PD charger using Power Delivery 3.0 technology with power up to 100 W. Two video outputs, HDMI and DisplayPort, allow you to connect external monitors, TVs, or projectors with up to 4K/60Hz Ultra HD resolution when two monitors are connected at the same time. Other resolutions are also supported, such as 2K/120Hz Quad HD or 1080p/240Hz Full HD, as well as multichannel audio transmission through HDMI. Thanks to HDR support, you can enjoy a significantly expanded range of colours and contrasts. The Gigabit network card extends your computer with a fast and stable network connection, adds the missing RJ-45 Ethernet connector, or provides another network card. The aluminum body not only looks great, but also provides mechanical durability and passive cooling. Thanks to the rubber pad on the base, the station stays firmly in place. The USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. Thanks to the Plug & Play and Hot Plug functions, connecting the hub is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. For the proper function of the hub, the USB-C port of your notebook must support video output (DisplayPort Alternate Mode or Thunderbolt 3 and above) and Power Delivery power. The hub can easily handle connection to phones and tablets with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV, or projector to the phone. Input (connection to a computer, tablet, or phone): USB 10 Gbps (USB 3.2 Gen 2), USB-C male connector. Compatible with USB 5Gbps, USB 20Gbps, USB 40Gbps, Thunderbolt 3/4/5. Input (power supply): USB Power Delivery 3.0 100 W, USB-C female connector. Charging of the laptop from the power adapter via USB-C hub. PD power must be supported by the laptop (tablet, phone), the cable, and the wall charger. Wireless charging: Supports 5 W, 7.5 W, 10 W, and 15 W wireless charging. Compatible with Qi1, Qi2, and Apple MagSafe technologies. Supports magnetic alignment for efficient charging. A 100 W PD charging adapter must be used to achieve maximum wireless charging performance. Examples of compatible Qi1 and Qi2 wireless charging phones: Apple iPhone: Compatible with iPhone 8 to 17 models, including the X, 11, 12, 13, 14, 15, 16, and 17 series, and all mini, Plus, Air, Pro, and Pro Max variants. Samsung Galaxy: Compatible with Samsung Galaxy S8 to S25 models, including the S, S+, S Ultra, Z Flip (Flip3Flip6), and Z Fold (Fold3Fold6) series. Google Pixel: Compatible with Google Pixel 4 to 10 models, including the Pixel 4 XL, 6 Pro, 7 Pro, 8 Pro, 9 Pro, 10 Pro, and Pixel Fold. Note: To achieve the highest charging speed, the phone needs to be properly centred. Thanks to the magnetic ring in the device or its case, the smartphone easily aligns itself into the optimal position. USB outputs: 1× USB 480Mbps port, USB-A female connector. 2× USB 10Gbps port, USB-A female connector. 1× USB 10Gbps port, USB-C female connector. The USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) from the hub's USB-A and USB-C ports. Video output: 1× DP port, DP female connector. 1× HDMI port, HDMI A female connector. Maximum supported resolution: 1 monitor (DP) up to 8K/30Hz Ultra HD, 4K/60Hz Ultra HD, 2K/120Hz Quad HD, 1080p/240Hz Full HD. 1 monitor (HDMI) up to 4K/60Hz Ultra HD, 2K/120Hz Quad HD, 1080p/240Hz Full HD. 2 monitors (DP + HDMI) up to 4K/60Hz Ultra HD, 2K/120Hz Quad HD, 1080p/240Hz Full HD. Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60 Hz. To achieve maximum resolution and frequency values on video outputs, the hub must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 3. A suitable updated OS and up-to-date graphics drivers are also required. HDR support (High Dynamic Range, 10-bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection). HDMI support for 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio formats. HDMI support for sampling rates up to 192 kHz and up to 24-bit audio depends on the source and destination device, i.e., notebook/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface: 10/100/1000 Mb/s. Supported IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Other features: Possibility to connect your device while running thanks to Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus USB bus power. Power supply via PD charger (not included). The LED indicates the connection of the dock to the computer with a steady glow. High-quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions: 84 × 84 × 140 mm (W × D × H). Weight: 440 g (without cable). USB-C to USB-C cable length 60 cm for connecting the dock to a laptop. Supported operating systems: Windows 10 / 11, macOS, Linux, iPadOS, iOS, Chrome OS, and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from the device (laptop, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of the drivers. Package contains: USB-C docking station, USB-C to USB-C cable, length 60 cm, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.