Kõik hinnakirjad

ROG STRIX Z890-A GAMING WIFI Intel® Z890 LGA 1851 ATX motherboard, Advanced AI PC-ready, 16+1+2+2 power stages, DDR5 slots, DIMM Flex, AEMP III, WiFi 7 with ASUS WiFi Q-Antenna, five M.2 slots, one PCIe® 5.0 NVMe® SSD slot with M.2 Q-release, PCIe 5.0 x16 SafeSlot with PCIe Slot Q-Release Slim, and full support for next-gen graphics card, two Thunderbolt™ 4 ports, USB 10Gbps Type-C®rear I/O port with up to 30-watt Power Delivery fast charging, NPU Boost, ASUS AI Advisor, AI Overclocking, AI Cooling II, AI Networking II and Polymo LightingReady for Advanced AI PCs: Designed for the future of AI computing, with the power and connectivity needed for demanding AI applications Intel® LGA 1851 Socket: Ready for Intel® Core™ Ultra processors (Series 2) Exclusive AI Technologies: NPU Boost, ASUS AI Advisor, ASUS-exclusive AI Overclocking, AI Cooling II, AI Networking II Exclusive Memory Technologies: DIMM Fit, DIMM Flex and AEMP III to simplify setup and improve performance Robust Power Solution: 16(90A)+1(90A)+2(90A)+2(80A) power stages with ProCool II power connectors, MicroFine alloy chokes and premium metallic capacitors Optimized Thermal Design: Massive heatsinks with integrated I/O cover, high-conductivity thermal pads, and connected with an L-shaped heatpipe Latest M.2 Support: One PCIe® 5.0 M.2 slots and four PCIe 4.0 M.2 slots, all with substantial cooling solutions Abundant Connectivity: Dual Thunderbolt™ 4 USB Type-C® ports, USB 10Gbps Type-C rear I/O port with up to 30-watt Power Delivery fast charging plus USB Wattage Watcher, five additional USB 10Gbps ports, PCIe 5.0 x16 SafeSlot, and full support for next-gen graphics card, HDMI™ 2.1 and DisplayPort™ 1.4 High-Performance Networking: On-board Intel Wi-Fi 7 (802.11be) with ASUS WiFi Q-Antenna, Intel 2.5 Gb Ethernet DIY-Friendly Design: PCIe Slot Q-Release Slim, new M.2 Q-Latch, M.2 Q-Release, M.2 Q-Slide, Q-Antenna, BIOS Q-Dashboard, Q-LED, FlexKey button, Start button, BIOS FlashBack™ button, Clear CMOS button and pre-mounted I/O shield Immersive Audio: ROG SupremeFX ALC4080 codec with Savitech SV3H712 amplifier, along with Dolby Atmos® Unmatched Personalization: I/O cover with Polymo Lighting, three Gen 2 ARGB headers, all configurable with ASUS-exclusive Aura Sync RGB lighting Renowned Software: ASUS DriverHub, Dolby Atmos®, TurboV Core, GlideX, HWiNFO, bundled 60-days AIDA64 Extreme subscription and intuitive UEFI BIOS dashboard

ROG STRIX Z890-E GAMING WIFI Intel® Z890 LGA 1851 ATX motherboard, Advanced AI PC-ready, 18+1+2+2 power stages, DDR5 slots with NitroPath DRAM Technology, DIMM Fit, DIMM Flex, AEMP III, WiFi 7 with ASUS WiFi Q-Antenna, seven M.2 slots, three PCIe® 5.0 NVMe® SSD slots, PCIe 5.0 x16 SafeSlot with PCIe Slot Q-Release Slim, and full support for next-gen graphics card, two Thunderbolt™ 4 ports, USB 10Gbps Type-C®rear I/O port with up to 30-watt Power Delivery fast charging, NPU Boost, ASUS AI Advisor, AI Overclocking, AI Cooling II, AI Networking II and Polymo LightingReady for Advanced AI PCs: Designed for the future of AI computing, with the power and connectivity needed for demanding AI applications Intel® LGA 1851 Socket: Ready for Intel® Core™ Ultra processors (Series 2) Exclusive AI Technologies: NPU Boost, ASUS AI Advisor, ASUS-exclusive AI Overclocking, AI Cooling II, AI Networking II Exclusive Memory Technologies: DIMM Fit, DIMM Flex and AEMP III to simplify setup and improve performance Robust Power Solution: 18(110A)+1(90A)+2(90A)+2(80A) power stages with ProCool II power connectors, MicroFine alloy chokes and premium metallic capacitors Optimized Thermal Design: Massive heatsinks with integrated I/O cover, high-conductivity thermal pads, and connected with an C-shaped heatpipe Latest M.2 Support: Three PCIe® 5.0 M.2 slots and four PCIe 4.0 M.2 slots, all with substantial cooling solutions Abundant Connectivity: Dual Thunderbolt™ 4 USB Type-C® ports, USB 10Gbps Type-C rear I/O port with up to 30-watt Power Delivery fast charging plus USB Wattage Watcher, ten USB 10Gbps ports, PCIe 5.0 x16 SafeSlot with full support for next-gen graphics card, HDMI™ 2.1 and DisplayPort™ 1.4 High-Performance Networking: On-board Intel Wi-Fi 7 (802.11be) with ASUS WiFi Q-Antenna, Realtek 5 Gb Ethernet DIY-Friendly Design: PCIe Slot Q-Release Slim, new M.2 Q-Latch, M.2 Q-Release, M.2 Q-Slide, Q-Antenna, BIOS Q-Dashboard, Q-Code, Q-LED, FlexKey button, Start button, BIOS FlashBack™ button, Clear CMOS button and pre-mounted I/O shield Immersive Audio: ROG SupremeFX ALC4080 codec with Savitech SV3H712 amplifier, along with Dolby Atmos® Unmatched Personalization: I/O cover with Polymo Lighting, three Gen 2 ARGB headers, all configurable with ASUS-exclusive Aura Sync RGB lighting Renowned Software: ASUS DriverHub, Dolby Atmos®, TurboV Core, GlideX, HWiNFO, bundled 60-days AIDA64 Extreme subscription

ROG STRIX Z890-F GAMING WIFI Intel® Z890 LGA 1851 ATX motherboard, Advanced AI PC-ready, 16+1+2+2 power stages, DDR5 slots, DIMM Flex, AEMP III, WiFi 7 with ASUS WiFi Q-Antenna, five M.2 slots, one PCIe® 5.0 NVMe® SSD slot with M.2 Q-release, PCIe 5.0 x16 SafeSlot with PCIe Slot Q-Release Slim, and full support for next-gen graphics card, two Thunderbolt™ 4 ports, USB 10Gbps Type-C® rear I/O port with up to 30-watt Power Delivery fast charging, NPU Boost, ASUS AI Advisor, AI Overclocking, AI Cooling II, AI Networking II and Polymo LightingReady for Advanced AI PCs: Designed for the future of AI computing, with the power and connectivity needed for demanding AI applications Intel® LGA 1851 Socket: Ready for Intel® Core™ Ultra processors (Series 2) Exclusive AI Technologies: NPU Boost, ASUS AI Advisor, ASUS-exclusive AI Overclocking, AI Cooling II, AI Networking II Exclusive Memory Technologies: DIMM Fit, DIMM Flex and AEMP III to simplify setup and improve performance Robust Power Solution: 16(110A)+1(90A)+2(90A)+2(80A) power stages with ProCool II power connectors, MicroFine alloy chokes and premium metallic capacitors Optimized Thermal Design: Massive heatsinks with integrated I/O cover, high-conductivity thermal pads, and connected with an L-shaped heatpipe Latest M.2 Support: One PCIe® 5.0 M.2 slot and four PCIe 4.0 M.2 slots, all with substantial cooling solutions Abundant Connectivity: Dual Thunderbolt™ 4 USB Type-C® ports, USB 10Gbps Type-C rear I/O port with up to 30-watt Power Delivery fast charging plus USB Wattage Watcher, five additional USB 10Gbps ports, PCIe 5.0 x16 SafeSlot with full support for next-gen graphics card, HDMI™ 2.1 and DisplayPort™ 1.4 High-Performance Networking: On-board Intel Wi-Fi 7 (802.11be) with ASUS WiFi Q-Antenna, Intel 2.5 Gb Ethernet DIY-Friendly Design: PCIe Slot Q-Release Slim, new M.2 Q-Latch, M.2 Q-Release, M.2 Q-Slide, Q-Antenna, BIOS Q-Dashboard, Q-LED, Start button, BIOS FlashBack™ button, Clear CMOS button and pre-mounted I/O shield Immersive Audio: ROG SupremeFX ALC4080 codec with Savitech SV3H712 amplifier, along with Dolby Atmos® Unmatched Personalization: I/O cover with Polymo Lighting, three Gen 2 ARGB headers, all configurable with ASUS-exclusive Aura Sync RGB lighting Renowned Software: ASUS DriverHub, Dolby Atmos®, TurboV Core, GlideX, HWiNFO, bundled 60-days AIDA64 Extreme subscription

Game TUF. Built to Last. ASUS TUF Gaming GeForce RTX™ 5080 NVIDIA Blackwell architecture is elevated by enhanced cooling and power delivery, fortified with rugged reinforcements for exceptional durability. Lock, load and dominate with the TUF Gaming GeForce RTX™ 5080, designed to withstand the harshest conditions and deliver unparalleled performance.Military-Grade Components: Premium durabilityProtective PCB Coating: Against moisture and debrisLarge Vapor Chamber: 3.6-slot design with optimal heat transferAxial-Tech Fans: Up t 23% more air than standard fansPhase-Change GPU Thermal Pad: Optimal heat dissipation for GPU longevityDual BIOS: Toggle Quiet or Performance modeGPU TWEAK III: Ultimate GPU tuning utilityGeForce RTX 50 Series GPUs deliver game-changing performance, power transformative AI experiences, and enable creators to complete workflows in record time. RTX IT'S' ON, DLSS 4, Ray Tracing, Reflex 2, AI PC, NVIDIA Studio

GeForce RTX 5070Ti TUF GAMING OC WHITE GDDR7 256-bit 3DP/2HDMI Graphics Card ASUS TUF Gaming GeForce RTX 5070 Ti White Edition The NVIDIA Blackwell architecture is enhanced with upgraded cooling and power delivery, as well as reinforced components for exceptional durability. Lock, load, and dominate with the TUF Gaming GeForce RTX 5070 Ti White Edition, designed to withstand the toughest conditions while delivering unparalleled performance. The Perfect Platform for Gamers and Content Creators 5th-Generation Tensor Cores Maximum AI performance with FP4 and DLSS 4 New Streaming Multiprocessors Optimized for neural shading workloads 4th-Generation Ray Tracing Cores Engineered for optimal geometry Cooling Mastery The advanced cooling design leverages ASUS MaxContact manufacturing technology, a phase-change GPU thermal pad, and efficient Axial-tech fans, delivering superior thermal performance, optimized airflow, and quiet operation all housed in a robust, ventilated metal exoskeleton. Front angled view of the TUF Gaming GeForce RTX 5070 Ti White Edition showing triple fans and ARGB lighting Ideal Power Supply for GeForce RTX 50-Series SystemsTUF Gaming Gold power supplies are perfectly matched for TUF Gaming GeForce RTX 50-series cards, offering exceptional durability and reliable power delivery. Built with high-quality components and military-grade capacitors, they ensure peak system performance even during the most demanding gaming sessions. Best-in-Class Ray Tracing and AI Solutions RTX is the most advanced platform, offering full support for ray tracing and neural rendering technologies that revolutionize how we play and create content. Over 700 games and applications leverage RTX technology, delivering stunningly realistic graphics and incredibly fast performance with cutting-edge AI features such as DLSS Multi-Frame Generation.

<div class="contents" style="margin: 0px; padding: 0px; border: 0px; outline: 0px; font-size: 13px; vertical-align: baseline; background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; zoom: 1; color: rgb(51, 51, 51); font-family: Arial, Helvetica, sans-serif;"> <span style="font-size:14px;">TDA7294V on DMOS-helivõimendi koos mute- ja standby-funktsiooniga Multiwatt15V pakendis. See seade on mõeldud kasutamiseks heli AB-klassi võimendajana Hi-Fi välitingimustes. See on võimeline andma kõrgeimat võimsust nii 4ohm- kui ka 8ohm-koormustele isegi halva toitepinge reguleerimise korral, millel on kõrge toitepinge tõrjumine. Sisseehitatud mute-funktsioon koos sisselülitusviivitusega lihtsustab kaugjuhtimist, vältides sisselülitus- ja väljalülitusmüra.</span></div> <div class="featuresList" id="fnb_features" style="margin: 10px 0px; padding: 0px; border: 0px; outline: 0px; font-size: 13px; vertical-align: baseline; background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; zoom: 1; color: rgb(51, 51, 51); font-family: Arial, Helvetica, sans-serif;"> <ul class="firstList" style="margin: 0px; padding: 0px 0px 0px 20px; border: 0px; outline: 0px; vertical-align: baseline; background: transparent; list-style: none; overflow: hidden; column-count: 2; break-inside: avoid-column; zoom: 1;"> <li style="margin: 0px 0px 6px 12px; padding: 0px; border: 0px; outline: 0px; vertical-align: baseline; background: transparent; list-style: disc; zoom: 1;"> High output current capability</li> <li style="margin: 0px 0px 6px 12px; padding: 0px; border: 0px; outline: 0px; vertical-align: baseline; background: transparent; list-style: disc; zoom: 1;"> Very high operating voltage range from ±10 to ±40V</li> <li style="margin: 0px 0px 6px 12px; padding: 0px; border: 0px; outline: 0px; vertical-align: baseline; background: transparent; list-style: disc; zoom: 1;"> High output power up to 100W (music power)</li> <li style="margin: 0px 0px 6px 12px; padding: 0px; border: 0px; outline: 0px; vertical-align: baseline; background: transparent; list-style: disc; zoom: 1;"> Input bias current of 500nA</li> <li style="margin: 0px 0px 6px 12px; padding: 0px; border: 0px; outline: 0px; vertical-align: baseline; background: transparent; list-style: disc; zoom: 1;"> Quiescent current of 30mA</li> <li style="margin: 0px 0px 6px 12px; padding: 0px; border: 0px; outline: 0px; vertical-align: baseline; background: transparent; list-style: disc; zoom: 1;"> Slew rate of 10V/µs</li> <li style="margin: 0px 0px 6px 12px; padding: 0px; border: 0px; outline: 0px; vertical-align: baseline; background: transparent; list-style: disc; zoom: 1;"> Frequency response (-3dB) range from 20Hz to 20KHz</li> <li style="margin: 0px 0px 6px 12px; padding: 0px; border: 0px; outline: 0px; vertical-align: baseline; background: transparent; list-style: disc; zoom: 1;"> Short circuit protection and thermal shutdown</li> <li style="margin: 0px 0px 6px 12px; padding: 0px; border: 0px; outline: 0px; vertical-align: baseline; background: transparent; list-style: disc; zoom: 1;"> Very low noise and distortion</li> <li style="margin: 0px 0px 6px 12px; padding: 0px; border: 0px; outline: 0px; vertical-align: baseline; background: transparent; list-style: disc; zoom: 1;"> Operating ambient temperature range from 0°C to 70°C</li> </ul> </div>

AXAGON CLR-M2L6 ALU passive heatsink for ideal cooling of high performance M.2 SSDs, especially NVMe. The universal passive heatsink can be used for M.2 cards, size 22 x 80 mm. Two supplied thermally conductive pads allow cooler installation for all one-sided as well as double-sided M.2 SSD disks. 6mm high ribbed aluminum heatsink assists in a better dissipation of heat generated during the M.2 SSD operation. It also reduces the drive temperature by up to 20°C. This prolongs the M.2 SSD life and prevents disk slow down, so-called "Thermal Throttling". Thanks to its easy installation and compact dimensions, the heatsink can be used not only with M.2 AXAGON adapters, but also with M.2 (NGFF) slots on motherboards, etc. The heatsink has the ideal profile height / cooling efficiency ratio. Features: Support of M.2 drives of any capacity. Support of both one-sided and double-sided M.2 drives. Support of M.2 drives, size 22 x 80 mm. Support of SATA (AHCI) as well as NVMe (PCI-Express) M.2 drives. Ribbed aluminum heatsink body. 2 thermally conductive pads can be deliberately combined and used for both one-sided and double-sided SSDs. Compact dimensions 77 x 22 x 6 mm. Weight 13 g. Package contains: Passive heatsink, 2 thermally conductive pads, mounting material, packed in a cardboard box with clearly indicated parameters

AXAGON CLR-M2XL ALU passive heatsink for extreme cooling of high performance M.2 SSD disks, especially NVMe. The universal heatsink can be used for M.2 cards with size 22 x 80 mm. Supplied thermally conductive pads allow heatsink installation for all single-sided as well as double-sided M.2 SSD disks. 32mm high ribbed aluminum XL heatsink together with metal bracket assists in optimal dissipation of heat generated during the M.2 SSD operation. It also reduces the drive temperature by up to 40°C. This prolongs the M.2 SSD life and prevents disk slow down, so-called "Thermal Throttling". The heatsink can be used not only with M.2 AXAGON adapters, but also with M.2 (NGFF) slots on motherboards, etc. Thanks to the large cooling surface and the metal frame, the heatsink ideally dissipates heat from both sides of the M.2 disk and thus achieves maximum cooling efficiency. High cooling efficiency makes this heatsink the most powerful AXAGON heatsink model. Features: Support of M.2 drives of any capacity. Support of both single-sided and double-sided M.2 drives. Support of M.2 drives, size 22 x 80 mm. Support of SATA (AHCI) as well as NVMe (PCI-Express) M.2 drives. Ribbed aluminum heatsink body. 3pcs thermally conductive pads can be deliberately combined and used for both single-sided and double-sided SSD disks with different height. Compact dimensions 76 x 24 x 36 mm. Weight 80 g. Package contains: Passive heatsink, metal bracket, 3pcs thermally conductive pads, mounting material and screwdriver, quick guide, packed in a cardboard box. Review - https://www.hwcooling.net/en/axagon-clr-m2xl-only-one-ssd-cooler-can-be-the-best-review/

AXAGON CLR-M2 ALU passive cooler for ideal cooling of high-performance M.2 SSDs. The versatile passive cooler can be used for M.2 cards, size 22 x 80 mm. Three included thermally conductive pads of different thicknesses allow you to install the cooler on both single-sided and double-sided M.2 SSDs. The 8mm aluminum finned cooler helps dissipate the heat generated during M.2 SSD operation, reducing the drive temperature by up to 25°C. Thanks to its easy installation and compact size, the cooler can be used not only with M.2 AXAGON adapters but also with M.2 (NGFF) slots on motherboards, etc. Features: Supports M.2 drives of any capacity. Supports both single-sided and double-sided M.2 drives. Supports M.2 drives, size 22 x 80 mm. Supports both SATA (AHCI) and NVMe (PCI-Express) M.2 drives. Aluminum cooler body. Three thermally conductive pads can be combined and used for both single-sided and double-sided SSDs with various heights. Compact dimensions: 76 x 24 x 10 mm. Weight: 21 g. Package contains: 1 passive cooler, 3 thermally conductive pads, mounting material and a screwdriver, packed in a cardboard box.

AXAGON CLR-M2FAN copper heatsink with fan for perfect cooling of high performance M.2 SSD disks, especially NVMe. The universal heatsink can be used for M.2 cards with size 22 x 80 mm. Supplied thermally conductive pads allow heatsink installation for all single-sided as well as double-sided M.2 SSD disks. Ribbed copper heatsink core with aluminum body is 8.6 mm high. Inside the body, there is a fan with PWM speed control, which is connected to the computer's motherboard with a 4-pin power connector. The fan speed can be automatically controlled by temperature, to save energy or to reduce noise. Copper heatsink with fan together with metal bracket assists in optimal dissipation of heat generated during the M.2 SSD operation. It also reduces the drive temperature by up to 30°C. This prolongs the M.2 SSD life and prevents disk slow down, so-called "Thermal Throttling". The heatsink can be used not only with M.2 AXAGON adapters, but also with M.2 (NGFF) slots on motherboards, etc. Thanks to the metal frame, the heatsink dissipates heat from both sides of the M.2 disk and thus achieves maximum cooling efficiency. Features: Support of M.2 drives of any capacity. Support of both single-sided and double-sided M.2 drives. Support of M.2 drives, size 22 x 80 mm. Support of SATA (AHCI) as well as NVMe (PCI-Express) M.2 drives. Ribbed copper heatsink core, aluminum body. Fan with PWM speed control, 4-pin power connector. 3 pcs thermally conductive pads can be deliberately combined and used for both single-sided and double-sided SSD disks with different height. Compact dimensions 76 x 24 x 12 mm. Weight 45 g. Package contains: Heatsink with fan and fixed 38 cm long power cable, metal bracket, 3 pcs thermally conductive pads, mounting material and screwdriver, packed in a cardboard box. Review - https://www.hwcooling.net/en/axagon-clr-m2fan-active-ssd-cooler-for-closed-off-spaces-review/

<div class="tab-pane fade active show" id="ESpec"> <div class="px-3 py-4 p-sm-4"> <dl class="row"> <dt class="col-sm-4">Product Type</dt> <dd class="col-sm-8">Solid state drive heatsink</dd> <dt class="col-sm-4">Storage Interface</dt> <dd class="col-sm-8">M.2 NVMe Card / SATA</dd> <dt class="col-sm-4">Product Material</dt> <dd class="col-sm-8">Aluminium</dd> <dt class="col-sm-4">Package Content</dt> <dd class="col-sm-8">2 thermal pads, mounting clips</dd> <dt class="col-sm-4">Width</dt> <dd class="col-sm-8">2.2 cm</dd> <dt class="col-sm-4">Depth</dt> <dd class="col-sm-8">7.7 cm</dd> <dt class="col-sm-4">Height</dt> <dd class="col-sm-8">1 cm</dd> <dt class="col-sm-4">Weight</dt> <dd class="col-sm-8">19 g</dd> <dt class="col-sm-4">Features</dt> <dd class="col-sm-8">For M.2 2280 SSD</dd> <dt class="col-sm-4">Shipping Width</dt> <dd class="col-sm-8">4 cm</dd> <dt class="col-sm-4">Shipping Depth</dt> <dd class="col-sm-8">10 cm</dd> <dt class="col-sm-4">Shipping Height</dt> <dd class="col-sm-8">1.6 cm</dd> <dt class="col-sm-4">Shipping Weight</dt> <dd class="col-sm-8">38 g</dd> </dl> </div> </div>

AXAGON CLR-M2L10 ALU passive heatsink for ideal cooling of high performance M.2 SSDs, especially NVMe. The universal passive heatsink can be used for M.2 cards, size 22 x 80 mm. Two supplied thermally conductive pads allow cooler installation for all one-sided as well as double-sided M.2 SSD disks. 10mm high ribbed aluminum heatsink assists in a better dissipation of heat generated during the M.2 SSD operation. It also reduces the drive temperature by up to 25°C. This prolongs the M.2 SSD life and prevents disk slow down, so-called "Thermal Throttling". Thanks to its easy installation and compact dimensions, the heatsink can be used not only with M.2 AXAGON adapters, but also with M.2 (NGFF) slots on motherboards, etc. Thanks to the 10 mm height the cooler achieves maximum cooling efficiency. Features: - Support of M.2 drives of any capacity. - Support of both one-sided and double-sided M.2 drives. - Support of M.2 drives, size 22 x 80 mm. - Support of SATA (AHCI) as well as NVMe (PCI-Express) M.2 drives. - Ribbed aluminum heatsink body. - 2 thermally conductive pads can be deliberately combined and used for both one-sided and double-sided SSDs. - Compact dimensions 77 x 22 x 10 mm. - Weight 19 g. Package contains: - passive heatsink, - 2 thermally conductive pads, - mounting material, - packed in a cardboard box with clearly indicated parameters.

<div class="tab-pane fade active show" id="ESpec"> <div class="px-3 py-4 p-sm-4"> <dl class="row"> <dt class="col-sm-4">Product Type</dt> <dd class="col-sm-8">Solid state drive heatsink</dd> <dt class="col-sm-4">Storage Interface</dt> <dd class="col-sm-8">M.2 NVMe Card / SATA</dd> <dt class="col-sm-4">Product Material</dt> <dd class="col-sm-8">Aluminium</dd> <dt class="col-sm-4">Package Content</dt> <dd class="col-sm-8">2 thermal pads, mounting clips</dd> <dt class="col-sm-4">Width</dt> <dd class="col-sm-8">2.2 cm</dd> <dt class="col-sm-4">Depth</dt> <dd class="col-sm-8">7.7 cm</dd> <dt class="col-sm-4">Height</dt> <dd class="col-sm-8">0.3 cm</dd> <dt class="col-sm-4">Weight</dt> <dd class="col-sm-8">10 g</dd> <dt class="col-sm-4">Features</dt> <dd class="col-sm-8">For M.2 2280 SSD</dd> <dt class="col-sm-4">Shipping Width</dt> <dd class="col-sm-8">4 cm</dd> <dt class="col-sm-4">Shipping Depth</dt> <dd class="col-sm-8">10 cm</dd> <dt class="col-sm-4">Shipping Height</dt> <dd class="col-sm-8">2 cm</dd> <dt class="col-sm-4">Shipping Weight</dt> <dd class="col-sm-8">27 g</dd> </dl> </div> </div>

AXAGON CLR-M2L3 ALU passive heatsink for ideal cooling of high performance M.2 SSDs, especially NVMe. The universal passive heatsink can be used for M.2 cards, size 22 x 80 mm. Two supplied thermally conductive pads allow cooler installation for all one-sided as well as double-sided M.2 SSD disks. 3mm high ribbed aluminum heatsink assists in a better dissipation of heat generated during the M.2 SSD operation. It also reduces the drive temperature by up to 15°C. This prolongs the M.2 SSD life and prevents disk slow down, so-called "Thermal Throttling". Thanks to its easy installation and compact dimensions, the heatsink can be used not only with M.2 AXAGON adapters, but also with M.2 (NGFF) slots on motherboards, etc. Low profile of heatsink allows usage in limited space. Features: • Support of M.2 drives of any capacity. • Support of both one-sided and double-sided M.2 drives. • Support of M.2 drives, size 22 x 80 mm. • Support of SATA (AHCI) as well as NVMe (PCI-Express) M.2 drives. • Ribbed aluminum heatsink body. • 2 thermally conductive pads can be deliberately combined and used for both one-sided and double-sided SSDs. • Compact dimensions 77 x 22 x 3 mm. • Weight 10 g. Package contains: • passive heatsink, • 2 thermally conductive pads, • mounting material, • packed in a cardboard box with clearly indicated parameters.

<div class="tab-pane fade active show" id="ESpec"> <div class="px-3 py-4 p-sm-4"> <dl class="row"> <dt class="col-sm-4">Product Type</dt> <dd class="col-sm-8">Solid state drive heatsink</dd> <dt class="col-sm-4">Storage Interface</dt> <dd class="col-sm-8">M.2 NVMe Card / SATA</dd> <dt class="col-sm-4">Product Material</dt> <dd class="col-sm-8">Aluminium</dd> <dt class="col-sm-4">Package Content</dt> <dd class="col-sm-8">2 thermal pads, mounting clips</dd> <dt class="col-sm-4">Width</dt> <dd class="col-sm-8">2.2 cm</dd> <dt class="col-sm-4">Depth</dt> <dd class="col-sm-8">7.7 cm</dd> <dt class="col-sm-4">Height</dt> <dd class="col-sm-8">0.6 cm</dd> <dt class="col-sm-4">Weight</dt> <dd class="col-sm-8">10 g</dd> <dt class="col-sm-4">Features</dt> <dd class="col-sm-8">For M.2 2280 SSD</dd> <dt class="col-sm-4">Shipping Width</dt> <dd class="col-sm-8">4 cm</dd> <dt class="col-sm-4">Shipping Depth</dt> <dd class="col-sm-8">10 cm</dd> <dt class="col-sm-4">Shipping Height</dt> <dd class="col-sm-8">2 cm</dd> <dt class="col-sm-4">Shipping Weight</dt> <dd class="col-sm-8">27 g</dd> </dl> </div> </div>

M.2-2280 SSD passive cooler, with 20 mm aluminum cooling fins, reduces the temperature by up to 40 °C, various thermal pads with different thicknesses, for single and double-sided M.2 SSD storage.

Fast external AXAGON EEM2-20G ARMORED box with USB 20Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find a USB-C -> USB-C cable to connect the box to your computer. Thanks to the USB 20Gbps interface, the transmission rate is up to 20 Gb/s. To take full advantage of the speed of the box, the controller of the connected device must be compatible with USB 3.2 Gen 2x2. These controllers are typically used in gaming laptops and modern desktop computers. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage of the box is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. Vents on the sides ensure sufficient air circulation. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. Another benefit is the silicone sleeve, which provides better protection of the box against shocks, prevents sliding on the table and ensures a comfortable grip in the hand. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 20Gbps (USB 3.2 Gen 2x2), connector USB-C female. Compatible with USB 5Gbps, USB 10Gbps. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Maximum theoretical supported speeds and compatibility with USB controllers (ports): Laptop / PC with USB 20Gbps (USB 3.2 Gen 2x2) port: max. speed 20 Gbit/s. Laptop / PC with USB 10Gbps (USB 3.2 Gen 2) port: max. speed 10 Gbit/s. Laptop / PC with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0) port: max. speed 5 Gbit/s. Compatible with USB4, Thunderbolt 3/4 ports: max. speed 10 Gbit/s. The real box bandwidth / transmission rate is about 2000 MB/s (2 GB/s), it is given by the limits of the USB 3.2 Gen 2x2 interface. Other features: Supports transmission rates 20.000 / 10.000 / 5.000 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2x2 type C female connector. USB type C male / USB type C male cable length 38 cm in the package. Other data: Box dimensions 15 x 112 x 40 mm (H x W x D). Box weight 83 g (without cable, without disk, without sleeve). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 20Gbps external box for M.2 SSD, silicone sleeve, USB-C USB-C cable 38 cm long, 1 thermal conductive pad, mounting kit and screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Gaming external AXAGON EEM2-GAM M.2 box with USB 10Gbps interface for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find two cables to connect the box to your computer. One USB-C USB-C and the other USB-C USB-A. You can connect the box to any free USB port on the notebook. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. A great advantage is the screwless opening of the box. Just press the button on the side to release the bottom cover. Changing discs is so easy and fast. The stylish frame for M.2 drives will impress you with its premium gaming design in black with an elegant surface that will perfectly highlight your gaming setup. The RGB LED indication adds a stylish look and blends perfectly with any gaming laptop, further enhancing the atmosphere of your gaming environment. Also included is a functional sleeve that protects the box opening button, increases overall protection, and offers a loop for hanging. Aluminum box body and thermal conductive pad provides ideal cooling for the inserted M.2 SSD. This extends the life of the disk and prevents slowing down of the disk speed, so called. Thermal Throttling. Inserting an M.2 SSD into this box easily creates a fast, compact and versatile external drive that can be used not only with PCs and laptops, but also with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with 480Mbps, USB 5Gbps, USB4 a Thunderbolt 3/4. Device support: NVMe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. RGB LED indication. Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Two USB type C or A male / USB type C male cable length 50 cm included in the package. Other data: Box dimensions 13 x 130 x 55 mm (H x W x D). Box weight 105 g (without cable and M.2 disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility is dependent on an updated operating system and support from the device manufacturer. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, protective sleeve, USB-C - USB-C cable 50 cm long, USB-A - USB-C cable 50 cm long, 2 thermal conductive pads, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA packed in a cardboard box with a hanging hole.

Superfast external AXAGON EEM2-GTR THIN RIB box with USB 3.2 Gen 2 interface is designed for NVMe (PCI-Express) M.2 SSD disks. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-C cable enables a reliable connection to a computer. Ribbed body design and thermal conductive pads provides great M.2 SSD disk cooling. This extends its service life and also prevents the disk from slowing down, so-called "Thermal Throttling". Robust box body also protect the disk. SuperSpeed USB 10 Gbit/s interface allows you to enjoy the speed of modern M.2 SSD drives. Due the fast USB 3.2 Gen 2 interface the transmission speed is up to 10Gb/s. NVMe M.2 SSD disk up to 22x80 mm can be used in the external box. The box has no SSD disk capacity limitation. M.2 cards can be single-sided or double-sided. Inserting M.2 SSD disk into this box you will create a fast and compact external drive. The box can be used with computers and laptops, as well as with mobile phones and tablets. Input: USB 3.2 Gen 2 / SuperSpeed+ USB speed up to 10 Gbit/s. Connection via reversible USB type C female connector. Device support: NVMe (PCI-Express) M.2 SSD disks, designed for M-key or B+M-key card formats, NGFF 75-pin M-key slot for NVMe M.2 disks. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.1 Gen1 / USB 3.0 and USB 2.0. Supports transmission rates 10.000 / 5000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Supports M-key or B+M-key NVMe (PCI-Express) M.2 SSD disks without maximum capacity limitation. Supports M.2 drives with a size of 2230, 2242, 2260, 2280 mm. Supports one-sided and double-sided M.2 SSD disks. Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 Specification. Compliant with USB Mass Storage Class Specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is around 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support after 5 minutes of inactivity. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. A blue LED indicating the connection to the USB port (permanent light) and data transmission (blinking). Aluminum ribbed body and thermal conductive pads helps M.2 SSD disk cooling. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Box connected via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 20 cm in the package. Other data: External box dimensions 106 x 43 x 14 mm. External box weight 68 g (without USB cable and M.2 SSD disk). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher, Android (OS and device support required). Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 3.2 Gen 2 external box for NVMe M.2 SSD, USB-C USB-C cable 20 cm long, 2 thermal conductive pads, mounting kit and screwdriver, multilanguage quick guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.

Universal external AXAGON EEM2-GTS2 THIN SCREWLESS box with USB 10Gbps interface for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. The package includes not only a USB-C -> USB-C cable for connecting the box to a computer, but also a USB-C -> USB-A adapter. You can connect the box to any free USB port on the notebook. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Screwless box opening facilitates assembly and disassembly of the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in grey color with an elegant finish, that prevents unwanted fingerprints. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 3.2 Gen 1, USB4 a Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Supports M.2 drives with a size of 2230, 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminum body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable 50 cm long and USB type C female / USB type A male adapter are included. Other data: Box dimensions 112 x 40 x 14 mm. Box weight 48 g (without cable and M.2 SSD disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility is dependent on an updated operating system and support from the device manufacturer. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, USB-C - USB-C cable, 50 cm long with USB-C - USB-A adapter, 1 thermal conductive pad, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The external AXAGON EEM2-SD2 DISPLAY box with a USB 10Gbps interface is designed for M.2 NVMe or SATA SSD drives. Reliable connection to a computer is ensured by a reversible USB-C connector on the box. The package includes not only a USB-C -> USB-C cable for connecting the box to a computer, but also a USB-C -> USB-A adapter. This way, you can connect the box to any available USB port on your notebook. The box is equipped with an advanced LED display that provides an instant overview of your drive's status. It offers several display modes, including detection of the connected drive, the file system used, temperature, drive health, data transfer speed, and operating hours. A detailed graph allows real-time monitoring of the drives temperature, while the sleep mode saves power when idle. With this intelligent monitoring, you will always have your drive under control simply, clearly, and efficiently. Thanks to the USB 3.2 Gen 2 interface, the transfer speed is up to 10 Gb/s. The external M.2 box also supports other modern features such as UASP, TRIM, and allows reading of S.M.A.R.T. information monitoring the condition of the drive. A unique feature, thanks to the used chipset, is the possibility to use both M.2 NVMe and SATA drives. You dont have to think about which type of M.2 drive to insert into the box. The box allows mounting of SSD cards in three different lengths 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided, and the box does not limit the capacity of the inserted SSD drive. Screwless box opening makes installation and removal of the M.2 SSD drive easier. Drive replacement is quick and simple, expanding the possible uses of the box, e.g., for data migration, testing, etc. The external metal casing is finished in gray with an elegant surface that prevents unwanted fingerprints. The aluminum body of the box and the thermal pad ensure ideal cooling of the inserted M.2 SSD drive. This extends its lifespan and also prevents speed throttling, known as Thermal Throttling. By inserting an M.2 SSD drive into this box, you can easily create a fast, compact, and universal external drive that can be used not only with computers and notebooks but also with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), USB-C female connector. Compatible with USB 5Gbps, USB 20Gbps, USB4, and Thunderbolt 3/4/5. Supported Devices: NVMe M.2 SSDs, SATA M.2 SSDs, designed for M key and B+M key card formats, NGFF 75-pin M key slot for M.2 drives. LED display shows: Recognizing - disk recognition (displayed when the box is connected to a device) Partition - displays the file system, size, and system name of the disk Idle - inactivity (information about the disk - used interface and disk size, speed of the connected bus, partitioning standard of the disk) Disk info - displays information about the disk (manufacturer label of the disk, actual disk temperature, health, amount of written / read data, total running time of the disk, number of disk removals without using safe removal) Monitor real-time disk temperature using a graph Rd/Wr - data transfer (during data transfer, it is possible to switch between sections) Sleep - disk sleep mode Other Features: Supports transfer speeds of 10.000 / 5.000 / 480 Mbit/s. Supports M key or B+M key NVMe (PCIe-Express) and SATA (AHCI) M.2 SSDs with no capacity limit. Supports M.2 drives sizes 2242, 2260, 2280 mm. Supports single- and double-sided M.2 SSDs. Complies with PCIe Base Specification Revision 3.1a specification. Complies with NVM Express 1.3 specification. Complies with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Complies with USB Mass Storage Class specification. The total box bandwidth / transmission rate is determined by the USB interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster transfers in Windows 8 and above. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support. Power supply via USB bus up to 900 mA is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB and data transmission (permanent light). Durable aluminum body and thermal pad improve M.2 SSD cooling. Higher surface temperature is not a defect thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable 25 cm long and USB type C female / USB type A male adapter are included.

Universal external AXAGON EEM2-SG2 RAW box with USB 3.2 Gen 2 interface is designed for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. The package includes not only a USB-C -> USB-A cable for connecting the box to a computer, but also a USB-A -> USB-C adapter. You can connect the box to any free USB port on the notebook. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern functions, e.g. UASP, TRIM and allows reading S.M.A.R.T. information that monitors the status of the disk. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of three different lengths of SSD cards - 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Screwless box opening facilitates assembly and disassembly of the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in titanium silver colour with an elegant brushed finish that prevents unwanted fingerprints. The rounded box design promises pleasant use. The aluminum box body, cooling holes and thermal conductive pad provides very good cooling of the inserted M.2 SSD disk. This extends its service life and also prevents the disk from slowing down, so-called "Thermal Throttling". By inserting the M.2 SSD in the box, you will easily create fast compact external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps. Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key and B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports transmission rates 10 000 / 5 000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - Drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body, cooling holes and thermal conductive pad helps to cool the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB Type C male / USB Type A male cable 20 cm long and USB type A female / USB type C male adapter are included. Other data: External box dimensions 94 x 41 x 10 mm. External box weight 35 g (without USB cable and M.2 SSD disk). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher, Android (OS and device support required). Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 3.2 Gen 2 combined external box for SATA M.2 SSD, USB type C - type A cable 20 cm long, USB-A - USB-C adapter, 1 thermal conductive pad, mounting material, multilanguage quick guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.