The Alphacool Aurora Acryl GPX-A 6800(XT) Eisblock merges style with high performance and extensive digital RGB lighting. With over 16 years of experience, Alphacool has the expertise to design GPU waterblocks that stand for premium quality and outstanding performance. This perfectly describes the Aurora Acryl GPX Eisblock.More Performance!In developing the Eisblock Aurora GPX-A 6800(XT) GPU block, the goal was to further enhance performance. The first step was bringing the cooler closer to each component by reducing the thickness of the thermal pads to just 1 mm. The thickness of the nickel-plated copper block was also reduced—from 7 mm to only 5.5 mm. Additionally, the internal water flow was optimized, allowing all key components such as voltage regulators and memory to be cooled much more effectively. These improvements result in a substantial increase in cooling performance.New Design!The Eisblock Aurora GPX-A 6800(XT) cooler places greater emphasis on lighting than previous models. Addressable digital RGB LEDs are integrated directly into the cooling block and extend across its entire length, creating full illumination of the cooling block. No corner or edge is left in the dark thanks to the aRGB LEDs. The new design features more angular lines, with all edges beveled. These bevels improve light diffusion within the waterblock due to reflections and create various contours that give the Aurora GPX-A 6800(XT) Eisblock a unique identity.Copper or Aluminum?Alphacool uses copper exclusively in its water coolers. For the Aurora GPX-A 6800(XT) Eisblock, the copper is nickel-plated. Compared to earlier models, Alphacool has enhanced the nickel plating, greatly increasing acid resistance and thus minimizing the risk of nickel flaking. Why does Alphacool choose copper over aluminum? Quite simply, copper has nearly twice the thermal conductivity of aluminum, making it a clearly superior material for water cooling.Anything Else New?The Eisblock Aurora GPX-A 6800(XT) also features new patented stop fittings that sit flush with the terminal’s surface. The Alphacool logo is now positioned at the corner on the top, where it is fully illuminated. The front of the terminal displays the corresponding names of compatible graphics card types, which are also fully lit by digital LEDs. IN and OUT ports are now marked by small triangles, which are easily recognizable and perfectly match the overall aesthetics of the graphics card waterblock.The Alphacool Aurora GPX-A 6800(XT) Acryl is a complete redesign of previous Alphacool GPU waterblocks. No technical compromises were made, drawing on all of Alphacool’s technical expertise during its development and implementation.Note:- This product comes with a backplate. Technical data:L x W x H: 130 x 262.5 x 24.5 mmCooler material: Nickel-plated copperTop material: AcrylicCooling fin thickness: 0.6 mmThreads: 4x G1/4“Digital RGB power connector: 3-Pin 5V (0.5A) Graphics Card Configurator: Click here!List of Compatibility: AMD graphic cardsCompatibility list:- AMD Radeon 6800 Reference Design- AMD Radeon 6800 XT Reference Design- AMD Radeon 6900 XT Reference Design- AMD Radeon 6950 XT Reference DesignMore compatible models will be added to this list for this cooler. We are currently reviewing other PCB designs from various manufacturers!Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800/6800XT/6900XT Reference with BackplateDownload data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800/6800XT/6900XT Reference with Backplate
EK-Quantum Vector N+ RX 6800XT/6900XT is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for SAPPHIRE NITRO+ 6800XT and 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector N+ RX 6800XT/6900XT water block for SAPPHIRE NITRO+ GAMING RX 6800 XT and 6900 XT GPUsEK-Quantum Vector N+ RX 6800XT/6900XT water block is compatible with SAPPHIRE NITRO Radeon RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of durable black POM Acetal. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum N+ Vector RX 6800XT/6900XT D-RGB water blockThe aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 9 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the N+ 6800XT/6900XT water blockEK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 285x149x16.5mm Enclosed EK-Quantum Vector N+ RX 6800XT/6900XT series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
EK-Quantum Vector Strix RX 6800/6900 is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for ROG Strix RX 6800, 6800XT, 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector Strix RX 6800/6900 water block for ROG Strix GAMING RX 6800 and 6900 GPUsEK-Quantum Vector RX 6800/6900 water block is compatible with ASUS® ROG Strix GAMING Radeon RX 6800, RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of durable black POM acetal. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Vector Strix RX 6800/6900 D-RGB water blockThe aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 9 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the Strix 6800/6900 water blockEK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 300.5x157x19.5mm Enclosed EK-Quantum Vector Strix RX 6800/6900 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
EK-Quantum Vector Strix RX 6800/6900 is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for ROG Strix RX 6800, 6800XT, 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector Strix RX 6800/6900 water block for ROG Strix GAMING RX 6800 and 6900 GPUsEK-Quantum Vector RX 6800/6900 water block is compatible with ASUS® ROG Strix GAMING Radeon RX 6800, RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Vector Strix RX 6800/6900 D-RGB water blockThe aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 9 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the Strix 6800/6900 water blockEK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 300.5x157x19.5mm Enclosed EK-Quantum Vector Strix RX 6800/6900 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
With the HEATKILLER®V for AMD Radeon RX6800/6900XT we are continuing the current HEATKILLER V generation with extensive optimizations. The full-cover water block draws on over 20 years of know-how in the development and production of high-performance water coolers. Equipped with unique highlights, the latest version of the HEATKILLER® V presents what is technically feasible. Significant improvements over the predecessor: Dual layer inflow Refined, vertical cooling structure Increased flow Symmetrical cooling design Screwless cover HEATKILLER High-Luminous aRGB as standard Insulating spacers made of high-performance plastic (Peek) CNC cut thermal pads Kryonaut thermal paste By increasing the number and specially arranged cooling fins, we were able to massively increase the cooling performance directly above the graphics processor and thus improve the most important area. The cooler base, milled from a solid copper block, establishes contact with all relevant components. The pioneering dual-layer inflow distributes the water simultaneously on two levels. This ensures an inflow that is at least 30 percent higher than with our previous generation. The wide and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling performance but also the flow rate of the HEATKILLER® V. Thanks to newly designed spacers made of high-performance plastic (PEEK), the solid copper block is insulated from the circuit board as best as possible. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was made from a single piece. The symmetrical channels further underline the look of the cooler and make it a unique element in every mod. The integrated high-luminous aRGB LED strips are now also standard in combination with the nickel-acrylic variants. This means that the HEATKILLER® V can be perfectly integrated into the computer's lighting concept. For the best possible look, the optionally available backplate is highly recommended. The unique manufacturing process conceals all electronic components without sacrificing illumination. The block in combination with the backplate makes the HEATKILLER®V for the current AMD graphics card generation look like a single unit and presents the legendary cooler in a completely new light. The legendary Kryonaut thermal paste from Thermal Grizzly ensures the best possible contact with the processor. The thermal pads, pre-cut by a CNC machine, ensure exceptional cooling of the voltage converters. This also makes installation easy, as the pads can be removed without leaving any residue. Planned modifications: Vertical connection terminal (Plexiglas®GS, Acetal) We only use selected materials from well-known manufacturers such as EVONIK, whose original Plexiglas® GS we use. Even the metals such as the high-purity copper come from renowned brand manufacturers. Production is carried out with the utmost care on our state-of-the-art CNC machinery in Waren. Many work steps are carried out by hand and each product is completed according to the four-eyes principle. Technical data: Base plate material: electrolytic copper Lid material: Acetal Material connection terminal: Acetal Dimensions: (LxWxH): 270 x 128 (incl. terminal) x 28.5mm (incl. backplate) Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: 1.2kg Pressure tested: 2 bar Compatibility: AMD Radeon RX 6800, 6800XT 6900XT in reference layout Scope of delivery: 1x HEATKILLER® V 1x mounting material Thermal Grizzly Kryonaut thermal paste
