• Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key B or key B+M based on SATA • Maximum height of the components on the module: 1.5 mm, application of double-sided assembled modules supported • Supports Native Command Queuing (NCQ) • Supports S.M.A.R.T • Supports TRIM • Supports DevSleep • Hot Swap • Bootable
Tootekood: 42633GTIN: 4043619426331Disk drive docks and cases
Dieses Gehäuse von Delock ermöglicht den Einbau einer M.2 PCIe NVMe SSD oder einer M.2 SATA SSD im 2280, 2260, 2242 und 2230 Format. Es kann über USB an einen PC oder ein Notebook angeschlossen werden. Das robuste Metallgehäuse sorgt für eine optimale Temperatur des Speichers. Der große Vorteil an diesem Delock M.2 Gehäuse ist, dass sowohl SATA als auch PCIe (NVMe) M.2 SSDs in das Gehäuse eingesetzt werden können. Der Speicher wird vom Chipsatz automatisch erkannt und kann daraufhin verwendet werden.
Delock external USB Type-C combo enclosure for M.2 NVMe PCIe or SATA SSD (black, tool-free)
Tootekood: 42638GTIN: 4043619426386Disk drive docks and cases
This enclosure from Delock allows you to install either an M.2 PCIe NVMe SSD or an M.2 SATA SSD in 2280, 2260, and 2242 formats. It can be connected to a PC or notebook via USB. The sturdy metal housing with cooling fins ensures optimal temperature for the storage device. A major advantage of this Delock M.2 enclosure is that both SATA and PCIe (NVMe) M.2 SSDs can be used. The chipset automatically detects the storage device, which can then be used immediately.
Delock M.2 heatsink for SSD 2280 (black, with RGB LED)
Tootekood: 18460GTIN: 4043619184606M.2 Coolers
The Delock heatsink for M.2 SSDs ensures reliable heat dissipation and supports an optimal operating temperature for the SSD. The combination of pure copper and aluminium enables efficient dissipation of the generated heat, making the heatsink a high-performance solution for demanding systems. The heatsink is mounted directly around the M.2 SSD. The integrated thermal pads transfer the heat generated by the SSD to the heatsink, where it is effectively dissipated. For an aesthetically pleasing gaming atmosphere, the top features an integrated LED light strip. This can be connected to the mainboard and synchronized with the PC's existing ARGB lighting.TypeM.2 heatsinkColourblackEAN4043619184606Manufacturer No.18460TypeHeatsinkUseHeatsink for M.2 SSD 2280FeaturesLED lightingLED lightingYes, addressable RGB headerLED lighting colourRGBHeatsink materialAluminium, copperHeatpipe connections2 pcs.Further informationConnection: 1 x ARGB 5 V 3-pin LED connector, 1 x SATA 15-pin plugAccessories includedLED connection cable, length approx. 60 cm, operating instructions, screwsOverall dimensionsWidth: 26 mm x Height: 34 mm x Depth: 83 mm
Tootekood: 42594GTIN: 4043619425945Disk drive docks and cases
Dieses Gehäuse von Delock ermöglicht den Einbau einer M.2 SSD im 2242 und 2230 Format, und kann via USB Typ-A an einen PC oder ein Notebook angeschlossen werden. Mit Hilfe der Tasten auf der Oberseite ist es möglich eine verschlüsselte Partition auf dem eingesetzten Speicher zu erstellen.TypLaufwerksgehäuseFarbegrau/schwarzEAN4043619425945Hersteller-Nr.42594MaterialKunststoff, AluminiumGeeignet fürPC-SystemAnschlüsse extern1x USB-B 3.2 Gen 1 (5 Gbit/s)Anschlüsse internM.2Anschlüsse internDie Bezeichnung USB 3.2 Gen 1 entspricht der früheren Bezeichnung USB 3.1 Gen 1 / USB 3.0.InterfaceSATAChipsatzInitio INIC3607Rückseite1 x USB 3.0 Typ Micro-B BuchseAnmerkungenintern: 1 x 67 Pin M.2 Key B Slot, unterstützt M.2 Module im Format 2242 und 2230 mit Key B oder Key B+M auf SATA Basis, maximale Höhe der Komponenten auf dem Modul: 1,35 mm, Verwendung von zweiseitig bestückten Modulen möglich, Datentransferrate bis zu 5 Gbps, 12 Tasten, LED-Anzeige, Verschlüsselungsverfahren: AES-256, Hot Plug, Plug & PlayKompatibel mitLinux, Windows 7, Windows 8, Windows 8.1, Windows 10Weitere InformationenSystemvoraussetzungen: PC oder Notebook mit einem freien USB Typ-A PortZubehör vorhandenBedienungsanleitung, 1x Kabel USB A Stecker zu USB Micro-B Stecker (Länge ca. 50 cm), 1x Schraube, SchraubendreherAbmessungenBreite: 50 mm x Höhe: 13 mm x Tiefe/Länge: 93 mmGewicht50 Gramm
This PCI Express card by Delock expands the PC with three M.2 slots. Up to two M.2 SATA modules in 2280, 2260, 2242, or 2230 format and one M.2 PCIe module in 2280, 2260, 2242, or 2230 format can be installed on this card. The SATA modules are connected to the motherboard via SATA cable.
Tootekood: 62551GTIN: 4043619625512Data cables and adapters
With this Delock converter, you can connect an M.2 NGFF SSD in the 2280, 2260, 2242 and 2230 formats. The converter can be integrated into the system internally via the SATA 22-pin interface.TypeConverterEAN4043619625512Manufacturer No.62551Controller typeM.2Internal connections1x M.2Further informationSupports M.2 NGFF modules in the 2280, 2260, 2242 and 2230 format with Key B or Key B+M to SATA; Maximum component height on the module: 1.35 mm, double-sided assembly possible; bootable, dimensions (LxWxH): approx. 100 x 51 x 5 mm; OS independent, no driver installation requiredDimensionsWidth: 100 mm x Height: 51 mm x Depth/Length: 5 mmWeight59 grams
Tootekood: DA-71118GTIN: 4016032457688Data cables and adapters
With the DIGITUS 2.5" SATA HDD enclosure, you can increase system speed and performance cost-effectively by installing an M.2 or mSATA SSD in your PC or notebook. The hard disk adapter is used like a standard 2.5" hard disk with SATA III connection. Due to the low installation height of only 7 mm, it can be installed in all common notebooks. The built-in SSD is selected via DIP switch on the board. Boot processes are supported by the adapter for all standard operating systems such as Windows, Mac OS or Linux. The internal SSD memory is protected from dust and damage by the completely closed aluminum housing. The SATA III interface offers a data transmission speed of 6 Gbit/s, the reading speed can be up to 520 MB/s, depending on the SSD used.
GTIN: 4016032457688Arvuti riistvara > Andmesalvestus > Kettakorpused ja ümbrised
Specifikacijos. Gross depth (mm). 100.00 mm. Gross height (mm). 15.00 mm. Gross weight. 0.12 kg. Gross width (mm). 120.00 mm. Net weight. 0.1 kg. Packing quantity. 1.00 dalių. Paper/Pasteboard. 16.00 g. Plastic (No PET). 4.00 g. Tare weight (kg). 0.02 kg. Volume (m3). 0.00 m³. Embeeded battery. No. WEEE tax. Yes. WEEE tax. CL109:6:2017-04-01. Producer. Digitus. Palette Qty. 9600 dalių. Gamintojo prekės modelio pavadinimas. DA-71118. Gamintojo prekės serija. 2.5" SATA HDD Enclosure M.2 or mSATA. Warranty. 24 mėn. Pagrindinės savybės Digitus 2.5" SATA HDD Enclosure M.2 or mSATA | DA-71118
Die 3-in-1 Docking Station von DIGITUS unterstützt M.2 SSDs in NVMe- oder SATA-Technologie, zusätzlich ist ein SD-Express 7.1 Kartenlesegerät verbaut. Es lassen sich M.2 Datenträger mit bis zu 4 TB je Einschub und zusätzlich SD-Karten bis 2 TB verwalten. Unterstützt werden NVMe SSDs mit B+M Key & M-Key sowie SATA SSDs mit B+M-Key, jeweils in den Formaten 2242, 2260, 2280 & 22110.TypDockingstationFarbeschwarzEAN4016032501398Hersteller-Nr.DA-71546-1Anschlüsse1x USB-C 3.2 Gen 2 (10 Gbit/s)StromversorgungUSB-BetriebFeature1 x M.2 Schacht für NVMe SSDs (B+M-Key / M-Key), 1 x M.2 Schacht für SATA SSDs (B+M-Key), 1 x SD-Express 7.1 Speicherkartenleser 2 TB max. / 1000 MB/s max.Weitere InformationenUnterstützte Formate: 2242, 2260, 2280 & 22110Warn- und SicherheitshinweiseSicherheitshinweise:Überlastung kann zu Überhitzung und Schäden am Gerät oder an der angeschlossenen Peripherie führen. Nutzen sie falls erforderlich eine eine externe Stromversorgung hat, um eine stabile Leistung zu gewährleisten. Wenn Geräte wie externe Festplatten oder Drucker angeschlossen werden, die eine hohe Stromaufnahme benötigen, sollte das Gerät mit einer externer Stromversorgung verwendet werden. Ansonsten könnte das Gerät überlastet werden oder es könnten Funktionsproblem auftreten. Setzen Sie das Gerät nicht Regen, Feuchtigkeit, Dämpfen oder Flüssigkeiten aus. Führen Sie keine Gegenstände in das Gerät ein. Versuchen Sie nicht, die Einheit eigenmächtig zu reparieren oder das Gehäuse zu öffnen. Sie riskieren elektrischen Schlag! Sorgen Sie für ausreichende Belüftung, um Schäden durch Überhitzung zu vermeiden. Staub, Feuchtigkeit, Dämpfe sowie starke Reinigungs- oder Lösungsmittel können Schäden am Gerät verursachen. Trennen Sie das Gerät vor der Säuberung von der Stromversorgung und den verbundenen Geräten. Säubern Sie das Gerät mit einem staubfreien Tuch.
Tootekood: DA-71156GTIN: 4016032497561Disk drive docks and cases
The DA-71156 USB HDD Enclosure offers a versatile and efficient storage solution for NVMe and SATA SSDs. Supporting M.2 modules in 2230, 2242, 2260, and 2280 form factors and a maximum capacity of up to 8TB, it is compatible with a wide range of SSDs. Data transfer speeds are up to 10Gbps for NVMe and 6Gbps for SATA, and the USB 3.1 Gen2 interface is backward compatible with USB 3.1, 3.0, 2.0, and 1.1. The tool-free design enables easy installation, and the robust JMS581DL chipset ensures reliable and efficient operation. An integrated LED indicator makes it easy to monitor the status of the SSD, and the durable Pantone 430C aluminum housing provides excellent passive heat dissipation. With its compact dimensions of 101x32x10 mm and a weight of only 97 g, the case is ideal for mobile use. It supports plug-and-play and is powered directly by USB. The case is compatible with Windows (11, 10, 8, 7, XP, 2000), macOS, Linux (2.4.x or later), Google Chrome OS (9.x or later), Android and iOS and offers comprehensive support for USB-C products. Wide Compatibility: Supports M.2 modules in 2230, 2242, 2260, and 2280 formats, compatible with a wide range of SSDs Large Capacity: Offers up to 8TB of storage space for all your files and data Fast Data Transfer: 10Gbps data transfer speed (6Gbps for SATA) ensures fast file transfers and smooth operation USB 3.1 Gen 2 Interface: Latest USB technology with backward compatibility to USB 3.1, 3.0, 2.0, and 1.1 Plug and Play: Simply connect via USB and start working straight away Multi-platform support: Compatible with Windows, macOS, Linux, Google Chrome OS, Android, and iOS Robust Chipset: JMS581DL chipset for reliable and efficient operation LED Activity Indicator: Integrated LED indicator to monitor the status of the SSD Durable and Stylish: Pantone-colored aluminum housing 430C with excellent passive heat dissipation Portable design: Compact and lightweight with dimensions of 101x32x10 mm and weight of only 97 g
Manage M.2 NVMe and M.2 SATA SSDs via USB-C The DIGITUS SSD docking station enables the installation of M.2 SSD drives of the NVMe or SATA standard with a capacity of up to 4 TB. NVMe SSDs with B+M Key & M-Key and SATA SSDs with B+M-Key are supported, each in 2242, 2260, 2280 & 22110 formats. Easily expand the storage capacity of numerous USB-C devices, such as computers, notebooks, TV equipment, consoles and routers. SATA M.2 support. NVMe SSD with B+M key and NVMe SSD with M key Supported formats: 2242, 2260, 2280 and 22110 Supports NVMe SSDs and SATA SSDs with a capacity of up to 4 TB High data transmission speed - up to 10 Gbps (U.A.S.P + T.R.I.M support) Data storage formats: NTFS, FAT, FAT32 USB-C connector: USB 3.2 Gen2 Systems: Windows 11/10/8/8.1/7/XP, macOS 10.0 or later Perfect memory expansion for notebooks, PCs, consoles, TV equipment, NAS and routers (USB-C) Plug and Play - no drivers required
This PCIe x4 adapter card is suitable for M.2 / NGFF storage devices (NVMe) with B, M, or B+M key, and supports sizes 2230, 2242, 2260, and 2280. With its x4 interface and PCIe 3.0 standard, data transfers of up to 6 Gbps (32 GT/s) are possible. Storage devices can be connected via the integrated SATA interface for M.2 SATA SSDs or via the PCIe interface for NVMe PCIe SSDs. Go into turbo mode with the multifunctional M.2 PCIe 3.0 add-on card from DIGITUS.
The DIGITUS docking station, with space for two M.2 NVMe SSDs (up to 4 TB per slot), offers fast data transfer and an integrated offline cloning function that allows you to easily duplicate storage media with the touch of a button.Manage M.2 NVMe and M.2 SATA SSDs via USB-C. Dual NVMe Storage - Supports two M.2 SSDs up to 4TB each for maximum storage capacity Offline Clone Function - Clone data without a computer, simply by pressing a button Lightning-fast USB 3.2 Gen2 connection with speeds up to 10Gb/s Extensive Compatibility - Supports M-Key and B+M-Key NVMe SSDs in 2242, 2260, 2280, and 22110 formats Universal - Ideal for PCs, notebooks, NAS, smart TVs, game consoles, and USB-C routers Easy to Use - Plug & Play without driver installation for immediate use Hot-swap support: Insert and remove SSDs while running LED Displays: Clone Progress (25%, 50%, 75%, 100%)
7-in-1 DockingStationwith magnetic M.2 NVMe and SATA SSD enclosure and built-in cooling fanM.2 NVMe and SATA - This DockingStation combines powerful connectivity with fast external storage by integrating a high-speed M.2 NVMe and SATA SSD enclosure. Supporting capacities up to 8 TB, its a practical solution for handling large files, backups, or media librariesall from one compact, all-in-one device on your desk. Connectivity for Work and Play - Equipped with USB Type-C and USB Type-A (Gen 2) ports offering transfer rates up to 10 Gbit/s, this DockingStation handles fast data transfers with ease. It also features an HDMI port for 4K@60 Hz displays and SD/microSD slots supporting speeds up to 104 MB/s. Magnetic Attachment Features a magnetic cover that allows it to attach securely to the back of your phone or other compatible devices. This makes it incredibly convenient for users who need extra storage on the go Power Delivery 3.0 - Stay powered throughout the day with a USB Type-C PD-IN port that supports up to 100 watts of power delivery. Simply connect your USB Type-C power supply to keep your DockingStation and connected devices charged without needing extra adapters or cluttering your workspace. Operating System - Whether youre working on Windows, macOS, or Linux, this DockingStation fits into your existing setup. Its designed to work with a wide range of devices and system environments, so you can switch between workstations without worrying about compatibility or needing separate accessories for each system.
GTIN: 8595247909367Arvuti riistvara > Arvuti lisatarvikud > Adapterid, USB-jaoturid
AXAGON ADSA-M2C22 on USB-C 20Gbps dokkimisjaam kahele M.2 NVMe või SATA SSD-kettale. Sellel on ketaste kloonimise funktsioon, mida saab kasutada ilma arvutita, ning must korpus. Seade on mõeldud kahe M.2 NVMe/SATA SSD ühendamiseks USB-C kaudu. Toetatud ketaste täpseid mõõte, kloonimise kestust ja kaabli komplekti kohta andmeid ei ole esitatud. Toote põhiomadused Mudel: ADSA-M2C22 Liides: USB-C 20Gbps Ketaste arv: 2 Ühilduvus: M.2 NVMe ja SATA SSD Kloonimine: ilma arvutita Värvus: must Netokaal: 0,25 kg Tehnilised andmed Pakendis on 1 toode. Sisseehitatud akut ei ole. Tootja on AXAGON.