Otsing: thermal pad (arhiveeritud tooted)

The EK-Quantum Vector RTX RE Ti D-RGB high-performance water block is an evolution of the original EK-Vector water block where the standard 12V RGB is changed with 5V D-RGB which has separately addressable diodes. This water block is specially designed for multiple reference NVIDIA® GeForce® RTX 2080 Ti graphics cards. This product is also compatible with the reference NVIDIA GeForce RTX SUPER cards. For detailed compatibility check the EK Configurator. The cooling engine is tweaked for even more performance with an optimized flow pattern. It also offers extended compatibility fitting more reference design based graphics cards. This water block is compatible with all reference design GeForce RTX 2080 Ti-based graphics cards, but as always, we recommend that you refer to the EK® Cooling Configurator for a precise compatibility match. The water block directly cools the GPU, VRAM and the VRM (voltage regulation module) as cooling liquid is channeled directly over these critical areas. These newly developed water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK® Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance of these water blocks. The EK® Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of glass-like Acrylic. Sealing is ensured by high-quality EPDM O-Rings. The brass standoffs are already pre-installed and allow for a safe and easy installation procedure. The front aesthetic corner piece is lit up with an addressable LED strip. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB(addressable) header. EK® recommends the purchase of a retention backplate which improves the aesthetics of your graphics cards, but also provides additional passive cooling to the GPU core and circuit board VRM section. G1/4" threaded fittings can be used on both sides of the terminal and for multiple GPU connectivity, please refer to our offer of EK-Scalar GPU Terminals. The EK-Quantum Vector RTX RE Ti GPU water block terminal cover is not compatible with FC Terminal X and FC Terminal (Legacy) multi GPU connectivity bridges. Enclosed: - EK-Quantum Vector RTX RE Ti D-RGB series high-performance water block - Mounting mechanism with screw-in brass standoffs - Necessary mounting screws, nuts, and washers - 2x Nickel plated brass plug G1/4” - 6mm Allen key - Thermal pads - Thermal grease EK-TIM Ectotherm (1g) Made in Slovenia - Europe!

Vichy's first bi-phase waterproof eye makeup remover is kind on sensitive skin, whilst effectively eliminating all traces of makeup. This highly effective non greasy, oil-based cleanser leaves the skin feeling comfortable, clear and clean. Suitable for sensitive eyes.Removes resistant waterproof eye make-upThe eye contour is left feeling comfortable, clear and cleanLeaves lashes feeling protectedEnriched with soothing Arginine and TaurineIdeal for sensitive eyesEnriched with Vichy Mineralizing Thermal Water. Makeup removal is easy and skin is left with no discomfort. Ideal for women with sensitive skin and eyes that want to protect their lashes.LEARN HOW TO USEApply Pureté Thermale Waterproof Eye Makeup Remover to cotton pad, and remove all traces of makeup in soft sweeping actionsCleanse and tone the skinApply soothing moisturiser to face, neck and chest

Tootekirjeldus inglise keeles:Technical three-season synthetic sleeping bag that provides a lot of heat in a lightweight, supple format. The Supreme Microloft padding keeps you warm even when it becomes damp. The head section is very warm and has a synthetics-padded thermal collar that together with the drawcord adjustment traps the heat inside the bag. Full-length, two-way zipper means you can open the bag at the feet, and a padded flap along the opening blocks cold drafts. Large foot box provides plenty of space for your feet. Small inner pocket for things you want to have close at hand. Eyelets at the feet for hang-drying. Pack bag included. Comfort temperature (men) of -4℃ (women +2°C). Fits individuals up to 195 centimetres tall.

Tootekirjeldus inglise keeles:Technical three-season synthetic sleeping bag that provides a lot of heat in a lightweight, supple format. The Supreme Microloft padding keeps you warm even when it becomes damp. The head section is very warm and has a synthetics-padded thermal collar that together with the drawcord adjustment traps the heat inside the bag. Full-length, two-way zipper means you can open the bag at the feet, and a padded flap along the opening blocks cold drafts. Large foot box provides plenty of space for your feet. Small inner pocket for things you want to have close at hand. Eyelets at the feet for hang-drying. Pack bag included. Comfort temperature (men) of -4℃ (women +2°C). Fits individuals up to 180 centimetres tall.

Tootekirjeldus inglise keeles: Clinique Lash Power Mascara Long-Wearing FormulaMascara with staying power. Vows to look pretty for 24 hours without a smudge or smear. Lasts through rain, sweat, humidity, tears. Yet the formula removes easily with warm water. Unique brush reaches and beautifully lengthens even the tiniest lashes. Ophthalmologist Tested.How to UseInnovative thermal technology that helps it stay put for 24 hours is easy to remove.Use fingertips to splash warm water (bath temperature is ideal) on lashes several times and press gently.Or, wet a cotton pad with warm water, press to eye, then wipe away.Not recommended for use with Lash Building Primer.

EK-Quantum Vector Direct RTX RE Ti D-RGB high-performance water block is a version of the EK-Quantum Vector water block where the terminal is removed for added compatibility with space-constrained cases. Instead, the fittings are screwed directly into the top allowing for a narrower enclosure. This water block is designed for multiple reference NVIDIA® GeForce® RTX 2080 Ti graphics cards. For detailed compatibility, we recommend that you refer to the EK® Cooling Configurator. The cooling engine is tweaked for even more performance with an optimized flow pattern. It also offers extended compatibility fitting more reference design based graphics cards. The water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as cooling liquid is channeled directly over these critical areas. These water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK® Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance of these water blocks. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of glass-like Acrylic. Sealing is ensured by high-quality EPDM O-Rings. The brass standoffs are already pre-installed and allow for a safe and easy installation procedure. The front aesthetic corner piece is lit up with an addressable LED strip. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB(addressable) header. EK® recommends the purchase of a retention backplate which improves the aesthetics of your graphics cards, but also provides additional passive cooling to the GPU core and circuit board VRM section. EK-Quantum Vector Direct RTX RE Ti D-RGB is not compatible with multiple-GPU connectivity products like EK-Scalar Series due to having no terminal. Enclosed: - EK-Quantum Vector Direct RTX RE Ti D-RGB series high-performance water block - Mounting mechanism with screw-in brass standoffs - Necessary mounting screws, nuts, and washers - 2x Nickel plated brass plug G1/4” - 6mm Allen key - Thermal pads - Thermal grease EK-TIM Ectotherm (1g) Made in Slovenia - Europe!

EK-Quantum Momentum ROG Strix X570-E D-RGB is a Quantum Line monoblock specially designed for the ROG Strix X570-E Gaming motherboard, featuring the latest cooling engine with low restriction and high performance. This is a complete all-in-one (CPU and motherboard) liquid cooling solution for Ryzen AMD processors. This Momentum monoblock is compatible with the ROG Strix X570-E Gaming. This monoblock uses the latest generation of EK cooling engine used on the Quantum lineup to ensure the best possible CPU cooling while not reducing flow to other components. This water block directly cools the AM4 socket type CPU, as well as the voltage regulation (MOSFET) module. Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks. Like with every EK monoblock, EK-Quantum Momentum ROG Strix X570-E D-RGB features high flow design and it can be easily used with the system using a weaker water pump or lower pump speed settings as well. The Momentum monoblock also comes with sophisticated D-RGB (addressable) lightning which connects to an Aura Addressable Gen2 header. The base of the monoblock is made of nickel-plated electrolytic copper while the top is made of quality acrylic glass material. The nickel-plated brass screw-in standoffs are pre-installed and allow for easy installation. Unlike other solution on the market, this is a true one-piece, sturdy and reliable liquid cooling product which requires only two connector fittings for proper operation. The enclosed thermal pad is used on voltage regulator modules to improve stability, performance and prolongs the lifespan of the motherboard. For the CPU, please use the enclosed (electrically non-conductive) thermal grease EK-TIM Ectotherm. This product is compatible with ASUS Aura Sync RGB control software. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the AURA addressable Gen2 LED header (ADD GEN2_1 and ADD GEN2_2 marked headers). Technical specifications: - RGB connector 3-pin 5V digital LED header (Pinout: +5V, D, Blocked, Ground) Enclosed: - EK-Quantum Momentum ROG Strix X570-E D-RGB Monoblock - Mounting mechanism - Thermal grease EK-TIM Ectotherm - Thermal pads - Backplate Made in Slovenia - Europe!

The EK-Quantum Vector Strix RTX 3080/3090 D-RGB water block is compatible with the ROG Strix RTX 3080 and 3090 graphics cards. The Vector water block actively cools the GPU, the VRAM (on the front), the MOSFETs in the VRM (voltage regulation module), the PWM controller and all chokes including the input rail. The water block contacts each individual inductor to suppress any possible whimpering of the coil. EK water block for Vector ROG Strix 3080/3090 Acetal These newly developed water blocks have optimised flow paths that reduce hydrodynamic instabilities and turbulence (dead spots) in their interior. In addition, this new design allows the copper cold plate to expand almost the entire length of the PCB, which also cools less critical components for maximum efficiency. The EK-Quantum Vector series water blocks use an open split-flow cooling motor design that has proven to be the superior solution for GPU water blocks. It features low hydraulic flow restriction, which means it can be used with weaker water pumps or with pumps running at low speeds and still achieve peak performance. The geometry of the nozzle plate and fin structure has been optimised to ensure even flow distribution with minimum losses and optimum performance in any orientation of the coolant flow. The Fin Array is equipped with 28 micro fins with 0.6 mm wide micro-channels that provide optimum cooling performance without unnecessary flow restrictions or risk of clogging. The base of the block is CNC-machined from nickel-plated electrolytic copper, while the top is CNC-machined from durable black POM acetal. These 2nd generation Vector GPU water blocks also have acetal connections to match the top cover. The watertight seal is ensured by high quality EPDM O-rings, while brass spacers are pre-installed for a safe and easy installation process. D-RGB lighting on EK-Quantum Vector Strix RTX 3080/3090 D-RGB water block The aesthetic corner end piece accommodates the addressable D-RGB LEDs. This water block has a total of 6 individually addressable RGB LEDs and is compatible with the common RGB synchronisation technologies of all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector must be aligned with the +5V marking on the D-RGB (addressable) pin header. Back plate for the water block ROG Strix 3080/3090 EK recommends the purchase of a retention backplate that improves the overall aesthetics of your graphics cards and also provides additional passive cooling for the GPU core, VRAM on the 3090 cards and the back of the VRM area of the board. Enclosed: EK-Quantum Vector Strix RTX 3080/3090 D-RGB series high performance water block Mounting mechanism with screw-in brass spacers Required fixing screws, nuts and washers 2x nickel-plated brass plugs G1/4 EK-loop multiple Allen spanner (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Technical specification: Dimensions: (LxHxW) - 293x154x16,5mm D-RGB cable length: 500 mm Number of D-RGB LEDs: 12 D-RGB connector standard 3-pole (+5V, data, blocked, ground)

EK-Quantum Momentum TRX40 Aorus Master D-RGB is the 2nd generation of all-in-one monoblock (CPU and motherboard) liquid cooling solutions tailor-made for AMD® Ryzen™ Threadripper™ processors. The primary goal in designing the new sTRX4 socket EK-Quantum Momentum monoblock was to cover the entire IHS of the AMD HEDT Ryzen Threadripper processor in order to improve the overall cooling performance. The EK-Quantum Momentum TRX40 Aorus Master D-RGB is compatible with the Gigabyte® Aorus TR40X motherboards that supports Socket sTRX4 AMD Ryzen Threadripper processors. This monoblock is compatible with the following Aorus motherboards: •Aorus TRX40 Master This TRX40 platform-based monoblock also comes with a bigger redesigned cold plate. The new design ensures the monoblock has mechanical contact with the entire 3rd Gen Ryzen™ Threadripper™ processor IHS, thus enabling better thermal transfer. The base of the monoblock is CNC-milled of the purest electrolytic copper while the top is machined the same way out of high-quality glass-like cast acrylic. The main nickel plated mounting screws and brass screw-in standoffs are pre-installed, making the installation process quick and easy. The cold-plate features 91 micro-fins that span across all chiplets within AMD’s CPU, thus ensuring proper cooling for each of them, at all times, even when certain cores work in Turbo mode. It covers the critical components under the I/O cover, such as the additional VRM components and the dual network chips, with active cooling. At the same time, the factory I/O cover is fully compatible with this motherboard cooling solution. The bottom of the water block features a CNC milled black anodized cover that houses the addressable D-RGB LED strip and also has the function of hiding the unwanted LED hotspots. Unlike other solutions on the market, this is a true one-piece, sturdy and reliable liquid cooling product that requires only two connector fittings for proper operation. The bottom left Out port is carefully placed to be on the exact same height as the EK-Quantum Vector GPU block with an EK-Quantum Torque 90° angled fitting installed to it. This makes the tube routing very clean and simple, using just one piece of tubing bent at an angle od 90° to connect it with the GPU block. The monoblock is equipped with a D-RGB LED strip that connects to the dedicated digital 3-pin addressable D_LED header on the motherboard. Using the addressable D_LED header, users can individually address color to each LED on the monoblocks integrated addressable D-RGB LED strip. The LED strip cover can easily be removed for adjusting the cable orientation or replacing the Digital LED strip with an ordinary LED strip or any other custom solution as well. The enclosed thermal pad is used on voltage regulator modules to improve the cooling performance of the water block. For the CPU please use the enclosed (electrically non-conductive) thermal grease EK-TIM Ectotherm. Enclosed: - EK-Quantum Momentum TRX40 Aorus Master D-RGB Monoblock - Mounting mechanism - Thermal grease EK-TIM Ectotherm - Thermal pads CPU socket compatibility: - AMD Socket sTRX4 for listed motherboards Made in Slovenia - Europe!

The kryographics NEXT RTX 3080 / 3090 from Aqua Computer, is a complete graphics card cooler for the reference design of the Nvidia RTX 3080 or RTX 3090. The copper base of the cooler is in contact with all the components of the graphics card to be cooled. In addition, the cooler has a stainless steel jetplate for excellent cooling performance and wide channels for low flow resistance. The cooler is rounded off by its attractive acrylic glass cover, which reveals the view of the cooling liquid, in contrast to the black frame, made of anodised aluminium. The appearance is even more impressive when the 15 addressable RGBpx LEDs illuminate the interior and the outer edge. For this purpose, the kryographics NEXT must be connected to an Aqua Computer device with RGBpx output or a mainboard with compatible output. Important: The delivery does not include a graphics card. The cooler is delivered without connectors, therefore suitable connectors are still needed. Technical Data: Material: Copper Material Cover: Acrylic Glas, Aluminium (anodized) Jet plate: Stainless Steel Terminal: Acetal Scope of Delivery: Water block without hose connectors (threads G1/4) Two G1/4 sealing screws Thermal compound Thermal Grizzly Kryonaut, approx. 0.5 grams in syringe Plastic spatula Thermally conductive pad Mounting material RGBpx connection cable 50 cm RGBpx adapter

The Alphacool Aurora Plexi GPX-N RTX 3080/3090 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Plexi GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3080/3090 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3080/3090 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3080/3090 Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3080/3090 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3080/3090 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3080/3090 Plexi is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate - The Founders Edition, does NOT correspond to the Reference Design! Compatibility list: ATTENTION: The following models were visually checked for compatibility. Please note that this list may change at short notice. More compatible models will follow in this list for this cooler. We are currently checking other PCB designs from various manufacturers! RTX 3080 Zotac GAMING GeForce RTX 3080 Trinity (ZT-A30800D-10P) PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXMPB) PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXPPB) Inno3D GeForce RTX 3080 iChill X4 10240 MB GDDR6X (C30804-106XX-1810VA36) Inno3D GeForce RTX 3080 Twin X2 OC 10240 MB GDDR6X (N30802-106XX-1810VA34) Inno3D GeForce RTX 3080 iChill X3 10240 MB GDDR6X (C30803-106XX-1810VA37) Palit GeForce RTX™ 3080 GamingPro (NED30800191A-132AA) Palit GeForce RTX™ 3080 GamingPro OC (NED3080S191A-132AA) Galax GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI (38NWM3MD99NN) KFA2 GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI (38NWM3MD99NK) Gainward RTX 3080 Phoenix Gainward RTX 3080 Phoenix GS Galakuro NVIDIA GEFORCE RTX 3080 GG-RTX3080-E10GB/TP RTX 3090 PNY GeForce RTX 3090 XLR8 Gaming EPIC-X RGB, 24576 MB GDDR6X (VCG309024TFXPPB) Inno3D GeForce RTX 3090 iChill X3, 24576 MB GDDR6X (C30903-246XX-1880VA37) Inno3D GeForce RTX 3090 Gaming X3, 24576 MB GDDR6X (N30903-246X-1880VA37N) Inno3D GeForce RTX 3090 iChill X4, 24576 MB GDDR6X (C30904-246XX-1880VA36) Zotac GeForce RTX 3090 Trinity, 24576 MB GDDR6X (ZT-A30900D-10P) Palit GeForce RTX™ 3080 GamingPro (NED3090019SB-132BA) Palit GeForce RTX™ 3080 GamingPro OC (NED3090S19SB-132BA) Galax GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI/ (39NSM5MD1GNA) KFA2 GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI/ Gainward RTX 3090 Phoenix Gainward RTX 3090 Phoenix GS Galakuro NVIDIA GEFORCE RTX 3090 GG-RTX3090-E24GB/TP Technical data: L x W x B: 224,9 x 121,4 x 25,5 mm Material cooler: Nickle plated copper Material top: Plexi Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Power connector Digital RGB: 3-Pin 5V (0,5A) Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards (Note: RTX 3090/3080 cards will be added after their release) Download data sheet: Alphacool Eisblock Aurora Plexi GPX-N RTX 3090/3080

EK-Quantum Vector RTX 3080/3090 D-RGB water block is compatible with most reference designs (not Founders Edition) GeForce RTX 3080 and 3090 graphics cards. It is specially designed with a much thicker copper base to reduce the high capacitors of most reference design graphics cards. This gives the water block the advantage of a wider compatibility list without restricting the flow of coolant. EK water block for Nvidia 3080 and 3090 reference board The Vector water block directly cools the GPU, the VRAM and the VRM (voltage control module), as a cooling liquid is passed directly over these critical areas. The water block is in contact with MOSFETs and chokes to maximise cooling and minimise the risk of coil howl. These newly developed water blocks have optimised flow paths that reduce hydrodynamic instabilities and turbulence (dead spots) inside them. In addition, this new design allows the connector to be screwed directly onto the copper cold plate of the GPU block, making it stiffer and reducing the risk of damage to the water block. The EK-Quantum Vector series water blocks use an open split-flow cooling motor design that has proven to be the superior solution for GPU water blocks. It features low hydraulic flow restriction, which means it can be used with weaker water pumps or low speed pumps and still achieve peak performance. The geometry of the nozzle plate and fin structure has been optimised to ensure even flow distribution with minimal losses and optimum performance in any orientation of the coolant flow. The Fin Array is equipped with 27 micro fins with 0.5 mm wide micro-channels that provide optimum cooling performance without unnecessary flow restrictions or risk of clogging. EK water block for Nvidia reference board 3080 and 3090 The base of the block is CNC-milled from nickel-plated electrolytic copper, while the top is CNC-milled from glass-like cast acrylic glass. These 2nd generation Vector GPU water blocks also have Plexiglas connectors to match the top cover. The watertight seal is ensured by high quality EPDM O-rings, while brass spacers are pre-installed for a safe and easy installation process. D-RGB lighting on EK-Quantum Vector RTX 3080/3090 D-RGB water block The aesthetic end piece houses the addressable D-RGB LED strip. This water block has a total of 5 individually addressable RGB LEDs and is compatible with the common RGB synchronisation technologies of all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector must be aligned with the +5V marking on the D-RGB (addressable) pin header. Back plate for the water block 3080/3090 EK recommends the purchase of a retention backplate that improves the overall aesthetics of your graphics cards and also provides additional passive cooling for the GPU core, VRAM on the 3090 cards and the back of the VRM area of the board. Enclosed: EK-Quantum Vector RTX 3080/3090 D-RGB series high performance water block Mounting mechanism with screw-in brass spacers Required fixing screws, nuts and washers 2x nickel-plated brass plugs G1/4 EK-loop multiple Allen spanner (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Technical specification: Dimensions: (LxHxW) - 220x124x20,5mm D-RGB cable length: 500 mm Number of D-RGB LEDs: 5 D-RGB connector standard 3-pin (+5V, data, blocked, ground)

Le refroidisseur de GPU EK-Quantum Vector XC3 RTX 3080/3090 D-RGB, a été développé sur la base de la série Vector de 2ème génération et conçu pour les cartes graphiques EVGA XC3 RTX 3080 et 3090. Le bloc d'eau Vector refroidit directement le GPU, le VRAM et le VRM (module de régulation de la tension) en dirigeant le fluide de refroidissement directement sur ces zones critiques. La base du bloc est en cuivre nickelé, tandis que le sommet est en acrylique. De plus, le refroidisseur est doté d'un éclairage D-RGB, avec un total de 5 LEDs adressables individuellement, ce qui fait briller agréablement l'embout. L'éclairage est compatible avec les technologies de synchronisation RGB de tous les grands fabricants de cartes mères, telles que ASRock Polychrome Sync, ASUS Aura Sync, Gigabyte RGB Fusion et MSI Mystic Light. Comme le refroidisseur GPU n'a pas de plaque arrière, il est recommandé de commander également une plaque arrière assortie. Une telle plaque arrière améliore non seulement la stabilité, mais favorise également les performances de refroidissement, car elle sert également de refroidisseur passif. Technical Data: Dimensions: 275 x 124 x 20.5mm (L x H x W) Material: Nickel-Plated Copper, Acryl Threads: G1/4" Scope of Delivery: EK-Quantum Vector TUF RTX 3080/3090 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility EVGA GeForce RTX 3080 XC3 Black Gaming (10G-P5-3881-KR) EVGA GeForce RTX 3080 XC3 Gaming (10G-P5-3883-KR) EVGA GeForce RTX 3080 XC3 Ultra Gaming (10G-P5-3885-KR) EVGA GeForce RTX 3080 XC3 Ultra Hybrid Gaming (10G-P5-3888-KR) EVGA GeForce RTX 3080 XC3 Ultra Hydro Copper Gaming (10G-P5-3889-KR) EVGA GeForce RTX 3090 XC3 Black Gaming (24G-P5-3971-KR) EVGA GeForce RTX 3090 XC3 Gaming (24G-P5-3973-KR) EVGA Geforce RTX 3090 XC3 Ultra Gaming (24G-P5-3975-KR) EVGA GeForce RTX 3090 XC3 Ultra Hybrid Gaming (24G-P5-3978-KR) EVGA GeForce RTX 3090 XC3 Ultra Hydro Copper Gaming (24G-P5-3979-KR)

The Alphacool Aurora Acetal GPX-N RTX 3080/3090 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acetal GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3080/3090 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3080/3090 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3080/3090 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top. On the front of the terminal you can see the corresponding names of the compatible graphic card types. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3080/3090 Acetal is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate - The Founders Edition, does NOT correspond to the Reference Design! Technical data: L x W x B: 224,9 x 121,4 x 25,5 mm Material cooler: Nickle plated copper Material top: Acetal Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards (Note: RTX 3090/3080 cards will be added after their release) Compatibility list: ATTENTION: The following models were visually checked for compatibility. Please note that this list may change at short notice. More compatible models will follow in this list for this cooler. We are currently checking other PCB designs from various manufacturers! RTX 3080 Zotac GAMING GeForce RTX 3080 Trinity (ZT-A30800D-10P) Zotac Gaming GeForce RTX 3080 Trinity OC (ZT-A30800J-10P) PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXMPB) PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXPPB) Inno3D GeForce RTX 3080 iChill X4 10240 MB GDDR6X (C30804-106XX-1810VA36) Inno3D GeForce RTX 3080 Twin X2 OC 10240 MB GDDR6X (N30802-106XX-1810VA34) Inno3D GeForce RTX 3080 iChill X3 10240 MB GDDR6X (C30803-106XX-1810VA37) Palit GeForce RTX™ 3080 GamingPro (NED30800191A-132AA) Palit GeForce RTX™ 3080 GamingPro OC (NED3080S191A-132AA) Galax GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI (38NWM3MD99NN) KFA2 GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI (38NWM3MD99NK) Gainward RTX 3080 Phoenix Gainward RTX 3080 Phoenix GS Galakuro NVIDIA GEFORCE RTX 3080 GG-RTX3080-E10GB/TP RTX 3090 PNY GeForce RTX 3090 XLR8 Gaming EPIC-X RGB, 24576 MB GDDR6X (VCG309024TFXPPB) Inno3D GeForce RTX 3090 iChill X3, 24576 MB GDDR6X (C30903-246XX-1880VA37) Inno3D GeForce RTX 3090 Gaming X3, 24576 MB GDDR6X (N30903-246X-1880VA37N) Inno3D GeForce RTX 3090 iChill X4, 24576 MB GDDR6X (C30904-246XX-1880VA36) Zotac GeForce RTX 3090 Trinity, 24576 MB GDDR6X (ZT-A30900D-10P) Palit GeForce RTX™ 3080 GamingPro (NED3090019SB-132BA) Palit GeForce RTX™ 3080 GamingPro OC (NED3090S19SB-132BA) Galax GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI/ (39NSM5MD1GNA) KFA2 GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI/ Gainward RTX 3090 Phoenix Gainward RTX 3090 Phoenix GS Galakuro NVIDIA GEFORCE RTX 3090 GG-RTX3090-E24GB/TP Download manual PDF: Alphacool Eisblock Aurora Acetal GPX-N RTX 3090/3080 Download data sheet PDF: Alphacool Eisblock Aurora Acetal GPX-N RTX 3090/3080

The Alphacool Aurora Plexi GPX-N RTX 3080/3090 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Plexi GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3080/3090 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3080/3090 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3080/3090 Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3080/3090 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3080/3090 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3080/3090 Plexi is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate - The Founders Edition, does NOT correspond to the Reference Design! Technical data: L x W x B: 224,9 x 121,4 x 25,5 mm Material cooler: Nickle plated copper Material top: Plexi Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Power connector Digital RGB: 3-Pin 5V (0,5A) Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards (Note: RTX 3090/3080 cards will be added after their release) Compatibility list: ATTENTION: The following models were visually checked for compatibility. Please note that this list may change at short notice. More compatible models will follow in this list for this cooler. We are currently checking other PCB designs from various manufacturers! RTX 3080 Zotac GAMING GeForce RTX 3080 Trinity (ZT-A30800D-10P) Zotac Gaming GeForce RTX 3080 Trinity OC (ZT-A30800J-10P) PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXMPB) PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXPPB) Inno3D GeForce RTX 3080 iChill X4 10240 MB GDDR6X (C30804-106XX-1810VA36) Inno3D GeForce RTX 3080 Twin X2 OC 10240 MB GDDR6X (N30802-106XX-1810VA34) Inno3D GeForce RTX 3080 iChill X3 10240 MB GDDR6X (C30803-106XX-1810VA37) Palit GeForce RTX™ 3080 GamingPro (NED30800191A-132AA) Palit GeForce RTX™ 3080 GamingPro OC (NED3080S191A-132AA) Galax GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI (38NWM3MD99NN) KFA2 GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI (38NWM3MD99NK) Gainward RTX 3080 Phoenix Gainward RTX 3080 Phoenix GS Galakuro NVIDIA GEFORCE RTX 3080 GG-RTX3080-E10GB/TP RTX 3090 PNY GeForce RTX 3090 XLR8 Gaming EPIC-X RGB, 24576 MB GDDR6X (VCG309024TFXPPB) Inno3D GeForce RTX 3090 iChill X3, 24576 MB GDDR6X (C30903-246XX-1880VA37) Inno3D GeForce RTX 3090 Gaming X3, 24576 MB GDDR6X (N30903-246X-1880VA37N) Inno3D GeForce RTX 3090 iChill X4, 24576 MB GDDR6X (C30904-246XX-1880VA36) Zotac GeForce RTX 3090 Trinity, 24576 MB GDDR6X (ZT-A30900D-10P) Palit GeForce RTX™ 3080 GamingPro (NED3090019SB-132BA) Palit GeForce RTX™ 3080 GamingPro OC (NED3090S19SB-132BA) Galax GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI/ (39NSM5MD1GNA) KFA2 GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI/ Gainward RTX 3090 Phoenix Gainward RTX 3090 Phoenix GS Galakuro NVIDIA GEFORCE RTX 3090 GG-RTX3090-E24GB/TP Download manual PDF: Alphacool Eisblock Aurora Plexi GPX-N RTX 3090/3080 Download data sheet PDF: Alphacool Eisblock Aurora Plexi GPX-N RTX 3090/3080

The Alphacool Aurora Acryl GPX-N RTX 3070 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3070 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3070 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3070 Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3070 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3070 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3070 Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate - The Founders Edition, does NOT correspond to the Reference Design! Technical data: L x W x B: 122 x 239 x 25 mm Material cooler: Nickle plated copper Material top: Acryl Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards (Note: RTX 3070 cards will be added after their release) Compatibility list: More compatible models will follow in this list for this cooler. We are currently checking other PCB designs from various manufacturers! RTX 3070 - INNO3D GeForce RTX 3070 iCHILL X3, 8GB GDDR6, HDMI, 3x DP (C30703-08D6X-1710VA38) - INNO3D GeForce RTX 3070 iCHILL X4, 8GB GDDR6, HDMI, 3x DP (C30704-08D6X-1710VA35) Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 with Backplate (Reference) Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 with Backplate (Reference)

The EK-Quantum Vector TUF RTX 3080/3090 D-RGB GPU cooler, has been further developed based on the 2nd generation Vector series and designed for the ASUS TUF RTX 3080 and 3090 graphics cards. The Vector water block directly cools the GPU, VRAM and VRM (voltage regulation module), as the cooling liquid is directly directed over these critical areas. The base of the block is made of nickel-plated copper, while the top is made of acrylic. Furthermore, the cooler has D-RGB lighting, with a total of 6 individually addressable LEDs, which makes the interior shine pleasantly. The lighting is compatible with all common RGB sync technologies of the major motherboard manufacturers, such as ASRock Polychrome Sync, ASUS Aura Sync, Gigabyte RGB Fusion and MSI Mystic Light. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate. Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 267 x 148 x 16.5mm (L x H x W) Material: Nickel-Plated Copper, Acryl Threads: G1/4" Scope of Delivery: EK-Quantum Vector TUF RTX 3080/3090 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility ASUS TUF RTX 3080 10G Gaming ASUS TUF RTX 3080 10G Gaming OC ASUS TUF RTX 3090 24G Gaming ASUS TUF RTX 3090 24G Gaming OC

The EK-Quantum Vector Trinity RTX 3080/3090 D-RGB GPU cooler, has been further developed based on the 2nd generation Vector series and designed for the Zotac Trinity RTX 3080 and 3090 graphics cards. The Vector water block directly cools the GPU, VRAM and VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The base of the block is made of nickel-plated copper, while the top is made of acetal. Furthermore, the cooler has D-RGB lighting, with a total of 12 individually addressable LEDs, which makes the end piece shine pleasantly. The lighting is compatible with all common RGB sync technologies of the major motherboard manufacturers, such as ASRock Polychrome Sync, ASUS Aura Sync, Gigabyte RGB Fusion and MSI Mystic Light. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate. Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 231 x 124 x 20.5mm (L x H x W) Material: Nickel-Plated Copper, Acetal Threads: G1/4" D-RGB cable length: 500mm D-RGB LED count: 12 D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) Scope of Delivery: EK-Quantum Vector Trinity RTX 3080/3090 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility VGA FullCover Zotac Zotac Gaming GeForce RTX 3080 AMP Extreme Holo, 10GB GDDR6X, HDMI, 3x DP (ZT-A30800B-10P) (visual) VGA FullCover Zotac Zotac Gaming GeForce RTX 3080 AMP Holo, 10GB GDDR6X, HDMI, 3x DP (ZT-A30800F-10P) (visual) VGA FullCover Zotac Zotac GAMING GeForce RTX 3080 Trinity (ZT-A30800D-10P) VGA FullCover Zotac Zotac Gaming GeForce RTX 3080 Trinity OC, 10GB GDDR6X, HDMI, 3x DP (ZT-A30800J-10P) VGA FullCover Zotac Zotac GAMING GeForce RTX 3090 Trinity (ZT-A30900D-10P)

The EK-Quantum Vector Trinity RTX 3080/3090 D-RGB GPU cooler, has been further developed based on the 2nd generation Vector series and designed for the Zotac Trinity RTX 3080 and 3090 graphics cards. The Vector water block directly cools the GPU, VRAM and VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The base of the block is made of nickel-plated copper, while the top is made of acrylic. Furthermore, the cooler has D-RGB lighting, with a total of 5 individually addressable LEDs, which makes the interior shine pleasantly. The lighting is compatible with all common RGB sync technologies of the major motherboard manufacturers, such as ASRock Polychrome Sync, ASUS Aura Sync, Gigabyte RGB Fusion and MSI Mystic Light. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate. Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 231 x 124 x 20.5mm (L x H x W) Material: Nickel-Plated Copper, Acryl Threads: G1/4" D-RGB cable length: 500mm D-RGB LED count: 5 D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) Scope of Delivery: EK-Quantum Vector Trinity RTX 3080/3090 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility Zotac Gaming GeForce RTX 3080 AMP Extreme Holo, 10GB GDDR6X, HDMI, 3x DP (ZT-A30800B-10P) (visual) Zotac Gaming GeForce RTX 3080 AMP Holo, 10GB GDDR6X, HDMI, 3x DP (ZT-A30800F-10P) (visual) Zotac GAMING GeForce RTX 3080 Trinity (ZT-A30800D-10P) Zotac Gaming GeForce RTX 3080 Trinity OC, 10GB GDDR6X, HDMI, 3x DP (ZT-A30800J-10P) Zotac GAMING GeForce RTX 3090 Trinity (ZT-A30900D-10P)

The EK-Quantum Vector RX 6800/6900 GPU cooler, has been further developed based on the 2nd generation Vector series and is compatible with most reference designs of RX 6800, RX 6800XT and RX 6900 graphics cards. The Vector RE water block directly cools the GPU, the VRAM and the VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The base of the block is made of nickel-plated copper, while the top is made of acrylic. Furthermore, the cooler has D-RGB lighting, with a total of 6 individually addressable LEDs, which makes the interior shine pleasantly. The lighting is compatible with all common RGB sync technologies of the major motherboard manufacturers, such as ASRock Polychrome Sync, ASUS Aura Sync, Gigabyte RGB Fusion and MSI Mystic Light. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate. Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 283 x 139 x 16.5mm (L x H x W) Material: Nickel-Plated Copper, Acryl Threads: G1/4" Scope of Delivery: EK-Quantum Vector RX 6800/6900 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility AMD Radeon RX 6800 AMD Radeon RX 6800 XT AMD Radeon RX 6900 XT ASROCK Radeon RX 6800 16GB (visual) ASROCK Radeon RX 6900 XT 16GB (visual) ASUS Radeon RX 6800 XT 16GB(visual) ASUS Radeon RX 6800, RX6800-16G, 16GB GDDR6 (90YV0FY0-U0NA00) (visual) ASUS Radeon RX 6900 XT 16GB (RX6900XT-16G) (visual) BIOSTAR Radeon RX 6900 XT 16GB (visual) GIGABYTE Radeon RX 6800 16GB (visual) GIGABYTE Radeon RX 6800 XT 16GB (visual) Gigabyte Radeon RX 6900 XT, 16GB GDDR6, HDMI, 2x DP, USB-C (GV-R69XT-16GC-B) (visual) MSI Radeon RX 6800 16GB (visual) MSI Radeon RX 6800 XT 16GB (visual) MSI Radeon RX 6900 XT 16GB (visual) POWERCOLOR Radeon RX 6900 XT 16GB (visual) SAPPHIRE Radeon RX 6800 16GB (visual) SAPPHIRE Radeon RX 6900 XT 16GB (21308-01-20G) (visual) SAPPHIRE RX 6800 XT 16GB (visual)

The Alphacool Aurora Plexi GPX-N RTX 3080/3090 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Plexi GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3080/3090 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3080/3090 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3080/3090 Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3080/3090 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3080/3090 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3080/3090 Plexi is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate Technical data: L x W x B: 142,1 x 238 x 22,5 mm Material cooler: Nickle plated copper Material top: Plexi Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Power connector Digital RGB: 3-Pin 5V (0,5A) Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards (Note: RTX 3090/3080 cards will be added after their release) Compatibility list: ASUS TUF Gaming GeForce RTX 3080 OC, TUF-RTX3080-O10G-GAMING, 10GB GDDR6X, 2x HDMI, 3x DP (90YV0FB1-M0NM00) ASUS TUF Gaming GeForce RTX 3080, TUF-RTX3080-10G-GAMING, 10GB GDDR6X, 2x HDMI, 3x DP (90YV0FB0-M0NM00) ASUS TUF Gaming GeForce RTX 3090, TUF-RTX3090-24G-GAMING, 24GB GDDR6X, 2x HDMI, 3x DP (90YV0FD0-M0NM00) ASUS TUF Gaming GeForce RTX 3090 OC, TUF-RTX3090-O24G-GAMING, 24GB GDDR6X, 2x HDMI, 3x DP (90YV0FD1-M0NM00) Download manual PDF: Alphacool Eisblock Aurora Plexi GPX-N RTX 3090/3080 TUF with Backplate Download data sheet PDF: Alphacool Eisblock Aurora Plexi GPX-N RTX 3090/3080 TUF with Backplate

This back plate is manufactured from massive aluminum and can be mounted in addition to a kryographics NEXT RTX 3090 water block, giving additional stability especially in the voltage regulator area of the graphics card. Additionally, the RAM modules on the back of the graphics card are cooled effectively. The back plate is anodized in black color. For optimum heat dissipation, the back plate is connected to the water cooling system by a heatpipe. The back plate comes with a connection terminal that replaces the terminal originally installed to the kryographics water block. Materials: Back plate: Aluminum, anodized Heatpipe: Copper, nickel plated Fixing plate (heatpipe): Stainless steel Connection terminal: Acetal Scope of delivery: One back plate One heatpipe One connection terminal Thermal conductive pads mounting material Please note: Graphics card and kryographics water block are not included in delivery, please order separately.

The EK-Quantum Vector Strix RTX 3080/3090 D-RGB water block is compatible with the ROG Strix RTX 3080 and 3090 graphics cards. The Vector water block actively cools the GPU, the VRAM (on the front), the MOSFETs in the VRM (voltage regulation module), the PWM controller and all chokes including the input rail. The water block contacts each individual inductor to suppress any possible whimpering of the coil. EK water block for ROG Strix RTX 3080/3090 These newly developed water blocks have optimised flow paths that reduce hydrodynamic instabilities and turbulence (dead spots) in their interior. In addition, this new design allows the copper cold plate to expand almost the entire length of the PCB, which also cools less critical components for maximum efficiency. The EK-Quantum Vector series water blocks use an open split-flow cooling motor design that has proven to be the superior solution for GPU water blocks. It features low hydraulic flow restriction, which means it can be used with weaker water pumps or with pumps running at low speeds and still achieve peak performance. The geometry of the nozzle plate and fin structure has been optimised to ensure even flow distribution with minimum losses and optimum performance in any orientation of the coolant flow. The Fin Array is equipped with 28 micro fins with 0.6 mm wide micro-channels that provide optimum cooling performance without unnecessary flow restrictions or risk of clogging. The base of the block is CNC milled from nickel-plated electrolytic copper, while the top is CNC milled from vitreous cast acrylic glass. These 2nd generation Vector GPU water blocks also have Plexiglas connectors to match the top cover. The watertight seal is ensured by high quality EPDM O-rings, while brass spacers are pre-installed for a safe and easy installation process. D-RGB lighting on EK-Quantum Vector Strix RTX 3080/3090 D-RGB water block The aesthetic corner end piece accommodates the addressable D-RGB LEDs. This water block has a total of 6 individually addressable RGB LEDs and is compatible with the common RGB synchronisation technologies of all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector must be aligned with the +5V marking on the D-RGB (addressable) pin header. Back plate for the EK-Quantum Vector ROG Strix 3080/3090 water block EK recommends the purchase of a retention backplate especially for the 3090 models of graphics cards. The retention backplate improves the overall aesthetics of your graphics cards and also provides additional passive cooling for the GPU core, VRAM on the 3090 cards and the back of the VRM section of the board. Enclosed: EK-Quantum Vector Strix RTX 3080/3090 D-RGB series high performance water block Mounting mechanism with screw-in brass spacers Required fixing screws, nuts and washers 2x nickel-plated brass plugs G1/4 EK-loop multiple Allen spanner (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Technical specification: Dimensions: (LxHxW) - 293x154x16,5mm D-RGB cable length: 500 mm Number of D-RGB LEDs: 6 D-RGB connector standard 3-pin (+5V, data, blocked, ground)

The EK-Quantum Vector RE RTX 3080/3090 GPU cooler, has been further developed based on the 2nd generation Vector series and is compatible with most reference designs of RTX 3080/3090 graphics cards. The Vector RE water block directly cools the GPU, VRAM and VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The copper base is much thicker than previous Vector models. The top is made almost entirely of acrylic. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate (e.g. item 1020619). Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 220 x 124 x 20.5mm (L x H x W) Material: Copper, Acryl Threads: G1/4" Scope of Delivery: EK-Quantum Vector RE RTX 3080/3090 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility EMTEK GeForce RTX 3080 10GB Black Edition OC Gainward GeForce RTX 3080 Phoenix Gainward GeForce RTX 3080 Phoenix GS Gainward GeForce RTX 3090 Phoenix Gainward GeForce RTX 3090 Phoenix GS GALAX GeForce RTX 3080 SG (1-Click OC) (38NWM3MD99NN) GALAX GeForce RTX 3090 SG (1-Click OC) (39NSM5MD1GNA) KFA2 GeForce RTX 3080 SG (1-Click OC) (38NWM3MD99NK) KFA2 GeForce RTX 3080 SG 10GB (38NWM3MD99NK) KFA2 GeForce RTX 3090 SG (1-Click OC) (39NSM5MD1GNK) KUROUTOSHIKOU GeForce RTX 3090 24GB GALAKURO (GG-RTX3090-E24GB/TP) Palit GeForce RTX 3080 GamingPro (NED3080019IA-132AA) Palit GeForce RTX 3080 GamingPro OC (NED3080S19IA-132AA) Palit GeForce RTX 3090 GamingPro (NED3090019SB-132BA) Palit GeForce RTX 3090 GamingPro OC (NED3090S19SB-132BA) PNY GeForce RTX 3080 10GB XLR8 Gaming EPIC-X RGB Triple Fan Edition (VCG308010TFXPPB) PNY GeForce RTX 3090 24GB XLR8 Gaming EPIC-X RGB Triple Fan Edition (VCG309024TFXPPB) PNY GeForce RTX 3090 OC XLR8 Gaming Epic-X RGB Triple Fan Edition, 24GB GDDR6X, HDMI, 3x DP (VCG309024TFXMPB)

The Alphacool Aurora Acryl GPX-A 6800(XT) Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-A 6800(XT) graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-A 6800(XT) cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-A 6800(XT) Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-A 6800(XT) Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-A 6800(XT) also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-A 6800(XT) Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate Technical data: L x W x B: 152 x 295 x 22 mm Material cooler: Nickle plated copper Material top: Acryl Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Power connector Digital RGB: 3-Pin 5V (0,5A) Graphics Card Configurator: Click here! List of Compatibility: AMD graphic cards Compatibility list: - MSI Radeon RX 6800 Gaming X Trio 16G, 16GB GDDR6, HDMI, 3x DP - MSI Radeon RX 6800 XT Gaming X Trio 16G, 16GB GDDR6, HDMI, 3x DP Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800/6800XT Gaming Trio X with Backplate Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800/6800XT Gaming Trio X with Backplate

The EK-Quantum Vector RE RTX 3080/3090 GPU cooler, has been further developed based on the 2nd generation Vector series and is compatible with most reference designs of RTX 3080/3090 graphics cards. The Vector RE water block directly cools the GPU, VRAM and VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The nickel-plated copper base is much thicker than previous Vector models. The top is made entirely of black durable POM acetal, which also includes the connection terminal. The end piece of the cooler has D-RGB lighting, with a total of 5 individually addressable LEDs, which makes the end piece shine pleasantly. The lighting is compatible with all common RGB Sync technologies of the major motherboard manufacturers, such as ASRock Polychrome Sync, ASUS Aura Sync, Gigabyte RGB Fusion and MSI Mystic Light. As the GPU cooler does not have a backplate, it is recommended to order a matching backplate (e.g. item 1020619). Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: (LxHxW) - 220x124x20.5mm Material: Nickel-Plated Copper, Acetal Threads: G1/4" D-RGB cable length: 500mm D-RGB LED count: 5 D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) Scope of Delivery: EK-Quantum Vector RTX RE 3080/3090 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility EMTEK GeForce RTX 3080 10GB Black Edition OC Gainward GeForce RTX 3080 Phoenix Gainward GeForce RTX 3080 Phoenix GS Gainward GeForce RTX 3090 Phoenix Gainward GeForce RTX 3090 Phoenix GS GALAX GeForce RTX 3080 SG (1-Click OC) (38NWM3MD99NN) GALAX GeForce RTX 3090 SG (1-Click OC) (39NSM5MD1GNA) KFA2 GeForce RTX 3080 SG (1-Click OC) (38NWM3MD99NK) KFA2 GeForce RTX 3080 SG 10GB (38NWM3MD99NK) KFA2 GeForce RTX 3090 SG (1-Click OC) (39NSM5MD1GNK) KUROUTOSHIKOU GeForce RTX 3090 24GB GALAKURO (GG-RTX3090-E24GB/TP) Palit GeForce RTX 3080 GamingPro (NED3080019IA-132AA) Palit GeForce RTX 3080 GamingPro OC (NED3080S19IA-132AA) Palit GeForce RTX 3090 GamingPro (NED3090019SB-132BA) Palit GeForce RTX 3090 GamingPro OC (NED3090S19SB-132BA) PNY GeForce RTX 3080 10GB XLR8 Gaming EPIC-X RGB Triple Fan Edition (VCG308010TFXPPB) PNY GeForce RTX 3090 24GB XLR8 Gaming EPIC-X RGB Triple Fan Edition (VCG309024TFXPPB) PNY GeForce RTX 3090 OC XLR8 Gaming Epic-X RGB Triple Fan Edition, 24GB GDDR6X, HDMI, 3x DP (VCG309024TFXMPB)

The Alphacool Aurora Plexi GPX-N RTX 3080/3090 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Plexi GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3080/3090 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3080/3090 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3080/3090 Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3080/3090 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3080/3090 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3080/3090 Plexi is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate - The Founders Edition, does NOT correspond to the Reference Design! Technical data: L x W x B: 152,5 x 266 x 24,6 mm Material cooler: Nickle plated copper Material top: Plexi Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Power connector Digital RGB: 3-Pin 5V (0,5A) Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards (Note: RTX 3090/3080 cards will be added after their release) Compatibility list: RTX 3080 ASUS ROG Strix GeForce RTX 3080, ROG-STRIX-RTX3080-10G-GAMING, 10GB GDDR6X, 2x HDMI, 3x DP (90YV0FA0-M0NM00) ASUS ROG Strix GeForce RTX 3080 OC, ROG-STRIX-RTX3080-O10G-GAMING, 10GB GDDR6X, 2x HDMI, 3x DP (90YV0FA1-M0NM00) RTX 3090 ASUS ROG Strix GeForce RTX 3090 OC, ROG-STRIX-RTX3090-O24G-GAMING, 24GB GDDR6X, 2x HDMI, 3x DP (90YV0F93-M0NM00) Download manual PDF: Alphacool Eisblock Aurora Plexi GPX-N RTX 3090/3080 ROG Strix with Backplate Download data sheet PDF: Alphacool Eisblock Aurora Plexi GPX-N RTX 3090/3080 ROG Strix with Backplate

The EK-Quantum Vector RE RTX 3080/3090 GPU cooler, has been further developed based on the 2nd generation Vector series and is compatible with most reference designs of RTX 3080/3090 graphics cards. The Vector RE water block directly cools the GPU, VRAM and VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The nickel-plated copper base is much thicker than previous Vector models. The top is made almost entirely of acrylic. The end piece of the cooler has D-RGB lighting, with a total of 5 individually addressable LEDs, which makes the interior shine pleasantly. The lighting is compatible with all common RGB Sync technologies of the major motherboard manufacturers, such as ASRock Polychrome Sync, ASUS Aura Sync, Gigabyte RGB Fusion and MSI Mystic Light. As the GPU cooler does not have a backplate, it is recommended to order a matching backplate (e.g. item 1020619). Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: (LxHxW) - 220x124x20.5mm Material: Nickel-Plated Copper, Acryl Threads: G1/4" D-RGB cable length: 500mm D-RGB LED count: 5 D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) Scope of Delivery: EK-Quantum Vector RE RTX 3080/3090 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility EMTEK GeForce RTX 3080 10GB Black Edition OC Gainward GeForce RTX 3080 Phoenix Gainward GeForce RTX 3080 Phoenix GS Gainward GeForce RTX 3090 Phoenix Gainward GeForce RTX 3090 Phoenix GS GALAX GeForce RTX 3080 SG (1-Click OC) (38NWM3MD99NN) Galax GALAX GeForce RTX 3090 SG (1-Click OC) (39NSM5MD1GNA) KFA2 GeForce RTX 3080 SG (1-Click OC) (38NWM3MD99NK) KFA2 GeForce RTX 3080 SG 10GB (38NWM3MD99NK) KFA2 GeForce RTX 3090 SG (1-Click OC) (39NSM5MD1GNK) KUROUTOSHIKOU GeForce RTX 3090 24GB GALAKURO (GG-RTX3090-E24GB/TP) Palit GeForce RTX 3080 GamingPro (NED3080019IA-132AA) Palit GeForce RTX 3080 GamingPro OC (NED3080S19IA-132AA) Palit GeForce RTX 3090 GamingPro (NED3090019SB-132BA) Palit GeForce RTX 3090 GamingPro OC (NED3090S19SB-132BA) PNY GeForce RTX 3080 10GB XLR8 Gaming EPIC-X RGB Triple Fan Edition (VCG308010TFXPPB)PNY GeForce RTX 3090 24GB XLR8 Gaming EPIC-X RGB Triple Fan Edition (VCG309024TFXPPB) PNY GeForce RTX 3090 OC XLR8 Gaming Epic-X RGB Triple Fan Edition, 24GB GDDR6X, HDMI, 3x DP (VCG309024TFXMPB)

The Alphacool Eisblock ES Acetal GPX-N RTX 3080/3090 was specially developed for the Alphacool Enterprise series. Over 17 years of experience has been incorporated into the development of this graphics card water block and it represents the current ethos of Alphacool product development. More performance! During the development of the Eisblock ES Acetal GPX-N RTX 3080/3090 graphics card waterblock, we naturally placed great emphasis on increasing performance. For the first step, the cooler was brought closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, the nickel-plated copper block was also made thinner. Instead of 7 mm, it is now only 5.5 mm thick. The water flow within the cooler was also optimized. All important components such as the voltage converters and the RAM are now cooled much better and more effectively by water. All this provides a significant increase in cooling performance. Connections to the rear? Server cases offer different dimensions than normal PC cases. To save space in width and height, the connections were moved to the back. Another advantage is that it is easier to connect the tubing of a complete server rack with this kind of positioning of the connections. This means that even quick-release fasteners with G1/4" external thread can be screwed directly to the graphics card as already offered by Alphacool. Copper or aluminum? Alphacool, of course, only uses copper in its water coolers. In the EisblockES Acetal GPX-N RTX 3080/3090 the copper is nickel-plated. However, compared to the previous models, Alphacool has improved the type of nickel plating once again. This has significantly increased the acid resistance and is intended to prevent nickel plating from flaking off. Why does Alphacool use copper instead of aluminum? Copper simply has almost twice the thermal conductivity of aluminum and is therefore clearly the better material for water cooling. Are these all new products? The graphics card water cooler Eisblock ES Acetal GPX-N RTX 3080/3090 also uses the new patented screw plugs, which are flush with the surface of the terminal. IN and OUT are now marked by small discreet triangles. They are easily recognizable and fit perfectly into the overall optical line of the graphics card water cooler. The Alphacool ES Acetal GPX-N RTX 3080/3090 Plexi is in every respect a complete further development of the previous Alphacool graphics card water cooler. No technical compromises were made, but the entire technical know-how was incorporated into the development and implementation. Note: - This cooler is delivered with a backplate! - The Founders Edition does NOT correspond to the Reference Design! Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards Compatibility list: RTX 3080 Zotac GAMING GeForce RTX 3080 Trinity (ZT-A30800D-10P) Zotac Gaming GeForce RTX 3080 Trinity OC (ZT-A30800J-10P) PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXMPB) PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXPPB) Inno3D GeForce RTX 3080 iChill X4 10240 MB GDDR6X (C30804-106XX-1810VA36) Inno3D GeForce RTX 3080 Twin X2 OC 10240 MB GDDR6X (N30802-106XX-1810VA34) Inno3D GeForce RTX 3080 iChill X3 10240 MB GDDR6X (C30803-106XX-1810VA37) Palit GeForce RTX™ 3080 GamingPro (NED30800191A-132AA) Palit GeForce RTX™ 3080 GamingPro OC (NED3080S191A-132AA) Galax GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI (38NWM3MD99NN) KFA2 GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI (38NWM3MD99NK) Gainward RTX 3080 Phoenix Gainward RTX 3080 Phoenix GS Galakuro NVIDIA GEFORCE RTX 3080 GG-RTX3080-E10GB/TP RTX 3090 PNY GeForce RTX 3090 XLR8 Gaming EPIC-X RGB, 24576 MB GDDR6X (VCG309024TFXPPB) Inno3D GeForce RTX 3090 iChill X3, 24576 MB GDDR6X (C30903-246XX-1880VA37) Inno3D GeForce RTX 3090 Gaming X3, 24576 MB GDDR6X (N30903-246X-1880VA37N) Inno3D GeForce RTX 3090 iChill X4, 24576 MB GDDR6X (C30904-246XX-1880VA36) Zotac GeForce RTX 3090 Trinity, 24576 MB GDDR6X (ZT-A30900D-10P) Palit GeForce RTX™ 3080 GamingPro (NED3090019SB-132BA) Palit GeForce RTX™ 3080 GamingPro OC (NED3090S19SB-132BA) Galax GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI/ (39NSM5MD1GNA) KFA2 GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI/ Gainward RTX 3090 Phoenix Gainward RTX 3090 Phoenix GS Galakuro NVIDIA GEFORCE RTX 3090 GG-RTX3090-E24GB/TP Download manual PDF: Coming soon... Download data sheet PDF: Alphacool Eisblock ES Acetal RTX 3080/3090 Reference with Backplate

The Alphacool Aurora Acryl GPX-N RTX 3070 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3070 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3070 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3070 Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3070 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3070 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3070 Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data: L x W x H: 133 x 220 x 24,5 mm Material cooler: Nickle-plated copper Material cooler top: Acryl Threads: 4 x G1/4“ Thickness cooling fins: 0,6 mm Illumination: Digital RGB LEDs Power connector Digital RGB LEDs: 3-Pin JST Power Digital RGB LEDs: 5V Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards Compatibility : - MSI GeForce RTX 3070 Ventus 2X OC, 8GB GDDR6, HDMI, 3x DP (V390-008R) - MSI GeForce RTX 3070 Ventus 3X OC, 8GB GDDR6, HDMI, 3x DP (V390-007R) - MSI GeForce RTX 3070 Ventus 2X, 8GB GDDR6, HDMI, 3x DP - MSI GeForce RTX 3070 Ventus 3X, 8GB GDDR6, HDMI, 3x DP Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 Ventus with Backplate Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 Ventus with Backplate

The EK-Quantum Vector Trio RTX 3080/3090 D-RGB GPU cooler, has been further developed based on the 2nd generation Vector series and designed for the MSI Trio and Suprim RTX 3080 and 3090 graphics cards. The Vector water block directly cools the GPU, the VRAM and the VRM (voltage regulation module), as the cooling liquid is routed directly over these critical areas. The base of the block is made of nickel-plated copper, while the top is made of acetal. Furthermore, the cooler has D-RGB lighting, with a total of 9 individually addressable LEDs, which makes the end piece shine pleasantly. The lighting is compatible with all common RGB sync technologies of the major motherboard manufacturers, such as ASRock Polychrome Sync, ASUS Aura Sync, Gigabyte RGB Fusion and MSI Mystic Light. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate. Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 320 x 157 x 20.5mm (L x H x W) Material: Nickel-Plated Copper, Acetal Threads: G1/4" Scope of Delivery: EK-Quantum Vector Trio RTX 3080/3090 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility MSI GeForce RTX 3080 Gaming Trio 10G MSI GeForce RTX 3080 Gaming X Trio 10G MSI GeForce RTX 3080 Suprim 10G MSI GeForce RTX 3080 Suprim X 10G MSI GeForce RTX 3090 Gaming Trio 24G MSI GeForce RTX 3090 Gaming X Trio 24G MSI GeForce RTX 3090 Suprim 24G MSI GeForce RTX 3090 Suprim X 24G

The Alphacool Aurora Acryl GPX-N RTX 3070 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3070 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3070 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3070 Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3070 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3070 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3070 Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data: L x W x H: 151 x 260 x 24,5 mm Material cooler: Nickle-plated copper Material cooler top: Acryl Threads: 4 x G1/4“ Thickness cooling fins: 0,6 mm Illumination: Digital RGB LEDs Power connector Digital RGB LEDs: 3-Pin JST Power Digital RGB LEDs: 5V Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards Kompatibilität: - MSI GeForce RTX 3070 Gaming X Trio, 8GB GDDR6, HDMI, 3x DP (V390-006R) Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 Gaming X Trio with Backplate Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 Gaming X Trio with Backplate

The HEATKILLER® V eBC backplate is a useful addition to the graphics card cooler of the HEATKILLER® V series. Mounted on the back of the graphics card, it improves cooling performance and increases mechanical stability. This is made possible by the use of solid black anodized aluminum. The optics are not neglected either. The backplate cools relevant components on the back of the board, including the GPU and voltage converter (VRM). Pre-cut thermal pads are included in the scope of delivery. Spacers (electrically insulating) attached to the back of the backplate ensure problem-free installation on the graphics card. The enclosed mounting material is optimized for use with a water cooler from the HEATKILLER® V series. Technical specifications: Material: anodized aluminum Dimensions: (L x W x H): Weight: 150g Compatibility: Nvidia Geforce RTX 3080 Nvidia Geforce RTX 3090 Scope of delivery: 1x HEATKILLER® V eBC - Backplate for RTX 3080/3090 - Black 1x mounting material

The Alphacool Aurora Acryl GPX-N RTX 3070 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3070 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3070 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3070 Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3070 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3070 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3070 Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data: L x W x H:128 x 185 x 24,5 mm Material cooler: Nickle-plated copper Material cooler top: Acryl Threads: 4 x G1/4“ Thickness cooling fins: 0,6 mm Illumination: Digital RGB LEDs Power connector Digital RGB LEDs: 3-Pin JST Power Digital RGB LEDs: 5V Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards Compatibility : - Zotac Gaming GeForce RTX 3070 Twin Edge OC, 8GB GDDR6, HDMI, 3x DP (ZT-A30700H-10P) - Zotac Gaming GeForce RTX 3070 Twin Edge, 8GB GDDR6, HDMI, 3x DP (ZT-A30700E-10P) Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 Gaming Twin Edge with Backplate Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 Gaming Twin Edge with Backplate

The EK-Quantum Vector FTW3 RTX 3080/3090 D-RGB GPU cooler, has been further developed based on the 2nd generation Vector series and designed for the EVGA FTW3 RTX 3080 and 3090 graphics cards. The Vector water block directly cools the GPU, VRAM and VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The base of the block is made of nickel-plated copper, while the top is made of acrylic. Furthermore, the cooler has D-RGB lighting, with a total of 9 individually addressable LEDs, which makes the interior shine pleasantly. The lighting is compatible with all common RGB sync technologies of the major motherboard manufacturers, such as ASRock Polychrome Sync, ASUS Aura Sync, Gigabyte RGB Fusion and MSI Mystic Light. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate. Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 314 x 155 x 20.5mm (L x H x W) Material: Nickel-Plated Copper, Acryl Threads: G1/4" Scope of Delivery: EK-Quantum Vector FTW3 RTX 3080/3090 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility EVGA GeForce RTX 3080 FTW3 Gaming (10G-P5-3895-KR) EVGA GeForce RTX 3080 FTW3 Ultra Gaming (10G-P5-3897-KR) EVGA GeForce RTX 3080 FTW3 Ultra Hybrid Gaming (10G-P5-3898-KR) EVGA GeForce RTX 3080 FTW3 Ultra Hydro Copper Gaming (10G-P5-3899-KR) EVGA GeForce RTX 3090 FTW3 Gaming (24G-P5-3985-KR) EVGA GeForce RTX 3090 FTW3 Ultra Gaming (24G-P5-3987-KR) EVGA GeForce RTX 3090 FTW3 Ultra Hybrid Gaming (24G-P5-3988-KR) EVGA GeForce RTX 3090 FTW3 Ultra Hydro Copper Gaming (24G-P5-3989-KR)

The Alphacool Aurora Acryl GPX-A 6800(XT) Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-A 6800(XT) graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-A 6800(XT) cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-A 6800(XT) Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-A 6800(XT) Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-A 6800(XT) also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-A 6800(XT) Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate Technical data: L x W x B: 130 x 262,5 x 24,5 mm Material cooler: Nickle plated copper Material top: Acryl Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Power connector Digital RGB: 3-Pin 5V (0,5A) Graphics Card Configurator: Click here! List of Compatibility: AMD graphic cards Compatibility list: - AMD Radeon 6800 Reference Design - AMD Radeon 6800 XT Reference Design - AMD Radeon 6900 XT Reference Design More compatible models will follow in this list for this cooler. We are currently checking other PCB designs from various manufacturers! Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800/6800XT/6900XT Reference with Backplate Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800/6800XT/6900XT Reference with Backplate

Output voltage: 20 Output current (max): 6.75 Power supply output current: 135 Plug: Slim tip+pin (square USB) In box: Velcro to organize the cable Power cable Compatible with: Lenovo 700-17ISK Lenovo 700-17ISK 80RV Lenovo IdeaPad Y700 Lenovo IdeaPad Y700 Touch 80NW Lenovo IdeaPad Y700-14 ISK Lenovo IdeaPad Y700-14 ISK 80NU Lenovo IdeaPad Y700-14iSK Lenovo IdeaPad Y700-15 ISK Lenovo IdeaPad Y700-15 ISK 80NV Lenovo IdeaPad Y700-15 ISK Touch Lenovo IdeaPad Y700-15ACZ Lenovo IdeaPad Y700-15ACZ 80NY Lenovo IdeaPad Y700-15iSK Lenovo IdeaPad Y700-15iSK Lenovo IdeaPad Y700-17 ISK Lenovo IdeaPad Y700-17 ISK 80Q0 Lenovo IdeaPad Y700-17iSK Lenovo IdeaPad Z710 Lenovo IdeaPad Z710 80AK Lenovo ThinkPad E560p Lenovo ThinkPad E560p 20G5 Lenovo ThinkPad T440p Lenovo ThinkPad T440p 20AN Lenovo ThinkPad T440p 20AW Lenovo ThinkPad T460p Lenovo ThinkPad T460p 20FW Lenovo ThinkPad T460p 20FX Lenovo ThinkPad T540p Lenovo ThinkPad T540p 20BE Lenovo ThinkPad T540p 20BF Lenovo ThinkPad W540 Lenovo ThinkPad W540 20BG Lenovo ThinkPad W540 20BH Lenovo ThinkPad W541 Lenovo ThinkPad W541 20EF Lenovo ThinkPad W541 20EG Lenovo Y50-70 Lenovo Y50-70 80DT Lenovo Y50-70 80EJ Lenovo Y50-70 AM-IFI Lenovo Y50-70 AM-ISE Lenovo Y50-70 AS-ISE Lenovo Y50-70 AT-IFI Lenovo Y50-70 IFI Lenovo Y50-70 ISE Lenovo Y50p Lenovo Y50p-70 Lenovo Y50p-70-IFI Lenovo Y50p-70-ISE Lenovo Y70 Lenovo Y70-70 Lenovo Y70-70 Touch Lenovo Y70-70 Touch 80DU Lenovo Y70-80 Other features: Security: Surge protection Overload Short-circuit Thermal

The Alphacool Aurora Acryl RADEON RX 6800/6900(XT) Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora RADEON RX 6800/6900(XT) graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora RADEON RX 6800/6900(XT) cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora RADEON RX 6800/6900(XT) Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora RADEON RX 6800/6900(XT) Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora RADEON RX 6800/6900(XT) also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora RADEON RX 6800/6900(XT) Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data: L x W x H: 152 x 277 x 23 mm Material cooler: Vernickeltes Kupfer Material cooler top: Acryl Threads: 4 x G1/4“ Thickness of cooling fins: 0,6 mm Illumination: Digital RGB LEDs Power connector Digital RGB LEDs: 3-Pin JST Power Digital RGB LEDs: 5V Graphics Card Configurator: Click here! List of Compatibility: AMD graphic cards Compatibility: - ASUS ROG Strix Radeon RX 6800 XT OC, ROG-STRIX-RX6800XT-O16G-GAMING, 16GB GDDR6, HDMI, 3x DP - ASUS ROG Strix Radeon RX 6800 OC, ROG-STRIX-RX6800-O16G-GAMING, 16GB GDDR6, HDMI, 3x DP - ASUS TUF Gaming Radeon RX 6800 XT OC, TUF-RX6800XT-O16G-GAMING, 16GB GDDR6, HDMI, 3x DP - ASUS TUF Gaming Radeon RX 6800 OC, TUF-RX6800-O16G-GAMING, 16GB GDDR6, HDMI, 3x DP Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800/6800XT Strix/TUF mit Backplate Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800/6800XT Strix/TUF mit Backplate

Output voltage: 20 Output current (max): 3.25 Power supply output current: 65 Plug: Square tip In box: Adapter Velcro to organize cable Power cable Compatible with: ThinkPadX1 Carbon 3444-54U ThinkPadX1 Carbon 3444-53U ThinkPadX1 Carbon 3444-52U ThinkPadX1 Carbon 3444-4ZU ThinkPadX1 Carbon 3444-2KU ThinkPad X1 Carbon 3444-2HU ThinkPadX1 Carbon 3444-2GU ThinkPadX1 Carbon 3444-2DU ThinkPadX1 Carbon 3444-28U ThinkPadX1 Carbon 3444-25U ThinkPadX1 Carbon 3448-3AU ThinkPadX1 Carbon 3448-39U ThinkPadX1 Carbon 3448-34U ThinkPadX1 Carbon 3448-2MU ThinkPadX1 Carbon 3448-35U ThinkPadX1 Carbon 3448-25U ThinkPadX1 Carbon 3448-24U ThinkPadX1 Carbon 3448-23U ThinkPadX1 Carbon 3448-22U ThinkPadX1 Carbon 3460-37U ThinkPadX1 Carbon 3460-36U ThinkPadX1 Carbon 3460-35U ThinkPadX1 Carbon 3460-34U ThinkPadX1 Carbon 3460-25U ThinkPadX1 Carbon 3460-24U ThinkPadX1 Carbon 3460-23U ThinkPadX1 Carbon 3460-22U LenovoThinkPad X1 Carbon win 8 ThinkPadX1 Carbon 3444-BFU ThinkPadX1 Carbon 3444-BEU ThinkPadX1 Carbon 3444-BDU ThinkPadX1 Carbon 3444-BCU ThinkPadX1 Carbon 3444-B9U ThinkPadX1 Carbon 3444-B8U ThinkPadX1 Carbon 3444-B7U ThinkPadX1 Carbon 3444-AZU ThinkPadX1 Carbon 3444-59 ThinkPadX1 Carbon 3444-55U ThinkPadX1 Carbon 3444-FGU ThinkPadX1 Carbon 3444-FFU ThinkPadX1 Carbon 3444-FEU ThinkPadX1 Carbon 3444-FDU ThinkPadX1 Carbon 3444-FCU ThinkPadX1 Carbon 3444-FBU ThinkPadX1 Carbon 3444-FAU ThinkPadX1 Carbon 3444-F9U ThinkPadX1 Carbon 3444-F8U ThinkPadX1 Carbon 3444-F7U ThinkPadX1 Carbon 3444-BBU ThinkPadX1 Carbon 3444-BAU ThinkPadX1 Carbon 3444-AWU ThinkPadX1 Carbon 3444-5AU ThinkPadX1 Carbon 3444-56U ThinkPadX1 Carbon 3448-5DU ThinkPadX1 Carbon 3448-5CU ThinkPad X1 Carbon 3448-5BU ThinkPadX1 Carbon 3448-5AU ThinkPadX1 Carbon 3448-59U ThinkPadX1 Carbon 3448-58U ThinkPadX1 Carbon 3448-95U ThinkPadX1 Carbon 3448-94U ThinkPadX1 Carbon 3448-AYU ThinkPadX1 Carbon 3448-AXU ThinkPadX1 Carbon 3448-AWU ThinkPadX1 Carbon 3448-AVU ThinkPadX1 Carbon 3460-5CU ThinkPadX1 Carbon 3460-5DU ThinkPadX1 Carbon 3460-5BU ThinkPadX1 Carbon 3460-5AU ThinkPadX1 Carbon 3460-59U ThinkPadX1 Carbon 3460-58U ThinkPadX1 Carbon 3460-B2U ThinkPadX1 Carbon 3460-AZU ThinkPadX1 Carbon 3460-AYU ThinkPadX1 Carbon 3460-AXU ThinkPadX1 Carbon 3460-AWU ThinkPadX1 Carbon 3460-AVU Other features: Input voltage: AC 220V - 240V Frequency: 50 - 60 Hz Surge protection Overload protection Short-circuit protection Thermal protection

The Alphacool Aurora Plexi GPX-N RTX 3080 FE Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Plexi GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3080 FE graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3080 FE cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3080 FE Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3080 FE Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3080 FE also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3080 FE Plexi is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate - The Founders Edition, does NOT correspond to the Reference Design! Technical data: L x W x B: 121,5 x 204,5 x 28,5 mm Material cooler: Nickle plated copper Material top: Plexi Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Power connector Digital RGB: 3-Pin 5V (0,5A) Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards (Note: RTX 3090/3080 cards will be added after their release) Compatibility list: - NVIDIA GeForce 3080 Founders Edition Download manual PDF: Alphacool Eisblock Aurora Plexi GPX-N RTX 3080 Founders Edition with Backplate Download data sheet PDF: Alphacool Eisblock Aurora Plexi GPX-N RTX 3080 Founders Edition with Backplate

Thermaltake's Pure A14 is a PWM controlled LED fan available in four different colours: blue, green, red and white. Especially radiators benefit from the very quiet operation and low heat generation thanks to the self-lubricating hydraulic bearing. The anti-vibration pads also ensure low noise levels. As the sealing cap prevents the lubricant from escaping, a long service life is also guaranteed. The nine LEDs of the fan impress with a uniform brightness and high colour intensity and give the PC system the final touch. Technical Data: LED colour: White Dimenson: 140 x 140 x 25 mm Interface: 4-Pin PWM Fan Stated Voltage: 9.0 V Fan Rated Voltage: 12 V Rated current: 0.27 A Power Input: 3.24 W Fan Speed: 500 - 1500 rpm Max. Air Pressure: 2.05 mm-H2O Max Air Flow: 93.15 CFM Noise: 32 dB-A Bearing Type: Hydraulic Bearing Life Expectation: 40,000 hrs, 25℃ Weight: 176 g

The Alphacool Aurora Acryl GPX-N RTX 3080/3090 FTW3 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3080/3090 FTW3 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3080/3090 FTW3 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3080/3090 FTW3 Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3080/3090 FTW3 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3080/3090 FTW3 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3080/3090 FTW3 Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate Technical data: L x W x B: 151 x 290 x 24,5 mm Material cooler: Nickle plated copper Material top: Acryl Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards Compatibility list: - EVGA GeForce RTX 3080 FTW3 Ultra Gaming, 10GB GDDR6X, HDMI, 3x DP (10G-P5-3897-KR) - EVGA GeForce RTX 3080 FTW3 Gaming, 10GB GDDR6X, HDMI, 3x DP (10G-P5-3895-KR) - EVGA GeForce RTX 3090 FTW3 Ultra Gaming, 24GB GDDR6X, HDMI, 3x DP (24G-P5-3987-KR) - EVGA GeForce RTX 3090 FTW3 Gaming, 24GB GDDR6X, HDMI, 3x DP (24G-P5-3985-KR)GD) Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 FTW3 with Backplate Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 FTW3 with Backplate