<p style="text-align: justify;">The next generation - the Alphacool Eisblock Aurora water cooler for Radeon RX 7XXX graphics cards. In order to dissipate the enormous heat of this graphics card generation in the best possible way, numerous optimizations have been made to the water cooler compared to the previous model. The fin structure was adapted and enables a very good water flow while increasing the cooling surface. The modified jet plate with improved inflow engine ensures an optimal distribution of the water on the cooling fins.<br /><br /><b>Technical Highlights</b><br />The fin structure of this Eisblock cooler generation was developed together with AMD board partners. The fin thickness is 0.4 mm, the distance between the cooling fins is 0.4 mm. This ensures a very good water flow while increasing the cooling surface. The jet plate has a revised inlay that spreads the water pressure better over the fins thus optimizing the heat absorption. The adjusted water inflow gives the water a better angle of inflow.<br /><br /><b>Chrome-plated copper</b><br />The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.<br /><br /><b>Design</b><br />The Aurora design of the Radeon RX 7XXX Eisblock generation is visually calmer and simpler. Only one O-ring runs around the entire cooler. The design around the cooling fins and jetplate makes for a cleaner look. The illumination of the digitally addressable RGB LEDs is even better distributed throughout the cooler as a result of the chrome plating. The terminal's design is in line with the classic Aurora design.<br /><br /><b>Thermal paste & thermal pads</b><br />The included thermal compound is Alphacool's Subzero. With a thermal conductivity of 16 W/mK, it is one of the highest performing thermal pastes on the market. The electrically non-conductive thermal compund is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850.000 TF. Alphacool Soft Pads with 1mm thickness are used on the voltage converter and the graphics memory. The thermal conductivity of the pads is 7 W/mK. The pads for the back of the PCB are 3mm thick and have a thermal conductivity of 3 W/mK.<p> </p><b>Compatibility:</b><br>- PowerColor Radeon RX 7900 XTX Red Devil Limited Edition, 24GB GDDR6, HDMI, 3x DP (RX 7900 XTX 24G-E/OC/LIMITED)<br>- PowerColor Radeon RX 7900 XTX Red Devil, 24GB GDDR6, HDMI, 3x DP (RX 7900 XTX 24G-E/OC)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>285,50 x 144,50 x 34,20mm</td></tr><tr><td>Material cooler</td><td>chrome-plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>4 x G1/4"</td></tr><tr><td>Thickness cooling fins</td><td>0,4mm</td></tr><tr><td>Distance cooling fins</td><td>0,4mm</td></tr><tr><td>Illumination</td><td>digital aRGB LEDs</td></tr><tr><td>Power connector digital aRGB LEDs</td><td>3-Pin JST</td></tr><tr><td>Power digital aRGB LEDs</td><td>5V</td></tr><tr><td>Number of digital aRGB LEDs</td><td>15</td></tr><tr><td>Color</td><td>transparent</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data backplate</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>285,50 x 120,00 x 6mm</td></tr><tr><td>Material</td><td>aluminium</td></tr><tr><td>Color</td><td>black</td></tr></table><br></p>
Full-Block-Wasserkühler von Alphacool, für AMD Radeon RX 7900 XT/XTX Grafikkarten im Taichi/Phantom-Design, verchromter Kupferkühlkörper, mit Backplate
<p style="text-align: justify;">Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.<br /><br />The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.<br /><br />The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.<br /><br />The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances.<p> </p><b>Compatibility:</b><br>- AMD Radeon RX 7900 XTX, 24GB GDDR6<br>- ASRock Radeon RX 7900 XTX, 24GB GDDR6<br>- Asus Radeon RX 7900 XTX, RX7900XTX-24G, 24GB GDDR6 (90YV0IT0-U0NM00)<br>- Biostar Radeon RX 7900 XTX, 24GB GDDR6 (VA7906AEF4)<br>- Gigabyte Radeon RX 7900 XTX 24G, 24GB GDDR6 (GV-R79XTX-24GC-B)<br>- PowerColor Radeon RX 7900 XTX, 24GB GDDR6 (RX 7900 XTX 24G)<br>- XFX Radeon RX 7900 XTX, 24GB GDDR6 (RX-79XMBABF9)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>269 x 135 x 32,15mm</td></tr><tr><td>Material cooler</td><td>chrome-plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>4 x G1/4"</td></tr><tr><td>Thickness cooler bottom</td><td>11,3mm</td></tr><tr><td>Thickness cooling fins</td><td>0,4mm</td></tr><tr><td>Distance cooling fins</td><td>0,4mm</td></tr><tr><td>Illumination</td><td>digital aRGB LEDs</td></tr><tr><td>Power connector digital aRGB LEDs</td><td>3-Pin JST</td></tr><tr><td>Power digital aRGB LEDs</td><td>5V</td></tr><tr><td>Number of digital aRGB LEDs</td><td>15</td></tr><tr><td>Color</td><td>transparent</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data backplate</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>269 x 221 x 5mm</td></tr><tr><td>Material</td><td>aluminium</td></tr><tr><td>Color</td><td>black</td></tr></table><br><b>Warranty: 3 years</b><br><a href="https://www.alphacool.com/en/warranty-terms" target="_blank">???? Warranty Terms</a></p>
<p style="text-align: justify;">Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.<br /><br />The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.<br /><br />The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.<br /><br />The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances.<p> </p><b>Compatibility:</b><br>- XFX Speedster MERC 310 Radeon RX 7900 XT Black Edition, 20GB GDDR6 (RX-79TMERCB9)<br>- XFX Speedster MERC 310 Radeon RX 7900 XT, 20GB GDDR6 (RX-79TMERCU9)<br>- XFX Speedster MERC 310 Radeon RX 7900 XTX Black Edition, 24GB GDDR6 (RX-79XMERCB9)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>289,60 x 134,80 x 32,20mm</td></tr><tr><td>Material cooler</td><td>chrome-plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>4 x G1/4"</td></tr><tr><td>Thickness cooler bottom</td><td>11,3mm</td></tr><tr><td>Thickness cooling fins</td><td>0,4mm</td></tr><tr><td>Distance cooling fins</td><td>0,4mm</td></tr><tr><td>Illumination</td><td>digital aRGB LEDs</td></tr><tr><td>Power connector digital aRGB LEDs</td><td>3-Pin JST</td></tr><tr><td>Power digital aRGB LEDs</td><td>5V</td></tr><tr><td>Number of digital aRGB LEDs</td><td>17</td></tr><tr><td>Color</td><td>transparent</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data backplate</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>289,60 x 111,80 x 5mm</td></tr><tr><td>Material</td><td>aluminium</td></tr><tr><td>Color</td><td>black</td></tr></table><br><b>Warranty: 3 years</b><br><a href="https://www.alphacool.com/en/warranty-terms" target="_blank">???? Warranty Terms</a></p>
<p style="text-align: justify;">Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.<br /><br />The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.<br /><br />The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.<br /><br />The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances.<p> </p><b>Compatibility:</b><br>- PowerColor Radeon RX 7900 XTX Red Devil Limited Edition, 24GB GDDR6, HDMI, 3x DP (RX 7900 XTX 24G-E/OC/LIMITED)<br>- PowerColor Radeon RX 7900 XTX Red Devil, 24GB GDDR6, HDMI, 3x DP (RX 7900 XTX 24G-E/OC)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>287,21 x 146,10 x 32,20mm</td></tr><tr><td>Material cooler</td><td>chrome-plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>4 x G1/4"</td></tr><tr><td>Thickness cooler bottom</td><td>11,3mm</td></tr><tr><td>Thickness cooling fins</td><td>0,4mm</td></tr><tr><td>Distance cooling fins</td><td>0,4mm</td></tr><tr><td>Illumination</td><td>digital aRGB LEDs</td></tr><tr><td>Power connector digital aRGB LEDs</td><td>3-Pin JST</td></tr><tr><td>Power digital aRGB LEDs</td><td>5V</td></tr><tr><td>Number of digital aRGB LEDs</td><td>16</td></tr><tr><td>Color</td><td>transparent</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data backplate</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>287,21 x 123,10 x 5mm</td></tr><tr><td>Material</td><td>aluminium</td></tr><tr><td>Color</td><td>black</td></tr></table><br><b>Warranty: 3 years</b><br><a href="https://www.alphacool.com/en/warranty-terms" target="_blank">???? Warranty Terms</a></p>
<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Chrome-plated copper</b><br />The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- XFX Speedster MERC 310 Radeon RX 7900 XT Black Edition, 20GB GDDR6 (RX-79TMERCB9)<br>- XFX Speedster MERC 310 Radeon RX 7900 XT, 20GB GDDR6 (RX-79TMERCU9)<br>- XFX Speedster MERC 310 Radeon RX 7900 XTX Black Edition, 24GB GDDR6 (RX-79XMERCB9)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data radiator</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Options for fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler and pump</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>287,10 x 145,00 x 71,43mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data quick fasteners</b></td></tr><tr><td>Dimensions (L x D)</td><td>95 x 27mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data tube</b></td></tr><tr><td>Length</td><td>50cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 120 x 25mm</td></tr><tr><td>Net weight</td><td>187g</td></tr><tr><td>Max working temperature</td><td>60°C</td></tr></table><br></p>
<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Chrome-plated copper</b><br />The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- AMD Radeon RX 7900 XT, 20GB GDDR6<br>- ASRock Radeon RX 7900 XT, 20GB GDDR6<br>- Asus Radeon RX 7900 XT, RX7900XT-20G, 20GB GDDR6 (90YV0IU0-U0NM00)<br>- Biostar Radeon RX 7900 XT, 20GB GDDR6 (VA7906XM00)<br>- Gigabyte Radeon RX 7900 XT 20G, 20GB GDDR6 (GV-R79XT-20GC-B)<br>- PowerColor Radeon RX 7900 XT, 20GB GDDR6 (RX 7900 XT 20G)<br>- Sapphire Radeon RX 7900 XT, 20GB GDDR6 (21323-01-20G)<br>- XFX Radeon RX 7900 XT, 20GB GDDR6 (RX-79TMBABF9)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data radiator</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Options for fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler and pump</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>265,50 x 135,00 x 71,43mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data quick fasteners</b></td></tr><tr><td>Dimensions (L x D)</td><td>95 x 27mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data tube</b></td></tr><tr><td>Length</td><td>50cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 120 x 25mm</td></tr><tr><td>Net weight</td><td>187g</td></tr><tr><td>Max working temperature</td><td>60°C</td></tr></table><br></p>
<p style="text-align: justify;">The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.<br /><br /><b>Fullcover Waterblock?</b><br />The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.<br /><br /><b>Chrome-plated copper</b><br />The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.<br /><br /><b>Pump</b><br />The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.<br /><br /><b>Fittings and Tubing</b><br />As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.<br /><br /><b>Expandability</b><br />By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.<br /><br /><b>Lighting and fans</b><br />The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.<br /><br /><b>NexXxoS Radiator</b><br />As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.<br /><br />The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.<br /><br /><b>Technical note!</b><br />Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.<p> </p><b>Compatibility:</b><br>- AMD Radeon RX 7900 XTX, 24GB GDDR6<br>- ASRock Radeon RX 7900 XTX, 24GB GDDR6<br>- Asus Radeon RX 7900 XTX, RX7900XTX-24G, 24GB GDDR6 (90YV0IT0-U0NM00)<br>- Biostar Radeon RX 7900 XTX, 24GB GDDR6 (VA7906AEF4)<br>- Gigabyte Radeon RX 7900 XTX 24G, 24GB GDDR6 (GV-R79XTX-24GC-B)<br>- PowerColor Radeon RX 7900 XTX, 24GB GDDR6 (RX 7900 XTX 24G)<br>- XFX Radeon RX 7900 XTX, 24GB GDDR6 (RX-79XMBABF9)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data radiator</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>395 x 124 x 30mm (+/- 3%)</td></tr><tr><td>Material cooling fins, chambers & channels</td><td>Copper</td></tr><tr><td>Material threads</td><td>Brass</td></tr><tr><td>Material outer housing</td><td>stainless steel</td></tr><tr><td>G 1/4“ threads</td><td>2 x for tubes (+ 1x Fillport G1/4“)</td></tr><tr><td>For fan size</td><td>120 mm</td></tr><tr><td>Options for fan assembly</td><td>3 x one-sided / 6 x both-sided</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler and pump</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>268,58 x 144,80 x 47,70 mm</td></tr><tr><td>Material cooler bottom</td><td>Chrome plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>2 x G1/4“</td></tr><tr><td>Pump type</td><td>DC-LT 2</td></tr><tr><td>Pump speed</td><td>2600 rpm (+/- 10%)</td></tr><tr><td>Head of delivery</td><td>1 m</td></tr><tr><td>Maximum flow rate</td><td>72 L/h</td></tr><tr><td>Voltage</td><td>6-13.5V DC</td></tr><tr><td>Power consumption</td><td>3.2W</td></tr><tr><td>MTBF</td><td>50.000 h</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data liquid</b></td></tr><tr><td>Color</td><td>clear</td></tr><tr><td>Ingredient 1</td><td>Destilled water (CAS-number 7732-18-5)</td></tr><tr><td>Ingredient 2</td><td>Glysantin (CAS-number 1017-21-1)</td></tr><tr><td>Working temperatures</td><td>-15 C° / +90 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data quick fasteners</b></td></tr><tr><td>Dimensions (L x D)</td><td>95 x 27mm</td></tr><tr><td>Material</td><td>Nylon</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Color</td><td>Black</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fittings</b></td></tr><tr><td>L x D straight fitting</td><td>24 x 18mm</td></tr><tr><td>Quantity straight fittings</td><td>2x</td></tr><tr><td>L x B x H 90° fitting</td><td>35 x 27 x 17mm</td></tr><tr><td>Quantity 90° fittings</td><td>2x</td></tr><tr><td>For tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Material fittings</td><td>Brass</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data tube</b></td></tr><tr><td>Length</td><td>50cm</td></tr><tr><td>Material tube</td><td>TPV (EPDM/PP)</td></tr><tr><td>Color</td><td>Matt black</td></tr><tr><td>Tube size</td><td>12,7 / 7,6mm</td></tr><tr><td>Hardness grade</td><td>35 Shore-A to 50 Shore-D</td></tr><tr><td>Working temperature</td><td>-50 to +155 °C</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data fan</b></td></tr><tr><td>Speed</td><td>0 - 2500 RPM</td></tr><tr><td>Static pressure</td><td>3,17 mm H2O</td></tr><tr><td>Air flow rate</td><td>119,8 m³/h</td></tr><tr><td>Bearings</td><td>Sleeve bearing</td></tr><tr><td>Fan connector</td><td>4-Pin PWM</td></tr><tr><td>Connection Digital aRGB</td><td>3-Pin JST + 3-Pin 5V</td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 120 x 25mm</td></tr><tr><td>Net weight</td><td>187g</td></tr><tr><td>Max working temperature</td><td>60°C</td></tr></table><br></p>
Full-Cover-Waterblock von EK Water Blocks, für Asus TUF Radeon RX 7900 XT und XTX-Grafikkarten, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung
Full-Cover-Waterblock von EK Water Blocks, für PowerColor Red Devil AMD Radeon RX 7900 XTX-Grafikkarten, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung
Full-Cover-Waterblock von EK Water Blocks, für AMD Radeon RX 7900 XTX Reference-Grafikkarten, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung
Enjoy serious speed and the ultimate power efficiency for gaming and creating. This processor comes fully unlocked, overclockable, and will remain cool and quiet with an included AMD Wraith Prism cooler with RGB LED lighting. Desktop Ryzen 9, 7900 Raphael AM5, 3700 MHz Number of cores 12, Cache 64MB Socket SAM5, Wattage 65 Watts Turbo frequency 5400 MHz, GPU Model Radeon GPU clock 2200 MHz, Max temperature 95°C Packing type BOX, Cooler included
Graphics Card GIGABYTE AMD Radeon RX 7900 GRE 16 GB GDDR6 256 bit PCIE 4.0 16x 2xHDMI 2xDisplayPort GV-R79GREGAMINGOC-16GD
Tootekood: GV-R79GREGAMINGOC-16GDGraphic cards
Radeon™ RX 7900 GRE GAMING OC 16G Powered by Radeon™ RX 7900 GRE Integrated with 16GB GDDR6 256-bit memory interface WINDFORCE Cooling System RGB Fusion Dual BIOS Protection metal back plate
