Watercool Heatkiller V eBC - Backplate for RTX 3080/3090 EVGA FTW3 - Black
Tootekood: 16078GPU Waterblocks
<div class="desc"><p><span style="font-size: small;">The HEATKILLER® V eBC backplate is a useful addition to the graphics card coolers of the HEATKILLER® V series. Mounted on the back of the graphics card, it improves cooling performance and mechanical stability. This is made possible by the use of solid black anodized aluminum. The milled logos and indirect lighting are also eye-catchers.</span><br><br> <span style="font-size: small;">The backplate cools relevant components on the back of the board, including the GPU and voltage converter (VRM). Pre-cut thermal pads are included in the delivery.</span></p><p> <span style="font-size: small;">Spacers (electrically insulating) attached to the back of the backplate ensure easy installation on the graphics card. The included mounting material is optimized for use with a water cooler from the HEATKILLER® V series.</span></p><p> <strong><span style="font-size: small;">Technical data:</span></strong></p><ul><li> <span style="font-size: small;">Material: anodized aluminum</span></li><li> <span style="font-size: small;">Dimensions: (L x W x H):</span></li><li> <span style="font-size: small;">Weight: 150g</span></li></ul><p> <span style="font-size: small;"><strong>Compatibility:</strong></span></p><ul><li> <span style="font-size: small;">EVGA GeForce RTX 3080 FTW3</span></li><li> <span style="font-size: small;">EVGA GeForce RTX 3080Ti FTW3</span></li><li> <span style="font-size: small;">EVGA GeForce RTX 3090 FTW3</span></li><li> <span style="font-size: small;">See also <a href="http://gpu.watercool.de/">http://gpu.watercool.de</a> for further information</span></li></ul><p> <span style="font-size: small;"><strong>Scope of delivery:</strong></span></p><ul><li> <span style="font-size: small;">1x HEATKILLER® V eBC - Backplate for RTX 3080/3090 EVGA FTW3 - Black</span></li><li> <span style="font-size: small;">1x mounting material</span></li></ul></div>
Watercool Heatkiller V eBC Backplate für RTX 3080/3090 - Nickel
Tootekood: 16073GPU Waterblocks
<p>The HEATKILLER® V eBC backplate is a useful addition to the graphics card cooler of the HEATKILLER® V series. Mounted on the back of the graphics card, it improves cooling performance and increases mechanical stability. This is made possible by the use of solid black anodized aluminum. The optics are not neglected either.</p> <p>The backplate cools relevant components on the back of the board, including the GPU and voltage converter (VRM). Pre-cut thermal pads are included in the scope of delivery.</p> <p>Spacers (electrically insulating) attached to the back of the backplate ensure problem-free installation on the graphics card.</p> <p>The enclosed mounting material is optimized for use with a water cooler from the HEATKILLER® V series.</p> <p><strong>Technical specifications:</strong></p> <ul> <li>Material: anodized aluminum</li> <li>Dimensions: (L x W x H):</li> <li>Weight: 150g</li> </ul> <p><strong>Compatible to:</strong></p> <ul> <li>NVIDIA Geforce RTX 3080</li> <li>NVIDIA Geforce RTX 3090</li> </ul> <p><strong>Scope of delivery:</strong></p> <ul> <li>1x HEATKILLER® V eBC - Backplate for RTX 3080/3090 - Black</li> <li>1x mounting material</li> </ul>
Watercool Heatkiller V eBC Backplate für RTX 3080/3090 - schwarz
Tootekood: 16072GPU Waterblocks
<p>The HEATKILLER® V eBC backplate is a useful addition to the graphics card cooler of the HEATKILLER® V series. Mounted on the back of the graphics card, it improves cooling performance and increases mechanical stability. This is made possible by the use of solid black anodized aluminum. The optics are not neglected either.</p> <p>The backplate cools relevant components on the back of the board, including the GPU and voltage converter (VRM). Pre-cut thermal pads are included in the scope of delivery.</p> <p>Spacers (electrically insulating) attached to the back of the backplate ensure problem-free installation on the graphics card.</p> <p>The enclosed mounting material is optimized for use with a water cooler from the HEATKILLER® V series.</p> <p><strong>Technical specifications:</strong></p> <ul> <li>Material: anodized aluminum</li> <li>Dimensions: (L x W x H):</li> <li>Weight: 150g</li> </ul> <p><strong>Compatibility:</strong></p> <ul> <li>Nvidia Geforce RTX 3080</li> <li>Nvidia Geforce RTX 3090</li> </ul> <p><strong>Scope of delivery:</strong></p> <ul> <li>1x HEATKILLER® V eBC - Backplate for RTX 3080/3090 - Black</li> <li>1x mounting material</li> </ul>
Watercool Heatkiller V für RTX 3080/3090 - Kupfer + Acryl, schwarz
Tootekood: 15641GPU Waterblocks
<p>With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible.</p> <p>With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation.</p> <p>The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board.</p> <p>In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher.</p> <p>Technical specifications:</p> <p>Base plate material: electrolyte copper</p> <p>Material cover: acrylic glass</p> <p>Cover material: black anodized aluminum</p> <p>Connection terminal material: Acetal</p> <p>Dimensions: (LxWxH): 230 x 119 x 21 mm</p> <p>Connection: 4x G ¼ inch (DIN ISO 228-1)</p> <p>Weight:</p> <p>Pressure tested: 2 bar</p> <p>Compatibility:</p> <p>Nvidia Geforce RTX 3080/3090</p> <p>Scope of delivery:</p> <p>1x HEATKILLER® V</p> <p>1x mounting material</p> <p>Thermal Grizzly Kryonaut thermal paste</p>
Watercool Heatkiller V für RTX 3080/3090 EVGA XC3, ARGB - Nickel + Acetal
Tootekood: 15651GPU Waterblocks
<p>With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible.</p> <p>With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation.</p> <p>The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board.</p> <p>In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. The integrated aRGB strips are now standard in combination with the nickel-acrylic variants. This means that the HEATKILLER® V can be perfectly integrated into the lighting concept of the computer.</p> <p><strong>Technical specifications:</strong></p> <ul> <li>Base plate material: nickel-plated electrolyte copper</li> <li>Material cover: acrylic glass</li> <li>Cover material: annealed stainless steel</li> <li>Connection terminal material: Acetal</li> <li>Dimensions: (LxWxH):</li> <li>Connection: 4x G ¼ inch (DIN ISO 228-1)</li> <li>Weight:</li> <li>Pressure tested: 2 bar</li> </ul> <p><strong>Compatibility:</strong></p> <ul> <li>EVGA Geforce RTX 3080 XC3</li> <li>EVGA Geforce RTX 3090 XC3</li> </ul> <p><strong>Scope of delivery:</strong></p> <ul> <li>1x HEATKILLER® V</li> <li>1x HEATKILLER® LED Strip aRGB</li> <li>1x mounting material</li> <li>Thermal Grizzly Kryonaut thermal paste</li> </ul>
Watercool Heatkiller V für RTX 3080/3090, ARGB - Nickel + Acryl
Tootekood: 15642GPU Waterblocks
<p>With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible.</p> <p>With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation.</p> <p>The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board.</p> <p>In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. The integrated aRGB strips are now standard in combination with the nickel-acrylic variants. This means that the HEATKILLER® V can be perfectly integrated into the lighting concept of the computer.</p> <p>Technical specifications:</p> <ul> <li>Base plate material: nickel-plated electrolyte copper</li> <li>Material cover: acrylic glass</li> <li>Cover material: annealed stainless steel</li> <li>Connection terminal material: Acetal</li> <li>Dimensions: (LxWxH): 230 x 119 x 21 mm</li> <li>Connection: 4x G ¼ inch (DIN ISO 228-1)</li> <li>Weight:</li> <li>Pressure tested: 2 bar</li> </ul> <p>Compatibility:</p> <ul> <li>Nvidia Geforce RTX 3080/3090</li> </ul> <p>Scope of delivery:</p> <ul> <li>1x HEATKILLER® V</li> <li>1x HEATKILLER® LED Strip aRGB</li> <li>1x mounting material</li> <li>Thermal Grizzly Kryonaut thermal paste</li> </ul>
Watercool Heatkiller V für RTX 30803090 - Kupfer + Acetal
Tootekood: 15644GPU Waterblocks
<p>With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible.</p> <p>With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation.</p> <p>The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board.</p> <p>In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher.</p> <p>Technical specifications:</p> <ul> <li>Base plate material: electrolyte copper</li> <li>Material cover: acetal</li> <li>Connection terminal material: Acetal</li> <li>Dimensions: (LxWxH): 230 x 119 x 21 mm</li> <li>Connection: 4x G ¼ inch (DIN ISO 228-1)</li> <li>Weight:</li> <li>Pressure tested: 2 bar</li> </ul> <p>Compatibility:</p> <ul> <li>Nvidia Geforce RTX 3080/3090</li> </ul> <p>Scope of delivery:</p> <ul> <li>1x HEATKILLER® V</li> <li>1x mounting material</li> <li>Thermal Grizzly Kryonaut thermal paste</li> </ul>
Watercool Heatkiller V für RTX 30803090 - Nickel + Acetal
Tootekood: 15645GPU Waterblocks
<p>With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible.</p> <p>With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation.</p> <p>The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board.</p> <p>In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher.</p> <p>Technical specifications:</p> <ul> <li>Base plate material: electrolyte copper</li> <li>Material cover: acetal</li> <li>Connection terminal material: Acetal</li> <li>Dimensions: (LxWxH): 230 x 119 x 21 mm</li> <li>Connection: 4x G ¼ inch (DIN ISO 228-1)</li> <li>Weight:</li> <li>Pressure tested: 2 bar</li> </ul> <p>Compatibility:</p> <ul> <li>Nvidia Geforce RTX 3080/3090</li> </ul> <p>Scope of delivery:</p> <ul> <li>1x HEATKILLER® V</li> <li>1x mounting material</li> <li>Thermal Grizzly Kryonaut thermal paste</li> </ul>
Watercool HEATKILLER® V eBC - Backplate for RTX 3080/3090 Zotac Trinity - Black
Tootekood: 16074GPU Waterblocks
<p>The HEATKILLER® V eBC backplate is a useful addition to the graphics card cooler of the HEATKILLER® V series. Mounted on the back of the graphics card, it improves cooling performance and increases mechanical stability. This is made possible by the use of solid black anodized aluminum. The optics are not neglected either.</p> <p>The backplate cools relevant components on the back of the board, including the GPU and voltage converter (VRM). Pre-cut thermal pads are included in the scope of delivery.</p> <p>Spacers (electrically insulating) attached to the back of the backplate ensure problem-free installation on the graphics card.</p> <p>The enclosed mounting material is optimized for use with a water cooler from the HEATKILLER® V series.</p> <p><strong>Technical specifications:</strong></p> <ul> <li>Material: anodized aluminum</li> <li>Dimensions: (L x W x H):</li> <li>Weight: 150g</li> </ul> <p><strong>Compatibility:</strong></p> <ul> <li>ZOTAC Geforce RTX 3080 Trinity</li> <li>ZOTAC Geforce RTX 3090 Trinity</li> </ul> <p><strong>Scope of delivery:</strong></p> <ul> <li>1x HEATKILLER® V eBC - Backplate for RTX 3080/3090 Zotac Trinity - Black</li> <li>1x mounting material</li> </ul>
<p>With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible.</p> <p>With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation.</p> <p>The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board.</p> <p>In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher.</p> <p>Technical specifications:</p> <ul> <li>Base plate material: electrolyte copper</li> <li>Material cover: acrylic glass</li> <li>Cover material: annealed stainless steel</li> <li>Connection terminal material: Acetal</li> <li>Dimensions: (LxWxH): 230 x 119 x 21 mm</li> <li>Connection: 4x G ¼ inch (DIN ISO 228-1)</li> <li>Weight:</li> <li>Pressure tested: 2 bar</li> </ul> <p> Compatibility:</p> <ul> <li>Nvidia Geforce RTX 3080/3090</li> </ul> <p> Scope of delivery:</p> <ul> <li>1x HEATKILLER® V</li> <li>1x mounting material</li> <li>Thermal Grizzly Kryonaut thermal paste</li> </ul>