1360S propellerid on disainitud hõredama õhuga kõrgematel aladel lendamiseks. Need ei sobi kasutamiseks madalamatel kõrgustel, kuna põhjustab lennuaja vähenemist ning aku kiiremat ülekuumenemist. Ära kasuta samaaegselt tavapropelleritega, kuna see põhjustab drooni juhitavuse kadu.
Features4K video at up to 30fpsRecord at 4096×2160 (24fps) or 3840×2160 (30/25fps)16MP photographs12.8 stops of dynamic rangeRecord the World in RAWThe Zenmuse X5R is a Micro Four Thirds aerial camera capable of recording lossless 4K videos in RAW. With a framerate of up to 30fps and 1.7Gbps average bitrate (2.4Gbps maximum bitrate), the X5R empowers you to capture breathtaking professional-level footage every time. Packed with a powerful MFT sensor, the camera also takes 16MP images with stunning details, while the integrated 3-axis stabilization gimbal keeps the camera level.increased dynamic rangeWith 12.8 stops of dynamic range, shadows and highlights in everything you capture is brought out in perfect clarity.Reduced Compression for Amazing DetailsThe Zenmuse X5R gives you lossless 4K RAW video and crystal clear 16 megapixel photos.Revolutionary SensorBuilt inside the Zenmuse X5R is a powerful Micro Four Thirds sensor. With a sensor eight times the size of that in the previous X3 camera included with the Inspire 1, this new MFT sensor enables high quality, high sensitivity image recording at an ISO range of 100-25600. With a sophisticated balance of high-resolving power, accurate gradation and low noise.Built for the SkyTo create a fully integrated, professional aerial imaging system, the Zenmuse X5R was engineered and designed from the very beginning to be perfectly compatible with the Inspire 1, DJI's most advanced quadcopter. With 360 degree camera movement and dual controller support, the Inspire 1 is the favorite ready-to-fly aerial platform for enthusiasts and professionals worldwide. Now, with a simple installation procedure, you can upgrade the camera on yourInspire 1 to the Zenmuse X5R, vastly increasing its imaging capabilities while retaining its ease of use and reliability.Complete ControlWith the Zenmuse X5R, you have an unprecedented level of control right at your fingertips. In the intuitive auto-focus mode, you can tell the camera to focus on a specific area by simply tapping on the screen
Aerodünaamiliselt optimeeritud ning spetsiaalselt disainitud 9450s propellerid suudavad kaamerat ja muud raskust kanda mängleva kergusega, hoides drooni alati tasakaalus ning kaamera stabiilsena. Ei vaja eraldi lisakinnituse kasutamist droonile lukustamiseks.Komplektis on kaks propellerit - üks päripäeva ning üks vastupäeva pöörlev.
Eigenschaften DJI Gimbal Sicherung (Phantom 3 Standard)Die DJI Gimbal Sicherung / Gimbal Lock ist passend für DJI Phantom 3 StandardZur Sicherung des Gimbals und der Kamera während des Transports Purpose of Use Protection & Storage Material Plastic Colour Transparent
Compatible with the Inspire 1 Remote and TB48/TB47 BatteryApply with the 100W Power Adaptor AC CableSisendpinge100-240Sisendsagedus50/60Väljundvõimsus100 WVäljundpinge26,3 VVäljundvool3,83 AOtstarveBattery chargerSisse/välja lülitiEiÜhilduvusInspire 1 Remote, TB48/TB47 BatteryRoHS-vastavusJahToote värvMustPäritoluriikHiina
Aerodünaamiliselt optimeeritud ning spetsiaalselt disainitud süsinikkiust 9450 propellerid suudavad kaamerat ja muud raskust kanda mängleva kergusega, hoides drooni alati tasakaalus ning kaamera stabiilsena. Ei vaja eraldi lisakinnituse kasutamist droonile lukustamiseks. Komplektis on kaks propellerit.
Aerodünaamiliselt optimeeritud ning spetsiaalselt disainitud süsinikkiust 9450 propellerid suudavad kaamerat ja muud raskust kanda mängleva kergusega, hoides drooni alati tasakaalus ning kaamera stabiilsena. Ei vaja eraldi lisakinnituse kasutamist droonile lukustamiseks. Komplektis on kaks propellerit.
Aerodünaamiliselt optimeeritud ning spetsiaalselt disainitud süsinikkiust 9450 propellerid suudavad kaamerat ja muud raskust kanda mängleva kergusega, hoides drooni alati tasakaalus ning kaamera stabiilsena. Ei vaja eraldi lisakinnituse kasutamist droonile lukustamiseks. Komplektis on kaks propellerit.
Mount the Balancing Ring (23g) onto the Olympus 14-42mm f/3.5-5.6 EZ lens to stabilize the lens on the Zenmuse X5 when shooting.Toote värvMustÜhilduvusOlympus 14-42mm f/3.5-5.6 EZ LensKaal23 g
Mount the Balancing Ring (10g) onto the Panasonic 15mm f/1.7 ASPH prime lens to stabilize the lens on the Zenmuse X5 when shooting.Toote värvMustÜhilduvusPanasonic 15mm f/1.7 ASPH Prime LensLäbimõõt1,5 cmKaal10 g
Achieve Low-Light Aerial CreativityExpand your creative horizons by flying with your Sony α7s and α7r. For the first time, capture beautiful footage in low-light environments with the reliability of a DJI 3-axis aerial stabilization gimbal, the Zenmuse Z15-A7.Unmatched Zenmuse Precision and StabilityZenmuse gimbals are trusted by professional filmmakers and photographers around the world because of their stability, precision, and reliability. We pour all of our experience in aerial filmmaking into every gimbal, giving you perfect stability in any flight conditions.Streaming VideoEngineered and balanced specifically for the Sony α7s and α7r, this lightweight system works with your current tools seamlessly. A HDMI-AV/HD video output module enables live streaming and remote shutter control, and you can switch between AV or HDMI output easily.Complete 360° ControlExperience unhindered camera control at a maximum yaw of ±360°, pitch of +50°/-140°, and a roll of ±40°. With precision control of ±0.01°, you are directing your shots and capturing exactly what you need.Fully Compatible SolutionFly with a DJI S900 or the S1000+ and an advanced flight controller, such as the A2 or WooKong-M, for a seamless, professional experience. Connect the DJI Lightbridge HD digital video downlink or an iOSD Mark II and a 5.8G video link for even more tools on set.Multiple Control ModesChoose the right level of camera maneuverability for every situation. Switching between orientation-locked, non-orientation-locked, and FPV (First Person View) controls is quick and easy.Gimbal Servo Drive ModuleThe Gimbal Servo Drive Module dramatically improves the control and stability of the gimbal while maximizing torque and minimizing vibration. The module is able to achieve such perfection because it has been fine-tuned to the weight and balance of the individual camera that the gimbal was built to support.Built-In Independent IMU Module and Infrared ModuleA new stabilizing algorithm provides stability, and extremely precise induction d
Kvaliteetne liitium-polümeer akuSobib DJI Ronin-M stabilisaatorileSuur 1580 mAh mahutavusIntegreeritud vooluhaldussüsteemidTööaeg kuni 3 tundi ühe laadimisegaIntelligent aku DJI Ronin-M videostabilisaatorile on 1580 mAh mahutavusega ja energiasäästlik ning sobib originaalaku asenduseks või tagavaraakuks, et tööaega veelgi pikendada. Taaslaetav DJI Ronin-M akulaadijaga.Tehnilised andmed: Tüüp: LiPo Mahutavus: 14,4 V, 1580 mAh Laadimistemperatuur: 5–40 °C Töötemperatuur: -5–40 °C Suhteline õhuniiskus töötamisel:
High capacity for up to 23 minutes of flight timeFour LEDS display both the status and the remaining power of the batteryIntegrated power management and balanced charging capabilitySmart charge/discharge functionality helps protect your batteryEasy slot-in design for fast charging and installation/removalUpdated specifically for the Phantom 3 Professional, Phantom 3 Advanced and Phantom 3 StandardThe new generation DJI Intelligent Flight Battery is a 4480mAh, 15.2V LiPo4s battery that is specifically designed for the Phantom 3 series, enabling optimal performance. Supporting up to 23 minutes of flight time, the battery also has built-in sensors and bright LEDs that let you know the status and remaining power of your battery in real time.- High capacity for up to 23 minutes of flight time- Four LEDS display both the status and the remaining power of the battery- Integrated power management and balanced charging capability- Smart charge/discharge functionality helps protect your battery- Easy slot-in design for fast charging and installation/removal- Updated specifically for the Phantom 3 Professional and Phantom 3 Advanced- Batteries must be charged using a DJI approved adapter. DJI takes no responsibility if the battery is charged using a non-DJI charger. Never leave the battery unattended during charging. Do not charge the battery near flammable materials or on flammable surfaces such as carpet or wood.- Do not charge battery immediately after flight, because the battery temperature may be too high. Do not charge the battery until it cools down to near room temperature. The battery cannot be charged outside of the temperature range of 0℃-40℃.- Charge and discharge the battery completely once every 20 charge/discharge cycles. Discharge the battery until there is less than 8% power or until it can no longer be turned on, then recharge it to the maximum capacity. This power cycling procedure will optimize the battery life.- Dispose of the battery into specific recycling boxes only after a complete discharge. Do not place the battery into regular rubbish bins. Strictly follow your local disposal and recycling regulations of batteries.- If the power on/off button of the Intelligent Flight Battery is disabled and the battery cannot be fully discharged, please contact a professional battery disposal/recycling agent for further assistance.Toote tüüpPatareiBrändiühilduvusDJIÜhilduvusPhantom 3 Professional, Phantom 3 Advanced, Phantom 3 StandardToote värvHall, ValgeAkutehnoloogiaLiitiumpolümeer (LiPo)Aku mahutavus4480 mAhAku pinge15,2 VKasutamistemperatuur (T-T)0 - 40 °CKogus1
The performance of your Inspire 1’s Intelligent Flight Battery is subject to environmental factors. Maintaining a suitable temperature (above 20˚C) ensures proper battery performance. Thus the insulation sticker is designed to keep the battery within the temperature range.Ideal scenario is to apply the insulation sticker to the Intelligent Flight Battery when environmental temperatures are lower than 5˚C and remove the sticker when environmental temperatures exceed 5 ˚C.Toote värvMust, ValgeKinnitustüüpPüsifilterTükkide arv2 tk
Small and easy to carry, the Inspire 1 Battery Charging Hub enables you to charge up to four Inspire 1 Intelligent Flight Batteries.When used, the charging hub automatically selects the individual battery with the highest amount of remaining power, and charges it until full before moving on to the next battery.The entire process is monitored and each battery’s status is shown using LED indicators, making the charging process simple and easy.Used together with the Inspire 1 charger and cord. Compatible with TB47 and TB48 battery models.Intelligent charging management, capable of automatically charging up to four batteries.Each battery’s status is shown using LED indicators.Small and easy to carryInternal power management ensures safety at all timesIntegrated port enables future firmware updatesCompatible with both Inspire 1-100W Charger and Inspire 1-180W Rapid ChargerCompatible with both TB47 and TB48 battery modelsToote värvMustEkraanEiToetatud akude arv4TüüpIndoor battery chargerÜhilduvad tootedInspire 1-100W, Inspire 1-180W Rapid Charger, TB47, TB48
UV filter blokeerib ultraviolettkiirguse (200 - 400nm lainepikkus) ning sellega takistab UV valguse sensorile jõudmist. Ultravioletne valgus on küll silmale nähtamatu (nähtava valguse lainepikkus on 380 - 760 nm), kuid siiski võib see pildi kvaliteedile mõjuda, kuna fotoaparaatide sensorid on võimelised UV kiirgust kinni püüdma. Seda eriti situatsioonides, kus UV kiirguse hulk on suurem (puhta õhuga mägedes, kevadel rannikualadel, väiksema osoonikihiga aladel). Tulemuseks on sel juhul tugevam sinine toon ning väiksema teravusega kujutised. Kuna UV filter ei mõjuta kontrastsust ega värvitasakaalu, siis saab seda kombineerida koos teiste filtritega. UV filter sobib ka igapäevaseks objektiivi kaitsefiltriks. Objektiivi ees olev filter takistab mustusel ning niiskusel objektiivi esiklaasile jõudmist ning pakub ka lisakaitset, kui objektiiv peaks kukkuma või situatsioonides, kus on võimalik, et esiklaas saab kriimustada.
- High Definition, Perfect Stability- Built for the Canon 5D Mark III- New HDMI-AV/HD Module- 3-Axis Rotation Control- A Complete Solution- Multiple Control Modes- Gimbal Servo Drive Module- Built-In Independent IMU Module and Infrared ModuleHIGH DEFINITION, PERFECT STABILITYThe Z15-5D III (HD) is a sophisticated gimbal designed specifically for aerial creativity. Its HD video output port and lightweight design enable you to capture beautiful, stable shots for all of your high-level projects.BUILT FOR THE CANON 5D MARK IIIThe Z15-5D III (HD) gimbal is built specifically to hold the Canon 5D Mark III camera, giving you stable footage and precise control within ±0.02°. When used with a professional DJI flight system, it keeps your Mark III secure, steady and under control in even the most difficult of flight conditions.NEW HDMI-AV/HD MODULEGet real-time HD video while controlling the camera with a built-in video output module that is perfectly compatible with the DJI Lightbridge HD digital video downlink. First-person-view flying is available in both HD and AV, and the AV output works with any 5.8G analog video downlink.3-AXIS ROTATION CONTROLThe 3-axis Zenmuse system’s creative mechanical design makes control both intuitive and easy. A tail potentiometer greatly increases stability and precision, while internal slip rings replace complicated wiring. All power and signal lines have been integrated into gimbal itself, resulting in a completely free control axis that offers a maximum yaw of ±360°, pitch of -120° to +15°, and a roll of ±25°.A COMPLETE SOLUTIONThe Zenmuse Z15-5D III (HD) is ideal for the DJI S1000 flight platform and the A2 or WooKong-M flight controllers. Attach the DJI Lightbridge HD digital video downlink, or an iOSD Mark II and a 5.8G analog video link, for a complete solution to your aerial photography and cinematography needs.MULTIPLE CONTROL MODESThree control modes expand your creative boundaries and ensure ease of flight. Orientation-locked, Non Orientation-locked, and Back to Mid-point modes can be switched to on the fly, easily adjusting to the needs of each shoot.GIMBAL SERVO DRIVE MODULEEvery Zenmuse gimbal gets its precision from DJI’s custom designed Gimbal Servo Drive Module. Each module is tailored to the weight and balance of the specific camera the gimbal has been designed to hold. This significantly improves control and stability while maximizing torque and minimizing vibrations.BUILT-IN INDEPENDENT IMU MODULE AND INFRARED MODULEA new stabilizing algorithm has been utilized, which together with the extremely precise machinery gives you effortless control. Because the IMU is built in, your gimbal requires no extra equipment or wiring, reducing weight and allowing you to start shooting faster. The shutter can be controlled remotely by an infrared receiver.Toote värvMustPööratavusJahKaal1,53 kgLaius281 mmSügavus222 mmKõrgus242 mm
Intelligent aku DJI Osmo seikluskaamerale on 980 mAh mahutavusega ja energiasäästlik ning sobib originaalaku asenduseks või tagavaraakuks, et filmimise aega veelgi pikendada. Taaslaetav DJI Osmo Intelligent akulaadijaga.
