Kõik hinnakirjad

<p> </p> <p>     <strong>Screen display spec：</strong></p> <table width="100%"> <tbody> <tr> <td> <p>Dimension：24.6mm(W) * 131.7mm(H) * 205.3mm(L)</p> </td> </tr> <tr> <td> <p>Display size：8〞 Color TFT-LCD                               Colors：16.7M                                       Resolution：1280*800</p> </td> </tr> <tr> <td> <p>Response Time：30ms(Typ.)                                    Brightness：300cd/m2(Typ.)                   Contrast Ratio：1000（Typ.）</p> </td> </tr> <tr> <td> <p>I/O：MINI-HDMI*1(Video Signal)   TYPE-C*1             Refresh Rate(max.)：60Hz                      Working Temperture：0-50℃</p> </td> </tr> </tbody> </table> <p> </p> <p>    <strong> </strong><strong>Product Specification：</strong></p> <table width="100%"> <tbody> <tr> <td> <p>Model：D31 MESH SCREEN Black</p> </td> </tr> <tr> <td> <p>Dimension: 205mm (W) * 347.5mm(H) *440mm(D) (Vol: 31.3L)       </p> <p>                *Depth does not include the PCI brackets outside the chassis, height does not include case stand         </p> <p>                 205mm (W) * 363mm(H) * 452mm(D) (overall size)</p> </td> </tr> <tr> <td> <p>Material：0.6mm+0.7mm steel panel</p> </td> </tr> <tr> <td> <p>Drive Bay：2.5〞SSD*2+3.5〞HDD*1</p> </td> </tr> <tr> <td> <p>Motherboard：ITX / DTX / M-ATX</p> </td> </tr> <tr> <td> <p>PCI expansion slots：4</p> </td> </tr> <tr> <td> <p>Front I/O：USB3.2 Gen 2 Type-C*1 / USB3.0*1/Audio & Mic*1</p> </td> </tr> <tr> <td> <p>Power supply support：ATX</p> </td> </tr> <tr> <td> <p>CPU cooler support：168mm</p> </td> </tr> <tr> <td> <p>Graphics card support：330-400mm</p> </td> </tr> <tr> <td> <p>Fan mounting position：Top 120mm*3 or 140mm*2          Rear 120*1mm           Bottom 120mm*3 or 140mm*2           Front 120mm*1</p> </td> </tr> <tr> <td> <p>Radiator support： Top 240/280/360*1                            Rear 120*1                 Bottom 240/360*1</p> </td> </tr> </tbody> </table> <table width="100%"> <tbody> <tr> <td> <p>Weight: Net 6.4KG</p> </td> </tr> </tbody> </table>

Spectacular designer case from Jonsbo for design-oriented gamers and eye-catching show systems. The futuristic design with large tempered glass side panels showcases your hardware perfectly. The spacious big tower offers an open chassis design with excellent airflow and plenty of interior space. The features of the Jonsbo MOD3 at a glance: Showcase case from Jonsbo in white Big tower with a futuristic look Open-frame design for massive airflow Side panels made of tempered glass Supports motherboards up to E-ATX form factor Space for up to 6x 120 mm fans and 1x 360 mm radiator MOD3: The futuristic showcase case from Jonsbo The angular MOD3 is the highlight of any setup with its extraordinary and futuristic design. Thanks to its large tempered glass side panels, high-performance gaming hardware can be showcased to perfection inside. The aluminum case can accommodate a motherboard up to E-ATX form factor. It supports graphics cards up to 400 mm in length and CPU coolers up to 170 mm in height. The angular showcase also offers sufficient storage options with support for one 3.5-inch drive or up to three 2.5-inch drives. Thanks to the airy open-frame design with large cut-outs, optimal airflow is ensured. The Jonsbo MOD3 can accommodate up to six 120 mm fans in total. For water-cooled systems, a 360 mm radiator can be installed in the top of the case. The I/O panel features two USB 3.0 ports as well as two 3.5 mm audio jacks.

Elegant and compact Mini-ITX aluminum case from Jonsbo Supports graphics cards up to a maximum length of 197 mm Powered by SFX power supply CPU coolers up to 65 mm in height One 120 mm fan pre-installed at the front Drive cage for up to 5x 3.5" HDDs Comes with a board for 5x SATA slots, hot-swap capable I/O panel: 1x USB-C 3.1, 1x USB 3.0 Type-A, 1x 3.5 mm audio jack (audio + mic) The Jonsbo N2 Mini-ITX Case in detail A compact computer for cloud storage or home office systems. The Jonsbo N2 is the small but refined solution for dedicated systems. It accommodates one 2.5-inch SSD and five 3.5-inch HDDs. For the five HDDs, a hot-swap capable SATA/SAS backplane is already installed. It is adaptable and space-saving, as it can be positioned horizontally or vertically. Organization and Hardware The Jonsbo N2 is a Mini-ITX case and is only compatible with motherboards of this form factor. Only small 1-slot graphics cards with a length of up to 197 mm will fit. The case can be fully disassembled to facilitate installation. For quick access to optional hot-swap HDDs, the left side panel can be quickly removed. Important! There is not much space inside. Graphics cards only fit with a low-profile bracket. It is recommended to use a CPU chipset with integrated graphics. The mini-system's power is supplied by a compact SFX power supply. The CPU cooler, however, can be a maximum of 65 mm high. For airflow, there is a 120 mm fan installed in the front, which is of course included. Compact design for home use If you're looking for a small computer for basic tasks like office programs or want to back up your own cloud storage locally, the Jonsbo N2 is a practical solution. The design is space-saving, clever, and offers capacity for five 3.5-inch HDDs in a drive cage. A 2.5-inch drive can be mounted above the power supply. Functionality is a priority with the Jonsbo N2. Its compact dimensions of 222.5 mm x 222.5 mm x 224 mm (W x H x D) fit into any home and its high-quality aluminum case blends quietly into any setup or style. If you still can't find a good spot to lay it down, just stand it up. No matter how you position it, the I/O panel with a USB-C 3.1, USB 3.0 Type-A, and 3.5 mm audio jack will always remain easily accessible in any position.

The JONSBO T7 Black is a stylish case for compact gaming and office systems. It is aimed at users seeking a portable setup with high-quality materials and efficient use of space. Striking design with real wood handle and aluminium structure Compact build with full Micro-ATX compatibility Supports GPUs up to 280mm and CPU coolers up to 165mm Thoughtful dual-chamber layout for clean airflow Modern front ports including USB-C for maximum connectivity Design & Materials The case combines 3 mm thick aluminium with fine wood accents, offering a successful blend of technology and design. The integrated handle makes transport easier and emphasises the case’s mobile focus. Space & Hardware Support The T7 supports graphics cards up to 280mm in length and CPU coolers up to 165mm in height. Power supplies up to 220mm deep also fit inside. Two 2.5-inch SSDs and an additional 3.5- or 2.5-inch drive can be integrated. Efficient Cooling & Connectivity Up to three 120mm fans provide effective cooling, while the dual-chamber layout separates heat sources. The I/O panel offers USB 3.0 and audio as well as a modern USB-C port for fast data connections.

The JONSBO T7 Black is a stylish case designed for compact gaming and office systems. It targets users who desire a portable setup with a premium material feel and efficient space utilization. Striking design with real wood handle and aluminum structure Compact build with full Micro-ATX compatibility Supports GPUs up to 280mm and CPU coolers up to 165mm Thoughtful dual-chamber layout for clean airflow Modern front ports including USB-C for maximum connectivity Design & Materials The case combines 3 mm thick aluminum with refined wood accents, creating a seamless blend of technology and design. The integrated handle makes transportation easy and highlights the case’s mobility. Space & Hardware Support The T7 accommodates graphics cards up to 280mm in length and CPU coolers up to 165mm in height. Power supplies up to 220mm in depth also fit comfortably. Two 2.5-inch SSDs and an additional 3.5- or 2.5-inch drive can be installed. Efficient Cooling & Connectivity Up to three 120mm fans deliver effective cooling, while the dual-chamber layout separates heat sources. The I/O panel features USB 3.0 and audio ports, along with a modern USB-C port for fast data transfer.

Spectacular designer case from Jonsbo for design-oriented gamers and eye-catching show systems. The triangular design with large tempered glass side panels showcases hardware to perfection. The large midi-tower offers space for up to ten 120-mm fans and a 360mm radiator. Features of the Jonsbo TR03-A at a glance: Stylish showcase case made of aluminum Front made of aluminum Two large side panels made of tempered glass Supports motherboards up to ATX form factor Graphics cards can be mounted horizontally or vertically Bracket protects cards from bending Modular HDD cage for storage drives and additional fans Space for up to 10x 120-mm fans and 1x 360mm radiator TR03-A: Stylish showcase case from Jonsbo The triangular-shaped TR03-A with its exceptional and futuristic design is the eye-catcher in any setup. Thanks to the two large tempered glass side panels, powerful gaming hardware is perfectly showcased inside. The aluminum case accommodates a motherboard up to the ATX form factor. Graphics cards up to a length of 460 millimeters can be installed both horizontally and vertically. The practical bracket effectively prevents large and heavy graphics cards from sagging. The CPU cooler may be up to 175 millimeters high. The showcase can also accommodate up to five 3.5- or 2.5-inch drives. There are mounting positions for this on the motherboard tray and in the modular drive cage. Overall, the Jonsbo TR03-A can house up to ten 120-mm fans. Thanks to numerous mounting options for fans and cleverly placed air inlets, optimal airflow is assured. Filters in the base and front keep the system dust-free. For water-cooled systems, a 360-mm radiator can be installed in the front of the case. The I/O panel offers a USB 3.0 Type-C port, two USB 3.0 ports, two 3.5-mm audio jacks, and a power button.

Noble midi-tower made of aluminum and steel in black Large side panel made of tempered glass For motherboards up to E-ATX (max. 305 x 285 mm) and large ATX power supplies Space for a radiator up to 360 mm in the top Eight PCI slots for graphics cards up to 330 mm in length Space for up to 2x 2.5" and 4x 2.5"/2x 3.5" drives The Jonsbo UMX6S for high-end gaming PCs: This elegant midi-tower made of aluminum and steel is suitable for motherboards up to the E-ATX form factor (max. 305 x 285 mm). The Jonsbo UMX6S features an elegant design with rounded edges and a body made from brushed aluminum. Inside, the case can house a powerful gaming system, and the large tempered glass side panel allows a view of the installed hardware. Design and hardware compatibility Externally, the Jonsbo UMX6S impresses with its understated and elegant design as well as flawless workmanship. The entire case is made of brushed aluminum and steel, and the large tempered glass side panel allows a view of the installed hardware inside. The sophisticated designer case can accommodate a high-performance gaming system. In addition to a motherboard up to the E-ATX form factor (max. 305 x 285 mm), graphics and expansion cards up to 330 millimeters in length can be installed in the eight PCI slots. Even large ATX power supplies up to 200 mm long can be installed in the case. Cooling and drive bays For cooling, three 120 mm or two 140 mm fans can be installed in the top. There is space for two additional 120 mm fans in the bottom, and a 120 mm fan can also be mounted in the rear panel. Large CPU air coolers with a height of up to 169 mm can be installed. Prefer water cooling? A radiator up to 360 mm can be installed at the top, and a 120 mm radiator in the rear panel. A removable dust filter protects the interior from dust and dirt. The UMX6S can accommodate a total of four 2.5" drives or two 3.5" hard drives and two 2.5" drives. There are corresponding mounting options available on the mainboard tray of the case. The I/O panel is located at the front and includes a power switch, two audio jacks, one USB Type-C port, two USB 2.0 ports, and two USB 3.0 ports.

<div> See Delocki ühe pesaga kaardilugeja loeb ja kirjutab SD- ja MMC-mälukaarte. Seda saab ühendada arvuti, tahvelarvuti või nutitelefoni USB Type-C™-porti. Toetatud SD UHS-II mälukaardid võimaldavad kiiret andmeedastust.</div> <div> </div> <div> </div> <div> Spetsifikatsioon</div> <div> - Ühendused:</div> <div> 1 x SuperSpeed USB (USB 3.1 Gen 1) USB Type-C™ isas ></div> <div> 1 x SD-pesa</div> <div> - Kiibistik: Realtek RTS5329</div> <div> - Toetab mälu:</div> <div> kuni 2 TB</div> <div> SD 3.0 (UHS-I), SD 4.0 (UHS-II)</div> <div> - Andmeedastuskiirus:</div> <div> USB 3.1 Gen 1 kuni 5 Gbit/s</div> <div> SD lugemine kuni 250 MB/s, kirjutamine kuni 185 MB/s</div> <div> - Mõõtmed (LxSxK): ca. 40,2 x 34,4 x 9,6 mm</div> <div> - Hot Swap, Plug & Play</div> <div> </div> <div> - Toetab järgmisi mälukaarte:</div> <div> Secure Digital (SD), SDHC UHS-I, SDHC UHS-II, SDXC UHS-I, SDXC UHS-II, Mini SD*,</div> <div> Mini SDHC*, Mini SDXC*, Micro-SD*, Micro SDHC*, Micro SDXC*, T-Flash*,</div> <div> MultiMediaCard, MMCplus, MMCmobile*, RS-MMC*, MMCmicro*.</div> <div> *Vajalik on adapter</div> <div> </div> <div> </div> <div> Süsteeminõuded</div> <div> - Windows 7/7-64/8.1/8.1-64/10/10-64, Linux ex Kernel 2.6.x / Kernel 4.x.x,</div> <div> Mac ex OS 10.12.5, Android ex 7.1.2</div> <div> - Vaba USB Type-C™ pordiga või vaba Thunderbolt™ 3 pordiga seade</div> <div> </div> <div> </div> <div> Paketi sisu</div> <div> - USB Type-C™ kaardilugeja</div> <div> - Kasutusjuhend</div>

Kiirlaadija Jellico AK-165 USB 22.5W QC 3.0 1x USB (5-12V) + USB Lightning Kaabel 1m Valge

Innovatively designed mid-tower with elevated tempered glass panels for excellent airflow Supports motherboards up to ATX with 7 PCI slots at the rear Accommodates a GPU up to 310 mm long and a CPU cooler up to 165 mm high Four Umbra aRGB 120 mm fans are integrated into the case Umbra Core Controller included for lighting control Perfect for showcase builds and RGB enthusiasts Prepped for custom water cooling loops with support for two radiators Unique Style If you like uniquely designed PC cases, then this new addition to the Big Chungus line is just right for you. The Big Chungus Shredded features a bold and innovative design that maximizes both airflow and aesthetics. The Big Chungus series is known for its distinct and groundbreaking style, and the Shredded continues this tradition. By implementing stylish, transformer-like panels with the iconic Big Chungus industrial, diagonal edges, a case has been created that combines form and function. The tempered glass side panels are elevated from the rest of the case to enable exceptional airflow and showcase your high-end hardware. The built-in Umbra aRGB fans make the Big Chungus Shredded a real showstopper. With twelve LEDs forming the outer ring and nine more for the inner ring, these fans allow you to create stunning lighting effects. They can be controlled via the 3-pin aRGB headers on your motherboard or alternatively through the included Umbra Core Controller. With this case, your gaming PC is sure to catch every eye. Extensive Cooling The Umbra fans bring not only vibrant color effects to the Big Chungus Shredded but also contribute to its efficient cooling potential. Each fan can rotate up to 1500 RPM, boosting the phenomenal airflow created by the elevated glass panels and hexagonal mesh cutouts. Since they are PWM fans, their speed can be adjusted to match the current workload. Should you need even more cooling, an additional 120 mm fan can be mounted at the rear of the case. To further enhance thermal performance, this case is designed for custom water cooling loops and supports the installation of two radiators: a 360 mm radiator at the front and a second 240 mm radiator at the top. Thanks to its innovative and unconventional design, the case is not only ideal for custom loops, but they will also be on full display. For High-End Hardware As a gigantic mid-tower, the Kolink Big Chungus Shredded offers ample support for high-end gaming hardware. At its core, it can house an ATX motherboard and provides seven PCI slots for expansion cards. The graphics card can be up to 310 mm long, while CPU coolers of up to 165 mm can be accommodated—covering a wide range of current models. Under the ventilated PSU shroud, there is space for an ATX power supply up to 200 mm in length. This gives you plenty of flexibility when choosing a unit to support your high-end system. Furthermore, the drive bay offers comprehensive support for fast and flexible storage solutions, allowing you to install one 3.5-inch HDD and two 2.5-inch SSDs. Superior Stability With such a unique shape, the Big Chungus Shredded requires an extremely robust frame. It is made from 1.2 mm thick SPCC steel to ensure enhanced stability. The elegant front panel is also crafted from metal, improving passive heat dissipation. The I/O panel is located on the front top edge and offers a wide range of ports for your peripherals: one USB 2.0 port, one USB 3.0 port, and HD audio jacks for microphones and headphones. There is also an LED control button for fast and easy access to the lighting.

The Kolink Citadel Mesh Micro-ATX case is suitable for those who want a compact gaming case with extensive airflow. With its large mesh front and the two pre-installed 120 mm PWM fans behind it, the Micro-ATX case skillfully combines an attractive design with impressive performance. The tempered glass side door allows hardware components to be put fully on display - the perfect case for perfect gaming setups. The features of the Kolink Citadel Mesh at a glance: Large mesh front with two pre-installed 120 mm PWM fans in black Tempered glass side door for an unobstructed view of the interior Suitable for Micro-ATX and Mini-ITX motherboards Vertical installation of a 2.5-slot graphics card possible (riser card sold separately) Installation of a 280 mm radiator at the front and a 240 mm radiator on the top possible I/O panel with two USB 3.0 ports, one USB 2.0 port, and HD audio Space for graphics cards up to 345 mm, CPU coolers up to 190 mm, and power supplies up to 200 mm Kolink Citadel Mesh: Optimized airflow meets strong performance The Kolink Citadel Mesh comes with two 120 mm PWM fans mounted at the front. The fans offer good performance, are quiet at the same time, and can be connected to 4-pin fan headers on the motherboard. The motherboard then automatically controls the speed via PWM. The front consists of a large mesh panel and makes a decisive contribution to the good airflow inside the case. The two pre-installed 120 mm fans can be replaced with two larger 140 mm fans. In addition, two 140 or 120 mm fans can be mounted on the top and another 120 mm fan at the rear. Those who prefer water cooling can mount a radiator up to 280 mm at the front, and a 240 mm radiator can also be installed on the top. On the top there is a magnetic dust filter over the honeycomb-pattern mesh. The installed hardware can be admired through the easy-to-open tempered glass side door. Magnets keep the door closed. The perfect case for enthusiasts The interior is completely finished in black, and the PSU shroud contributes to a tidy look. In the drive cage under the PSU shroud, there is space for two 3.5-inch or two 2.5-inch drives. Two additional 2.5-inch drives can be mounted on the motherboard tray next to the motherboard. The motherboard tray and the PSU shroud offer numerous openings for cables, and behind the motherboard tray there is a generous 24 millimeters of space for cable management. The optional ATX power supply, up to 200 millimeters long, is installed above a removable dust filter. Graphics cards up to 345 millimeters in length fit in the Micro-ATX case; with a radiator installed at the front, the permitted length is reduced to 320 millimeters. CPU coolers may be up to 190 millimeters tall. The I/O panel at the front of the top panel includes two USB 3.0 Type-A ports, one USB 2.0 port, and audio connectors.

The Kolink Citadel Mesh RGB Micro-ATX case is designed for those who want a compact gaming case with excellent airflow. Featuring a large mesh front panel and two pre-installed 120mm PWM fans with digitally addressable RGB LEDs behind it, this Micro-ATX case skillfully combines attractive design with powerful performance. The tempered glass side door allows hardware components to be showcased—making it the perfect case for top-tier gaming setups. Key features of the Kolink Citadel Mesh RGB at a glance: Large mesh front panel for optimal airflow Includes a total of three pre-installed 120mm PWM fans with ARGB LEDs Controller and lighting controls included on the I/O panel Tempered glass side door for an unobstructed view of the interior Compatible with Micro-ATX and Mini-ITX motherboards Supports vertical installation of a 2.5-slot graphics card (riser card sold separately) Supports installation of a 280mm radiator at the front and a 240mm radiator on the top I/O panel with two USB 3.0 ports, one USB 2.0 port, and HD audio Space for graphics cards up to 345mm, CPU coolers up to 190mm, and power supplies up to 200mm Kolink Citadel Mesh RGB: Optimized airflow meets high performance The Kolink Citadel Mesh RGB comes with three 120mm PWM fans pre-installed at the front and rear. These fans deliver strong performance while remaining quiet and can be connected to 4-pin fan headers on the motherboard. The motherboard then takes over automatic speed control via PWM. The large mesh front panel plays a crucial role in providing excellent airflow inside the case. All the fans are equipped with digitally addressable RGB LEDs, which can be controlled via the included controller with a button on the I/O panel or directly through a motherboard equipped with 3-pin (5VDG) headers. The two pre-installed 120mm fans at the front can be replaced with larger 140mm fans. Additionally, two 140mm or 120mm fans can be installed at the top, and another 120mm fan can be mounted at the rear. For water-cooling enthusiasts, a radiator up to 280mm can be attached at the front, and a 240mm radiator can be installed on the top. A magnetic dust filter with a honeycomb mesh pattern is located on the top. The easily opened tempered glass side door allows you to admire the installed hardware, held securely closed with magnets. The perfect case for enthusiasts The interior is completely black, and the PSU shroud contributes to a tidy look. The drive cage under the PSU shroud provides space for two 3.5-inch or two 2.5-inch drives. Two more 2.5-inch drives can be mounted next to the motherboard on the motherboard tray. Both the motherboard tray and the PSU shroud feature numerous openings for cables, and there's ample space—24mm—behind the motherboard tray for cable management. The optional ATX power supply, up to 200mm long, sits above a removable dust filter. Graphics cards up to 345mm long fit into the Micro-ATX case, though this is reduced to 320mm with a front-mounted radiator. CPU coolers can be up to 190mm high. The front I/O panel on the top includes two USB 3.0 Type-A ports, one USB 2.0 port, and audio jacks.

The Kolink Citadel Mesh Micro-ATX case is perfect for those who want a compact gaming case with extensive airflow. Featuring a large mesh front panel and two pre-installed 120mm PWM fans with digitally addressable RGB LEDs behind it, this Micro-ATX case skillfully combines an attractive design with outstanding performance capabilities. The tempered glass side door allows you to showcase your hardware components – the perfect case for top-tier gaming setups. Features of the Kolink Citadel Mesh at a glance: Large mesh front for optimal airflow Comes with a total of three pre-installed 120mm PWM fans with ARGB LEDs Includes a controller and lighting control via the I/O panel Tempered glass side door for an unobstructed view of the interior Compatible with Micro-ATX and Mini-ITX motherboards Vertical installation of a 2.5-slot graphics card possible (riser card sold separately) Supports a 280mm radiator at the front and a 240mm radiator at the top I/O panel with two USB 3.0 and one USB 2.0 port plus HD audio Room for graphics cards up to 345mm, CPU coolers up to 190mm, and power supplies up to 200mm Kolink Citadel Mesh: Optimized airflow meets performance The Kolink Citadel Mesh is delivered with three 120mm PWM fans pre-installed at the front and rear. These fans provide excellent performance, run quietly, and can be connected to 4-pin fan headers on the motherboard. The motherboard then takes over automatic speed control via PWM. The front features a large mesh panel that contributes significantly to the excellent airflow inside the case. All fans are equipped with digitally addressable RGB LEDs, which can be controlled either via the included controller with a button on the I/O panel or directly via a motherboard equipped with 3-pin (5VDG) headers. The two pre-installed 120mm fans at the front can be replaced with two larger 140mm fans. Additionally, two 140mm or 120mm fans can be installed on the top, and another 120mm fan can be mounted at the rear. For water cooling enthusiasts, a radiator up to 280mm can be installed at the front, with a 240mm radiator fitting at the top. On the top, there’s a magnetic dust filter above the mesh with a honeycomb pattern. The easy-to-open tempered glass side door allows you to admire the installed hardware, held closed by magnets. The perfect case for enthusiasts The interior is completely black, and the power supply shroud ensures a tidy appearance. The drive cage beneath the PSU shroud offers space for two 3.5-inch or two 2.5-inch drives. Two additional 2.5-inch drives can be mounted on the motherboard tray next to the motherboard. Both the motherboard tray and power supply shroud provide numerous openings for cables, with 24 millimeters of space behind the tray for cable management. The optional ATX power supply of up to 200mm in length fits above a removable dust filter. Graphics cards up to 345mm in length fit inside the Micro-ATX case; with a front-mounted radiator, the maximum length is reduced to 320mm. CPU coolers can be up to 190mm high. On the I/O panel at the top front there are two Type-A USB 3.0 ports, one USB 2.0 port, and audio connections.

Off to new horizons - with Kolink! The stylish Horizon Midi-Tower offers abundant features at a low price, such as four RGB fans with remote control and tinted tempered glass at the front as well as the large side panel. It also impresses with its elegant design and versatile mounting options for water cooling, storage devices, and cable management. Up to five 2.5-inch drives and a 360-mm radiator can be installed in this chic case. The features of the Kolink Horizon Midi-Tower at a glance: Stylish midi-tower for ATX motherboards and smaller 4x 120-mm fans with addressable RGB lighting Includes RGB controller & remote control Front and side panels made of tinted tempered glass Space for 120 mm and 360 mm radiators I/O panel with 2x USB 3.0, 1x USB 2.0 & HD audio 3x 2.5-inch and 2x 3.5/2.5-inch slots Hardware and cooling options in the Kolink Horizon Midi-Tower: The Kolink Horizon Midi-Tower offers plenty of space for powerful gaming hardware. The motherboard tray, equipped with a practical cut-out for easy cooler changes, can accommodate mini-ITX, micro-ATX, and ATX motherboards. In addition, the stylish case can house graphics cards up to 345 mm long and CPU coolers up to 155 mm high, and it features tool-free, removable dust filters on the top and bottom for dust protection. For effective hardware cooling, up to six 120-mm fans can be installed. Four models with addressable RGB lighting are already installed at the front and rear, while two more can fit in the top. Radiators can also be used to cool hardware, with up to a 360-mm model in the front and up to a 120-mm model in the rear. Tempered glass and addressable RGB lighting: To provide a clear view of the installed hardware, the Horizon chassis features a large, tool-free, removable side panel made of tinted tempered glass as well as another one on the front. Side ventilation slots still ensure good airflow. The four pre-installed 120-mm fans are equipped with double-sided dispersion rings for the digitally addressable RGB LEDs. This allows them to shine both outwards and into the interior of the case. They are connected to an RGB controller hub. With the included remote control, nine different RGB lighting effects can be set. Alternatively, the case also has a button for this on the front panel. Additionally, the front panel offers a range of connectors including two USB 3.0 ports, one USB 2.0 port, and the obligatory audio jacks. A total of three 2.5-inch drives can be mounted on the motherboard tray and PSU shroud. Under the power supply shroud are two tool-free drive bays that can accommodate two 3.5-inch drives.

Strikingly designed front panel with RGB lighting Tempered glass side panel 1x pre-installed 120-millimeter ARGB fan at the rear Space for 2x 120 or 140-millimeter fans at the front Room for graphics cards up to 300 mm long and CPU coolers up to 160 mm I/O panel with one USB 3.0, two USB 2.0 ports, and RGB LED control Exceptionally lightweight and portable at just 4.3 kilograms The Inspire K2 Plus Midi-Tower Affordable Micro-ATX case from Kolink for gamers The Kolink Inspire K2 Plus is a very affordable Micro-ATX case perfect for style-conscious gamers. It can accommodate graphics cards up to 30 cm in length. The front is especially eye-catching with its pyramid-like bulge and cut-outs reminiscent of circuit board traces, through which air enters the case. The front is accented by a semi-transparent strip behind which a digitally addressable RGB LED strip is installed. At the top of the front cover is the I/O panel with USB 2.0 and USB 3.0 ports, as well as the RGB lighting control. A tinted tempered glass side panel completes the stylish design of the Inspire K2. The Inspire K2 Plus Midi-Tower Plenty of space for hardware and cooling Inside, there is space for a Micro-ATX or Mini-ITX motherboard. Installed graphics cards can be up to 320 millimeters long, and there is 160 millimeters of clearance for most common CPU coolers. The front allows for two 120 mm or 140 mm fans. Two additional 120 mm fans can be mounted on the top. A 120 mm ARGB fan is already pre-installed at the rear. If you prefer a water-cooled system, a 240 or 280 mm radiator can be mounted at the front. A 120 mm radiator can be installed at the rear. Under the power supply cover, there are two bays for 3.5-inch drives and an independent compartment for 2.5-inch drives on the motherboard tray. The K2 Plus offers high flexibility for installing different drives according to your needs.

Stylish case for motherboards up to ATX, side panel made of tempered glass, design front with RGB LED strip, 2x 2.5/3.5-inch and 2x 2.5-inch slots, I/O panel with 1x USB 3.0 and 1x USB 2.0 and RGB control.

For the compact and slim Inspire K8 ARGB midi-tower case, Kolink has come up with something truly special: the front panel features a striking 3D diamond pattern and is complemented by a digitally addressable RGB LED strip, which can be controlled via the I/O panel. The lightly tinted tempered glass side panel provides a view of the interior, for example, an ATX motherboard. This midi-tower also offers enough space for powerful hardware and sufficient drives to create the ideal gaming system. This makes the Kolink Inspire K8 ARGB the perfect case for budget-conscious users with a taste for exceptional design. An overview of the Kolink Inspire K8 ARGB Midi-Tower: Eye-catching front with 3D diamond pattern and ARGB strip Tempered glass side panel and PSU shroud for a clean look 1x pre-installed 120mm ARGB fan at the rear Space for up to 6x 120mm fans, 240mm radiators at the front Room for graphics cards up to 300mm long and CPU coolers up to 155mm I/O panel with 1x USB 3.0, 2x USB 2.0, and RGB LED control Space for 2x 3.5/2.5-inch and 4x 2.5-inch drives Inspire K8 ARGB: Affordable midi-tower from Kolink for gamers The Kolink Inspire K8 ARGB is a very affordable midi-tower, suitable for style-conscious gamers. The front panel with its 3D diamond pattern is particularly eye-catching. The digital addressable RGB LED strip on the front highlights the look and can be controlled via a button on the I/O panel or directly via the motherboard. At the top of the front cover is the I/O panel, featuring two USB 2.0 ports and one USB 3.0 port as well as the RGB lighting control. A lightly tinted tempered glass side panel completes the stylish design of the Inspire K8 ARGB. The interior accommodates ATX, Micro-ATX, or Mini-ITX motherboards. Installed graphics cards can be up to 300mm long, and there is 155mm of clearance for most standard CPU coolers. For cable management, there are optimally placed cable routing holes in both the motherboard tray and PSU shroud, as well as ample space between the motherboard tray and the right side panel. Power supplies up to 180mm in length are supported. Generous cooling options, plenty of room for drives The spacious gaming case accommodates up to six 120mm fans. In addition to the pre-installed 120mm fan at the rear, there is space for two more at the top and at the front. The pre-installed fan also features digitally addressable RGB lighting, which, like the front LED strip, can be controlled via the I/O panel or a compatible motherboard. The top panel features a honeycomb pattern that prevents dust accumulation while ensuring proper airflow. Naturally, the bottom-mounted PSU is protected by a dust filter. There is also ample room for water cooling, with space for a 240mm radiator at the front. Behind the PSU shroud are drop-and-lock slots for mounting either two 3.5-inch or 2.5-inch drives. Additional 2.5-inch drives can be installed on top of the PSU shroud or next to the motherboard. With its spacious interior, the Kolink Inspire K8 ARGB is perfectly suited for building powerful gaming setups.

Midi-tower PC case with excellent airflow Six pre-installed Kolink Umbra ARGB 120 mm and 140 mm fans Extensive hardware support with ATX motherboards and 330 mm GPUs Front and side panel made of tempered glass, hinged side panel with magnetic closure Integrated cable management for clean builds Available in black or white The stylish Observatory HF Glass ARGB Midi-Tower Enhance your gaming aesthetics with the Kolink Observatory HF Glass ARGB PC case. This midi-tower features six Kolink Umbra ARGB fans and offers plenty of space for your high-end hardware. Colorful and functional! And thanks to integrated ventilation and dust filters, this PC case has a natural airflow that keeps your hardware components cool. The Kolink Observatory HF Glass ARGB PC case is made from a combination of high-quality materials. The chassis is made of 0.5 mm SPCC steel, while the outer panels are made of either glass or flat metal. There are two Observatory HF models, both available in black or white. This is the Glass Edition with an elegant glass front, surrounded by white trim for a classic aesthetic. In addition, the Kolink Observatory HF Glass ARGB adds colorful accents with six ARGB fans pre-installed in the case. These fans can be controlled via the reset button. Extensive hardware support The Kolink Observatory HF Glass ARGB PC case has been intelligently designed to offer broad support for a wide range of gaming hardware. This case can accommodate Mini-ITX, Micro-ATX, and ATX motherboards and features seven expansion slots at the rear to support PCIe cards. There is 330 mm of clearance for GPUs, making this case compatible with a large selection of graphics cards currently available. In addition, there is a dedicated PSU shroud under which ATX power supplies up to 180 mm in length can fit. Next to it, there is a drive cage for 2.5-inch or 3.5-inch drives. There are also four drive bays on the back of the motherboard tray. Two of them can be used for either 2.5-inch or 3.5-inch drives, while the other two are intended exclusively for 2.5-inch SSDs. Elite-class cooling The Kolink Observatory HF Glass ARGB Midi-Tower comes equipped with six pre-installed Kolink Umbra ARGB fans in both 120 mm and 140 mm sizes. Three 140 mm fans are mounted at the front, while two 120 mm fans are installed at the top and a single fan at the rear. The lighting of the fans can be controlled either via the integrated RGB button on the I/O panel or via one of the 140 mm fans, which is connected to the motherboard using a 5V 3-pin adapter. Alternatively, up to three 120 mm fans can be installed at the front, while two 140 mm fans can be mounted on the top panel. In addition, there are slots for two 120 mm fans on the PSU shroud, enabling direct cooling of the PSU chamber and the graphics card. Those who prefer water cooling can install radiators at the front or rear instead of fans. A 360 mm radiator fits at the front, while a 120 mm model fits at the rear. Finally, there is room for CPU coolers up to 160 mm high. For clean builds To offer you versatile connectivity options, the Kolink Observatory HF Glass ARGB Midi-Tower features a comprehensive I/O panel. It provides one USB 3.0 port, two USB 2.0 ports, and one HD audio port, as well as fan control and a reset button. Inside, the Kolink Observatory HF Glass ARGB features integrated cable management. The motherboard backplate has intelligently placed cutouts that make routing your cables a breeze and keep your gaming PC looking tidy.

Midi-Tower PC case with mesh front panel for excellent airflow Six pre-installed Kolink Umbra ARGB 120 mm and 140 mm fans Extensive hardware support with ATX motherboards and 330 mm GPUs Tempered glass side panel, hinged with magnetic closure Integrated cable management for clean builds Available in black or white The stylish Observatory HF Mesh ARGB Midi-Tower Enhance your gaming aesthetics with the Kolink Observatory HF Mesh ARGB PC case. This midi-tower features six Kolink Umbra ARGB fans and provides ample space for your high-end hardware. Colorful and functional! Thanks to integrated ventilation and dust filters, this PC case offers natural airflow to keep your hardware components cool. The Kolink Observatory HF Mesh ARGB PC case is made from a combination of high-quality materials. The chassis is constructed from 0.5 mm SPCC steel, with panels made of either glass or flat metal. There are two Observatory HF models, both available in black or white finishes. This is the Glass Edition, featuring a mesh front surrounded by a white panel for increased airflow. Additionally, the Kolink Observatory HF Mesh ARGB makes a statement with six pre-installed ARGB fans that can be controlled via the reset button. Extensive hardware support The Kolink Observatory HF Mesh ARGB PC case is intelligently designed to accommodate a wide range of gaming hardware. It can house Mini-ITX, Micro-ATX, and ATX motherboards and features seven rear expansion slots for PCIe cards. With 330 mm of clearance for GPUs, this case is compatible with a wide selection of currently available graphics cards. There is also a dedicated PSU shroud underneath which ATX power supplies up to 180 mm in length can fit. Next to this is a drive cage for 2.5-inch or 3.5-inch drives. On the back of the motherboard tray are four drive mounts—two of which can be used for 2.5-inch or 3.5-inch drives, and two designed solely for 2.5-inch SSDs. Elite-class cooling The Kolink Observatory HF Mesh ARGB Midi-Tower comes with six pre-installed Kolink Umbra ARGB fans in both 120 mm and 140 mm sizes. Three 140 mm fans are mounted at the front, two 120 mm fans are at the top, and a single fan is at the rear. The fans’ lighting can be controlled either via the integrated RGB button on the I/O panel or through one of the 140 mm fans connected to the motherboard via a 5V 3-pin adapter. Alternatively, up to three 120 mm fans can be installed at the front, while two 140 mm fans can be mounted on the top. There are also slots for two 120 mm fans on the PSU shroud, allowing direct cooling of the PSU chamber and the graphics card. If you prefer water cooling, radiators can be installed instead of fans—up to a 360 mm radiator at the front and a 120 mm model at the rear. There is also space for CPU coolers up to 160 mm high. For clean builds To provide a variety of connectivity options, the Kolink Observatory HF Mesh ARGB Midi-Tower features an extensive I/O panel. It includes one USB 3.0 port, two USB 2.0 ports, an HD audio jack, fan control, and a reset button. Inside, the Kolink Observatory HF Mesh ARGB features integrated cable management. The motherboard tray offers intelligently placed cutouts, making cable routing simple and keeping your gaming PC looking tidy.

Midi-Tower PC case with excellent airflow Supports ATX motherboards and GPUs up to 330 mm long Stylish glass side panel with air inlets for optimal airflow Drive bays for up to four 2.5-inch drives Integrated cable management for a neat and tidy build Comprehensive front I/O with fan control support The Kolink Observatory HF Mesh Core Midi-Tower: Airflow in Focus Boost your gaming PC’s performance at an affordable price with the Kolink Observatory HF Core PC case. This midi-tower offers extensive support for high-performance gaming hardware and numerous cooling options. The intelligently designed interior ensures maximum flexibility and makes assembling your new build easy. The PSU shroud and cable grommets create a clean look—tidy and functional! Thanks to its side air inlets and fine mesh front panel, the Kolink Observatory HF Core delivers outstanding airflow to keep your hardware cool. This midi-tower case is constructed from high-quality materials. The chassis is made of steel, while the right side panel is completely tempered glass. The side panel is hinged for easy access during installation and upgrades. Note: This case comes with no pre-installed fans, saving you money and giving you total freedom of choice. Room for high-performance gaming hardware The Kolink Observatory HF Mesh Core offers extensive support for your gaming hardware. It supports ATX, Micro-ATX, and Mini-ITX motherboard form factors, providing wide compatibility. There are seven PCI expansion slots and space for high-end GPUs up to 330 mm long as well as CPU coolers up to 160 mm tall. In addition to supporting power supplies up to 180 mm in length, the case also has four drive bays for versatile storage solutions. Two bays can accommodate either 2.5-inch or 3.5-inch drives, while the other two are dedicated to 2.5-inch SSDs. Optimized airflow for your gaming PC At the front, you can mount up to three 120 mm or 140 mm fans or a radiator up to 360 mm. The top supports either two 120 mm or 140 mm fans, and the PSU shroud can hold up to two 120 mm fans. At the rear, you can install a 120 mm fan or a 120 mm radiator. ATX case with a wide range of connectivity options The Kolink Observatory HF Mesh Core features one USB 3.0 and two USB 2.0 ports as part of the front I/O panel for your peripherals or USB drives. The panel also includes an HD audio jack and power and reset buttons. You can control fan speed via the reset button or through a 3-pin ARGB cable on your main fan.

Midi-Tower PC case with excellent airflow Includes six pre-installed PWM-ARGB fans Supports ATX motherboards and GPUs up to 330 mm in length Stylish glass front and side panel with side ventilation for optimal airflow Drive bays for up to four 2.5-inch drives Integrated cable management for neat cable organization Comprehensive front I/O with fan control support The Kolink Observatory HF Plus Glass Midi-Tower: Combining design and performance Boost your gaming PC's performance at an affordable price with the Kolink Observatory HF Plus PC case. This midi-tower offers comprehensive support for high-performance gaming hardware and numerous cooling options. The intelligently designed chassis ensures maximum flexibility and makes assembling your new build easy. The PSU cover and cable routing provide a tidy look, while RGB lighting skillfully highlights the interior - neat, colorful, and functional! Thanks to its side air intakes, the Kolink Observatory HF Plus offers excellent airflow to keep your hardware cool. This midi-tower case is made from high-quality materials. The chassis is made of steel, while the right side panel is entirely made of tempered glass. The side panel is fitted with a hinge and is thus swingable, making it easy for you to access for installation and upgrades. Note: This case comes with three 120 mm PWM-ARGB and three 140 mm PWM-ARGB fans pre-installed. So you don’t have to worry about choosing your fans and can get started right away. Space for powerful gaming hardware The Kolink Observatory HF Plus Glass offers comprehensive support for your gaming hardware. It supports ATX, Micro-ATX, and Mini-ITX motherboard form factors, ensuring wide compatibility. There are seven PCI expansion slots and space for high-end GPUs up to 330 mm long, as well as CPU coolers up to 160 mm high. Aside from fitting power supplies up to 180 mm in length, the case also features four drive bays to allow versatile storage solutions. Two bays can accommodate either 2.5-inch or 3.5-inch drives, while the other two are specifically for 2.5-inch SSDs. Optimized airflow for your gaming PC Although the Kolink Observatory HF Plus already comes fully equipped with six pre-installed ARGB PWM fans, it still offers ample support for additional cooling hardware. The front features three 140 mm fans, while the rear has one, and the top has two 120 mm fans installed. At the front, you can install up to three 120 mm or 140 mm fans or a radiator up to 360 mm. The top supports either two 120 mm or 140 mm fans, and the PSU shroud can fit up to two 120 mm fans. At the rear, you can install a 120 mm fan or a 120 mm radiator. ATX case with multiple connectivity options The Kolink Observatory HF Plus Glass features one USB 3.0 and two USB 2.0 ports as part of the front I/O panel for your peripheral devices or USB drives. This also includes an HD audio port as well as power and reset buttons. You control the fan settings via the reset button or a 3-pin ARGB cable on your main fan.

Midi-Tower PC case with mesh front for excellent airflow Includes six pre-installed PWM-ARGB fans Supports ATX motherboards and GPUs up to 330 mm in length Stylish glass side panel with side ventilation for optimal airflow Drive bays for up to four 2.5-inch drives Integrated cable management for clean cable organization Comprehensive front I/O with ARGB control The Kolink Observatory HF Plus Mesh Midi-Tower: Combining design and performance Enhance your gaming PC’s performance at an affordable price with the Kolink Observatory HF Plus PC case. This midi-tower offers comprehensive support for high-performance gaming hardware and numerous cooling options. The intelligently designed chassis provides maximum flexibility and makes assembly of your new build easier. The PSU cover and cable grommets ensure a tidy aesthetic, while the RGB lighting skillfully showcases the interior—neat, colorful, and functional! Thanks to its side air inlets, the Kolink Observatory HF Plus has excellent airflow to keep your hardware cool. This midi-tower case is made of high-quality materials. The chassis is steel, while the right side panel is made entirely of tempered glass. The side panel features a hinge and can be swung open, giving you easy access for installation and upgrades. Note: This case comes with three pre-installed 120 mm PWM-ARGB fans and three 140 mm PWM-ARGB fans. As a result, you don’t need to worry about selecting your own fans—you can get started right away. Room for high-performance gaming hardware The Kolink Observatory HF Plus Mesh offers extensive support for your gaming hardware. It supports ATX, Micro-ATX, and Mini-ITX motherboard form factors, providing broad compatibility. There are seven PCI expansion slots and space for high-end GPUs up to 330 mm long and CPU coolers up to 160 mm tall. In addition to room for power supplies up to 180 mm long, the case also features four drive bays, allowing for versatile storage solutions. Two bays can accommodate either 2.5-inch or 3.5-inch drives, while the other two are exclusively for 2.5-inch SSDs. Optimized airflow for your gaming PC Although the Kolink Observatory HF Plus already comes fully equipped with six pre-installed ARGB PWM fans, it still offers ample support for additional cooling hardware. The front features three 140 mm fans, while the rear has one and the top has two 120 mm fans installed. At the front, you can install up to three 120 mm or 140 mm fans, or a radiator up to 360 mm. The top supports either two 120 mm or 140 mm fans, and the PSU cover can hold up to two 120 mm fans. At the rear, you can install a 120 mm fan or a 120 mm radiator. ATX case with numerous connectivity options The Kolink Observatory HF Plus Mesh features one USB 3.0 and two USB 2.0 ports on the front I/O panel for your peripheral devices or USB drives. This also includes an HD audio jack, as well as power and reset buttons. The ARGB lighting can be easily controlled using the reset button or via a 3-pin ARGB cable on your primary fan.

Midi-Tower with exceptional black design Features a half-sized, flip-open tempered glass panel Front panel made of glass and PSU shroud made of mesh Supports ATX motherboards and GPUs up to 330 mm in length Five pre-installed Kolink Umbra ARGB fans Four drive bays The Observatory MX Glass ARGB Midi-Tower The Kolink Observatory MX Glass ARGB Midi-Tower is a midi-tower designed for advanced gaming setups Enhance your gaming PC with the bold design of the Kolink Observatory Midi-Tower from the MX series. The distinctive color scheme, half-sized, flip-open tempered glass side panel, and front tempered glass panel provide a striking aesthetic for any gaming PC. The five pre-installed Kolink Umbra ARGB fans and the mesh PSU shroud ensure ample airflow to keep your components at optimal temperatures. The Observatory MX Glass ARGB Midi-Tower Choose between aesthetics and airflow The Kolink Observatory MX series consists of two models, each available in three color variants. You can choose between the Glass and Mesh versions, as well as the colors black, white, or black-and-white. This is the Glass model in black. The front panel is made of tempered glass, featuring subtle side mesh vents. To ensure optimal airflow, the PSU shroud is fitted with a mesh covering. As a black model, the exterior, interior, and shroud are all finished in black, with a dual-tone material surface for a special visual effect. The Observatory MX Glass ARGB Midi-Tower Generous hardware support The Kolink Observatory MX Glass not only looks great, but also offers incredible support for a wide range of hardware. This case can accommodate Mini-ITX, Micro-ATX, or ATX motherboards and features seven expansion slots at the rear for PCIe devices. In the main chamber, there is up to 330 mm of space for graphics cards. The dedicated PSU shroud can house power supplies up to 180 mm. There is also a four-bay drive cage; two bays can hold either 2.5" SSDs or 3.5" HDDs, while the other two are suitable only for 2.5" drives. The Observatory MX Glass ARGB Midi-Tower Ample airflow out of the box To keep your gaming PC at optimal temperatures, the Kolink Observatory MX Glass supports both air and water cooling. Five Kolink Umbra ARGB fans are pre-installed to enhance airflow through the numerous mesh panels. At the front, there are two 140 mm fans. On the top, there are two 120 mm fans, and a single 120 mm fan is installed at the rear. Alternatively, the case supports radiators and additional fans throughout. The front can accommodate up to two 140 mm fans or a 240 mm, 280 mm, or 360 mm radiator. The rear 120 mm fan mount can alternatively house a 120 mm radiator. The top only fits two 120 mm fans, but there are also two 120 mm mounts on the PSU shroud to cool the second chamber. Finally, the Kolink Observatory MX Glass supports CPU coolers up to 160 mm in height. The Observatory MX Glass ARGB Midi-Tower Additional features The Kolink Observatory MX Glass features a USB 3.0 and a USB 2.0 port as part of the I/O panel, as well as an HD audio jack. There is also a reset button that can be used to control the fans. Alternatively, these can be connected via a 3-pin 5V header on the motherboard and controlled by daisy-chaining through the first fan.

Midi-Tower with exceptional design in black With a half, foldable tempered glass side panel Mesh front panel and enclosed PSU cover Support for ATX motherboards and GPUs up to 330 mm in length Five pre-installed Kolink Umbra ARGB fans Four drive bays The Observatory MX Mesh ARGB Midi-Tower The Kolink Observatory MX Mesh ARGB Midi-Tower for sophisticated gaming setups Give your gaming PC a bold design with the Kolink Observatory PC case from the MX Series. The customized color scheme, half foldable tempered glass side panel, and the enclosed PSU shroud create a striking aesthetic for any gaming PC. The five pre-installed Kolink Umbra ARGB fans and the mesh front panel ensure sufficient airflow to keep your components at optimal temperature. The Observatory MX Mesh ARGB Midi-Tower Choose between aesthetics or airflow The Kolink Observatory MX Series consists of two models available in three color variants each. You can choose between the Mesh and Mesh variant as well as the colors black, white, or black-white. This is the Mesh model in black. The front panel is made of mesh to ensure that this case has sufficient airflow. The PSU cover, on the other hand, is made of solid steel. As the black model, the exterior, interior, and shroud are all finished in black, with a dual-toned surface for a special effect. The Observatory MX Mesh ARGB Midi-Tower Ample hardware support The Kolink Observatory MX Mesh not only looks good but also provides incredible support for a variety of hardware. This case can accommodate a Mini-ITX, Micro-ATX, or ATX motherboard, and features seven expansion slots on the back for PCIe devices. In the main chamber, there is 330 mm of space for graphics cards. The dedicated PSU cover can accommodate power supplies up to 180 mm. There is also a drive cage with four bays. Two of these can hold either 2.5-inch SSDs or 3.5-inch HDDs, while the other two are only suitable for 2.5-inch drives. The Observatory MX Mesh ARGB Midi-Tower Plentiful airflow out of the box To keep your gaming PC at optimal temperature, the Kolink Observatory MX Mesh can support both air and water cooling. The case comes with five pre-installed Kolink Umbra ARGB fans to aid airflow through all the mesh. At the front, there are two 138 mm fans. On the top, there are two 120 mm fans, and there is also a single 120 mm fan installed at the rear. Alternatively, the case supports radiators and additional fans throughout. At the front, you can fit up to two 138 mm fans or a 240 mm, 280 mm, or 360 mm radiator. At the rear, the 120 mm fan mount can take a 120 mm radiator instead. The top can only support the two 120 mm fans, but there are also two 120 mm mounts on the PSU shroud to cool the second chamber. Finally, the Kolink Observatory MX Mesh can accommodate CPU coolers up to 160 mm in height. The Observatory MX Mesh ARGB Midi-Tower Additional features The Kolink Observatory MX Mesh features a USB 3.0 and a USB 2.0 port as part of the I/O panel, as well as an HD audio jack. There is also a reset button, which can be used to control the fans. Alternatively, the fans can be connected via a 3-pin 5V header to the motherboard and controlled via daisy-chaining through the first fan.

Midi-Tower with exceptional design in white With a half, fold-out tempered glass panel Mesh front panel and enclosed PSU shroud Supports ATX motherboards and GPUs up to 330 mm in length Five pre-installed Kolink Umbra ARGB fans Four drive bays The Observatory MX Mesh ARGB Midi-Tower The Kolink Observatory MX Mesh ARGB Midi-Tower for advanced gaming setups Take your gaming PC to bold new looks with the Kolink Observatory PC case from the MX series. The unique color scheme, the half fold-out tempered glass side panel, and the enclosed power supply shroud offer strong aesthetics for any gaming PC. The five pre-installed Kolink Umbra ARGB fans and mesh front ensure sufficient airflow to keep your components at optimal temperature. The Observatory MX Mesh ARGB Midi-Tower Choose between aesthetics or airflow The Kolink Observatory MX series includes two models, each available in three color variants. You can choose between the Mesh and non-Mesh versions as well as black, white, or black-and-white colors. This is the Mesh model in white. The front panel is made of mesh to ensure this case has enough airflow. The PSU shroud, on the other hand, is made of solid steel. As the white model, the exterior, interior, and coverings are all in white, with a dual-toned material finish for a special effect. The Observatory MX Mesh ARGB Midi-Tower Generous hardware support The Kolink Observatory MX Mesh not only looks good, but also provides incredible support for a wide range of hardware. This case can house a Mini-ITX, Micro-ATX, or ATX motherboard and features seven expansion slots at the rear for PCIe devices. The main chamber has 330 mm of space for graphics cards. The dedicated PSU shroud can fit power supplies up to 180 mm. There's also a drive cage with four bays. Two of these can accommodate either 2.5-inch SSDs or 3.5-inch HDDs, while the other two are only suitable for 2.5-inch drives. The Observatory MX Mesh ARGB Midi-Tower Plenty of airflow out of the box To keep your gaming PC at optimal temperatures, the Kolink Observatory MX Mesh supports both air and water cooling. Five Kolink Umbra ARGB fans come pre-installed to maximize airflow through the extensive mesh panels. The front features two 140 mm fans. On top are two 120 mm fans, and at the rear, a single 120 mm fan is installed. Alternatively, the entire case supports radiators and additional fans. At the front, you can fit up to two 140 mm fans or a 240 mm, 280 mm, or 360 mm radiator. At the rear, the 120 mm fan slot can alternatively take a 120 mm radiator. The top only supports two 120 mm fans, but there are also two 120 mm slots on the PSU shroud to help cool the second chamber. Finally, the Kolink Observatory MX Mesh can accommodate CPU coolers with a height of up to 160 mm. The Observatory MX Mesh ARGB Midi-Tower Additional features The Kolink Observatory MX Mesh features a USB 3.0 and a USB 2.0 port as part of the I/O panel, as well as an HD audio jack. There's also a reset button, which can be used to control the fans. Alternatively, the fans can be connected to the motherboard via a 3-pin 5V header and controlled via daisy-chaining through the first fan.

The manufacturer Kolink, now renowned for its innovative and high-performance cases, presents the feature-rich Refine Midi-Tower—a gaming case that offers ample space for powerful hardware behind its stylish exterior. A robust gaming setup based on an E-ATX motherboard can be admired through a tempered glass side door, while a PSU shroud conceals unsightly cables. The front panel, made of brushed aluminum in dark gray, underlines the elegant look, further accented by a side-mounted digitally addressable RGB LED strip. The lighting can be controlled via a switch on the I/O panel. Alternatively, the strip can also be connected directly to a motherboard and controlled from there. Effective ventilation is ensured by a fine mesh with an integrated dust filter on the top. A pre-installed 120 mm fan provides adequate airflow. The features of the Kolink Refine Midi-Tower at a glance: Stylish midi-tower for motherboards up to E-ATX format Side panel made of tempered glass with hinges Front panel of brushed aluminum in dark gray Subtle digitally addressable RGB lighting at the front One pre-installed 120 mm fan at the rear Supports up to five 120 mm and four 140 mm fans in total Space for graphics cards up to 380 mm, CPU coolers up to 160 mm I/O panel with RGB LED control, 1x USB 3.2 Gen 2 Type C (10 Gbit/s), 1x USB 3.0 (5 Gbit/s), and 2x USB 2.0 Kolink Refine: Plenty of room for powerful gaming hardware Although its external dimensions are those of a midi-tower, the Refine’s sophisticated design allows it to accommodate a motherboard up to E-ATX format. There is also ample space for graphics cards, with up to 380 mm available to the front. At 160 mm, there’s plenty of room for standard CPU coolers as well. A shroud hides the power supply and HDD cage, which can house either two 3.5-inch or two 2.5-inch drives. Two additional 2.5-inch SSDs can be mounted at the back of the motherboard tray. If you prefer air cooling, there are enough slots for 120 mm fans. The front can accommodate two 120 mm or two 140 mm fans. The top can also hold either two 120 mm or two 140 mm fans. The top is equipped with mesh to allow nearly unrestricted airflow. A dust filter ensures that the hardware inside doesn’t have to be cleaned constantly. At the back, a powerful 120 mm fan is already installed. There’s room for a 280 mm radiator at the front, while the pre-installed fan at the rear can be replaced with a 120 mm radiator. Tempered glass and RGB LEDs present hardware skillfully Well-placed grommets and clips enable sophisticated cable management. The spacious interior can be admired through a tempered glass side door, which can also be removed on its hinges. There is a strip with digitally addressable RGB LEDs on the side of the brushed aluminum front. The lighting effects are controlled via a switch on the I/O panel—alternatively, the strip can be connected directly to the motherboard and controlled there. In this case, the RGB switch on the I/O panel can be used as a reset button. Alongside the RGB/reset switch, you’ll find a USB 3.2 Gen 2 Type C port (10 Gbit/s), a USB 3.0 port (5 Gbit/s), two USB 2.0 ports, 3.5 mm jacks for headphones and microphone, and finally, power and HDD LEDs.

ROCKET COMPLEX Joining the Rocket line-up, we have the Rocket Complex Mini-ITX Case. Featuring the iconic hexagonal cut-outs, this tower-style chassis takes inspiration from the Xbox Series X console and is designed to support high-end gaming hardware. Manufactured from aluminium, this case has a tempered glass side panel and an anodised, titanium grey finish. Despite its small form factor, this case has a 20.4L capacity and an intelligent layout to allow for premium components. Plus, this is the first Kolink case to include a PCIe 4.0 riser cable as standard. The Features of Kolink Rocket Complex Mini-ITX Case at a Glance: Mini-ITX, tower-style chassis Features the iconic Rocket series hexagonal cut-out design Tempered glass side panel for viewing hardware Removable panels and screws allow for extreme stripping down Supports Mini-ITX motherboards and SFX/SFX-L PSUs Can host a 2.8 slot GPU up to 330mm in length First Kolink case to include a PCIe 4.0 riser cable as standard I/O panel features USB3.2 Gen 2 Type-C and USB 3.0 ports Towering Stature Near unique in its style, the Rocket Complex Mini-ITX Case takes influence from the Xbox Series X console, thus creating a tower chassis but in smaller proportions. With a 20.4L capacity, however, there is still plenty of room for premium hardware, all contained within a diminutive footprint. The exterior supports a well-equipped I/O panel, featuring a USB3.2 Gen 2 Type-C and USB 3.0 port. The Rocket Complex is a fantastic chassis for hardware and SFF enthusiasts. Naturally, this Mini-ITX case can accommodate a motherboard of the same size. GPUs can be up to 2.8 slots & 330mm in length, which covers most of the models currently available, and they can be mounted vertically with the included PCIe 4.0 riser cable. In fact, this is the first Kolink case to include a Gen 4 riser cable as standard. The PSU bracket can accommodate an SFX power supply, but should you need a higher wattage this bracket can be removed, allowing for an SFX-L unit to be installed. Comprehensive Cooling Featuring the iconic Rocket series hexagonal cut-outs, the natural airflow of this case is exceptional. Plus, the Rocket Complex has two integrated Kolink Classic 120mm PWM fans to further support your cooling system. Paired with the passive transfer of heat, thanks to its aluminium structure, this case is great for enthusiast and high-end builds. In addition to this, the Rocket Complex Mini-ITX Case can host 240mm AiO cooling systems, with the CPU block up to 62.5mm in height. If you opt for air cooling, then the CPU cooler can be up to 110mm. Easy Assembly Rather than using rivets, the Rocket Complex is held together with screws, meaning this chassis can be easily stripped down. Thus, making the installation of components, such as the AiO and PSU, much simpler. What’s more, each of the panels can be removed – including the top panel. This allows you the access needed to build within this small form factor chassis. Three of the panels are anodised, titanium grey aluminium, whilst the final utilises tempered glass allowing you to admire your handiwork.

Midi-Tower with excellent hardware support Three pre-installed Kolink 120 mm PWM fans Front and side panels with extensive mesh Supports GPUs up to 400 mm – both horizontal and vertical installation! Supports extensive air and water cooling Space for ATX motherboards and CPU coolers up to 168 mm high The Kolink Unity Meshbay Performance Midi-Tower Kolink Unity Meshbay Performance: Midi-Tower for extensive cooling Upgrade your gaming PC with the Kolink Unity Meshbay Performance Midi-Tower case. This case features excellent hardware support as well as phenomenal built-in ventilation, making it the ideal foundation for your high-performance gaming PC. With space for ATX motherboards, 400 mm long GPUs, and up to three radiators, you can install a wide range of high-end hardware. In addition, three Kolink 120 mm PWM fans come pre-installed, providing efficient cooling right out of the box. The Kolink Unity Meshbay Performance Midi-Tower Elegant and sleek The Kolink Unity Meshbay Performance Midi-Tower will make a statement in your gaming setup. Its classic black finish, coupled with ample mesh and pre-installed fans, gives you endless creative possibilities for your build. The case is made from 0.7 mm thick SPCC steel, while the additional panels are crafted from metal and ABS plastic. The left side panel features a large mesh area for near-unobstructed views of your components and optimal cooling. The front panel also has extensive mesh. The right side panel similarly features mesh, allowing installed fans to draw in fresh air. This enables excellent airflow while emphasizing the stylish look of the Kolink Unity Meshbay Performance. The Kolink Unity Meshbay Performance Midi-Tower Extensive hardware support The Kolink Unity Meshbay Performance Midi-Tower is designed to accommodate a wide range of gaming hardware, including the latest graphics cards from NVIDIA and AMD. It supports common motherboard sizes up to ATX, offering outstanding flexibility for your gaming PC foundation. The rear of the case features seven expansion slots for PCIe cards. There are also two slots for vertically mounting a GPU, letting you choose between different graphics card orientations. Both configurations offer 400 mm clearance, enough space for most current GPUs – including your NVIDIA GeForce RTX 4080 or 4090. Please note, riser cables are sold separately. The Kolink Unity Meshbay Performance Midi-Tower Well-equipped for power supplies and drives Additionally, the Kolink Unity Meshbay Performance includes a dedicated, shortened PSU shroud to keep the interior clean and tidy. Underneath, you can install ATX power supplies up to 180 mm in length. Four drive bays are available for storage devices: two support 2.5-inch SSDs and the other two are designed for 3.5-inch HDDs. The Kolink Unity Meshbay Performance Midi-Tower Perfect cooling The pre-installed fans in the Kolink Unity Meshbay Performance PC case are 120 mm PWM fans from Kolink. Two are mounted at the front and one at the rear. The front supports up to three 120 mm or optionally 140 mm fans, as does the top panel. Additionally, you can install up to three 120 mm fans in front of or on the PSU shroud. Alternatively, you can use water-cooled radiators. The front can accommodate a 360 mm radiator, and the top can also fit radiators up to 360 mm. The rear can hold a 120 mm radiator. Finally, there is space for CPU coolers up to 168 mm high, so this case supports a wide range of currently available coolers. Connectivity The Kolink Unity Meshbay Performance PC case features a fully equipped I/O panel for extensive connectivity options. It provides two USB 3.0 ports, one USB 2.0 port, and HD Audio. There is ample cable management space behind the motherboard tray, with 24 mm of clearance.

The Kolink Void Midi-Tower is characterized by its unique design and high functionality. The highlight is the front panel with a V-shaped cutout featuring digitally addressable RGB LED strips, whose lighting is enhanced by an infinity mirror effect. A pre-installed 120 mm rear fan, also equipped with digitally addressable RGB LEDs, cools and illuminates the spacious interior of the extremely stylish midi-tower, which can be admired through a tempered glass side panel. Overall, the distinctive Kolink Void impresses with its striking and modern design. The features of the Kolink Void at a glance V-shaped cutout with infinity mirror effect and RGB lighting Tempered glass side panel for an unobstructed view of the interior Supports ATX, Micro-ATX, and Mini-ITX motherboards One pre-installed 120 mm fan with digitally addressable RGB lighting Support for radiators up to 240 mm at the front I/O panel with 2x USB 3.0 & 2x USB 2.0, HD-Audio, RGB LED control Power supply cover with ventilation slots for a clean look Supports graphics cards up to 310 mm, CPU coolers up to 160 mm, power supplies up to 180 mm Kolink Void: Exquisite design meets high performance The digitally addressable RGB LED strips, whose lighting is enhanced by the infinity mirror effect on the front panel, can be controlled via a switch on the I/O panel, as can the rear-mounted 120 mm RGB LED fan. Alternatively, both the strips and the fan can be connected and controlled via a suitably equipped motherboard using the standardized 3-pin connectors (5VDG). In this case, the switch for RGB LED control can be repurposed as a reset button. Thanks to the tempered glass side panel, the lighting inside the Kolink Void can also be admired. In addition to the pre-installed fan, up to five more 120 mm fans can be installed – three at the front and two on the top panel. There's also a magnetic dust filter on the honeycomb mesh at the top. Side ventilation slots at the front and in the power supply cover provide extra airflow. Alternatively, a 240 mm radiator can be installed at the front instead of fans. The Kolink Void: Plenty of space for your hardware The entire interior is coated in black and includes a power supply shroud for a particularly clean look. There is a pre-installed drive cage with mounts for two 3.5" or 2.5" drives and the power supply itself. At the back of the motherboard tray, there is a mount for two more 2.5" drives. The motherboard tray and power supply shroud offer numerous cut-outs for advanced cable management. At the bottom there is a removable dust filter for an ATX power supply up to 18 cm in length. Graphics cards up to 31 cm long and CPU coolers up to 16 cm high are supported. The front I/O panel features two USB 2.0 ports and two USB 3.0 Type-A ports.

<p>adapterikomplekt HDD ja SSD kõvakettadele, CD- ja DVD-ajamitele, sh toiteallikas ja ühenduskaabel</p><p>Võimas vahend varundamiseks ja ülikiireks andmetele juurdepääsuks! Suure jõudlusega adapter on paindlik lahendus andmete varundamiseks ja IDE-, SATA- ja SATA SSD-kõvaketaste lugemiseks. Adapteriga saate kiiresti ja lihtsalt ühendada vanad kõvakettad sülearvutite ja muude vastuvõtvate seadmetega, ilma et oleks vaja neid arvutisse paigaldada. Tänu Plug & Play funktsioonile tunneb vastuvõttev seade kõvaketta ühendamisel ära, mistõttu ei ole vaja paigaldada eraldi draivereid.</p><p>Kompaktne adapter kuni kolme IDE-, EIDE- või SATA-kõvaketta ühendamiseks arvutiga korraga - lihtsalt USB kaudu.</p><p>Ühendage sisseehitatud kõvakettad hõlpsasti USB-A kaudu host-seadmetega - ilma, et neid oleks vaja paigaldada lauaarvutisse või kõvakettakesta korpusesse.</p><p>SATA-USB-adapter sobib ideaalselt andmete varundamiseks, andmete taastamiseks või kõvaketaste ja CD/DVD-ketaste testimiseks.</p><p>Adapteriga ühendatud SSD-kõvakettad saavutavad andmeedastuskiiruse kuni 248,5 Mbit/s.</p><p>Sisseehitatud olekuledid näitavad vastava pordi toite ja andmeaktiivsust</p><p>Kaasas USB 3.0 A-tüüpi B-tüüpi kaabel kuni 5 Gbit/s andmesidekiiruseks, mis ühildub tagurpidi USB 2.0-ga.</p><p>Sisaldab 12 V toiteplokki välise toiteallika jaoks ja Molex-kaablit IDE/SATA-ketaste (2,5 ja 3,5 tolli) ühendamiseks.</p>

Korpus Lian Li KAST O11DMIV2W.00, 423.6 mm, 273.3 mm, 391.95 mm, 4 x 2.5" ketta, 2 x 3.5" ketta, 2 x USB 3.0, 1 x USB 3.2 Gen 2 Type-C

Korpus Lian Li Korpus O11D MINI V2 FLOW G99.O11DMIV2FW.00, 423.6mm, 273.3mm, 391.95mm, 2xUSB 3.0, 4x2.5"/2x3.5"

<div> Tööriistavaba konstruktsiooniga korpus</div> <div> USB 3.2 / 3.1 Gen 1 / USB 3.0 SuperSpeed liides (5Gbps)</div> <div> Toetab 2,5" kõvakettaid ja kuni 9,5 mm kõrguseid SSD-kettaid</div> <div> Toetab SATA kuni 6 Gbps</div> <div> 2-aastane garantii</div> <div> </div> <div> </div> <div> Lindy USB 3.0 SATA Enclosure 2.5" muudab tavalise 2,5-tollise SATA-kõvaketta või pooljuhtketta kaasaskantavaks väliseks kõvakettaks. See on kiire salvestuslahendus, mis toetab USB 3.0 kaudu kuni 5 Gbit/s ja SATA kaudu kuni 6 Gbit/s andmeedastuskiirust.</div> <div> </div> <div> </div> <div> </div> <div> Korpus võimaldab kasutajal lisada arvutisse kiiresti täiendava 2,5-tollise SATA HDD/SSD-ketta ilma korpust avamata. Kompaktne ja kerge korpus on väga hästi kaasaskantav, mis sobib ideaalselt mobiilseteks rakendusteks või ajutiseks lauaarvuti varundamiseks ja salvestamiseks. Sellel on tööriistavaba konstruktsioon, mis lihtsustab ketta paigaldamist. Korpus on bussitoitega, seega ei ole vaja välist toiteallikat.</div> <div> </div> <div> </div> <div> </div> <div> Teave USB 3.0, 3.1 ja 3.2 kohta</div> <div> </div> <div> </div> <div> </div> <div> USB 3.0, USB 3.1 ja USB 3.2 arvutid, kaablid ja seadmed ühilduvad omavahel, kui kasutatakse kas USB Type A või USB Type C host-liidest.</div> <div> USB 3.0, USB 3.1 Gen 1 ja USB 3.2 Gen 1 toetavad kõik andmeedastuskiirust kuni 5 Gbps.</div> <div> USB 3.1 Gen 2 ja USB 3.2 Gen 2 toetavad mõlemad andmeedastuskiirust kuni 10 Gbit/s.</div>

<div> Delocki alumiiniumist korpusesse saab paigaldada 2,5″ SATA kõvaketta või SSD-ketta. Korpuse saab ühendada USB Type-A kaudu arvutiga või sülearvutiga.</div> <div> </div> <div> </div> <div> Spetsifikatsioon</div> <div> - Ühendused:</div> <div> välised: 1 x USB 3.0 Type-A emane</div> <div> sisemine: SATA 3 Gb/s 22-poldiline pesa: 1 x SATA 3 Gb/s 22-poldiline pesa</div> <div> - Sobib 2,5″ SATA HDD / SSD jaoks:</div> <div> Kõvaketta kõrgus kuni 9,5 mm</div> <div> SATA HDD / SSD kuni 6 Gb/s</div> <div> HDD / SSD kuni 2 TB</div> <div> - Kiibistik: Innostar IS621</div> <div> - Andmeedastuskiirus kuni 3 Gb/s</div> <div> - LED-indikaator toite ja juurdepääsu kohta</div> <div> - Mõõtmed (LxSxK): ca. 128 x 75 x 14 mm</div> <div> - Hot Plug, Plug & Play</div> <div> </div> <div> </div> <div> Süsteeminõuded</div> <div> - Linuxi tuum 3.17 või uuem</div> <div> - Mac OS 10.9 või uuem</div> <div> - Windows Vista/Vista-64/7/7/7-64/8.1/8.1-64/10/10-64</div> <div> - Arvuti või sülearvuti, millel on vaba USB A-tüüpi port</div> <div> </div> <div> </div> <div> Paketi sisu</div> <div> - 2,5″ väline korpus</div> <div> - USB 3.0 kaabel</div> <div> - Kaas, kruvikeeraja, kruvid</div> <div> - Kasutusjuhend</div>

Apple only Future-proof and always robust new USB-C connector corresponds to the next computer generation incl. USB 3.0 adapter, resistant to falling, impacts and water, to be used everywhere

LaCie kõvaketas Rugged Mini 2.5inch 4TB USB 3.0, Shock resistant

<p>.</p> <div class="theme-secondary text-center h1 font-light mt-5 mb-3">Product description</div> <div> <div class="product-description lanberg" id="product-description"> <div class="product-description-section product-description-section-without-margin"> <div class="product-description-center"><img src="https://web.impakt.com.pl/opisy/xxfaw5pg8l8t4jta18ch4tvx.png" alt="Gray S/FTP Cat 7 LAN cable, 305 meters, with copper wire, LSZH, CPR certified, featuring Fluke Passed verification by Lanberg" /></div> </div> <section class="pd pb-0"> <div class=" pb-30" style="background: #0C618E;"> <div class="product-description-center"><img src="https://web.impakt.com.pl/opisy/gcmlw4oxcd4k0k1t64tyvee2.jpg" alt="Front view of the Lanberg ATX server case, features a sleek black design with ventilation and USB ports, suitable for 19"/2U racks" /></div> <div style="padding-top: 40px;"> <h2 class="product-description-center" style="color: #ffffff!important;" data-class="h2">RACK 19" 2U server cases from Lanberg</h2> <div class="product-description-text product-description-text--with-padding product-description-center" style="color: #ffffff!important;"> <p style="text-align: justify;">Our <strong>19" RACK server chassis</strong> is an excellent choice for both professional data centers and advanced individual users. This <strong>2U case </strong>is designed to <strong>meet a variety of</strong> server construction and operation <strong>needs</strong>, while having a real <strong>impact on the performance of</strong> the entire system. Thanks to its well-thought-out design, it will perform well in business environments where reliability, flexibility and <strong>efficient</strong> airflow are important.</p> <p style="text-align: justify;">The new series is an advanced <strong>server chassis</strong> with a variety of fan configurations and mounting space, making it even easier to <strong>expand</strong> hardware capabilities. These <strong>enclosures</strong> are distinguished by their robust construction, space for numerous storage media, and rich I/O panels for quick connection of devices via <strong>USB 3.0</strong> ports. Importantly, our models support a variety of motherboard standards, and practical accessories are included for easy installation. As <strong>a</strong> result, each <strong>server</strong> can be configured optimally for <strong>server operation</strong> and flexibly adapted to changing needs.</p> </div> </div> </div> </section> <section class="pd"> <div class=""> <div class="product-description-center"><img src="https://web.impakt.com.pl/opisy/0sxalqt53ru2cv8g27i4ktyo.jpg" alt="Interior view of the LANBERG ATX server case, showcasing cable management and designated connector areas" /></div> <div style="padding-top: 40px;"> <h2 class="product-description-center" style="color: #000!important;" data-class="h2">Supported ATX, ITX, Micro-ATX and SSI CEB motherboards</h2> <div class="product-description-text product-description-text--with-padding product-description-center" style="color: #000!important;"> <p style="text-align: justify;"><strong>The</strong> SC01-5202-12B <strong>server case</strong> is compatible with <strong>ATX</strong>, <strong>ITX</strong>, <strong>Micro-ATX </strong>and <strong>SSI CEB</strong> motherboards. This standard is ideal for servers and workstations based on Intel Xeon and AMD Epyc processors (X399/C600 chipsets). This approach provides a wide range of component choices and allows you to create configurations from basic <strong>servers</strong> to advanced systems for special tasks. As a result, the chassis can easily find its way both in a corporate environment and in a more private application within a home network.</p> </div> </div> </div> </section> <section class="pd"> <div class=" pb-30 pt-30"> <div class="product-description-center"><img src="https://web.impakt.com.pl/opisy/3rzftxob0kbod9cnjsnuvg5s.jpg" alt="Black ATX server chassis by Lanberg, featuring a ventilation design and front ports for USB and power indicators" /></div> <div style="padding-top: 40px;"> <h2 class="product-description-center" style="color: #000!important;" data-class="h2">Impressive cooling: 3 powerful 80 mm PWM fans</h2> <div class="product-description-text product-description-text--with-padding product-description-center" style="color: #000!important;"> <p style="text-align: justify;">Good cooling and free airflow are key features for the proper operation of components. The SC01-5202-12B relies on compact but efficient cooling. <strong>The server case</strong> is equipped with <strong>3 PWM 80 mm fans</strong> with adjustable speed (900-2600 RPM) and low noise level (26.1 dB). Thanks to a perforated front with a replaceable dust filter, air flows freely through the interior, ensuring optimal working conditions in a server room or <strong>RACK</strong> cabinet.</p> </div> </div> </div> </section> <section class="pd"> <div class=""> <div class="product-description-center"><img src="https://web.impakt.com.pl/opisy/bjie79nqjx9rggq86bcfblgm.jpg" alt="ATX server chassis with a 2U design, featuring metal construction and front panel connections. Ideal for mounting in 19-inch racks" /></div> <div style="padding-top: 40px;"> <h2 class="product-description-center" style="color: #000!important;" data-class="h2">Easy expansion with space for multiple hard drives and SSDs</h2> <div class="product-description-text product-description-text--with-padding product-description-center" style="color: #000!important;"> <p style="text-align: justify;">This model, when properly configured, provides space for<strong> 4 2.5" drives</strong> and <strong>6 3.5" drives,</strong> which gives you the possibility to create a really large storage space. Thus, <strong>the</strong> SC01-5202-12B <strong>server </strong>case allows you to easily expand the disk configuration without modifying the entire system. For users focusing on scalability and time saving, such a solution proves to be extremely practical.</p> </div> </div> </div> </section> <section class="pd"> <div class=""> <div class="product-description-center"><img src="https://web.impakt.com.pl/opisy/34hmfiwg1ouagoz1v26uy1kb.jpg" alt="ATX server case from Lanberg, 19-inch, 2U size, featuring a sleek metal design and ventilation openings" /></div> <div style="padding-top: 40px;"> <h2 class="product-description-center" style="color: #000!important;" data-class="h2">Solidly constructed server case: <br />durability and resistance to damage</h2> <div class="product-description-text product-description-text--with-padding product-description-center" style="color: #000!important;"> <p style="text-align: justify;">Each Lanberg <strong>server case </strong>is made of galvanized steel with a thickness of as much as 1.2 mm, which significantly increases its resistance to mechanical damage. Compared to traditional solutions such as home <strong>tower server cases </strong>or the less well-made some <strong>ATX server cases</strong>, our <strong>RACK </strong>cabinet models stand out for their extra structural rigidity. This translates into years of reliability in the operation of any server. As a result, you can rest assured that your investment will bring you long-lasting benefits and remain stable even under heavy loads.</p> </div> </div> </div> </section> <section class="pd"> <div class=""> <div class="product-description-center"><img src="https://web.impakt.com.pl/opisy/u6k03k7tsbd243kmk51jo97t.jpg" alt="ATX server case with a metallic finish, featuring front ports and handles for easy installation in a 2U rack" /></div> <div style="padding-top: 40px;"> <h2 class="product-description-center" style="color: #000!important;" data-class="h2">Connect multiple components to a rich I/O panel</h2> <div class="product-description-text product-description-text--with-padding product-description-center" style="color: #000!important;"> <p style="text-align: justify;"><strong>A server</strong> and <strong>a server case </strong>are a duo that requires quick access to the most important ports. That's why you'll find 2 <strong>USB</strong> 3.0 Type-A ports on the front panel of our <strong>RACK</strong> models, as well as Power and Reset buttons. This makes server management convenient and intuitive, whether you're working in a professional server room or as part of an extended setup in a small or medium-sized business.</p> </div> </div> </div> </section> <section class="pd"> <div class=""> <div class="product-description-center"><img src="https://web.impakt.com.pl/opisy/9lwsnqt3sbxgat54j1cmu8ys.jpg" alt="Metal server chassis components and a cable connector for the LANBERG ATX 520/12 19"/2U system" /></div> <div style="padding-top: 40px;"> <h2 class="product-description-center" style="color: #000!important;" data-class="h2">Dedicated accessories for suitable power supply <br />and mounting in 19" RACK cabinets</h2> <div class="product-description-text product-description-text--with-padding product-description-center" style="color: #000!important;"> <p style="text-align: justify;">Lanberg <strong>cases </strong>in this series offer a set of additional accessories: adapters for ATX, SFX and Flex ATX 1U power supplies, 1x PWM splitter and key lock. With these, you can easily mount the <strong>server</strong> in a 19" <strong>rack</strong> and customize the power supply. The complete accessory package means that even less experienced users can quickly get their server up and running.</p> </div> </div> </div> </section> <section class="pd"> <div class=""> <div style="padding-top: 40px;"> <h2 class="product-description-center" style="color: #000!important;" data-class="h2">Meet the SC01-5202-12B in action!</h2> <div class="product-description-text product-description-text--with-padding product-description-center" style="color: #000!important;"> <p><iframe title="Advanced Lanberg RACK 19" 4U server case SC01-5202-12B" src="https://www.youtube.com/embed/cZjEs12NAjU" width="1120" height="630" frameborder="0" allowfullscreen="allowfullscreen" data-mce-fragment="1"></iframe></p> </div> </div> </div> </section> <section class="pd pb-0"> <div class=""> <div class="product-description-center"><img src="https://web.impakt.com.pl/opisy/zaz1q5pb6q2afzncbtv5gg84.jpg" alt="Silver LANBERG ATX server case in a 2U rackmount design, featuring front ventilation and handle for easy installation" /></div> </div> </section> <section class="pd pb-0"> <div class=""> <div class="product-description-center"><img src="https://web.impakt.com.pl/opisy/40du3n6bl45j3ott3khaad0p.png" alt="Lanberg 19" 4U wall-mounted rack, black, size 600x450, designed for organized installation of equipment" /></div> </div> </section> </div> </div> <div class="product__attributes" id="specification"> <div class="accordion" id="accordionExample"> <div class="card bg-transparent"> <div class="card-header px-0 bg-transparent" id="headingOne"> <h2 class="mb-0 position-relative"> </h2> </div> </div> </div> </div> <div class="collapse show" id="collapseOne" aria-labelledby="headingOne" data-parent="#accordionExample"> <div class="card-body bg-white p-0"> <div class="product__attributes-list"> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">ICT height</div> <div class="col-6 s1 font-w-700 py-2">2 U</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Motherboard form factor</div> <div class="col-6 s1 font-w-700 py-2">ATX, ITX, Micro-ATX, SSI CEB</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Size</div> <div class="col-6 s1 font-w-700 py-2">19"</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Number of installed fans</div> <div class="col-6 s1 font-w-700 py-2">3</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Start-Up Voltage</div> <div class="col-6 s1 font-w-700 py-2">3x 80 mm PWM</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Rotational speed</div> <div class="col-6 s1 font-w-700 py-2">900 - 2600 RPM</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Fan lifetime</div> <div class="col-6 s1 font-w-700 py-2">50000 h</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Maximum CPU cooling height</div> <div class="col-6 s1 font-w-700 py-2">72 mm</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Fan controller</div> <div class="col-6 s1 font-w-700 py-2">PWM</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Fan noise level</div> <div class="col-6 s1 font-w-700 py-2">26.10 dB</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Number of 2.5" drive bays (SSD/HDD)</div> <div class="col-6 s1 font-w-700 py-2">4</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Number of 3.5" drive bays (SSD/HDD)</div> <div class="col-6 s1 font-w-700 py-2">6</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Number of expansion slots</div> <div class="col-6 s1 font-w-700 py-2">7</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Compatible power supply standard</div> <div class="col-6 s1 font-w-700 py-2">ATX, FLEX, SFX</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Power supply included</div> <div class="col-6 s1 font-w-700 py-2">No</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Connectors</div> <div class="col-6 s1 font-w-700 py-2">USB 3.0 Type-A</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">I/O panel</div> <div class="col-6 s1 font-w-700 py-2">Power & Reset button, USB 3.0 Typ-A x2</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Hot-swap</div> <div class="col-6 s1 font-w-700 py-2">No</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Work signal</div> <div class="col-6 s1 font-w-700 py-2">LED</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Material</div> <div class="col-6 s1 font-w-700 py-2">Galvanized steel, Steel</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Colour</div> <div class="col-6 s1 font-w-700 py-2">Black</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Environment humidity</div> <div class="col-6 s1 font-w-700 py-2">35 - 85 %</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Working depth</div> <div class="col-6 s1 font-w-700 py-2">520 mm</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Upper & lower panel thickness</div> <div class="col-6 s1 font-w-700 py-2">1.2 mm</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Side panel thickness</div> <div class="col-6 s1 font-w-700 py-2">1.2 mm</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Other elements sheet thickness</div> <div class="col-6 s1 font-w-700 py-2">1.2 mm</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Length</div> <div class="col-6 s1 font-w-700 py-2">520 mm</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Width</div> <div class="col-6 s1 font-w-700 py-2">430 mm</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Height</div> <div class="col-6 s1 font-w-700 py-2">89 mm</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Weight</div> <div class="col-6 s1 font-w-700 py-2">7.5 kg</div> </div> <div class="row product__attributes-list-item"> <div class="col-6 s1 font-w-300 py-2 text-right">Included Accessories</div> <div class="col-6 s1 font-w-700 py-2">1U custom power supply mounting adapter (100mm wide), ATX, SFX power supply mounting adapter, Flex ATX power supply mounting adapter, Flex ATX power supply rear mounting bracket, PWM 4-PIN fan splitter, Replaceable front dust filter</div> </div> </div> </div> </div>

RACK 19" 4U server cases from Lanberg Our 19" RACK server cases are an excellent choice for both professional data centers and advanced individual users. This 4U enclosure is designed to meet the most demanding needs in server construction and operation, while having a real impact on the performance of the entire system. Thanks to its well-thought-out design, it will excel in business and industrial environments where reliability, flexibility and efficient airflow are important. The new series are advanced server enclosures with a variety of fan configurations and mounting space, allowing you to expand your hardware capabilities even more easily. These enclosures are distinguished by their robust construction, space for numerous storage media, and rich I/O panels for quick connection of devices via USB 3.0 ports. Importantly, our models support a variety of motherboard standards, and practical accessories are included for easy installation. As a result, each server can be configured optimally for server operation and flexibly adapted to changing needs. Supported ATX, ITX, Micro-ATX and SSI EEB motherboardsThe SC01-5204-12B server case is compatible with ATX, ITX, Micro-ATX and SSI EEB motherboards. This standard is ideal for high-performance servers and workstations based on Intel Xeon and AMD Epyc processors (X399/C600 chipsets). It provides a wide range of possibilities for component selection and scaling of computing power, allowing you to create diverse configurations: from basic servers to advanced systems in data centers, large networks and industrial applications. Thoughtful design and ample space make server expansion simple and cost-effective in the long term. Advanced cooling: 5 PWM 120 mm fansGood cooling and free airflow are key features for the proper operation of components. To ensure optimal operating temperatures for high-performance components, the SC01-5204-12B server case is equipped with up to 5 large 120 mm PWM fans with adjustable speed (600-1500 RPM) and low noise level (33 dB).In addition, 2x additional 80×80 mm fans can be mounted on the rear wall of the case. Thanks to the perforated front with replaceable dust filter, air flows freely through the interior, ensuring optimal working conditions in a server room or RACK cabinet. Easy expansion with space for multiple hard drives and SSDsThe design provides space for 3 2.5" drives and as many as 10 3.5" drives when properly configured, giving you the ability to create massive storage space. With access to the 3.5" drive bays without having to unscrew the top cover, the SC01-5204-12B server case allows you to easily expand your disk configuration without having to disassemble or modify the entire system. For users focused on scalability and time saving, such a solution is extremely practical and convenient. Solidly constructed server enclosures: durability and resistance to damageEach Lanberg server case is made of galvanized steel with a thickness of as much as 1.2 mm, which significantly increases its resistance to mechanical damage. Compared to traditional solutions such as home tower server cases or the less well-made some ATX server cases, our RACK cabinet models stand out for their extra structural rigidity. This translates into years of reliability in the operation of any server. As a result, you can rest assured that your investment will bring you long-lasting benefits and remain stable even under heavy loads. Connect multiple components to a rich I/O panelA server and a server case are a duo that requires quick access to the most important ports. That's why you'll find 2 USB 3.0 Type-A ports on the front panel of our RACK models, as well as Power and Reset buttons. This makes server management convenient and intuitive, whether you're working in a professional server room or as part of an extended setup in a small or medium-sized business. Dedicated accessories for suitable power supply and mounting in 19" RACK cabinetsLanberg server cases in this series offer a rich set of accessories: 1x SFX power supply adapter, 2x PWM splitters, two 5x SATA power splitters and a key lock. With these, you can easily mount the server in a 19" rack and customize the power supply. The complete accessory package means that even less experienced users can quickly get their server up and running.

19" 1U RACK server cases from Lanberg Lanberg is launching a new family of RACK 19" 1U server cases, which can be easily used in a production server room, company office, semi-professional workshop, and even in a home NAS system or hobbyist's laboratory. Each case has been designed so that customers can configure a server to suit their exact needs - from a miniature cluster based on Mini-ITX 19 to powerful, multi-processor configurations. As a result, a single product line offers solutions for both the PRO segment and the consumer market, and server cases for RACK cabinets are now available to everyone. The flat 1U height allows for installation in compact, including hanging, 19" RACK cabinets, which saves space in the office, home, or garage. Lanberg opted for a flat design, but did not compromise: all models offer broad compatibility with various motherboard standards, from Mini-ITX to E-ATX and SSI EEB. An airy front, adjustable PWM fans, numerous slots for hard drives and SSDs, solid 1.0 mm galvanized steel, a rich I/O panel, and a package of useful accessories - these are the elements that unite all Lanberg 1U RACK cases into one coherent family. Supported motherboards: ATX, Micro-ATX, Mini-ITX, and SSI CEBThe SC01-4201-10B model is the golden mean - a 1U 19" RACK server case that combines a compact format with enormous flexibility. A wide selection of motherboards allows you to choose a configuration for a specific system - from a virtualization server to a multi-disk NAS. The presented model supports compact Mini-ITX and Micro-ATX motherboards, as well as full-size ATX and specialized SSI CEB server motherboards, allowing for much greater configuration freedom. However, the 1U height requires careful selection of CPU cooling: low TDP processors or passive cooling and short, efficient heat sinks are recommended to avoid thermal throttling and maintain a stable operating temperature. Effective cooling - 4 powerful 40 mm PWM fansThe SC01-4201-10B uses four 40 mm PWM fans with a range of 4000-8000 RPM, a noise level of only 24 dB, and an impressive service life of 50,000 hours. These parameters ensure quiet and efficient system operation for a long time. The perforated front and intelligent PWM control ensure constant airflow, maintaining a stable temperature for both data storage devices and the motherboard. This means that even in continuous operation mode, the server remains cool, stable, and ready for action without the risk of overheating components. Easy expansion thanks to space for 2 x 3.5" HDDs or 2 x 2.5" SSDsThe SC01-4201-10B provides 2 drive bays by default - depending on your needs, you can install 2 high-capacity 3.5" HDDs or 2 fast 2.5" SSDs. This solution allows you to create high-capacity RAID arrays and flexibly combine different types of storage - from fast system drives to platter-based archival drives. What's more, by using shorter FLEX power supply models, it is possible to gain space for an additional 2.5" SSD, which gives even greater configuration freedom and allows you to increase the total capacity of the system without sacrificing the compact 1U form factor. This allows users to easily tailor the drive layout to their own scenarios - from a simple file server to a multi-tasking office server. Robustly constructed server cases: durability and damage resistanceEach Lanberg RACK 1U server case is made of 1.0 mm thick galvanized steel, which significantly exceeds the industry standard and distinguishes it from competing solutions. The greater thickness of the material translates into higher mechanical resistance - the chassis effectively protects components from deformation, accidental impacts, and micro-vibrations, which in the long term could affect the stability of the server. The robust design is also less susceptible to wear and tear during many years of operation, frequent assembly and disassembly in RACK cabinets, or transport between locations. As a result, the device not only protects components from external factors such as dust or shocks, but also ensures the durability and reliability of the server infrastructure for many years of intensive use. Connect multiple components to a rich I/O panelThe front panel of the case features two USB 3.0 Type-A ports and Power and Reset buttons, making it extremely convenient to quickly connect a flash drive, external drive, or service keyboard. The front I/O panel saves the administrator time and facilitates system configuration, firmware updates, and diagnostics-without having to reach behind the case or manipulate cables in hard-to-reach places. It is a simple yet extremely practical solution that speeds up server operation and maintenance. Dedicated accessories for the appropriate power supply and installation in 19" RACK cabinetsSC01-4201-10B includes a 4-PIN PWM splitter for connecting several fans and precise control of their operation, a set of M6 screws for stable mounting in a standard RACK cabinet, a replaceable front dust filter that protects the interior from dirt, and FLEX power supply brackets up to 220 mm long, which ensure compatibility with a wide range of power supply units. This equipment eliminates the need to purchase additional accessories and allows for efficient, safe installation of the entire server in a matter of minutes. Thanks to this family of RACK 19" 1U server cases from Lanberg, every company, home enthusiast, or professional server room can build a stable, cooled, and efficient tailor-made system from a simple NAS to an advanced computing station. Everything is available immediately from Lanberg's online stores and brick-and-mortar retail partners.

19" 1U RACK server cases from Lanberg Lanberg is launching a new family of RACK 19" 1U server cases, which can be easily used in a production server room, company office, semi-professional workshop, and even in a home NAS system or hobbyist's laboratory. Each case has been designed so that customers can configure a server to suit their exact needs - from a miniature cluster based on Mini-ITX 19 to powerful, multi-processor configurations. As a result, a single product line offers solutions for both the PRO segment and the consumer market, and server cases for RACK cabinets are now available to everyone. The flat 1U height allows for installation in compact, including hanging, 19" RACK cabinets, which saves space in the office, home, or garage. Lanberg opted for a flat design, but did not compromise: all models offer broad compatibility with various motherboard standards, from Mini-ITX to E-ATX and SSI EEB. An airy front, adjustable PWM fans, numerous slots for hard drives and SSDs, solid 1.2 mm galvanized steel, a rich I/O panel, and a package of useful accessories - these are the elements that unite all Lanberg 1U RACK cases into one coherent family. Supported motherboards: E-ATX, ATX, Micro-ATX, Mini-ITX, SSI CEB, SSI EEBFor the most demanding users, Lanberg has prepared the SC01-6501-12B model - one of the few 1U RACK enclosures capable of accommodating E-ATX and SSI EEB boards and several PCI expansion cards. This is an option for enthusiasts who want to build a server with high computing power while maintaining a minimum height of 1U. As with other 1U models, the choice of processor and cooling should be considered in terms of limited space and operating temperature optimization. Advanced cooling - 8 x 40 mm PWM fansThe top-of-the-line 1U SC01-6501-12B model features 8 x 40 mm PWM fans (with the option to install two additional fans on the rear panel of the chassis) that maintain high airflow. Speed control in the range of 4000-8000 RPM and a maximum noise level of 24 dB allow for low noise levels while effectively cooling high-power components even under prolonged load. Easy expansion thanks to space for multiple hard drives and SSDsThe SC01-6501-12B in its standard configuration offers 4 drive bays - users can choose to install 4 high-capacity 3.5" HDDs or 4 fast 2.5" SSDs. This provides a solid foundation for creating a large RAID array or a flexible combination of storage devices for various purposes. Importantly, thanks to the use of a suitably short FLEX power supply, it is possible to add another 2.5" SSD drive, which increases the total storage space without interfering with the compact design of the case. An additional advantage is the possibility of installing one more SSD drive if the user chooses a smaller motherboard - Micro-ATX or Mini-ITX - which frees up additional space inside the case. As a result, the SC01-6501-12B allows for the installation of up to 6 storage devices, providing tremendous flexibility when building advanced file servers, complex NAS systems, or virtualization environments. Robustly constructed server cases: durability and damage resistanceEach Lanberg RACK 1U server case is made of 1.2 mm thick galvanized steel, which significantly exceeds the industry standard and distinguishes it from competing solutions. The greater thickness of the material translates into higher mechanical resistance - the chassis effectively protects components from deformation, accidental impacts, and micro-vibrations, which in the long term could affect the stability of the server. The robust design is also less susceptible to wear and tear during many years of operation, frequent assembly and disassembly in RACK cabinets, or transport between locations. As a result, the device not only protects components from external factors such as dust or shocks, but also ensures the durability and reliability of the server infrastructure for many years of intensive use. Connect multiple components to a rich I/O panelThe front panel of the case features two USB 3.0 Type-A ports and Power and Reset buttons, making it extremely convenient to quickly connect a flash drive, external drive, or service keyboard. The front I/O panel saves the administrator time and facilitates system configuration, firmware updates, and diagnostics-without having to reach behind the case or manipulate cables in hard-to-reach places. It is a simple yet extremely practical solution that speeds up server operation and maintenance. Dedicated accessories for the appropriate power supply and installation in 19" RACK cabinetsThe SC01-6501-12B is a truly complete kit, providing users with everything they need for quick and stable installation. The box contains two 4-PIN PWM splitters, allowing you to connect multiple fans and conveniently manage their speed, a set of sturdy M6 screws for secure mounting in a RACK cabinet, and a replaceable dust filter that protects the interior of the case from contamination and extends the life of the components. The set is complemented by a special bracket that allows the installation of a FLEX power supply with a length of up to 330 mm - this allows the use of powerful, high-efficiency units capable of handling the most demanding dual-CPU configurations with multiple drives and expansion cards. This set of accessories gives you complete freedom in building your server and eliminates the need to purchase additional components, which will be appreciated by both professionals and advanced enthusiasts. Dzięki tej rodzinie obudów serwerowych RACK 19" 1U od Lanberga każda firma, domowy entuzjasta czy profesjonalna serwerownia zbuduje stabilny, chłodzony i wydajny system skrojony na miarę - od prostego NAS-a po zaawansowaną stację obliczeniową. Wszystko dostępne od ręki sklepach internetowych i stacjonarnych partnerów handlowych Lanberg.

RACK 19" 2U server cases from LanbergOur 19" RACK server chassis is an excellent choice for both professional data centers and advanced individual users. This 2U enclosure is designed to meet the most demanding needs in server construction and operation, while having a real impact on the performance of the entire system. Thanks to its well-thought-out design, it will excel in business and industrial environments where reliability, flexibility and efficient airflow are important. The new series are advanced server enclosures with a variety of fan configurations and mounting space, allowing you to expand your hardware capabilities even more easily. These enclosures are distinguished by their robust construction, space for numerous storage media, and rich I/O panels for quick connection of devices via USB 3.0 ports. Importantly, our models support a variety of motherboard standards, and practical accessories are included for easy installation. As a result, each server can be configured optimally for server operation and flexibly adapted to changing needs. ATX, E-ATX, ITX, Micro-ATX and SSI CEB motherboards supportedThe SC01-6502-12B server case is compatible with E-ATX, ATX, ITX, Micro-ATX and SSI CEB motherboards. This standard is ideal for high-performance servers and workstations based on Intel Xeon and AMD Epyc processors (X399/C600 chipsets). It provides a wide range of possibilities for component selection and scaling of computing power, allowing the creation of diverse configurations: from basic servers to advanced systems in data centers, large networks and industrial applications. Advanced cooling: 7 PWM 80 mm fansGood cooling and free airflow are key features for the proper operation of components. To ensure optimal operating temperatures for high-performance components, the SC01-6502-12B server chassis is equipped with up to 7 high-performance 80 mm PWM fans with adjustable speed (900-2600 RPM). At maximum speed, they maintain a service life of up to 50,000 hours and generate a noise level of 26.1 dB. Thanks to the perforated front with a replaceable dust filter, air flows freely through the interior, ensuring optimal operating conditions in a server room or RACK cabinet. Easy expansion with space for multiple hard drives and SSDsThe design provides, when properly configured, space for 4 2.5" drives and as many as 6 3.5" drives to create a large storage space. This configuration allows you to easily store and segregate large volumes of data, which will be appreciated especially by companies growing at a rapid pace. Solidly constructed server enclosures: durability and resistance to damageEach Lanberg server case is made of galvanized steel as thick as 1.2 mm, which definitely increases its resistance to mechanical damage. Compared to traditional solutions, such as home tower server enclosures or the less well-made some ATX server enclosures, our RACK enclosure models stand out for their additional structural rigidity. This translates into years of reliability in the operation of any server. As a result, you can rest assured that your investment will bring you long-lasting benefits and remain stable even under heavy loads. Connect multiple components to a rich I/O panelA server and a server case are a duo that requires quick access to the most important ports. That's why you'll find 2 USB 3.0 Type-A ports on the front panel of our RACK models, as well as Power and Reset buttons. This makes server management convenient and intuitive, whether you're working in a professional server room or as part of an extended setup in a small or medium-sized business. Dedicated accessories for suitable power supply and mounting in 19" RACK cabinetsLanberg server cases in this series offer a rich set of accessories: interchangeable adapters for Flex ATX, ATX, SFX power supplies, 2x PWM splitters and a key lock. With these, you can easily mount the server in a 19" RACK rack and customize the power supply. The complete accessory package means that even less experienced users can quickly get their server up and running.