<div> Seda USB 3.0-poolse pistikupesa adapterit saab ühendada oma põhiplaadi vabale USB 3.0-poolse pistikupesa isendile, et laiendada oma süsteemi sisemiselt kahe USB 3.0-A pordi võrra. Nii saate ühendada näiteks USB-mälupulga või USB-WLAN-pulga. Kuna USB 3.0-A liides ühildub oma eelkäijatega USB 2.0 ja USB 1.1, saate kasutada oma olemasolevaid USB-seadmeid.</div> <div> </div> <div> </div> <div> Spetsifikatsioon</div> <div> Liitmik: 2 x USB 3.0-A ühendusliides: USB 3.0 pin header 19 pin female > 2 x USB 3.0-A female</div> <div> Otseühenduseks põhiplaadil</div> <div> USB-pordi suund: paralleelne (horisontaalne)</div> <div> </div> <div> Süsteeminõuded</div> <div> Põhiplaat, millel on vaba 19-pooluseline USB 3.0 pistikühendus</div> <div> </div> <div> Pakendi sisu</div> <div> Adapter USB 3.0 viiguga pistikupesa > 2 x USB 3.0 pesa > 2 x USB 3.0 pesa</div>
<div> Selle Delocki adapteri abil saab sülearvuti laadimiseks kasutada USB Type-C™ kaablit. Tänu 90° nurgale välditakse kaabli painutamist ja tänu väikestele mõõtmetele on adapter ideaalne kaaslane teel olles.</div> <div> </div> <div> USB Type-C™ port</div> <div> USB Type-C™ pesa abil saab sülearvuti laadimiseks kasutada mis tahes USB-C™ laadimiskaablit. Adapter on praktiline täiendus liikuvas töös, kuna ei ole vaja sülearvutile spetsiifilist laadimiskaablit.</div> <div> </div> <div> </div> <div> Spetsifikatsioon</div> <div> Ühendused:</div> <div> 1 x USB Type-C™ emane</div> <div> 1 x Dell 4,5 x 3,0 mm isasliides</div> <div> Värv: must</div> <div> Pinge: 19,5 V</div> <div> Väljundvool: 3 A</div> <div> Mõõtmed (LxSxK): ca. 38,0 x 33,4 x 10,0 mm</div> <div> </div> <div> Süsteeminõuded</div> <div> Vaba Delli 4,5 x 3,0 mm emasport</div> <div> USB Type-C™ laadimiskaabel</div> <div> USB-PD toiteallikas min. 60 W (19,5 V / 3 A)</div> <div> </div> <div> Pakendi sisu</div> <div> USB-C™ ja Dell adapter</div>
<div> Selle Delocki adapteri abil saab sülearvuti laadimiseks kasutada USB Type-C™ kaablit. Tänu 90° nurgale välditakse kaabli painutamist ja tänu väikestele mõõtmetele on adapter ideaalne kaaslane teel olles.</div> <div> </div> <div> USB Type-C™ port</div> <div> USB Type-C™ pesa abil saab sülearvuti laadimiseks kasutada mis tahes USB-C™ laadimiskaablit. Adapter on praktiline täiendus liikuvas töös, kuna ei ole vaja sülearvutile spetsiifilist laadimiskaablit.</div> <div> </div> <div> </div> <div> Spetsifikatsioon</div> <div> Ühendused:</div> <div> 1 x USB Type-C™ emane</div> <div> 1 x Samsung 5,5 x 3,0 mm isasjuhe</div> <div> Värv: must</div> <div> Pinge: 19 V</div> <div> Väljundvool: 3 A</div> <div> Mõõtmed (LxSxK): ca. 38,0 x 33,4 x 10,0 mm</div> <div> </div> <div> Süsteeminõuded</div> <div> Vaba Samsungi 5,5 x 3,0 mm emasport</div> <div> USB Type-C™ laadimiskaabel</div> <div> USB-PD toiteallikas min. 60 W (19 V / 3 A)</div> <div> </div> <div> Pakendi sisu</div> <div> USB-C™ ja Samsungi adapter</div>
Tootekood: AK-CBUB38-40BKGTIN: 4710614538795USB cables and adapters
If you have a modern case with USB 3.1 device connectivity but your motherboard lacks the appropriate internal USB 3.0 header, this adapter can help you make full use of your case ports. With the approximately 40 cm long black cable from Akasa, you can convert the mainboard’s connector (USB 3.1, 19-pin, male) into a USB 3.0 connector (19-pin, male). Additionally, you can attach another cable to a USB 2.0 port to ensure backward compatibility of connected devices with USB 2.0. The cable supports the maximum possible transfer rates of up to 5 Gbit/s via USB 3.0. Technical details: Cable length: approx. 400 mm (including connectors) Color: Black Connections: 1x USB 3.1 internal (19-pin male) 1x USB 3.0 internal (19-pin male) 1x USB 2.0 internal (8-pin female)
<h3>Anycubic Kobra 3 Max 3D Printer</h3> <p>Anycubic Kobra 3 Max is a state-of-the-art 3D printer designed for creatives who need a large workspace, precision and speed. Thanks to its innovative technologies and smart features, the device enables even the most demanding projects, regardless of their size. It is the ideal solution for both professionals and 3D printing enthusiasts.</p> <p> (image) </p><h3>Spacious workspace</h3> <p>One of the key advantages of the Anycubic Kobra 3 Max is its huge print space of 420 x 420 x 500 mm. It allows the creation of large models in a single run, eliminating the need to combine smaller parts. This is perfect for those doing architectural projects, industrial prototypes or decorative elements.</p> <p> (image) </p><h3>Unmatched speed and performance</h3> <p>The printer achieves a maximum print speed of 600 mm/sec, which, combined with acceleration up to 10,000 mm/sec², significantly reduces project turnaround time. The advanced LeviQ 3.0 system enables automatic leveling of the work table, and the Anti-Step Lost function prevents layers from skipping, resulting in exceptionally precise and stable prints.</p> <p> (image) </p><h3>Precision at every stage</h3> <p>The Cobra 3 Max is equipped with a quick-connect Hotend, enabling printing at temperatures up to 300°C. The hotplate heats up to 90°C in just 125 seconds, speeding up the start of work. Thanks to the improved location of the filament cutter and an anti-entanglement system, users can focus solely on completing their projects.</p> <p> (image) </p><h3>Spacious</h3> <p>The printer uses advanced systems such as resonance compensation and dynamic flow, which eliminates vibration and provides even greater printing accuracy. Two Y-axis motors with double core shafts and SG15 bearings eliminate layer misalignment, and a Z-axis motor with a double screw increases design stability.</p> <p> (image) </p><h3>Automation and safety</h3> <p>With artificial intelligence tangle detection, the Kobra 3 Max immediately stops printing if there is a problem with the filament.</p> <p> (image) </p><h3>Easy operation and software support</h3> <p>Anycubic Kobra 3 Max works with the intuitive Anycubic Slicer Next, based on the Orca platform. The Anycubic APP allows remote control, real-time progress monitoring and time-lapse photography. In addition, LAN mode and Wi-Fi support make it easy to integrate into a home or business network.</p> <p> (image) </p> <h3>Included</h3> <ul class="list-disc pl-5"><li>Printer frame</li><li>Base housing</li><li>Print head</li><li>Touchscreen</li><li>Spool holder</li><li>Cable holder</li><li>Set 1- For mounting the frame</li><li>Kit 2 - For mounting the support rods</li><li>Kit 3 - For printhead cable</li><li>Kit 4 - For printhead installation</li><li>Kit 5 - For screen installation</li><li>Kit 6 - For installation of spool holder</li><li>Power cord (2 pcs)</li><li>Cable organizer (6 pcs)</li><li>USB drive (1 pc.)</li><li>Filament tube (1 pc.)</li><li>Allen wrench set</li><li>Test filament</li><li>Nozzle cleaning tool</li><li>Lubricant</li><li>Set of wrenches</li><li>Support rod</li></ul> <div class="table-wrapper"> <p> </p> <h3></h3> <table> <tbody> <tr><th>Manufacturer</th><td>Anycubic</td></tr><tr><th>Model</th><td>KB3M-IP-O</td></tr><tr><th>Printing volume</th><td>420*420*500mm</td></tr><tr><th>Touch screen</th><td>4.3-inch</td></tr><tr><th>Maximum print speed</th><td>600mm/second</td></tr><tr><th>Maximum acceleration</th><td>10000mm/s²</td></tr><tr><th>Nozzle diameter</th><td>0.4mm (0.2/0.6/0.8mm available)</td></tr><tr><th>Auto-leveling</th><td>LeviQ3.0 Auto-leveling</td></tr><tr><th>Benchy printing</th><td>17 min 18 min</td></tr><tr><th>Noise</th><td>60dB (standard mode)</td></tr><tr><th>X axis motors</th><td>Dual core shaft + SG15 bearing</td></tr><tr><th>Y axis motors</th><td>Dual core shaft + SG15 bearing + Dual motor</td></tr><tr><th>Z axis motors</th><td>Double motor double screw</td></tr><tr><th>Maximum nozzle temperature</th><td>300°C</td></tr><tr><th>Maximum hotplate temperature</th><td>90°C</td></tr><tr><th>Belt tension</th><td>Automatic</td></tr><tr><th>Quick-connect hotend</th><td>Yes</td></tr><tr><th>LAN mode</th><td>Support</td></tr><tr><th>WiFi</th><td>Support</td></tr><tr><th>Application control</th><td>Support</td></tr><tr><th>Cutting software</th><td>Anycubic Slicer Next, external</td></tr><tr><th>Automatic resume</th><td>Support</td></tr><tr><th>AI detection</th><td>AI spaghettification detection, Object skipping (requires camera)</td></tr><tr><th>Resonance Compensation</th><td>Support</td></tr><tr><th>Dynamic flow compen</th><td>Support</td></tr><tr><th>Device weight</th><td>19 kg</td></tr><tr><th>Device dimensions</th><td>706 x 640 x 753 mm</td></tr><tr><th>Printing speed</th><td>Recommended speed 300 mm/s; maximum speed 600 mm/s</td></tr><tr><th>Construction platform</th><td>PEI spring steel</td></tr><tr><th>Material</th><td>Kobra 3 Max supports PLA, PETG, ABS and TPU</td></tr><tr><th>Power supply</th><td>300W</td></tr><tr><th>Connection method</th><td>Wi-Fi, AC Cloud, local network</td></tr><tr><th>Cooling fan rotation</th><td>7000 RPM.</td></tr> </tbody> </table> </div>
Tootekood: ADM2-CMGTIN: 8595247908230Disk drive docks and cases
Compact AXAGON ADM2-CM M.2 adapter with USB 10Gbps interface designed for easy use of M.2 NVMe or SATA SSDs. Reliable connection to a computer is possible thanks to a fixed USB-C cable with a length of 10 cm. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The universal M.2 adapter also supports other modern features such as. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about which type of M.2 drive the adapter is designed for, it simply reads all types. Another advantage of the adapter is the ability to insert the disc into the adapter slot very quickly. Changing discs is also easy. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for testing disks, transferring, backing up and restoring data, etc. Thanks to its small size, it can be readily at hand at any time. The adapter does not prevent heat dissipation from the disk, this prolongs its lifetime and also prevents the disk from slowing down the speed of the disk, so-called. Thermal Throttling. This USB-C to M.2 drive adapter can be used with computers and laptops as well as mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C male. Compatible with USB 3.2 Gen 1, USB4 a Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support for M.2 drive sizes - no length restrictions. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Other data: Adapter dimensions 55 x 37 x 12 mm. Adapter weight 19 g. USB-C male cable length 10 cm. Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: M.2 adapter with 10 cm fixed cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with hanging hole.
Tootekood: ADSA-1S6GTIN: 8595247903075Disk drive docks and cases
A compact AXAGON ADSA-1S6 SLIMport6 high-speed adapter with USB 3.0 and SATA 6G interface intended for easy connection of SSD or 2.5" SATA disk. A handy tool to quickly connect a SSD or laptop disk, including boot support. The UASP support significantly increases transmission rates especially when working with small files in the queue. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports spinning down of connected disks as well as an adapter. The installation can be handled even by a layman - the disk connects to the adapter and the adapter to the computer's USB port; the rest is done automatically. Minimum dimensions and weight, along with an enclosed disc case, make the product ideally suited even for mobile use. Features: Compatible with USB 3.0 and backward compatible with USB 2.0. Supports transmission rates 12 / 480 / 5000 Mb/s (low / full / high speed). Supports 2.5" SATA III / II / I disks of all capacities. Compliant with Serial ATA 3.1 specification (SATA/600), transmission rates of up to 6 Gb/s. Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB 3.0 interface used (theor. 5 Gbit/s). Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport). Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 22 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB 3.0 micro B female connector. USB 3.0 cable USB 3.0 Type A male / USB 3.0 Type B male 10 cm long is included. Supplying the power via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Compact adapter dimensions 70 x 21 x 10 mm. Adapter weight only 11 g, weight of USB cable 18 g. Simple plastic case holds 2.5" disk max. 9.5 mm high with USB adapter connected (USB cable is led out through hole in the case). For thin 7mm SSDs/HDDs foam pads are included for better fit in the case. The case can also serve to transport or store the adapter itself without the disk, with the USB cable inside the case. Case dimensions 122 x 78 x 19 mm. Case weight 40 g. Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains:USB 3.0 - SATA 6G adapter,USB 3.0 cable 10 cm,plastic case for 2.5" disk and USB adapter,foam pads for 7 mm HDDs and SSDs,printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,Packed in a cardboard box.
<p>The <strong>AXAGON PCEU-232RS</strong> PCI-Express card adds <strong>four USB 5Gbps ports to your desktop computer</strong>. The card is designed for fast data transfers at speed up to 5 Gb/s.</p> <p><strong>Two USB-A ports</strong> are taken out to the bracket. You can connect two different USB devices such as printers, keyboards, card readers, flash drives, external HDDs, etc. <strong>Another two ports</strong> (in the form of an internal USB 5Gbps 19pin connector) are integrated on the card board. This allows connection of an internal USB reader or connection of the front USB ports of a PC case. </p> <p>Reliable power supply of the card is provided from the computer power supply via the <strong>SATA power connector</strong>. The USB controller is equipped with a renowned <strong>Renesas</strong> company chipset with proven seamless compatibility and <strong>UASP support</strong>. </p> <p>The package contains a <strong>low-profile bracket</strong> for mounting the adapter into low profile cases.</p> <p><strong>Input:</strong><br /> PCI-Express 2.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.1. / 3.0 / 4.0.<br /> Number of 1-Lane lines (x1), compatible with x1 / x4 / x8 / x16 PCIe slots.<br /> A bandwidth of 1-Lane PCI-Express 2.0 bus up to 5 Gb/s.</p> <p><strong>Input (power supply):</strong><br /> SATA 15-pin male power connector.</p> <p><strong>Output:</strong><br /> 2x external USB 5Gbps port with USB A-F connectors. <br /> 19-pin internal USB 5Gbps connector with two ports used for example to connect an internal USB reader or the front USB ports of a PC case. <br /> USB - USB 5Gbps interface - before USB 3.2 Gen 1 / USB 3.0.<br /> Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1.<br /> Supports transmission rates 5000 / 480 / 12 / 1.5 Mb/s.<br /> When connected to a PCI-Express bus version 1.0, theor. transmission rate max. 2500 Mb/s. </p> <p><strong>Other features:</strong><br /> Full Plug and Play support.<br /> Supports concurrent activity of SuperSpeed USB, USB 2.0 and USB 1.1 devices. <br /> Compliant with the final official xHCI specification revision 1.0 by USB-IF.<br /> Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. <br /> Fully supports Hot Plug connecting and disconnecting of USB devices while running.<br /> Internal SATA power connector for powering the controller from the PC power supply.<br /> Renesas PD720201 chipset is used.</p> <p><strong>Supported operating systems:</strong><br /> MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.31 and above. <br /> Note: Drivers are only installed for Windows XP / Vista / 7. For Linux, Windows 8 / 8.1 / 10 / 11, Server 2012 / 2016 / 2019 / 2022 and later versions, no external drivers are required, they are already part of the operating system. </p> <p><strong>Package contains:</strong><br /> PCI-Express card with a standard bracket,<br /> low profile bracket,<br /> multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA,<br /> packed in a cardboard box.</p>
The AXAGON PCEU-232RS PCI-Express card adds four USB 5Gbps ports to your desktop computer. The card is designed for fast data transfers at speed up to 5 Gb/s. Two USB-A ports are taken out to the bracket. You can connect two different USB devices such as printers, keyboards, card readers, flash drives, external HDDs, etc. Another two ports (in the form of an internal USB 5Gbps 19pin connector) are integrated on the card board. This allows connection of an internal USB reader or connection of the front USB ports of a PC case. Reliable power supply of the card is provided from the computer power supply via the SATA power connector. The USB controller is equipped with a renowned Renesas company chipset with proven seamless compatibility and UASP support. The package contains a low-profile bracket for mounting the adapter into low profile cases. Input: PCI-Express 2.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.1. / 3.0 / 4.0. Number of 1-Lane lines (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. A bandwidth of 1-Lane PCI-Express 2.0 bus up to 5 Gb/s. Input (power supply): SATA 15-pin male power connector. Output: 2x external USB 5Gbps port with USB A-F connectors. 19-pin internal USB 5Gbps connector with two ports used for example to connect an internal USB reader or the front USB ports of a PC case. USB - USB 5Gbps interface - before USB 3.2 Gen 1 / USB 3.0. Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1. Supports transmission rates 5000 / 480 / 12 / 1.5 Mb/s. When connected to a PCI-Express bus version 1.0, theor. transmission rate max. 2500 Mb/s. Other features: Full Plug and Play support. Supports concurrent activity of SuperSpeed USB, USB 2.0 and USB 1.1 devices. Compliant with the final official xHCI specification revision 1.0 by USB-IF. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Fully supports Hot Plug connecting and disconnecting of USB devices while running. Internal SATA power connector for powering the controller from the PC power supply. Renesas PD720201 chipset is used. Supported operating systems: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.31 and above. Note: Drivers are only installed for Windows XP / Vista / 7. For Linux, Windows 8 / 8.1 / 10 / 11, Server 2012 / 2016 / 2019 / 2022 and later versions, no external drivers are required, they are already part of the operating system. Package contains: PCI-Express card with a standard bracket, low profile bracket, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.
Tootekood: ADSA-FPXGTIN: 8595247908636Data cables and adapters
The AXAGON ADSA-FPX FAST PORT X universal adapter with USB-C 10Gbps and SATA 6G interface is designed to easily connect a 2.5" / 3.5" SATA hard drive or SSD to your computer. Thanks to the fast USB 3.2 Gen 2 interface with the transmission rate of up to 10 Gb/s, the speed of 2.5" SSDs is not limited and is approximately 20% faster than USB 3.2 Gen 1 (USB 3.0) adapters or boxes. In the package you will find a USB-C USB-C cable 60 cm with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Also included is a 12V/2A (24W) power adapter for powering 3.5" hard drives. The adapter with a 2.5" SSD/HDD just needs to be powered over the USB bus, so there is no need to manipulate the AC adapter. The USB to SATA reduction also supports all important features for seamless operation with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the reduction, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 480Mbps, USB 5Gbps, USB 20Gbps, USB4 and Thunderbolt 3/4. Device support: 2.5" SSDs/HDDs, 3.5" HDDs, SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD), SATA III - 6 Gb/s (600 MB/s) interface, max. disk capacity - all without limit. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the SATA interface used (theor. 6 Gbit/s). Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transfer in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Connection via USB 3.2 Gen 2 type C female connector. Cable USB type C male / USB type C male 60 cm long and reduction USB type C female / USB type A male included in the package. Adapter dimensions 14 x 72 x 29 mm (H x W x D). Adapter weight 19 g (without cable, without disk, without adapter). Power supply: Power supply via USB bus up to 900mA from one USB port is sufficient for 2.5" HDD/SSD. To power the adapter with a 3.5" drive, a compact external AC/DC adapter 12V - 2A (24W) with a 150 cm long cable is included. AC adapter dimensions 65 x 65 x 40 mm (including fork). Weight of AC adapter 102 g (incl. power cord). Supported OS: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Windows Server 2008 R2 / 2012 / 2016 / 2019 / 2022 / 2025 and later. Package contains: USB-C 10 Gbps - SATA adapter, cable USB-C USB-C 60 cm + USB-C -> USB-A reduction, AC adapter 100-240V / 12V-2A, multilingual guide CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.
Wall Charger OnCharge 200 Fast, reliable, and designed for modern life, the OnCharge 200 Wall Charger delivers power exactly when you need it. Whether you need to charge your smartphone, tablet, or another USB(C) device, 20W of total power ensures your gadgets are ready in record time. With PD Fast Charging, your devices charge up to 3× faster than standard adapters, reducing wait times and keeping you connected. The PPS (Programmable Power Supply) technology dynamically adjusts voltage and current to optimize charging speed while keeping heat low and efficiency high. Built for safety and durability, the OnCharge 200 includes multiple layers of protection against over-voltage, overheating, overcurrent, and short circuits. Every charge offers peace of mind. Compact, lightweight, and equipped with an EU plug, this charger is ideal for travel and everyday use. Just plug in, power up, and enjoy top-tier charging performance. Input: 100-240V~50/60Hz 0.6A Max Output: USB(C): 5.0V⎓3.0A (15.0W) or 9.0V⎓2.22A (20.0W) or 12.0V⎓1.67A (20.0W) PPS: 5.0-11.0V⎓1.8A (19.8W Max) Total Power: 20W Max EU Plug Over-Voltage, Overheating, Overcurrent & Short-Circuit Protection PD Fast Charge USB(C) Port
Tootekood: DP-N214A5-UPALGTIN: 6933412775607Laptop stands and pads
*Ultra speed USB 3.0 pass-through connector for the fastest transfer speed;*Unique U shape design provide the most fluent cold airflow to your notebook’s hot spot;*Angle adjustable to protect your spine for your health;*Two 140mm fans covers equal areas to eight 70mm fans., Black
<h2 class="product_info_title">Description</h2> <p class="product_text">This USB pin header cable by Delock enables the connection of different USB 2.0 devices through the USB 3.0 pin header of your mainboard. The connected USB 2.0 devices will be supplied with sufficient power due to the connection to USB 3.0. Furthermore Delock offers optional pin header adapter which are suitable for the connection of standard USB devices.</p> <p> </p> <h2 class="product_info_title">Specification</h2> <p>• Suitable adapter by Delock: item 41761, 41762, 41764<br /> • Connector: USB 3.0 pin header 19 pin female > USB 2.0 pin header 8 pin male<br /> • Data transfer rate up to 480 Mb/s<br /> • Power supply up to 900 mA<br /> • Cable length ca. 30 cm<br /> • Colour: black</p> <p> </p> <h2 class="product_info_title">System requirements</h2> <p>• Mainboard with a free USB 3.0 pin header 19 pin male</p>
Tootekood: 83910GTIN: 4043619839100USB cables and adapters
This USB 3.0 cable by Delock can be connected to a free USB 3.0 pin header female port and expands the system by two USB 3.0 A male interfaces.Specification• Connector: 19 pin USB 3.0 pin header male > 2 x USB 3.0 Type-A male• Pin 20 = Key• Cable gauge: 28 AWG data line 24 AWG power line• Data transfer rate 5 Gbps• Length incl. connector: ca. 25 cm• Colour: blackSystem requirements• A free 19 pin USB 3.0 pin header female portPackage content• USB 3.0 cable
This PCI Express card by Delock expands the PC by two internal USB 3.0 pin header. Different USB devices, such as docking stations, card readers, external enclosure etc., can be connected to the card, by using an optional cable.Optional expansion of the USB portsThe PCIe card enables the expansion of the external USB ports on the front of the computer or on the slot bracket, by additional cables, slot brackets or front panels. Specification Connectors:2 x 19 pin USB 3.0 pin header male1 x PCI Express x1, V2.01 x SATA 15 pin power connectorChipset: VIA VL805Data transfer rate up to:SuperSpeed 5 Gbps,Hi-Speed 480 Mbps,Full-Speed 12 Mbps,Low-Speed 1.5 MbpsSupports xHCI specifications V1.0Supports UASP System requirements Linux Kernel 4.9.4 or aboveWindows 7/7-64/8.1/8.1-64/10/10-64PC with one free PCI Express slot Package content PCI Express cardLow profile bracketUser manual
This docking station by Delock can be connected to a computer with a USB-C™ Alt-Mode or Thunderbolt™ 3 port and provides a variety of interfaces. A display can be operated at the HDMI output. Two built-in USB Type-A ports allow the use of peripherals, and connections for gigabit network, as well as an SD card reader, complete the features. With a USB-C™ power supply, laptops such as the Macbook or Chromebook can be charged during operation. Specification• Connectors: 1 x Gigabit LAN 10/100/1000 Mbps RJ45 jack 1 x HDMI-A 19 pin female 1 x USB Type-C™ PD female (power supply) 2 x USB 3.0 Type-A female 1 x SD / SDHC / SDXC / MMC slot 1 x USB Type-C™ male• Chipset: VL813, VL100, GL857L, PS176, RTL8153• Resolution up to 3840 x 2160 @ 30 Hz (depending on the system and the connected hardware)• Transmission of audio and video signals• Output power: 4.5 W per port (5 V / 0.9 A)• Input power: 1 x USB Type-C™ female max. 60 W (20 V / 3 A)• Metal housing• Cable length incl. connector: ca. 15 cm• Colour: anthracite• Dimensions (LxWxH): ca. 116 x 46 x 16 mm System requirements• Chrome OS• Linux Kernel 4.9 or above• Mac OS 10.12 or above• Windows 7/7-64/8.1/8.1-64/10/10-64• Windows 10 Mobile• Device with a free USB Type-C™ port and DisplayPort alternate mode or with a free Thunderbolt™ 3 port Package content• USB-C™ docking station• User manual
