PLA-Silk is a durable and easy to use filament characterized by intense color and exceptional gloss. Prints made with the PLA-Silk product line filament have an eye-catching luminous surface.Applicationdecorationselements of interior design, luminous sculptures,toys, figurinesgadgets (e.g. pendants, key rings)PLA Silk is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: red copperDiameter: 1.75 mmWeight: 800 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PLA-Silk is a durable and easy to use filament characterized by intense color and exceptional gloss. Prints made with the PLA-Silk product line filament have an eye-catching luminous surface.Applicationdecorationselements of interior design, luminous sculptures,toys, figurinesgadgets (e.g. pendants, key rings)PLA Silk is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. Printable model for refill spool sides you can download here:PRODUCT PARAMETERSColor: silk goldDiameter: 1.75 mmWeight: 1000 g (vacuum packed) (refill packing (without plastic spool)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk Dragon Fruit combines two parallel colors in a single filament (green and fuchsia) as a result of the coextrusion process.Application:decorations (e.g. interior design elements such as lamp shades or vases)toys (e.g. figurines)gadgets (e.g. key rings, pendants)printing personalized gifts.Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: green / fuchsiaDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk Gold-Silver combines two parallel colors in a single filament (green and black) as a result of the coextrusion process. Application: decorations (e.g. interior design elements such as lamp shades or vases) toys (e.g. figurines) gadgets (e.g. key rings, pendants) printing personalized gifts. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: gold / silver Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa
PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk Storm Shadow combines three parallel colours in a single filament (blue, graphite and steel) as a result of the coextrusion process. Application: decorations (e.g. interior design elements such as lamp shades or vases) toys (e.g. figurines) gadgets (e.g. key rings, pendants) printing personalized gifts. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 195-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: gold / silver Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa
PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk Treasure combines three parallel colours in a single filament (gold, copper and bronze) as a result of the coextrusion process. Application: decorations (e.g. interior design elements such as lamp shades or vases) toys (e.g. figurines) gadgets (e.g. key rings, pendants) printing personalized gifts. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 195-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: gold / silver Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa
PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk Midnight City combines teo parallel colours in a single filament (blue, fuchsia) as a result of the coextrusion process. Application: decorations (e.g. interior design elements such as lamp shades or vases) toys (e.g. figurines) gadgets (e.g. key rings, pendants) printing personalized gifts. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 195-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: blue/ fuchsia Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa
PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk Mistic Green combines two parallel colors in a single filament (green and black) as a result of the coextrusion process. Application: decorations (e.g. interior design elements such as lamp shades or vases) toys (e.g. figurines) gadgets (e.g. key rings, pendants) printing personalized gifts. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: green / black Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa
PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk Mistic Purple combines two parallel colors in a single filament (graphite and fuchsia) as a result of the coextrusion process.Application:decorations (e.g. interior design elements such as lamp shades or vases)toys (e.g. figurines)gadgets (e.g. key rings, pendants)printing personalized gifts.Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: graphite / fuchsiaDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk mistic red combines two parallel colors in a single filament (red and black) as a result of the coextrusion process.Application:decorations (e.g. interior design elements such as lamp shades or vases)toys (e.g. figurines)gadgets (e.g. key rings, pendants)printing personalized gifts.Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: red/blackDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PLA Magic Silk is a 3D printing filament based on PLA-Silk. PLA Magic Silk Pink Dynamic combines two parallel colors in a single filament (pink and violet) as a result of theApplication:decorations (e.g. interior design elements such as lamp shades or vases)toys (e.g. figurines)gadgets (e.g. key rings, pendants)printing personalized gifts.Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: pink / violetDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PLA-Silk is a durable and easy to use filament characterized by intense color and exceptional gloss. Prints made with the PLA-Silk product line filament have an eye-catching luminous surface.Applicationdecorationselements of interior design, luminous sculptures,toys, figurinesgadgets (e.g. pendants, key rings)PLA Silk is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. Printable model for refill spool sides you can download here:PRODUCT PARAMETERSColor: silk steelDiameter: 1.75 mmWeight: 1000 g (vacuum packed) (refill packing (without plastic spool)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: whiteDiameter: 1.75 mmWeight: 1000 g (vacuum packed) refill packing without plastic spoolDensity: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: whiteDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PLA Starter filament by Rosa3D was created for beginners of 3D printng. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: whiteDiameter: 1.75 mmWeight: 3 kg (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: greenDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
ROSA-Flex 85A is a technical TPU filament. It can be used wherever elements resistant to chemical reagents and mechanical damage are needed. Printouts made of this material can be squeezed and stretched many times without damaging the original shape. The material is characterized by both excellent interlayer adhesion and adhesion to many work surfaces.Application examples:gaskets, bumpers, anti-vibration dampers/feetsmartphone cases and devices housingscomponents for dronescomponents for RC carsROSA-flex 85A is a thermoplastic polyurethane from ROSA3D. The material is designed for technical applications. Thanks to its flexibility and outstanding interlayer adhesion, it is suitable for all applications where mechanical resistance and tensile strength are required. It can be repeatedly squeezed and stretched without changing it’s original shape. The filament is characterized by exceptional chemical resistance. It is resistant to greases, oils and many solvents. The complete chemical resistance table can be found in ‘files to download’ section.The filament is intended for intermediate users who already have experience with 3D printing.Recommended printing parameters:extrusion temperature: 215-250 ° Cbed temperature: 30-60 ° Cprint cooling: 0-100% (depends on the geometry of the model)printing speed: 15-50 mm/s (we recommend starting slowly and gradually trying to increase the speed)compatible bed surfaces: glass, smooth PEI, textured PEI.Filament does not require a heated bed or chamber. In case of problems with adhesion, we recommend the use of an adhesive agent. It is recommended to enable print cooling. Fan speed should be adjusted according to printer capabilities and geometry of the printed object.PRODUCT PARAMETERS:Diameter: 1.75 mmNet weight: 500 gSpool weight: 245 gROSA-Flex 85A PHYSICAL PARAMETERS:Density: 1.18 g / cm3Odor: odorlessElongation at break: 520%
ROSA-Flex 85A is a technical TPU filament. It can be used wherever elements resistant to chemical reagents and mechanical damage are needed. Printouts made of this material can be squeezed and stretched many times without damaging the original shape. The material is characterized by both excellent interlayer adhesion and adhesion to many work surfaces. Application examples: gaskets, bumpers, anti-vibration dampers/feet smartphone cases and devices housings components for drones components for RC cars ROSA-flex 85A is a thermoplastic polyurethane from ROSA3D. The material is designed for technical applications. Thanks to its flexibility and outstanding interlayer adhesion, it is suitable for all applications where mechanical resistance and tensile strength are required. It can be repeatedly squeezed and stretched without changing it’s original shape. The filament is characterized by exceptional chemical resistance. It is resistant to greases, oils and many solvents. The complete chemical resistance table can be found in ‘files to download’ section. The filament is intended for intermediate users who already have experience with 3D printing. Recommended printing parameters: extrusion temperature: 215-250 ° C bed temperature: 30-60 ° C print cooling: 0-100% (depends on the geometry of the model) printing speed: 15-50 mm/s (we recommend starting slowly and gradually trying to increase the speed) compatible bed surfaces: glass, smooth PEI, textured PEI. Filament does not require a heated bed or chamber. In case of problems with adhesion, we recommend the use of an adhesive agent. It is recommended to enable print cooling. Fan speed should be adjusted according to printer capabilities and geometry of the printed object. PRODUCT PARAMETERS: Diameter: 1.75 mm Net weight: 500 g Spool weight: 245 g ROSA-Flex 85A PHYSICAL PARAMETERS: Density: 1.18 g / cm3 Odor: odorless Elongation at break: 520%
ROSA-Flex 96A is a technical TPU filament. It can be used wherever elements resistant to chemical reagents and mechanical damage are needed. Printouts made of this material can be squeezed and stretched many times without damaging the original shape. The material is characterized by both excellent interlayer adhesion and adhesion to many work surfaces.Application examples:gaskets, bumpers, anti-vibration dampers/feetsmartphone cases and devices housingscomponents for dronescomponents for RC carsROSA-flex 96A is a thermoplastic polyurethane from ROSA3D. The material is designed for technical applications. Thanks to its flexibility and outstanding interlayer adhesion, it is suitable for all applications where mechanical resistance and tensile strength are required. It can be repeatedly squeezed and stretched without changing it’s original shape. The filament is characterized by exceptional chemical resistance. It is resistant to greases, oils and many solvents. The complete chemical resistance table can be found in ‘files to download’ section.What’s more, the ROSA-Flex 96A filament is made of ingredients approved for contact with food. In case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parameters:extrusion temperature: 210-250 ° Cbed temperature: 50-70 ° Cprint cooling: 0-100% (depends on the geometry of the model)printing speed: 15-50 mm/s (we recommend starting slowly and gradually trying to increase the speed)compatible bed surfaces: glass, smooth PEI, textured PEI.Filament does not require a heated bed or chamber. In case of problems with adhesion, we recommend the use of an adhesive agent. It is recommended to enable print cooling. Fan speed should be adjusted according to printer capabilities and geometry of the printed object.PRODUCT PARAMETERS:Diameter: 1.75 mmNet weight: 500 gSpool weight: 245 gROSA-Flex 85A PHYSICAL PARAMETERS:Density: 1.22 g / cm3Odor: odorlessElongation at break: 350%
ROSA-Flex 96A is a thermoplastic polyurethane (TPU). It is intended for intermediate users of 3D printers who want to start their adventure with printing from flexible materials. The ROSA-Flex 96A filament is hard enough to be printed even on printers with Bowden feeding. In addition, it does not require a closed chamber and will easily stick to many work surfaces (eg. glass, smooth PEI, textured PEI, alluminum). ROSA-Flex 96A has excellent interlayer adhesion. Filament made of TPU will be perfect if you need elements resistant to chemical reagents and mechanical damage. Prints can be squeezed and stretched many times without permanently changing their original shape. You can print use it to print a protective case for your smartphone in one of the many vivid colors. ROSA-Flex 96A is a durable technical material, resistant to oils, greases and many solvents. What's more, ROSA-Flex 96A filament was made of components approved for contact with food, complying with FDA 21CFR177.2600 and the amendment of the Commission (EU) 10/2011. For products that come into contact with food, the certification lies with the manufacturer of the final product. APPLICATIONHobby: smartphone cases, drone elements, elements for RC carsTechnical: gaskets, bumpers, anti-vibration dampers / feet, housings, orthoses HOW TO PRINTRecommended printing temperature 220-250°CRecommended bed temperature: 30-60°CRecommended cooling:50-100% (depends on the geometry of the model)Recommended print speed: 15-50 mm/s (we recommend starting slowly and gradually trying to increase the speed)Compatible bed materials: glass, smooth PEI, textured PEI, alluminum. TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0.05 mmOval tolerance +/- 0.02 mmNet weight 1000 gPrint temperature 220-250 °CBed temperature 30-60 °C HYSICAL PARAMETERSDensity 1,22 g/cm3Odor OdorlessTensile elongation 350 % (EN 12803)Vicat softening point 126°C (ISO 306)
Easy Operation: One-button Vacuuming by using an electric pump, saves your time as well as improves the efficiency. Strong suction for fast pumping, small, portable, pumping speed is 3000mL/min and suction power is up to 60Kpa. Built-in rechargeable battery, no need to plug in during use, easy one-handed operation without wire entanglement. Improved Print Quality: 3D printing filaments have hygroscopicity, moisture can cause printing failure. Use a vacuum bag to create a vacuum environment to preventing the filament from absorbing moisture and dust. Maintain the integrity and quality of the filament, thereby effectively solving problems such as filament drawing, blockage, and poor adhesion during printing and improving printing quality. Durable and Recycling: Made of thickened material bags flexible and durable not easy to deform or break. Design using double sealed zippers and air vents with sealed covers. After strict material selection and testing, these storage bags is reliable, durable, and reusable, ensuring a stable vacuum sealing effect, allowing you to store your filaments with confidence. Large Size Vacuum Bags: Creality 3D printer filament vacuum storage bags is a large size of 40x40cm. Compatible with all 0.5KG/0.75KG/1KG or 1.75mm/2.85mm/3mm filaments and all kinds of filament like PLA ABS PETG TPU PA Silk PLA Plus. Creality Filament Storage Vacuum Bag kit includes: 40*40CM sealed bag 8pcs Desiccant 8pcs Electric vacuum pump 1pcs Vacuum pumping spiral head 1pcs Ball inflatable nozzle 1pcs Swimming ring inflatable nozzle 1pcs Toy inflatable nozzle 1pcs Charging cable 1pcs
<p>Flashforge ABS filament is designed for high‑quality 3D printing. With a 3mm diameter and 1kg spool, it delivers strong, durable, and precise prints. The white color provides a clean finish, ideal for prototypes, functional parts, and design projects. ABS material offers excellent toughness, heat resistance, and machinability, making it suitable for professional and hobbyist use.</p>
