Kõik hinnakirjad

PC/PBT (HT-UV-IMPACT) is a filament for industrial and automotive applications. The material has been modified for impact strength and heat resistance, and infused with an anti-UV stabiliser. The addition of polybutylene terephthalate (PBT) to Polycarbonate means less deformation on 3D printed parts than with pure PC.[more]The material is easier to print than PC and most common PC/ABS blends, does not emit unpleasant odours during printing has relatively low shrinkage for this group of materials (up to 1%) and very good adhesion to the table. Its excellent mechanical properties, very good impact strength and resilience, combined with the ability to be used outdoors (UV resistant) and the possibility of operating at relatively high temperatures (90-110C), make it an excellent construction material with a wide range of applications. Both in terms of impact strength and temperature resistance, the material performs better than the popular PET-G and ABS, while it is easier to print than PC and PC-ABS.Recommended printing parametersextrusion temperature 240-260°Cbed temperature: 90-110°Cchamber temperature: 50-80°Cair supply: 0-20% (depends on model geometry)compatible worktables: glass, smooth PEI, textured PEI, The filament can be printed on both direct and Bowden feed printers. We recommend closing the chamber. If there are problems with adhesion, we recommend using adhesion formulations. Due to the high printing temperatures, it will be necessary to fit a full-metal heatbreak (without the Teflon tube inside).PRODUCT PARAMETERSColor: blackDiameter: 1.75 mmWeight: 500 g ( vacuum packed)Density: 1.20 g/cm3Odor: odourlessVicat softening point: 120°C (50N, 50°C/h)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,02

PCTG is an advanced 3D printing filament, belonging to the same polyester family as the popular PET-G. Compared to PET-G, PCTG has higher impact strength, heat resistance (up to 76°C) and transparency. It offers an interesting alternative to PET-G. Like PET-G, PCTG does not require a heated print chamber, making it an excellent choice if you plan to print on open hobby printers.PCTG is characterized by high flexibility, strong adhesion between layers, high viscosity and minimal shrinkage. Its characteristics enable easy and efficient printing, even for those without much 3D printing experience. 3D printing using PCTG is widely used in various sectors. In industry, it is an ideal choice for creating parts, small batch production and usable models, confirming the versatility of this material. The automotive sector also benefits from the advantages of PCTG, using it to print accessories, components in the engine compartment, vehicle component housings, as well as components such as air intakes and fluid inlets (chemical resistance). In the world of sport, PCTG proves its value in the production of various types of accessories, protectors, etc. The properties of this material guarantee not only the high durability of the finished prints, but also their aesthetics and functionality. APPLICATION- spare parts,- small batch production,- utility models,- engine compartment accessories and components,- vehicle component housings,- air intakes,- service fluid inlets,- sports accessories, protectors, etc. HOW TO PRINTRecommended printing temperature 240-270°C.Recommended table temperature: 60-80°C.Heated table required TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0.05 mmOval tolerance +/- 0.02 mmNet weight 1000g Print temperature 240-270 °CBed temperature 60-80 °C PHYSICAL PARAMETERS Density 1,24 g/cm3Odor OdorlessTensile strength (to break) 46 MPaNotched Izod impact strength 92 kJ/m2Vicat softening point 76/64 °C (0,455 MPa/1,82 Mpa) Printable model for refill spool sides you can download here: Recommended printing parameters:

PCTG is an advanced 3D printing filament, belonging to the same polyester family as the popular PET-G. Compared to PET-G, PCTG has higher impact strength, heat resistance (up to 76°C) and transparency. It offers an interesting alternative to PET-G. Like PET-G, PCTG does not require a heated print chamber, making it an excellent choice if you plan to print on open hobby printers.PCTG is characterized by high flexibility, strong adhesion between layers, high viscosity and minimal shrinkage. Its characteristics enable easy and efficient printing, even for those without much 3D printing experience. 3D printing using PCTG is widely used in various sectors. In industry, it is an ideal choice for creating parts, small batch production and usable models, confirming the versatility of this material. The automotive sector also benefits from the advantages of PCTG, using it to print accessories, components in the engine compartment, vehicle component housings, as well as components such as air intakes and fluid inlets (chemical resistance). In the world of sport, PCTG proves its value in the production of various types of accessories, protectors, etc. The properties of this material guarantee not only the high durability of the finished prints, but also their aesthetics and functionality. APPLICATION- spare parts,- small batch production,- utility models,- engine compartment accessories and components,- vehicle component housings,- air intakes,- service fluid inlets,- sports accessories, protectors, etc. HOW TO PRINTRecommended printing temperature 240-270°C.Recommended table temperature: 60-80°C.Heated table required TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0.05 mmOval tolerance +/- 0.02 mmNet weight 1000g Print temperature 240-270 °CBed temperature 60-80 °C PHYSICAL PARAMETERS Density 1,24 g/cm3Odor OdorlessTensile strength (to break) 46 MPaNotched Izod impact strength 92 kJ/m2Vicat softening point 76/64 °C (0,455 MPa/1,82 Mpa) Printable model for refill spool sides you can download here: Recommended printing parameters:

PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print Applications: prototyping, large-format printing, lampshades/enclosures. PET-G Standard filament from ROSA3D is characterised by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odour and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Recommended printing parameters extrusion temperature 220-250°C bed temperature: 60-80°C fan: 0-60% Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: black Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.29 g/cm3 Odor: odourless Heat distortion temperature: 78°C (ISO 306) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,02 Tensile elongation: 6 % Tensile strength (to break): 20 MPa

PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print, has high transparency and is odourless.Applications: prototyping, large-format printing, lampshades/enclosures.PET-G Standard filament from ROSA3D is characterised by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odour and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parametersextrusion temperature 220-250°Cbed temperature: 60-80°Cfan: 0-60%PRODUCT PARAMETERSColor: blackDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.29 g/cm3Odor: odourlessHeat distortion temperature: 78°C (ISO 306)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,02Tensile elongation: 6 %Tensile strength (to break): 20 MPa

PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print, has high transparency and is odourless.Applications: prototyping, large-format printing, lampshades/enclosures.PET-G Standard filament from ROSA3D is characterised by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odour and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parametersextrusion temperature 220-250°Cbed temperature: 60-80°Cfan: 0-60%PRODUCT PARAMETERSColor: blackDiameter: 1.75 mmWeight: 3 kg (vacuum packed)Density: 1.29 g/cm3Odor: odourlessHeat distortion temperature: 78°C (ISO 306)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,02Tensile elongation: 6 %Tensile strength (to break): 20 MPa

PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print, has high transparency and is odourless.Applications: prototyping, large-format printing, lampshades/enclosures.PET-G Standard filament from ROSA3D is characterised by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odour and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parametersextrusion temperature 220-250°Cbed temperature: 60-80°Cfan: 0-60% Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: transparent blueDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.29 g/cm3Odor: odourlessHeat distortion temperature: 78°C (ISO 306)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,02Tensile elongation: 6 %Tensile strength (to break): 20 MPa

PET-G CarbonLook filament (poly(ethylene terephthalate) with addition of glycol and carbon fiber) is an easy to print material, with a satin, glossy surface and barely visible layers.Applications: prototyping, large format prints, lampshades/enclosures.PET-G CarbonLook by ROSA3D was designed for printouts in which the visual effect of the object is more important than its industrial application. It was made from PET-G material with an admixture of carbon fibres. The result is a filament with unique visual properties. Printouts made from this filamet have a satin, glossy surface and barely visible layers.Properties of PET-G CarbonLook are similar to other PET-G filaments available in our offer. This means easy printing, no stringing and very good interlayer adhesion. Printouts have very good detail reproduction and an unique surface. The friction of carbon fibres have been minimised to reduce friction and maximise the service life of brass nozzles.PET-G CarbonLook will work great even with basic 3D printers. It does not require a heated bed or chamber. It is characterised by low shrinkage and lack of odour.Recommended printing parametersextrusion temperature 225-250°Cbed temperature: 60-80°Cfan: 0-60%print speed: 60-80 mm/sFilament does not require a heated bed or chamber. In case of problems with adhesion, we recommend the use of an adhesive agent. It is recommended to enable print cooling. Fan speed should be adjusted according to printer capabilities and geometry of the printed object.PRODUCT PARAMETERSColor: carbon blackDiameter: 1.75 mmWeight: 500 g ( vacuum packed)Density: 1.24 g/cm3Odor: odourlessVicat softening point: 78°CDiameter tolerance: +/- 0,05Oval tolerance: +/- 0,02Tensile elongation: 5,5 %Tensile strength (to break): 45 MPa

PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print, has high transparency and is odourless.Applications: prototyping, large-format printing, lampshades/enclosures.PET-G Standard filament from ROSA3D is characterised by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odour and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parametersextrusion temperature 220-250°Cbed temperature: 60-80°Cfan: 0-60% Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: greyDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.29 g/cm3Odor: odourlessHeat distortion temperature: 78°C (ISO 306)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,02Tensile elongation: 6 %Tensile strength (to break): 20 MPa

PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print, has high transparency and is odourless.Applications: prototyping, large-format printing, lampshades/enclosures.PET-G Standard filament from ROSA3D is characterised by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odour and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parametersextrusion temperature 220-250°Cbed temperature: 60-80°Cfan: 0-60% Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: juicy orangeDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.29 g/cm3Odor: odourlessHeat distortion temperature: 78°C (ISO 306)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,02Tensile elongation: 6 %Tensile strength (to break): 20 MPa

Filament 3D ReFill PET-G Magic Army is a three-color 3D filament inspired by military camouflage colors. Through the coextrusion process, it combines three colors (dark green, sandy beige, and brown) into a single strand, creating unique “magical” visual effects. The best results are achieved with prints featuring complex structures and intricate details. The material features low shrinkage, no odor, excellent layer adhesion, and precise detail reproduction. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 220-250°C bed temperature: 60-80°C fan: 0-60% PRODUCT PARAMETERS Color: brown / green / beige Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Odor: odorless

PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print, has high transparency and is odourless.Applications: prototyping, large-format printing, lampshades/enclosures.PET-G Standard filament from ROSA3D is characterised by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odour and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parametersextrusion temperature 220-250°Cbed temperature: 60-80°Cfan: 0-60% Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: pearl goldDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.29 g/cm3Odor: odourlessHeat distortion temperature: 78°C (ISO 306)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,02Tensile elongation: 6 %Tensile strength (to break): 20 MPa

PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print, has high transparency and is odorless.Applications: prototyping, large-format printing, lampshades/enclosures.PET-G Standard filament from ROSA3D is characterized by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odor and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parametersextrusion temperature 220-250°Cbed temperature: 60-80°Cfan: 0-60%PRODUCT PARAMETERSColor: whiteDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.29 g/cm3Odor: odourlessHeat distortion temperature: 78°C (ISO 306)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,02Tensile elongation: 6 %Tensile strength (to break): 20 MPa

PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print, has high transparency and is odourless.Applications: prototyping, large-format printing, lampshades/enclosures.PET-G Standard filament from ROSA3D is characterised by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odour and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parametersextrusion temperature 220-250°Cbed temperature: 60-80°Cfan: 0-60%PRODUCT PARAMETERSColor: transparent whiteDiameter: 1.75 mmWeight: 3000 g (vacuum packed)Density: 1.29 g/cm3Odor: odourlessHeat distortion temperature: 78°C (ISO 306)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,02Tensile elongation: 6 %Tensile strength (to break): 20 MPa

PET-G+CF (poly(ethylene terephthalate) with addition of glycol and carbon fiber) is a material with increased strength designed for printing structural elements and moving parts of machinesApplication: Industry, working elements.The PET-G+CF filament by Rosa3D was designed for printing structural elements and moving parts of machines, where higher durability and heat resistance are required.PET-G+CF printouts are characterised by negligible moulding shrinkage, they are odourless and feature very strong bonding between layers. The material has a graphite, matte surface and a smooth, almost satin, structure, and is relatively easy to print. Negligible moulding shrinkage allows for printing in an open device.The PET-G+CF filament features a strong chemical resistance and the addition of carbon fibre enhances its mechanical and heat durability as well as its impact strength, which ensures universal application of this material.Recommended printing parametersextrusion temperature 240-270°Cbed temperature: 70-90 °Cfan: 0-60%print speed: 60-80 mm/sFilament does not require a heated bed or chamber. In case of problems with adhesion, we recommend the use of an adhesive agent. It is recommended to enable print cooling. Fan speed should be adjusted according to printer capabilities and geometry of the printed object.PRODUCT PARAMETERSColor: blackDiameter: 1.75 mmWeight: 500 g ( vacuum packed)Density: 1.24 g/cm3Odor: odourlessVicat softening point: 78°CDiameter tolerance: +/- 0,05Oval tolerance: +/- 0,02Tensile elongation: 5,5 %Tensile strength (to break): 45 MPa

Filament PLA 1.75mm 1kg Rosa3D, pastell sinine

PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors. PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: Army green Diameter: 1.75 mm Weight: 1000 g (vacuum packed) refill packing without plastic spool Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa

The PLA Starter filament by Rosa3D was designed for beginner users of 3D printers. The seamless printing with our PLA Starter will let you print more and more complicated and challenging projects. PLA Starter is characterized by low moulding shrinkage and a lack of unpleasant smell. PLA Starter printouts are also characterised by very strong adhesion of layers and high quality reproduction of details. The filament is made of biodegradable biopolimer. It is manufactured from food-grade elements. However, in case of products that come into contact with food, certification lies with the manufacturer of the final product. APPLICATION- decorations (e.g. interior design elements, such as lamp shades or vases)- toys (e.g. figurines)- gadgets (e.g. key rings, pendants)- prototypes HOW TO PRINTRecommended printing temperature 190-225°CRecommended table temperature: 40-60°CRecommended cooling: 70-100% TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0,05Oval tolerance +/- 0,02Net weight 1000gPrint temperature 190-225 °CBed temperature 40-60 °C PHYSICAL PARAMETERSDensity 1.24 g/cm3Odor OdorlessTensile elongation 6 %Tensile strength (to break) 53 MPaTensile modulus 3500 MPaThermal deformation temperature 55 °C Printable model for refill spool sides you can download here:

PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: blackDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa

The PLA Starter filament by Rosa3D was designed for beginner users of 3D printers. The seamless printing with our PLA Starter will let you print more and more complicated and challenging projects. PLA Starter is characterized by low moulding shrinkage and a lack of unpleasant smell. PLA Starter printouts are also characterised by very strong adhesion of layers and high quality reproduction of details. The filament is made of biodegradable biopolimer. It is manufactured from food-grade elements. However, in case of products that come into contact with food, certification lies with the manufacturer of the final product. APPLICATION- decorations (e.g. interior design elements, such as lamp shades or vases)- toys (e.g. figurines)- gadgets (e.g. key rings, pendants)- prototypes HOW TO PRINTRecommended printing temperature 190-225°CRecommended table temperature: 40-60°CRecommended cooling: 70-100% TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0,05Oval tolerance +/- 0,02Net weight 1000gPrint temperature 190-225 °CBed temperature 40-60 °C PHYSICAL PARAMETERSDensity 1.24 g/cm3Odor OdorlessTensile elongation 6 %Tensile strength (to break) 53 MPaTensile modulus 3500 MPaThermal deformation temperature 55 °C Printable model for refill spool sides you can download here:

The PLA Starter filament by Rosa3D was designed for beginner users of 3D printers. The seamless printing with our PLA Starter will let you print more and more complicated and challenging projects. PLA Starter is characterized by low moulding shrinkage and a lack of unpleasant smell. PLA Starter printouts are also characterised by very strong adhesion of layers and high quality reproduction of details. The filament is made of biodegradable biopolimer. It is manufactured from food-grade elements. However, in case of products that come into contact with food, certification lies with the manufacturer of the final product. APPLICATION- decorations (e.g. interior design elements, such as lamp shades or vases)- toys (e.g. figurines)- gadgets (e.g. key rings, pendants)- prototypes HOW TO PRINTRecommended printing temperature 190-225°CRecommended table temperature: 40-60°CRecommended cooling: 70-100% TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0,05Oval tolerance +/- 0,02Net weight 1000gPrint temperature 190-225 °CBed temperature 40-60 °C PHYSICAL PARAMETERSDensity 1.24 g/cm3Odor OdorlessTensile elongation 6 %Tensile strength (to break) 53 MPaTensile modulus 3500 MPaThermal deformation temperature 55 °C Printable model for refill spool sides you can download here:

PLA CarbonLook by ROSA3D was designed for printouts in which the visual effect of the object is more important than its industrial application. It was made from PLA material (polyactide) with an admixture of carbon fibres. The result is a filament with unique visual properties. Printouts made from this filamet have a satin, glossy surface and barely visible layers.Properties of PLA CarbonLook are similar to other PLA filaments available in our offer. This means easy printing, no stringing and very good interlayer adhesion. Printouts have very good detail reproduction and an unique surface. The friction of carbon fibres have been minimized to reduce friction and maximize the service life of brass nozzles.PLA CarbonLook will work great even with basic 3D printers. It does not require a heated bed or chamber. It is characterized by low shrinkage and lack of odor.Recommended printing parameters:extruder temperature: 185-225°Cbed temperature: 40-60 °Cprint cooling: 50-100%print speed: 60-80 mm/sFilament does not require a heated bed or chamber. In case of problems with adhesion, we recommend the use of an adhesive agent. It is recommended to enable print cooling. Fan speed should be adjusted according to printer capabilities and geometry of the printed object.PRODUCT PARAMETERS OF PLA CarbonLookDiameter: 1,75 mmNet weight: 500 gSpool weight: 245 gFilament is vacuum packed with desiccant.PHYSICAL PARAMETERS OF PLA CarbonLookDensity: 1,24 g/cm3Odor: odorless

PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors. PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: chocolate brown Diameter: 1.75 mm Weight: 1000 g (vacuum packed) refill packing without plastic spool Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa

PLA Galaxy is a unique line of 3D printing filaments that combines the best properties of polyactide (PLA) with the addition of shiny glitter particles. These glitter particles not only increase the visual appeal of the prints, but also effectively reduce the visibility of the layers of the finished models. The addition of glitter does not cause abrasion of the 3D printer nozzle. PLA Galaxy filament retains the ease of use typical of PLA materials and does not require specialised equipment. Recommended for both novice 3D printing enthusiasts and professionals. It can be printed on the same settings as PLA Starter. The PLA Galaxy series of 3D printing materials is an excellent choice for anyone looking for an easy-to-print 3D filament to create shiny, eye-catching prints. It can be used to create jewellery, decorative items, ornaments, architectural models, mock-ups, board game pieces, figurines or keyrings. APPLICATION- jewellery,- decorative elements,- ornaments,- architectural models,- elements for board games,- figurines,- key chains, HOW TO PRINTRecommended printing temperature 190-225°CRecommended table temperature: 40-60°CRecommended cooling: 70-100% TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0,05Oval tolerance +/- 0,02Net weight 1000g,Print temperature 190-225 °CBed temperature 40-60 °C PHYSICAL PARAMETERSDensity 1.24 g/cm3Odor OdorlessTensile elongation 6 %Tensile strength (to break) 53 MPaTensile modulus 3495 MPaThermal deformation temperature 55 °C Printable model for refill spool sides you can download here:

ELEGOO Galaxy PLA Filament (Peacock Blue)ELEGOO Filament in the shade of Peacock Blue catches the eye with its intense color with a subtle glitter sheen. The light-reflecting particles give the surface a unique character, making it perfect for decorations, figurines and projects that are meant to stand out. The product is based on PLA (polylactide - a biodegradable plastic of plant origin), and there is 1 kg of material per spool.Printing without surprisesWith a very accurate diameter of 1.75 mm and a dimensional tolerance of ± 0.02 mm, the filament is fed to the extruder evenly and without jams. Finished models come out of the printer smooth, well rendered and free of defects typical of less stable filaments, such as air bubbles and stringing. Brocade additives do not adversely affect printing parameters.Practical and ready to useEach spool is machine-rolled, hand-checked and vacuum-packed with a moisture absorber to ensure that it is fresh and ready to use as soon as it is opened. Galaxy PLA works with most FDM (fused 3D printing) printers that support 1.75mm diameter filament. It is a good choice for both beginners and more experienced users. GeneralManufacturerELEGOOModel50.203.0261ColorPeacock BlueWeight1 kg Recommended print settingsDrying settings before printing55 ± 5°CAmbient temperature and humidity≤ 50°C, ≤ 20% relative humidity (store with moisture absorber)Nozzle temperature190 - 230°CTable temperature (depending on printer and surface)35 - 65°CType of working surfaceTextured PEI (polyetherimide - a durable, adherent material used as a base for 3D printing) or other compatible surfacePrinting speedLess than 280 mm/s Physical propertiesDensity1.21 g/cm³Melting point162°CDeflection temperature under load56°CSoftening temperature (Vicat test)62°C Mechanical propertiesTensile strength (XY-measurement made in the horizontal plane of the print, where the material is strongest)38 ± 3 MPaElongation at break (XY)8,7% ± 1,2%Bending strength (XY)75 ± 2 MPaBending modulus (XY)2719 ± 179 MPaImpact strength (XY)56.3 ± 3.5 kJ/m²

PLA Galaxy is a unique line of 3D printing filaments that combines the best properties of polyactide (PLA) with the addition of shiny glitter particles. These glitter particles not only increase the visual appeal of the prints, but also effectively reduce the visibility of the layers of the finished models. The addition of glitter does not cause abrasion of the 3D printer nozzle. PLA Galaxy filament retains the ease of use typical of PLA materials and does not require specialised equipment. Recommended for both novice 3D printing enthusiasts and professionals. It can be printed on the same settings as PLA Starter. The PLA Galaxy series of 3D printing materials is an excellent choice for anyone looking for an easy-to-print 3D filament to create shiny, eye-catching prints. It can be used to create jewellery, decorative items, ornaments, architectural models, mock-ups, board game pieces, figurines or keyrings. APPLICATION- jewellery,- decorative elements,- ornaments,- architectural models,- elements for board games,- figurines,- key chains, HOW TO PRINTRecommended printing temperature 190-225°CRecommended table temperature: 40-60°CRecommended cooling: 70-100% TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0,05Oval tolerance +/- 0,02Net weight 1000g,Print temperature 190-225 °CBed temperature 40-60 °C PHYSICAL PARAMETERSDensity 1.24 g/cm3Odor OdorlessTensile elongation 6 %Tensile strength (to break) 53 MPaTensile modulus 3495 MPaThermal deformation temperature 55 °C Printable model for refill spool sides you can download here:

PLA Galaxy is a unique line of 3D printing filaments that combines the best properties of polyactide (PLA) with the addition of shiny glitter particles. These glitter particles not only increase the visual appeal of the prints, but also effectively reduce the visibility of the layers of the finished models. The addition of glitter does not cause abrasion of the 3D printer nozzle. PLA Galaxy Rainbow Andromeda filament combines shades of blue and purple. Full color cycle: 150g PLA Galaxy filament retains the ease of use typical of PLA materials and does not require specialised equipment. Recommended for both novice 3D printing enthusiasts and professionals. It can be printed on the same settings as PLA Starter. The PLA Galaxy series of 3D printing materials is an excellent choice for anyone looking for an easy-to-print 3D filament to create shiny, eye-catching prints. It can be used to create jewellery, decorative items, ornaments, architectural models, mock-ups, board game pieces, figurines or keyrings. APPLICATION- jewellery,- decorative elements,- ornaments,- architectural models,- elements for board games,- figurines,- key chains, HOW TO PRINTRecommended printing temperature 190-225°CRecommended table temperature: 40-60°CRecommended cooling: 70-100% TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0,05Oval tolerance +/- 0,02Net weight 1000g,Print temperature 190-225 °CBed temperature 40-60 °C PHYSICAL PARAMETERSDensity 1.24 g/cm3Odor OdorlessTensile elongation 6 %Tensile strength (to break) 53 MPaTensile modulus 3495 MPaThermal deformation temperature 55 °C Printable model for refill spool sides you can download here:

PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors. PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: grey Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa

PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors. PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: gray Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa

PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: greenDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa

PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: karmin redDiameter: 1.75 mmWeight: 1000 g (vacuum packed) refill packing without plastic spoolDensity: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa

PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors. PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: light brown Diameter: 1.75 mm Weight: 1000 g (vacuum packed) refill packing without plastic spool Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa

PLA Magic Army 3D printing filament combines three parallel colours in a single filament (green, brown and sand beige) as a result of the coextrusion process. Inspired by the colours used in military Application: decorations (e.g. interior design elements such as lamp shades or vases) toys (e.g. figurines) gadgets (e.g. key rings, pendants) printing personalized gifts. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 195-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: gold / silver Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa

The set contains 6 spools weighing 350g net. Each one contains a unique color composition from ROSA3D portfolio. By choosing our set you get a guarantee of repeatability of colors! WE DO NOT SEND RANDOM COLOURS.The set ALWAYS includes the following colors:PLA Rainbow Silk Tropical – multicolor filament in juicy shades of orange, yellow, green and purple.PLA Multicolor Silk Moon – a multicolor filament in shades of navy black, graphite and lunar steel.PLA Multicolor Silk Frozen – a multicolor filament in shades of blue and satin white.PLA Multicolor Silk Flower – a multicolor filament in shades of pink and violet.PLA Multicolor Silk Jungle – a multicolor filament in shades of yellow and green.PLA Rainbow silk Fire – multicolor filament in shades of deep red, luminous orange, yellow and golden tones.All color compositions available as separate products in our shop.Application:– decorations– toys– gadgets– Your ideas!Recommended printing parameters:extrusion temperature: 195-225 ° Cbed temperature: 40-60 ° Csupply: 20-100%Filament can be printed on unheated tables. In the event of adhesion problems, we recommend the use of an adhesive agent.PRODUCT PARAMETERS of PLA Rainbow / MulticolorDiameter: 1.75 mmWeight: 2100 g (6x350g) (vacuum packed with a desiccant)PHYSICAL PARAMETERS OF PLA Rainbow / MulticolorDensity: 1.25 g / cm3Odor: odorlessThe pigments used are not approved for contact with food

The PLA Starter filament by Rosa3D was designed for beginner users of 3D printers. The seamless printing with our PLA Starter will let you print more and more complicated and challenging projects. PLA Starter is characterized by low moulding shrinkage and a lack of unpleasant smell. PLA Starter printouts are also characterised by very strong adhesion of layers and high quality reproduction of details. The filament is made of biodegradable biopolimer. It is manufactured from food-grade elements. However, in case of products that come into contact with food, certification lies with the manufacturer of the final product. APPLICATION- decorations (e.g. interior design elements, such as lamp shades or vases)- toys (e.g. figurines)- gadgets (e.g. key rings, pendants)- prototypes HOW TO PRINTRecommended printing temperature 190-225°CRecommended table temperature: 40-60°CRecommended cooling: 70-100% TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0,05Oval tolerance +/- 0,02Net weight 1000gPrint temperature 190-225 °CBed temperature 40-60 °C PHYSICAL PARAMETERSDensity 1.24 g/cm3Odor OdorlessTensile elongation 6 %Tensile strength (to break) 53 MPaTensile modulus 3500 MPaThermal deformation temperature 55 °C Printable model for refill spool sides you can download here:

The PLA Starter filament by Rosa3D was designed for beginner users of 3D printers. The seamless printing with our PLA Starter will let you print more and more complicated and challenging projects. PLA Starter is characterized by low moulding shrinkage and a lack of unpleasant smell. PLA Starter printouts are also characterised by very strong adhesion of layers and high quality reproduction of details. The filament is made of biodegradable biopolimer. It is manufactured from food-grade elements. However, in case of products that come into contact with food, certification lies with the manufacturer of the final product. APPLICATION- decorations (e.g. interior design elements, such as lamp shades or vases)- toys (e.g. figurines)- gadgets (e.g. key rings, pendants)- prototypes HOW TO PRINTRecommended printing temperature 190-225°CRecommended table temperature: 40-60°CRecommended cooling: 70-100% TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0,05Oval tolerance +/- 0,02Net weight 1000gPrint temperature 190-225 °CBed temperature 40-60 °C PHYSICAL PARAMETERSDensity 1.24 g/cm3Odor OdorlessTensile elongation 6 %Tensile strength (to break) 53 MPaTensile modulus 3500 MPaThermal deformation temperature 55 °C Printable model for refill spool sides you can download here:

PLA Pastel filament is characterized by its soft, pastel, spring color and matte surface finish. The exceptional ease of printing combined with very good interlayer adhesion makes this product ideal for beginners to 3D printing.PLA Pastel filament was created for users looking for a filament in soft, pastel colors. The carefully selected range of spring colors and matte texture will add subtlety, calmness and harmony to your 3D prints. The exceptional ease of printing will allow you to enjoy aesthetically pleasing prints, and over time will convince you to print more complex and demanding designs.PLA Pastel is characterized by low shrinkage and lack of unpleasant odor. 3D prints are characterized by excellent layer adhesion and very good detail reproduction. In addition, PLA Pastel has been adapted for high-speed printing.Create unique, delicate prints! Play with colors and take your creativity to the next level!The filament is made from a biodegradable biopolymer. It has been created from ingredients approved for food contact. For products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Applications:modelstoysdecorationsjeweleryour ideas!Recommended printing parameters:extrusion temperature 195-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: peachDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa

PLA Rainbow Pastel filament Refill from Rosa3D. PLA (polylactide) is a durable and easy-to-use filament, ideal for beginners in 3D printing.PLA Rainbow is a unique blend of PLA (polylactide)-based materials. Each spool contains several smoothly changing colors. This makes the print made of filament from the PLA Rainbow product line unique.Application:decorations (e.g. interior design elements such as lamp shades or vases)toys (e.g. figurines)gadgets (e.g. key rings, pendants)printing personalized gifts.PLA Rainbow Pastel is an unique combination of seven smoothly transitioning colors, known from the PLA Pastel range: peach, pink, lavender, blue, mint, green and yellow. A full color cycle is contained in ~80m of filament (~240g). The 1kg ReFill PLA Pastel Rainbow contains over 4 full cycles of colors transitions.ATTENTION! The frequency and sequence of color transitions is fixed for a given production batch. A single spool may start at any point in the process, e.g. one spool may start red and another spool orange. Shade differences are allowed. Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: deep red, luminous orange and golden tonesDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa

PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk Dragon Fruit combines two parallel colors in a single filament (green and fuchsia) as a result of the coextrusion process.Application:decorations (e.g. interior design elements such as lamp shades or vases)toys (e.g. figurines)gadgets (e.g. key rings, pendants)printing personalized gifts.Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: green / fuchsiaDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa

PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk Midnight City combines teo parallel colours in a single filament (blue, fuchsia) as a result of the coextrusion process. Application: decorations (e.g. interior design elements such as lamp shades or vases) toys (e.g. figurines) gadgets (e.g. key rings, pendants) printing personalized gifts. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 195-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: blue/ fuchsia Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa

PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk Mistic Green combines two parallel colors in a single filament (green and black) as a result of the coextrusion process. Application: decorations (e.g. interior design elements such as lamp shades or vases) toys (e.g. figurines) gadgets (e.g. key rings, pendants) printing personalized gifts. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: green / black Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa

PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk Mistic Purple combines two parallel colors in a single filament (graphite and fuchsia) as a result of the coextrusion process.Application:decorations (e.g. interior design elements such as lamp shades or vases)toys (e.g. figurines)gadgets (e.g. key rings, pendants)printing personalized gifts.Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: graphite / fuchsiaDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa

PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk Pink Dynamic combines two parallel colors in a single filament (pink and violet) as a result of theApplication:decorations (e.g. interior design elements such as lamp shades or vases)toys (e.g. figurines)gadgets (e.g. key rings, pendants)printing personalized gifts.Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: pink / violetDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa

PLA Starter filament by Rosa3D was created for beginners of 3D printng. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: whiteDiameter: 1.75 mmWeight: 3 kg (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa

PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: greenDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa