Otsing: fan controller (arhiveeritud tooted)

PowerEdge R250 Server Intel Xeon E-2314 2.8GHz, 8M Cache, 4C/4T, Turbo (65W), 3200 MT/s Motherboard with Broadcom 5720 Dual Port 1Gb On-Board LOM No Controller Chassis with up to 4, 3.5" Hot Plug Hard Drives Software RAID w/Backplane 1x 16GB 3200MT/s DDR4 ECC UDIMM (up to 4 DIMMs) 1x 480GB SSD SATA Read Intensive 6Gbps 512 2.5in Hot-plug AG Drive,3.5in HYB CARR Single, Cabled Power Supply 450W, Platinum iDRAC9, Express 15GEN PCIe Riser with Fan with 1 x16 and 1 x8 Slots Standard Fan Heatsink for 80W On-Board LOM TPM 2.0 V3 3Yr Basic Warranty- Next Business Day Accessories: Standard Bezel 1U/2U Static Rails for 2-Post and 4-Post Racks C13 to C14, PDU Syle, 10AMP, 2m, PowerCord Factory Settings: Performance Optimized Power Saving BIOS Settings ?UEFI BIOS Boot Mode with GPT Partition

PowerEdge R250 Server Intel Xeon E-2314 2.8GHz, 8M Cache, 4C/4T, Turbo (65W), 3200 MT/s; Motherboard with Broadcom 5720 Dual Port 1Gb On-Board LOM; No Controller; Chassis with up to 4, 3.5" Hot Plug Hard Drives Software RAID w/Backplane; No Memory (UDIMM/ECC - DDR4); No Hard Drive/SSD; Single, Cabled Power Supply 450W, Platinum; iDRAC9, Basic 15GEN; Standard Fan; PCIe Riser with Fan with 1 x16 and 1 x8 Slots; TPM 2.0 V3; 3Yr Basic Warranty - Next Business Day -Accessories:- Standard Bezel; 1U/2U Static Rails for 2-Post and 4-Post Racks; C13 to C14, PDU Syle, 10AMP, 2m, PowerCord; -Factory Settings:- Performance Optimized; iDRAC, Factory Generated Password; UEFI BIOS Boot Mode with GPT Partition

PowerEdge R550 Server Intel Xeon Silver 4310 2.1G, 12C/24T, 10.4GT/s, 18M Cache, Turbo, HT (120W) DDR4-2666; Motherboard with Broadcom 5720 Dual Port 1Gb On-Board LOM; PERC H355 Controller Front; Chassis with up to 8, 3.5" Hot Plug Hard Drives; No Memory (RDIMM/ECC - DDR4); No Hard Drive/SSD; SAS/SATA Backplane; Dual, Hot-plug, Power Supply Redundant (1+1), 800W, Mixed Mode; iDRAC9, Enterprise (15GEN); Standard Fan; 1x16 LP+ 1x8(x4 link) LP; TPM 2.0 V3; 3Yr Basic Warranty - Next Business Day; -Accessories:- 2U Standard Bezel; Standard Fan Cold Swap 2U,V2 x5; ReadyRails Sliding Rails Without Cable Management Arm ; 2x C13 to C14, PDU Syle, 10AMP, 2m, PowerCord; -Factory Settings:- Performance Optimized; Power Saving BIOS Settings; UEFI BIOS Boot Mode with GPT Partition

PowerEdge R650xs Server Intel Xeon Silver 4314 2.4G, 16C/32T, 10.4GT/s, 24M Cache, Turbo, HT (135W) DDR4-2666 PERC H745 Controller, Front Chassis with up to 8, 2.5" Hot Plug Hard Drives No Memory (RDIMM - DDR4) No Hard Drive/SSD (SAS/SATA) Dual, Hot-plug, PSU (1+1), 800, Mixed Mode iDRAC9, Express (15GEN) Riser Config 4, 1xOCP 3.0(x16)+ 1x16LP ?Standard Fan x5 TPM 2.0 V3 3Yr Basic Warranty - Next Business Day Accessories: Standard Bezel SAS/SATA Backplane 2x C13 to C14, PDU Style, 10 AMP, 6.5 Feet (2m), Power Cord Factory Settings: Performance Optimized ?Power Saving BIOS Settings

PowerEdge R650xs Server Intel Xeon Silver 4314 2.4G, 16C/32T, 10.4GT/s, 24M Cache, Turbo, HT (135W) DDR4-2666 PERC H745 Controller, Front Chassis with up to 8, 2.5" Hot Plug Hard Drives No Memory (RDIMM - DDR4) No Hard Drive/SSD (SAS/SATA) Dual, Hot-plug, PSU (1+1), 800, Mixed Mode iDRAC9, Express (15GEN) Riser Config 4, 1xOCP 3.0(x16)+ 1x16LP ?Standard Fan x5 TPM 2.0 V3 3Yr Basic Warranty - Next Business Day Accessories: Standard Bezel SAS/SATA Backplane 2x C13 to C14, PDU Style, 10 AMP, 6.5 Feet (2m), Power Cord Factory Settings: Performance Optimized ?Power Saving BIOS Settings

The Eisbaer LT Aurora CPU AIO water cooler offers extremely good cooling performance due to the high-end components, which includes a full copper radiator. The components used are all from Alphacool’s classic custom water cooling sector and can also be found in its enterprise products for servers. The Eisbaer LT Aurora can be expanded with additional components thanks to the quick-release fastener. At its heart, the DC-LT 2 pump The exceedingly small and compact DC-LT 2 pump has been further optimized compared to its predecessor. The impeller sits suspended on a ceramic axle and is supported by two magnets. A 3-phase sinusoidal drive ensures a much smoother running of the pump, which significantly contributes to minimizing noise. The pump offers enough power to add another component, such as a GPU water cooler or another radiator, to the loop. Ideally, it is coupled with an Eiswolf 2 GPU AIO water cooler. This also uses a DC-LT 2 pump. DIY fittings and ES tubing The tubing and fittings come from the standard custom cooling segment and all use a standard G1/4" thread. Therefore, it is extremely easy to replace them. The black TPV hose comes, like the connectors, from the Alphacool ES series which is primarily installed in servers and workstations. The hose does not contain any plasticizers and, unlike classic PVC hoses, does not deform at high temperatures. The quick connector is not made of heavy brass, but of extremely light, durable and, robust nylon. The quick connector is compatible with many other models from the Alphacool product line. Cooler As with all Alphacool products, the cooler base is made of nickel-plated copper and is equipped with exceptionally fine cooling fins that are distributed over almost the entire base. A flow plate provides an accelerated flow over the cooling fins which increases the cooling performance. The water flow is optimized so that all areas of the cooler base are cooled evenly. Full Digital RGB Mounting The pump unit and fans are fully equipped with Digital RGB LEDs, also known as Addressable RGB or aRGB. Extensive effects can be set with the included controller or with the Digital RGB controller on the motherboard. For a nice visual effect, there is an illuminated polar bear (Eisbaer). For easier control via a controller, the fans and also the pumps can be connected in series via daisy-chain. This ensures a clean wiring of the individual LED components.   Compatibility: Compatibility Intel 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 Compatibility AMD AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 / TR4 / sTRX4 / sWRX / SP3   Technical Data Radiator L x W x H 390 x 120 x 25 mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 2x G1/4" Possible fan size 120mm Possible fan assembly 3x one-sided / 6x both-sided Technical Data cooler with pump L x W x H 69 x 69 x 45 mm Material cooler bottom nickel plated copper Material cooler top PMMA Threads 2x G1/4“ (+ 1x Fillport G1/4“) Pump type DC-LT2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6 - 13.5V DC Power consumption 3,2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 destilled water (CAS-Nummer 7732-18-5) Ingredient 2 Glysantin (CAS-Nummer 1017-21-1) Working temperatures 15C°/+90°C Technical data quick-release coupling Dimensions 95 x 27 mm Material Nylon Tube size 12,7/7,6 mm Color black Technical data connectors Dimensions (connection straight) 24 x 18 mm Quantity (connection straight) 2x Dimensions (connection 90°) 35 x 27 x 17 mm Quantity (connection 90°) 2x Tube size 12,7/7,6 mm Material brass Technical data tube Length 40 cm Material TPV (EPDM/PP) Color black Tube size 12,7/7,6 mm Hardness grade 35 Shore-A to 50 Shore-D Maximum working temperature -50 bis +155°C Technical data fans Speed 800 - 2000 RPM Static pressure 2,0 mm/H₂O Air flow rate 104,49 m³/h Bearing Hydraulic Connection 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V L x W x H 120 x 120 x 25 mm Cable length 187 g Voltage 60 °C

With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2500 rpm, it provides an air flow of 62.8 CFM, together with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity.   Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5   Technical data radiator L x W x H 153 x 120 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 19 Fan size 120mm Fan slots 1 one-sided / 2 double-sided Color black Technical data fans L x W x H 120 x 120 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.23 (Max. 0.4) A Rated Power 2.76 (Max. 4.8) W Rated Speed 0 - 2500rpm/min (±10%) Max. Air Flow 62.8CFM Max.Static Pressure 2.13mm-H2O Noise level (rated voltage, mute room, distance 1m) 33.0 (Max. 34.3) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 350mm

With the Core Storm water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop. Eisblock XPX Aurora CPU Cooler Alphacool's Eisblock XPX Aurora CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel. Core 100 Aurora Reservoir & VPP Apex Pump The Core reservoir combines performance with design. The reservoir tube is made of acrylic, while the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the expansion tank a subtle appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. The pump's speed can be read out via the 4-pin fan connector and controlled via PWM signal. The Apex VPP is supplied with power via a SATA connector. NexXxoS ST30 Full Copper 360mm Radiator V.2 All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS ST30 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop. Rise Aurora 120mm fans The fans can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m3/h) coupled with high static pressure (3.17mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 20 digitally addressable 5V RGB LEDs that illuminate the entire fan. AlphaTube HF 13/10mm tubing & HF G1/4" quick connect coupling The clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop. Eiszapfen 13/10mm G1/4" Connections All the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off. Thermal Paste & Coolant The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle. aRGB Controller, Cables, Tools & Accessories All cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately.   Compatibility: Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700 AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5   Technical data CPU cooler Dimensions (L x W x H) 75,8 x 75,8 x 33mm Material cooler nickel-plated copper Material housing nylon, acrylic Threads 2 x G1/4“ Illumination 3-Pin 5V, 15 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data reservoir Dimensions (L x W x H) 131 x 76,5 x 76,5mm Capacity 200 ml Material Pump top & cover acetal Material tube acrylic Threads 3x G1/4“ IT Illumination 3-Pin 5V, 12 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data pump Dimensions (L x W x H) 65 x 65 x 41mm Material synthetic material, aluminium, ceramics Threads 4-Pin PWM | SATA Rotational speed 2500 - 4500 RPM Operating voltage 8-13V DC / 14W IP32 Starting voltage 12V DC Maximum pumping head 4,25m Maximum flow rate 340L/h Max working temperature 60°C Pressure tested 0,8 Bar Technical data radiator Dimensions (L x W x H) 391,5 x 124 x 30mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" Possible fan size 120mm Possible fan assembly 3x one-sided / 6x both-sided Fin density 15 Max working temperature 60°C Pressure tested 0,8 Bar Technical data fan Dimensions (L x W x H) 120 x 120 x 25mm Speed 0 - 2500 RPM (+/- 10%) Threads 4-Pin PWM Voltage 12V DC Current consumption 0,65A (0,72 max) Static pressure 3,17 mm H2O Max. air flow 118,9 m³/h Noise max. 31,5 dB(A) Speedometer signal yes Auto-Restart yes Illumination 3-Pin 5V, 20 digital aRGB LEDs, 3.5W Technical data tube Dimensions (outer/inner) 13/10mm Material PVC Length 3m Color clear Technical data 13/10mm G1/4" fittings Material brass Threads 1x G1/4" OT | 1x tube connection 13/10mm Color black Technical data quick release coupling Dimensions (L x D) 60,3 x 26,1mm Material synthetic material Threads 2x G1/4“ IT Color black Technical data coolant Ingredients osmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%) Boiling point 105°C Freezing point -10°C Packaging unit 1L bottle Color clear (not UV-active) Technical thermal grease Viscosity (mPa. s) 3.000.000 Specific Gravity (g/cm³) 2,7 Thermal Conductivity (w/m-K) 16 Temperature Stability (Degree Celcius) -50 ~ 200 Color gray