Kõik hinnakirjad

AXAGON CLR-M2FAN copper heatsink with fan for perfect cooling of high performance M.2 SSD disks, especially NVMe. The universal heatsink can be used for M.2 cards with size 22 x 80 mm. Supplied thermally conductive pads allow heatsink installation for all single-sided as well as double-sided M.2 SSD disks. Ribbed copper heatsink core with aluminum body is 8.6 mm high. Inside the body, there is a fan with PWM speed control, which is connected to the computer's motherboard with a 4-pin power connector. The fan speed can be automatically controlled by temperature, to save energy or to reduce noise. Copper heatsink with fan together with metal bracket assists in optimal dissipation of heat generated during the M.2 SSD operation. It also reduces the drive temperature by up to 30°C. This prolongs the M.2 SSD life and prevents disk slow down, so-called "Thermal Throttling". The heatsink can be used not only with M.2 AXAGON adapters, but also with M.2 (NGFF) slots on motherboards, etc. Thanks to the metal frame, the heatsink dissipates heat from both sides of the M.2 disk and thus achieves maximum cooling efficiency. Features: Support of M.2 drives of any capacity. Support of both single-sided and double-sided M.2 drives. Support of M.2 drives, size 22 x 80 mm. Support of SATA (AHCI) as well as NVMe (PCI-Express) M.2 drives. Ribbed copper heatsink core, aluminum body. Fan with PWM speed control, 4-pin power connector. 3 pcs thermally conductive pads can be deliberately combined and used for both single-sided and double-sided SSD disks with different height. Compact dimensions 76 x 24 x 12 mm. Weight 45 g. Package contains: Heatsink with fan and fixed 38 cm long power cable, metal bracket, 3 pcs thermally conductive pads, mounting material and screwdriver, packed in a cardboard box. Review - https://www.hwcooling.net/en/axagon-clr-m2fan-active-ssd-cooler-for-closed-off-spaces-review/

<p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">AXAGON CLR-M2L10 ALU passive heatsink for ideal cooling of high performance M.2 SSDs, especially NVMe.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">The universal passive heatsink can be used for M.2 cards, size 22 x 80 mm. Two supplied thermally conductive pads allow cooler installation for all one-sided as well as double-sided M.2 SSD disks.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">10mm high ribbed aluminum heatsink assists in a better dissipation of heat generated during the M.2 SSD operation. It also reduces the drive temperature by up to 25 °C. This prolongs the M.2 SSD life and prevents disk slow down, so-called "Thermal Throttling".</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">Thanks to its easy installation and compact dimensions, the heatsink can be used not only with M.2 AXAGON adapters, but also with M.2 (NGFF) slots on motherboards, etc. Thanks to the 10 mm height the cooler achieves maximum cooling efficiency.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Features:</strong><br /> • Support of M.2 drives of any capacity.<br /> • Support of both one-sided and double-sided M.2 drives.<br /> • Support of M.2 drives, size 22 x 80 mm.<br /> • Support of SATA (AHCI) as well as NVMe (PCI-Express) M.2 drives.<br /> • Ribbed aluminum heatsink body.<br /> • 2 thermally conductive pads can be deliberately combined and used for both one-sided and double-sided SSDs.<br /> • Compact dimensions 77 x 22 x 10 mm.<br /> • Weight 19 g.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Package contains:</strong><br /> • passive heatsink,<br /> • 2 thermally conductive pads,<br /> • mounting material,<br /> • packed in a cardboard box with clearly indicated parameters.</span></span></p>

AXAGON CLR-M2L10 ALU passive heatsink for ideal cooling of high performance M.2 SSDs, especially NVMe. The universal passive heatsink can be used for M.2 cards, size 22 x 80 mm. Two supplied thermally conductive pads allow cooler installation for all one-sided as well as double-sided M.2 SSD disks. 10mm high ribbed aluminum heatsink assists in a better dissipation of heat generated during the M.2 SSD operation. It also reduces the drive temperature by up to 25°C. This prolongs the M.2 SSD life and prevents disk slow down, so-called "Thermal Throttling". Thanks to its easy installation and compact dimensions, the heatsink can be used not only with M.2 AXAGON adapters, but also with M.2 (NGFF) slots on motherboards, etc. Thanks to the 10 mm height the cooler achieves maximum cooling efficiency. Features: - Support of M.2 drives of any capacity. - Support of both one-sided and double-sided M.2 drives. - Support of M.2 drives, size 22 x 80 mm. - Support of SATA (AHCI) as well as NVMe (PCI-Express) M.2 drives. - Ribbed aluminum heatsink body. - 2 thermally conductive pads can be deliberately combined and used for both one-sided and double-sided SSDs. - Compact dimensions 77 x 22 x 10 mm. - Weight 19 g. Package contains: - passive heatsink, - 2 thermally conductive pads, - mounting material, - packed in a cardboard box with clearly indicated parameters.

AXAGON CLR-M2L3 ALU passive heatsink for ideal cooling of high performance M.2 SSDs, especially NVMe. The universal passive heatsink can be used for M.2 cards, size 22 x 80 mm. Two supplied thermally conductive pads allow cooler installation for all one-sided as well as double-sided M.2 SSD disks. 3mm high ribbed aluminum heatsink assists in a better dissipation of heat generated during the M.2 SSD operation. It also reduces the drive temperature by up to 15°C. This prolongs the M.2 SSD life and prevents disk slow down, so-called "Thermal Throttling". Thanks to its easy installation and compact dimensions, the heatsink can be used not only with M.2 AXAGON adapters, but also with M.2 (NGFF) slots on motherboards, etc. Low profile of heatsink allows usage in limited space. Features: • Support of M.2 drives of any capacity. • Support of both one-sided and double-sided M.2 drives. • Support of M.2 drives, size 22 x 80 mm. • Support of SATA (AHCI) as well as NVMe (PCI-Express) M.2 drives. • Ribbed aluminum heatsink body. • 2 thermally conductive pads can be deliberately combined and used for both one-sided and double-sided SSDs. • Compact dimensions 77 x 22 x 3 mm. • Weight 10 g. Package contains: • passive heatsink, • 2 thermally conductive pads, • mounting material, • packed in a cardboard box with clearly indicated parameters.

<p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">AXAGON CLR-M2L6 ALU passive heatsink for ideal cooling of high performance M.2 SSDs, especially NVMe.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">The universal passive heatsink can be used for M.2 cards, size 22 x 80 mm. Two supplied thermally conductive pads allow cooler installation for all one-sided as well as double-sided M.2 SSD disks.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">6mm high ribbed aluminum heatsink assists in a better dissipation of heat generated during the M.2 SSD operation. It also reduces the drive temperature by up to 20°C. This prolongs the M.2 SSD life and prevents disk slow down, so-called "Thermal Throttling".</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">Thanks to its easy installation and compact dimensions, the heatsink can be used not only with M.2 AXAGON adapters, but also with M.2 (NGFF) slots on motherboards, etc. The heatsink has the ideal profile height / cooling efficiency ratio.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Features:</strong><br /> • Support of M.2 drives of any capacity.<br /> • Support of both one-sided and double-sided M.2 drives.<br /> • Support of M.2 drives, size 22 x 80 mm.<br /> • Support of SATA (AHCI) as well as NVMe (PCI-Express) M.2 drives.<br /> • Ribbed aluminum heatsink body.<br /> • 2 thermally conductive pads can be deliberately combined and used for both one-sided and double-sided SSDs.<br /> • Compact dimensions 77 x 22 x 6 mm.<br /> • Weight 13 g.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Package contains:</strong><br /> • Passive heatsink,<br /> • 2 thermally conductive pads,<br /> • mounting material,<br /> • packed in a cardboard box with clearly indicated parameters.</span></span></p> <p> </p>

M.2-2280 SSD passive cooler, with 20 mm aluminum cooling fins, reduces the temperature by up to 40 °C, various thermal pads with different thicknesses, for single and double-sided M.2 SSD storage.

<p>Fast external <b>AXAGON EEM2-20G ARMORED box</b> with USB 20Gbps interface for M.2 NVMe SSDs. The <b>double-sided USB-C connector</b> on the box enables a reliable connection. In the package you will find a USB-C -> USB-C cable to connect the box to your computer.</p> <p>Thanks to the USB 20Gbps interface, the transmission rate is <b>up to 20 Gb/s</b>. To take full advantage of the speed of the box, the controller of the connected device must be compatible with <b>USB 3.2 Gen 2x2</b>. These controllers are typically used in gaming laptops and modern desktop computers. The external M.2 box also supports other modern features e.g. <b>UASP</b>, <b>TRIM</b> and enables reading <b>S.M.A.R.T.</b> disk status monitoring information. Standby support when idle.</p> <p>The advantage of the box is the attachment of <b>four different lengths</b> of SSD cards - 30, 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD disk. <b>Disk replacement</b> is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc.</p> <p><b>Aluminum box body</b> and thermal conductive pad provides very good M.2 SSD disk cooling. Vents on the sides ensure sufficient <b>air circulation</b>. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. Another benefit is the <b>silicone sleeve</b>, which provides <b>better protection of the box</b> against shocks, prevents sliding on the table and ensures a comfortable grip in the hand. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints.</p> <p>By inserting the M.2 SSD in the box, you will easily create fast <b>compact and universal external disk</b>. The box can be used with computers and notebooks, as well as with mobile phones and tablets. <br/><br/><b>Input:</b><br/> USB 20Gbps (USB 3.2 Gen 2x2), connector USB-C female.<br/> Compatible with USB 5Gbps, USB 10Gbps.</p> <p><b>Device support:</b><br/> NMVe M.2 SSD disks,<br/> designed for M key or B+M key card formats,<br/> NGFF 75-pin M key slot for M.2 drives.</p> <p><b>Maximum theoretical supported speeds and compatibility with USB controllers (ports):</b><br/> Laptop / PC with USB 20Gbps (USB 3.2 Gen 2x2) port: max. speed 20 Gbit/s.<br/> Laptop / PC with USB 10Gbps (USB 3.2 Gen 2) port: max. speed 10 Gbit/s.<br/> Laptop / PC with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0) port: max. speed 5 Gbit/s.<br/> Compatible with USB4, Thunderbolt 3/4 ports: max. speed 10 Gbit/s.<br/> The real box bandwidth / transmission rate is about 2000 MB/s (2 GB/s), it is given by the limits of the USB 3.2 Gen 2x2 interface.</p> <p><b>Other features:</b><br/> Supports transmission rates 20.000 / 10.000 / 5.000 Mbit/s.<br/> Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit.<br/> Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm.<br/> Support of both one-sided and double-sided M.2 SSDs.<br/> Compliant with PCI Express Base Specification Revision 3.1a specification.<br/> Compliant with NVM Express 1.3c Specification.<br/> Compliant with USB Mass Storage Class specification.<br/> Supports BOT (Bulk-Only Transport).<br/> Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later.<br/> Supports TRIM functionality to limit gradual degradation of the SSD performance over time.<br/> Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition.<br/> SSD boot support in external box.<br/> Possibility to connect your device while running thanks to the Hot Plug support.<br/> Full Plug and Play support.<br/> Power supply via USB bus up to 900mA from one USB port is sufficient in all cases.<br/> A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking).<br/> Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk.<br/> Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment.<br/> Connection via USB 3.2 Gen 2x2 type C female connector.<br/> USB type C male / USB type C male cable length 38 cm in the package.</p> <p><b>Other data:</b><br/> Box dimensions 15 x 112 x 40 mm (H x W x D).<br/> Box weight 83 g (without cable, without disk, without sleeve).</p> <p><b>Supported operating systems:</b><br/> Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android.<br/> Compatibility depends on the operating system and device manufacturer support.<br/> Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer.</p> <p><b>Package contains:</b><br/> USB-C 20Gbps external box for M.2 SSD,<br/> silicone sleeve,<br/> USB-C USB-C cable 38 cm long,<br/> 1 thermal conductive pad,<br/> mounting kit and screwdriver,<br/> multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA,<br/> packed in a cardboard box with a hanging hole.</p>

Fast external AXAGON EEM2-20G ARMORED box with USB 20Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find a USB-C -> USB-C cable to connect the box to your computer. Thanks to the USB 20Gbps interface, the transmission rate is up to 20 Gb/s. To take full advantage of the speed of the box, the controller of the connected device must be compatible with USB 3.2 Gen 2x2. These controllers are typically used in gaming laptops and modern desktop computers. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage of the box is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. Vents on the sides ensure sufficient air circulation. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. Another benefit is the silicone sleeve, which provides better protection of the box against shocks, prevents sliding on the table and ensures a comfortable grip in the hand. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 20Gbps (USB 3.2 Gen 2x2), connector USB-C female. Compatible with USB 5Gbps, USB 10Gbps. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Maximum theoretical supported speeds and compatibility with USB controllers (ports): Laptop / PC with USB 20Gbps (USB 3.2 Gen 2x2) port: max. speed 20 Gbit/s. Laptop / PC with USB 10Gbps (USB 3.2 Gen 2) port: max. speed 10 Gbit/s. Laptop / PC with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0) port: max. speed 5 Gbit/s. Compatible with USB4, Thunderbolt 3/4 ports: max. speed 10 Gbit/s. The real box bandwidth / transmission rate is about 2000 MB/s (2 GB/s), it is given by the limits of the USB 3.2 Gen 2x2 interface. Other features: Supports transmission rates 20.000 / 10.000 / 5.000 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2x2 type C female connector. USB type C male / USB type C male cable length 38 cm in the package. Other data: Box dimensions 15 x 112 x 40 mm (H x W x D). Box weight 83 g (without cable, without disk, without sleeve). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 20Gbps external box for M.2 SSD, silicone sleeve, USB-C USB-C cable 38 cm long, 1 thermal conductive pad, mounting kit and screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Gaming external AXAGON EEM2-GAM M.2 box with USB 10Gbps interface for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find two cables to connect the box to your computer. One USB-C USB-C and the other USB-C USB-A. You can connect the box to any free USB port on the notebook. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. A great advantage is the screwless opening of the box. Just press the button on the side to release the bottom cover. Changing discs is so easy and fast. The stylish frame for M.2 drives will impress you with its premium gaming design in black with an elegant surface that will perfectly highlight your gaming setup. The RGB LED indication adds a stylish look and blends perfectly with any gaming laptop, further enhancing the atmosphere of your gaming environment. Also included is a functional sleeve that protects the box opening button, increases overall protection, and offers a loop for hanging. Aluminum box body and thermal conductive pad provides ideal cooling for the inserted M.2 SSD. This extends the life of the disk and prevents slowing down of the disk speed, so called. Thermal Throttling. Inserting an M.2 SSD into this box easily creates a fast, compact and versatile external drive that can be used not only with PCs and laptops, but also with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with 480Mbps, USB 5Gbps, USB4 a Thunderbolt 3/4. Device support: NVMe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. RGB LED indication. Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Two USB type C or A male / USB type C male cable length 50 cm included in the package. Other data: Box dimensions 13 x 130 x 55 mm (H x W x D). Box weight 105 g (without cable and M.2 disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility is dependent on an updated operating system and support from the device manufacturer. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, protective sleeve, USB-C - USB-C cable 50 cm long, USB-A - USB-C cable 50 cm long, 2 thermal conductive pads, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA packed in a cardboard box with a hanging hole.

Superfast external AXAGON EEM2-GTR THIN RIB box with USB 3.2 Gen 2 interface is designed for NVMe (PCI-Express) M.2 SSD disks. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-C cable enables a reliable connection to a computer. Ribbed body design and thermal conductive pads provides great M.2 SSD disk cooling. This extends its service life and also prevents the disk from slowing down, so-called "Thermal Throttling". Robust box body also protect the disk. SuperSpeed USB 10 Gbit/s interface allows you to enjoy the speed of modern M.2 SSD drives. Due the fast USB 3.2 Gen 2 interface the transmission speed is up to 10Gb/s. NVMe M.2 SSD disk up to 22x80 mm can be used in the external box. The box has no SSD disk capacity limitation. M.2 cards can be single-sided or double-sided. Inserting M.2 SSD disk into this box you will create a fast and compact external drive. The box can be used with computers and laptops, as well as with mobile phones and tablets. Input: USB 3.2 Gen 2 / SuperSpeed+ USB speed up to 10 Gbit/s. Connection via reversible USB type C female connector. Device support: NVMe (PCI-Express) M.2 SSD disks, designed for M-key or B+M-key card formats, NGFF 75-pin M-key slot for NVMe M.2 disks. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.1 Gen1 / USB 3.0 and USB 2.0. Supports transmission rates 10.000 / 5000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Supports M-key or B+M-key NVMe (PCI-Express) M.2 SSD disks without maximum capacity limitation. Supports M.2 drives with a size of 2230, 2242, 2260, 2280 mm. Supports one-sided and double-sided M.2 SSD disks. Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 Specification. Compliant with USB Mass Storage Class Specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is around 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support after 5 minutes of inactivity. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. A blue LED indicating the connection to the USB port (permanent light) and data transmission (blinking). Aluminum ribbed body and thermal conductive pads helps M.2 SSD disk cooling. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Box connected via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 20 cm in the package. Other data: External box dimensions 106 x 43 x 14 mm. External box weight 68 g (without USB cable and M.2 SSD disk). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher, Android (OS and device support required). Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 3.2 Gen 2 external box for NVMe M.2 SSD, USB-C USB-C cable 20 cm long, 2 thermal conductive pads, mounting kit and screwdriver, multilanguage quick guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.

<p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">Superfast external AXAGON EEM2-GTR THIN RIB box with USB 3.2 Gen 2 interface is designed for NVMe (PCI-Express) M.2 SSD disks. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-C cable enables a reliable connection to a computer. </span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">Ribbed body design and thermal conductive pads provides great M.2 SSD disk cooling. This extends its service life and also prevents the disk from slowing down, so-called "Thermal Throttling". Robust box body also protect the disk.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">SuperSpeed USB 10 Gbit/s interface allows you to enjoy the speed of modern M.2 SSD drives. Due the fast USB 3.2 Gen 2 interface the transmission speed is up to 10Gb/s. </span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">NVMe M.2 SSD disk up to 22x80 mm can be used in the external box. The box has no SSD disk capacity limitation. M.2 cards can be single-sided or double-sided. Inserting M.2 SSD disk into this box you will create a fast and compact external drive. The box can be used with computers and laptops, as well as with mobile phones and tablets. </span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Input:</strong><br /> • USB 3.2 Gen 2 / SuperSpeed+ USB speed up to 10 Gbit/s.<br /> • Connection via reversible USB type C female connector.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Device support:</strong><br /> • NVMe (PCI-Express) M.2 SSD disks,<br /> • designed for M-key or B+M-key card formats,<br /> • NGFF 75-pin M-key slot for NVMe M.2 disks.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Other features:</strong><br /> • Compatible with USB 3.2 Gen 2, backward compatible with USB 3.1 Gen1 / USB 3.0 and USB 2.0.<br /> • Supports transmission rates 10.000 / 5000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed).<br /> • Supports M-key or B+M-key NVMe (PCI-Express) M.2 SSD disks without maximum capacity limitation.<br /> • Supports M.2 drives with a size of 2230, 2242, 2260, 2280 mm.<br /> • Supports one-sided and double-sided M.2 SSD disks.<br /> • Compliant with PCI Express Base Specification Revision 3.1a.<br /> • Compliant with NVM Express 1.3 Specification.<br /> • Compliant with USB Mass Storage Class Specification.<br /> • The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s).<br /> • The real box bandwidth / transmission rate is around 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface.<br /> • Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later.<br /> • Supports TRIM functionality to limit gradual degradation of the SSD performance over time.<br /> • SSD boot support in external box.<br /> • Possibility to connect your device while running thanks to the Hot Plug support.<br /> • Full Plug and Play support.<br /> • Sleep mode support – after 5 minutes of inactivity.<br /> • Power supply via USB bus up to 900mA from one USB port is sufficient in all cases.<br /> • A blue LED indicating the connection to the USB port (permanent light) and data transmission (blinking).<br /> • Aluminum ribbed body and thermal conductive pads helps M.2 SSD disk cooling.<br /> • Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment.<br /> • Box connected via USB 3.2 Gen 2 type C female connector.<br /> • USB type C male / USB type C male cable length 20 cm in the package.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Other data:</strong><br /> • External box dimensions 106 x 43 x 14 mm.<br /> • External box weight 68 g (without USB cable and M.2 SSD disk).</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Supported operating systems:</strong><br /> • MS Windows 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher, Android (OS and device support required).<br /> • Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer.</span></span></p>

Universal external AXAGON EEM2-GTS2 THIN SCREWLESS box with USB 10Gbps interface for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. The package includes not only a USB-C -> USB-C cable for connecting the box to a computer, but also a USB-C -> USB-A adapter. You can connect the box to any free USB port on the notebook. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Screwless box opening facilitates assembly and disassembly of the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in grey color with an elegant finish, that prevents unwanted fingerprints. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 3.2 Gen 1, USB4 a Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Supports M.2 drives with a size of 2230, 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminum body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable 50 cm long and USB type C female / USB type A male adapter are included. Other data: Box dimensions 112 x 40 x 14 mm. Box weight 48 g (without cable and M.2 SSD disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility is dependent on an updated operating system and support from the device manufacturer. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, USB-C - USB-C cable, 50 cm long with USB-C - USB-A adapter, 1 thermal conductive pad, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The external AXAGON EEM2-SD2 DISPLAY box with a USB 10Gbps interface is designed for M.2 NVMe or SATA SSD drives. Reliable connection to a computer is ensured by a reversible USB-C connector on the box. The package includes not only a USB-C -> USB-C cable for connecting the box to a computer, but also a USB-C -> USB-A adapter. This way, you can connect the box to any available USB port on your notebook. The box is equipped with an advanced LED display that provides an instant overview of your drive's status. It offers several display modes, including detection of the connected drive, the file system used, temperature, drive health, data transfer speed, and operating hours. A detailed graph allows real-time monitoring of the drives temperature, while the sleep mode saves power when idle. With this intelligent monitoring, you will always have your drive under control simply, clearly, and efficiently. Thanks to the USB 3.2 Gen 2 interface, the transfer speed is up to 10 Gb/s. The external M.2 box also supports other modern features such as UASP, TRIM, and allows reading of S.M.A.R.T. information monitoring the condition of the drive. A unique feature, thanks to the used chipset, is the possibility to use both M.2 NVMe and SATA drives. You dont have to think about which type of M.2 drive to insert into the box. The box allows mounting of SSD cards in three different lengths 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided, and the box does not limit the capacity of the inserted SSD drive. Screwless box opening makes installation and removal of the M.2 SSD drive easier. Drive replacement is quick and simple, expanding the possible uses of the box, e.g., for data migration, testing, etc. The external metal casing is finished in gray with an elegant surface that prevents unwanted fingerprints. The aluminum body of the box and the thermal pad ensure ideal cooling of the inserted M.2 SSD drive. This extends its lifespan and also prevents speed throttling, known as Thermal Throttling. By inserting an M.2 SSD drive into this box, you can easily create a fast, compact, and universal external drive that can be used not only with computers and notebooks but also with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), USB-C female connector. Compatible with USB 5Gbps, USB 20Gbps, USB4, and Thunderbolt 3/4/5. Supported Devices: NVMe M.2 SSDs, SATA M.2 SSDs, designed for M key and B+M key card formats, NGFF 75-pin M key slot for M.2 drives. LED display shows: Recognizing - disk recognition (displayed when the box is connected to a device) Partition - displays the file system, size, and system name of the disk Idle - inactivity (information about the disk - used interface and disk size, speed of the connected bus, partitioning standard of the disk) Disk info - displays information about the disk (manufacturer label of the disk, actual disk temperature, health, amount of written / read data, total running time of the disk, number of disk removals without using safe removal) Monitor real-time disk temperature using a graph Rd/Wr - data transfer (during data transfer, it is possible to switch between sections) Sleep - disk sleep mode Other Features: Supports transfer speeds of 10.000 / 5.000 / 480 Mbit/s. Supports M key or B+M key NVMe (PCIe-Express) and SATA (AHCI) M.2 SSDs with no capacity limit. Supports M.2 drives sizes 2242, 2260, 2280 mm. Supports single- and double-sided M.2 SSDs. Complies with PCIe Base Specification Revision 3.1a specification. Complies with NVM Express 1.3 specification. Complies with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Complies with USB Mass Storage Class specification. The total box bandwidth / transmission rate is determined by the USB interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster transfers in Windows 8 and above. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support. Power supply via USB bus up to 900 mA is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB and data transmission (permanent light). Durable aluminum body and thermal pad improve M.2 SSD cooling. Higher surface temperature is not a defect thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable 25 cm long and USB type C female / USB type A male adapter are included.

<p>The external<b> AXAGON EEM2-SD2 DISPLAY box</b> with a USB 10Gbps interface is designed for <b>M.2 NVMe</b> or<b> SATA SSD</b> <b>drives</b>. Reliable connection to a computer is ensured by a<b> reversible USB-C connect</b>or on the box. The package includes not only a USB-C -> USB-C cable for connecting the box to a computer, but also a USB-C -> USB-A adapter. This way, you can connect the box to any available USB port on your notebook.</p> <p>The box is equipped with an <b>advanced LED display </b>that provides an instant<b> overview of your drive's status</b>. It offers several display modes, including detection of the connected drive, the file system used, temperature, drive health, data transfer speed, and operating hours. A detailed graph allows <b>real-time monitoring of the drives temperature</b>, while the sleep mode saves power when idle. With this intelligent monitoring, you will always have your drive under control simply, clearly, and efficiently.</p> <p>Thanks to the USB 3.2 Gen 2 interface, the transfer <b>speed is up to 10 Gb/s</b>. The external M.2 box also supports other modern features such as<b> UASP, TRIM</b>, and allows reading of <b>S.M.A.R.T.</b> information monitoring the condition of the drive.<b> A unique feature</b>, thanks to the used chipset, is the possibility to use both M.2 NVMe and SATA drives. You dont have to think about which type of M.2 drive to insert into the box. The box allows mounting of SSD cards in<b> three different lengths</b>  42, 60 and 80 mm. M.2 cards can be single-sided or double-sided, and the box does not limit the capacity of the inserted SSD drive.</p> <p><b>Screwless box opening</b> makes installation and removal of the M.2 SSD drive easier.<b> Drive replacement</b> is quick and simple, expanding the possible uses of the box, e.g., for data migration, testing, etc. The external metal casing is finished in gray with an elegant surface that prevents unwanted fingerprints. <b>The aluminum body</b> of the box and the thermal pad ensure ideal cooling of the inserted M.2 SSD drive. This extends its lifespan and also prevents speed throttling, known as Thermal Throttling.</p> <p>By inserting an M.2 SSD drive into this box, you can easily create a fast, <b>compact, and universal external drive </b>that can be used not only with computers and notebooks but also with mobile phones and tablets.</p> <p><b>Input:</b></p> <ul><li> USB 10Gbps (USB 3.2 Gen 2), USB-C female connector.</li> <li> Compatible with USB 5Gbps, USB 20Gbps, USB4, and Thunderbolt 3/4/5.</li> </ul><p><b>Supported Devices:</b></p> <ul><li> NVMe M.2 SSDs,</li> <li> SATA M.2 SSDs,</li> <li> designed for M key and B+M key card formats,</li> <li> NGFF 75-pin M key slot for M.2 drives.</li> </ul><p><b>LED display shows:</b></p> <ul><li> Recognizing - disk recognition (displayed when the box is connected to a device)</li> <li> Partition - displays the file system, size, and system name of the disk</li> <li> Idle - inactivity (information about the disk - used interface and disk size, speed of the connected bus, partitioning standard of the disk)</li> <li> Disk info - displays information about the disk (manufacturer label of the disk, actual disk temperature, health, amount of written / read data, total running time of the disk, number of disk removals without using safe removal)</li> <li> Monitor real-time disk temperature using a graph</li> <li> Rd/Wr - data transfer (during data transfer, it is possible to switch between sections)</li> <li> Sleep - disk sleep mode</li> </ul><p><b>Other Features:</b></p> <ul><li> Supports transfer speeds of 10.000 / 5.000 / 480 Mbit/s.</li> <li> Supports M key or B+M key NVMe (PCIe-Express) and SATA (AHCI) M.2 SSDs with no capacity limit.</li> <li> Supports M.2 drives sizes 2242, 2260, 2280 mm.</li> <li> Supports single- and double-sided M.2 SSDs.</li> <li> Complies with PCIe Base Specification Revision 3.1a specification. </li> <li> Complies with NVM Express 1.3 specification.</li> <li> Complies with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s).</li> <li> Complies with USB Mass Storage Class specification.</li> <li> The total box bandwidth / transmission rate is determined by the USB interface used (theoretically up to 10 Gbit/s).</li> <li> The real box bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface.</li> <li> Supports BOT (Bulk-Only Transport).</li> <li> Supports UASP (USB Attached SCSI) for faster transfers in Windows 8 and above.</li> <li>  Supports TRIM functionality to limit gradual degradation of the SSD performance over time.</li> <li> Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition.</li> <li> SSD boot support in external box.</li> <li> Possibility to connect your device while running thanks to the Hot Plug support.</li> <li> Full Plug and Play support.</li> <li> Standby support.</li> <li> Power supply via USB bus up to 900 mA is sufficient in all cases.</li> <li> A decent blue LED indicating the connection to the computer's USB and data transmission (permanent light).</li> <li> Durable aluminum body and thermal pad improve M.2 SSD cooling.</li> <li> Higher surface temperature is not a defect thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment.</li> <li> Connection via USB 3.2 Gen 2 type C female connector.</li> <li> USB type C male / USB type C male cable 25 cm long and USB type C female / USB type A male adapter are included.</li> </ul>

Universal external AXAGON EEM2-SG2 RAW box with USB 3.2 Gen 2 interface is designed for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. The package includes not only a USB-C -> USB-A cable for connecting the box to a computer, but also a USB-A -> USB-C adapter. You can connect the box to any free USB port on the notebook. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern functions, e.g. UASP, TRIM and allows reading S.M.A.R.T. information that monitors the status of the disk. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of three different lengths of SSD cards - 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Screwless box opening facilitates assembly and disassembly of the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in titanium silver colour with an elegant brushed finish that prevents unwanted fingerprints. The rounded box design promises pleasant use. The aluminum box body, cooling holes and thermal conductive pad provides very good cooling of the inserted M.2 SSD disk. This extends its service life and also prevents the disk from slowing down, so-called "Thermal Throttling". By inserting the M.2 SSD in the box, you will easily create fast compact external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps. Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key and B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports transmission rates 10 000 / 5 000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - Drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body, cooling holes and thermal conductive pad helps to cool the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB Type C male / USB Type A male cable 20 cm long and USB type A female / USB type C male adapter are included. Other data: External box dimensions 94 x 41 x 10 mm. External box weight 35 g (without USB cable and M.2 SSD disk). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher, Android (OS and device support required). Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 3.2 Gen 2 combined external box for SATA M.2 SSD, USB type C - type A cable 20 cm long, USB-A - USB-C adapter, 1 thermal conductive pad, mounting material, multilanguage quick guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Fast external AXAGON EEM2-UB2 ARROW box with USB 10Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find an USB-C -> USB-C cable to connect the box to your computer. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage is the attachment of three different lengths of SSD cards - 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 3.2 Gen 1, USB4 and Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 20 cm in the package. Other data: Box dimensions 115 x 39 x 11 mm. Box weight 43 g (without cable and M.2 SSD disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, USB-C - USB-C cable 20 cm long, 3 thermal conductive pads, mounting material and a screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Super fast external box AXAGON EEM2-UG2 with USB 3.2 Gen 2 interface is designed for NVMe (PCI-Express) M.2 SSD disks. Latest USB interface allows you to enjoy the speed of modern M.2 SSD drives. Due the fast USB 3.2 Gen 2 interface is the transmission Speed up to 10Gb/s. Convenient connection allows reversible USB-C connector. The external M.2 box also supports other modern functions, e.g. TRIM. In the external box, NVMe M.2 SSD disks with a size up to 22x80 mm can be mounted. The box is not limited by capacity of SSD disks. M.2 cards may be one-sided or double-sided. The aluminum body of the box and the heat-conductive pads ensure very good cooling of the inserted M.2 SSD. Insert the M.2 SSD disk into this box and you can easily form a fast and compact external disk. The Box can be used with both computers and laptops, so with mobile phones and tablets with the OTG supporting function. Input: USB 3.2 Gen 2 / SuperSpeed+ USB rate of up to 10 Gbit/s. Connection via reversible USB type C female connector. Device support: NVMe M.2SSD disks, designed for M-key or B+M-key card formats, NGFF 75-pin M-key slot for NVMe M.2 drives. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.1 Gen 1 / USB 3.0. and USB 2.0. Supports transmission rates 10.000 / 5000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Support of M-key or B+M-key NVMe (PCI-Express) M.2 SSD disks without maximum capacity limitation. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a Compliant with NVM Express 1.3 Specifikation. Compliant with USB Mass Storage Class Specifikation. The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real bandwidth / transmission rate of the box is around 1000 MB/s (1 GB/s) is given by the limits of the USB 3.2 Gen 2 interface. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Support of TRIM functionality to limit gradual degradation of the SSD performance over time. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby Support - Drive asleep after 5 minutes of inactivity. Supplying the power via USB bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and the cooling pads helps to better cool the M.2 SSD. Higher surface temperature of the box is not a problem - thanks to the aluminum body, the heat generated by the operation of the disc is better dissipated and transferred to the surroundings. Connection via USB 3.2 Gen 2 Type-C female connector. USB Type-C male / USB Type-C male cable 22 cm long is included. Other data: External box dimensions 115 x 39 x 11 mm. External box weight 43 g (without USB cable and M.2 SSD disk). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher, Android (OS and device support required). Note: When operating under Windows 7, contact the manufacturer of the M.2 SSD to find whether this OS is supported. Package contains: USB-C 3.2 Gen 2 external box for NVMe M.2 SSD, USB type C type C cable 22 cm long, 3 thermally conductive pads, mounting material and a screwdriver, printed installation manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with clearly indicated parameters.

<p><b>AXAGON HMC-UFO USB-C 10Gbps UFO hub</b> expands your laptop, computer or tablet <b>with eight ports</b> and an external box for <b>M.2 drive</b>. You will connect your laptop to the <b>9in1 docking station</b> via the supplied USB-C 65 cm long cable. In no time, you have an integrated slot for an <b>NVMe</b> or <b>SATA M.2 drive</b>, <b>an SD</b> and <b>microSD card reader</b>, and connectors for connecting a <b>monitor</b>, <b>USB devices</b>, <b>headphones</b>, <b>network cable</b>,<b> and Power Delivery power</b>. Thunderbolt 3/4 compatibility also gives you a simple and compact docking station for a laptop such as the <b>Apple MacBook Air</b> or <b>Pro</b>.</p> <p>For the hub to function properly, your laptop's USB-C port must support video output (DisplayPort Alternate Mode or Thunderbolt 3 and above) and Power Delivery powered. </p> <p>You can connect a NVME or SATA <b>M.2 SSD</b> via the <b>built-in slot</b> on the top of the hub. The multiport hub thus becomes an external drive. M.2 cards can be single-sided or double-sided up to a size of 22x42, 22x60 and 22x80 mm. The external M.2 storage has no SSD capacity limitations, supports <b>TRIM</b> and <b>UASP</b>, and allows reading of <b>S.M.A.R.T.</b> information to monitor disk status.</p> <p>The <b>top cover</b> of the M.2 slot is made <b>of aluminum</b>, which provides optimal protection and heat dissipation. Screwless mounting makes changing discs quick and easy. A <b>passive heatsink</b> is included to effectively help reduce the temperature of M.2 drives. The vents around the cover ensure sufficient <b>air circulation</b>, which also supports <b>efficient heat dissipation</b>.</p> <p>The <b>HDMI output</b> enables the connection of an external monitor, TV or projector with a resolution of up to <b>4K/60Hz</b> Ultra HD, <b>2K/144Hz</b> Quad HD or <b>1080p/240Hz</b> Full HD and the transmission of multi-channel audio. Thanks to <b>HDR</b> support, you can enjoy a significantly expanded range of colors and contrasts.</p> <p><b>Two USB-A 10Gbps</b> outputs allow connection of external drives, flash drive, mouse, printer and other USB accessories. The USB ports <b>also charge mobile phones and tablets</b> with a power of up to 7.5W. The Hub is also equipped with a <b>combined USB-C port</b> that can be used for data transfer (USB 5Gbps) or for charging a laptop using a Power Delivery charger. With the use of a suitable PD charger, you can power not only the laptop, but also the hub itself, <b>with up to 100W</b> of power, thanks to <b>Power Delivery 3.0</b> technology.</p> <p>The <b>memory card reader</b> supports reading and writing of all versions of SD and microSD cards with a capacity of up to 2TB. The card reader enables <b>simultaneous handling of cards in both slots</b> and direct copying between them.</p> <p>You can use the <b>3.5 mm audio output</b> to connect stereo headphones, headset or active speakers. It is equipped with a high-quality <b>DAC converter</b>, which supports sampling up to <b>384 kHz at 24 bits</b>. You will enjoy superior sound quality that is ideal for <b>lossless formats</b> such as FLAC, WMA, WAV, APE, AAC and ALAC.</p> <p><b>Gigabit network card</b> extends your computer by a fast and stable network connection, adds the missing <b>RJ-45 network connector</b> or another network card.</p> <p>Thanks to the clever design with <b>four rubber pads</b> on the base, the station stays firmly in place. One of the most practical features is the <b>USB-C cable attachment</b>, which is neatly <b>wrapped around the base</b>. Thanks to this solution, you can easily unwind exactly the length of cable you currently need, which prevents excess <b>cable from taking up unnecessary space on your desk</b>.</p> <p>Thanks to the <b>Plug and Play</b> and <b>Hot Plug functions</b>, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of <b>connection to phones</b> with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone.</p> <p><b>Input (connection to a computer or mobile device):</b><br/> USB 10Gbps (USB 3.2 Gen 2), USB-C male connector.<br/> Compatible with USB 5Gbps, USB4, Thunderbolt 3/4.</p> <p><b>Input (power supply):</b><br/> USB Power Delivery 3.0 - 100W port, USB-C female connector.<br/> Powering the mobile device from the mains adapter via the USB-C hub.<br/> PD powering must be supported by both the mobile device and the mains charger.</p> <p><b>USB outputs:</b><br/> 2x USB 10Gbps port, USB-A female connector.<br/> 1x USB 5Gbps port for data transfer or Power Delivery charging, USB-C female connector.<br/> Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports.</p> <p><b>Video outputs:</b><br/> 1x HDMI port, HDMI A female connector.</p> <p><b>Maximum supported resolution:</b><br/> 1 monitor - up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD </p> <p><b>Video features:</b><br/> For Apple devices running macOS, the maximum refresh rate is usually limited to 60Hz.<br/> To achieve maximum resolution and frequency values on video outputs, the dock must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 4. A suitable updated OS and up-to-date graphics drivers are also required.<br/> HDR support (High dynamic range, 10 bit support) - realistic reproduction of light and dark details.<br/> HPD (Hot-Plug-Detect) support.<br/> TMDS (Transition Minimized Differential Signalling) support.<br/> Full support for HDCP 1.4 and 2.2 (High-bandwidth Digital Content Protection).<br/> Up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio format support.<br/> Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and target device, i.e. laptop/phone and TV/monitor/AV receiver.</p> <p><b>The card reader - two slots:</b> <br/> Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash.<br/> Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro.<br/> 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card.</p> <p><b>RJ-45 output:</b><br/> Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection.<br/> Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s.<br/> Supported IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications.<br/> 10/100/1000 Mb/s auto-detection.</p> <p><b>Audio output / input:</b><br/> 1x 3.5 mm 4pin jack for headset, headphones or active speakers,<br/> 2-channel analog stereo output 384 kHz @ 24 bit for playback, <br/> 192 kHz @ 24 bit analog microphone input for recording.</p> <p><b>M.2 SSD slot:</b><br/> NVMe & SATA M.2 SSD disks.<br/> Designed for M key or B+M key format cards.<br/> NGFF 75-pin M-key slot for M.2 drives.<br/> Support of M.2 drives with a size of 2242, 2260, 2280 mm.<br/> Support of both one-sided and double-sided M.2 SSDs.<br/> Compliant with PCI Express Base Specification Revision 3.1a specification.<br/> Compliant with NVM Express 1.3 specification.<br/> Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). <br/> Compliant with USB Mass Storage Class specification.<br/> Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later.<br/> Support of TRIM functionality to limit gradual degradation of the SSD performance over time.<br/> Support for booting from an SSD in the hub's M.2 slot.</p> <p><b>Other features:</b> <br/> Possibility to connect your device while running thanks to the Hot Plug support.<br/> Full Plug and Play support.<br/> Standby mode support.<br/> Power supply via USB bus - USB bus power.<br/> Power supply via PD charger (not included).<br/> The alminum cover of the M.2 slot helps to better dissipate heat. Higher surface hub temperature is not a problem - the heat generated by the hub and M.2 disk operation is better dissipated and transferred to the surroundings.<br/> The blue LED indicates with constant light the hub connection to the computer.<br/> High quality shielded cable ensures fast communication speed and minimal unwanted interference.<br/> Dimensions 32 x 110 x 100 mm (H x W x D).<br/> Weight 213 g (incl. cable).<br/> USB-C cable 65 cm long for connecting the hub to a laptop.</p> <p><b>Supported operating systems:</b><br/> Microsoft Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. <br/> Compatibility depends on the operating system and device manufacturer support.<br/> DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, tablet, phone).<br/> Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers.</p> <p><b>Package contains:</b><br/> USB-C hub with fixed 65 cm long cable,<br/> passive heatsink,<br/> 2 pcs thermal conductive pads,<br/> multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / UA / BG / CN / TR / ARA,<br/> packed in a cardboard box.</p>

AXAGON HMC-UFO USB-C 10Gbps UFO hub expands your laptop, computer or tablet with eight ports and an external box for M.2 drive. You will connect your laptop to the 9in1 docking station via the supplied USB-C 65 cm long cable. In no time, you have an integrated slot for an NVMe or SATA M.2 drive, an SD and microSD card reader, and connectors for connecting a monitor, USB devices, headphones, network cable, and Power Delivery power. Thunderbolt 3/4 compatibility also gives you a simple and compact docking station for a laptop such as the Apple MacBook Air or Pro. For the hub to function properly, your laptop's USB-C port must support video output (DisplayPort Alternate Mode or Thunderbolt 3 and above) and Power Delivery powered. You can connect a NVME or SATA M.2 SSD via the built-in slot on the top of the hub. The multiport hub thus becomes an external drive. M.2 cards can be single-sided or double-sided up to a size of 22x42, 22x60 and 22x80 mm. The external M.2 storage has no SSD capacity limitations, supports TRIM and UASP, and allows reading of S.M.A.R.T. information to monitor disk status. The top cover of the M.2 slot is made of aluminum, which provides optimal protection and heat dissipation. Screwless mounting makes changing discs quick and easy. A passive heatsink is included to effectively help reduce the temperature of M.2 drives. The vents around the cover ensure sufficient air circulation, which also supports efficient heat dissipation. The HDMI output enables the connection of an external monitor, TV or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD or 1080p/240Hz Full HD and the transmission of multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colors and contrasts. Two USB-A 10Gbps outputs allow connection of external drives, flash drive, mouse, printer and other USB accessories. The USB ports also charge mobile phones and tablets with a power of up to 7.5W. The Hub is also equipped with a combined USB-C port that can be used for data transfer (USB 5Gbps) or for charging a laptop using a Power Delivery charger. With the use of a suitable PD charger, you can power not only the laptop, but also the hub itself, with up to 100W of power, thanks to Power Delivery 3.0 technology. The memory card reader supports reading and writing of all versions of SD and microSD cards with a capacity of up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. You can use the 3.5 mm audio output to connect stereo headphones, headset or active speakers. It is equipped with a high-quality DAC converter, which supports sampling up to 384 kHz at 24 bits. You will enjoy superior sound quality that is ideal for lossless formats such as FLAC, WMA, WAV, APE, AAC and ALAC. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. Thanks to the clever design with four rubber pads on the base, the station stays firmly in place. One of the most practical features is the USB-C cable attachment, which is neatly wrapped around the base. Thanks to this solution, you can easily unwind exactly the length of cable you currently need, which prevents excess cable from taking up unnecessary space on your desk. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (connection to a computer or mobile device): USB 10Gbps (USB 3.2 Gen 2), USB-C male connector. Compatible with USB 5Gbps, USB4, Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 - 100W port, USB-C female connector. Powering the mobile device from the mains adapter via the USB-C hub. PD powering must be supported by both the mobile device and the mains charger. USB outputs: 2x USB 10Gbps port, USB-A female connector. 1x USB 5Gbps port for data transfer or Power Delivery charging, USB-C female connector. Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports. Video outputs: 1x HDMI port, HDMI A female connector. Maximum supported resolution: 1 monitor - up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60Hz. To achieve maximum resolution and frequency values on video outputs, the dock must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 4. A suitable updated OS and up-to-date graphics drivers are also required. HDR support (High dynamic range, 10 bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.2 (High-bandwidth Digital Content Protection). Up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio format support. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and target device, i.e. laptop/phone and TV/monitor/AV receiver. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3i 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Audio output / input: 1x 3.5 mm 4pin jack for headset, headphones or active speakers, 2-channel analog stereo output 384 kHz @ 24 bit for playback, 192 kHz @ 24 bit analog microphone input for recording. M.2 SSD slot: NVMe & SATA M.2 SSD disks. Designed for M key or B+M key format cards. NGFF 75-pin M-key slot for M.2 drives. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Support of TRIM functionality to limit gradual degradation of the SSD performance over time. Support for booting from an SSD in the hub's M.2 slot. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus - USB bus power. Power supply via PD charger (not included). The alminum cover of the M.2 slot helps to better dissipate heat. Higher surface hub temperature is not a problem - the heat generated by the hub and M.2 disk operation is better dissipated and transferred to the surroundings. The blue LED indicates with constant light the hub connection to the computer. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 32 x 110 x 100 mm (H x W x D). Weight 213 g (incl. cable). USB-C cable 65 cm long for connecting the hub to a laptop. Supported operating systems: Microsoft Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 65 cm long cable, passive heatsink, 2 pcs thermal conductive pads, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / UA / BG / CN / TR / ARA, packed in a cardboard box.

<p>The AXAGON PCEM2-1U internal adapter allows connecting an M.2 SSD disk to a desktop computer using a PCI-Express bus.</p> <p>The well thought-out design and ultra compact size of the adapter allow using it easily in a desktop computer not equipped with an M.2 slot. The card is also ideal for a rack 1U server and low profile cases. Its unique design allows using it not only in x16 slots, but also in x4 and x8 slots.</p> <p>The adapter supports the use of NVMe (PCI-Express) M.2 SSD disks, both one-sided and double-sided ones. The reduction does not have a limit of SSD disk capacities and M.2 cards with a size of up to 22x80 mm can be used. Due to the PCI-Express 3.0 4-lane interface rates of up to 8 GBps can be achieved.</p> <p>The thermally conductive pads and coppered vents help to remove better heat generated during the operation of M.2 SSD disks. The LED indication indicates connection and data transfer.</p> <p><strong>Input:</strong></p> <ul> <li>PCI-Express 3.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.0 / 2.1.</li> <li>Number of 4-Lane lines, compatible with x4 / x8 / x16 PCIe slots.</li> <li>Bandwidth of the 4-Lane PCI-Express 3.0 bus of up to 8 GB/s (two-way).</li> </ul> <p><strong>Output:</strong><br /> NGFF 75-pin M-key slot to install the NVMe (PCI-Express) M.2 SSDs.</p> <p><strong>Other features:</strong></p> <ul> <li>Full Plug and Play support.</li> <li>Support of M.2 disks of size - 2230, 2242, 2260, 2280 mm.</li> <li>Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit.</li> <li>Support of both one-sided and double-sided M.2 disks.</li> <li>A better dissipation of heat due to coppered vents and thermally conductive pad.</li> <li>Support of booting from SSD card.</li> <li>Possibility of using in 1U rack servers.</li> <li>Dimensions: 90 x 22 x 5 mm, weight: 10 g.  </li> <li>No drivers need to be installed.</li> </ul> <p><strong>Power supply:</strong><br /> The adapter is supplied directly from a PCI-Express bus,  external power supply is not necessary.</p> <p><strong>Supported operating systems:</strong><br /> MS Windows 7 / 8 / 8.1 / 10, Windows Server 2008 R2 / 2012 / 2016 (all 32-bit as well as 64-bit versions of OS Windows are supported), Linux with kernel 2.6.31 and higher.<br /> Note: When operating under Windows 7, contact the manufacturer of the M.2 SSD to find whether this OS is supported.</p> <p><strong>Package contains:</strong><br /> PCI-Express adapter,<br /> 1 thermally conductive pad,<br /> Mounting material and a screwdriver,<br /> Printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA,<br /> Packaged in a cardboard box.</p>

The AXAGON PCEM2-1U internal adapter allows connecting an M.2 SSD disk to a desktop computer using a PCI-Express bus. The well thought-out design and ultra compact size of the adapter allow using it easily in a desktop computer not equipped with an M.2 slot. The card is also ideal for a rack 1U server and low profile cases. Its unique design allows using it not only in x16 slots, but also in x4 and x8 slots. The adapter supports the use of NVMe (PCI-Express) M.2 SSD disks, both one-sided and double-sided ones. The reduction does not have a limit of SSD disk capacities and M.2 cards with a size of up to 22x80 mm can be used. Due to the PCI-Express 3.0 4-lane interface rates of up to 8 GBps can be achieved. The thermally conductive pads and coppered vents help to remove better heat generated during the operation of M.2 SSD disks. The LED indication indicates connection and data transfer. Input: PCI-Express 3.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.0 / 2.1. Number of 4-Lane lines, compatible with x4 / x8 / x16 PCIe slots. Bandwidth of the 4-Lane PCI-Express 3.0 bus of up to 8 GB/s (two-way). Output: NGFF 75-pin M-key slot to install the NVMe (PCI-Express) M.2 SSDs. Other features: Full Plug and Play support. Support of M.2 disks of size - 2230, 2242, 2260, 2280 mm. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of both one-sided and double-sided M.2 disks. A better dissipation of heat due to coppered vents and thermally conductive pad. Support of booting from SSD card. Possibility of using in 1U rack servers. Dimensions: 90 x 22 x 5 mm, weight: 10 g. No drivers need to be installed. Power supply: The adapter is supplied directly from a PCI-Express bus, external power supply is not necessary. Supported operating systems: MS Windows 7 / 8 / 8.1 / 10, Windows Server 2008 R2 / 2012 / 2016 (all 32-bit as well as 64-bit versions of OS Windows are supported), Linux with kernel 2.6.31 and higher. Note: When operating under Windows 7, contact the manufacturer of the M.2 SSD to find whether this OS is supported. Package contains: PCI-Express adapter, 1 thermally conductive pad, Mounting material and a screwdriver, Printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, Packaged in a cardboard box.

The internal AXAGON PCEM2-DC adapter allows to connect up to two M.2 SSDs to a desktop. So, it is an ideal choice for upgrading a desktop that has no M.2 slot. The adapter supports the use of both one-sided and double-sided SATA and NVMe (PCI Express) M.2 SSDs. The reduction does not limit SSD capacity, and any M.2 cards with a length up to 110 mm can be used. The simultaneous operation of both disks is commonplace. Thanks to PCI-Express 3.0 4-lane interface compatible with x4, x8 and x16 slots, a speed as high as 8GBps can be achieved. When compared to standard SATA SSDs, bit rates of NVMe SSDs are many times higher. The high quality card design, including copper-plated vents, assists in a better dissipation of heat generated during the M.2 SSDs operation. A metal cover with fan and an attached passive cooler, incl. thermal pads, assist in M.2 SSDs cooling. It results in an ideal combination of passive and active cooling of M.2 SSDs and heat removal. Thanks to the cooling and temperature reduction by up to 35°C, it is possible to use the maximum power of deployed SSDs. Double blue LEDs indicate either power on or data transfer in the M.2 slot. The package also contains a low profile blanking plug for mounting the adapter into low profile cases. Input: PCI-Express 3.0 interface compatible with PCI-Express 1.0a / 1.1 / 2.0 / 2.1. Number of 4-Lane lines, compatible with x4 / x8 / x16 PCIe slots. Bandwidth of 4-Lane PCI-Express 3.0 bus of up to 8 GB/s (two-way). SATA connector to connect the motherboard when a SATA M.2 SSD is used.To achieve the best possible bit rates, the use of a SATA 6G controller is recommended. Output: NGFF 75-pin M-key slot to install the NVMe (PCI-Express) M.2 SSDs. NGFF 75-pin B-key slot to install the SATA (AHCI) M.2 SSDs. Other features: Full Plug and Play support. Support of M.2 disks of any size - 2230, 2242, 2260, 2280, 22110 mm. Support of M.2 disks of any capacity. Simultaneous operation of both disks. Support of both one-sided and double-sided M.2 disks. A better dissipation of heat from M.2 SSDs thanks to copper-plated vents. A metal cover with fan supplied from the card. An auxiliary fin cooler to provide a superior cooling option for M.2 SSD. Support of booting from SSD card. No drivers need to be installed. Card dimensions: 140 x 68 x 17 mm, weight 111 g. Note: CAUTION! The adapter allows to insert B+M-key disks in both M.2 slots. It is important to check the disk parameters, i.e. to make sure whether the disk is designed for SATA or NVMe (PCI-Express) interface, and to connect it to the right slot. SATA SSDs are connected to B-key slot, NVMe SSDs are connected to M-key slot. Power supply: The adapter is directly supplied from PCI-Express bus; no external power supply is needed. The system of dual power supply ensures a sufficient power for connected M.2 SSDs. In addition, the system of redundant power supply reduces the adapter thermal load. Supported operating systems: MS Windows 7 / 8 / 8.1 / 10, Windows Server 2008 R2 / 2012 / 2016 (all 32-bit as well as 64-bit versions of OS Windows are supported), Linux with kernel 2.6.31 and higher. Note: When operating under Windows 7, contact the manufacturer of the M.2 SSD to find whether this OS is supported, especially when NVMe disks are used. Package contains: PCI-Express adapter with a standard blanking plug and a cover with fan, passive cooler for M.2 SSD and 2 thermal pads, low profile blanking plug, mounting material and a screwdriver, printed installation manual CZ / EN / DE / ESP / FR / HU / IT / PL / RO / RU / SK / BG, packed in a cardboard box with clearly indicated parameters.

The AXAGON PCEM2-N internal adapter allows connecting an M.2 SSD disk to a desktop computer using a PCI-Express bus. High-quality construction, compact size, and well thought-out design make the adapter an ideal choice for upgrading a desktop computer that is not equipped with an M.2 slot. The adapter supports the use of NVMe (PCI-Express) M.2 SSD disks, both one-sided and double-sided ones. The reduction does not have a limit of SSD disk capacities and M.2 cards with a size of up to 22x80 mm can be used. Thanks to PCI-Express interface compatible with x4, x8 and x16 slots, a maximum transmission rates can be achieved. The thermally conductive pad and coppered vents help to remove better heat generated during the operation of M.2 SSD disks. The LED indication indicate either connection or data transfer in the M.2 slot. The package also contains a low profile bracket for mounting the adapter into low profile cases.Input: • PCI-Express interface, compatible version PCI-Express: 4.0 / 3.0 / 2.1 / 2.0 / 1.1 / 1.0a.• Number of 4-Lane lines, compatible with x4 / x8 / x16 PCIe slots.Output: • NGFF 75-pin M-key slot to install an NVMe (PCI-Express) M.2 SSD diskOther features: • Full Plug and Play support.• Support of M.2 disks with the sizes – 2230, 2242, 2260, 2280 mm.• Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit.• Support of both one-sided and double-sided M.2 disks.• Better heat removal due to the coppered vents and thermally conductive pad.• Support of booting from an SSD card.• Dimensions 105 x 49 x 8 mm.• Weight 32 g.• The installation of drivers is not required.Supported operating systems: • MS Windows 7 / 8 / 8.1 / 10 /11, Windows Server 2008 R2 / 2012 / 2016 (all 32- and 64-bit versions of Windows supported), and Linux with kernel 2.6.31 and higher.• Note: When operating under Windows 7, contact the manufacturer of the M.2 SSD to find whether this OS is supported

The internal AXAGON PCEM2-S adapter allows to connect the M.2 SSD to a desktop coputer using PCI-Express bus. High-quality construction, compact dimensions, attractive design and sophisticated cooling make the adapter an ideal choice for upgrading a desktop computer that is not equipped with any M.2 slot. The adapter supports the use of both one-sided and double-sided NVMe (PCI-Express) M.2 SSDs. The reduction does not limit SSD capacity, and any M.2 cards with a size up to 22x80 mm can be used. Thanks to PCI-Express interface, a maximum transmission rates can be achieved. The aluminum cover functioning as a cooler and the attached thermally conductive pads help to cool the M.2 SSD. As a result, an ideal combination of M.2 SSD cooling and heat discharging is achieved. LED indicates either power on or data transfer in the M.2 slot. Input: PCI-Express interface, compatible version PCI-Express: 4.0 / 3.0 / 2.1 / 2.0 / 1.1 / 1.0a. Number of 4-Lane lines compatible with x16 PCIe slots. Output: NGFF 75-pin M-key slot for the installation of NVMe (PCI-Express) of M.2 SSD. Other features: Full Plug and Play support. Support of M.2 drives with a size of 2230, 2242, 2260, and 2280 mm. Support of M-key or B+M-key NVMe (PCI-Express) M.2 SSDs drives without limitation of maximum capacity. Support of both one-sided and double-sided M.2 drives. A better heat discharge thanks to plated vents, thermally conductive pads and aluminum cover. Support of booting from SSD card. Dimensions 103 x 40 x 8 mm. Weight 32 g. No drivers need to be installed. Power supply: The adapter is directly supplied from PCI-Express bus; no external power supply is needed. Supported operating systems: MS Windows 7 / 8 / 8.1 / 10, Windows Server 2008 R2 / 2012 / 2016 (all 32-bit as well as 64-bit versions of OS Windows are supported), Linux with kernel 2.6.31 and higher. Note: When operating under Windows 7, contact the manufacturer of the M.2 SSD to find whether this OS is supported. Package contains: PCIe adapter for M.2 NVMe (PCI-Express) SSD with the aluminum cover, 3 thermally conductive pads, mounting material and a screwdriver, printed installation manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

The AXAGON PCEM2-XS internal adapter allows connecting an NVMe M.2 SSD disk to a desktop computer using a PCI-Express bus. Its high-quality workmanship, compact size, attractive design, and and sophisticated cooling make this adapter an ideal choice for upgrading a desktop computer not equipped with an M.2 slot. The adapter supports the use of single-sided and double-sided NVMe (PCI-Express) M.2 SSD drives. The reduction does not have a limit of SSD disk capacities and M.2 cards with dimensions of up to 22x80 mm can be used. Thanks to the PCI-Express interface, it is possible to achieve maximum transfer speeds. The LED indication indicates connection or data transfer in the M.2 slot. The adapter is equipped with a ribbed aluminum disc cover that serves as a passive heatsink. Thanks to the large cooling surface and supplied thermal pads, the cooler dissipates heat from both sides of the M.2 disk and thus achieves maximum cooling efficiency. This makes it ideal even for demanding PCIe 5.0 NVMe SSDs. Input: PCI-Express interface, compatible PCI-Express versions: 5.0 / 4.0 / 3.0 / 2.1 / 2.0 / 1.1 / 1.0a. Number of 4-Lane lines, compatible with x4 / x8 / x16 PCIe slots. Output: NGFF 75-pin M-key slot to install an NVMe (PCI-Express) M.2 SSD disk. Other features: Full Plug and Play support. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of both one-sided and double-sided M.2 disks. Better heat dissipation due to the coppered vents, heat-conductive pads, and aluminium cooler. Support of booting from an SSD card. Dimensions: 105 x 45 x 12 mm. Weight 50 g. No drivers need to be installed. Power: The adapter is powered directly from the PCI-Express bus, no external power supply required. Supported OS: Windows, Linux. Note: When Windows 7 is used, the support of this OS must be checked with the M.2 SSD disk manufacturer. Package contains: PCIe adapter for M.2 NVMe (PCI-Express) SSD with aluminum heat sink, thermal conductive pads, mounting kit and screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Universal external AXAGON EEM2-SB2 RAW box with USB 3.2 Gen2 interface is designed for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. The package includes not only a USB-C -> USB-C cable for connecting the box to a computer, but also a USB-C -> USB-A adapter. You can connect the box to any free USB port on the notebook. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern functions, e.g. UASP, TRIM and allows reading S.M.A.R.T. information that monitors the status of the disk. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of three different lengths of SSD cards - 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Screwless box opening facilitates assembly and disassembly of the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in black colour with an elegant brushed finish that prevents unwanted fingerprints. The rounded box design promises pleasant use. The aluminum box body, cooling holes and thermal conductive pad provides very good cooling of the inserted M.2 SSD disk. This extends its service life and also prevents the disk from slowing down, so-called "Thermal Throttling". By inserting the M.2 SSD in the box, you will easily create fast compact external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps. Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key and B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports transmission rates 10 000 / 5 000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - Drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body, cooling holes and thermal conductive pad helps to cool the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable 20 cm long and USB type C female / USB type A male adapter are included. Other data: External box dimensions 94 x 41 x 10 mm. External box weight 35 g (without USB cable and M.2 SSD disk). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher, Android (OS and device support required). Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 3.2 Gen 2 combined external box for SATA M.2 SSD, USB-C - USB-C cable, 20 cm long with USB-C - USB-A adapter, 1 thermal conductive pad, mounting material, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.