Otsing: thermal pad (arhiveeritud tooted)

The GPU block for your new set up! The Bykski iGame RTX 2070 Gaming GT GPU Cooler is a powerful complete graphic card cooler especially developed for the IGAME 2070 GAMING GT . Its large-scale channels and improved flow ensure efficient cooling of the GPU, voltage transformers and graphic card memorys.The nickel-plated heat sink made of solid copper is covered by an acrylic glass lid transparent, giving it an elegant and sophisticated appearanceto the cooler. The cooler's connector terminal has four G1 / 4 threaded holes, allowing the graphic card cooler to work in SLI mode.The radiator can be illuminated via a mainboard or through the optionally available controller using the supplied RBW LED strip. Only for LED Note! Bykski LED modules are designed to operate at only 5V. For operation, either an adapter cable (3 pin 5V ADD header) or a compatible controller would be required. Attention! The 5 Volt LED modules must NOT be connected to a 12 Volt power source, as this leads to an immediate destruction of the LED module by the overload!! Scope of delivery: 1x Full Cover GPU Block 2x dummy plugs 1x mounting material 1x thermal pads 1x Instructions manual 1x RBW LED strip

The GPU block for your new set up! The Bykski N-IG2080AOC-X,Full Cover GPU Cooler is a powerful complete graphic card cooler especially developed for the Colorful iGame RTX2080/2070/2060 Advanced/Ultra/AD Special. Its large-scale channels and improved flow ensure efficient cooling of the GPU, voltage transformers and graphic card memorys.The nickel-plated heat sink made of solid copper is covered by an acrylic glass lid transparent, giving it an elegant and sophisticated appearanceto the cooler. The cooler's connector terminal has four G1 / 4 threaded holes, allowing the graphic card cooler to work in SLI mode.The radiator can be illuminated via a mainboard or through the optionally available controller using the supplied RBW LED strip. Note! Bykski LED modules are designed to operate at only 5V. For operation, either an adapter cable (3 pin 5V ADD header) or a compatible controller would be required. Attention! The 5 Volt LED modules must NOT be connected to a 12 Volt power source, as this leads to an immediate destruction of the LED module by the overload!! Scope of delivery: 1x Full Cover GPU Block 2x dummy plugs 1x mounting material 1x thermal pads 1x Instructions manual 1x RBW LED strip

The GPU block for your new set up! The Bykski N-IG2060U-X, Full Cover GPU Cooler is a powerful complete graphic card cooler especially developed for the Colorful iGame RTX2060/GTX1660Ti Ultra/Advanced OC. Its large-scale channels and improved flow ensure efficient cooling of the GPU, voltage transformers and graphic card memorys.The nickel-plated heat sink made of solid copper is covered by an acrylic glass lid transparent, giving it an elegant and sophisticated appearanceto the cooler. The cooler's connector terminal has four G1 / 4 threaded holes, allowing the graphic card cooler to work in SLI mode.The radiator can be illuminated via a mainboard or through the optionally available controller using the supplied RBW LED strip. Note! Bykski LED modules are designed to operate at only 5V. For operation, either an adapter cable (3 pin 5V ADD header) or a compatible controller would be required. Attention! The 5 Volt LED modules must NOT be connected to a 12 Volt power source, as this leads to an immediate destruction of the LED module by the overload!! Scope of delivery: 1x Full Cover GPU Block 2x dummy plugs 1x mounting material 1x thermal pads 1x Instructions manual 1x RBW LED strip

The GPU block for your new set up! The Bykski N-IG2070U-X, Full Cover GPU Cooler is a powerful complete graphic card cooler especially developed for the Colorful iGame RTX 2070 Ultra OC. Its large-scale channels and improved flow ensure efficient cooling of the GPU, voltage transformers and graphic card memorys.The nickel-plated heat sink made of solid copper is covered by an acrylic glass lid transparent, giving it an elegant and sophisticated appearanceto the cooler. The cooler's connector terminal has four G1 / 4 threaded holes, allowing the graphic card cooler to work in SLI mode.The radiator can be illuminated via a mainboard or through the optionally available controller using the supplied RBW LED strip. Note! Bykski LED modules are designed to operate at only 5V. For operation, either an adapter cable (3 pin 5V ADD header) or a compatible controller would be required. Attention! The 5 Volt LED modules must NOT be connected to a 12 Volt power source, as this leads to an immediate destruction of the LED module by the overload!! Scope of delivery: 1x Full Cover GPU Block 2x dummy plugs 1x mounting material 1x thermal pads 1x Instructions manual 1x RBW LED strip

The GPU block for your new set up! The Bykski MSI RTX 2080TI Gaming X Trio GPU Cooler is a powerful complete graphic card cooler especially developed for the MSI 2080TI Gaming X Trio . Its large-scale channels and improved flow ensure efficient cooling of the GPU, voltage transformers and graphic card memorys.The nickel-plated heat sink made of solid copper is covered by an acrylic glass lid transparent, giving it an elegant and sophisticated appearanceto the cooler. The cooler's connector terminal has four G1 / 4 threaded holes, allowing the graphic card cooler to work in SLI mode.The radiator can be illuminated via a mainboard or through the optionally available controller using the supplied RBW LED strip. Only for LED Note! Bykski LED modules are designed to operate at only 5V. For operation, either an adapter cable (3 pin 5V ADD header) or a compatible controller would be required. Attention! The 5 Volt LED modules must NOT be connected to a 12 Volt power source, as this leads to an immediate destruction of the LED module by the overload!! Scope of delivery: 1x Full Cover GPU Block 2x dummy plugs 1x mounting material 1x thermal pads 1x Instructions manual 1x RBW LED strip

The GPU block for your new set up! The Bykski MSI 2070 ARMOR GPU Cooler is a powerful complete graphic card cooler especially developed for the MSI 2070 Armor . Its large-scale channels and improved flow ensure efficient cooling of the GPU, voltage transformers and graphic card memorys.The nickel-plated heat sink made of solid copper is covered by an acrylic glass lid transparent, giving it an elegant and sophisticated appearanceto the cooler. The cooler's connector terminal has four G1 / 4 threaded holes, allowing the graphic card cooler to work in SLI mode.The radiator can be illuminated via a mainboard or through the optionally available controller using the supplied RBW LED strip. Only for LED Note! Bykski LED modules are designed to operate at only 5V. For operation, either an adapter cable (3 pin 5V ADD header) or a compatible controller would be required. Attention! The 5 Volt LED modules must NOT be connected to a 12 Volt power source, as this leads to an immediate destruction of the LED module by the overload!! Scope of delivery: 1x Full Cover GPU Block 2x dummy plugs 1x mounting material 1x thermal pads 1x Instructions manual 1x RBW LED strip

The GPU block for your new set up! The Bykski GIGABYTE AORUS 2080TI GPU Cooler is a powerful complete graphic card cooler especially developed for the Gigabyte Aorus 2080TI. Its large-scale channels and improved flow ensure efficient cooling of the GPU, voltage transformers and graphic card memorys.The nickel-plated heat sink made of solid copper is covered by an acrylic glass lid transparent, giving it an elegant and sophisticated appearanceto the cooler. The cooler's connector terminal has four G1 / 4 threaded holes, allowing the graphic card cooler to work in SLI mode.The radiator can be illuminated via a mainboard or through the optionally available controller using the supplied RBW LED strip. Only for LED Note! Bykski LED modules are designed to operate at only 5V. For operation, either an adapter cable (3 pin 5V ADD header) or a compatible controller would be required. Attention! The 5 Volt LED modules must NOT be connected to a 12 Volt power source, as this leads to an immediate destruction of the LED module by the overload!! Scope of delivery: 1x Full Cover GPU Block 2x dummy plugs 1x mounting material 1x thermal pads 1x Instructions manual 1x RBW LED strip

The GPU block for your new set up! The Bykski GIGABYTE AORUS 2080 GPU Cooler is a powerful complete graphic card cooler especially developed for the Gigabyte Aorus 2080. Its large-scale channels and improved flow ensure efficient cooling of the GPU, voltage transformers and graphic card memorys.The nickel-plated heat sink made of solid copper is covered by an acrylic glass lid transparent, giving it an elegant and sophisticated appearanceto the cooler. The cooler's connector terminal has four G1 / 4 threaded holes, allowing the graphic card cooler to work in SLI mode.The radiator can be illuminated via a mainboard or through the optionally available controller using the supplied RBW LED strip. Only for LED Note! Bykski LED modules are designed to operate at only 5V. For operation, either an adapter cable (3 pin 5V ADD header) or a compatible controller would be required. Attention! The 5 Volt LED modules must NOT be connected to a 12 Volt power source, as this leads to an immediate destruction of the LED module by the overload!! Scope of delivery: 1x Full Cover GPU Block 2x dummy plugs 1x mounting material 1x thermal pads 1x Instructions manual 1x RBW LED strip

The GPU block for your new set up! The Bykski ZOTAC 2080 PLUS OC GPU Cooler is a powerful complete graphic card cooler especially developed for the Zotac 2080 PLUS OC. Its large-scale channels and improved flow ensure efficient cooling of the GPU, voltage transformers and graphic card memorys.The nickel-plated heat sink made of solid copper is covered by an acrylic glass lid transparent, giving it an elegant and sophisticated appearanceto the cooler. The cooler's connector terminal has four G1 / 4 threaded holes, allowing the graphic card cooler to work in SLI mode.The radiator can be illuminated via a mainboard or through the optionally available controller using the supplied RBW LED strip. Note! Bykski LED modules are designed to operate at only 5V. For operation, either an adapter cable (3 pin 5V ADD header) or a compatible controller would be required. Attention! The 5 Volt LED modules must NOT be connected to a 12 Volt power source, as this leads to an immediate destruction of the LED module by the overload!! Scope of delivery: 1x Full Cover GPU Block 2x dummy plugs 1x mounting material 1x thermal pads 1x Instructions manual 1x RBW LED strip

The GPU block for your new set up! The Bykski ZOTAC 2070 GAMING OC GPU Cooler is a powerful complete graphic card cooler especially developed for the Zotac 2070 Gaming OC . Its large-scale channels and improved flow ensure efficient cooling of the GPU, voltage transformers and graphic card memorys.The nickel-plated heat sink made of solid copper is covered by an acrylic glass lid transparent, giving it an elegant and sophisticated appearanceto the cooler. The cooler's connector terminal has four G1 / 4 threaded holes, allowing the graphic card cooler to work in SLI mode.The radiator can be illuminated via a mainboard or through the optionally available controller using the supplied RBW LED strip. Note! Bykski LED modules are designed to operate at only 5V. For operation, either an adapter cable (3 pin 5V ADD header) or a compatible controller would be required. Attention! The 5 Volt LED modules must NOT be connected to a 12 Volt power source, as this leads to an immediate destruction of the LED module by the overload!! Scope of delivery: 1x Full Cover GPU Block 2x dummy plugs 1x mounting material 1x thermal pads 1x Instructions manual 1x RBW LED strip

The GPU block for your new set up! The Bykski ZOTAC 2070 MINI OC GPU Cooler is a powerful complete graphic card cooler especially developed for the ZOTAC RTX 2070-8GD6 MINI OC . Its large-scale channels and improved flow ensure efficient cooling of the GPU, voltage transformers and graphic card memorys.The nickel-plated heat sink made of solid copper is covered by an acrylic glass lid transparent, giving it an elegant and sophisticated appearanceto the cooler. The cooler's connector terminal has four G1 / 4 threaded holes, allowing the graphic card cooler to work in SLI mode.The radiator can be illuminated via a mainboard or through the optionally available controller using the supplied RBW LED strip. Only for LED Note! Bykski LED modules are designed to operate at only 5V. For operation, either an adapter cable (3 pin 5V ADD header) or a compatible controller would be required. Attention! The 5 Volt LED modules must NOT be connected to a 12 Volt power source, as this leads to an immediate destruction of the LED module by the overload!! Scope of delivery: 1x Full Cover GPU Block 2x dummy plugs 1x mounting material 1x thermal pads 1x Instructions manual 1x RBW LED strip

The GPU block for your new set up! The Bykski ZOTAC RTX 2060 PLUS OC GPU Cooler is a powerful complete graphic card cooler especially developed for the Zotac 2060 PLUS OC . Its large-scale channels and improved flow ensure efficient cooling of the GPU, voltage transformers and graphic card memorys.The nickel-plated heat sink made of solid copper is covered by an acrylic glass lid transparent, giving it an elegant and sophisticated appearanceto the cooler. The cooler's connector terminal has four G1 / 4 threaded holes, allowing the graphic card cooler to work in SLI mode.The radiator can be illuminated via a mainboard or through the optionally available controller using the supplied RBW LED strip. Note! Bykski LED modules are designed to operate at only 5V. For operation, either an adapter cable (3 pin 5V ADD header) or a compatible controller would be required. Attention! The 5 Volt LED modules must NOT be connected to a 12 Volt power source, as this leads to an immediate destruction of the LED module by the overload!! Scope of delivery: 1x Full Cover GPU Block 2x dummy plugs 1x mounting material 1x thermal pads 1x Instructions manual 1x RBW LED strip

The GPU block for your new set up! The Bykski N-ST2060HB-X, Full Cover GPU Cooler is a powerful complete graphic card cooler especially developed for the Zotac RTX2060-6GD6 OC HB/GTX1660Ti-6GD6 OC HA. Its large-scale channels and improved flow ensure efficient cooling of the GPU, voltage transformers and graphic card memorys.The nickel-plated heat sink made of solid copper is covered by an acrylic glass lid transparent, giving it an elegant and sophisticated appearanceto the cooler. The cooler's connector terminal has four G1 / 4 threaded holes, allowing the graphic card cooler to work in SLI mode.The radiator can be illuminated via a mainboard or through the optionally available controller using the supplied RBW LED strip. Note! Bykski LED modules are designed to operate at only 5V. For operation, either an adapter cable (3 pin 5V ADD header) or a compatible controller would be required. Attention! The 5 Volt LED modules must NOT be connected to a 12 Volt power source, as this leads to an immediate destruction of the LED module by the overload!! Scope of delivery: 1x Full Cover GPU Block 2x dummy plugs 1x mounting material 1x thermal pads 1x Instructions manual 1x RBW LED strip

Enzotech has once again brought an innovation to the market which is yet to be matched! This all-copper cooler is the perfect cooling solution for Mainboards which are equipped with passive stock coolers. The cooling pins of the cooler are 30mm high and offer great cooling performance. The contact surface of the cooler is polished to a mirror finish. The plane and smooth surface makes the use of thermal pads obsolete, the included thermal compound can be used. The handy thing about this cooler are the different mounts: They have a diagonal hole distance of 49,7mm, 59mm or 67,4mm. These three mounts can easily be exchanged, giving this cooler a wide variety of applications. Mounting material is also included with this cooler. Technical specifications: Material: Copper Dimensions (L x H): 44,7mm x 30mm Weight: 126g Hole distance: 49,7mm, 59mm or 67,4mm Extent of delivery: 1x Enzotech CNB-R1 Northbridge cooler 1x Thermal compound Mounting material

Enzotech has once again brought an innovation to the market which is yet to be matched! This all-copper cooler is the perfect cooling solution for Mainboards which are equipped with passive stock coolers. The cooling pins of the cooler are 27,6mm high and offer great cooling performance. The contact surface of the cooler is polished to a mirror finish. The plane and smooth surface makes the use of thermal pads obsolete, the included thermal compound can be used. The mount has a diagonal hole distance of 54,6mm Technical specifications: Material: Copper Dimensions (L x W x H): 36,mm x 36mm x 27,6mm Weight: 88g Hole distance: 53-59mm Extent of delivery: 1x Enzotech CNB-S1 Northbridge cooler 1x Thermal compound Mounting material

Enzotech has once again brought an innovation to the market which is yet to be matched! This all-copper cooler is the perfect cooling solution for Mainboards which are equipped with passive stock coolers. The cooling pins of the cooler are 11,6mm high and offer great cooling performance. The contact surface of the cooler is polished to a mirror finish. The plane and smooth surface makes the use of thermal pads obsolete, the included thermal compound can be used. The mount has a diagonal hole distance of 54,6mm Technical specifications: Material: Copper Dimensions (L x W x H): 36,mm x 36mm x 11,6mm Weight: 50g Hole distance: 54,6 Extent of delivery: 1x Enzotech CNB-S1L Northbridge cooler 1x Thermal compound Mounting material

The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The pricing of the new series is also pleasantly affordable. New revision: New cool design More robust materials for even longer lifespan Lowered noise emissions Suitable for continuous operation Noise emissions: The small chillers (like HC150) have a noise emission of 20dB(A) only and can be used near the computer / aquarium without disturbing. Bigger models (like HC500) should be additionally decoupled to reduce the noise level if necessary The models HC1000 und HC 2000 should be extra decoupled or maintained in a seperate room. This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem. Thanks to the low temperatures incredible overclocking potential is available! The lifespan of the components is extended by multiples. This system is also great for no-noise applications as the chiller can be located in another room. We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation. To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware. CPU: 80W (standard) to 150W (overclocked) GPU: 50W (small cards) to 250W (GTX 980) MB: 20 to 40W per component The added values of your system must not exceed the given cooling capability of the chiller. What aquarium size can be cooled with my water chiller? The manufacturer provides the following data: Model / aquarium size in liters: HC-130 / 50-100L HC-150 / 50-200L HC-250 / 100-300L HC-300 / 100-400L HC-500 / 200-800L HC-1000 / 300-1000L HC-2000 / 400-1500L We at Aquatuning wish to advise you that the manufacturer’s data was obtained under optimal circumstances. The temperature response of the aquarium may greatly vary because of insulation, heat from lights respectively sunlight. Hence we recommend using the larger model when reaching the upper limit of the aquarium size values. Notes regarding shipment: For shipping via parcel delivery (GLS) we have manufactured a specially padded carton. For handling and packaging we must charge 15€ incl. VAT. This charge is not charged when the Chiller is picked up or with pallet shipment if the chiller is shipped without the special packaging. Note regarding shipping: This unit can only be shipped via a forwarding company. As the chipping charges differ by distance an online calculation is not possible. Please provide your full telephone number and E-Mail address when ordering, we will contact you after the order is complete. The shipping charge is approximately 50€ within Germany. Technical specifications: Power: 1/10 PS Cooling capacity: 165W Recommended coolant flow: 250-1200 l/h Weight: 15kg Cooling agent: R134A Dimensions: 420x248x365mm (LxWxH) Connector outside diameter: 11-13mm and 14-17mm Heat exchanger material: Titanium max. compressive load: 0,8bar Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps current demand: 1.1 A (50 Hz) current drain: 253 W Scope of Delivery 1x Waterchiller Hailea Ultra Titan 200 2x 45° angle with rubber seal (11-13mm) 2x 45° angle with rubber seal (14-17mm) 2x suitable hose clamps Note for first-time users: If you should have problems with your chiller please contact us before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product! Note for aquarium-use: The cooling performance is affected by the aquarium-lamp the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the ciller at least on power-lever higher that theoretically calculated This product has been reviewed for you (by): Overclockingstation Zockon bit-tech (engl.) How2 (Userreview): Hardwareluxx

The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The pricing of the new series is also pleasantly affordable. New revision: New cool design More robust materials for even longer lifespan Lowered noise emissions Suitable for continuous operation Noise emissions: The small chillers (like HC150) have a noise emission of 20dB(A) only and can be used near the computer / aquarium without disturbing. Bigger models (like HC500) should be additionally decoupled to reduce the noise level if necessary The models HC1000 und HC 2000 should be extra decoupled or maintained in a seperate room. This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem. Thanks to the low temperatures incredible overclocking potential is available! The lifespan of the components is extended by multiples. This system is also great for no-noise applications as the chiller can be located in another room. We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation. To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware. CPU: 80W (standard) to 150W (overclocked) GPU: 50W (small cards) to 250W (current models such as GTX 980) MB: 20 to 40W per component The added values of your system must not exceed the given cooling capability of the chiller. What aquarium size can be cooled with my water chiller? The manufacturer provides the following data: Model / aquarium size in liters: HC-130 / 50-100L HC-150 / 50-200L HC-250 / 100-300L HC-300 / 100-400L HC-500 / 200-800L HC-1000 / 300-1000L HC-2000 / 400-1500L We at Aquatuning wish to advise you that the manufacturer’s data was obtained under optimal circumstances. The temperature response of the aquarium may greatly vary because of insulation, heat from lights respectively sunlight. Hence we recommend using the larger model when reaching the upper limit of the aquarium size values. Notes regarding shipment: For shipping via parcel delivery (GLS) we have manufactured a specially padded carton. For handling and packaging we must charge 15€ incl. VAT. This charge is not charged when the Chiller is picked up or with pallet shipment if the chiller is shipped without the special packaging. Note regarding shipping: This unit can only be shipped via a forwarding company. As the chipping charges differ by distance an online calculation is not possible. Please provide your full telephone number and E-Mail address when ordering, we will contact you after the order is complete. The shipping charge is approximately 50€ within Germany. Technical specifications: Power: 1/2 PS Cooling capacity: 110W Recommended coolant flow: 200-1000 l/h Weight: 9,2kg Cooling agent: R134A Dimensions: 338x218x325mm (LxWxH) Connector outside diameter: 11-13mm Heat exchanger material: Titanium max. compressive load: 0,8bar Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps current demand: 0.8 A (50 Hz) current drain: 184 W Scope of Delivery 1x Waterchiller Hailea Ultra Titan 150 2x 45° angle with rubber seal 2x 45° angle without rubber seal 2x suitable hose clamps Note for first-time users: If you should have problems with your chiller please contact us before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product! Note for aquarium-use: The cooling performance is affected by the aquarium-lamp the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the ciller at least on power-lever higher that theoretically calculated This product has been reviewed for you (by): Overclockingstation Zockon bit-tech (engl.) How2 (Userreview): Hardwareluxx

The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The pricing of the new series is also pleasantly affordable. New revision New cool design More robust materials for even longer lifespan Lowered noise emissions Suitable for continuous operation Noise emissions The small chillers (like HC150) have a noise emission of 20dB(A) only and can be used near the computer / aquarium without disturbing. Bigger models (like HC500) should be additionally decoupled to reduce the noise level if necessary The models HC1000 und HC 2000 should be extra decoupled or maintained in a seperate room. This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem. Thanks to the low temperatures incredible overclocking potential is available! The lifespan of the components is extended by multiples. This system is also great for no-noise applications as the chiller can be located in another room. We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation. To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware. CPU: 80W (standard) to 150W (overclocked) GPU: 50W (small cards) to 250W (GTX 980) MB: 20 to 40W per component The added values of your system must not exceed the given cooling capability of the chiller. What aquarium size can be cooled with my water chiller? The manufacturer provides the following data: Model / aquarium size in liters: HC-130 / 50-100L HC-150 / 50-200L HC-250 / 100-300L HC-300 / 100-400L HC-500 / 200-800L HC-1000 / 300-1000L HC-2000 / 400-1500L We at Aquatuning wish to advise you that the manufacturer’s data was obtained under optimal circumstances. The temperature response of the aquarium may greatly vary because of insulation, heat from lights respectively sunlight. Hence we recommend using the larger model when reaching the upper limit of the aquarium size values. Notes regarding shipment For shipping via parcel delivery (GLS) we have manufactured a specially padded carton. For handling and packaging we must charge 15€ incl. VAT. This charge is not charged when the Chiller is picked up or with pallet shipment if the chiller is shipped without the special packaging. Note regarding shipping This unit can only be shipped via a forwarding company. As the chipping charges differ by distance an online calculation is not possible. Please provide your full telephone number and E-Mail address when ordering, we will contact you after the order is complete. The shipping charge is approximately 50€ within Germany. Technical specifications Power: 2 HP Cooling capacity: 3300W Recommended coolant flow: 3000-6000 l/h Weight: 47kg Dimensions: 634x468x590mm (LxWxH) Connector outside diameter: 30-33mm Heat exchanger material: Titanium max. compressive load: 0,8bar Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps current demand: 7 A (50 Hz) current drain: 1610 W Scope of Delivery: 1x Waterchiller Hailea Ultra Titan 4000 2x 45° angle with rubber seal 2x straight with rubber seal 2x suitable hose clamps Please note that this device required a 16A fuse in its loop. Should an additional device be connected to this fuse the fuse may be triggered. Extent of delivery 1x Waterchiller 4x Barbed fittings 2x Hose clamps 1x Outlet hose English illustrated manual Notice regarding shipping This item can only be shipped through a freight forwarding service. Since shipping costs will vary by distance, online price calculation is not possible at this time. Please give your full telephone number and email address when placing your order. We will contact you after your order is placed. Shipping costs can add up to ca. 25€ within Germany. Freight forwarding costs will be specified during the ordering process. In case of returns This item can only be sent via a freight forwarding service! Should you need to return the item, please make use of a forwarding agency! Items returned to us via parcel service will not be accepted, as shipping them through a parcel delivery service will damage the device! Please note The unit is not equipped with a power plug. We recommend an isolated ground connector (Item No. 84002). Note for first-time users If you should have problems with your chiller please contact us before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product! Note for aquarium-use The cooling performance is affected by the aquarium-lamp the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the ciller at least one power-lever higher that theoretically calculated This product has been reviewed for you (by) Overclockingstation Zockon bit-tech (engl.) How2 (Userreview) Hardwareluxx

The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The pricing of the new series is also pleasantly affordable. New revision: New cool design - white More robust materials for even longer lifespan Lowered noise emissions Suitable for continuous operation Noise emissions: The small chillers (like HC150) have a noise emission of 20dB(A) only and can be used near the computer / aquarium without disturbing. Bigger models (like HC500) should be additionally decoupled to reduce the noise level if necessary The models HC1000 und HC 2000 should be extra decoupled or maintained in a seperate room. This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem. Thanks to the low temperatures incredible overclocking potential is available! The lifespan of the components is extended by multiples. This system is also great for no-noise applications as the chiller can be located in another room. We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation. To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware. CPU: 80W (standard) to 150W (overclocked) GPU: 50W (small cards) to 250W (GTX 980) MB: 20 to 40W per component The added values of your system must not exceed the given cooling capability of the chiller. What aquarium size can be cooled with my water chiller? The manufacturer provides the following data: Model / aquarium size in liters: HC-130 / 50-100L HC-150 / 50-200L HC-250 / 100-300L HC-300 / 100-400L HC-500 / 200-800L HC-1000 / 300-1000L HC-2000 / 400-1500L We at Aquatuning wish to advise you that the manufacturer’s data was obtained under optimal circumstances. The temperature response of the aquarium may greatly vary because of insulation, heat from lights respectively sunlight. Hence we recommend using the larger model when reaching the upper limit of the aquarium size values. Notes regarding shipment: For shipping via parcel delivery (GLS) we have manufactured a specially padded carton. For handling and packaging we must charge 15€ incl. VAT. This charge is not charged when the Chiller is picked up or with pallet shipment if the chiller is shipped without the special packaging. Technical specifications: Power: 1/10 PS Cooling capacity: 165W Recommended coolant flow: 250-1200 l/h Weight: 15kg Cooling agent: R134A Dimensions: 420 x 248 x 365mm (LxWxH) Connector outside diameter: 11-13mm Heat exchanger material: Titanium max. compressive load: 0,8bar Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps Current demand: 1.1 A (50 Hz) Current drain: 253 W Scope of Delivery: 1x Waterchiller Hailea Ultra Titan 150 White Special Edition 2x 45° angle with rubber seal 2x 45° angle without rubber seal 2x suitable hose clamps Note for first-time users: If you should have problems with your chiller please contact us before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product! Note for aquarium-use: The cooling performance is affected by the aquarium-lamp the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the ciller at least on power-lever higher that theoretically calculated This product has been reviewed for you (by): Overclockingstation Zockon bit-tech (engl.) How2 (Userreview): Hardwareluxx

The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The pricing of the new series is also pleasantly affordable. New revision: New cool design - white More robust materials for even longer lifespan Lowered noise emissions Suitable for continuous operation Noise emissions: The small chillers (like HC150) have a noise emission of 20dB(A) only and can be used near the computer / aquarium without disturbing. Bigger models (like HC500) should be additionally decoupled to reduce the noise level if necessary The models HC1000 und HC 2000 should be extra decoupled or maintained in a seperate room. This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem. Thanks to the low temperatures incredible overclocking potential is available! The lifespan of the components is extended by multiples. This system is also great for no-noise applications as the chiller can be located in another room. We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation. To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware. CPU: 80W (standard) to 150W (overclocked) GPU: 50W (small cards) to 250W (GTX 980) MB: 20 to 40W per component The added values of your system must not exceed the given cooling capability of the chiller. What aquarium size can be cooled with my water chiller? The manufacturer provides the following data: Model / aquarium size in liters: HC-130 / 50-100L HC-150 / 50-200L HC-250 / 100-300L HC-300 / 100-400L HC-500 / 200-800L HC-1000 / 300-1000L HC-2000 / 400-1500L We at Aquatuning wish to advise you that the manufacturer’s data was obtained under optimal circumstances. The temperature response of the aquarium may greatly vary because of insulation, heat from lights respectively sunlight. Hence we recommend using the larger model when reaching the upper limit of the aquarium size values. Notes regarding shipment: For shipping via parcel delivery (GLS) we have manufactured a specially padded carton. For handling and packaging we must charge 15€ incl. VAT. This charge is not charged when the Chiller is picked up or with pallet shipment if the chiller is shipped without the special packaging. Technical specifications: Power: 1/10 PS Cooling capacity: 165W Recommended coolant flow: 250-1200 l/h Weight: 15kg Cooling agent: R134A Dimensions: 420 x 248 x 365mm (LxWxH) Connector outside diameter: 11-13mm and 14-17mm Heat exchanger material: Titanium max. compressive load: 0,8bar Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps Current demand: 1.1 A (50 Hz) Current drain: 253 W Scope of Delivery: 1x Waterchiller Hailea Ultra Titan 200 - White Special Edition 2x 45° angle with rubber seal (11-13mm) 2x 45° angle with rubber seal (14-17mm) 2x suitable hose clamps Note for first-time users: If you should have problems with your chiller please contact us before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product! Note for aquarium-use: The cooling performance is affected by the aquarium-lamp the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the ciller at least on power-lever higher that theoretically calculated This product has been reviewed for you (by): Overclockingstation Zockon bit-tech (engl.) How2 (Userreview): Hardwareluxx

The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The pricing of the new series is also pleasantly affordable. New revision: New cool design - white More robust materials for even longer lifespan Lowered noise emissions Suitable for continuous operation Noise emissions: The small chillers (like HC150) have a noise emission of 20dB(A) only and can be used near the computer / aquarium without disturbing. Bigger models (like HC500) should be additionally decoupled to reduce the noise level if necessary The models HC1000 und HC 2000 should be extra decoupled or maintained in a seperate room. This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem. Thanks to the low temperatures incredible overclocking potential is available! The lifespan of the components is extended by multiples. This system is also great for no-noise applications as the chiller can be located in another room. We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation. To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware. CPU: 80W (standard) to 150W (overclocked) GPU: 50W (small cards) to 250W (GTX 980) MB: 20 to 40W per component The added values of your system must not exceed the given cooling capability of the chiller. What aquarium size can be cooled with my water chiller? The manufacturer provides the following data: Model / aquarium size in liters: HC-130 / 50-100L HC-150 / 50-200L HC-250 / 100-300L HC-300 / 100-400L HC-500 / 200-800L HC-1000 / 300-1000L HC-2000 / 400-1500L We at Aquatuning wish to advise you that the manufacturer’s data was obtained under optimal circumstances. The temperature response of the aquarium may greatly vary because of insulation, heat from lights respectively sunlight. Hence we recommend using the larger model when reaching the upper limit of the aquarium size values. Notes regarding shipment: For shipping via parcel delivery (GLS) we have manufactured a specially padded carton. For handling and packaging we must charge 15€ incl. VAT. This charge is not charged when the Chiller is picked up or with pallet shipment if the chiller is shipped without the special packaging. Technical specifications: Power: 1/6 HP Power consumption: 150W Cooling capacity: 265W (suitable for extreme OC and cooling) Recommended coolant flow: 600-2200 l/h Weight: 18kg Cooling agent: R134A Dimensions: 448 x 330 x 440mm (LxWxH) Connector outside diameter: 18-20mm Heat exchanger material: Titanium max. compressive load: 0,8bar Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps Current demand: 1.3 A (50 Hz) Current drain: 299 W Scope of Delivery: 1x waterchiller Hailea Ultra Titan 300 - White Special Edition 2x 45° angle with rubber seal 2x rubber seal with G1/4" internal thread 2x suitable hose clamps Note for first-time users: If you should have problems with your chiller please contact us before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product! Note for aquarium-use: The cooling performance is affected by the aquarium-lamp the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the ciller at least on power-lever higher that theoretically calculated This product has been reviewed for you (by): Overclockingstation Zockon bit-tech (engl.) How2 (Userreview): Hardwareluxx

The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The pricing of the new series is also pleasantly affordable. New revision: New cool design - white More robust materials for even longer lifespan Lowered noise emissions Suitable for continuous operation Noise emissions: The small chillers (like HC150) have a noise emission of 20dB(A) only and can be used near the computer / aquarium without disturbing. Bigger models (like HC500) should be additionally decoupled to reduce the noise level if necessary The models HC1000 und HC 2000 should be extra decoupled or maintained in a seperate room. This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem. Thanks to the low temperatures incredible overclocking potential is available! The lifespan of the components is extended by multiples. This system is also great for no-noise applications as the chiller can be located in another room. We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation. To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware. CPU: 80W (standard) to 150W (overclocked) GPU: 50W (small cards) to 250W (GTX 980) MB: 20 to 40W per component The added values of your system must not exceed the given cooling capability of the chiller. What aquarium size can be cooled with my water chiller? The manufacturer provides the following data: Model / aquarium size in liters: HC-130 / 50-100L HC-150 / 50-200L HC-250 / 100-300L HC-300 / 100-400L HC-500 / 200-800L HC-1000 / 300-1000L HC-2000 / 400-1500L We at Aquatuning wish to advise you that the manufacturer’s data was obtained under optimal circumstances. The temperature response of the aquarium may greatly vary because of insulation, heat from lights respectively sunlight. Hence we recommend using the larger model when reaching the upper limit of the aquarium size values. Notes regarding shipment: For shipping via parcel delivery (GLS) we have manufactured a specially padded carton. For handling and packaging we must charge 15€ incl. VAT. This charge is not charged when the Chiller is picked up or with pallet shipment if the chiller is shipped without the special packaging. Technical specifications: Power: 1/4 HP Power consumption: 190W Cooling capacity: 390W (suitable for extreme OC and cooling) Recommended coolant flow: 500-2500 l/h Weight: 18,6kg Cooling agent: R134A Dimensions: 448x330x440mm (LxWxH) Connector outside diameter: 18-20mm Heat exchanger material: Titanium max. compressive load: 0,8bar Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps Current demand: 1.8 A (50 Hz) Current drain: 414 W Scope of Delivery: 1x waterchiller Hailea Ultra Titan 500 - White Special Edition 2x 45° angle with rubber seal 2x rubber seal with G1/4" internal thread 2x suitable hose clamps Note for first-time users: If you should have problems with your chiller please contact us before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product! Note for aquarium-use: The cooling performance is affected by the aquarium-lamp the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the ciller at least on power-lever higher that theoretically calculated This product has been reviewed for you (by): Overclockingstation Zockon bit-tech (engl.) How2 (Userreview): Hardwareluxx

The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The pricing of the new series is also pleasantly affordable. New revision: New cool design - white More robust materials for even longer lifespan Lowered noise emissions Suitable for continuous operation Noise emissions: The small chillers (like HC150) have a noise emission of 20dB(A) only and can be used near the computer / aquarium without disturbing. Bigger models (like HC500) should be additionally decoupled to reduce the noise level if necessary The models HC1000 und HC 2000 should be extra decoupled or maintained in a seperate room. This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem. Thanks to the low temperatures incredible overclocking potential is available! The lifespan of the components is extended by multiples. This system is also great for no-noise applications as the chiller can be located in another room. We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation. To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware. CPU: 80W (standard) to 150W (overclocked) GPU: 50W (small cards) to 250W (GTX 980) MB: 20 to 40W per component The added values of your system must not exceed the given cooling capability of the chiller. What aquarium size can be cooled with my water chiller? The manufacturer provides the following data: Model / aquarium size in liters: HC-130 / 50-100L HC-150 / 50-200L HC-250 / 100-300L HC-300 / 100-400L HC-500 / 200-800L HC-1000 / 300-1000L HC-2000 / 400-1500L We at Aquatuning wish to advise you that the manufacturer’s data was obtained under optimal circumstances. The temperature response of the aquarium may greatly vary because of insulation, heat from lights respectively sunlight. Hence we recommend using the larger model when reaching the upper limit of the aquarium size values. Notes regarding shipment: For shipping via parcel delivery (GLS) we have manufactured a specially padded carton. For handling and packaging we must charge 15€ incl. VAT. This charge is not charged when the Chiller is picked up or with pallet shipment if the chiller is shipped without the special packaging. Technical specifications: Power: 1/2 PS Power consumption: 375W Cooling capacity: 790W (suitable for extreme OC and cooling) Recommended coolant flow: 1200-3000 l/h Weight: 22kg Cooling agent: R134A Dimensions: 475 x 360 x 490mm (LxWxH) Connector outside diameter: 20-22mm Heat exchanger material: Titanium max. compressive load: 0,8bar Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps current demand: 2.4 A (50 Hz) current drain: 552 W Scope of Delivery: 1x Waterchiller Hailea Ultra Titan 1500 White Special Edition 2x 90° angle with rubber seal 2x straight with rubber seal 2x suitable hose clamps Note for first-time users: If you should have problems with your chiller please contact us before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product! Note for aquarium-use: The cooling performance is affected by the aquarium-lamp the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the ciller at least on power-lever higher that theoretically calculated This product has been reviewed for you (by): Overclockingstation Zockon bit-tech (engl.) How2 (Userreview): Hardwareluxx

The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The pricing of the new series is also pleasantly affordable. New revision New cool design More robust materials for even longer lifespan Lowered noise emissions Suitable for continuous operation Noise emissions The small chillers (like HC150) have a noise emission of 20dB(A) only and can be used near the computer / aquarium without disturbing. Bigger models (like HC500) should be additionally decoupled to reduce the noise level if necessary The models HC1000 und HC 2000 should be extra decoupled or maintained in a seperate room. This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem. Thanks to the low temperatures incredible overclocking potential is available! The lifespan of the components is extended by multiples. This system is also great for no-noise applications as the chiller can be located in another room. We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation. To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware. CPU: 80W (standard) to 150W (overclocked) GPU: 20W (small cards) to 150W (current models such as 8800) MB: 10 to 20W per component The added values of your system must not exceed the given cooling capability of the chiller. What aquarium size can be cooled with my water chiller? The manufacturer provides the following data Model / aquarium size in liters HC-130 / 50-100L HC-150 / 50-200L HC-250 / 100-300L HC-300 / 100-400L HC-500 / 200-800L HC-1000 / 300-1000L HC-2000 / 400-1500L We at Aquatuning wish to advise you that the manufacturer’s data was obtained under optimal circumstances. The temperature response of the aquarium may greatly vary because of insulation, heat from lights respectively sunlight. Hence we recommend using the larger model when reaching the upper limit of the aquarium size values. Notes regarding shipment For shipping via parcel delivery (GLS) we have manufactured a specially padded carton. For handling and packaging we must charge 15€ incl. VAT. This charge is not charged when the Chiller is picked up or with pallet shipment if the chiller is shipped without the special packaging. Notes regarding compatibility The chiller is shipped with fittings for 1" tubing (inner diameter approx. 19 to 20mm). It is shipped with one pair of straight and one pair of 90° angled fittings. To use standard fittings the following adaptor is recommended: Art. 37018 for G1/4". Technical specifications Power: 1/4 HP Mains voltage: 220-240V Cooling capacity: 390W (suitable for extreme OC and cooling) Recommended coolant flow: 500-2500 l/h Weight: 18,6kg Cooling agent: R134A Dimensions: 448x330x440mm (LxWxH) Heat exchanger material: Titanium max. compressive load: 0,8bar Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps current demand: 1.8 A (50 Hz) current drain: 414 W Note for first-time users If you should have problems with your chiller please contact us before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product! Note for aquarium-use The cooling performance is affected by the aquarium-lamp the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the ciller at least on power-lever higher that theoretically calculated This product has been reviewed for you (by) bit-tech (engl.) How2 (Userreview) Hardwareluxx

The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The pricing of the new series is also pleasantly affordable. New revision New cool design More robust materials for even longer lifespan Lowered noise emissions Suitable for continuous operation Noise emissions The small chillers (like HC150) have a noise emission of 20dB(A) only and can be used near the computer / aquarium without disturbing. Bigger models (like HC500) should be additionally decoupled to reduce the noise level if necessary The models HC1000 und HC 2000 should be extra decoupled or maintained in a seperate room. This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem. Thanks to the low temperatures incredible overclocking potential is available! The lifespan of the components is extended by multiples. This system is also great for no-noise applications as the chiller can be located in another room. We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation. To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware. CPU: 80W (standard) to 150W (overclocked) GPU: 20W (small cards) to 150W (current models such as 8800) MB: 10 to 20W per component The added values of your system must not exceed the given cooling capability of the chiller. What aquarium size can be cooled with my water chiller? The manufacturer provides the following data Model / aquarium size in liters HC-130 / 50-100L HC-150 / 50-200L HC-250 / 100-300L HC-300 / 100-400L HC-500 / 200-800L HC-1000 / 300-1000L HC-2000 / 400-1500L We at Aquatuning wish to advise you that the manufacturer’s data was obtained under optimal circumstances. The temperature response of the aquarium may greatly vary because of insulation, heat from lights respectively sunlight. Hence we recommend using the larger model when reaching the upper limit of the aquarium size values. Notes regarding shipment For shipping via parcel delivery (GLS) we have manufactured a specially padded carton. For handling and packaging we must charge 15€ incl. VAT. This charge is not charged when the Chiller is picked up or with pallet shipment if the chiller is shipped without the special packaging. Notes regarding compatibility The chiller is shipped with fittings for 1" tubing (inner diameter approx. 19 to 20mm). It is shipped with one pair of straight and one pair of 90° angled fittings. To use standard fittings the following adaptor is recommended: Art. 37018 for G1/4". Technical specifications Power: 1/1 PS Mains voltage: 220-240V Cooling capacity: 165W (suitable for extreme OC and cooling) Recommended coolant flow: 250-1200 l/h Weight: 15kg Cooling agent: R 134 A Dimensions: 420 x 248 x 365mm (LxWxH) Heat exchanger material: Titanium max. compressive load: 0,8bar Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps current demand: 1.1 A (50 Hz) current drain: 253 W Note for first-time users If you should have problems with your chiller please contact us before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product! Note for aquarium-use The cooling performance is affected by the aquarium-lamp the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the ciller at least on power-lever higher that theoretically calculated This product has been reviewed for you (by) bit-tech (engl.) How2 (Userreview) Hardwareluxx

Water blocks from the HEATKILLER® MB-X series are focused on performance. They are designed for the specific mainboard and therefore, they are not modular like products of our HEATKILLER® SW-X series. On the plus side, they offer superior cooling performance for the demanding customer while producing very little restriction (High Flow). The water block enhances the mechanical stability of the mainboard while granting superior overclocking potential. Another key feature of the HEATKILLER® MB-X series are isolating spacers. They isolate the water block from the mainboard electrically, while granting easy mounting. Tilting or wobbling of the water block are also ruled out by them. Only high grade materials are used for the HEATKILLER® MB-X series. The cold plate is made from 99,9% pure electrolytic copper. The top is made from high quality industrial plastic. You can choose between black ACETAL (POM) or transparent ACRYL (original PLEXIGLAS). To illuminate the water block, there also is a 3mm drill hole for LEDs. Integration in the water loop is provided via two G1/4 threads. Pre cut thermal pads are within the scope of deliver, as is the mounting material. No additional thermal compound is needed. Technical Data: Material: electrolytic copper, PLEXIGLAS, stainless steel Dimensions: (L x W x H): 126 x 116 x 23,5 mm Weight: ca. 150g Pressure tested: 2 bar Sealing: NBR70 Threads: G1/4 inch (DIN ISO 228-1) Included: 1x HEATKILLER® MB-X KIT ASUS MAXIMUS VIII RANGER/HERO/GENE - ACRYL 1x Mounting kit 1x thermal pads 1x Manual

The HEATKILLER® IV VGA series is the result of 15 years of experience in design and manufacture of high-performance water cooling equipment. Only the best of the previous generation was merged with the HEATKILLER® IV VGA Series to provide an even more powerful water block. The GPU cooling structure of the successful HEATKILLER® GPU-X³ series was taken over and improved by the central flow of the well-known HEATKILLER® GPU-X² series. In addition, some improvements have been made. An extremely fine microstructure sits right above the GPU and assisted by a low residual base thickness bringing even better cooling results. The flow was also vastly improved thanks to all channels are constructed as wide as possible. All relevant secondary components, such as memory or voltage regulation module are also cooled with water. Insulating spacers establish the contact with the board, therefore the installation is very simple. Only high-quality materials such as high purity electrolytic copper or the original PLEXIGLAS® GS of EVONIK is used in HEATKILLER® IV VGA series .The production is carried out entirely on a modern CNC machine placed at the Watercool company site in northern Germany. Pre-cut thermal pads for RAM (VRAM) and voltage regulation module (VRM) are already included, along with the installation materials, and an installation instruction. In order to connect several HEATKILLER® IV VGA water block together, the GPU-X Dual-Link and GPU-X Multi-Link are sold separately. A backplate is also available. This water water block is compatible with any NVIDIA TITAN X Pascal (reference design). For more information on compatibility, please refer to the compatibility list for HEATKILLER® VGA coolers . Technical specifications Material: nickel plated electrolytic copper, stainless steel, POM Dimensions: (LxWxH) 266 x 118 x 18,5 mm Weight: 800g Connector: 4x G ¼ Inch (DIN ISO 228-1) Pressure tested: 2 bar Compatible with: NVIDIA TITAN X Pascal (reference design) Scope of delivery 1x HEATKILLER® IV for TITAN X (Pascal) - ACETAL Ni 1x Mounting material / manual

The HEATKILLER® IV VGA series is the result of 15 years of experience in design and manufacture of high-performance water cooling equipment. Only the best of the previous generation was merged with the HEATKILLER® IV VGA Series to provide an even more powerful water block. The GPU cooling structure of the successful HEATKILLER® GPU-X³ series was taken over and improved by the central flow of the well-known HEATKILLER® GPU-X² series. In addition, some improvements have been made. An extremely fine microstructure sits right above the GPU and assisted by a low residual base thickness bringing even better cooling results. The flow was also vastly improved thanks to all channels are constructed as wide as possible. All relevant secondary components, such as memory or voltage regulation module are also cooled with water. Insulating spacers establish the contact with the board, therefore the installation is very simple. Only high-quality materials such as high purity electrolytic copper or the original PLEXIGLAS® GS of EVONIK is used in HEATKILLER® IV VGA series .The production is carried out entirely on a modern CNC machine placed at the Watercool company site in northern Germany. Pre-cut thermal pads for RAM (VRAM) and voltage regulation module (VRM) are already included, along with the installation materials, and an installation instruction. In order to connect several HEATKILLER® IV VGA water block together, the GPU-X Dual-Link and GPU-X Multi-Link are sold separately. A backplate is also available. This water water block is compatible with any NVIDIA TITAN X Pascal (reference design). For more information on compatibility, please refer to the compatibility list for HEATKILLER® VGA coolers . Technical specifications Material: electrolytic copper, stainless steel, POM, PLEXIGLAS® GS, anodized aluminum Dimensions: (LxWxH) 266 x 118 x 18,5 mm Weight: 800g Connector: 4x G ¼ Inch (DIN ISO 228-1) Pressure tested: 2 bar Compatible with: NVIDIA TITAN X Pascal (reference design) Scope of delivery 1x HEATKILLER® IV for TITAN X (Pascal) - ACRYL Ni-Bl 1x Mounting material / manual

The HEATKILLER® IV VGA series is the result of 15 years of experience in design and manufacture of high-performance water cooling equipment. Only the best of the previous generation was merged with the HEATKILLER® IV VGA Series to provide an even more powerful water block. The GPU cooling structure of the successful HEATKILLER® GPU-X³ series was taken over and improved by the central flow of the well-known HEATKILLER® GPU-X² series. In addition, some improvements have been made. An extremely fine microstructure sits right above the GPU and assisted by a low residual base thickness bringing even better cooling results. The flow was also vastly improved thanks to all channels are constructed as wide as possible. All relevant secondary components, such as memory or voltage regulation module are also cooled with water. Insulating spacers establish the contact with the board, therefore the installation is very simple. Only high-quality materials such as high purity electrolytic copper or the original PLEXIGLAS® GS of EVONIK is used in HEATKILLER® IV VGA series .The production is carried out entirely on a modern CNC machine placed at the Watercool company site in northern Germany. Pre-cut thermal pads for RAM (VRAM) and voltage regulation module (VRM) are already included, along with the installation materials, and an installation instruction. In order to connect several HEATKILLER® IV VGA water block together, the GPU-X Dual-Link and GPU-X Multi-Link are sold separately. A backplate is also available. Please refer to our HEATKILLER® VGA compatibility chart for further information. Technical specifications Material: electrolytic copper, stainless steel, POM, PLEXIGLAS® GS Connector: 4x G ¼ Inch (DIN ISO 228-1) Pressure tested: 2 bar Compatible with EVGA GTX 1070 FTW Gaming ACX 3.0 EVGA GTX 1070 FTW DT Gaming ACX 3.0 EVGA GTX 1070 FTW2 Gaming iCX EVGA GTX 1070 FTW2 DT Gaming iCX EVGA GTX 1080 FTW Gaming ACX 3.0 EVGA GTX 1080 FTW DT Gaming ACX 3.0 EVGA GTX 1080 FTW2 Gaming iCX EVGA GTX 1080 FTW2 DT Gaming iCX Scope of delivery 1x HEATKILLER® IV for GTX 1080 and 1070 FTW/FTW2 - ACRYL 1x Mounting material / manual

The HEATKILLER® IV VGA series is the result of 15 years of experience in design and manufacture of high-performance water cooling equipment. Only the best of the previous generation was merged with the HEATKILLER® IV VGA Series to provide an even more powerful water block. The GPU cooling structure of the successful HEATKILLER® GPU-X³ series was taken over and improved by the central flow of the well-known HEATKILLER® GPU-X² series. In addition, some improvements have been made. An extremely fine microstructure sits right above the GPU and assisted by a low residual base thickness bringing even better cooling results. The flow was also vastly improved thanks to all channels are constructed as wide as possible. All relevant secondary components, such as memory or voltage regulation module are also cooled with water. Insulating spacers establish the contact with the board, therefore the installation is very simple. Only high-quality materials such as high purity electrolytic copper or the original PLEXIGLAS® GS of EVONIK is used in HEATKILLER® IV VGA series.The production is carried out entirely on a modern CNC machine placed at the Watercool company site in northern Germany. Pre-cut thermal pads for RAM (VRAM) and voltage regulation module (VRM) are already included, along with the installation materials, and an installation instruction. In order to connect several HEATKILLER® IV VGA water block together, the GPU-X Dual-Link and GPU-X Multi-Link are sold separately. A backplate is also available. Please refer to our HEATKILLER® VGA compatibility chart for further information. Technical specifications Material: nickel plated electrolytic copper, stainless steel, POM, PLEXIGLAS® GS Connector: 4x G ¼ Inch (DIN ISO 228-1) Pressure tested: 2 bar Compatible with EVGA GTX 1070 FTW Gaming ACX 3.0 EVGA GTX 1070 FTW DT Gaming ACX 3.0 EVGA GTX 1070 FTW2 Gaming iCX EVGA GTX 1070 FTW2 DT Gaming iCX EVGA GTX 1080 FTW Gaming ACX 3.0 EVGA GTX 1080 FTW DT Gaming ACX 3.0 EVGA GTX 1080 FTW2 Gaming iCX EVGA GTX 1080 FTW2 DT Gaming iCX Scope of delivery 1x HEATKILLER® IV for GTX 1080 and 1070 FTW/FTW2 - ACRYL 1x Mounting material / manual

The backplate cools relevant components on the PCB’s backside. These are GPU, memory blocks (VRAM) or voltage regulation (VRM). Precut thermal pads are included in the scope of delivery. Recesses in the backplate offer compatibility to mainboards with extremely wide IO ports. The stepping near the RAM slots offers ample distance to the memory modules. Isolating spacers on the back side of the backplate ensure easy installation. The enclosed mounting material is optimized for usage with HEATKILLER® IV water blocks. The backplate can be used with water blocks of other manufacturers. Specialized mounting material might be needed though. This is not part of the delivery scope. Technical data Material: Anodized aluminum Weight: 250g Compatible to EVGA GTX 1070 FTW Gaming ACX 3.0 EVGA GTX 1070 FTW DT Gaming ACX 3.0 EVGA GTX 1070 FTW2 Gaming iCX EVGA GTX 1070 FTW2 DT Gaming iCX EVGA GTX 1080 FTW Gaming ACX 3.0 EVGA GTX 1080 FTW DT Gaming ACX 3.0 EVGA GTX 1080 FTW2 Gaming iCX EVGA GTX 1080 FTW2 DT Gaming iCX Scope of delivery 1x HEATKILLER® IV eBC - Backplate for GTX 1080 and 1070 FTW/FTW2 1x Mounting material

The HEATKILLER® IV VGA series is the climax of 15 years of experience in designing and manufacturing high-performance water cooling equipment. Only the best features of the previous generations were merged together to provide an even more powerful water block. We continued the GPU cooling structure of the successful HEATKILLER® GPU-X³ series and enhanced it with the central flow design, already known from the HEATKILLER® GPU-X² series. Then, we did some improvements: the combination of an extremely fine microstructure right above the GPU and a reduced residual base thickness deliver even better cooling performance. We also improved the overall flow rates by constructing all channels as wide as possible. All relevant secondary components, such as memory or voltage regulation modules are also directly cooled by the fluent. Another highlight of the HEATKILLER® IV for TITAN X and GTX 1080Ti is hidden under the black POM side bracket: you can find a precision milled groove in the acrylic glass here. This groove is the perfect preparation to illuminate your water block. You can simply install one of the LED strips here and directly connect it to the onboard LED connector (Strips sold separately)! Thanks to preinstalled insulating spacers, the installation of the block onto the graphics card is really simple. The HEATKILLER® IV VGA series is manufactured from high-quality materials only: we only use highly purified electrolytic copper and the original PLEXIGLAS® GS from EVONIK for our products. All our products are completely manufactured on our own modern machinery park in our own workshop in Germany. Pre-cut thermal pads for RAM (VRAM) and voltage regulation module (VRM) are already included, along with the installation materials, and an installation instruction. In order to connect several HEATKILLER® IV VGA water blocks in a Crossfire/SLI setup, the GPU-X Dual-Link and GPU-X Multi-Link accessories are sold separately. A backplate is also available. For information on compatibility, please refer to the compatibility list for HEATKILLER® VGA coolers. Technical specifications Material: electrolytic copper, stainless steel, POM, PLEXIGLAS® GS Dimensions: (LxWxH) 266 x 118 x 18,5 mm Weight: 800g Connector: 4x G ¼ Inch (DIN ISO 228-1) Pressure tested: 2 bar Compatible with: NVIDIA GTX 1080Ti Founders Edition (reference design) Scope of delivery 1x HEATKILLER® IV for GTX 1080Ti - ACRYL Ni 1x Mounting material / manual

The HEATKILLER® IV VGA series is the climax of 15 years of experience in designing and manufacturing high-performance water cooling equipment. Only the best features of the previous generations were merged together to provide an even more powerful water block. We continued the GPU cooling structure of the successful HEATKILLER® GPU-X³ series and enhanced it with the central flow design, already known from the HEATKILLER® GPU-X² series. Then, we did some improvements: the combination of an extremely fine microstructure right above the GPU and a reduced residual base thickness deliver even better cooling performance. We also improved the overall flow rates by constructing all channels as wide as possible. All relevant secondary components, such as memory or voltage regulation modules are also directly cooled by the fluent. Another highlight of the HEATKILLER® IV VGA series is hidden under the black POM side bracket: you can find a precision milled groove in the acrylic glass here. This groove is the perfect preparation to illuminate your water block. You can simply install one of the LED strips here and directly connect it to the onboard LED connector (Strips sold separately)! Thanks to preinstalled insulating spacers, the installation of the block onto the graphics card is really simple. The HEATKILLER® IV VGA series is manufactured from high-quality materials only: we only use highly purified electrolytic copper and the original PLEXIGLAS® GS from EVONIK for our products. All our products are completely manufactured on our own modern machinery park in our own workshop in Germany. Pre-cut thermal pads for RAM (VRAM) and voltage regulation module (VRM) are already included, along with the installation materials, and an installation instruction. In order to connect several HEATKILLER® IV VGA water blocks in a Crossfire/SLI setup, the GPU-X Dual-Link and GPU-X Multi-Link accessories are sold separately. A backplate is also available. For information on compatibility, please refer to the compatibility list for HEATKILLER® VGA water blocks. Technical specifications Material: nickel plated electrolytic copper, anodized aluminum, POM, PLEXIGLAS® GS Dimensions: (LxWxH) 266 x 118 x 18,5 mm Weight: 800g Connector: 4x G ¼ Inch (DIN ISO 228-1) Pressure tested: 2 bar Compatible with: NVIDIA GTX 1080Ti Founders Edition (reference design) Scope of delivery 1x HEATKILLER® IV for GTX 1080Ti - ACRYL Ni 1x Mounting material / manual

The HEATKILLER® IV VGA series is the climax of 15 years of experience in designing and manufacturing high-performance water cooling equipment. Only the best features of the previous generations were merged together to create an even more powerful water block. We continued the GPU cooling structure of the successful HEATKILLER® GPU-X³ series and enhanced it with the central flow design, already known from the HEATKILLER® GPU-X² series. Then, we did some improvements: the combination of an extremely fine microstructure right above the GPU and a reduced residual base thickness deliver even better cooling performance. We also improved the overall flow rates by constructing all channels as wide as possible. Considering secondary components, we didn't settle to only cool the VRAM and the first row of MOSFETs. The biggest coldplate we ever made for a Single GPU card with 800 grams of pure electrolytic copper covers the entire PCB. Not only does it provide an optic highlight by finishing all edges around the block with copper. It also gives us the ability to really cool all components for which Nvidia requires cooling in this generation: this includes not only all the MOSFETs and coils of the VRMs, but also several additional small components of the power circuitry. This guarantees a smooth and stable power delivery under load scenarios, which can provide better overclocking results and stability. With the preinstalled RGB LED strip, you can perfectly integrate your water block into your PC's lighting concept. The strip comes with a standardized 4Pin RGB connector that is powered directly from a mainboard's RGB LED header. This strip is compatible with most mainboard headers (including RGB LED by ASRock, AURA by ASUS, AORUS RGB FUSION by GIGABYTE and MYSTIC LIGHT by MSI), but also with many third-party RGB controllers. Thanks to preinstalled insulating spacers, the installation of the block onto the graphics card is really simple. The HEATKILLER® IV VGA series is manufactured from high-quality materials only: we only use highly purified electrolytic copper and the original PLEXIGLAS® GS from EVONIK for our products. All our products are completely manufactured on our own modern machinery park in our own workshop in Germany. Pre-cut thermal pads for RAM (VRAM) and voltage regulation module (VRM) are already included, along with the installation materials, and an installation instruction. In order to connect several HEATKILLER® IV VGA water blocks in a Crossfire/SLI setup, the GPU-X Dual-Link and GPU-X Multi-Link accessories are sold separately. A backplate is also available. For information on compatibility, please refer to the compatibility list for HEATKILLER® VGA water blocks. Technical specifications Material: chemically nickel plated electrolytic copper, stainless steel, POM, PLEXIGLAS® GS Dimensions: (LxWxH): 262,5 x 117,25 x 18,5 mm (including port terminal) Weight: 1250g Connector: 4x G ¼ Inch (DIN ISO 228-1) Pressure tested: 2 bar Compatible with: NVIDIA Geforce RTX 2080 (reference design) Scope of delivery 1x HEATKILLER® IV for RTX 2080 - ACRYL Ni RGB 1x HEATKILLER® LED strip - RGB1x Mounting material 1x Manual

The HEATKILLER® IV VGA series is the climax of 15 years of experience in designing and manufacturing high-performance water cooling equipment. Only the best features of the previous generations were merged together to create an even more powerful water block. We continued the GPU cooling structure of the successful HEATKILLER® GPU-X³ series and enhanced it with the central flow design, already known from the HEATKILLER® GPU-X² series. Then, we did some improvements: the combination of an extremely fine microstructure right above the GPU and a reduced residual base thickness deliver even better cooling performance. We also improved the overall flow rates by constructing all channels as wide as possible. Considering secondary components, we didn't settle to only cool the VRAM and the first row of MOSFETs. The biggest coldplate we ever made for a Single GPU card with 800 grams of pure electrolytic copper covers the entire PCB. Not only does it provide an optic highlight by finishing all edges around the block with copper. It also gives us the ability to really cool all components for which Nvidia requires cooling in this generation: this includes not only all the MOSFETs and coils of the VRMs, but also several additional small components of the power circuitry. This guarantees a smooth and stable power delivery under load scenarios, which can provide better overclocking results and stability. Thanks to preinstalled insulating spacers, the installation of the block onto the graphics card is really simple. The HEATKILLER® IV VGA series is manufactured from high-quality materials only: we only use highly purified electrolytic copper and the original PLEXIGLAS® GS from EVONIK for our products. All our products are completely manufactured on our own modern machinery park in our own workshop in Germany. Pre-cut thermal pads for RAM (VRAM) and voltage regulation module (VRM) are already included, along with the installation materials, and an installation instruction. In order to connect several HEATKILLER® IV VGA water blocks in a Crossfire/SLI setup, the GPU-X Dual-Link and GPU-X Multi-Link accessories are sold separately. A backplate is also available. For information on compatibility, please refer to the compatibility list for HEATKILLER® VGA water blocks. Technical specifications Material: chemically nickel plated electrolytic copper, stainless steel, POM Dimensions: (LxWxH): 262,5 x 117,25 x 18,5 mm (including port terminal) Weight: 1250g Connector: 4x G ¼ Inch (DIN ISO 228-1) Pressure tested: 2 bar Compatible with: NVIDIA Geforce RTX 2080 (reference design) Scope of delivery 1x HEATKILLER® IV for RTX 2080 - ACETAL Ni 1x Mounting material 1x Manual

Normal 0 21 false false false DE X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Normale Tabelle"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:"; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:8.0pt; mso-para-margin-left:0cm; line-height:107%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri",sans-serif; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} The Pacific G1/4 Pressure Equalizer Stop Plug fitting is made to release excess air or pressure in your pump. Finished in chrome/black-plated copper, the G1/4 pressure equalizer plug is designed to be installed on the top of a reservoir, and utilizes leak-free design with an already preinstalled O-ring. Enjoy the ultimate in custom PC water cooling configurations with high quality components from Thermaltake.

With the new NexXxoS GPX coolers Alphacool is again a step ahead! Optimum performance and quality in a new cooling design for a great price! A new sophisticated injection system means the GPU is actively cooled. All other chips are sufficiently cooled by the passive cooler which is also in contact with the watercooling block for extra efficiency. The patented technology “Philips structure” from the Alpha NexXxoS XP in 2004, was further developed improving the base plate. The Fins and channel structure has been further refined. The fins are now 0.5 x 0.5 mm and 2.5 mm high. This enables a very large and rapid heat transfer from the copper to the coolant. SLI mode: The inlet and outlet are positioned of easy use in SLI mode. Up to four graphics cards can also be connected with the Alphacool GPX SLI connector. Back plate: The GPX range always Includes a back plate which uses small passive fins to cool rear of the graphics card. Cooling fins: The passive front plate cooling uses 18mm deep cooling fins that cover the rest of the graphics card completely. Graphics card not included Compatible: Scope of delivery: 1x VGA cooler 1x Back plate Thermal pads Thermal Compound mounting material configurator for VGA cooler. The installation manual can be downloaded here compatibility list Nvidia

Alphacool is making great strides with the new NexXxoS GPX coolers! The new cooling concept offers optimal performance and quality at a reasonable price! Function The GPU is actively cooled through the ingenious new injection technology. All the other chips are sufficiently cooled through the passive cooler in which the GPU water cooler is enclosed. Cross Slot Structure The cross slot technology in the base plate, patented in 2004 and used in the Alphacool NexXxoS XP, has been developed further. The fins and channel structure have been refined. The remaining panes are 0.5 x 0.5mm in size and 2.5mm tall. This enables a very large and fast rate of heat transfer from the copper to the coolant. SLI Operation Through the outside-facing inlet and outlet, this cooler can be used in SLI configurations with little difficulty. This way, up to four graphics cards can be connected with the Alphacool GPX SLI Connector. Backplate Every cooler now includes a backplate which uses little passive cooling fins to cool the graphics card again, as well as giving the graphics card a finished appearance and protecting it at the same time. Cooling Fins Passive cooling happens through perfectly balanced, barely 18mm deep cooling fins, which completely cover the remaining parts of the graphics card. Light air circulation in the case means this cooler is in no way inferior to conventional coolers. Graphics card not included Compatibility Zotac GeForce GTX 1080 Ti AMP Extreme 11GB GDDR5X (ZT-P10810C-10P) Zotac GeForce GTX 1080 Ti AMP 11GB GDDR5X (ZT-P10810D-10P) Zotac GeForce GTX 1080 Ti Arctic Storm 11GB GDDR5X (ZT-P10810E-30P) Scope of Delivery 1x Graphics card cooler 1x Backplate Thermal pads Thermal paste Assembly materials Configurator for VGA cooler Installation manual available for download here Compatibility list Nvidia

The world-renowned manufacturer, Alphacool, offers the Eisblock GPX, a very noble and high-quality full cover water cooler for your graphics card. The Eisblock GPX is available in three versions; Two eye-catching versions, one with a plexiglass window, one with a full plexi cover and a simple but elegant version made of acetal. Both versions with Plexi have RGB LED lightning. All coolers are based on an identical copper heat sink, which is completely nickel-plated. The surface area where the water flows is very large, so that all components that give off heat are actively cooled with water which increases performance. The 35 fins of the cooler are only 0.6 mm thick and cover even large GPUs completely. The large cooling surface is also ideal for graphics cards with HBM memory. The optical highlight of the Plexi variant, besides the very large window, of course also the complete and integrated RGB lighting. This is compatible with ASUS Aurora Sync, Biostar VIVID LED DJ, Gigabyte RGB Fusion or MSI Mystic. But pay attention to the connection on your mainboard. You may need a Male-to-Female adapter for some motherboards. With the Alphacool Eisblock GPX full cover water cooler for your graphics card you get a high-quality cooler with excellent cooling performance. You have the choice between a simple but noble black acetal version or a striking, wonderfully illuminated and chic plexi version with a large viewing window. Compatibility ASUS Dual GeForce RTX 2080 Ti Advanced, DUAL-RTX2080TI-A11G, 11GB GDDR6 (90YV0C42-M0NM00) ASUS Dual GeForce RTX 2080 Ti OC, 11GB GDDR6 (90YV0C41-M0NM00) EVGA GeForce RTX 2080 Ti XC (11G-P4-2382-KR) EVGA GeForce RTX 2080 Ti XC ULTRA GAMING (11G-P4-2383-KR) GALAX GeForce RTX 2080Ti 11GB GDDR6 GIGABYTE GeForce RTX 2080 Ti WINDFORCE OC 11G (GV-N208TWF3OC-11GC) MSI GeForce RTX 2080 Ti Duke 11G OC, 11GB GDDR6 (V371-011R) MSI GeForce RTX 2080 Ti Duke 11G, 11GB GDDR6 Palit GeForce RTX 2080 Ti GamingPro OC, 11GB GDDR6 (NE6208TS20LC-150A) Palit GeForce RTX 2080 Ti GamingPro, 11GB GDDR6 (NE6208T020LC-150A) Gainward GeForce RTX 2080 Ti Phoenix GS, 11GB GDDR6 (426018336-4122) GIGABYTE GeForce RTX 2080 Ti GAMING OC 11G (GV-N208TGAMING OC-11GC) KFA² GeForce RTX 2080 Ti OC, 11GB GDDR6 ZOTAC GAMING GeForce RTX 2080 Ti Triple Fan (ZT-T20810F-10P) Inno3D GeForce RTX 2080 Ti Gaming OC X3, 11GB GDDR6 (N208T3-11D6X-1150VA24) Inno3D GeForce RTX 2080 Ti Gaming OC, 11GB GDDR6 (N208T3-11D6X-1150VA24) Inno3D GeForce RTX 2080 Ti Twin X2, 11GB GDDR6 (N208T2-11D6-1150633) Scope of Delivery Alphacool Eisblock GPX-N Acetal Nvidia Geforce GTX 2080Ti M01 Mounting material Thermal pads Thermal paste SLI compatible module 2x screw plug

The new generation of Alphacool GPU coolers has arrived! The Alphacool Eisblock Aurora Plexi GPX combines outstanding performance with breath-taking aesthetics. What has changed? This is where Alphacool's 16 years of experience pays off! The already powerful Eisblocks have been further optimized: A new look, thinner thermal pads (1mm), a thinner copper block (5.5mm) and a significantly improved flow rate are just some of the important changes. And the design? This time Alphacool puts the lighting more in the foreground! Along the entire cooling block there are addressable digital RGB LEDs, so that no corner of your case remains in the dark. The more angular design compared to its predecessors further enhances this effect. What else? There have been no compromises with the materials and the cooling block is still 100% copper. Now however, the nickel-plating of the cooler has been further optimised. This increases acid resistance and almost eliminates the risk of chipping the nickel-plating. A further highlight is the use of the patented Alphacool stop plugs: These sit flush with the surface of the cooler and form a flat surface when screwed in. No more annoying protruding stop fittings! Finally, the branding of the Eisblock has been adapted. It is now much more discreet and fits perfectly into the already elegant appearance. With this product Alphacool has once again proven its technical know-how! Check it out for yourself and let your system shine in a new light! Technical Details: W x T x H: 118,8 x 263,7 x 25,3 mm Net weight: 787 g Max working temperature: 60 °C Material cooler: nickel plated copper Material top: plexiglass Thikness of fins: 0,6 mm Threads: 4 x G1/4“ Power supply Digital RGB: 3-Pin 5V (0,5A) Pressure tested: 1,5 Bar Compatible to: Nvidia Geforce RTX 2080 Ti Founders Edition Nvidia Geforce RTX 2080 Founders Edition Graphics card configurator: click here List of compatibility: Nvidia cooler Download manual PDF: Alphacool Eisblock Aurora Plexi GPX-N Nvidia Geforce RTX 2080/2080Ti FE Download data sheet PDF: Alphacool Eisblock Aurora Plexi GPX-N Nvidia Geforce RTX 2080/2080Ti FE

Individual, yet suitable for everyone. Minimalistic, yet full of elegance. High Performance and made for your next project: The Alphacool Eisblock GPX! Style Meets Performance Alphacool has already created a name for itself with its Eisblock GPX series among modders, gamers and performance enthusiasts. Alphacool offers several models to fit many NVIDIA® graphics card layouts, so there's something for everyone. For the first time the Eisblock GPX Plexi Light and Plexi is equipped with ARGB (Addressable RGB) lighting. Also, for all fans of simplicity Alphacool also offers the classic acetal version, which lets your GPU stay sleek and beautiful with a minimalistic noble design. Only the Best for You The Alphacool Eisblock series is based on completely nickel-plated copper bottoms, which are made from a single block of copper. The flow is optimised by the generous water channels in the best possible way so that they have been finely tuned to dissipate the heat. Thanks to the full cover design, all coolers have the performance to cool your GPU during all gaming and heavy-duty activities in the best possible way. This gives your hardware a longer life and protects it optimally. The included backplates puts the finishing touches to the Eisblock and perfectly crowns it. Individually Tuned to Your System Thanks to new ARGB technology, you can customise the Eisblock Plexi and Plexi Light more than ever before. These 5V addressable RGB LED´s can be connected to the Alphacool EIscontrol Controller ( 1015857 , sold separately). Whether you like it colourful like a mystical unicorn or if you just want a single colour. The Eisblock with ARGB lighting makes it possible. With the Eisblock Plexi variant you can see the fluid running through your water block and with the Alphacool Eiswater your gaming system is the eyecatcher at every LAN party. No GPU fan, No GPU Sound In addition to the increased performance, you have another advantage of water cooling in all situations: no annoying fans on your GPU and no excessive temperatures that make your graphics card howl. The Alphacool Eisblock Series completely replaces your GPU air cooler and helps you towards that silent system you've longed for. Compatible to ASUS Dual GeForce RTX 2080 Ti Advanced EVGA GeForce RTX 2080 Ti EVGA GeForce RTX 2080 Ti XC2 Ultra Gaming GIGABYTE GeForce RTX 2080 Ti GAMING OC 11G MSI GeForce RTX 2080 Ti Duke 11G OC, 11GB GDDR6 Nvidia Geforce RTX 2080Ti Founders Edition Zotac Gaming GeForce RTX 2080 Ti Blower, 11GB GDDR6 INNO3D GeForce RTX 2080 Gaming OC, 8GB GDDR6 Nvidia Geforce RTX 2080 Founders Edition ASUS Dual GeForce RTX 2070 OC, DUAL-RTX2070-O8G, 8GB GDDR6, (90YV0C82-M0NA00) EVGA GeForce RTX 2070 XC Ultra Gaming, 8GB GDDR6, (08G-P4-2173-KR) Gigabyte GeForce RTX 2070 Gaming OC 8G, 8GB GDDR6,(GV-N2070GAMING OC-8GC) MSI GeForce RTX 2070 Aero 8G, 8GB GDDR6, (V373-002R) For complete compatibility, see this PDF ATTENTION: The cooler is only compatible with connections with a maximum thread length of 5 mm. Technical Details Material Bottom: Nickel-plated Copper Material Cover: Acrylic (Plexi) Dimensions (LxWxH): 263,70 x 120,01 x 23,50mm Thread: 1/4" Connector: 3Pin ARGB (5V) (0,5A) Scope of Delivery Alphacool Eisblock GPX-N 2080/2080Ti M02 Backplate SLI Terminal Thermal Compound and Pads ARGB Cable Mounting Material