Kõik hinnakirjad

Lüfterloses Design-Case von Akasa, für den Raspberry Pi 4B, aus Aluminium, Aussparungen für alle wichtigen Anschlüsse, inklusive Kühlblöcke und Thermal-Pads und Wärmeleitpaste

<p style="text-align: justify;">The Alphacool Aurora Acryl RADEON RX 6800/6900(XT) Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock<br /><br /><b>More Performance!</b><br />During the development of the EIsblock Aurora RADEON RX 6800/6900(XT) graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.<br /><br /><b>New Design!</b><br />The Eisblock Aurora RADEON RX 6800/6900(XT) cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora RADEON RX 6800/6900(XT) Eisblock cooler its very own unique identity.<br /><br /><b>Copper or Aluminium?</b><br />Of course, Alphacool only uses copper for its water coolers. With the Aurora RADEON RX 6800/6900(XT) Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling.<br /><br /><b>Is There Anything Else New?</b><br />The Eisblock Aurora RADEON RX 6800/6900(XT) also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler.<br /><br />The Alphacool Aurora RADEON RX 6800/6900(XT) Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation.<p> </p><b>Compatibility:</b><br>- Asus ROG Strix Radeon RX 6800 OC, ROG-STRIX-RX6800-O16G-GAMING, 16GB GDDR6 (90YV0FL1-M0NM00)<br>- Asus TUF Gaming Radeon RX 6800 OC, TUF-RX6800-O16G-GAMING, 16GB GDDR6 (90YV0FM1-M0NA00)<br>- Asus ROG Strix Radeon RX 6800 XT OC, ROG-STRIX-RX6800XT-O16G-GAMING, 16GB GDDR6<br>- Asus TUF Gaming Radeon RX 6800 XT OC, TUF-RX6800XT-O16G-GAMING, 16GB GDDR6 (90YV0FL1-M0NM00)<br>- Asus TUF Gaming Radeon RX 6900 XT OC, TUF-RX6900XT-O16G-GAMING, 16GB GDDR6 (90YV0GE0-M0NM00)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Data cooler</b></td></tr><tr><td>Dimension (L x W x H)</td><td>152 x 277 x 23 mm</td></tr><tr><td>Material cooler</td><td>Nickle-plated copper</td></tr><tr><td>Material cooler top</td><td>Acryl</td></tr><tr><td>Threads</td><td>4 x G1/4“</td></tr><tr><td>Thickness cooling fins</td><td>0,6 mm</td></tr><tr><td>Illumination</td><td>Digital RGB LEDs</td></tr><tr><td>Power connector Digital RGB LEDs</td><td>3-Pin JST</td></tr><tr><td>Power Digital RGB LEDs</td><td>5V</td></tr><tr><td>Color</td><td>transparent</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data backplate</b></td></tr><tr><td>Abmessungen (L x W x H)</td><td>127,5 x 277 x 6 mm</td></tr><tr><td>Material</td><td>Aluminium</td></tr><tr><td>Color</td><td>Black</td></tr></table><br></p>

<p style="text-align: justify;">The Apex Soft are Alphacool's high-end solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Apex Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.</p> <p style="text-align: justify;"><strong>Better than standard thermal pads?</strong> <br>The material of the Apex Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Apex Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.</p> <p style="text-align: justify;"><strong>But that is not the only advantage!</strong> <br>The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Apex Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.</p> <p style="text-align: justify;"><strong>Cutting to size? No problem!</strong> <br>When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.</p> <p style="text-align: justify;">The Alphacool Apex Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads.</p> <table> <tbody> <tr> <td><strong>Technical data</strong></td> </tr> <tr> <td>L x W x H</td> <td>100 x 100 x 1 mm</td> </tr> <tr> <td>Colour</td> <td>grey</td> </tr> <tr> <td>Specific Gravitiy ASTM D792</td> <td>3,4 g/cc</td> </tr> <tr> <td>Thermal Conductivity ASTM D5470</td> <td>11.0 W/mK</td> </tr> <tr> <td>Hardness ASTM 2240</td> <td>72 Shore OO</td> </tr> <tr> <td>Useful Temperature</td> <td>-40 to +150 °C</td> </tr> <tr> <td>Volume Resistivity ASTM D257</td> <td>1.0x10¹¹ Ohm-m</td> </tr> <tr> <td>Dielectric Constant ASTM D150</td> <td>7,2 MHz</td> </tr> <tr> <td>Dielectric Breakdown Voltage ASTM D149</td> <td>14 kV/mm</td> </tr> <tr> <td>Flame Rating UL 94</td> <td>V-0</td> </tr> <tr> <td>Weight</td> <td>40 g</td> </tr> </tbody> </table> <p> </p> <p><strong>Download Datasheet PDF: <a href="https://www.alphacool.com/download/ENG_1021777_Alphacool_Apex_Soft_thermal_pad_11Wmk_100x100x1mm_Datasheet.pdf" target="_blank">Alphacool Apex Soft Thermal Pad 11W/mk 100x100x1mm</a></strong></p>

<p style="text-align: justify;">The Apex Soft are Alphacool's high-end solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Apex Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.</p> <p style="text-align: justify;"><strong>Better than standard thermal pads?</strong> <br>The material of the Apex Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Apex Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.</p> <p style="text-align: justify;"><strong>But that is not the only advantage!</strong> <br>The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Apex Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.</p> <p style="text-align: justify;"><strong>Cutting to size? No problem!</strong> <br>When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.</p> <p style="text-align: justify;">The Alphacool Apex Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads.</p> <table> <tbody> <tr> <td><strong>Technical data</strong></td> </tr> <tr> <td>L x W x H</td> <td>120 x 20 x 1 mm</td> </tr> <tr> <td>Colour</td> <td>Grey</td> </tr> <tr> <td>Specific Gravitiy ASTM D792</td> <td>3,4 g/cc</td> </tr> <tr> <td>Thermal Conductivity ASTM D5470</td> <td>11.0 W/mK</td> </tr> <tr> <td>Hardness ASTM 2240</td> <td>72 Shore OO</td> </tr> <tr> <td>Useful Temperature</td> <td>-40 to +150 °C</td> </tr> <tr> <td>Volume Resistivity ASTM D257</td> <td>1.0x10¹¹ Ohm-m</td> </tr> <tr> <td>Dielectric Constant ASTM D150</td> <td>7,2 MHz</td> </tr> <tr> <td>Dielectric Breakdown Voltage ASTM D149</td> <td>14 kV/mm</td> </tr> <tr> <td>Flame Rating UL 94</td> <td>V-0</td> </tr> <tr> <td>Weight</td> <td>20 g</td> </tr> </tbody> </table> <p> </p> <p><strong>Download Datasheet PDF: <a href="https://www.alphacool.com/download/ENG_1021779_Alphacool_Apex_Soft_thermal_pad_11Wmk_2x_120x20x1mm_Datasheet.pdf" target="_blank"> Alphacool Apex Soft Thermal Pad 11W/mk 2x 120x20x1mm</a></strong></p>

<p style="text-align: justify;">The Apex Soft are Alphacool's high-end solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Apex Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.</p> <p style="text-align: justify;"><strong>Better than standard thermal pads?</strong> <br>The material of the Apex Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Apex Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.</p> <p style="text-align: justify;"><strong>But that is not the only advantage!</strong> <br>The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Apex Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.</p> <p style="text-align: justify;"><strong>Cutting to size? No problem!</strong> <br>When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.</p> <p style="text-align: justify;">The Alphacool Apex Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads.</p> <table> <tbody> <tr> <td><strong>Technical data</strong></td> </tr> <tr> <td>L x W x H</td> <td>100 x 100 x 1 mm</td> </tr> <tr> <td>Colour</td> <td>Grey</td> </tr> <tr> <td>Specific Gravitiy ASTM D792</td> <td>3,2 g/cc</td> </tr> <tr> <td>Thermal Conductivity ASTM D5470</td> <td>14.0 W/mK</td> </tr> <tr> <td>Hardness ASTM 2240</td> <td>80 Shore OO</td> </tr> <tr> <td>Useful Temperature</td> <td>-40 to +150 °C</td> </tr> <tr> <td>Volume Resistivity ASTM D257</td> <td>1.0x10¹¹ Ohm-m</td> </tr> <tr> <td>Dielectric Constant ASTM D150</td> <td>6,8 MHz</td> </tr> <tr> <td>Dielectric Breakdown Voltage ASTM D149</td> <td>13 kV/mm</td> </tr> <tr> <td>Flame Rating UL 94</td> <td>V-0</td> </tr> <tr> <td>Weight</td> <td>43 g</td> </tr> </tbody> </table> <p> </p> <p><strong>Download Datasheet PDF: <a href="https://www.alphacool.com/download/ENG_1021778_Alphacool_Apex_Soft_thermal_pad_14Wmk_100x100x1mm_Datasheet.pdf" target="_blank"> Alphacool Apex Soft Thermal Pad 14W/mk 100x100x1mm </a></strong></p>

<p style="text-align: justify;">The Apex Soft are Alphacool's high-end solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Apex Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.</p> <p style="text-align: justify;"><strong>Better than standard thermal pads?</strong> <br>The material of the Apex Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Apex Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.</p> <p style="text-align: justify;"><strong>But that is not the only advantage!</strong> <br>The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Apex Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.</p> <p style="text-align: justify;"><strong>Cutting to size? No problem!</strong> <br>When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.</p> <p style="text-align: justify;">The Alphacool Apex Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads.</p> <table> <tbody> <tr> <td><strong>Technical data</strong></td> </tr> <tr> <td>L x W x H</td> <td>120 x 20 x 1 mm</td> </tr> <tr> <td>Colour</td> <td>Grey</td> </tr> <tr> <td>Specific Gravitiy ASTM D792</td> <td>3,2 g/cc</td> </tr> <tr> <td>Thermal Conductivity ASTM D5470</td> <td>14.0 W/mK</td> </tr> <tr> <td>Hardness ASTM 2240</td> <td>80 Shore OO</td> </tr> <tr> <td>Useful Temperature</td> <td>-40 to +150 °C</td> </tr> <tr> <td>Volume Resistivity ASTM D257</td> <td>1.0x10¹¹ Ohm-m</td> </tr> <tr> <td>Dielectric Constant ASTM D150</td> <td>6,8 MHz</td> </tr> <tr> <td>Dielectric Breakdown Voltage ASTM D149</td> <td>13 kV/mm</td> </tr> <tr> <td>Flame Rating UL 94</td> <td>V-0</td> </tr> <tr> <td>Weight</td> <td>20 g</td> </tr> </tbody> </table> <p> </p> <p><strong>Download Datasheet PDF: <a href="https://www.alphacool.com/download/ENG_1021780_Alphacool_Apex_Soft_thermal_pad_14Wmk_2x_120x20x1mm_Datasheet.pdf" target="_blank"> Alphacool Apex Soft Thermal Pad 14W/mk 2x 120x20x1mm</a></strong></p>

<p style="text-align: justify;">Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.<br /><br /><b>Powerful!</b><br />Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.<br /><br /><b>Increased lifespan!</b><br />Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.<br /><br /><b>Versatile!</b><br />Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>100 x 100 x 0,5mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>16.6 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D2240)</td><td>65 (Shore 00) (±5)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>5×10¹² Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>5 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.6 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>20%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>dark grey</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.<br /><br /><b>Powerful!</b><br />Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.<br /><br /><b>Increased lifespan!</b><br />Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.<br /><br /><b>Versatile!</b><br />Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>100 x 100 x 1,5mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>16.6 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D2240)</td><td>65 (Shore 00) (±5)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>5×10¹² Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>5 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.6 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>20%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>dark grey</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.<br /><br /><b>Powerful!</b><br />Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.<br /><br /><b>Increased lifespan!</b><br />Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.<br /><br /><b>Versatile!</b><br />Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>100 x 100 x 1mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>16.6 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D2240)</td><td>65 (Shore 00) (±5)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>5×10¹² Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>5 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.6 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>20%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>dark grey</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.<br /><br /><b>Powerful!</b><br />Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.<br /><br /><b>Increased lifespan!</b><br />Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.<br /><br /><b>Versatile!</b><br />Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 20 x 0,5mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>16.6 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D2240)</td><td>65 (Shore 00) (±5)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>5×10¹² Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>5 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.6 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>20%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>dark grey</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.<br /><br /><b>Powerful!</b><br />Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.<br /><br /><b>Increased lifespan!</b><br />Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.<br /><br /><b>Versatile!</b><br />Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 20 x 1,5mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>16.6 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D2240)</td><td>65 (Shore 00) (±5)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>5×10¹² Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>5 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.6 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>20%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>dark grey</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.<br /><br /><b>Powerful!</b><br />Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.<br /><br /><b>Increased lifespan!</b><br />Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.<br /><br /><b>Versatile!</b><br />Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 20 x 1mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>16.6 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D2240)</td><td>65 (Shore 00) (±5)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>5×10¹² Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>5 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.6 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>20%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>dark grey</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.<br /><br /><b>Powerful!</b><br />Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.<br /><br /><b>Increased lifespan!</b><br />Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.<br /><br /><b>Versatile!</b><br />Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>100 x 100 x 0,5mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>17.8 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D2240)</td><td>65 (Shore 00) (±5)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>6×10¹² Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>4 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.5 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>20%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>light grey</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.<br /><br /><b>Powerful!</b><br />Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.<br /><br /><b>Increased lifespan!</b><br />Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.<br /><br /><b>Versatile!</b><br />Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>100 x 100 x 1,5mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>17.8 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D2240)</td><td>65 (Shore 00) (±5)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>6×10¹² Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>4 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.5 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>20%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>light grey</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.<br /><br /><b>Powerful!</b><br />Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.<br /><br /><b>Increased lifespan!</b><br />Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.<br /><br /><b>Versatile!</b><br />Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>100 x 100 x 1mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>17.8 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D2240)</td><td>65 (Shore 00) (±5)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>6×10¹² Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>4 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.5 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>20%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>light grey</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.<br /><br /><b>Powerful!</b><br />Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.<br /><br /><b>Increased lifespan!</b><br />Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.<br /><br /><b>Versatile!</b><br />Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 20 x 0,5mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>17.8 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D2240)</td><td>65 (Shore 00) (±5)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>6×10¹² Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>4 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.5 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>20%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>light grey</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.<br /><br /><b>Powerful!</b><br />Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.<br /><br /><b>Increased lifespan!</b><br />Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.<br /><br /><b>Versatile!</b><br />Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 20 x 1,5mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>17.8 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D2240)</td><td>65 (Shore 00) (±5)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>6×10¹² Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>4 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.5 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>20%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>light grey</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.<br /><br /><b>Powerful!</b><br />Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.<br /><br /><b>Increased lifespan!</b><br />Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.<br /><br /><b>Versatile!</b><br />Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 20 x 1mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>17.8 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D2240)</td><td>65 (Shore 00) (±5)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>6×10¹² Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>4 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.5 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>20%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>light grey</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.<br /><br />The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.<br /><br />The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.<br /><br />The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances.<p> </p><b>Compatibility:</b><br>- Asus ROG Strix GeForce RTX 4080 OC, ROG-STRIX-RTX4080-O16G-GAMING, 16GB GDDR6X (90YV0IC0-M0NA00)<br>- Asus ROG Strix GeForce RTX 4080, ROG-STRIX-RTX4080-16G-GAMING, 16GB GDDR6X (90YV0IC1-M0NA00)<br>- Asus TUF Gaming GeForce RTX 4080 OC, TUF-RTX4080-O16G-GAMING, 16GB GDDR6X (90YV0IB0-M0NA00)<br>- Asus TUF Gaming GeForce RTX 4080, TUF-RTX4080-16G-GAMING, 16GB GDDR6X (90YV0IB1-M0NA00)<br>- Asus ROG Strix GeForce RTX 4080 SUPER 16GB GDDR6X<br>- Asus ROG Strix GeForce RTX 4080 SUPER 16GB GDDR6X OC Edition<br>- Asus ROG Strix GeForce RTX 4080 SUPER 16GB GDDR6X White Edition<br>- Asus ROG Strix GeForce RTX 4080 SUPER 16GB GDDR6X White OC Edition<br>- Asus TUF Gaming GeForce RTX 4080 SUPER 16GB GDDR6X<br>- Asus TUF Gaming GeForce RTX 4080 SUPER 16GB GDDR6X OC Edition<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>224,03 x 158,25 x 32,03mm</td></tr><tr><td>Material cooler</td><td>chrome-plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>4 x G1/4"</td></tr><tr><td>Thickness cooler bottom</td><td>11,3mm</td></tr><tr><td>Thickness cooling fins</td><td>0,4mm</td></tr><tr><td>Distance cooling fins</td><td>0,4mm</td></tr><tr><td>Illumination</td><td>digital aRGB LEDs</td></tr><tr><td>Power connector digital aRGB LEDs</td><td>3-Pin JST</td></tr><tr><td>Power digital aRGB LEDs</td><td>5V</td></tr><tr><td>Number of digital aRGB LEDs</td><td>12</td></tr><tr><td>Color</td><td>transparent</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data backplate</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>224,03 x 135,25 x 5mm</td></tr><tr><td>Material</td><td>aluminium</td></tr><tr><td>Color</td><td>black</td></tr></table><br><b>Warranty: 3 years</b><br><a href="https://www.alphacool.com/en/warranty-terms" target="_blank">???? Warranty Terms</a></p>

<p style="text-align: justify;">Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.<br /><br />The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.<br /><br />The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.<br /><br />The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances.<p> </p><b>Compatibility:</b><br>- MSI GeForce RTX 4080 16GB Suprim X, 16GB GDDR6X (V511-004R)<br>- MSI GeForce RTX 4080 Gaming X Trio 16GB, 16GB GDDR6X (V511-005R)<br>- MSI GeForce RTX 4080 SUPER 16G SUPRIM<br>- MSI GeForce RTX 4080 SUPER 16G SUPRIM X (V511-248R)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>269,16 x 153,70 x 31,64mm</td></tr><tr><td>Material cooler</td><td>chrome-plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>4 x G1/4"</td></tr><tr><td>Thickness cooler bottom</td><td>11,3mm</td></tr><tr><td>Thickness cooling fins</td><td>0,4mm</td></tr><tr><td>Distance cooling fins</td><td>0,4mm</td></tr><tr><td>Illumination</td><td>digital aRGB LEDs</td></tr><tr><td>Power connector digital aRGB LEDs</td><td>3-Pin JST</td></tr><tr><td>Power digital aRGB LEDs</td><td>5V</td></tr><tr><td>Number of digital aRGB LEDs</td><td>15</td></tr><tr><td>Color</td><td>transparent</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data backplate</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>269,16 x 130,70 x 5mm</td></tr><tr><td>Material</td><td>aluminium</td></tr><tr><td>Color</td><td>black</td></tr></table><br><b>Warranty: 3 years</b><br><a href="https://www.alphacool.com/en/warranty-terms" target="_blank">???? Warranty Terms</a></p>

<p style="text-align: justify;">Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.<br /><br />The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.<br /><br />The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.<br /><br />The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances.<p> </p><b>Compatibility:</b><br>- Manli GeForce RTX 4090 Gallardo, 24GB GDDR6X (N67540900M35300)<br>- Zotac Gaming GeForce RTX 4090 AMP Extreme AIRO, 24GB GDDR6X (ZT-D40900B-10P)<br>- Zotac Gaming GeForce RTX 4090 Trinity OC, 24GB GDDR6X (ZT-D40900J-10P)<br>- Zotac Gaming GeForce RTX 4090 Trinity, 24GB GDDR6X (ZT-D40900D-10P)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>235,40 x 145,90 x 32,10mm</td></tr><tr><td>Material cooler</td><td>chrome-plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>4 x G1/4"</td></tr><tr><td>Thickness cooler bottom</td><td>11,3mm</td></tr><tr><td>Thickness cooling fins</td><td>0,4mm</td></tr><tr><td>Distance cooling fins</td><td>0,4mm</td></tr><tr><td>Illumination</td><td>digital aRGB LEDs</td></tr><tr><td>Power connector digital aRGB LEDs</td><td>3-Pin JST</td></tr><tr><td>Power digital aRGB LEDs</td><td>5V</td></tr><tr><td>Number of digital aRGB LEDs</td><td>13</td></tr><tr><td>Color</td><td>transparent</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data backplate</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>235,40 x 122,90 x 5mm</td></tr><tr><td>Material</td><td>aluminium</td></tr><tr><td>Color</td><td>black</td></tr></table><br><b>Warranty: 3 years</b><br><a href="https://www.alphacool.com/en/warranty-terms" target="_blank">???? Warranty Terms</a></p>

<p style="text-align: justify;">Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.<br /><br />The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.<br /><br />The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.<br /><br />The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances.<p> </p><b>Compatibility:</b><br><br>- Asus ROG Matrix GeForce RTX 4090 Platinum, ROG-MATRIX-RTX4090-P24G-GAMING, 24GB GDDR6X (90YV0ID7-M0NM00)<br>- Asus ROG Strix GeForce RTX 4090 OC, ROG-STRIX-RTX4090-O24G-GAMING, 24GB GDDR6X (90YV0ID0-M0NA00)<br>- Asus ROG Strix GeForce RTX 4090, ROG-STRIX-RTX4090-24G-GAMING, 24GB GDDR6X (90YV0ID1-M0NA00)<br>- Asus TUF Gaming GeForce RTX 4090 OC, TUF-RTX4090-O24G-Gaming, 24GB GDDR6X (90YV0IE0-M0NA00)<br>- Asus TUF Gaming GeForce RTX 4090, TUF-RTX4090-24G-GAMING, 24GB GDDR6X (90YV0IE1-M0NA00)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>224,03 x 158,25 x 32,23mm</td></tr><tr><td>Material cooler</td><td>chrome-plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>4 x G1/4"</td></tr><tr><td>Thickness cooler bottom</td><td>11,3mm</td></tr><tr><td>Thickness cooling fins</td><td>0,4mm</td></tr><tr><td>Distance cooling fins</td><td>0,4mm</td></tr><tr><td>Illumination</td><td>digital aRGB LEDs</td></tr><tr><td>Power connector digital aRGB LEDs</td><td>3-Pin JST</td></tr><tr><td>Power digital aRGB LEDs</td><td>5V</td></tr><tr><td>Number of digital aRGB LEDs</td><td>12</td></tr><tr><td>Color</td><td>transparent</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data backplate</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>224,03 x 135,25 x 5mm</td></tr><tr><td>Material</td><td>aluminium</td></tr><tr><td>Color</td><td>black</td></tr></table><br><b>Warranty: 3 years</b><br><a href="https://www.alphacool.com/en/warranty-terms" target="_blank">???? Warranty Terms</a></p>

<p style="text-align: justify;">Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.<br /><br />The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.<br /><br />The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.<br /><br />The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances.<p> </p><b>Compatibility:</b><br>Attention! For PNY GeForce RTX 4080 the rear part of the PCB is not covered. This has no negative effect on the cooling performance<br>Note: The Inno3D GeForce RTX 4080 SUPER X3 is only compatible with the OC variant!<br>- Inno3D GeForce RTX 4080 iCHILL X3, 16GB GDDR6X (C40803-166XX-187049H)<br>- Inno3D GeForce RTX 4080 X3 OC, 16GB GDDR6X<br>- Inno3D GeForce RTX 4080 X3, 16GB GDDR6X<br>- PNY GeForce RTX 4080 16GB Verto Triple Fan, 16GB GDDR6X (VCG408016TFXPB1)<br>- Inno3D GeForce RTX 4080 SUPER iCHILL Black, 16GB GDDR6X (C408SB-166XX-18700006)<br>- Inno3D GeForce RTX 4080 SUPER iCHILL Frostbite, 16GB GDDR6X (C408S-166XX-1870FB)<br>- Inno3D GeForce RTX 4080 SUPER iCHILL X3, 16GB GDDR6X (C408S3-166XX-187049H)<br>- Inno3D GeForce RTX 4080 SUPER X3 OC, 16GB GDDR6X (N408S3-166XX-187049N)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>201,36 x 145,90 x 32,80mm</td></tr><tr><td>Material cooler</td><td>chrome-plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>4 x G1/4"</td></tr><tr><td>Thickness cooler bottom</td><td>11,3mm</td></tr><tr><td>Thickness cooling fins</td><td>0,4mm</td></tr><tr><td>Distance cooling fins</td><td>0,4mm</td></tr><tr><td>Illumination</td><td>digital aRGB LEDs</td></tr><tr><td>Power connector digital aRGB LEDs</td><td>3-Pin JST</td></tr><tr><td>Power digital aRGB LEDs</td><td>5V</td></tr><tr><td>Number of digital aRGB LEDs</td><td>11</td></tr><tr><td>Color</td><td>transparent</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data backplate</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>201,36 x 122,90 x 5mm</td></tr><tr><td>Material</td><td>aluminium</td></tr><tr><td>Color</td><td>black</td></tr></table><br><b>Warranty: 3 years</b><br><a href="https://www.alphacool.com/en/warranty-terms" target="_blank">???? Warranty Terms</a></p>

<p style="text-align: justify;">Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.<br /><br />The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.<br /><br />The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.<br /><br />The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances.<p> </p><b>Compatibility:</b><br>- Nvidia GeForce RTX 4090 Founders Edition, 24GB GDDR6X (900-1G136-2530-000)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler</b></td></tr><tr><td>L x W x H</td><td>208,87 x 148,69 x 32,33mm</td></tr><tr><td>Material cooler</td><td>chrome-plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>4 x G1/4"</td></tr><tr><td>Thickness cooler bottom</td><td>11,3mm</td></tr><tr><td>Thickness cooling fins</td><td>0,4mm</td></tr><tr><td>Distance cooling fins</td><td>0,4mm</td></tr><tr><td>Illumination</td><td>digital aRGB LEDs</td></tr><tr><td>Power connector digital aRGB LEDs</td><td>3-Pin JST</td></tr><tr><td>Power digital aRGB LEDs</td><td>5V</td></tr><tr><td>Number of digital aRGB LEDs</td><td>12</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data backplate</b></td></tr><tr><td>L x W x H</td><td>208,87 x 125,69 x 5,76mm</td></tr><tr><td>Material</td><td>aluminium</td></tr><tr><td>Color</td><td>black</td></tr></table><br><b>Warranty: 3 years</b><br><a href="https://www.alphacool.com/en/warranty-terms" target="_blank">???? Warranty Terms</a></p>

<p style="text-align: justify;">Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.<br /><br />The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.<br /><br />The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.<br /><br />The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances.<br /><br /><b>Important note:</b> The RTX 4090 Core Reference cooler is not compatible with Nvidia's Geforce RTX 4090 Founders Edition. The RTX 4090 FE is compatible with the following cooler: Alphacool Core Geforce RTX 4090 Founders Edition with Backplate (Art. 13470).<p> </p><b>Compatibility:</b><br>Attention: Please note that a part of the PCB is not covered from the water block<br>Attention: Unfortunately Inno3D is using two different PCB Layouts. Please check your serial number. If it looks like following, it is not compatible with our water blocks: 32-879-xxxx8xxxx<br>_________________________________<br>- Inno3D GeForce RTX 4090 iCHILL Black, 24GB GDDR6X (C4090-246XX-18330005)<br>- Inno3D GeForce RTX 4090 iCHILL Frostbite, 24GB GDDR6X (C4090-246XX-1833FB)<br>- Inno3D GeForce RTX 4090 iCHILL X3, 24GB GDDR6X (C40903-246XX-1833VA47)<br>- Inno3D GeForce RTX 4090 X3 OC, 24GB GDDR6X (N40903-246XX-18332989)<br>- KFA² GeForce RTX 4090 SG (1-Click OC), 24GB GDDR6X (49NXM5MD6DSK)<br>- PNY GeForce RTX 4090 XLR8 Gaming Verto Epic-X RGB Overclocked Triple Fan, 24GB GDDR6X (VCG409024TFXXPB1-O)<br>- PNY GeForce RTX 4090 XLR8 Gaming Verto Epic-X RGB Triple Fan, 24GB GDDR6X (VCG409024TFXXPB1)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler</b></td></tr><tr><td>L x W x H</td><td>222,36 x 145,85 x 32,65mm</td></tr><tr><td>Material cooler</td><td>chrome-plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>4 x G1/4"</td></tr><tr><td>Thickness cooler bottom</td><td>11,3mm</td></tr><tr><td>Thickness cooling fins</td><td>0,4mm</td></tr><tr><td>Distance cooling fins</td><td>0,4mm</td></tr><tr><td>Illumination</td><td>digital aRGB LEDs</td></tr><tr><td>Power connector digital aRGB LEDs</td><td>3-Pin JST</td></tr><tr><td>Power digital aRGB LEDs</td><td>5V</td></tr><tr><td>Number of digital aRGB LEDs</td><td>12</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data backplate</b></td></tr><tr><td>L x W x H</td><td>222,36 x 122,85 x 5,78mm</td></tr><tr><td>Material</td><td>aluminium</td></tr><tr><td>Color</td><td>black</td></tr></table><br><b>Warranty: 3 years</b><br><a href="https://www.alphacool.com/en/warranty-terms" target="_blank">???? Warranty Terms</a></p>

<p style="text-align: justify;">Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.<br /><br />The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.<br /><br />The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.<br /><br />The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances.<p> </p><b>Compatibility:</b><br>- XFX Speedster MERC 310 Radeon RX 7900 XT Black Edition, 20GB GDDR6 (RX-79TMERCB9)<br>- XFX Speedster MERC 310 Radeon RX 7900 XT, 20GB GDDR6 (RX-79TMERCU9)<br>- XFX Speedster MERC 310 Radeon RX 7900 XTX Black Edition, 24GB GDDR6 (RX-79XMERCB9)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>289,60 x 134,80 x 32,20mm</td></tr><tr><td>Material cooler</td><td>chrome-plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>4 x G1/4"</td></tr><tr><td>Thickness cooler bottom</td><td>11,3mm</td></tr><tr><td>Thickness cooling fins</td><td>0,4mm</td></tr><tr><td>Distance cooling fins</td><td>0,4mm</td></tr><tr><td>Illumination</td><td>digital aRGB LEDs</td></tr><tr><td>Power connector digital aRGB LEDs</td><td>3-Pin JST</td></tr><tr><td>Power digital aRGB LEDs</td><td>5V</td></tr><tr><td>Number of digital aRGB LEDs</td><td>17</td></tr><tr><td>Color</td><td>transparent</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data backplate</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>289,60 x 111,80 x 5mm</td></tr><tr><td>Material</td><td>aluminium</td></tr><tr><td>Color</td><td>black</td></tr></table><br><b>Warranty: 3 years</b><br><a href="https://www.alphacool.com/en/warranty-terms" target="_blank">???? Warranty Terms</a></p>

<p style="text-align: justify;">Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.<br /><br />The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.<br /><br />The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.<br /><br />The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances.<p> </p><b>Compatibility:</b><br>- PowerColor Radeon RX 7900 XTX Red Devil Limited Edition, 24GB GDDR6, HDMI, 3x DP (RX 7900 XTX 24G-E/OC/LIMITED)<br>- PowerColor Radeon RX 7900 XTX Red Devil, 24GB GDDR6, HDMI, 3x DP (RX 7900 XTX 24G-E/OC)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>287,21 x 146,10 x 32,20mm</td></tr><tr><td>Material cooler</td><td>chrome-plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>4 x G1/4"</td></tr><tr><td>Thickness cooler bottom</td><td>11,3mm</td></tr><tr><td>Thickness cooling fins</td><td>0,4mm</td></tr><tr><td>Distance cooling fins</td><td>0,4mm</td></tr><tr><td>Illumination</td><td>digital aRGB LEDs</td></tr><tr><td>Power connector digital aRGB LEDs</td><td>3-Pin JST</td></tr><tr><td>Power digital aRGB LEDs</td><td>5V</td></tr><tr><td>Number of digital aRGB LEDs</td><td>16</td></tr><tr><td>Color</td><td>transparent</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data backplate</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>287,21 x 123,10 x 5mm</td></tr><tr><td>Material</td><td>aluminium</td></tr><tr><td>Color</td><td>black</td></tr></table><br><b>Warranty: 3 years</b><br><a href="https://www.alphacool.com/en/warranty-terms" target="_blank">???? Warranty Terms</a></p>

<p style="text-align: justify;">Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.<br /><br />The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.<br /><br />The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.<br /><br />The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances.<p> </p><b>Compatibility:</b><br>- AMD Radeon RX 7900 XTX, 24GB GDDR6<br>- ASRock Radeon RX 7900 XTX, 24GB GDDR6<br>- Asus Radeon RX 7900 XTX, RX7900XTX-24G, 24GB GDDR6 (90YV0IT0-U0NM00)<br>- Biostar Radeon RX 7900 XTX, 24GB GDDR6 (VA7906AEF4)<br>- Gigabyte Radeon RX 7900 XTX 24G, 24GB GDDR6 (GV-R79XTX-24GC-B)<br>- PowerColor Radeon RX 7900 XTX, 24GB GDDR6 (RX 7900 XTX 24G)<br>- XFX Radeon RX 7900 XTX, 24GB GDDR6 (RX-79XMBABF9)<br><p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data cooler</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>269 x 135 x 32,15mm</td></tr><tr><td>Material cooler</td><td>chrome-plated copper</td></tr><tr><td>Material cooler top</td><td>acrylic</td></tr><tr><td>Threads</td><td>4 x G1/4"</td></tr><tr><td>Thickness cooler bottom</td><td>11,3mm</td></tr><tr><td>Thickness cooling fins</td><td>0,4mm</td></tr><tr><td>Distance cooling fins</td><td>0,4mm</td></tr><tr><td>Illumination</td><td>digital aRGB LEDs</td></tr><tr><td>Power connector digital aRGB LEDs</td><td>3-Pin JST</td></tr><tr><td>Power digital aRGB LEDs</td><td>5V</td></tr><tr><td>Number of digital aRGB LEDs</td><td>15</td></tr><tr><td>Color</td><td>transparent</td></tr></table><br><table><tr><td colspan="2" style="text-align: left"><b>Technical data backplate</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>269 x 221 x 5mm</td></tr><tr><td>Material</td><td>aluminium</td></tr><tr><td>Color</td><td>black</td></tr></table><br><b>Warranty: 3 years</b><br><a href="https://www.alphacool.com/en/warranty-terms" target="_blank">???? Warranty Terms</a></p>

<p style="text-align: justify;">Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.<br /><br /><b>Better than standard thermal pads?</b><br />The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.<br /><br /><b>Increased service life!</b><br />The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.<br /><br /><b>Versatile use!</b><br />Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>100 x 100 x 0,5mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>6.2 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D412)</td><td>50 (Shore 00) (±15)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>1×10¹³ Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>6 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.1 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>50%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>blue</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.<br /><br /><b>Better than standard thermal pads?</b><br />The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.<br /><br /><b>Increased service life!</b><br />The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.<br /><br /><b>Versatile use!</b><br />Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>100 x 100 x 1,5mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>6.2 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D412)</td><td>50 (Shore 00) (±15)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>1×10¹³ Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>6 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.1 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>50%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>blue</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.<br /><br /><b>Better than standard thermal pads?</b><br />The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.<br /><br /><b>Increased service life!</b><br />The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.<br /><br /><b>Versatile use!</b><br />Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>100 x 100 x 1mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>6.2 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D412)</td><td>50 (Shore 00) (±15)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>1×10¹³ Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>6 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.1 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>50%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>blue</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.<br /><br /><b>Better than standard thermal pads?</b><br />The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.<br /><br /><b>Increased service life!</b><br />The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.<br /><br /><b>Versatile use!</b><br />Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>100 x 100 x 2mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>6.2 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D412)</td><td>50 (Shore 00) (±15)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>1×10¹³ Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>6 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.1 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>50%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>blue</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.<br /><br /><b>Better than standard thermal pads?</b><br />The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.<br /><br /><b>Increased service life!</b><br />The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.<br /><br /><b>Versatile use!</b><br />Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>100 x 100 x 3mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>6.2 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D412)</td><td>50 (Shore 00) (±15)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>1×10¹³ Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>6 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.1 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>50%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>blue</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.<br /><br /><b>Better than standard thermal pads?</b><br />The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.<br /><br /><b>Increased service life!</b><br />The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.<br /><br /><b>Versatile use!</b><br />Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>120 x 20 x 0,5mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>6.2 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D412)</td><td>50 (Shore 00) (±15)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>1×10¹³ Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>6 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.1 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>50%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>blue</td></tr></table><br></p>

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability. Better than standard thermal pads? The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer. Increased service life! The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance. Versatile use! Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc.   Technical data thermal pad Dimensions (L x W x H) 120 x 20 x 1,5mm Thermal Conductivity (ASTM D5470) 6.2 W/mK (±10%) Hardness (ASTM D412) 50 (Shore 00) (±15) Working temperature -50 to ~150°C Volume Resistance (ASTM D257) 1×10¹³ Ohm-m Dielectric Breakdown Voltage (ASTM D149) 6 KV/mm (±10%) Density (ASTM D792) 3.1 g/cm³ (±10%) Elongation (ASTM D412) 50% Weight Loss (ASTM E595) less than 1% Flame Rating (UL 94) V-0 Color blue

Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability. Better than standard thermal pads? The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer. Increased service life! The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance. Versatile use! Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc.   Technical data thermal pad Dimensions (L x W x H) 120 x 20 x 1mm Thermal Conductivity (ASTM D5470) 6.2 W/mK (±10%) Hardness (ASTM D412) 50 (Shore 00) (±15) Working temperature -50 to ~150°C Volume Resistance (ASTM D257) 1×10¹³ Ohm-m Dielectric Breakdown Voltage (ASTM D149) 6 KV/mm (±10%) Density (ASTM D792) 3.1 g/cm³ (±10%) Elongation (ASTM D412) 50% Weight Loss (ASTM E595) less than 1% Flame Rating (UL 94) V-0 Color blue

<p style="text-align: justify;">Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.<br /><br /><b>Better than standard thermal pads?</b><br />The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.<br /><br /><b>Increased service life!</b><br />The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.<br /><br /><b>Versatile use!</b><br />Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>40 x 40 x 0,5mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>6.2 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D412)</td><td>50 (Shore 00) (±15)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>1×10¹³ Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>6 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.1 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>50%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>blue</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.<br /><br /><b>Better than standard thermal pads?</b><br />The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.<br /><br /><b>Increased service life!</b><br />The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.<br /><br /><b>Versatile use!</b><br />Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>40 x 40 x 1,5mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>6.2 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D412)</td><td>50 (Shore 00) (±15)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>1×10¹³ Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>6 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.1 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>50%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>blue</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.<br /><br /><b>Better than standard thermal pads?</b><br />The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.<br /><br /><b>Increased service life!</b><br />The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.<br /><br /><b>Versatile use!</b><br />Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>40 x 40 x 1mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>6.2 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D412)</td><td>50 (Shore 00) (±15)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>1×10¹³ Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>6 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.1 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>50%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>blue</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.<br /><br /><b>Better than standard thermal pads?</b><br />The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.<br /><br /><b>Increased service life!</b><br />The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.<br /><br /><b>Versatile use!</b><br />Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>40 x 40 x 2mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>6.2 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D412)</td><td>50 (Shore 00) (±15)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>1×10¹³ Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>6 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.1 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>50%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>blue</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.<br /><br /><b>Better than standard thermal pads?</b><br />The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.<br /><br /><b>Increased service life!</b><br />The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.<br /><br /><b>Versatile use!</b><br />Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>40 x 40 x 3mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>6.2 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D412)</td><td>50 (Shore 00) (±15)</td></tr><tr><td>Working temperature</td><td>-50 to ~150°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>1×10¹³ Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>6 KV/mm (±10%)</td></tr><tr><td>Density (ASTM D792)</td><td>3.1 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>50%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>blue</td></tr></table><br></p>

<p style="text-align: justify;">Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.<br /><br /><b>Better than standard thermal pads?</b><br />The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.<br /><br /><b>Increased service life!</b><br />The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.<br /><br /><b>Versatile use!</b><br />Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc.<p> </p><table><tr><td colspan="2" style="text-align: left"><b>Technical data thermal pad</b></td></tr><tr><td>Dimensions (L x W x H)</td><td>100 x 100 x 0,5mm</td></tr><tr><td>Thermal Conductivity (ASTM D5470)</td><td>9.0 W/mK (±10%)</td></tr><tr><td>Hardness (ASTM D2240)</td><td>50 (Shore 00) (±15)</td></tr><tr><td>Working temperature</td><td>-50 to ~180°C</td></tr><tr><td>Volume Resistance (ASTM D257)</td><td>1×10¹² Ohm-m</td></tr><tr><td>Dielectric Breakdown Voltage (ASTM D149)</td><td>≥8 KV/mm</td></tr><tr><td>Density (ASTM D792)</td><td>3.2 g/cm³ (±10%)</td></tr><tr><td>Elongation (ASTM D412)</td><td>40%</td></tr><tr><td>Weight Loss (ASTM E595)</td><td>less than 1%</td></tr><tr><td>Flame Rating (UL 94)</td><td>V-0</td></tr><tr><td>Color</td><td>pink</td></tr></table><br></p>