Otsing: thermal pad (arhiveeritud tooted)
893 toodet
Alphacool Eisschicht Light thermal pad - 7W/mK 14x14x1mm Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht. The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component. Download data sheet PDF: Alphacool Eisschicht Light thermal pad 7W/mK 14x14x1mm | 0 | Vaata | |||
 Alphacool Eisschicht Ultra Soft thermal pad 3W/mk 50x50x3mm The Alphacool Ultra soft Eisschicht is the next step in terms of thermal pads. Due to their outstanding properties, they can almost be compared directly to thermal paste. This is because the Ultra Soft Eisschicht moulds itself and clings much better to components, which contributes to excellent cooling performance. Better than standard thermal pads? The material of the Ultra Soft thermal pads acts similar to a thermal paste. While normal thermal pads are only pressed together by the contact pressure there can be areas that are uneven due to different high components, making them less effective. With the ultra soft Eisschicht this problem doesn’t exist because the material distributes itself similar to thermal paste and thus prevents the highest components from being subjected to increased contact pressure by the cooler. As standard thermal pads are quite stiff they can also cause too much pressure on components. In the worst cases, this can cause the PCB to bend and even break. Due to the soft consistency of the Ultra Soft Eisschicht any excess material can spread out rather than cause problems. The Ultra Soft Eisschicht is not only performance orientated, but also safer! But this is not the only advantage! Moreover, the special material cannot dry out. Usually the silicone in thermal pads bleeds out over time. This makes them hard and the performance of the pads drops rapidly from a certain point. This is not the case with the Ultra Soft Eisschicht. They can be used over a much longer period of time without significantly losing performance. A thermal pad with fabric? The consistency of the heat conducting material is similar to a viscous heat conducting paste. A special fabric is embedded so that the material remains stable and can be used as a thermal pad. This ensures a perfect distribution of the material if the element to be cooled has an uneven shape. Examples include voltage transformers, VRam and similar electronic components of all kinds that require cooling. Cutting? No problem! To cut the thermal pads to size, you should definitely leave the foil on the pads. So the pads can easily be cut to size with a pair of scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. The Alphacool Eisschicht Ultra Soft Thermal Pads are superior to the usual thermal pads in many respects and are also used with all new Eisblock Aurora graphic cards coolers from Alphacool. Download data sheet PDF: Alphacool Eisschicht Ultra Soft thermal pad 3W/mk 50x50x3mm | 0 | Vaata | |||
 Alphacool Eisblock ES Acetal GPX-N Quadro RTX A6000 with Backplate The Alphacool Eisblock ES Acetal GPX-N Quadro RTX A600 was specially developed for the Alphacool Enterprise series. The full-cover cooler with aluminium backplate cools the GPU and all important components such as voltage converters and the graphics memory directly with water. Connections to the rear? Server cases offer different dimensions than normal PC cases. To save space in width and height, the connections were moved to the back. Another advantage is that it is easier to connect the tubing of a complete server rack with this kind of positioning of the connections. This means that even quick-release fasteners with G1/4" external thread can be screwed directly to the graphics card as already offered by Alphacool. More performance! During the development of the Eisblock ES Acetal GPX-N Quadro RTX A600 graphics card waterblock, we naturally placed great emphasis on increasing performance. For the first step, the cooler was brought closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, the nickel-plated copper block was also made thinner. Instead of 7 mm, it is now only 5.5 mm thick. The water flow within the cooler was also optimized. All important components such as the voltage converters and the RAM are now cooled much better and more effectively by water. All this provides a significant increase in cooling performance. Copper or aluminum? Alphacool, of course, only uses copper in its water coolers. In the Eisblock ES Acetal GPX-N Quadro RTX A600 the copper is nickel-plated. However, compared to the previous models, Alphacool has improved the type of nickel plating once again. This has significantly increased the acid resistance and is intended to prevent nickel plating from flaking off. Why does Alphacool use copper instead of aluminum? Copper simply has almost twice the thermal conductivity of aluminum and is therefore clearly the better material for water cooling. Technical data cooler L x W x H 232 x 97,35 x 19 mm Material cooler Nickle-plated copper Material cooler top acetal, brass Threads 2 x G1/4“ Thickness cooling fins 0,6 mm Technical data backplate L x W x H 177,07 x 97,35 x 6 mm Material aluminium Color Black Compatibility list: - PNY RTX A6000, 48GB GDDR6, 4x DP (VCNRTXA6000-PB / VCNRTXA6000-BSP) Downloads: Datasheet PDF | Manual PDF | Nvidia List of Compatibility PDF Links: Graphics Card Configurator | 0 | Vaata | |||
 Alphacool Eisblock ES Acetal GPX-N RTX 3080/3090 Turbo with Backplate The Alphacool Eisblock ES Acetal GPX-N RTX 3080/3090 Turbo was specially developed for the Alphacool Enterprise series. The full-cover cooler with aluminium backplate cools the GPU and all important components such as voltage converters and the graphics memory directly with water. Connections to the top? Server cases offer different dimensions than normal PC cases. To save space in width and height, the connections were moved to the top. Another advantage is that it is easier to connect the tubing of a complete server rack with this kind of positioning of the connections. This means that even quick-release fasteners with G1/4" external thread can be screwed directly to the graphics card as already offered by Alphacool. More performance! During the development of the Eisblock ES Acetal GPX-N RTX 3080/3090 Turbo graphics card waterblock, we naturally placed great emphasis on increasing performance. For the first step, the cooler was brought closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, the nickel-plated copper block was also made thinner. Instead of 7 mm, it is now only 5.5 mm thick. The water flow within the cooler was also optimized. All important components such as the voltage converters and the RAM are now cooled much better and more effectively by water. All this provides a significant increase in cooling performance. Copper or aluminum? Alphacool, of course, only uses copper in its water coolers. In the Eisblock ES Acetal GPX-N RTX 3080/3090 Turbo the copper is nickel-plated. However, compared to the previous models, Alphacool has improved the type of nickel plating once again. This has significantly increased the acid resistance and is intended to prevent nickel plating from flaking off. Why does Alphacool use copper instead of aluminum? Copper simply has almost twice the thermal conductivity of aluminum and is therefore clearly the better material for water cooling. Technical data cooler L x W x H 266,7 x 97,90 x 14,75 mm Material cooler Nickle-plated copper Material cooler top acetal Threads 2 x G1/4“ Thickness cooling fins 0,6 mm Technical data backplate L x W x H 266,7 x 97,6 x 6 mm Material aluminium Color Black Compatibility list: - ASUS Turbo GeForce RTX 3090 (90YV0FK0-M0NB00) - ASUS Turbo GeForce RTX 3080 10GB (TURBO-RTX3080-10G) - ASUS Turbo GeForce RTX 3080 V2 10GB (TURBO-RTX3080-10G-V2) Downloads: Datasheet PDF | Manual PDF | Nvidia List of Compatibility PDF Links: Graphics Card Configurator | 0 | Vaata | |||
 Alphacool Laing DDC310 - Complete Edition Eisdecke - plata/Acryl Alphacool's new Laing Low Noise Edition for absolute silence! The well-known Laing DDC pumps are getting a new addition. Though freshly packaged, this pump can begin its life with lots of self-confidence. A few details have been changed. First, we held back a little in performance in order to solve a widespread problem: the volume! Few other pumps can match this one in terms of reducing noise generation from water. For the most up-to-date water cooling systems with CPU and GPU cooling, this pump should be the first choice. Unlike before, this pump does not come in the familiar plastic casing. It has an all-new perfectly tailored brass case gracing its exterior. This new case ensures a longer lifespan for the pump. Air flows through the cooling fins, then over an interior thermal pad directly to the pump board. Another feature is the included decoupling option. With the special M4 screws, the included decoupling can be screwed into the head of the screws and then attached to the case. The innovation in this set is that it uses the V.2 of the Alphacool "Eisdecken", which provides you the options of three G1/4" connections for the inlet and two G1/4" connections for the outlet. Inlet options: front, side, top Outlet options: front, top The scope of delivery also includes three G1/4" screw plugs for sealing the unused in/out connection ports. Another feature is the pre-installed brackets, as seen before on the new "Eisbecher". This allows the pump set to be mounted directly onto the case bottom. Now available as a combo with the tried and tested Alphacool Eisdecke Laing DDC Plexi or Acetal Top! Technical Details: Dimensions: 89 x 85 x 75mm Colour: silver / plexi Power consumption: 10W Material: brass, stainless steel, aluminium oxide, hard carbon, plexiglass Maximum head: 2.44m Maximum system temperature: 60°C Maximum flow rate: 200L/h Voltage: 12V DC Electrical connection: 4 pin Molex Speed sensor: 3 pin Molex Scope of Delivery: 1x Alphacool Laing DDC310 pump 1x Alphacool Laing DDC metal bottom - silver 1x Alphacool Eisdecke Laing DDC plexi top V.2 Decoupling set Mounting material Technical data sheet for DDC310 pump: Please click here! Manual Download 3D-file (.stp) | 0 | Vaata | |||
 Alphacool VGA Cooler NexXxoS GPX - GTX 1060 M07 - incl. backplate - black Alphacool is making great strides with the new NexXxoS GPX coolers! This new cooling concept offers optimal performance and quality at a reasonable price! Function The GPU is actively cooled through the ingenious new injection technology. All the other chips are sufficiently cooled through the passive cooler in which the GPU water cooler is enclosed. Cross Slot Structure The cross slot technology in the base plate, patented in 2004 and used in the Alphacool NexXxoS XP, has been developed further. The fins and channel structure have been refined. The remaining panes are 0.5 x 0.5mm in size and 2.5mm tall. This enables a very large and fast rate of heat transfer from the copper to the coolant. SLI Operation Through the outside-facing inlet and outlet, this cooler can be used in SLI configurations with little difficulty. This way, up to four graphics cards can be connected with the Alphacool GPX SLI Connector. Backplate Every cooler now includes a backplate which uses little passive cooling fins to cool the graphics card again, as well as giving the graphics card a finished appearance and protecting it at the same time. Cooling fins Passive cooling happens through perfectly balanced, barely 18mm deep cooling fins, which completely cover the remaining parts of the graphics card. Light air circulation in the case means this cooler is in no way inferior to conventional coolers. Graphics card not included Compatibility MSI GeForce GTX 1060 6GB Armor 6G OCV1, 6GB GDDR5, DVI, 2x HDMI, 2x DisplayPort (V328-023R) Scope of Delivery 1x Graphics card cooler 1x Backplate Thermal pads Thermal paste Assembly materials Configurator for VGA cooler Installation manual available for download here Compatibility list Nvidia | 0 | Vaata | |||
 Alphacool HDX - Optane SSD900P - Acryl The world renowned manufacturer Alphacool presents the new HDX Intel Optane SSD 900P water cooler. With this cooler, you can ensure that your Intel Optane SSD 900P always offers the maximum possible performance without any throttling caused by heat. All SSDs can get extremely warm under permanent load and at a certain temperature, the SSD clocks down which in turn can cause a huge performance loss in transfer rates. With active water cooling you can significantly lower temperatures and as with the pre-assembled passive cooler, throttling due to high temperatures can no longer occur. Another benefit to the Alphacool HDX Intel Optane 900P water cooler is that it can prolonge the SSDs lifetime. Because the service life of electronic components is directly related to the temperatures. The warmer an electronic component becomes, the shorter its life is. Water cooling keeps temperatures at a much lower level, thus extending the lifetime. Aesthetically, the Alphacool HDX Intel Optane 900P cooler with its Plexifix creates a real feature and looks great as it allows you to directly observe the water flowing in the cooler. Technical Datas Dimensions (LxWxH): 166 x 79 x 15 mm Materials: nickeled copper, plexi Scope of Delivery 1x Alphacool HDX - Intel® Optane SSD900P - Plexi Thermal pads Thermal paste 5x mounting screws | 0 | Vaata | |||
 Alphacool NexXxoS RXP-1 RAM-Cooler Black (DDR1/DDR2/DDR3) - G1/4 Alphacool’s first RAM water block for a high-end water cooling loop! In a water cooling system, when completely eliminating the fans in the enclosure, the RAM modules should not be forgotten about. Especially when the air flow is completely coming to a standstill in the enclosure, the stock heatspreaders barely help any more in reducing the temperature. An active solution is needed! The most effective solution is the integration of the RAM modules into a water cooling loop. For this the Alphacool developers thought up a simple, but very effective solution. The great feature of this design is that the memory modules are cooled individually! This allows the cooling modules to be placed spaced apart. The water block is shipped with two thermal pads and is designed for double-sided memory modules, which have memory ICs on both sides. With the help of additional thermal pads, optionally available at our webshop, single-sided modules can also be cooled. For mounting three small screws at the side have to be loosened. Next remove the protective foil from the thermal pad and insert the RAM module with the thermal pad into the water block. Then prepare the second pad, put it on and fixate the cooler, done! Now the module can be inserted into the memory slot with the water block. Optically this memory cooler is perfect for a matching design in the system with the glossy Alphacool copper finish. Technical specifications: Material: Copper , threads in brass Color: black nickel Compatibility: DDR, DDR2, DDR3, DDR-4 Dimensions (L x H x W): 125 x 46 x 18mm Connection thread: ¼“ Weight: 233g Extent of delivery: 1x Kühler 2x Wärmeleitpads Download 3D-file (.stp) | 0 | Vaata | |||
| |||||
 Alphacool VGA Cooler NexXxoS GPX - Nvidia Geforce GTX 1080 M03 - incl. backplate - black With the new NexXxoS GPX coolers Alphacool is again a step ahead! Optimum performance and quality in a new cooling design for a great price! A new sophisticated injection system means the GPU is actively cooled. All other chips are sufficiently cooled by the passive cooler which is also in contact with the watercooling block for extra efficiency. The patented technology “Philips structure” from the Alpha NexXxoS XP in 2004, was further developed improving the base plate. The Fins and channel structure has been further refined. The fins are now 0.5 x 0.5 mm and 2.5 mm high. This enables a very large and rapid heat transfer from the copper to the coolant. SLI mode: The inlet and outlet are positioned of easy use in SLI mode. Up to four graphics cards can also be connected with the Alphacool GPX SLI connector. Back plate: The GPX range always Includes a back plate which uses small passive fins to cool rear of the graphics card. Cooling fins: The passive front plate cooling uses 18mm deep cooling fins that cover the rest of the graphics card completely. Graphics card not included Compatible: Palit GeForce GTX 1080 Super JetStream, 8GB GDDR5X, DVI, HDMI, 3x DisplayPort (NEB1080S15P2J) Gainward GeForce GTX 1070 Phoenix 8GB GDDR5 (3699) Gainward GeForce GTX 1070 Phoenix GLH 8GB GDDR5 (3675) Gainward GeForce GTX 1070 Phoenix Golden Sample 8GB GDDR5 (3682) Palit GeForce GTX 1070 Gamerock + G-Panel 8GB GDDR5 (NE51070T15P2GP) Palit GeForce GTX 1070 Gamerock 8GB GDDR5 (NE51070T15P2G) Palit GeForce GTX 1070 Gamerock Premium 8GB GDDR5 (NE51070H15P2G) Palit GeForce GTX 1070 JetStream 8GB GDDR5 (NE51070015P2J) Palit GeForce GTX 1070 Super JetStream 8GB GDDR5 (NE51070S15P2J) Gainward GeForce GTX 1080 Phoenix 8GB GDDR5X (3651) Gainward GeForce GTX 1080 Phoenix GLH 8GB GDDR5X (3668) Gainward GeForce GTX 1080 Phoenix Golden Sample 8GB GDDR5X (3644) Palit GeForce GTX 1080 GameRock + G-Panel 8GB GDDR5X (NEB1080T15P2GP) Palit GeForce GTX 1080 GameRock 8GB GDDR5X (NEB1080T15P2G) Palit GeForce GTX 1080 GameRock Premium + G-Panel 8GB GDDR5X (NEB1080H15P2GP) Palit GeForce GTX 1080 GameRock Premium 8GB GDDR5X (NEB1080H15P2G) Palit GeForce GTX 1080 JetStream 8GB GDDR5X (NEB1080015P2J) Palit GeForce GTX 1080 Super JetStream 8GB GDDR5X (NEB1080S15P2J) Scope of delivery: 1x VGA cooler 1x Back plate Thermal pads Thermal Compound mounting material configurator for VGA cooler. The installation manual can be downloaded here compatibility list Nvidia | 0 | Vaata | |||
Alphacool Rise Ultra Soft thermal pad 7W/mk 100x100x0,5mm The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance. Better than standard thermal pads? The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component. But that is not the only advantage! The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance. Cutting to size? No problem! When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical data L x W x H 100 x 100 x 0,5 mm Colour Grey Specific Gravitiy ASTM D792 3,3 g/cc Thermal Conductivity ASTM D5470 7.0 W/mK Hardness ASTM 2240 25 Shore OO Useful Temperature -40 to +160 °C Volume Resistivity ASTM D257 5,2x10 13 Ohm-m Dielectric Constant ASTM D150 4,5 MHz Dielectric Breakdown Voltage ASTM D149 5,5 kV/mm Flame Rating UL E331100 UL94 V0 Weight 18 g Download Datasheet PDF: Alphacool Rise Ultra Soft thermal pad 7W/mk 100x100x0,5mm | 0 | Vaata | |||
Alphacool Rise Ultra Soft thermal pad 7W/mk 100x100x1mm The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance. Better than standard thermal pads? The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component. But that is not the only advantage! The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance. Cutting to size? No problem! When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical data L x W x H 100 x 100 x 1 mm Colour Grey Specific Gravitiy ASTM D792 3,3 g/cc Thermal Conductivity ASTM D5470 7.0 W/mK Hardness ASTM 2240 25 Shore OO Useful Temperature -40 to +160 °C Volume Resistivity ASTM D257 5,2x10 13 Ohm-m Dielectric Constant ASTM D150 4,5 MHz Dielectric Breakdown Voltage ASTM D149 5,5 kV/mm Flame Rating UL E331100 UL94 V0 Weight 40 g Download Datasheet PDF: Alphacool Rise Ultra Soft thermal pad 7W/mk 100x100x1mm | 0 | Vaata | |||
Alphacool Rise Ultra Soft thermal pad 7W/mk 50x50x3mm The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance. Better than standard thermal pads? The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component. But that is not the only advantage! The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance. Cutting to size? No problem! When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical data L x W x H 50 x 50 x 3 mm Colour Grey Specific Gravitiy ASTM D792 3,3 g/cc Thermal Conductivity ASTM D5470 7.0 W/mK Hardness ASTM 2240 25 Shore OO Useful Temperature -40 to +160 °C Volume Resistivity ASTM D257 5,2x10 13 Ohm-m Dielectric Constant ASTM D150 4,5 MHz Dielectric Breakdown Voltage ASTM D149 5,5 kV/mm Flame Rating UL E331100 UL94 V0 Weight 28 g Download Datasheet PDF: Alphacool Rise Ultra Soft thermal pad 7W/mk 50x50x3mm | 0 | Vaata | |||
Alphacool Rise Ultra Soft thermal pad 7W/mk 50x50x2mm The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance. Better than standard thermal pads? The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component. But that is not the only advantage! The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance. Cutting to size? No problem! When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical data L x W x H 50 x 50 x 2 mm Colour Grey Specific Gravitiy ASTM D792 3,3 g/cc Thermal Conductivity ASTM D5470 7.0 W/mK Hardness ASTM 2240 25 Shore OO Useful Temperature -40 to +160 °C Volume Resistivity ASTM D257 5,2x10 13 Ohm-m Dielectric Constant ASTM D150 4,5 MHz Dielectric Breakdown Voltage ASTM D149 5,5 kV/mm Flame Rating UL E331100 UL94 V0 Weight 19 g Download Datasheet PDF: Alphacool Rise Ultra Soft thermal pad 7W/mk 50x50x2mm | 0 | Vaata | |||
Aquacomputer backplate for kryographics NEXT RTX 3080, active XCS The backplate, made of solid aluminium, is the matching counterpart for the kryographics NEXT 3080 water cooler from Aqua Computer. The stability is enormously improved, especially around the voltage regulator area. The black anodised backplate has an optimal heat dissipation, thanks to the heat pipe connected to the water circuit. All that is needed is to remove the connection terminal from the graphics card cooler. Important: Delivery without graphics card and without kryographics water cooler! Technical Data: Back plate: Aluminum, anodized Heatpipe: Copper, nickel plated Fixing plate (heatpipe): Stainless steel Connection terminal: Acetal Scope of Delivery: One back plate One heatpipe One connection terminal Thermal conductive pads mounting material | 0 | Vaata | |||
Aquacomputer backplate for kryographics NEXT RTX 3090, passive This back plate is manufactured from massive aluminum and can be mounted in addition to a kryographics NEXT RTX 3090 water block, giving additional stability especially in the voltage regulator area of the graphics card. Additionally, the RAM modules on the back of the graphics card are cooled effectively. The back plate is anodized in black color. Scope of delivery: One Back plate Thermal conductive pads Mounting material Please note: Graphics card and kryographics water block are not included in delivery, please order separately. | 0 | Vaata | |||
Aquacomputer backplate for kryographics NEXT RTX 3080 Strix / RTX 3090 Strix, passive This back plate is manufactured from massive aluminum and can be mounted in addition to a kryographics NEXT RTX 3080 Strix / RTX 3090 Strix water block, giving additional stability especially in the voltage regulator area of the graphics card. Additionally, the RAM modules on the back of the RTX 3090 Strix graphics card are cooled effectively. The back plate is anodized in black color. Scope of delivery: One Back plate Thermal conductive pads Mounting material Compatibility: Please check compatibility using the PDF from Aqua Computer under Awards and Documents. Please note: Graphics card and kryographics water block are not included in delivery, please order separately. | 0 | Vaata | |||
Aquacomputer Backplate for kryographics NEXT RX 6800 / RX 6900, passive This back plate is manufactured from massive aluminum and can be mounted in addition to a kryographics NEXT RX 6800 / RX 6900 water block, giving additional stability especially in the voltage regulator area of the graphics card. The back plate is anodized in black color. Scope of delivery: One Back plate Thermal conductive pads Mounting material Please note: Graphics card and kryographics water block are not included in delivery, please order separately. | 0 | Vaata | |||
 Aquacomputer kryoM.2 PCIe 3.0/4.0 x4 adapter for M.2 NGFF PCIe SSD, M-Key with water block The kryoM.2 is a PCIe 4x adapter for M.2/M-Key NGFF PCIe SSD and is compatible with the form factors 2280, 2260 and 2242. The adapter uses a multilayer PCB with gold surface where the individual layers are connected to each other to optimize the thermal management. The SSD is installed with a thermal pad which already allows a better cooling over regular adapters. The water block covers the front side of the SSD with a second thermal pad and ensures maximum performance of high speed SSDs. The connector terminal of the water block is the same as used for the kryographics blocks. This allows using kryoconnect adapter kits to connect several blocks directly with each other. To ensure a good quality and reliability the connector for the M.2 SSD comes from Amphenol, the PCIe contacts are plated with hard gold and the circuit paths are impedance controlled. Dimensions ca. 152 x 84 x 20 mm incl. bracket Scope of delivery: Adapter board Water block, G1/4 connection threads Mounting material | 0 | Vaata | |||
Aquacomputer Frame kryographics NEXT RTX 3080 / TRX 3090 nickel-plated version The kryographics NEXT RTX 3080 / 3090 from Aqua Computer, is a complete graphics card cooler for the reference design of the Nvidia RTX 3080 or RTX 3090. The cooler base is made of nickel-plated copper and is in contact with all the components of the graphics card to be cooled. In addition, the cooler has a stainless steel jetplate for excellent cooling performance and wide channels for low flow resistance. The cooler is rounded off by its attractive acrylic glass cover, which reveals the view of the cooling liquid, in contrast to the black frame, made of anodised aluminium. The appearance is even more impressive when the 15 addressable RGBpx LEDs illuminate the interior and the outer edge. For this purpose, the kryographics NEXT must be connected to an Aqua Computer device with RGBpx output or a mainboard with compatible output. Important: Delivery without graphics card. The cooler is delivered without connectors, please order suitable connectors separately. Technical Data: Material: Nickel-Plated Copper Material Cover: Acrylic Glas, Aluminium (anodized) Jet plate: Stainless Steel Terminal: Acetal Scope of Delivery: Water block without hose connectors (threads G1/4) Two G1/4 sealing screws Thermal compound Thermal Grizzly Kryonaut, approx. 0.5 grams in syringe Plastic spatula Thermally conductive pad Mounting material RGBpx connection cable 50 cm RGBpx adapter | 0 | Vaata | |||
Aquacomputer kryographics NEXT RTX 3080 Extended / RTX 3090 Extended Full cover water block for NVIDIA RTX 3080 and RTX 3090 graphics cards according to reference design with wider PCB dimensions. Manufactured from a massive block of copper, the base of the water block covers all relevant heat sources. In the GPU area, a jet plate made from stainless steel assures maximum cooling performance, while wide coolant channels in other areas guarantee minimum flow resistance. The top is manufactured from acrylic glass, reinforced by a black anodized aluminum frame. Fifteen individually addressable RGBpx LEDs are integrated into the water block and can be connected to an Aqua Computer device with RGBpx output or to a motherboard with a compatible output. The kryographics NEXT series retains established features of the kryographics series: Mirror finish for relevant contact areas. Direct contact to GPU and RAM, high quality thermal pad included for further components such as voltage regulators. All mounting threads are equipped with metal spacers for easy installation. Inlet and outlets ports with G1/4 thread, can be used from both sides. Two sealing screws included. Interchangeable connection terminal. Full compatibility to kryographics connection terminals with VISION module and kryoconnect SLI connectors. Compatible products for integrated RGBpx illumination: All Aqua Computer products with RGBpx output Various motherboards with connector for addressable RGB LEDs Materials: Base part: Copper Top cover: Acrylic glass Frame: Aluminum, anodized Jet plate: Stainless steel Terminal: Acetal Scope of delivery: Water block without hose connectors (threads G1/4) Two G1/4 sealing screws Thermal compound Thermal Grizzly Kryonaut, approx. 1 gram in syringe Plastic spatula Thermally conductive pad Mounting material RGBpx connection cable 50 cm RGBpx adapter Compatibility: Please check compatibility using the PDF from Aqua Computer under Awards and Documents. Please note: Graphics card and fittings are not included in delivery, please order separately. | 0 | Vaata | |||
Aquacomputer kryographics NEXT RTX 3080 Extended / RTX 3090 Extended vernickelte Ausführung Full cover water block for NVIDIA RTX 3080 and RTX 3090 graphics cards according to reference design with wider PCB dimensions. Manufactured from a massive block of copper, the base of the water block covers all relevant heat sources. In the GPU area, a jet plate made from stainless steel assures maximum cooling performance, while wide coolant channels in other areas guarantee minimum flow resistance. The top is manufactured from acrylic glass, reinforced by a black anodized aluminum frame. Fifteen individually addressable RGBpx LEDs are integrated into the water block and can be connected to an Aqua Computer device with RGBpx output or to a motherboard with a compatible output. The kryographics NEXT series retains established features of the kryographics series: Mirror finish for relevant contact areas. Direct contact to GPU and RAM, high quality thermal pad included for further components such as voltage regulators. All mounting threads are equipped with metal spacers for easy installation. Inlet and outlets ports with G1/4 thread, can be used from both sides. Two sealing screws included. Interchangeable connection terminal. Full compatibility to kryographics connection terminals with VISION module and kryoconnect SLI connectors. Compatible products for integrated RGBpx illumination: All Aqua Computer products with RGBpx output Various motherboards with connector for addressable RGB LEDs Materials: Base part: Copper, nickel plated Top cover: Acrylic glass Frame: Aluminum, anodized Jet plate: Stainless steel Terminal: Acetal Scope of delivery: Water block without hose connectors (threads G1/4) Two G1/4 sealing screws Thermal compound Thermal Grizzly Kryonaut, approx. 1 gram in syringe Plastic spatula Thermally conductive pad Mounting material RGBpx connection cable 50 cm RGBpx adapter Compatibility: Please check compatibility using the PDF from Aqua Computer under Awards and Documents. Please note: Graphics card and fittings are not included in delivery, please order separately. | 0 | Vaata | |||
Aquacomputer backplate for kryographics NEXT RTX 3080 Extended / RTX 3090 Extended, active XCS This back plate is manufactured from massive aluminum and can be mounted in addition to a kryographics NEXT RTX 3080 Extended / RTX 3090 Extended water block, giving additional stability especially in the voltage regulator area of the graphics card. The back plate is anodized in black color. For optimum heat dissipation, the back plate is connected to the water cooling system by a heatpipe. The back plate comes with a connection terminal that replaces the terminal originally installed to the kryographics water block. Materials: Back plate: Aluminum, anodized Heatpipe: Copper, nickel plated Fixing plate (heatpipe): Stainless steel Connection terminal: Acetal Scope of delivery: One back plate One heatpipe One connection terminal Thermal conductive pads mounting material Compatibility: Please check compatibility using the PDF from Aqua Computer under Awards and Documents. Please note: Graphics card and kryographics water block are not included in delivery, please order separately. | 0 | Vaata | |||
 EK Water Blocks EK-Quantum Vector FTW3 RTX 3080/3090 Backplate - Black GTIN: 3831109833001 Jahutid ja lisad The EK-Quantum Vector FTW3 RTX 3080/3090 backplate is intended for the EK-Quantum Vector FTW3 RTX 3080/3090 graphics card cooler of the same name. A backplate is particularly suitable for giving the graphics card more stability. As the backplate is kept very simple, it is rounded off by a small but elegant EK logo. Technical Data Material: Aluminium Color: Black Scope of Delivery EK-Quantum Vector FTW3 RTX 3080/3090 Backplate - Black Mounting mechanism (the backplate screws are on the other side - separate compartment) Thermal pads | 0 | Vaata | |||
 EK Water Blocks EK-Quantum Momentum ROG Maximus XIII Hero D-RGB - Acetal EK-Quantum Momentum ROG XIII Hero - Acetal is the new Quantum Line monoblock specifically engineered for the ROG® Maximus XIII Hero – an Intel® Z590 chipset-based motherboard. Featuring the latest generation Velocity cooling engine with low restriction and high performance, this monoblock is boasting a stealthy black design that plays great with accent LED lighting on the ROG Maximus XIII Hero motherboard. EK® Momentum series monoblocks utilize the 5th generation of the award-winning EK® CPU water block cooling engine, further tweaked for performance and optimal coolant flow! This water block directly cools Intel® 1200 socket-type CPU, as well as the power regulation (MOSFET) module. Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks. Like with every EK monoblock, the EK-Quantum Momentum ROG Maximus XIII Hero features a high flow design and it can be easily used with the system using a weaker water pump or lower pump speed settings as well. The Momentum monoblock also comes with sophisticated addressable D-RGB lightning which connects to a 3-pin ADD_Gen2 header on the motherboard. The purest nickel-plated copper available on the market is used for the cold plate which is precisely machined to a dense micro-fin structure. The nickel-plated brass screw-in standoffs are pre-installed and allow for easy installation. The top of the monoblock features a CNC machined black POM acetal top piece. The new cooling engine is characterized by the top-integrated jet nozzle which is combined with a thicker jet plate allowing a more precise bow control. The simplified water block structure offers a more optimized coolant flow and easier maintenance, while the jet plate ensures the best contact surface for the CPU. Unlike other solutions on the market, this is a true one-piece, sturdy and reliable liquid cooling product that requires only two connector fittings for proper operation. The enclosed thermal pad is used on voltage regulator modules to improve stability, performance, and prolong the lifespan of the motherboard. For the CPU, please use the enclosed (electrically non-conductive) thermal grease EK-TIM Ectotherm. Technical Data Material: Nickel, Acetal Threads: G1/4" Intel Socket: 1200 Enclosed EK-Quantum Momentum ROG Maximus XIII Hero Monoblock Mounting mechanism Thermal grease EK-TIM Ectotherm Thermal pads | 0 | Vaata | |||
 Aquatuning thermal pad 30x30x1,5mm (1 piece) These thermal pads are very useful to compensate height differences and other irregularities on coolers and surfaces that are to be cooled. Due to the very elastic adaptability and the low hardness of this pad only little contact pressure is needed to allow perfect adaptation to the surfaces to ensure the best possible heat transfer. With these pads almost any unevenness can be compensated, from microscopically small grooves to visible irregularities. The self-adhesive surface of these pads allow easy installation and prevents the pad from shifting during installation of the cooler. These pads can be cut to any desired size and are therefore suitable for just about any application: From VRAM coolers on graphics cards to VRM blocks on the motherboard. Even large components such as the North- or Southbridge can be equipped with these pads, as they have excellent heat conductivity. With their many uses, these thermal pads should be amongst any PC-builder's equipment. Technical data: Dimensions: 30x30x1,5mm Heat conductivity: 1,5 W/mK Maximum bridgeable gap: 1mm Electrically non-conductive Extent of delivery: 1x thermal pad 30x30x1,5mm (1 piece) Note: The thermal pads can be compressed to up to half of their height. | 0 | Vaata | |||
 Phobya Thermal pad Ultra 5W/mk 100x100x5mm (1 piece) These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 100x100x5mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 5 mm electrically non-conductive Extent of delivery: 1x Thermal pad 100x100x5mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen | 0 | Vaata | |||
 Watercool HEATKILLER® MB-X KIT MAXIMUS VIII RANGER/HERO/GENE - ACETAL Water blocks from the HEATKILLER® MB-X series are focused on performance. They are designed for the specific mainboard and therefore, they are not modular like products of our HEATKILLER® SW-X series. On the plus side, they offer superior cooling performance for the demanding customer while producing very little restriction (High Flow). The water block enhances the mechanical stability of the mainboard while granting superior overclocking potential. Another key feature of the HEATKILLER® MB-X series are isolating spacers. They isolate the water block from the mainboard electrically, while granting easy mounting. Tilting or wobbling of the water block are also ruled out by them. Only high grade materials are used for the HEATKILLER® MB-X series. The cold plate is made from 99,9% pure electrolytic copper. The top is made from high quality industrial plastic. You can choose between black ACETAL (POM) or transparent ACRYL (original PLEXIGLAS). Integration in the water loop is provided via two G1/4 threads. Pre cut thermal pads are within the scope of deliver, as is the mounting material. No additional thermal compound is needed. Technical Data: Material: Nickel plated electrolytic copper, ACETAL, stainless steel Dimensions: (L x W x H): 126 x 116 x 23,5 mm Weight: ca. 150g Pressure tested: 2 bar Sealing: NBR70 Threads: G1/4 inch (DIN ISO 228-1) Included: 1x HEATKILLER® MB-X KIT ASUS MAXIMUS VIII RANGER/HERO/GENE - ACETAL 1x Mounting kit 1x thermal pads 1x Manual | 0 | Vaata | |||
 Watercool HEATKILLER® IV eBC - Backplate for GTX 1080, 1070 and Titan X (Pascal) The HEATKILLER® IV eBC backplate is a useful addition for the HEATKILLER® IV VGA water blocks. Mounted on the backside of the graphic card, it improves the cooling performance while also granting mechanical stability. This is due to the construction out of massive black anodized aluminium. Even more, it also just looks good. The backplate cools relevant components on the PCB’s backside. These are GPU, memory blocks (VRAM) or voltage regulation (VRM). Precut thermal pads are included in the scope of delivery. Attention: For cooling the memory blocks which are present on the backside of GTX TITAN X cards separately sold thermal pads are available. Recesses in the backplate offer compatibility to mainboards with extremely wide IO ports. The stepping near the RAM slots offers ample distance to the memory modules. Isolating spacers on the backside of the backplate ensure easy installation. The enclosed mounting material is optimized for usage with HEATKILLER® IV water blocks. The backplate can be used with water blocks of other manufacturers. Specialized mounting material might be needed though. This is not part of the delivery scope. Technical data: Material: Anodized aluminum Dimensions (L x W x H): 265 x 98 x 4,5mm Weight: 250g Compatible to: Nvidia GTX 1080 Founders Edition (reference PCB) Compatible to: Nvidia GTX 1070 Founders Edition (reference PCB) Scope of delivery: 1x HEATKILLER® IV eBC – Backplate for GTX 1080 and 1070 1x Mounting material | 0 | Vaata | |||
Watercool HEATKILLER® V eBC - Backplate for RTX 3080/3090 - Black The HEATKILLER® V eBC backplate is a useful addition to the graphics card cooler of the HEATKILLER® V series. Mounted on the back of the graphics card, it improves cooling performance and increases mechanical stability. This is made possible by the use of solid black anodized aluminum. The optics are not neglected either. The backplate cools relevant components on the back of the board, including the GPU and voltage converter (VRM). Pre-cut thermal pads are included in the scope of delivery. Spacers (electrically insulating) attached to the back of the backplate ensure problem-free installation on the graphics card. The enclosed mounting material is optimized for use with a water cooler from the HEATKILLER® V series. Technical specifications: Material: anodized aluminum Dimensions: (L x W x H): Weight: 150g Compatibility: Nvidia Geforce RTX 3080 Nvidia Geforce RTX 3090 Scope of delivery: 1x HEATKILLER® V eBC - Backplate for RTX 3080/3090 - Black 1x mounting material | 0 | Vaata | |||
Watercool HEATKILLER® V eBC - Backplate for RTX 3080/3090 - nickel The HEATKILLER® V eBC backplate is a useful addition to the graphics card cooler of the HEATKILLER® V series. Mounted on the back of the graphics card, it improves cooling performance and increases mechanical stability. This is made possible by the use of solid black anodized aluminum. The optics are not neglected either. The backplate cools relevant components on the back of the board, including the GPU and voltage converter (VRM). Pre-cut thermal pads are included in the scope of delivery. Spacers (electrically insulating) attached to the back of the backplate ensure problem-free installation on the graphics card. The enclosed mounting material is optimized for use with a water cooler from the HEATKILLER® V series. Technical specifications: Material: anodized aluminum Dimensions: (L x W x H): Weight: 150g Compatible to: NVIDIA Geforce RTX 3080 NVIDIA Geforce RTX 3090 Scope of delivery: 1x HEATKILLER® V eBC - Backplate for RTX 3080/3090 - Black 1x mounting material | 0 | Vaata | |||
 Thermaltake Pure A12 LED Blue / Single Pack Thermaltake's Pure A12 is a PWM controlled LED fan that comes in four different colours: blue, green, red and white. Especially radiators benefit from the very quiet operation and low heat generation thanks to the self-lubricating hydraulic bearing. The anti-vibration pads also ensure low noise levels. As the sealing cap prevents the lubricant from escaping, a long service life is also guaranteed. The nine LEDs of the fan impress with a uniform brightness and high colour intensity and give the PC system the final touch. Technical Data: LED colour: Blue Dimenson: 120 x 120 x 25 mm Interface: 4-Pin PWM Fan Stated Voltage: 9.0 V Fan Rated Voltage: 12 V Rated current: 0.15 A Power Input: 1.8 W Fan Speed: 500 - 1500 rpm Max. Air Pressure: 1.59 mm-H2O Max Air Flow: 56.45 CFM Noise: 25.8 dB-A Bearing Type: Hydraulic Bearing Life Expectation: 40,000 hrs, 25℃ Weight: 156 g | 0 | Vaata | |||
 Korpus ICY BOX IB-M2HSF-702 Heat pipe heat sink IB-M2HSF-702 Product kirjeldus: RaidSonic ICY BOX IB-M2HSF-702 - solid state drive cooler Product Type: Solid state drive cooler Package Content: Screws, backplate, kruvikeeraja, 2 thermal pads pinge Required: DC 12 V Product Material: High-grade aluminium mõõtmed (WxDxH): 7.5 cm x 2.4 cm x 5.2 cm kaal: 83 g värv: Silver | 0 | Vaata | |||
 EK Water Blocks EK-Quantum Vector FE RTX 3070 D-RGB - Nickel + Acryl GTIN: 3831109832240 Jahutid ja lisad The EK Quantum Vector RE RTX 3070 from EK is a complete cooler for the Founders Edition of the RTX 3070 from Nvidia. The high-quality workmanship and the nickel-plated copper material used for the heat sink are striking. The nickel-plated copper covers all important areas of the graphics card, such as GPU, memory and voltage converter. The optimised channel structure results in very efficient and reliable cooling. Visually, the cooler is rounded off with a transparent acrylic glass lid and a black decorative strip. The integrated RGB lighting sets the scene perfectly for the EK Quantum. In addition, the cooler has four G1/4" connections, which, however, are found on the short side instead of on the upper long side as usual. The graphics card cooler is compatible with the common RGB synchronisation technologies of all major motherboard manufacturers. Technical Data Dimensions: 205 x 98 x 21 mm Material Base: Nickel-Plated Copper Material Cover: Acryl Thread: 4x G1/4" D-RGB cable length: 500mm D-RGB LED count: 5 D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) Compatibility NVIDIA GeForce RTX 3070 (Founders Edition) Scope of Delivery EK-Quantum Vector RE RTX 3070 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) | 0 | Vaata | |||
 EK Water Blocks EK-Quantum Vector FTW3 RTX 3080/3090 Active Backplate D-RGB - Acryl EK-Quantum Vector FTW3 RTX 3080/3090 Active Backplate D-RGB - Acryl is a cutting-edge addition to the EK® Quantum Line. It is made to complement the existing EK-Quantum Vector FTW3 RTX 3080/3090 water blocks and actively cool the backside of all EVGA® GeForce RTX™ 3080 and 3090 FTW3 GPU. EK-Quantum Vector FTW3 RTX 3080/3090 Active Backplate The EK-Quantum Vector FTW3 RTX 3080/3090 Active Backplate comes with a new terminal that replaces the stock terminal arriving with the Vector water block and links the water block and Vector Active Backplate into a single unit. This way, the whole enclosure requires only one inlet and one outlet, removing unnecessary additional tubing and reducing clutter. It is the ultimate aesthetic and performance solution that finds your GPU sandwiched between two water blocks, allowing maximum cooling. The Vector Active Backplate directly cools the PCB hotspots that are found on the backside of the GPU core and the VRM (voltage regulation module). On the RX 3090, the VRAM located on the backside is cooled, while the RTX 3080 gets cooling for the PCB located around the front-mounted VRAM. Cooling liquid is channeled over all these critical areas. These newly developed active backplates feature a fin array with 8 wide channels allowing for very low flow restriction. This in turn allows overall lower temperatures, while the active backplate gets more than sufficient surface area for heat transfer. The base of the active backplate is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. The rest of the backplate is made of nickel-plated aluminum and it does not come in contact with the liquid. These Vector Active Backplates also feature acrylic terminals that match the top cover. The watertight sealing is ensured by high-quality EPDM O-rings. D-RGB lighting on EK-Quantum Vector FTW3 RTX 3080/3090 Active Backplate D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. This water block boasts a total of 8 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Technical Specification Dimensions: (LxHxW) - 303x151x37.8mm D-RGB cable length: 500mm D-RGB LED count: 8 D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) Enclosed EK-Quantum Vector FTW3 RTX 3080/3090 Active Backplate D-RGB - Acryl Necessary mounting screws, nuts, and washers 1x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Warning: EK only guarantees compatibility with included EK-brand thermal pads. Installation process, cooling performance and block contacts are tested exclusively with EK-brand thermal pads. Listed thermal pad thicknesses apply only to EK thermal pads which are included in the package. EK does not guarantee compatibility with aftermarket alternatives for thermal interface material. | 0 | Vaata | |||
 EK Water Blocks EK-Quantum Vector Trinity RTX 3080/3090 aktive Backplate - schwarz GTIN: 3831109836323 Jahutid ja lisad EK-Quantum Vector Trinity RTX 3080/3090 Active Backplate - Acetal is a cutting-edge addition to the EK® Quantum Line. It is made to complement the existing EK-Quantum Vector Trinity RTX 3080/3090 water blocks and actively cool the backside of all ZOTAC® GeForce RTX™ 3080 and 3090 Trinity GPU. EK-Quantum Vector Trinity RTX 3080/3090 Active Backplate EK-Quantum Vector Trinity RTX 3080/3090 active backplate links the water block and the active backplate part with a new terminal, which replaces the stock terminal coming with your water block. This way the whole enclosure requires only one inlet and one outlet, removing any unneeded additional tubing and reducing clutter. It is the ultimate aesthetic and performance solution that finds your GPU sandwiched between two water blocks allowing maximum cooling. The Vector Active Backplate directly cools the PCB hotspots that are found on the backside of the GPU core and the VRM (voltage regulation module). On the RX 3090, the VRAM located on the backside is cooled, while the RTX 3080 gets cooling for the PCB located around the front-mounted VRAM. Cooling liquid is channeled over all these critical areas. These newly developed active backplates feature a fin array with 6 wide channels allowing for very low flow restriction. This in turn allows overall lower temperatures, while the active backplate gets more than sufficient surface area for heat transfer. The base of this stealthy active backplate is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined out of durable Black POM acetal. The rest of the backplate is made of anodized aluminum and it does not come in contact with the liquid. These Vector Active Backplates also feature acetal terminals that match the top cover. The watertight sealing is ensured by high-quality EPDM O-rings. Technical Specification Dimensions: (LxHxW) - 233x124x15mm Enclosed: EK-Quantum Vector Trinity RTX 3080/3090 Active Backplate - Acetal Necessary mounting screws, nuts, and washers 1x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Warning: EK only guarantees compatibility with included EK-brand thermal pads. Installation process, cooling performance and block contacts are tested exclusively with EK-brand thermal pads. Listed thermal pad thicknesses apply only to EK thermal pads which are included in the package. EK does not guarantee compatibility with aftermarket alternatives for thermal interface material. | 0 | Vaata | |||
 EK Water Blocks EK-Quantum Vector Nitro+ RX 6800XT/6900XT Backplate - schwarz GTIN: 3831109844311 Jahutid ja lisad EK-Quantum Vector N+ RX 6800XT/6900XT Backplate - Black is a CNC machined retention backplate made from black anodized aluminum, that fits all EK-Quantum Vector N+ RX 6800XT/6900XT water blocks. The backplate covers the whole length of the graphics card's PCB, serves as an aesthetic add-on, and also provides passive cooling for the backside of the voltage regulation module (VRM), VRAM, and the GPU core. Enclosed EK-Quantum Vector N+ RX 6800XT/6900XT Backplate - Black Mounting mechanism (the backplate screws are on the other side - separate compartment) Thermal pads | 0 | Vaata | |||
 EK Water Blocks EK-Quantum Vector Master RX 6800XT/6900XT Backplate - schwarz GTIN: 3831109836910 Jahutid ja lisad EK-Quantum Vector Master RX 6800XT/6900XT Backplate - Black is a CNC machined retention backplate made from black anodized aluminum, that fits all EK-Quantum Vector Master RX 6800XT/6900XT water blocks. The backplate covers the whole length of the graphics card's PCB, serves as an aesthetic add-on, and also provides passive cooling for the backside of the voltage regulation module (VRM), VRAM, and the GPU core. Enclosed EK-Quantum Vector RX Master 6800XT/6900XT Backplate - Black Mounting mechanism (the backplate screws are on the other side - separate compartment)* Thermal pads | 0 | Vaata | |||
 EK Water Blocks EK-Quantum Vector Master RX 6800XT/6900XT D-RGB - Nickel + Acryl EK-Quantum Vector Master RX 6800XT/6900XT - Nickel + Acryl is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for AORUS Master 6800XT and 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector Master RX 6800XT/6900XT water block for AORUS Master RX 6800 XT and 6900 XT GPUs EK-Quantum Vector Master RX 6800XT/6900XT water block is compatible with AORUS Master Radeon RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Master Vector RX 6800XT/6900XT D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 7 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the Master 6800XT/6900XT water block EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 303,5x135,5x16,5mm Enclosed EK-Quantum Vector Master RX 6800XT/6900XT series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) | 0 | Vaata | |||
 EK Water Blocks EK-Quantum Vector Master RX 6800XT/6900XT Backplate - Nickel GTIN: 3831109836927 Jahutid ja lisad EK-Quantum Vector Master RX 6800XT/6900XT Backplate - Nickel is a CNC machined retention backplate made from nickel-plated aluminum, that fits all EK-Quantum Vector Master RX 6800XT/6900XT water blocks. The backplate covers the whole length of the graphics card's PCB, serves as an aesthetic add-on, and also provides passive cooling for the backside of the voltage regulation module (VRM), VRAM, and the GPU core. Enclosed EK-Quantum Vector RX Master 6800XT/6900XT Backplate - Nickel Mounting mechanism (the backplate screws are on the other side - separate compartment)* Thermal pads | 0 | Vaata | |||
 EK Water Blocks EK-Quantum Vector Master RX 6800XT/6900XT D-RGB - Nickel + Acetal EK-Quantum Vector Master RX 6800XT/6900XT - Nickel + Acetal is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for AORUS Master 6800XT and 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector Master RX 6800XT/6900XT water block for AORUS Master RX 6800 XT and 6900 XT GPUs EK-Quantum Vector Master RX 6800XT/6900XT water block is compatible with AORUS Master Radeon RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of stealthy black POM Acetal. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Master Vector RX 6800XT/6900XT D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 7 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the Master 6800XT/6900XT water block EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 303,5x135,5x16,5mm Enclosed EK-Quantum Vector Master RX 6800XT/6900XT series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) | 0 | Vaata | |||
 EK Water Blocks EK-Quantum Vector TUF RTX 3080/3090 Active Backplate - Acetal GTIN: 3831109849743 Jahutid ja lisad EK-Quantum Vector TUF RTX 3080/3090 Active Backplate - Acetal is a cutting-edge addition to the EK® Quantum Line. It is made to complement the existing EK-Quantum Vector TUF RTX 3080/3090 water blocks and actively cool the backside of all ASUS® GeForce RTX™ 3080 and 3090 TUF GPU. EK-Quantum Vector TUF RTX 3080/3090 Active Backplate The EK-Quantum Vector TUF RTX 3080/3090 Active Backplate comes with a new terminal that replaces the stock terminal arriving with the Vector water block and links the water block and Vector Active Backplate into a single unit. This way, the whole enclosure requires only one inlet and one outlet, removing unnecessary additional tubing and reducing clutter. It is the ultimate aesthetic and performance solution that finds your GPU sandwiched between two water blocks, allowing maximum cooling. The Vector Active Backplate directly cools the PCB hotspots that are found on the backside of the GPU core and the VRM (voltage regulation module). On the RX 3090, the VRAM located on the backside is cooled, while the RTX 3080 gets cooling for the PCB located around the front-mounted VRAM. Cooling liquid is channeled over all these critical areas. These newly developed active backplates feature a fin array with 7 wide channels allowing for very low flow restriction. This in turn allows overall lower temperatures, while the active backplate gets more than sufficient surface area for heat transfer. The base of the active backplate is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined out of durable black POM acetal. The rest of the backplate is made of nickel-plated aluminum and it does not come in contact with the liquid. These Vector Active Backplates also feature acrylic terminals that match the top cover. The watertight sealing is ensured by high-quality EPDM O-rings. Technical Specification Dimensions: (LxHxW) - 254,5x144x5x33,5mm Enclosed EK-Quantum Vector TUF RTX 3080/3090 Active Backplate - Acetal Necessary mounting screws, nuts, and washers 1x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Warning: EK only guarantees compatibility with included EK-brand thermal pads. Installation process, cooling performance and block contacts are tested exclusively with EK-brand thermal pads. Listed thermal pad thicknesses apply only to EK thermal pads which are included in the package. EK does not guarantee compatibility with aftermarket alternatives for thermal interface material. | 0 | Vaata | |||
 EK Water Blocks EK-Quantum Vector TUF RX 6800/6900 Backplate - schwarz GTIN: 3831109836835 Jahutid ja lisad EK-Quantum Vector TUF RX 6800/6900 Backplate - Black is a CNC machined retention backplate made from black anodized aluminum, that fits all EK-Quantum Vector TUF RX 6800/6900 water blocks. The backplate covers the whole length of the graphics card's PCB, serves as an aesthetic add-on, and also provides passive cooling for the backside of the voltage regulation module (VRM), VRAM, and the GPU core. Enclosed EK-Quantum Vector RX TUF 6800/6900 Backplate - Black Mounting mechanism (the backplate screws are on the other side - separate compartment) Thermal pads | 0 | Vaata | |||
 EK Water Blocks EK-Quantum Vector TUF RX 6800/6900 D-RGB - Nickel + Acryl GTIN: 3831109836811 Jahutid ja lisad EK-Quantum Vector TUF RX 6800/6900 is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for ASUS TUF RX 6800, 6800XT, 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector TUF RX 6800/6900 water block for ASUS TUF GAMING RX 6800 and 6900 GPUs EK-Quantum Vector RX 6800/6900 water block is compatible with ASUS TUF GAMING Radeon RX 6800, RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum TUF Vector RX 6800/6900 D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 9 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the TUF 6800/6900 water block EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 300x158x16.5mm Enclosed EK-Quantum Vector TUF RX 6800/6900 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) | 0 | Vaata | |||
 EK Water Blocks EK-Quantum Vector Xtreme RTX 3080/3090 D-RGB - Nickel + Acryl GTIN: 3831109833025 Jahutid ja lisad This is the 2nd generation Vector GPU water block from the EK® Quantum Line, designed for AORUS® Xtreme and Master RTX 3080 and 3090 graphics cards based on the latest NVIDIA® Ampere™ architecture. An EK water block for Xtreme and Master RTX 3080 and 3090 EK-Quantum Vector Xtreme 3080/3090 D-RGB - Nickel + Acryl water block is compatible with Aorus Xtreme and Master RTX 3080 and RTX 3090 graphics cards. The Vector water block actively cools the GPU, VRAM (on the front), power stages, and chokes in the VRM (voltage regulation module). These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of nickel-plated high-grade copper, while its top is CNC-machined out of glass-like cast Acrylic. These 2nd generation Vector GPU water blocks also feature Acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Vector Xtreme RTX 3080/3090 D-RGB water block The aesthetic corner end-piece is housing the addressable D-RGB LEDs. This water block boasts a total of 8 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the EK-Quantum Vector Xtreme 3080/3090 water block EK recommends the purchase of a retention backplate, especially for the 3090 models of graphics cards. The backplate improves the overall aesthetics of your graphics cards and also provides additional passive cooling for the GPU core, VRAM on the 3090 cards, and backside of the printed circuit board VRM section. Technical Specification Dimensions: (LxHxW) - 295x150.5x20.5mm Enclosed EK-Quantum Vector Xtreme RTX 3080/3090 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) | 0 | Vaata | |||
 EK Water Blocks EK-Quantum Vector Xtreme RTX 3080/3090 Backplate - Black GTIN: 3831109833049 Jahutid ja lisad EK-Quantum Vector Xtreme RTX 3080/3090 Backplate - Black is a CNC machined retention backplate made from black anodized aluminum, that fits all EK-Quantum Vector Xtreme RTX 3080/3090 water blocks. The backplate covers the whole length of the graphics card's PCB, serves as an aesthetic add-on, and also provides passive cooling for the backside of the voltage regulation module (VRM), the GPU core, and rear-mounted VRAM on the 3090 cards. Enclosed EK-Quantum Vector Xtreme RTX 3080/3090 Backplate - Black Mounting mechanism (the backplate screws are on the other side - separate compartment)* Thermal pads | 0 | Vaata | |||
 EK Water Blocks EK-Quantum Vector Trinity RTX 3080/3090 Active Backplate D-RGB - Acryl EK-Quantum Vector Trinity RTX 3080/3090 Active Backplate D-RGB - Acryl is a cutting-edge addition to the EK® Quantum Line. It is made to complement the existing EK-Quantum Vector Trinity RTX 3080/3090 water blocks and actively cool the backside of all ZOTAC® GeForce RTX™ 3080 and 3090 Trinity GPU. EK-Quantum Vector Trinity RTX 3080/3090 Active Backplate EK-Quantum Vector Trinity RTX 3080/3090 active backplate links the water block and the active backplate part with a new terminal, which replaces the stock terminal coming with your water block. This way the whole enclosure requires only one inlet and one outlet, removing any unneeded additional tubing and reducing clutter. It is the ultimate aesthetic and performance solution that finds your GPU sandwiched between two water blocks allowing maximum cooling. The Vector Active Backplate directly cools the PCB hotspots that are found on the backside of the GPU core and the VRM (voltage regulation module). On the RX 3090, the VRAM located on the backside is cooled, while the RTX 3080 gets cooling for the PCB located around the front-mounted VRAM. Cooling liquid is channeled over all these critical areas. These newly developed active backplates feature a fin array with 6 wide channels allowing for very low flow restriction. This in turn allows overall lower temperatures, while the active backplate gets more than sufficient surface area for heat transfer. The base of the active backplate is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. The rest of the backplate is made of nickel-plated aluminum and it does not come in contact with the liquid. These Vector Active Backplates also feature acrylic terminals that match the top cover. The watertight sealing is ensured by high-quality EPDM O-rings. D-RGB lighting on EK-Quantum Vector Trinity RTX 3080/3090 Active Backplate D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. This water block boasts a total of 8 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Technical Specification Dimensions: (LxHxW) - 231x124x15mm D-RGB cable length: 500mm D-RGB LED count: 8 D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) Enclosed EK-Quantum Vector Trinity RTX 3080/3090 Active Backplate D-RGB - Acryl Necessary mounting screws, nuts, and washers 1x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Warning: EK only guarantees compatibility with included EK-brand thermal pads. Installation process, cooling performance and block contacts are tested exclusively with EK-brand thermal pads. Listed thermal pad thicknesses apply only to EK thermal pads which are included in the package. EK does not guarantee compatibility with aftermarket alternatives for thermal interface material. | 0 | Vaata | |||
 EK Water Blocks EK-Quantum Vector Strix RTX 3080/3090 Active Backplate - Acetal GTIN: 3831109836545 Jahutid ja lisad EK-Quantum Vector Strix RTX 3080/3090 Active Backplate D-RGB - Acetal is a cutting-edge addition to the EK® Quantum Line. It is made to complement the existing EK-Quantum Vector Strix RTX 3080/3090 water blocks and actively cool the backside of a ROG® GeForce RTX™ 3080 and 3090 Strix GPU. EK-Quantum Vector Strix RTX 3080/3090 Active Backplate The EK-Quantum Vector Strix RTX 3080/3090 Active Backplate comes with a new terminal that replaces the stock terminal arriving with the Vector water block and links the water block and Vector Active backplate into a single unit. This way the whole enclosure requires only one inlet and one outlet, removing any unneeded additional tubing and reducing clutter. It is the ultimate aesthetic and performance solution that finds your GPU sandwiched between two water blocks allowing maximum cooling. The Vector Active Backplate directly cools the PCB hotspots that are found on the backside of the GPU core and the VRM (voltage regulation module). On the RX 3090, the VRAM located on the backside is cooled, while the RTX 3080 gets cooling for the PCB located around the front-mounted VRAM. Cooling liquid is channeled over all these critical areas. These newly developed active backplates feature a fin array with 8 wide channels allowing for very low flow restriction. This in turn allows overall lower temperatures, while the active backplate gets more than sufficient surface area for heat transfer. The base of this stealthy active backplate is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined out of durable Black POM acetal. The rest of the backplate is made of anodized aluminum and it does not come in contact with the liquid. These Vector Active Backplates also feature acetal terminals that match the top cover. The watertight sealing is ensured by high-quality EPDM O-rings. Technical Specification Dimensions: (LxHxW) - 281x154x33mm Enclosed EK-Quantum Vector Strix RTX 3080/3090 Active Backplate - Acetal Necessary mounting screws, nuts, and washers 1x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Warning: EK only guarantees compatibility with included EK-brand thermal pads. Installation process, cooling performance and block contacts are tested exclusively with EK-brand thermal pads. Listed thermal pad thicknesses apply only to EK thermal pads which are included in the package. EK does not guarantee compatibility with aftermarket alternatives for thermal interface material. | 0 | Vaata | |||
 EK Water Blocks EK-Quantum Vector RE RTX 3080/3090 Active Backplate D-RGB - Acryl EK-Quantum Vector RE RTX 3080/3090 Active Backplate D-RGB - Acryl is a cutting-edge addition to the EK® Quantum Line. It is made to complement the existing EK-Quantum Vector RE RTX 3080/3090 water blocks and actively cool the backside of a reference design NVIDIA® GeForce RTX™ 3080 and 3090 GPU. EK-Quantum Vector RE RTX 3080/3090 Active Backplate EK-Quantum Vector RE RTX 3080/3090 active backplate links the water block and the active backplate part with a new terminal, which replaces the stock terminal coming with your water block. This way the whole enclosure requires only one inlet and one outlet, removing any unneeded additional tubing and reducing clutter. It is the ultimate aesthetic and performance solution that finds your GPU sandwiched between two water blocks allowing maximum cooling. The Vector Active Backplate directly cools the PCB hotspots that are found on the backside of the GPU core and the VRM (voltage regulation module). On the RX 3090, the VRAM located on the backside is cooled, while the RTX 3080 gets cooling for the PCB located around the front-mounted VRAM. Cooling liquid is channeled over all these critical areas. These newly developed active backplates feature a fin array with 6 wide channels allowing for very low flow restriction. This in turn allows overall lower temperatures, while the active backplate gets more than sufficient surface area for heat transfer. The base of the active backplate is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. The rest of the backplate is made of nickel-plated aluminum and it does not come in contact with the liquid. These Vector Active Backplates also feature acrylic terminals that match the top cover. The watertight sealing is ensured by high-quality EPDM O-rings. D-RGB lighting on EK-Quantum Vector RE RTX 3080/3090 Active Backplate D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. This water block boasts a total of 8 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Technical Specification Dimensions: (LxHxW) - 223x124x15mm D-RGB cable length: 500mm D-RGB LED count: 8 D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) Enclosed EK-Quantum Vector RE RTX 3080/3090 Active Backplate D-RGB - Acryl Necessary mounting screws, nuts, and washers 1x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Warning: EK only guarantees compatibility with included EK-brand thermal pads. Installation process, cooling performance and block contacts are tested exclusively with EK-brand thermal pads. Listed thermal pad thicknesses apply only to EK thermal pads which are included in the package. EK does not guarantee compatibility with aftermarket alternatives for thermal interface material. | 0 | Vaata | |||
 Phobya WAR Termopadi XT 7W/mk 0,5mm (120x20mm)[1326] Colour: White Dimensions: 120x20x0,5mm Thermal conductivity: 7 W/mk maximum bridgeable gap: 0,5 mm other info: electrically non-conductive | 0 | Vaata | |||
 Koolance WAR Termopadi 0,5mm 1.5W/mk (120x20mm) [4038] Dimensions: 120x20x0,5mm Heat conductivity: 1,5 W/mK Maximum bridgeable gap: 0,5mm More: Electrically non-conductive Extent of delivery:1x Self-adhesive thermal pad 0,5mm (120x20mm) for ramplex, Mips and Koolance | 0 | Vaata | |||