Juhtmevaba laadija Scangrip MAG PRO WIRELESS käsivalgustile
Tootekood: 03.5928Töövalgustite tarvikud
Akulaadimise uusimat tehnoloogiat kasutav intelligentne SCANGRIP CHARING PAD võimaldab käsivalgusti MAG PRO WIRELESS (03.5691) lihtsat ja kiiret automaatset laadimist, kuid toimib ka lambi mugava hoidikuna töökojas.<br>Laadimisalus on disainitud nii, et lamp "libiseb” automaatselt õigesse positsiooni tänu tagaküljel asuvatele võimsatele magnetitele. Seetõttu saab selle kompaktse disainiga üliõhukese laadimisaluse paigaldada peaaegu kõikjale: töölauale, seinale või isegi lae alla, eemaldades lihtsalt kaks keeratavat korki ja kasutades kahte 4 mm kruvi.<br>Intelligentne objektituvastus tähendab, et laadimisalust saab kasutada ka enamiku mobiiltelefonide ja muude ühilduvate seadmete laadimiseks.<br>Punane LED-tuli teavitab laadimisaluse olekust. See vilgub sisselülitamisel 5 korda ja ooterežiimis iga 10 sekundi järel. Laadimise ajal põleb see pidevalt ja vilgub kiiresti, kui tuvastatakse viga. <br><br>Sisendvõimsus: 100-240 V / 50-60 Hz / 0.2 A<br>Väljundvõimsus: 5 V DC/ 1.0 A<br> Energiatarve: Max. 5 W<br> Töötemperatuur: -10° kuni 40°C<br>Kaitseklass: IK07 / IP20<br>Mõõdud: 183 x 84 x 13 mm<br>Kaal: 115 g<br><br>Laadimisalus tarnitakse ilma kaablita (vajalik USB - USB-C kaabel)<br><br><iframe width="560" height="315" src="https://www.youtube.com/embed/kY_Cp4Yps_A?si=ti34PfpRRCB4U6SA" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
GTIN: 5900495657565NUTISEADME TARVIKUD>KAANED JA ÜMBRISED>KAANED
Sobib mudelile HUAWEI P20 PRO/ P20 +. Tootepildid on illustreeriva tähendusega. Tegelik toote värv võib pisut erineda pildil olevast. <p>Tootepildid on illustreeriva tähendusega. Tegelik toote värv võib pisut erineda pildil olevast.</p>
GTIN: 5900495691958NUTISEADME TARVIKUD>KAANED JA ÜMBRISED>KAANED
Sobib mudelile HUAWEI P20 PRO/ P20 + Tootepildid on illustreeriva tähendusega. Tegelik toote värv võib pisut erineda pildil olevast. <p>Tootepildid on illustreeriva tähendusega. Tegelik toote värv võib pisut erineda pildil olevast.</p>
Tugevad tahvelarvuti kaitsekaaned katavad täielikult Sinu seadme ja on parim valik kontorisse ning kontorist väljas kasutamiseks. Kerged ja vastupidavad kaitsekaaned hoiavad Sinu tahvelarvutit
Tugevad tahvelarvuti kaitsekaaned katavad täielikult Sinu seadme ja on parim valik kontorisse ning kontorist väljas kasutamiseks. Kerged ja vastupidavad kaitsekaaned hoiavad Sinu tahvelarvutit
Praktiline ja ilus kaanega ümbris, millel on välja lõigatud kõik avaused, et saaksid telefoni mugavalt kasutada. Telefon on turvaliselt TPU materjalist pesas 1 kaarditasku
Üleni ökonahast valmistatud Tech-Protect Wallet kaitsekaaned, mis tagab telefonile suurepärast kaitset ning mahutavad Sinu igapäevaseks kasutamiseks olevad kaardid ja sularaha. Valmistatud
Suurepärane seikluskaaslane Sinu tahvelarvutile - Tech-Protect Solid 360 kaitseümbris, mis kaitseb Sinu tahvlit efektiivselt igast küljest. Kerge ja ergonoomiline disain Püsib
Stiilne Spigen Ultra Hybrid läbipaistev kaitseümbris laseb Su telefoni disainil välja paista andes seejuures telefonile piisava kaitse. Õhuke ja taskusõbralik Püsib
GTIN: 5900495662217NUTISEADME TARVIKUD>KAANED JA ÜMBRISED>KARASTATUD KLAAS
Sobib mudelile HUAWEI P20 PRO. Tootepildid on illustreeriva tähendusega. Tegelik toote värv võib pisut erineda pildil olevast. <p>Tootepildid on illustreeriva tähendusega. Tegelik toote värv võib pisut erineda pildil olevast.</p>
GTIN: 5900495720757NUTISEADME TARVIKUD>KAANED JA ÜMBRISED>KARASTATUD KLAAS
Sobib mudelile HUAWEI P20 PRO. Tootepildid on illustreeriva tähendusega. Tegelik toote värv võib pisut erineda pildil olevast. <p>Tootepildid on illustreeriva tähendusega. Tegelik toote värv võib pisut erineda pildil olevast.</p>
GTIN: 5900495702111NUTISEADME TARVIKUD>KAANED JA ÜMBRISED>KARASTATUD KLAAS
Sobib mudelile HUAWEI P20 PRO. Tootepildid on illustreeriva tähendusega. Tegelik toote värv võib pisut erineda pildil olevast. <p>Tootepildid on illustreeriva tähendusega. Tegelik toote värv võib pisut erineda pildil olevast.</p>
STICK LITE M is ideal for those who value good, compact design combined with uncomplicated functionality. Regardless, if it is for everyday use or a tough job, the portable hand lamp delivers as promised: optimal brightness and handy design at a fair price.<br>It has a stepless dimmer function in the range of 10 % to 100 % that enables you to easily adjust the light output to the work task.<br>The practical built-in magnet allows you to benefit from the bright light of the handlamp and still having both hands free for work.<br><br>Light source: COB LED<br>LED performance, lumen/W: 130<br>Luminous flux, lumen: 40-400 / Spot: 75<br>Illuminance, lux@0.5 m: 50-500 / Spot: 380<br>Adjustable light output: Stepless<br>Beam angle: 110° / 35°<br>CRI: Ra > 80<br>CCT: 6000 K<br>Operating time with max. lumen, h: 2<br>Operating time with min lumen, h: 20<br>Charging time, h: 3<br>Battery: 3.7V / 1800 mAh Li-ion <br>Protection class: IP20/IK07<br>Impact resistance: 1m
STICK LITE S is ideal for those who value good, compact design combined with uncomplicated functionality. Regardless, if it is for everyday use or a tough job, the portable hand lamp delivers as promised: optimal brightness and handy design at a fair price.<br>It has a stepless dimmer function in the range of 10 % to 100 % that enables you to easily adjust the light output to the work task.<br>The practical built-in magnet allows you to benefit from the bright light of the handlamp and still having both hands free for work.<br><br>Light source: COB LED<br>LED performance, lumen/W: 165<br>Luminous flux, lumen: 20-200 / Spot: 50<br>Illuminance, lux@0.5 m: 28-280 / Spot: 380<br>Adjustable light output: Stepless<br>Beam angle: 110° / 35°<br>CRI: Ra > 80<br>CCT: 6000 K<br>Operating time with max. lumen, h: 2<br>Operating time with min lumen, h: 20<br>Charging time, h: 2.5<br>Battery: 3.7V / 1200 mAh Li-ion <br>Protection class: IP20/IK07<br>Impact resistance: 1m
Keskmise suurusega WORK LITE M käsilamp on hea kvaliteediga töövalgusti väga konkurentsivõimelise hinnaga.<br>WORK LITE M on mõeldud professionaalsele kasutajale, kes vajab funktsionaalset, praktilist ja kasutajasõbralikku käeshoitavat LED valgustit. SMART CLIP 4-in-1 klambri-süsteemi on integreeritud magnet, riputuskonks, vööklamber ja jalg.<br><br>Valgusallikas: COB LED / Kohtvalgusti: High Power LED<br>LED jõudlus, lumen/W: 165<br>Valgusvoog, lumen: 35-350 / Kohtvalgusti: 75<br>Valgustus, lux@0.5 m: 40-400 / Kohtvalgusti: 600<br>Valgustugevuse reguleerimine: sujuv<br>Valgustusnurk: 120° / Kohtvalgusti: 40°<br>CRI (värvispektri ühtluse indeks): Ra > 80<br>CCT (värvustemperatuur): 6000 K<br>Tööaeg maksimum võimsusel, h: 2<br>Tööaeg minimaalsel võimsusel, h: 20<br>Laadimisaeg, h: 3.5<br>Aku: 3.7V / 2000 mAh Li-ion <br>Kaitseklass: IP20/IK07<br>Löögikindlus: 1m
Käsivalgusti Scangrip WORK LITE S, 250lm, laetav, IP20
Tootekood: 03.5667Kandelambid
Kompaktne WORK LITE S käsilamp on hea kvaliteediga töövalgusti väga konkurentsivõimelise hinnaga.<br>WORK LITE S on mõeldud professionaalsele kasutajale, kes vajab funktsionaalset, praktilist ja kasutajasõbralikku käeshoitavat LED valgustit. SMART CLIP 4-in-1 klambri-süsteemi on integreeritud magnet, riputuskonks, vööklamber ja jalg.<br><br>Valgusallikas: COB LED<br>LED jõudlus, lumen/W: 165<br>Valgusvoog, lumen: 25-250<br>Valgustus, lux@0.5 m: 30-300<br>Valgustugevuse reguleerimine: sujuv<br>Valgustusnurk: 120°<br>CRI (värvispektri ühtluse indeks): Ra > 80<br>CCT (värvustemperatuur): 6000 K<br>Tööaeg maksimum võimsusel, h: 2<br>Tööaeg minimaalsel võimsusel, h: 20<br>Laadimisaeg, h: 3<br>Aku: 3.7V / 1500 mAh Li-ion <br>Kaitseklass: IP20/IK07<br>Löögikindlus: 1m
InvisibleCase - Nähtamatu kaitse sinu telefonile!InvisibleCase on loodud 3MK poolt selleks, et kaitsta telefoni kriimude ja mustuse eest. Tagakülje kaitsekile on üliõhuke
Kingston IronKey Keypad 200 Encrypted USB Flash Drive Memory with 256-bit XTS-AES hardware encryption that meets FIPS 140-3 Level 3 requirements (certification pending). The Kingston IronKey Keypad 200 is an OS-agnostic, hardware-encrypted USB drive with an alphanumeric keypad for easy PIN access. The KP200 memory is equipped with XTS-AES encryption with a 256-bit key. It is also FIPS 140-3 Level 3 certified (pending), confirming military-grade security with additional solutions that increase data security. The memory circuits are covered with a layer of special epoxy resin, which makes it virtually impossible to remove the components without damaging them, thus protecting against attacks on semiconductor systems. The memory is designed to highlight any attempt at physical interference. It is also protected against Brute Force and BadUSB password attacks thanks to digitally signed firmware. The alphanumeric keyboard is covered with a polymer layer that protects the keys and prevents the sequence of pressing them from being guessed through fingerprint analysis. The KP200 comes with a built-in rechargeable battery that allows it to be unlocked for the first time without using software and then connected to any device that supports USB A mass storage devices. This gives the user maximum freedom to use the memory on multiple platforms with different operating systems. With the Multi-PIN option (Admin and User PINs), the memory allows you to set easy-to-remember, but hard-to-guess alphanumeric Admin and User PINs. The administrator can restore the user's PIN and provide access to the storage if the user forgets the PIN or the storage locks after the user reaches the maximum number of 10 login attempts. When administrator and user PINs are enabled, the KP200 locks the user PIN after 10 consecutive failed login attempts. If the administrator PIN is entered incorrectly 10 times, Brute Force Protection cryptographically wipes the memory, permanently deletes data and resets the device. The memory also offers two levels of read-only mode (write protection): a general mode that can be set by the administrator, and a session mode that can be set by the user. Read-only modes protect memory from malware on untrusted systems. Additionally, an administrator can upload content and set the overall read-only mode, which allows the user to access the data but not make changes. FIPS 140-3 Level 3 Certification (pending) KP200 memory now meets the new military-grade security specification, FIPS 140-3 Level 3, published by NIST. This is an extended version of the FIPS 140-2 specification, which further increases memory security and its resistance to physical tampering. The drive is equipped with 256-bit XTS-AES encryption and protected against Brute Force and BadUSB attacks with digitally signed firmware. The memory circuits are covered with a layer of special epoxy resin, which makes it virtually impossible to remove the components without damaging them, thus protecting against attacks on semiconductor systems. Independence from the operating system and device The KP200 is equipped with a rechargeable battery that allows it to be unlocked for the first time without using software and then connected to any device that supports USB A storage devices. This gives the user maximum flexibility in using the memory on multiple platforms with different operating systems. Multi-PIN option Users can select user or administrator/user mode. Administrator Mode allows you to restore the user's PIN and provide access to the storage if the user forgets the PIN or the storage locks after the user reaches the maximum number of 10 login attempts. General and session read-only mode options Both administrator and user can set the session to read-only mode to protect storage from malware on untrusted systems. The administrator can also set the general read-only mode, which will remain active until the memory is reset.
Kingston IronKey Keypad 200 is an OS-independent hardware-encrypted USB drive with an alphanumeric keypad for easy-to-use PIN access.KP200 incorporates XTS-AES 256-bit hardware-based encryption. It is also FIPS 140-3 level 3 (pending) certified for military-grade security with enhancements that further elevate the bar for data protection. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components. The drive is designed to be tamper evident to alert owners. It also incorporates brute force password attack protection, and BadUSB protection with digitally signed firmware. The alphanumeric keypad is coated with a layer of polymer that protects the keys and hides key usage through analysis of fingerprints on the keys.KP200 utilizes a built-in rechargeable battery that can be used to unlock the drive first without using any software, and then plug it into any device that supports a USB type A mass storage device. This gives users the most flexibility across different platform types and operating systems.The drive also provides two levels of read-only (or write-protect) modes - a global mode that can be set by Admin, and a session-only mode that can be set by User. Read-only modes can protect the drive from malware on untrusted systems. In addition, Admin can load content and set global read-only mode, so that User can access the data but not make any changes.
Kingston IronKey Keypad 200 FIPS 140-3 Level 3 compliant XTS-AES 256-bit hardware encryption memory (certification pending) The Kingston IronKey Keypad 200 is an OS-agnostic, hardware-encrypted USB Type-A and USB Type-C1 drive with an alphanumeric keypad for easy PIN access. The KP200 memory is equipped with XTS-AES encryption with a 256-bit key. It is also FIPS 140-3 Level 3 certified (pending), confirming military-grade security with additional solutions that increase data security. The memory circuits are covered with a layer of special epoxy resin, which makes it virtually impossible to remove the components without damaging them, thus protecting against attacks on semiconductor systems. The memory is designed to highlight any attempt at physical interference. It is also protected against Brute Force and BadUSB password attacks thanks to digitally signed firmware. The alphanumeric keyboard is covered with a polymer layer that protects the keys and prevents the sequence of pressing them from being guessed through fingerprint analysis. The KP200 comes with a built-in battery that allows you to unlock it for the first time without using software and then connect it to any device that supports USB Type-A or USB Type-C storage devices. This provides the user with maximum flexibility in memory usage across multiple platforms with different operating systems. With the Multi-PIN feature (Admin and User PINs), the memory allows you to set easy-to-remember, but hard-to-guess alphanumeric PINs for your admin and user accounts. The administrator can restore the user's PIN and provide access to the storage if the user forgets the PIN or the storage locks after the user reaches the maximum number of 10 login attempts. When administrator and user PINs are enabled, the KP200 locks the user PIN after 10 consecutive failed login attempts. If the administrator PIN is entered incorrectly 10 times, Brute Force Protection cryptographically wipes the memory, permanently deletes data and resets the device. The memory also offers two levels of read-only mode (write protection): a general mode that can be set by the administrator, and a session mode that can be set by the user. Read-only modes protect memory from malware on untrusted systems. Additionally, an administrator can upload content and set the overall read-only mode, which allows the user to access the data but not make changes.
