Otsing: thermal pad (arhiveeritud tooted)

The next generation - the Alphacool Eisblock Aurora water cooler for Geforce RTX 40XX graphics cards. In order to dissipate the enormous heat of this graphics card generation in the best possible way, numerous optimizations have been made to the water cooler compared to the previous model. The fin structure was adapted and enables a very good water flow while increasing the cooling surface. The modified jet plate with improved inflow engine ensures an optimal distribution of the water on the cooling fins.Technical HighlightsThe fin structure of this Eisblock cooler generation was developed together with Nvidia board partners. The fin thickness is 0.4 mm, the distance between the cooling fins is 0.4 mm. This ensures a very good water flow while increasing the cooling surface. The jet plate has a revised inlay that spreads the water pressure better over the fins thus optimizing the heat absorption. The adjusted water inflow gives the water a better angle of inflow.Chrome-plated copperThe cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. DesignThe Aurora design of the Geforce RTX 40XX Eisblock generation is visually calmer and simpler. Only one O-ring runs around the entire cooler. The design around the cooling fins and jetplate makes for a cleaner look. The illumination of the digitally addressable RGB LEDs is even better distributed throughout the cooler as a result of the chrome plating. The terminal's design is in line with the classic Aurora design.Thermal paste & thermal padsThe included thermal compound is Alphacool's Subzero. With a thermal conductivity of 16 W/mK, it is one of the highest performing thermal pastes on the market. The electrically non-conductive thermal compund is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Alphacool Soft Pads with 0,5mm thickness are used on the voltage converter and the graphics memory. The thermal conductivity of the pads is 7 W/mK. The pads for the back of the PCB are 3mm thick and have a thermal conductivity of 3 W/mK. Compatibility:- Gigabyte GeForce RTX 4070 Ti Eagle 12G, 12GB GDDR6X (GV-N407TEAGLE-12G)- Gigabyte GeForce RTX 4070 Ti Eagle OC 12G, 12GB GDDR6X (GV-N407TEAGLE OC-12G)- Gigabyte GeForce RTX 4070 Ti Gaming OC 12G, 12GB GDDR6X (GV-N407TGAMING OC-12GD)- Gigabyte GIGABYTE GeForce RTX 4070 Ti Aero OC 12G, 12GB GDDR6X, HDMI, 3x DP (GV-N407TAERO OC-12GD)- Gigabyte GeForce RTX 4070 Ti SUPER Gaming OC 16G, 16GB GDDR6X (GV-N407TSGAMING OC-16GD) Technical data coolerDimensions (L x W x H)176,60 x 134,00 x 34,40mmMaterial coolerchrome-plated copperMaterial cooler topacrylicMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs13ColortransparentTechnical data backplateDimensions (L x W x H)176,60 x 109,50 x 6mmMaterialaluminiumColorblack

The next generation - the Alphacool Eisblock Aurora water cooler for Geforce RTX 40XX graphics cards. In order to dissipate the enormous heat of this graphics card generation in the best possible way, numerous optimizations have been made to the water cooler compared to the previous model. The fin structure was adapted and enables a very good water flow while increasing the cooling surface. The modified jet plate with improved inflow engine ensures an optimal distribution of the water on the cooling fins.Technical HighlightsThe fin structure of this Eisblock cooler generation was developed together with Nvidia board partners. The fin thickness is 0.4 mm, the distance between the cooling fins is 0.4 mm. This ensures a very good water flow while increasing the cooling surface. The jet plate has a revised inlay that spreads the water pressure better over the fins thus optimizing the heat absorption. The adjusted water inflow gives the water a better angle of inflow.Chrome-plated copperThe cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. DesignThe Aurora design of the Geforce RTX 40XX Eisblock generation is visually calmer and simpler. Only one O-ring runs around the entire cooler. The design around the cooling fins and jetplate makes for a cleaner look. The illumination of the digitally addressable RGB LEDs is even better distributed throughout the cooler as a result of the chrome plating. The terminal's design is in line with the classic Aurora design.Thermal paste & thermal padsThe included thermal compound is Alphacool's Subzero. With a thermal conductivity of 16 W/mK, it is one of the highest performing thermal pastes on the market. The electrically non-conductive thermal compund is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Alphacool Soft Pads with 1mm thickness are used on the voltage converter and the graphics memory. The thermal conductivity of the pads is 7 W/mK. The pads for the back of the PCB are 3mm thick and have a thermal conductivity of 3 W/mK. Compatibility:- Asus Dual GeForce RTX 4070 SUPER, DUAL-RTX4070S-12G, 12GB GDDR6X (90YV0K83-M0NA00)- Asus TUF Gaming GeForce RTX 4070 SUPER, TUF-RTX4070S-12G-GAMING, 12GB GDDR6X- Asus TUF Gaming GeForce RTX 4070 Ti OC, TUF-RTX4070TI-O12G-GAMING, 12GB GDDR6X (90YV0IJ0-M0NA00)- Asus TUF Gaming GeForce RTX 4070 Ti, TUF-RTX4070TI-12G-GAMING, 12GB GDDR6X (90YV0IJ1-M0NA00)- Asus TUF Gaming GeForce RTX 4070 Ti SUPER, TUF-RTX4070TIS-16G-GAMING, 16GB GDDR6X (90YV0KF1-M0NA00 ) Technical data coolerDimensions (L x W x H)231,00 x 142,50 x 36,27mmMaterial coolerchrome-plated copperMaterial cooler topacrylicMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs13ColortransparentTechnical data backplateDimensions (L x W x H)231,00 x 118,00 x 6,00mmMaterialaluminiumColorblack

The next generation - the Alphacool Eisblock Aurora water cooler for Radeon RX 7XXX graphics cards. In order to dissipate the enormous heat of this graphics card generation in the best possible way, numerous optimizations have been made to the water cooler compared to the previous model. The fin structure was adapted and enables a very good water flow while increasing the cooling surface. The modified jet plate with improved inflow engine ensures an optimal distribution of the water on the cooling fins.Technical HighlightsThe fin structure of this Eisblock cooler generation was developed together with AMD board partners. The fin thickness is 0.4 mm, the distance between the cooling fins is 0.4 mm. This ensures a very good water flow while increasing the cooling surface. The jet plate has a revised inlay that spreads the water pressure better over the fins thus optimizing the heat absorption. The adjusted water inflow gives the water a better angle of inflow.Chrome-plated copperThe cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.DesignThe Aurora design of the Radeon RX 7XXX Eisblock generation is visually calmer and simpler. Only one O-ring runs around the entire cooler. The design around the cooling fins and jetplate makes for a cleaner look. The illumination of the digitally addressable RGB LEDs is even better distributed throughout the cooler as a result of the chrome plating. The terminal's design is in line with the classic Aurora design.Thermal paste & thermal padsThe included thermal compound is Alphacool's Subzero. With a thermal conductivity of 16 W/mK, it is one of the highest performing thermal pastes on the market. The electrically non-conductive thermal compund is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850.000 TF. Alphacool Soft Pads with 1mm thickness are used on the voltage converter and the graphics memory. The thermal conductivity of the pads is 7 W/mK. The pads for the back of the PCB are 3mm thick and have a thermal conductivity of 3 W/mK. Compatibility:- PowerColor Radeon RX 7900 XTX Red Devil Limited Edition, 24GB GDDR6, HDMI, 3x DP (RX 7900 XTX 24G-E/OC/LIMITED)- PowerColor Radeon RX 7900 XTX Red Devil, 24GB GDDR6, HDMI, 3x DP (RX 7900 XTX 24G-E/OC) Technical data coolerDimensions (L x W x H)285,50 x 144,50 x 34,20mmMaterial coolerchrome-plated copperMaterial cooler topacrylicMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs15ColortransparentTechnical data backplateDimensions (L x W x H)285,50 x 120,00 x 6mmMaterialaluminiumColorblack

The Alphacool Aurora Acryl GPX Eisblock combines style with performance and extensive digital RGBlighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent highquality and fantastic performance. This perfectly describes the Aurora Acryl GPX EisblockMore Performance!During the development of the EIsblock Aurora GPX graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components byreducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-platedcopper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has alsobeen optimized. All important components such as the voltage transformers and the memory are nowsignificantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.New Design!The Eisblock Aurora GPX cooler has been designed so that lighting is more important than the previousmodels. The addressable digital RGB LEDs are embedded directly into the cooling block and run alongthe entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotesbetter light diffusion in the water cooler due to the reflections on these bevels. In addition, they createvarious contours, which give the Aurora GPX Eisblock cooler its very own unique identity.Copper or Aluminium?Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX Eisblock, the copperis nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking.Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermalconductivity of aluminium and is therefore clearly the better material for water cooling.Is There Anything Else New?The Eisblock Aurora GPX also relies on the new patented stop fittings, which sit flush with the surface ofthe terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On thefront of the terminal you can see the corresponding names of the compatible graphic card types. Ofcourse, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card watercooler.The Alphacool Aurora GPX Acryl is a complete redevelopment of the previous Alphacool graphics cardwater coolers. No technical compromises were made, but the entire technical know-how flowed into thedevelopment and implementation. Technical data GPU coolerDimension142 x 282 x 25 mmMax working temperature60 °CMaterial coolernickel plated copperMaterial topAcrylThikness of fins0,6 mmThreads4 x G1/4“Power supply Digital RGB3-Pin 5VPressure tested1,5 BarColortransparent

The Alphacool Aurora Acryl GPX Eisblock combines style with performance and extensive digital RGBlighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent highquality and fantastic performance. This perfectly describes the Aurora Acryl GPX EisblockMore Performance!During the development of the EIsblock Aurora GPX graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components byreducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-platedcopper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has alsobeen optimized. All important components such as the voltage transformers and the memory are nowsignificantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.New Design!The Eisblock Aurora GPX cooler has been designed so that lighting is more important than the previousmodels. The addressable digital RGB LEDs are embedded directly into the cooling block and run alongthe entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotesbetter light diffusion in the water cooler due to the reflections on these bevels. In addition, they createvarious contours, which give the Aurora GPX Eisblock cooler its very own unique identity.Copper or Aluminium?Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX Eisblock, the copperis nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking.Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermalconductivity of aluminium and is therefore clearly the better material for water cooling.Is There Anything Else New?The Eisblock Aurora GPX also relies on the new patented stop fittings, which sit flush with the surface ofthe terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On thefront of the terminal you can see the corresponding names of the compatible graphic card types. Ofcourse, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card watercooler.The Alphacool Aurora GPX Acryl is a complete redevelopment of the previous Alphacool graphics cardwater coolers. No technical compromises were made, but the entire technical know-how flowed into thedevelopment and implementation. Compatibility:- Sapphire Pulse Radeon RX 5600 XT, 6GB GDDR6 (11296-01-20G)- MSI Radeon RX 5700 Evoke OC, 8GB GDDR6 (V381-024R)- MSI Radeon RX 5700 Evoke, 8GB GDDR6- MSI Radeon RX 5700 Mech OC, 8GB GDDR6 (V381-005R)- MSI Radeon RX 5700 Mech, 8GB GDDR6- Sapphire Pulse Radeon RX 5700 8G, 8GB GDDR6 (11294-01-20G)- MSI Radeon RX 5700 XT Evoke OC, 8GB GDDR6 (V381-001R)- MSI Radeon RX 5700 XT Evoke, 8GB GDDR6- MSI Radeon RX 5700 XT Mech OC, 8GB GDDR6 (V381-003R)- MSI Radeon RX 5700 XT Mech, 8GB GDDR6- Sapphire Pulse Radeon RX 5700 XT 8G, 8GB GDDR6 (11293-01-20G) Technical data GPU coolerDimension (B x T x H)123 x 228 x 30 mmMax working temperature60 °CMaterial coolernickel plated copperMaterial topacrylThikness of fins0,6 mmThreads4 x G1/4“Power supply Digital RGB3-Pin 5VPressure tested1,5 BarColortransparent

The Alphacool Aurora Acryl GPX Eisblock combines style with performance and extensive digital RGBlighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent highquality and fantastic performance. This perfectly describes the Aurora Acryl GPX EisblockMore Performance!During the development of the EIsblock Aurora GPX graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components byreducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-platedcopper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has alsobeen optimized. All important components such as the voltage transformers and the memory are nowsignificantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.New Design!The Eisblock Aurora GPX cooler has been designed so that lighting is more important than the previousmodels. The addressable digital RGB LEDs are embedded directly into the cooling block and run alongthe entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotesbetter light diffusion in the water cooler due to the reflections on these bevels. In addition, they createvarious contours, which give the Aurora GPX Eisblock cooler its very own unique identityCopper or Aluminium?Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX Eisblock, the copperis nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking.Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermalconductivity of aluminium and is therefore clearly the better material for water cooling.Is There Anything Else New?The Eisblock Aurora GPX also relies on the new patented stop fittings, which sit flush with the surface ofthe terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On thefront of the terminal you can see the corresponding names of the compatible graphic card types. Ofcourse, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card watercooler. The Alphacool Aurora GPX Acryl is a complete redevelopment of the previous Alphacool graphics cardwater coolers. No technical compromises were made, but the entire technical know-how flowed into thedevelopment and implementation. Compatibility:- MSI Radeon RX 5600 XT Gaming X, 6GB GDDR6 (V381-231R)- MSI Radeon RX 5700 Gaming X, 8GB GDDR6 (V381-031R)- MSI Radeon RX 5700 XT Gaming X, 8GB GDDR6 (V381-032R) Technical data GPU coolerDimension (B x T x H)120,4 x 266,7 x 25,3 mmMax working temperature60 °CMaterial coolernickel plated copperMaterial topacrylglassThikness of fins0,6 mmThreads4 x G1/4“Power supply Digital RGB3-Pin 5VPressure tested1,5 BarColortransparent

Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht.The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component. Technical dataDimensions (L x W x H)100 x 100 x 1mmThermal conductivity7W/mKColorpink

Alphacool's ultimate solution for cooling your computer with a layer of ice. Not a layer of ice in the traditional sense made of frozen water, but a layer that will freeze any chip. The properties of the new thermal pads speak for themselves.The "Alphacool ice layer" offers all the advantages and typical properties of a thermal pad: self-adhesive, elastic, adaptable and much more! The area of application is just as versatile, whether for RAM and mainboard coolers or graphics card and CPU coolers, wherever the circuit board meets the heat sink, the Alphacool ice layer is a good choice.The Ice Layers Light are available in the 7W/mk power level in 0.5mm, 1mm and 1.5mm thicknesses. Perfect for compensating for height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers). These can be easily separated with scissors to individually adjust the right size for each component Technical dataDimensions (L x W x H)14 x 14 x 1mmThermal conductivity7W/mKColorpink