Kõik hinnakirjad

Active extension AXAGON ADR-305 USB 3.2 Gen 1 cable 5 m long. Ideal for connecting your computer to a USB device such as a mouse, keyboard, webcam, printer, scanner, plotter and others. The active USB repeater cable strengthens the passing USB signal and allows you to connect a significantly more distant USB device than the usual 5 meters when passive cables are used. The range of the cable can be further extended by using several cables in a row. Thanks to the used USB 3.2 Gen 1 (formerly USB 3.0) interface, you can enjoy a data transfer speed of up to 5 Gbps. So, you can use the cable for devices that require higher speed, such as backup systems, NAS data storage and others. A great advantage of the ADR-305 extension is an integrated auxiliary power supply connector. In most cases, USB bus power is sufficient, but for devices with larger power consumption the USB power supply may be inadequate and auxiliary power from the mains may resolve the problem. The remarkably compact body of the AXAGON repeater allows for trouble-free use in electrical installation strips or cable systems. The use of a high-quality shielded cable ensures high communication speed and minimal undesirable interference. Input: USB 3.2 Gen 1 for connection to a computer USB Type A (M) male connector Output: USB 3.2 Gen 1 for connecting a remote USB device USB Type A (F) female connector transmission rate 5000 / 480 / 12 / 1.5 Mbit/s (super / high / full / low speed) Power supply: Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required. The active part of the cable includes a Micro USB connector for additional external power supply of 5V/1-2 A. The power cable USB A-M / Micro USB, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-DS16. When powering the repeater cable with the power adapter, an external 2.5" disk can be connected without the need for own power supply to the disk. For longer USB route with multiple repeater cables connected in a row, the USB bus supply may be inadequate for USB devices with lower power consumption than an external 2.5" drive. Also, in this case it can help to boost the power supply by connecting a power adapter. Other features: Fully compatible with USB 3.2 Gen 1 (USB 3.0) and backward compatible with USB 2.0 and USB 1.1. Full Plug and Play and Hot Plug support. Two LEDs indicating power and USB connection. Behind the active USB cable, a common passive USB cable can also be used. Dimensions of active part with are 75 x 24 x 13mm, cable length 5 m. Weight 208 g. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.6.x kernel and higher. Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 A-M > A-F active repeater 5 m long, USB-A / Micro USB power cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Icy Dock präsentiert mit dem MB991U3-1SB voller Stolz die erste externe Version der ToughArmor Familie. Das MB991U3-1SB ist ein externes 2,5” SATA 6GBit/s zu USB 3.0 HDD/SSD Gehäuse das komplett aus Metall gefertigt wird und Qualität auf Enterprise-Level bietet. Der entnehmbare EZ-Slide Mini-Tray, der auch Hot Swap unterstützt, erlaubt es Nutzern schnell und einfach, 2,5"-SATA Festplatten oder SSDs auszutauschen, ohne ihr System oder Gerät ausschalten zu müssen, wodurch wertvolle Zeit gespart wird. Der EZ-Slide Mini-Tray nimmt die meisten der am Markt erhältlichen 2,5" SATA HDDs / SSDs von 5 mm bis 15 mm Bauhöhe auf. Der Laufwerksschacht wurde so entwickelt, dass eine Vielzahl verschiedener ToughArmor Trays aufgenommen werden können, was Anwendern jederzeit und überall eine optimale Kompatibilität zu ihren internen ToughArmor Lösungen bietet. Das USB-Interface erlaubt besonders schnelle Übertragungsraten und ist abwärtskompatibel zu USB 2.0, wodurch die Kompatibilität zu möglichst vielen Systemen sichergestellt wird. Das ToughArmor MB991U3-1SB kombiniert die Vorteile eines tragbaren Gehäuses mit Enterprise-Level Features. Es ist das ideale Gehäuse für Speicheranwendungen in Unternehmen wie KMU Backup-Lösungen, Datenrettung, Videoarchivierung, Datentransport und IT Profis.

2. 5" kõvaketta korpus, kohandatav 9.5 mm ja 12.5 mm, toetab sata ja usb 3.0 ühendusi kiireks andmeedastuseks, saadaval musta värvi, ideaalne salvestusruumi laiendamiseks ja m

SEAGATE BASIC HDD USB3 4TB Take on your day with simple, reliable backup. Simple, compact, and PC compatible, Seagate Basic portаble drive gives you additional on-the-go storage and lets you take along large files when you travel. + Leverage simple drag-and-drop usability + Expand your computer’s capacity with a lightweight, compact solution + Take advantage of instant plug-and-play PC compatibility + Transfer files fast with USB 3.0, backward-compatible with USB 2.0 Set-up for PCs is simple and straightforward: simply connect a single USB cable and you are ready to go. The drive is powered from the USB cable, so there is no need for an external power supply. And, it is automatically recognised by the Windows 1,2 operating system, so there is no software to install and nothing to configure. Just connect and take advantage of the fast data transfer speeds with the USB 3.0 interface by connecting to a SuperSpeed USB 3.0 port.

A-Data HD650 2.5" 1TB, USB 3.0

The HD650 combines state-of-the-art materials with precise engineering to create an external storage solution that features improved ruggedness and data safety. The drive utilizes an ultra-fast USB 3.0 interface for improved transfer speed, and an azure LED indicates power and transfer status. Its flowing lines and striking colors make it a great looking storage option for valuable files, especially for people with active and outdoor lifestyles.

The HD650 combines state-of-the-art materials with precise engineering to create an external storage solution that features improved ruggedness and data safety. The drive utilizes an ultra-fast USB 3.0 interface for improved transfer speed, and an azure LED indicates power and transfer status. Its flowing lines and striking colors make it a great looking storage option for valuable files, especially for people with active and outdoor lifestyles.

Adata HD650 2.5" 1TB, USB 3.0, Punane

The HD650 combines state-of-the-art materials with precise engineering to create an external storage solution that features improved ruggedness and data safety. The drive utilizes an ultra-fast USB 3.0 interface for improved transfer speed, and an azure LED indicates power and transfer status. Its flowing lines and striking colors make it a great looking storage option for valuable files, especially for people with active and outdoor lifestyles.

The HD650 combines state-of-the-art materials with precise engineering to create an external storage solution that features improved ruggedness and data safety. The drive utilizes an ultra-fast USB 3.0 interface for improved transfer speed, and an azure LED indicates power and transfer status. Its flowing lines and striking colors make it a great looking storage option for valuable files, especially for people with active and outdoor lifestyles.

ADATA HV320 1TB USB3.0 2.5inch external 80012362 AHV320-1TU31-CBK

ADATA HV620S 4TB USB3.0 HDD 2.5i Black

Lihtne ja kaasaegne välimus; Põrutuskindel; SuperSpeed ​​USB 3.0 liides; Kriimustuskindel pind; LED indikaator näitab allalaadimise staatust

A-Data kõvaketas DashDrive HD720 1TB USB 3.0 sinine; Vee- ja põrutuskindel

A-Data kõvaketas 1TB Durable HD720 USB 3.0 must; IP68 sertifikaat: vee-, löögi- ja tolmukindel

<p data-start="75" data-end="491" class=""><strong data-start="75" data-end="164">20 W kompaktne reisitarvik Power Delivery ja Quick Charge toega – kiireks laadimiseks</strong><br data-start="164" data-end="167"> Kõik kontrolli all: kerge ja ülikompaktne akupank on ideaalne kaaslane, kui vajad liikvel olles kiiret energialaengut. Integreeritud tekstiilkaabel muutub nutikaks kanderihmaks, mis hoiab akupanga kindlalt käes. Täiuslik kottide aasade või karabiinide külge kinnitamiseks – aku on alati käepärast ja korrastatult hoiustatud.</p><p data-start="493" data-end="802" class=""><strong data-start="493" data-end="510">Alati kaasas:</strong><br data-start="510" data-end="513"> Integreeritud tekstiilkaabel ei saa ära kaduda ja muudab akupanga usaldusväärseks laadimispartneriks kõikidele USB-C™ seadmetele.<br data-start="642" data-end="645"> Kaabel kinnitub korpuse külge ja muutub praktiliseks rihmaks, mis tagab kindla haarde käes ja sobib suurepäraselt kottide või seljakottide kinnitusaasadesse.</p><p data-start="804" data-end="1149" class=""><strong data-start="804" data-end="854">Ideaalne kuni 3 seadme samaaegseks laadimiseks</strong> – 2x USB-C™ ja 1x USB-A ühendusega (kokku kuni 20 W), sobib näiteks nutitelefoni, tahvelarvuti või juhtmevabade kõrvaklappide (nt Apple AirPods) laadimiseks.<br data-start="1012" data-end="1015"> Power Delivery (USB-C™) ja Quick Charge (USB-A) võimaldavad seadmeid ja akupanka laadida kuni 4x kiiremini kui tavaliste akupankadega.</p><p data-start="1151" data-end="1373" class=""><strong data-start="1151" data-end="1176">LED-valgustusega riba</strong> näitab akupanga järelejäänud laetuse taset.<br data-start="1220" data-end="1223"> Akupanka saab laadida kas integreeritud 13 cm USB-C™ kaabliga või USB-C™ sisend/väljundi kaudu – ühendades selle näiteks USB-laadija või sülearvutiga.</p><p> </p><p data-start="1375" data-end="1527" class=""><strong data-start="1375" data-end="1403">Universaalsed USB-pordid</strong> sobivad paljude tootjate seadmetele, näiteks Samsung Galaxy, Xiaomi, Lenovo, Huawei, samuti Apple iPhone’i või iPadi jaoks.</p>

<p data-start="62" data-end="495" class=""><strong data-start="62" data-end="151">30 W kompaktne reisitarvik Power Delivery ja Quick Charge toega – kiireks laadimiseks</strong><br data-start="151" data-end="154"> Kõik alati kontrolli all: kerge ja ülikompaktne akupank on ideaalne kaaslane liikvel olles, et tagada energialaeng just siis, kui seda vajad. Integreeritud tekstiilkattega kaabel muutub nutikaks kanderihmaks, mis hoiab akupanga kindlalt käes. Täiuslik kinnitus aasade või karabiinide külge – akupank on alati käepärast ja kenasti hoiustatud.</p><p data-start="497" data-end="824" class=""><strong data-start="497" data-end="517">Alati käepärast:</strong><br data-start="517" data-end="520"> Integreeritud tekstiilkaablit ei saa kaotada ning see muudab akupanga usaldusväärseks kaaslaseks kõigi USB-C™ seadmete laadimisel liikvel olles.<br data-start="664" data-end="667"> Kaabel kinnitub korpuse küljele ja moodustab praktilise kanderihma, mis tagab kindla haarde käes ning sobib hästi seljakottide või kottide kinnitusaasadesse.</p><p data-start="826" data-end="1160" class=""><strong data-start="826" data-end="871">Ideaalne 3 seadme samaaegseks laadimiseks</strong> – 2x USB-C™ ja 1x USB-A ühendusega (maksimaalselt 30 W), sobib nt nutitelefoni, tahvelarvuti või kõrvaklappide (nt Apple AirPods) laadimiseks.<br data-start="1014" data-end="1017"> Power Delivery (USB-C™) ja Quick Charge (USB-A) võimaldavad akupanka ja ühendatud seadmeid laadida kuni 4x kiiremini kui tavalised akupangad.</p><p data-start="1162" data-end="1363" class=""><strong data-start="1162" data-end="1187">LED-valgustusega riba</strong> näitab akupanga laetuse taset.<br data-start="1218" data-end="1221"> Akupanka saab laadida integreeritud 13 cm USB-C™ kaabliga või USB-C™ sisend/väljundi kaudu, ühendades selle nt USB-laadija või sülearvutiga.</p><p> </p><p data-start="1365" data-end="1525" class=""><strong data-start="1365" data-end="1444">Universaalsete USB-portide kaudu sobib see seadmetele paljudelt tootjatelt,</strong> nt Samsung Galaxy, Xiaomi, Lenovo, Huawei, samuti Apple iPhone'i ja iPadi jaoks.</p>

Full-Throttle 75W USB-C Charging Power up rapidly with a charger that delivers up to 75W, giving you super-fast charging when you need it most. Dual-Device Power Delivery Experience rapid charging with the 45W built-in retractable cable and 30W USB-C port, perfect for powering up laptops and tablets together without slowing down. Pull, Charge, and Store Extend by pulling the retractable cable more than 2 inches. Retract swiftly with a short pull and release. Keep Your Car Organized Drive in style with a clutter-free charger that keeps your car's interior neat and orderly.Model Number: A2738Anker Nano Car Charger (75W, USB-C Port, Built-In Retractable USB-C Cable)Power Your Drive with Fast, Retractable Charging75W Max High-Speed Charging Delivering up to 75W of power, this car charger is perfect for efficcient charging on the go, whether at work or on the road. Reach Where You Need Extend your charging capabilities with the retractable cable that extends up to 29.5 inches and has been swing tested for lasting use over 12,000 cycles. Sleek and Compact Keep your charging discreet and your driving safe with a car charger that boasts an ultra-compact size, smaller than a Magic Mouse. Compatible and Safe This universal car charger provides safe, reliable charging for all your devices, backed by advanced ActiveShield 3.0 protection for peace of mind. CompatibilityFor Apple16" MacBook Pro / 14" MacBook Pro ( 2023) / 15" MacBook Air(M2, 2023)12.9" iPad Pro/ 11" iPad Pro (M2, 2021 / 2020)iPhone 16 / 15 / 14 SeriesAirPods (1st / 2nd / 3rd / 4th Gen) / AirPods Pro (1st / 2nd Gen)Apple Watch Series S10 / S9 / S8For SamsungGalaxy S24 / S23 / S22 SeriesGalaxy Tab S9 / S8 SeriesTotal Wattage: 75W MaxInput: 12V/24V=8ARetractable USB-C Cable: 5.0V=3.0A/ 9.0V=3.0A /12.0V=3.0A/15.0V=3.0A / 20.0V=2.25A / 5V-11V=3A (45.0W Max)USB-C Port: 5.0V=3.0A/ 9.0V=3.0A/ 12V=2.5A/15V=2A/5.0V-11.0V1=3.0A (30.0W Max)Dimensions: 3.94 x 1.97 x 1.14 in/100 x 50 x 50 x 29 mmWeight: 2.72 oz / 77g

<p class="desc" style="outline: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0px; padding: 0px; border: 0px; text-size-adjust: none; line-height: 1.3;">ARK-1220L</p><p class="desc" style="outline: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0px; padding: 0px; border: 0px; text-size-adjust: none; line-height: 1.3;">Intel Atom E3940 QC SoC with 4K Dual HDMI/Dual LAN/M.2 DIN-Rail Fanless Box PC</p><p class="desc" style="outline: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0px; padding: 0px; border: 0px; text-size-adjust: none; line-height: 1.3;"><br></p><p class="desc" style="outline: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0px; padding: 0px; border: 0px; text-size-adjust: none; line-height: 1.3;">Intel Atom E3940 Quad Core SoC turbo burst up to 1.8 GHz</p><p class="desc" style="outline: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0px; padding: 0px; border: 0px; text-size-adjust: none; line-height: 1.3;">DIN-Rail system with essential I/O ports on front-side bezel</p><p class="desc" style="outline: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0px; padding: 0px; border: 0px; text-size-adjust: none; line-height: 1.3;">2 x Intel GbE and 4 x USB 3.0</p><p class="desc" style="outline: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0px; padding: 0px; border: 0px; text-size-adjust: none; line-height: 1.3;">Dual HDMI display up to 4K resolution</p><p class="desc" style="outline: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0px; padding: 0px; border: 0px; text-size-adjust: none; line-height: 1.3;">1 x full-size mPCIe with SIM holder and 1 x M.2 2230 for WIFI</p><p class="desc" style="outline: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0px; padding: 0px; border: 0px; text-size-adjust: none; line-height: 1.3;">1 x 2.5” SATA III SSD and 1 x full-size mSATA*</p><p class="desc" style="outline: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0px; padding: 0px; border: 0px; text-size-adjust: none; line-height: 1.3;">12V ~ 28V wide range power input</p><p class="desc" style="outline: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0px; padding: 0px; border: 0px; text-size-adjust: none; line-height: 1.3;">Advantech WISE-PaaS support</p>

<div class="tab-pane fade active show" id="ESpec"> <div class="px-3 py-4 p-sm-4"> <dl class="row"> <dt class="col-sm-4">Product Type</dt> <dd class="col-sm-8">Motherboard - micro ATX</dd> <dt class="col-sm-4">Chipset Type</dt> <dd class="col-sm-8">Intel B860</dd> <dt class="col-sm-4">Processor Socket</dt> <dd class="col-sm-8">LGA1851 Socket</dd> <dt class="col-sm-4">Max Processors Qty</dt> <dd class="col-sm-8">1</dd> <dt class="col-sm-4">Compatible Processors</dt> <dd class="col-sm-8">(supports Intel Core Ultra processors (Series 2))</dd> <dt class="col-sm-4">Max Size</dt> <dd class="col-sm-8">256 GB</dd> <dt class="col-sm-4">Technology</dt> <dd class="col-sm-8">DDR5</dd> <dt class="col-sm-4">Bus Clock</dt> <dd class="col-sm-8">8666 MHz (O.C.), 5600 MHz, 6800 MHz (O.C.), 6533 MHz (O.C.), 4800 MHz, 5600 MHz (O.C.), 4400 MHz</dd> <dt class="col-sm-4">Supported RAM Integrity Check</dt> <dd class="col-sm-8">Non-ECC</dd> <dt class="col-sm-4">Registered or Buffered</dt> <dd class="col-sm-8">Unbuffered, clocked unbuffered</dd> <dt class="col-sm-4">Features</dt> <dd class="col-sm-8">Dual channel memory architecture, Intel Extreme Memory Profiles (XMP) 3.0, AMD EXPO technology</dd> <dt class="col-sm-4">Type</dt> <dd class="col-sm-8">HD Audio (8-channel)</dd> <dt class="col-sm-4">Audio Codec</dt> <dd class="col-sm-8">Realtek ALC897</dd> <dt class="col-sm-4">Compliant Standards</dt> <dd class="col-sm-8">High Definition Audio</dd> <dt class="col-sm-4">Network Controller</dt> <dd class="col-sm-8">Dragon RTL8125BG</dd> <dt class="col-sm-4">Network Interfaces</dt> <dd class="col-sm-8">2.5 Gigabit Ethernet</dd> <dt class="col-sm-4">Expansion Slots</dt> <dd class="col-sm-8">1 x CPU ¦ 4 x DIMM 288-pin ¦ 1 x PCIe 5.0 x16 ¦ 1 x PCIe 4.0 x4 ¦ 1 x M.2 socket (2230 M.2 Key E slot) ¦ 2 x M.2 socket (2280 M.2 Key M slot) ¦ 1 x M.2 socket (2230/2242/2260/2280 M.2 Key M slot)</dd> <dt class="col-sm-4">Storage Interfaces</dt> <dd class="col-sm-8">SATA-600 -connectors: 4 x 7pin Serial ATA - RAID 0 / RAID 1 / RAID 10 / RAID 5 ¦ PCIe 5.0 -connectors: 1 x Blazing M.2 ¦ PCIe 4.0 -connectors: 2 x Hyper M.2</dd> <dt class="col-sm-4">Interfaces</dt> <dd class="col-sm-8">1 x USB-C 3.2 Gen2x2 ¦ 3 x USB 3.2 Gen 1 ¦ 2 x USB 2.0 ¦ 1 x LAN (2.5Gigabit Ethernet) ¦ 1 x HDMI ¦ 1 x DisplayPort ¦ 1 x audio line-in - mini-jack ¦ 1 x microphone - mini-jack ¦ 1 x audio line-out - mini-jack ¦ 2 x aerial</dd> <dt class="col-sm-4">Internal Interfaces</dt> <dd class="col-sm-8">1 x USB-C 3.2 Gen 1 - header ¦ 2 x USB 3.2 Gen 1 - header ¦ 4 x USB 2.0 - header ¦ 1 x SPI - header ¦ 1 x audio - header</dd> <dt class="col-sm-4">Power Connectors</dt> <dd class="col-sm-8">24-pin main power connector, 8-pin ATX12V connector, 4-pin ATX12V connector</dd> <dt class="col-sm-4">BIOS Type</dt> <dd class="col-sm-8">AMI</dd> <dt class="col-sm-4">BIOS Features</dt> <dd class="col-sm-8">UEFI BIOS</dd> <dt class="col-sm-4">Hardware Features</dt> <dd class="col-sm-8">Intel Hybrid Technology, Intel Turbo Boost Max Technology 3.0, Intel Adaptive Boost Technology (ABT), Intel Thermal Velocity Boost (TVB), CUDIMM support, BIOS FlashBack button, chipset heatsink, VRM heatsink design, 10+1+1+1+1 Power Phase Design, ASRock Auto Driver Installer, ASRock POST Status Checker (PSC), ASRock EZ Mode, ASRock Full HD UEFI, ASRock My Favorites in UEFI, ASRock Instant Flash, Dr.MOS MOSFET, 6 Layer PCB, M.2 heatsink, aluminium heatsink design, ASRock Polychrome RGB, DIY Friendly Design, ASRock Steel Slots</dd> <dt class="col-sm-4">Included Accessories</dt> <dd class="col-sm-8">IO shield, 1 x M.2 screw, 2 x ASRock WiFi 2.4/5/6 GHz Antennas</dd> <dt class="col-sm-4">Cables Included</dt> <dd class="col-sm-8">2 x Serial ATA cable</dd> <dt class="col-sm-4">Software Included</dt> <dd class="col-sm-8">ASRock A-Tuning, ASRock Dragon 2.5G LAN Software, ASRock Polychrome SYNC</dd> <dt class="col-sm-4">Compliant Standards</dt> <dd class="col-sm-8">FCC, ErP Ready, EuP Ready, HDCP 2.3, DisplayPort 1.4</dd> <dt class="col-sm-4">Width</dt> <dd class="col-sm-8">24.4 cm</dd> <dt class="col-sm-4">Depth</dt> <dd class="col-sm-8">24.4 cm</dd> </dl> </div> </div>

Intel B860 Express | LGA1851 | Micro-ATX | DDR5 | 8800 MHz | Memory slots 2 | 2xPCI-Express 4.0 1x | 1xPCI-Express 4.0 16x | 2xM.2 | 1xHDMI | 1xDisplayPort | 1xAudio-In | 1xAudio-Out | 1xMicrophone | 3xUSB 2.0 | 2xUSB 3.0 | 1xUSB 3.2 | 1xPS/2 | 1xRJ45 | SATA | USB-C | USB 2.0 | USB 3.2 | Serial | SATA 3.0 | Video Depending on CPU | LAN 2.5 Gigabit | Audio | RAID SATA 0, 1, 5, 10 | TPM Header

The AXAGON ACU-DPQ100 GaN travel wall charger enables fast charging of up to three mobile devices at the same time. With 100W of total power, the charger charges notebooks, phones and other mobile devices at the highest possible speed. The adapter offers a standard USB-A connector, but also two double-sided USB-C connectors. Compact size and high performance is given by the new GaN technology used. The components used with Galium Nitride work with high efficiency, which allows you to achieve high performance with a small size. The charger is equipped with two Power Delivery 3.0 / Quick Charge 4+ USB Type-C outputs and one Quick Charge 3.0 USB Type-A output, enabling fast charging of not only smartphones and tablets, but also laptops. The Quick Charge 4+ technology allows up to 4 times faster charging of phones than a standard USB charger. Power Delivery 3.0 technology not only supports charging of modern phones, but also enables 100W PD charging of powerful laptops. The charger supports 20W PD charging for iPhone 12, 13, 14 and 15 and also offers 27W PD charging for iPhone 13 Pro, 14 Pro, 15 Pro and their Pro Max models. In addition, it supports 25W SFC charging for Samsung Galaxy S20 - S24, Note and Z Fold series and also offers 45W SFC 2.0 charging for Samsung Galaxy S20 - S24 Ultra, Tab S7+ - S9+, Tab S8 - S9 Ultra. The adapter is also compatible with other fast phone charging standards such as Apple iPhone, iPad, Samsung, Huawei, Honor, Xiaomi. The main advantage of the power adapter is the Power Delivery 3.0 standard for charging Apple MacBook, Lenovo, Asus, HP, Dell and other laptops. You can charge your laptop directly or with the increasingly popular docking stations and port replicators. The advanced protection system at the charging adapter output protects the device being charged from damage. The charger function also detects the device being charged and selects the optimal charging speed and progress. The body of the power adapter has a pleasant shape and size. Compared to classic charging adapters with the same parameters, the size of this charger is up to half the size. The combination of small dimensions, achieved with GaN technology and a wide range of input voltages, makes the charger an ideal travel helper. Input: input voltage AC 100V-240V / 2A / 50-60 Hz (WIV function) supports multiple national power standards two-pin euro plug - integrated in the body of the charger Outputs: USB-A port QC (phones) max. 30W: 4.5V/5A, 5V/3A, 9V/3A, 12V/2.5A, 20V/1.5A Charging technology: QC 3.0, QC 2.0, AFC, SCP, FCP, PE+, SMART, Apple 2.4A USB-C port PD2 (phones) max. 65W: 5V/3A, 9V/3A, 12V/2.5A, 15V/3A, 20V/3.25A, PPS: 3.3-11V/3A Charging technology: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, SFC 2.0, SFC, AFC, SCP, FCP, PE+, SMART, Apple PD USB-C port PD1 (laptops, phones) max. 100W: 5V/3A, 9V/3A, 12V/2.5A, 15V/3A, 20V/5A, PPS: 3.3-11V/5A Charging technology: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, SFC 2.0, SFC, AFC, SCP, FCP, PE+, SMART, Apple PD Maximum performance using multiple ports: maximum power QC + PD2 15W, SMART mode charging is used (max. 5V/3A) maximum power QC + PD1 83W maximum power PD1 + PD2 85W maximum power QC + PD1 + PD2 80W total maximum power 100W total maximum current 5A Supported charging technologies: Standard charging of all devices that support 5V and Apple iPhone 5, 6, SE, 7 charging. SMART - charging max. 5V/3A, Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A) and Apple 2.4A (iPad). PE+ - quick charging using MediaTek Pump Express+ and Pump Express+ 2.0 protocol. FCP - quick charging of devices that support Huawei Fast Charge Protocol. SCP - quick charging (up to 40W) using the Huawei SuperCharge Protocol. AFC - quick charging using the Samsung Adaptive Fast Charging protocol. SFC - quick charging using Samsung Super Fast Charging and Super Fast Charging 2.0 protocol. QC - quick charging using the Qualcomm Quick Charge 2.0, Quick Charge 3.0 and Quick Charge 4+ protocol. PPS - quick charging using the Programmable Power Supply protocol (part of USB PD 3.0 and QC4+). PD - quick charging using USB Power Delivery 2.0 and Power Delivery 3.0 protocol. Examples of supported phones, tablets and laptops: SFC - quick charging (up to 25W) of Samsung Galaxy S20, S21, S22, S23, S24 series, Note 10, 20 series, Z Fold 2, 3, 4 series. SFC 2.0 - quick charging (up to 45W) of Samsung Galaxy S20, S21, S22, S23, S24 Ultra, Tab S7+, Tab S8+, Tab S9+, Tab S8 Ultra, Tab S9 Ultra. PD - quick charging of Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max phone. PD - quick charging (up to 20W) Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 14, 14 Plus, 15, 15 Plus phone. PD - quick charging (up to 27W) Apple iPhone 13 Pro, 13 Pro Max, 14 Pro, 14 Pro Max, 15 Pro, 15 Pro Max phone. PD - quick charging (up to 100W) ofLenovo, HP, Dell, Acer, Asus, Apple MacBook Air, MacBook Pro, iPad mini, iPad Air, iPad Pro and others notebooks. The charger supports WIV, AIC and CC functions: Wide Input Voltage - function of a wide range of input voltage; it protects the adapter against undervoltage and overvoltage at the input and allows the use of more national power standards. Automatic Intelligent Communication - function of automatic recognition of the connected device to select optimal charging parameters. Constant Output Current - the current hold function prevents the output power fluctuations; this function ensures steady course of charging. Complex output protection: OCP, OVP, OTP, OSP: Over Current Protection. Protection of output against current overload. Over Voltage Protection. Protection against overvoltage at the output. Over Temperature Protection. Protection against overheating of the adapter. Output Short Circuit protection. Short circuit protection at the output. Other features: dimensions of the charger body 115 x 60 x 32 mm including a plug, weight: 242 g, material: non-flammable plastic. Package contains: black wall charger, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Compact travel wall charger AXAGON ACU-DPQ65 GaN for fast charging of up to three mobile devices at a time. With 65W of total power, the charger charges notebooks, phones and other mobile devices at the highest possible speed. The adapter offers a standard USB-A connector, but also two double-sided USB-C connectors. Ultra compact size and high performance is given by the new GaN technology used. The components used with Galium Nitride work with high efficiency, which allows you to achieve high performance with a small size. Two Power Delivery 3.0 / Quick Charge 4+ USB type C outputs and one Quick Charge 3.0 USB type A output allow fast charging of smartphones and tablets but also charging of laptops. The charger is compatible with fast charging standards for Apple iPhones, iPads, Samsung, Huawei, Honor, Xiaomi, as well as PD charging for Lenovo, HP, Dell and other notebooks. The Quick Charge 4+ technology allows up to 4 times faster charging of phones than a standard USB charger. The Power Delivery 3.0 technology provides support for modern phones, but also for charging modern laptops. The AIC function recognizes the connected device and automatically selects the optimal charging speed, while the CC function ensures steady course of charging. WIV function works with wide range of input voltages, it protects the adapter against undervoltage and input overvoltage, and allows the use of multiple "national power supply standards". The advanced protection system at the charging adapter output protects the device being charged from damage. The body of the power adapter has a pleasant shape and size. Compared to classic charging adapters with same parameters, the size of the charger is a third to a half smaller. The combination of small dimensions, achieved with GaN technology and a wide range of input voltages, makes the charger an ideal travel helper. The operation of the charger is indicated by an elegant white LED that does not dazzle. Input: input voltage AC 100V-240V / 50-60 Hz (WIV function) supports multiple national power standards two-pin euro plug - integrated in the body of the charger Outputs: three outputs 1x USB type A port QC (phones): Quick Charge 3.0 - 4.5V/5A, 5V/4.5A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A 1x USB type C port PD2 (phones): Power Delivery 3.0 - 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A 1x USB type C port PD1 (notebooks, phones): Power Delivery 3.0 - 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A QC port maximum power 30W PD2 port maximum power 33W PD1 port maximum power 65W QC + PD1 maximum power 63W QC + PD2 maximum power 24W PD1 + PD2 maximum power 63W QC + PD1 + PD2 maximum power 60W total maximum power 65W total maximum current 5A Supported charging technologies: USB type A port QC (max. 30W): Fast charging QC2.0, QC3.0, AFC, FCP, SCP, PE+, SMART charging max. 5V/4.5A USB type C ports PD1 (max. 65W) and PD2 (max. 33W): Fast charging PD 2.0, PD 3.0, QC2.0, QC3.0, QC4+, AFC, FCP, PE+, PSS 3.3-11V/3A, SMART charging max. 5V/3A, Apple fast charging The charger charges devices with the following technologies: Standard charging of all devices that support 5V and Apple iPhone 5, 6, SE, 7 charging. Smart 5V/4.5A Qualcomm Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A) and Apple 2.4A (iPad). QC - quick charging of devices that support Qualcomm Quick Charge 2.0, Quick Charge 3.0 and Quick Charge 4+. AFC - quick charging of devices that support Samsung Adaptive Fast Charging. FCP - quick charging of devices that support Huawei Fast Charge Protocol. SCP - quick charging of devices that support Huawei SuperCharge Protocol. PE+ - quick charging of devices that support MediaTek Pump Express+ and Pump Express+ 2.0. PPS - charging using Programable Power Supply protocol (part USB PD 3.0 and QC4+) 3.3 - 11V / 3A. PD - quick charging of devices that support Power Delivery 2.0 and Power Delivery 3.0. PD - quick charging of Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max phone. PD - quick charging (up to 20W) of Apple iPhone 12 mobile and charging of Apple MacBook, MacBook Pro, iPad Pro, iPad Air. PD - quick charging (up to 65W) of Lenovo, HP, Dell, Apple MacBook, Acer, Asus etc notebooks. The charger supports WIV, AIC and CC functions: Wide Input Voltage - function of a wide range of input voltage; it protects the adapter against undervoltage and overvoltage at the input and allows the use of more national power standards. Automatic Intelligent Communication - function of automatic recognition of the connected device to select optimal charging parameters. Constant Output Current - the current hold function prevents the output power fluctuations; this function ensures steady course of charging. Complex output protection: OCP, OVP, OTP, OSP: Over Current Protection - protection of output against current overload. Over Voltage Protection - protection against overvoltage at the output. Over Temperature Protection - protection against overheating of the adapter. Output Short Circuit protection - short circuit protection at the output. Other features: dimensions of the charger body 103 x 36 x 32mm including a plug, weight: 118 g, material: non-flammable plastic. Package contains: wall charger, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.

The AXAGON ACU-DPQ65W GaN travel wall charger enables fast charging of up to three mobile devices at the same time. With 65W of total power, the charger charges notebooks, phones and other mobile devices at the highest possible speed. The adapter offers a standard USB-A connector, but also two double-sided USB-C connectors. Compact size and high performance is given by the new GaN technology used. The components used with Galium Nitride work with high efficiency, which allows you to achieve high performance with a small size. The charger is equipped with two Power Delivery 3.0 / Quick Charge 4+ USB Type-C outputs and one Quick Charge 3.0 USB Type-A output, enabling fast charging of not only smartphones and tablets, but also laptops. The Quick Charge 4+ technology allows up to 4 times faster charging of phones than a standard USB charger. Power Delivery 3.0 technology not only supports charging of modern phones, but also enables 65W PD charging of powerful laptops. The charger supports 20W PD charging for iPhone 12, 13, 14 and 15 and also offers 27W PD charging for iPhone 13 Pro, 14 Pro, 15 Pro and their Pro Max models. In addition, it supports 25W SFC charging for Samsung Galaxy S20 - S24, Note and Z Fold series and also offers 45W SFC 2.0 charging for Samsung Galaxy S20 - S24 Ultra, Tab S7+ - S9+, Tab S8 - S9 Ultra. The adapter is also compatible with other fast phone charging standards such as Apple iPhone, iPad, Samsung, Huawei, Honor, Xiaomi, as well as the Power Delivery 3.0 standard for charging Apple MacBook, Lenovo, Asus, HP, Dell and other laptops. The advanced protection system at the charging adapter output protects the device being charged from damage. The charger function also detects the device being charged and selects the optimal charging speed and progress. The body of the power adapter has a pleasant shape and size. Compared to classic charging adapters with the same parameters, the size of this charger is up to half the size. The combination of small dimensions, achieved with GaN technology and a wide range of input voltages, makes the charger an ideal travel helper. The operation of the charger is indicated by an elegant LED. Input: input voltage AC 100V-240V / 1.5A / 50-60 Hz (WIV function) supports multiple national power standards two-pin euro plug - integrated in the body of the charger Outputs: USB-A port QC (phones) max. 30W: 4.5V/5A, 5V/4.5A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A Charging technology: QC 3.0, QC 2.0, AFC, SCP, FCP, PE+, SMART, Apple 2.4A USB-C port PD2 (phones) max. 33W: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A, PPS: 3.3-11V/3A Charging technology: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, SFC, AFC, SCP, FCP, PE+, SMART, Apple PD USB-C port PD1 (laptops, phones) max. 65W:5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A, PPS: 3.3-11V/5A Charging technology: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, SFC 2.0, SFC, AFC, SCP, FCP, PE+, SMART, Apple PD Maximum performance using multiple ports: maximum power QC + PD2 24W, SMART mode charging is used (max. 5V/4.5A) QC + PD1 maximum power 63W PD1 + PD2 maximum power 63W QC + PD1 + PD2 maximum power 60W total maximum power 65W total maximum current 5A Supported charging technologies: Standard charging of all devices that support 5V and Apple iPhone 5, 6, SE, 7 charging. SMART - charging max. 5V/4.5A, Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A) and Apple 2.4A (iPad). PE+ - quick charging using MediaTek Pump Express+ and Pump Express+ 2.0 protocol FCP - quick charging using Huawei Fast Charge Protocol. SCP - quick charging (up to 20W) using Huawei SuperCharge Protocol. AFC - quick charging using Samsung Adaptive Fast Charging protocol. SFC - quick charging using Samsung Super Fast Charging and Super Fast Charging 2.0 protocol. QC - quick charging using Qualcomm Quick Charge 2.0, Quick Charge 3.0 and Quick Charge 4+ protocols. PPS - quick charging using Programmable Power Supply protocol (part of USB PD 3.0 and QC4+). PD - quick charging using USB Power Delivery 2.0 and Power Delivery 3.0 protocol. Examples of supported phones, tablets and laptops: SFC - quick charging (up to 25W) of Samsung Galaxy S20, S21, S22, S23, S24 series, Note 10, 20 series, Z Fold 2, 3, 4 series. SFC 2.0 - quick charging (up to 45W) of Samsung Galaxy S20, S21, S22, S23, S24 Ultra, Tab S7+, Tab S8+, Tab S9+, Tab S8 Ultra, Tab S9 Ultra. PD - quick charging of Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max phone. PD - quick charging (up to 20W) Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 14, 14 Plus, 15, 15 Plus phone. PD - quick charging (up to 27W) Apple iPhone 13 Pro, 13 Pro Max, 14 Pro, 14 Pro Max, 15 Pro, 15 Pro Max phone. PD - quick charging (up to 65W) of Lenovo, HP, Dell, Acer, Asus, Apple MacBook Air, MacBook Pro, iPad mini, iPad Air, iPad Pro and others notebooks. The charger supports WIV, AIC and CC functions: Wide Input Voltage - function of a wide range of input voltage; it protects the adapter against undervoltage and overvoltage at the input and allows the use of more national power standards. Automatic Intelligent Communication - function of automatic recognition of the connected device to select optimal charging parameters. Constant Output Current - the current hold function prevents the output power fluctuations; this function ensures steady course of charging. Complex output protection: OCP, OVP, OTP, OSP: Over Current Protection. Protection of output against current overload. Over Voltage Protection. Protection against overvoltage at the output. Over Temperature Protection. Protection against overheating of the adapter. Output Short Circuit protection. Short circuit protection at the output. Other features: dimensions of the charger body 103 x 36 x 32mm including a plug, weight: 118 g, material: non-flammable plastic. Package contains: white wall charger, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The compact USB wallcharger AXAGON ACU-PD30 Silfor fast charging of mobile devices. With s maximum power of 30W, the charger charges phones, tablets and other mobile devices at the highest possible speed. The adapter offers a reversible USB-C connector. Compact size and high performance is given by the new Sil technology used. Super silicon uses advanced silicon-based materials. The charger can thus achieve smaller dimensions and at the same time safe, stable and fast charging. The efficiency is thus identical to GaN technology while maintaining a favorable price. The charger is equipped with Power Delivery 3.0 / Quick Charge 4+ USB Type-C, enabling fast charging of smartphones and tablets with a power of up to 30W. The charger supports 20W PD charging for iPhone 12, 13, 14 and 15 and also offers 27W PD charging for iPhone 13 Pro, 14 Pro, 15 Pro and their Pro Max models. In addition, it supports 25W SFC charging for Samsung Galaxy S20 - S24, Note and Z Fold series and also offers 30W SFC charging for Samsung Galaxy S20 - S24 Ultra, Tab S7+ - S9+, Tab S8 - S9 Ultra. The adapter is also compatible with other fast phone charging standards such as Apple iPhone, iPad, Samsung, Huawei, Honor, Xiaomi. The advanced protection system at the charging adapter output protects the device being charged from damage. The charger function also detects the device being charged and selects the optimal charging speed and progress. The body of the power adapter has a pleasant shape and size. Compared to classic charging adapters with same parameters, the size of the charger is a third smaller. The combination of small dimensions, achieved with Sil technology and a wide range of input voltages, makes the charger an ideal travel helper. Input: input voltage AC 100V-240V / 1A / 50-60 Hz (WIV function) supports multiple national power standards two-pin euro plug - integrated in the body of the charger Output: USB-C port PD (tablets, phones) max. 30W: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A, PPS: 3-11V/3A, 3-16V/2A Charging technology: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, SFC, AFC, FCP, SMART, Apple PD, Apple 2.4A Maximum power: maximum power 30W maximum current 3A Supported charging technologies: Standard charging of all devices that support 5V and Apple iPhone 5, 6, SE, 7 charging. SMART - charging max. 5V/3A, Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A) a Apple 2.4A (iPad). FCP - quick charging using Huawei Fast Charge Protocol. AFC - quick charging using Samsung Adaptive Fast Charging protocol. SFC - quick charging using the Samsung Super Fast Charging protocol. QC - quick charging using Qualcomm Quick Charge 2.0, Quick Charge 3.0 and Quick Charge 4+ protocols. PPS - quick charging using the Programmable Power Supply protocol (part of USB PD 3.0 and QC4+). PD - quick charging using USB Power Delivery 2.0 and Power Delivery 3.0 protocol. Examples of supported phones, tablets and ultrabooks: SFC - quick charging (up to 25W) of Samsung Galaxy S20, S21, S22, S23, S24 series, Note 10, 20 series, Z Fold 2, 3, 4 series. SFC - quick charging (up to 30W) of Samsung Galaxy S20, S21, S22, S23, S24 Ultra, Tab S7+, Tab S8+, Tab S9+, Tab S8 Ultra, Tab S9 Ultra. PD - quick charging of Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max phone. PD - quick charging (up to 20W) Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 14, 14 Plus, 15, 15 Plus phone. PD - quick charging (up to 27W) Apple iPhone 13 Pro, 13 Pro Max, 14 Pro, 14 Pro Max, 15 Pro, 15 Pro Max phone. PD - quick charging (up to 30W) Apple iPad mini, iPad Air, iPad Pro, MacBook Air and other ultrabooks. The charger supports WIV, AIC and CC functions: Wide Input Voltage - function of a wide range of input voltage; it protects the adapter against undervoltage and overvoltage at the input and allows the use of more national power standards. Automatic Intelligent Communication - function of automatic recognition of the connected device to select optimal charging parameters. Constant Output Current - the current hold function prevents the output power fluctuations; this function ensures steady course of charging. Complex output protection: OCP, OVP, OTP, OSP: Over Current Protection. Protection of output against current overload. Over Voltage Protection. Protection against overvoltage at the output. Over Temperature Protection. Protection against overheating of the adapter. Output Short Circuit protection. Short circuit protection at the output. Other features: dimensions of the charger body 84 x 36 x 32 mm including a plug, weight: 56 g, material: non-flammable plastic. Package contains: black wall charger, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The compact USB wallcharger AXAGON ACU-PD30W Sil for fast charging of mobile devices. With s maximum power of 30W, the charger charges phones, tablets and other mobile devices at the highest possible speed. The adapter offers a reversible USB-C connector. Compact size and high performance is given by the new Sil technology used. Super silicon uses advanced silicon-based materials. The charger can thus achieve smaller dimensions and at the same time safe, stable and fast charging. The efficiency is thus identical to GaN technology while maintaining a favorable price. The charger is equipped with Power Delivery 3.0 / Quick Charge 4+ USB Type-C, enabling fast charging of smartphones and tablets with a power of up to 30W. The charger supports 20W PD charging for iPhone 12, 13, 14 and 15 and also offers 27W PD charging for iPhone 13 Pro, 14 Pro, 15 Pro and their Pro Max models. In addition, it supports 25W SFC charging for Samsung Galaxy S20 - S24, Note and Z Fold series and also offers 30W SFC charging for Samsung Galaxy S20 - S24 Ultra, Tab S7+ - S9+, Tab S8 - S9 Ultra. The adapter is also compatible with other fast phone charging standards such as Apple iPhone, iPad, Samsung, Huawei, Honor, Xiaomi. The advanced protection system at the charging adapter output protects the device being charged from damage. The charger function also detects the device being charged and selects the optimal charging speed and progress. The body of the power adapter has a pleasant shape and size. Compared to classic charging adapters with same parameters, the size of the charger is a third smaller. The combination of small dimensions, achieved with Sil technology and a wide range of input voltages, makes the charger an ideal travel helper. Input: input voltage AC 100V-240V / 1A / 50-60 Hz (WIV function) supports multiple national power standards two-pin euro plug - integrated in the body of the charger Output: USB-C port PD (tablets, phones) max. 30W: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A, PPS: 3-11V/3A, 3-16V/2A Charging technology: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, SFC, AFC, FCP, SMART, Apple PD, Apple 2.4A Maximum power: maximum power 30W maximum current 3A Supported charging technologies: Standard charging of all devices that support 5V and Apple iPhone 5, 6, SE, 7 charging. SMART - charging max. 5V/3A, Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A) a Apple 2.4A (iPad). FCP - quick charging using Huawei Fast Charge Protocol. AFC - quick charging using Samsung Adaptive Fast Charging protocol. SFC - quick charging using the Samsung Super Fast Charging protocol. QC - quick charging using Qualcomm Quick Charge 2.0, Quick Charge 3.0 and Quick Charge 4+ protocols. PPS - quick charging using the Programmable Power Supply protocol (part of USB PD 3.0 and QC4+). PD - quick charging using USB Power Delivery 2.0 and Power Delivery 3.0 protocol. Examples of supported phones, tablets and ultrabooks: SFC - quick charging (up to 25W) of Samsung Galaxy S20, S21, S22, S23, S24 series, Note 10, 20 series, Z Fold 2, 3, 4 series. SFC - quick charging (up to 30W) of Samsung Galaxy S20, S21, S22, S23, S24 Ultra, Tab S7+, Tab S8+, Tab S9+, Tab S8 Ultra, Tab S9 Ultra. PD - quick charging of Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max phone. PD - quick charging (up to 20W) Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 14, 14 Plus, 15, 15 Plus phone. PD - quick charging (up to 27W) Apple iPhone 13 Pro, 13 Pro Max, 14 Pro, 14 Pro Max, 15 Pro, 15 Pro Max phone. PD - quick charging (up to 30W) Apple iPad mini, iPad Air, iPad Pro, MacBook Air and other ultrabooks. The charger supports WIV, AIC and CC functions: Wide Input Voltage - function of a wide range of input voltage; it protects the adapter against undervoltage and overvoltage at the input and allows the use of more national power standards. Automatic Intelligent Communication - function of automatic recognition of the connected device to select optimal charging parameters. Constant Output Current - the current hold function prevents the output power fluctuations; this function ensures steady course of charging. Complex output protection: OCP, OVP, OTP, OSP: Over Current Protection. Protection of output against current overload. Over Voltage Protection. Protection against overvoltage at the output. Over Temperature Protection. Protection against overheating of the adapter. Output Short Circuit protection. Short circuit protection at the output. Other features: dimensions of the charger body 84 x 36 x 32 mm including a plug, weight: 56 g, material: non-flammable plastic. Package contains: white wall charger, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The AXAGON ACU-PQ67 GaN travel wall charger enables fast charging of up to two mobile devices at the same time. With a total output power of 67W, the charger can recharge laptops, tablets, phones, and other mobile devices at their maximum possible speed. The adapter is equipped with both a standard USB-A connector and a reversible USB-C connector.Its compact size and high performance are possible thanks to advanced GaN technology. Gallium Nitride components operate with high efficiency, allowing for high power output in a small size. The charger features a Power Delivery 3.0 / Quick Charge 4+ USB Type-C output and a Quick Charge 3.0 USB Type-A output, making it suitable for fast charging not just smartphones and tablets, but also laptops.Quick Charge 4+ technology enables up to 4x faster charging for phones compared to a standard USB charger. Power Delivery 3.0 technology supports fast charging for modern phones and enables up to 67W charging for recent laptops.Apple devices are supported for fast charging, with maximum power depending on the model: iPhone 12-15 support up to 20W, iPhone 16 and 16 Pro up to 24W, iPhone 13 Pro to 15 Pro and iPhone 17 up to 27W. Higher power is available for the iPhone 16 Pro Max up to 30W and iPhone 17 Pro and Pro Max up to 40W. The charger is also compatible with iPads and Apple MacBook Air and Pro laptops.Samsung Galaxy phones support Super Fast Charging up to 25W SFC for the Galaxy S20-S25 series and Z Fold and Z Flip foldable models. Selected Galaxy Ultra models and Galaxy Tab tablets support even faster charging, up to 45W SFC 2.0.The charger is also compatible with other brands such as Motorola, Google Pixel, Xiaomi, Honor, Oppo, OnePlus, Realme, and other popular phones and tablets. It is suitable for charging laptops with PD 3.0 technology up to 67W from brands like Lenovo, HP, Dell, Acer, Asus, and others.An advanced output protection system safeguards connected devices from damage. The charger's functions also automatically detect the connected device and select the optimal charging speed and process.The power adapter has a pleasant shape and compact size. Compared to standard charging adapters with the same specifications, this charger is up to half the size. The combination of compact dimensions made possible by GaN technology and a wide input voltage range makes this charger ideal for travel.Input: Input voltage AC 100V-240V / 1.8A / 50-60Hz (WIV function), supports multiple national power standards Two-pin Euro plug - integrated into the adapter bodyOutputs: USB-A port QC (phones) max. 30W: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A Charging technologies: QC 3.0, QC 2.0, AFC, SCP, FCP, SMART, Apple 2.4A USB-C port PD (laptops, phones) max. 67W: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.35A, PPS: 3.3-11V/5A Charging technologies: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, SFC 2.0, SFC, AFC, SCP, FCP, SMART, Apple PDMaximum charger output when using multiple ports:2 devices connected simultaneously USB-C port PD = 45W MAX USB-A port QC = 12W MAXNote: When charging multiple devices simultaneously, the required power is shared dynamically between them. The allocated power may change during charging.Supported charging technologies: Standard charging for all devices supporting 5V and charging for Apple iPhone 5, 6, SE, 7. SMART - charging up to 5V/4.5A, Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A), and Apple 2.4A (iPad). FCP - fast charging via Huawei Fast Charge Protocol. SCP - fast charging (up to 25W) via Huawei SuperCharge Protocol. AFC - fast charging using Samsung Adaptive Fast Charging protocol. SFC - fast charging via Samsung Super Fast Charging and Super Fast Charging 2.0 protocols. QC - fast charging via Qualcomm Quick Charge 2.0, 3.0, and 4+ protocols. PPS - fast charging via Programmable Power Supply protocol (part of USB PD 3.0 and QC4+). PD - fast charging using USB Power Delivery 2.0 and Power Delivery 3.0 protocols.Examples of supported phones, tablets, and laptops: SFC - fast charging (up to 25W) for Samsung Galaxy S20, S21, S22, S23, S24, S25 series, Note 10, 20 series, Z Fold 2, 3, 4, 5, 6, 7 series, Z Flip 3, 4, 5, 6, 7. SFC 2.0 - fast charging (up to 45W) for Samsung Galaxy S20, S21, S22, S23, S24, S25 Ultra, Tab S7+, Tab S8+, Tab S9+, Tab S10+, Tab S8 Ultra, Tab S9 Ultra, Tab S10 Ultra PD - fast charging for Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max. PD - fast charging (up to 20W) for Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 14, 14 Plus, 15, 15 Plus, 16 Plus PD - fast charging (up to 24W) for iPhone 16e, iPhone 16, iPhone 16 Pro PD - fast charging (up to 27W) for Apple iPhone 13 Pro, 13 Pro Max, 14 Pro, 14 Pro Max, 15 Pro, 15 Pro Max, iPhone 17 PD - fast charging (up to 30W) for iPhone 16 Pro Max PD - fast charging (up to 40W) for iPhone 17 Pro, 17 Pro Max PD - fast charging (up to 67W) for laptops from Lenovo, HP, Dell, Acer, Asus, Apple MacBook Air, MacBook Pro, iPad mini, iPad Air, iPad Pro, and others.The charger supports WIV, AIC, and CC functions: Wide Input Voltage - supports a broad input voltage range, protecting the adapter from undervoltage and overvoltage and allowing use with different national power standards. Automatic Intelligent Communication - automatically detects the connected device to select optimal charging parameters. Constant Output Current - maintains stable current to prevent output power fluctuations and ensure safe charging.Comprehensive output protection: OCP, OVP, OTP, OSP: Over Current Protection — safeguards against current overload. Over Voltage Protection — protects against output overvoltage. Over Temperature Protection — prevents adapter overheating. Output Short Circuit Protection — protects against short circuit at the output.Other features: Charger adapter dimensions: 90 x 46 x 32 mm including plug, Weight: 105 g, Material: flame-retardant plastic.Package includes: Gray wall charger, Multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, Packed in a cardboard box with a hanging hole.

The AXAGON ACU-PQ67D GaN travel wall charger enables fast charging of up to two mobile devices at the same time. With a total output power of 67W, this charger can recharge laptops, tablets, phones, and other mobile devices at the highest possible speed. It features both a standard USB-A connector and a reversible USB-C connector. The clear LCD display shows the current charging power.Its compact size and high performance are made possible by new GaN technology. Components made from Gallium Nitride operate with high efficiency, providing high power output in a small form factor. The charger is equipped with a Power Delivery 3.0 / Quick Charge 4+ USB Type-C output and a Quick Charge 3.0 USB Type-A output, supporting fast charging not only for smartphones and tablets, but also for laptops.Quick Charge 4+ technology enables up to 4x faster phone charging compared to a standard USB charger. Power Delivery 3.0 supports fast charging for modern phones and also allows for 67W laptop charging.Apple devices are supported for fast charging, with the maximum power depending on the model: iPhone 12-15 support charging up to 20W, iPhone 16 and 16 Pro up to 24W, iPhone 13 Pro to 15 Pro models and iPhone 17 up to 27W, iPhone 16 Pro Max up to 30W, and iPhone 17 Pro and Pro Max up to 40W. The charger is also compatible with iPads and Apple MacBook Air and Pro laptops.Samsung Galaxy phones support Super Fast Charging up to 25W (SFC) for Galaxy S20-S25 series and foldable Z Fold and Z Flip models. Selected Galaxy Ultra models and Galaxy Tab tablets support even faster charging up to 45W (SFC 2.0).Support also extends to other brands such as Motorola, Google Pixel, Xiaomi, Honor, Oppo, OnePlus, Realme, and other common phones and tablets. The charger is also suitable for charging laptops with PD 3.0 technology up to 67W, including brands like Lenovo, HP, Dell, Acer, Asus, and more.An advanced output protection system keeps connected devices safe from damage. The charger's functions also ensure detection of the connected device and automatic selection of the optimal charging speed and process.The charger's body has an ergonomic shape and compact size. Compared to conventional charging adapters with similar parameters, this charger is up to half the size. The combination of small dimensions from GaN technology and a wide input voltage range makes it an ideal travel companion. The integrated LCD display clearly shows the current charging power in watts in real time, so you can easily confirm that your connected device is drawing fast charging power.Input: Input voltage AC 100V-240V / 1.8A / 50-60Hz (WIV function), supports multiple national power standards Two-pin Euro plug—integrated into the adapter bodyOutputs: USB-A port QC (phones) max. 30W: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A Charging technologies: QC 3.0, QC 2.0, AFC, SCP, FCP, SMART, Apple 2.4A USB-C port PD (laptops, phones) max. 67W: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.35A, PPS: 3.3-11V/5A Charging technologies: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, SFC 2.0, SFC, AFC, SCP, FCP, SMART, Apple PDMaximum charger output when using multiple ports:2 devices connected simultaneously USB-C port PD = 45W MAX USB-A port QC = 12W MAXNote: When charging multiple devices, the devices share the available power. The allocated power may change during charging.Supported charging technologies: Standard charging for all devices supporting 5V and charging for Apple iPhone 5, 6, SE, 7. SMART – charging up to 5V/4.5A, Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A), and Apple 2.4A (iPad). FCP – fast charging with Huawei Fast Charge Protocol. SCP – fast charging up to 25W with Huawei SuperCharge Protocol. AFC – fast charging with Samsung Adaptive Fast Charging protocol. SFC – fast charging with Samsung Super Fast Charging and Super Fast Charging 2.0. QC – fast charging with Qualcomm Quick Charge 2.0, 3.0, and 4+. PPS – fast charging with the Programmable Power Supply protocol (part of USB PD 3.0 and QC4+). PD – fast charging with USB Power Delivery 2.0 and 3.0.Examples of supported phones, tablets, and laptops: SFC—fast charging (up to 25W) for Samsung Galaxy S20, S21, S22, S23, S24, S25 series, Note 10, 20 series, Z Fold 2-7 series, Z Flip 3-7 series. SFC 2.0—fast charging (up to 45W) for Samsung Galaxy S20-S25 Ultra, Tab S7+, Tab S8+, Tab S9+, Tab S10+, Tab S8 Ultra, Tab S9 Ultra, Tab S10 Ultra PD—fast charging for Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max. PD—fast charging (up to 20W) for Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 14, 14 Plus, 15, 15 Plus, 16 Plus PD—fast charging (up to 24W) for iPhone 16e, iPhone 16, iPhone 16 Pro PD—fast charging (up to 27W) for Apple iPhone 13 Pro, 13 Pro Max, 14 Pro, 14 Pro Max, 15 Pro, 15 Pro Max, iPhone 17 PD—fast charging (up to 30W) for iPhone 16 Pro Max PD—fast charging (up to 40W) for iPhone 17 Pro, 17 Pro Max PD—fast charging (up to 67W) for laptops from Lenovo, HP, Dell, Acer, Asus, Apple MacBook Air, MacBook Pro, iPad mini, iPad Air, iPad Pro, and more.The charger supports WIV, AIC, and CC functions: Wide Input Voltage—wide input range function protects the adapter from under- and over-voltage at the input and allows usage with different national standards. Automatic Intelligent Communication—automatic detection of the connected device to select optimal charging parameters. Constant Output Current—constant current function prevents output power fluctuations and ensures stable charging.Comprehensive output protection: OCP, OVP, OTP, OSP: Over Current Protection—output protection against current overload. Over Voltage Protection—output overvoltage protection. Over Temperature Protection—protection against adapter overheating. Output Short Circuit protection—protection against output short circuit.The LCD display shows: Current charging power in watts (W).Other features: Charger adapter dimensions: 90 x 46 x 32 mm including plug Weight: 105 g Material: flame-retardant plasticPackage contains: Gray wall charger Multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA Packed in a cardboard box with a hanging hole.

The AXAGON ADE-25R external network card easily converts a USB-A 3.2 Gen 1 (USB 3.0) port into a 2.5 Gigabit Ethernet port. It is compatible with 10/100/1000/2500 Mbit/s transfer speeds. The 2.5 Gb/s network adapter expands your computer with an ultra-fast and stable network connection, adds a missing RJ-45 network connector, provides an additional network card, or replaces a non-functional original network connection. Besides 2.5 gigabit throughput, the LAN adapter offers a wide range of features, such as IPv4/IPv6 checksum offloading to reduce CPU load, crossover detection and auto-correction, TCP large send offload, support for various Wake-on-LAN modes, operation with virtual LAN (VLAN), and advanced Power Management features. Thanks to the IEEE 802.3bz standard, standard Cat 5e and Cat 6 Ethernet cables up to 100 m can be used for 2.5 Gb/s speeds. The metal adapter casing is made of aluminum, ensuring excellent mechanical protection and superior heat dissipation. Its compact size and minimal weight make it an ideal accessory for laptops. With support for current versions of Windows, macOS, and Linux, it can be used with any desktop, laptop, or ultrabook. With modern operating systems from Windows 8.1 and newer, the adapter supports easy automatic installation without requiring an internet connection. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Supports transmission rates of 5,000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). Features a USB type A male connector on a 15 cm permanently attached cable. Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable. Supported Ethernet interface transmission rates: 10/100/1000/2500 Mb/s. Supports IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, and IEEE 802.3bz 2.5GBase-T specifications. 10/100/1000/2500 Mb/s auto-detection. NBASE-T specification support—allows up to 2.5 Gbps over standard UTP Cat5e cables. Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/IGMP & IPv6 TCP/UDP/ICMPv6 checksum verification and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) to reduce power consumption during idle. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex with back-pressure flow control. Supports Auto MDI/MDIX—crossover detection and auto-correction eliminates need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) for transmission error detection. Supports Pair Swap/Polarity/Skew Correction. Other features: Full Plug and Play and Hot Plug support. Supports CDC-ECM for automatic driver installation on various operating systems. Adapter powered via USB (bus power)—no external power needed. Two LEDs indicate network activity and adapter connection. Dimensions: 64 x 24 x 14 mm. Weight: 26 g (including cable). USB cable length: 15 cm. Features Realtek RTL8156B chipset. Wake-on-LAN feature support in different modes: Supports sleep mode and remote wake-up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, and Link Change Wake-up. Supports ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. RealWoW! technology support enables remote wake-up over the Internet. Advanced Power Management features: The adapter supports advanced power management to reduce loss during standby or under light network traffic, as well as advanced power saving when the Ethernet cable is disconnected. Supports Advanced Configuration Power Management Interface (ACPI). Supports Power Management offload (ARP & NS). Supports Microsoft Always On Always Connected (AOAC). Supports Intel Converged Platform Power Management (CPPM). Supports Link Power Management (LPM). Supports Operating System-directed Power Management (OSPM). Supports IEEE 802.3az EEE (Energy Efficient Ethernet). Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32 and 64-bit versions supported), MacOS X 10.6 and later, Linux with kernel 2.6.14 and later. Package includes: 2.5 Gigabit Ethernet adapter with fixed 15 cm USB-A cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with hanging hole.

Active extension AXAGON ADR-310 USB 3.2 Gen 1 cable, 10 m in length. Ideal for connecting your computer to USB devices such as a mouse, keyboard, webcam, printer, scanner, plotter, and more. The active USB repeater cable amplifies the signal, allowing connection to USB devices at much greater distances than passive cables. The range can be further extended by connecting several cables in series. With the USB 3.2 Gen 1 interface (formerly USB 3.0), you can enjoy data transfer speeds of up to 5 Gbps. This makes the cable suitable for devices requiring high speeds, such as backup systems, NAS data storage, and others. The ADR-310 cable stands out with its integrated auxiliary power supply connector. While USB bus power is sufficient in most situations, auxiliary power from the mains can be used for devices with higher power demands, solving potential power insufficiencies. The repeater's compact design allows easy use in electrical installation strips or cable management systems. High-quality shielded cabling ensures fast data communication and minimal interference. Input: USB 3.2 Gen 1 for connection to a computer USB Type A (M) male connector Output: USB 3.2 Gen 1 for connecting a remote USB device USB Type A (F) female connector Data transfer rates: 5000 / 480 / 12 / 1.5 Mbit/s (high / full / low speed) Power supply: Power to the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, USB bus power is sufficient and no auxiliary power is needed. The active part of the cable features a Micro USB connector for additional external power supply of 5V/1-2A. Includes a USB A-M / Micro USB power cable, 1.2 m in length. This cable allows powering from a standard mobile phone charger with a USB-A output of 5V / min. 1A, e.g., AXAGON ACU-DS16. When the repeater cable is powered by a power adapter, you can connect an external 2.5" drive without needing a separate power supply for the drive. For longer USB routes using multiple repeater cables in series, USB bus power may be insufficient even for devices with lower power consumption than an external 2.5" drive. In such cases, supplementing the power supply with a power adapter can help. Other features: Fully compatible with USB 3.2 Gen 1 (USB 3.0), and backwards compatible with USB 2.0 and USB 1.1. Supports Plug and Play and Hot Plug. Two LEDs indicate power and USB connection status. You can also connect a standard passive USB cable after the active USB cable. Dimensions of active part: 75 x 24 x 13 mm; cable length: 10 m. Weight: 408 g. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher, Linux with 2.6.x kernel and higher. Note: Drivers are included in supported operating systems and will install automatically. No additional drivers are required or available. Package contains: USB 3.2 Gen 1 A-M > A-F active repeater, 10 m long, USB-A / Micro USB power cable, multilingual manual (CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA), packed in a cardboard box.

The AXAGON ADSA-CC CLONE MASTER 2 universal USB-C 10Gbps adapter connects up to two drives to your computer quickly and easily at the same time. Easily connect any 2.5" or 3.5" drive directly to the adapter's external SATA connector. Simply insert the NVMe M.2 drive into the adapter body without the use of a screwdriver or other tools. You can also connect a SATA M.2 drive to the adapter using an external adapter such as the AXAGON RSS-M2SD. In the package you will find a USB-C USB-C cable with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Thanks to the cloning function without the need to connect to a PC, the adapter can be used as a stand-alone device for convenient duplication and disk imaging. The cloning direction is adjustable via a switch, so you can easily choose whether to clone the contents of an NVMe M.2 drive to a SATA drive or vice versa. After all the data is copied, the target disk is an exact copy of the original disk. This is the easiest way to transfer the contents of one drive to another, including a working operating system (Windows, macOS, Linux ...). In addition to the fast USB 10Gbps interface, the adapter also supports all important functions for working seamlessly with different types of drives, such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected M.2 and 2.5" drives only from the USB port. In case of connecting a 3.5" drive, the included power adapter is of course already required. These features make the CLONE MASTER 2 adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal helper for backup, migration, data transfer and storage, testing and cloning discs, etc. Input: USB 10Gbps (USB 3.2 Gen 2). Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. M.2 slot device support: NVMe (PCI-Express) M.2 SSD one-sided and double-sided drives. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Supports M-KEY & B+M-KEY NVMe M.2 SSD disks. No capacity limitation. Support for devices connected to the SATA port: SATA 2.5"/3.5" SSD/HDD. SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD. No capacity limitation. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning direction switch - from NVMe M.2 drive to SATA drive or from SATA drive to NVME M.2 drive. SSD cloning speed up to 500 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0) and USB 480Mbps (USB 2.0). Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. The total adapter bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8.1 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Support for booting from disks connected to the adapter. HDD Auto Spindown - automatic spinning down when they idle for 10 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Full Plug and Play support. Connection via USB-C female connector. Cable USB-C male USB-C male 30 cm length + USB-C -> USB-A reducer included. Adapter dimensions 102 x 68 x 15 mm. Adapter weight 73 g (without accessories). Power: USB Bus Power - for M.2 and 2.5" drives, power via the USB bus is sufficient. Self Power - for 3.5" drives, power is required using the included external AC/DC adapter 12V - 2A with a 150 cm cable. Power switch. LED indication: the green LED indicates that the adapter is powered on (permanent light). 2x orange LED indicates connection for each of the disks (permanent light) and data transmission (blinking). 4x blue LED indicates cloning process 25% -50% -75% -100% (blinking), resp. cloning completion (permanent light). Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: M.2 + 2.5"/3.5" SSD/HDD adapter, power adapter 100-240V / 12V-2A, 4 thermal conductive pads, USB-C USB-C cable 30 cm long + USB-C -> USB-A reduction, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

SuperSpeed USB-C 5Gbps docking / cloning station AXAGON ADSA-DC DUAL CLONE easily and quickly connects up to two 2.5" or 3.5" drives to the computer at the same time. The connection to the computer is enabled by the modern double-sided USB-C connector on the dock together with the supplied USB-C USB-A cable with a length of 80 cm. This handy helper will allow you easiest connection of any 2.5/3.5" SATA drive to computer or notebook. Just insert one or even two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux...). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5Gbit/s. Connection via USB-C female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, Supports 2.5" HDD/ SSD Supports 3.5" HDD. Max. disk capacity all without limitation. Max. 2.5" disk height - all without limitation. Features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2) and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transmission in Windows 8 and later. TRIM support to reduce the gradual degradation of SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. HDD/SSD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spin down - shutdown of disks when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB-C female connector. USB-C USB-A cable 80 cm long is included. LED indicating HDD/SSD dock power and disk activity in both shafts. Station dimensions 73 x 130 x 97 mm. Weight 307 g. Power: Power supply using the included external AC/DC adapter 12V - 3A with 150 cm long cable. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDDs and SSDs can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported OS: Windows, macOS, Linux, Chrome OS. Package contains: HDD/SSD dock, USB-C USB-A cable 80 cm long, power adapter 100-240V / 12V-2.5A, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Compact AXAGON ADSA-FP2A SLIM adapter with USB-A 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-A cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-A 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type A male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 20 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-A - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Compact AXAGON ADSA-FP2C SLIM adapter with USB-C 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-C cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type C male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 18 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-C - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

SuperSpeed USB AXAGON ADSA-SN COMPACT HDD/SSD DOCK docking station easily and quickly connects any SATA disk to your computer. A handy helper for the easiest and fastest way of connecting SATA disks to your computer - just plug the disk into the base. Automatic installation can be done even by the layman. SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports sleeping of both the connected disks and station. Low laid centre of gravity of the docking station for good stability. Rubber feet to reduce vibrations. Modern minimalist design of housing with aluminium casing. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB rate of up to 5 Gbit/s. Connection via micro USB type B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" HDD/SSD, supports 3.5" HDD, max. disk capacity all without limitation, max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0, backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport). SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down after period of inactivity lasting 15 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. cable micro USB-B / USB-A 80 cm long is included. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Power switch. Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. Station dimensions 130 x 65 x 59 mm. Weight 190 g. Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 HDD dock, micro USB-B - USB-A cable 80 cm long, power adapter 100-240V / 12V-2A, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with clearly indicated parameters.

The external network card AXAGON ADE-25RC easily converts USB-C 3.2 Gen 1 (USB 3.0) port to 2.5 Gigabit Ethernet port. It is compatible with 10/100/1000/2500 Mbit/s transfer speeds. The network adapter with 2.5 Gb/s speed expands the computer with a very fast and stable network connection, adds the missing RJ-45 network connector, adds another network card, or replaces the original non-functional network connection. In addition to 2.5 gigabit throughput, the LAN adapter offers a wide range of features, such as IPv4/IPv6 checksum to reduce CPU load by checksums, the crossover detection and auto-correction, TCP large send offload, support for various modes of the Wake-on-LAN feature, the work with virtual LAN (VLAN) and advanced Power Management features. The advantage of the IEEE 802.3bz standard is that standard Cat 5e and Cat 6 Ethernet cables up to 100 m long can be used for 2.5 Gb/s speed. The metal adapter cover is made of aluminum and provides perfect mechanical protection and excellent heat dissipation. Thanks to its compact dimensions and minimal weight, it is an ideal accessory for laptops. The support for current versions of Windows, macOS, and Linux operating systems allows it to be used for any desktop, laptop or ultrabook equipped with a modern double-sided USB Type C connector. In modern operating systems from Windows 8.1 above, the adapter allows easy automatic installation without the need for an Internet connection. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Compatible with Thunderbolt 3 and 4. Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). Connecting USB type C male connector on a 15 cm long permanently attached cable. Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000/2500 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3bz 2.5GBase-T specifications. 10/100/1000/2500 Mb/s auto-detection. NBASE-T specification support - allows speeds up to 2.5 Gbps via standard UTP Cat5e cables. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Other features: Full Plug and Play and Hot Plug support. Supports CDC-ECM for automatic installation of drivers across different OSs. Adapter power supply via USB (bus power) - no auxiliary power supply required. Two LEDs indicate the network activity and connection of the adapter to the network. Dimensions 64 x 24 x 14 mm. Weight 26 g (incl. cable). USB cable length 15 cm. The Realtek RTL8156B chipset is used. Wake-on-LAN feature support in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection and Link Change Wake-up. Supports ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. RealWoW! technology support allows remote wake up over the Internet. Advanced Power Management features:The adapter supports advanced power management to reduce losses during standby or light traffic on the network. It further supports advanced power saving when the Ethernet cable has been disconnected. Supports Advanced Configuration Power Management Interface (ACPI). Supports Power Management offload (ARP & NS). Supports Microsoft Always On Always Connected (AOAC). Supports Intel Converged Platform Power Management (CPPM). Supports Link Power Management (LPM). Supports Operating System-directed Power Management (OSPM). Supports IEEE 802.3az EEE (Energy Efficient Ethernet). Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.6 and later, Linux with kernel 2.6.14 and later. Package contains: 2.5 Gigabit Ethernet adapter with fixed 15 cm long USB-C cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard.

A compact AXAGON ADSA-1S6 SLIMport6 high-speed adapter with USB 3.0 and SATA 6G interface intended for easy connection of SSD or 2.5" SATA disk. A handy tool to quickly connect a SSD or laptop disk, including boot support. The UASP support significantly increases transmission rates especially when working with small files in the queue. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports spinning down of connected disks as well as an adapter. The installation can be handled even by a layman - the disk connects to the adapter and the adapter to the computer's USB port; the rest is done automatically. Minimum dimensions and weight, along with an enclosed disc case, make the product ideally suited even for mobile use. Features: Compatible with USB 3.0 and backward compatible with USB 2.0. Supports transmission rates 12 / 480 / 5000 Mb/s (low / full / high speed). Supports 2.5" SATA III / II / I disks of all capacities. Compliant with Serial ATA 3.1 specification (SATA/600), transmission rates of up to 6 Gb/s. Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB 3.0 interface used (theor. 5 Gbit/s). Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport). Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 22 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB 3.0 micro B female connector. USB 3.0 cable USB 3.0 Type A male / USB 3.0 Type B male 10 cm long is included. Supplying the power via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Compact adapter dimensions 70 x 21 x 10 mm. Adapter weight only 11 g, weight of USB cable 18 g. Simple plastic case holds 2.5" disk max. 9.5 mm high with USB adapter connected (USB cable is led out through hole in the case). For thin 7mm SSDs/HDDs foam pads are included for better fit in the case. The case can also serve to transport or store the adapter itself without the disk, with the USB cable inside the case. Case dimensions 122 x 78 x 19 mm. Case weight 40 g. Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains:USB 3.0 - SATA 6G adapter,USB 3.0 cable 10 cm,plastic case for 2.5" disk and USB adapter,foam pads for 7 mm HDDs and SSDs,printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,Packed in a cardboard box.

SuperSpeed USB 5 Gbps docking / cloning station AXAGON ADSA-D25 CLONE MINI quickly and easily connects up to two 2.5" disks to your computer at the same time. The USB Micro-B connector on the dock and included USB Micro-B USB-A cable enables a connection to computer. This compact helper will allow you easiest connection of any 2.5" SATA drive to computer or notebook. Just insert one or two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB 5 Gbps. Speed up to 5 Gbit/s. Connection via USB Micro-B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface. Supports 2.5" SSD/HDD. Max. disk capacity all without limitation. Max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB Micro-B female connector. USB Micro-B USB-A cable 60 cm long is included. LED indicating SSD/HDD dock power and disk activity in both shafts. Station dimensions 89 x 58 x 59 mm. Weight 137 g. Power: Power cable USB-A 3.5/1.3 mm DC 5V length 1 m is included in the package. The cable allows powering the station from the computer USB-A port or a standard mobile phone charger with a USB-A output of 5V / min. 1A, e.g. AXAGON ACU-DS16. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDD and SSD can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported operating systems: MS Windows 7 / 8 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SSD/HDD dock, USB Micro-B USB-A cable 60 cm long, power cable 100 cm, printed installation manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Multiport USB-C 3.2 Gen 1 hub AXAGON HMC-HCR3A expands your laptop, computer or phone with four ports and SD / microSD card reader. Through the double-sided USB-C connector, you can easily and quickly connect three USB devices, memory cards and an HDMI display to the computer at the same time. The USB-C hub will provide you with a simple and compact 5in1 docking station for notebook. The USB hub offers three USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. Popular gaming resolution WQHD 2560 x 1440px at 60Hz or FullHD 1920 x 1080px at 60, 100 and 120Hz max. are also supported. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Card reader supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. High data transfer speed ensured by USB 3.2 Gen 1 interface. The card reader enables simultaneous handling of cards in both slots and direct copying between them. Elegant aluminum body ensures mechanical resistance and quality cooling. The finely structured surface with no fingerprint remains will also please you. Port replicator is an ideal accessory for laptops without USB-A connectors, card reader and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. You can connect a flash drive, keyboard, mouse, monitor, TV or projector to your phone. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Compatible with Thunderbolt 3. Connecting USB type C male connector on a fixed 20 cm long cable. USB outputs: 3x SuperSpeed USB port, USB-A female connector. Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit/s). USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A in each of the hub's USB ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port). HDMI output: HDMI. HDMI A (F) female connector. Maximum supported resolution 4K / 4096 x 2160 at 30 Hz. WQHD resolution 2560 x 1440 at 60 Hz max. FullHD resolution 1920 x 1080 at 60, 100, 120 Hz max. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Correct OS is also necessary. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Support up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio formats. Support sampling rate up to 192kHz and up to 24-bit audio depends on source and end device, i.e. laptop/phone and TV/monitor/ AV receiver. The card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash, SD slot: Digital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB), MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus (USB bus power). Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings. White LED indicates the connection to the computer's USB port. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions 110 x 35 x 12.5 mm. Weight 58 g (incl. cable). USB cable length 20 cm. Supported operating systems: Microsoft Windows 10, 11, Mac OS, Linux, Android and Chrome OS. Compatibility depends on used OS and support from device manufacturer. Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed. Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Package contains: USB-C hub with fixed 20 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.

AXAGON PCEU-43RS PCI-Express card adds four external USB 3.2 Gen 1 ports to your desktop computer. The card is designed for fast data transfers at speeds up to 5 Gb/s. All four SuperSpeed USB ports are taken out to the bracket. The dual power supply of the controller enables standard power supply of the controller and connected USB peripherals via the PCI-Express bus as well as optional power supply from the PC power supply via the SATA power connector. The USB controller is equipped with a renowned Renesas company chipset with proven seamless compatibility, high performance and UASP support. Low profile bracket is included in the package for mounting the adapter into low profile cases. Input: PCI-Express 2.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.1 / 3.0. Number of lines: 1-Lane (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. A bandwidth of 1-Lane PCI-Express 2.0 bus is 5 Gb/s. Output: 4x external USB 3.2 Gen 1 port with USB type A-F connectors. SuperSpeed USB - USB 3.2 Gen 1 interface (before USB 3.1 Gen 1 / USB 3.0). Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 a USB 1.1. Supports transmission rates 5000 / 480 / 12 / 1.5 Mb/s (super / high / full / low speed). When connected to a PCI-Express bus version 1.0, theor. transmission rate max. 2500 Mb/s. Other features: Full Plug and Play support. Supports concurrent activity of SuperSpeed USB, USB 2.0 and USB 1.1 devices. Compliant with the final official xHCI specification revision 1.0 by USB-IF. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Fully supports Hot Plug connecting and disconnecting of USB devices while running. Standard power supply for the controller and connected USB peripherals via the PCI-Express bus. In this power supply mode, the PCIe controller can handle up to three magnetic 2.5" external disks simultaneously. Optional power supply from PC source via SATA power connector. Renesas PD720201 chipset is used. Supported operating systems: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.31 and above. Note: Drivers are only installed for Windows XP / Vista / 7. For Linux, Windows 8 / 8.1 / 10 / 11, Server 2012 / 2016 / 2019 / 2022 and later versions, no external drivers are required, they are already part of the operating system. Package contains: PCI-Express controller with a standard bracket, low-profile bracket multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

• 5 Gbit/s • Materjal: Alumiinium • Varunduse meedia tüüp: HDD, SSD • Ketta liides: Jada ATA, Jada ATA II, Jada ATA III • Toetatud ketaste suurused: 2.5,3.5" • Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-A • DC-pistik Isehäälestuv • Hall Axagon AXG ADSA-DC - Docking- und Kopierstation 2x 2.5"/3.5" SATA USB 3.0 - Digital/Daten, HDD, SSD, Jada ATA, Jada ATA II, Jada ATA III, 2.5,3.5", USB 3.2 Gen 1 (3.1 Gen 1) Type-A, Hall, Alumiinium

Premium connection USB-C USB-C Data and Charging AXAGON BUCM2-CM25AB CHARGE cable with USB-C male connectors at both ends. The cable is designed especially for charging and powering computers, monitors, laptops, phones, tablets and other devices. It also supports data transfer speeds of up to 480 Mb/s. The cable has implemented the latest specification of Power Delivery 3.1 charging technology. This technology delivers, among other things, a power output of 240W which is more than double that of Power delivery 3.0, which delivers 100W. You can use not only the (Standard Power Range SPR) for voltages of 5, 9, 15 and 20V with a current of 5A, but also sufficient power in fixed voltages of 28, 36 and 48V with a maximum current of 5A (Extended Power Range - EPR). Thanks to the new PD 3.1 technology, you can also use the cable to power devices with much more power, such as gaming laptops, 4K monitors, power tools or the increasingly popular e-scooters. To identify the cable and its current capabilities, the cable has an integrated E-Mark chip. The cable is also compatible with Quick Charge, PPS, Samsung AFC and SFC, Apple, SMART and other charging technologies. Durable, extended-life bidirectional cable features metal terminals, nickel-plated connectors and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male. Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the connected device. USB 480Mbps (USB 2.0), compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s transmission rates. Supported charging technologies: Power Delivery 2.0/3.0/3.1 - 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, PPS, Samsung Adaptive Fast Charging and Super Fast Charging, Huawei Fast Charge Protocol, Apple Fast Charging, SMART Charging and others. Support Extended Power Range (EPR) specification up to 240W and Standard Power Range (SPR) specification up to 100W. Support for fast charging with a current of up to 5A. Integrated E-MARK chip. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for computers, laptops, mobile phones, tablets, power banks, power tools and other devices with USB-C connector. Other data: cable length 2.5 m, 4.6 mm outer diameter of the cable. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.

<p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Connectors:</strong><br /> • 2x USB-C (M) male. </span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Other features:</strong><br /> • DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the connected device.<br /> • USB 480Mbps (USB 2.0), compatible with USB 1.1. <br /> • Supports 480 / 12 / 1.5 Mb/s transmission rates.<br /> • Supported charging technologies: Power Delivery 2.0/3.0/3.1 - 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, PPS, Samsung Adaptive Fast Charging and Super Fast Charging, Huawei Fast Charge Protocol, Apple Fast Charging, SMART Charging and others.<br /> • Support Extended Power Range (EPR) specification up to 240W and Standard Power Range (SPR) specification up to 100W.<br /> • Support for fast charging with a current of up to 5A.<br /> • Integrated E-MARK chip.<br /> • Cable includes power wires 22AWG, data wires 30AWG. <br /> • Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion.<br /> • Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss.<br /> • Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection.<br /> • Suitable for computers, laptops, mobile phones, tablets, power banks, power tools and other devices with USB-C connector.</span></span></p> <p><span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;"><strong>Other data: </strong><br /> • cable length </span></span>2.5 m<span style="font-family: trebuchet ms,helvetica,sans-serif;"><span style="font-size: 14px;">,<br /> • 4.6 mm outer diameter of the cable.</span></span></p>