Das ADATA AX5U6000C4816G-SLABRWH ist ein Kit aus 1x 16 GB DDR5-6000 (PC5-48000) Speichermodulen aus der XPG Lancer Blade RGB Serie. Die Gesamtkapazität beträgt 16 GB. Das 288-Pin Modul unterstützt eine Latenz von 48-48-48 bei 6000 MHz und benötigt 1,4 Volt Spannung. Intels XMP Version 3.0 und AMD EXPO wird unterstützt.
LANCER BLADE RGB DDR5 MemoryThe LANCER BLADE RGB features a low-profile heatsink design, eliminating the need for a high-profile heatsink, making it suitable for small form factors. The heatsink features simple, geometric lines that perfectly complement a variety of case designs. The LANCER BLADE RGB has undergone rigorous component selection and inspection procedures, and has undergone reliability and compatibility testing. It is durable and built to last, offering the highest quality! Users can use RGB software from major motherboard manufacturers or XPG PRIME lighting effects software to freely control RGB effects and combine all supported products to customize their performance. Compact, low-profile heatsink design Customizable RGB lighting effects Create a personalized light show with XPG Prime PMIC chip for power stability ECC error correction built into the chip High-quality materials for stable overclocking Supports Intel XMP 3.0 and AMD EXPO for easy overclocking
Tootekood: AX5U6000C2832G-DTLABRBKGTIN: 4711658154217Arvutid ja komponendid > Operatiivmälud (RAM)
The ADATA AX5U6000C2832G-DTLABRBK is a kit of 2x 32 GB DIMM DDR5-6000 (PC5-48000) memory modules from the XPG Lancer Blade RGB series. The total capacity is 64 GB (2x 32 GB). The 288-pin module supports a latency of 28, at a maximum frequency of 6000 MHz and requires 1.1 volts of voltage. is supported. Type DDR5 Color black EAN 4711658154217 Manufacturer no. AX5U6000C2832G-DTLABRBK XPG Lancer Blade RGB series Capacity 64 GB (2 x 32 GB) Number 2 pieces DIMM design Lighting color RGB Profiles INTEL XMP (version 3.0), AMD EXPO 288-pin connector Voltage 1.1 volts (from 1.1 to 1.4 volts) Standard DDR5-6000 (PC5-48000) Physical clock 3000 MHz Timings CAS Latency (CL) 28
The ADATA AX5U6000C2832G-DTLABRBK is a kit of 2x 32 GB DIMM DDR5-6000 (PC5-48000) memory modules from the XPG Lancer Blade RGB series. The total capacity is 64 GB (2x 32 GB). The 288-pin module supports a latency of 28, at a maximum frequency of 6000 MHz, and requires 1.1 volts.
LancerBlade DDR5 RGB Compact low-profile radiator LANCER BLADE RGB features a low-profile heatsink that fits perfectly into smaller computer cases and does not interfere with the operation of the tower CPU cooling system. Elegant geometric lines will add versatility and visual appeal to any housing. Personalized RGB lighting Set the RGB lighting according to your preferences. Choose different effects (steady light, breathing light and comet effect) or sync the backlight to your favorite songs using the music mode. All this can be done using RGB lighting control software from all leading motherboard manufacturers. Personalized light show with XPG Prime XPG Prime lighting control software allows you to not only set unique DRAM lighting effects, but also sync all RGB-lit XPG products supported by Prime to create an original light show and personalize your Prime ecosystem. *After selecting Prime as the backlight control software, please close other backlight control software from ASUS/ASRock/Gigabyte/MSI. Conflicts may occur when using Prime with your motherboard's RGB software. Detailed information can be found in the FAQ section. **To use Prime after installing the MSI backlight control program, you must uninstall the MSI program, turn the power off, turn it on again, and then install and run Prime. Improved power management The XPG LANCER BLADE RGB DDR5 memory module has a built-in Power Management IC (PMIC) that increases power stability. Thanks to its lower operating voltage, the LANCER module is also more energy efficient than DDR4 memory. Stability and reliability With built-in error correction code (ECC) technology, this module provides real-time error correction that increases stability and reliability. Made of high-quality materials High-quality integrated circuits and printed circuit boards ensure uncompromising performance and stable overclocking, making this product a perfect solution for demanding gamers and overclockers. AMD EXPO Reliability and stability thanks to AMD EXPO (Extended Profiles for Overclocking) support and compatibility with the latest platforms. Easier overclocking Support for Intel XMP 3.0 profiles ensures easy overclocking without the need to configure complex BIOS settings. There is no need to repeatedly adjust and fine-tune overclocking parameters.
LancerBlade DDR5 RGB Compact low-profile heatsink The LANCER BLADE RGB features a low-profile heatsink that fits perfectly into smaller computer cases and does not interfere with the operation of tower CPU coolers. Elegant geometric lines add versatility and visual appeal to any case. Personalized RGB lighting Customize the RGB lighting to your preferences. Choose from different effects (steady light, breathing light, and comet effect) or sync the backlight to your favorite songs using music mode. All of this can be controlled using RGB lighting software from all major motherboard manufacturers. Personalized light show with XPG Prime XPG Prime lighting control software allows you to set unique DRAM lighting effects and sync all RGB-lit XPG products supported by Prime to create an original light show and personalize your Prime ecosystem. *After selecting Prime as the backlight control software, please close other backlight control software from ASUS/ASRock/Gigabyte/MSI. Conflicts may occur when using Prime with your motherboard’s RGB software. Detailed information can be found in the FAQ section. **To use Prime after installing the MSI backlight control program, you must uninstall the MSI program, turn the power off, turn it on again, and then install and run Prime. Improved power management The XPG LANCER BLADE RGB DDR5 memory module features a built-in Power Management IC (PMIC) that enhances power stability. Thanks to its lower operating voltage, the LANCER module is also more energy efficient than DDR4 memory. Stability and reliability With built-in error correction code (ECC) technology, this module provides real-time error correction to increase stability and reliability. Made of high-quality materials High-quality integrated circuits and printed circuit boards ensure uncompromising performance and stable overclocking, making this product an excellent solution for demanding gamers and overclockers. AMD EXPO Reliability and stability thanks to AMD EXPO (Extended Profiles for Overclocking) support and compatibility with the latest platforms. Easier overclocking Support for Intel XMP 3.0 profiles ensures easy overclocking without the need to configure complex BIOS settings. There’s no need to continuously readjust and fine-tune overclocking parameters.
Lancer Blade DDR5 RGB Compact low-profile heatsink LANCER BLADE RGB features a low-profile heatsink that fits perfectly into smaller computer cases and does not interfere with the operation of tower CPU cooling systems. Elegant geometric lines add versatility and visual appeal to any case. Personalized RGB lighting Adjust the RGB lighting to your preferences. Choose different effects (static, breathing, and comet) or sync the lighting to your favorite songs using music mode. All this can be done using RGB lighting control software from all leading motherboard manufacturers. Personalized light show with XPG Prime XPG Prime lighting control software allows you not only to set unique DRAM lighting effects, but also to sync all Prime-supported RGB-lit XPG products to create an original light show and personalize your Prime ecosystem. *After selecting Prime as the lighting control software, please close other lighting control software from ASUS/ASRock/Gigabyte/MSI. Conflicts may occur when using Prime with your motherboard's RGB software. Detailed information can be found in the FAQ section. **To use Prime after installing the MSI lighting control program, you must uninstall the MSI program, turn the power off, turn it on again, and then install and run Prime. Improved power management The XPG LANCER BLADE RGB DDR5 memory module has a built-in Power Management IC (PMIC) that increases power stability. Thanks to its lower operating voltage, the LANCER module is also more energy efficient than DDR4 memory. Stability and reliability With built-in error correction code (ECC) technology, this module provides real-time error correction that increases stability and reliability. Made of high-quality materials High-quality integrated circuits and printed circuit boards ensure uncompromising performance and stable overclocking, making this product a perfect solution for demanding gamers and overclockers. AMD EXPO Reliability and stability thanks to AMD EXPO (Extended Profiles for Overclocking) support and compatibility with the latest platforms. Easier overclocking Support for Intel XMP 3.0 profiles ensures easy overclocking without the need to configure complex BIOS settings. There is no need to repeatedly adjust and fine-tune overclocking parameters.
LANCER BLADE RGB DDR5 Memory The LANCER BLADE RGB adopts a low-profile heatsink design, removing height consideration from heatsink assembly, and making the product suitable for installation in small chassis. The heatsink is decorated in simple geometric lines, which are a versatile look when paired with various chassis types. The LANCER BLADE RGB has undergone strict component selection and screening procedures, and passed reliability and compatibility tests. It is strong and durable, offering the highest quality! Users can use RGB software provided by major motherboard manufacturers or use XPG PRIME lighting effect software to freely control RGB effects and link all supported products for a customized light show. The LANCER BLADE RGB supports AMD EXPO and is compatible with the latest AMD platform. It also supports Intel XMP 3.0 overclocking, providing players with excellent overclocking performance. Compact Low-Profile Heatsink Design Customizable RGB light effects Create Personalized Lightshow with XPG Prime PMIC for power supply stability On-die ECC error correction High-quality materials for stable overclocking Supports Intel XMP 3.0 and AMD EXPO for easy overclocking
