AORUS GeForce® GTX 1080 Ti Waterforce Xtreme Edition 11G Powered by GeForce® GTX 1080 Ti Integrated with 11GB GDDR5X 352-bit memory interface WATERFORCE All-in-one Cooling System Advanced Copper Back Plate Cooling AORUS VR Link provides the best VR experience RGB fusion – 16.8M customizable color lighting Protection Metal Back Plate Built for Extreme Overclocking 12+2 Power Phases AORUS Care provides 4 years warranty (Online registration required)
Powered by GeForce® GTX 1080 Ti Integrated with 11GB GDDR5X 352-bit memory interface WINDFORCE 3X Cooling System RGB fusion – 16.7M customizable color lighting Built for Extreme Overclocking 8+2 Power Phases
EK-FC1080 GTX G1 is a high-performance full-cover water block for GIGABYTE non-reference design NVIDIA® GeForce GTX 1080 and 1070 series graphics cards. Please check our Cooling Configurator online compatibility system for detailed compatibility list!This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas, thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC1080 GTX G1 water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps.The base of the block is made of nickel-plated electrolytic copper while the top is made of quality acrylic material. The top also features two pre-drilled slots for 3mm LED diodes. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for a safe and painless installation procedure.EK Water Blocks recommends the purchase of aesthetic retention backplate (EK-FC1080 GTX G1 Backplate - Black, Nickel) which improves the looks of your graphics cards and also provide some passive cooling to the circuit board VRM section.G1/4" threaded fittings can be used on both sides of the FC Terminal. Up to four EK-FC1080 GTX G1 water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block.Enclosed:- EK-FC1080 GTX G1 series water block - Mounting mechanism with screw-in brass standoffs- Thermal pads- Thermal grease EK-TIM Ectotherm (1g)Made in Slovenia - Europe!OtstarveVideokaartVentilaatorEiRadiaatorEiImpulsi-laiuse modulatsiooni (PWM) tugiEiÜhilduvad tootedNVIDIA GeForce GTX 1080, 1070, 1060MaterjalNikkelToote värvMust, ValgeVentilaatori läbimõõtEi
EK-FC1080 GTX G1 is a high-performance full-cover water block for GIGABYTE non-reference design NVIDIA® GeForce GTX 1080, -1070 and 1060 series graphics cards. Please check our Cooling Configurator online compatibility system for detailed compatibility list!This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas, thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC1080 GTX G1 water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps.The base of the block is made of nickel-plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for a safe and painless installation procedure.EK Water Blocks recommends the purchase of aesthetic retention backplate (EK-FC1080 GTX G1 Backplate - Black, Nickel) which improves the looks of your graphics cards and also provide some passive cooling to the circuit board VRM section.G1/4" threaded fittings can be used on both sides of the FC Terminal. Up to four EK-FC1080 GTX G1 water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block.MaterjalAtsetaal, NikkelToote värvMustVentilaatori läbimõõtEi
Gross depth (mm): 295 mm Gross width (mm): 160 mm Gross height (mm): 265 mm Plastic (No PET): 45 g Packing quantity: 1 pc(s) Volume (m3): 0.012508 m³ Tare weight (kg): 1 kg Warranty: 3 month(s) Gross weight: 3.62 kg Net weight: 2.62 kg Saleout: REFURBISHED WITHOUT ORIGINAL PACKAGING AND ACCESSORIES
Plastic (No PET): 45 g Gross depth (mm): 235 mm Gross width (mm): 410 mm Gross height (mm): 90 mm Warranty: 3 month(s) Gross weight: 1.5 kg Net weight: 1 kg Saleout: REFURBISHED WITHOUT ORIGINAL PACKAGING AND ACCESSORIES Packing quantity: 1 pc(s) Volume (m3): 0.0086715 m³ Tare weight (kg): 0.5 kg
EK-FC1080 GTX G1 Backplate - BlackAesthetic retention backplate for EK-FC1080 GTX G1 series water block.EK-FC1080 GTX G1 Backplate is a retention backplate made of black anodized aluminum for EK-FC1080 GTX G1 series water blocks.Backplate covers the whole lenght of graphics cards PCB, serves as an aesthetic add-on and also provides passive cooling for the backside of voltage regulation module (VRM).This backplate is guaranteed to be compatible only with GIGABYTE non-reference design NVIDIA® GeForce GTX 1080, -1070 and 1060 series graphics cards.Enclosed:- EK-FC1080 GTX G1 Backplate - Black- mounting mechanism- thermal padsMade in Slovenia - Europe!OtstarveVideokaartVentilaatorEiToetatud protsessoripesadEi ole toetatudToetatud graafikaadapteridNVIDIA GeForce GTX 1080Toote värvMust
The world-renowned manufacturer, Alphacool, offers the Eisblock GPX a very noble and high-quality full cover water cooler for your graphics card. The Eisblock GPX is available in two versions; An eye-catching version with a plexiglass window with RGB lighting to really show off or a simple but elegant version made of acetal. Both coolers are based on an identical copper heat sink, which is completely nickel-plated. The surface area where the water flows is very large, so that all components that give off heat are actively cooled with water which increases performance. The 35 fins of the cooler are only 0.6 mm thick and cover even large GPUs completely. The large cooling surface is also ideal for graphics cards with HBM memory. Backplates for both cooler variants are included, but they differ significantly. The acetal version uses a classic backplate coated with fins for better cooling. The plexi version of the Eisblock GPX water cooler uses a smooth backplate, which together with the cooler encloses the entire PCB. This makes the cooler and graphics card look like a single unit rather than a front and back plate. The SLI connector on Nvidia graphics cards is protected by a screwed cap, which can be removed if necessary. The optical highlight of the Plexi variant, besides the very large window, of course also the complete and integrated RGB lighting. This is compatible with ASUS Aurora Sync, Biostar VIVID LED DJ, Gigabyte RGB Fusion or MSI Mystic. But pay attention to the connection on your mainboard. You may need a Male-to-Female adapter for some motherboards. With the Alphacool EisBlock GPX full cover water cooler for your graphics card you get a high-quality cooler with excellent cooling performance. You have the choice between a simple but noble black acetal version or a striking, wonderfully illuminated and chic plexi version with a large viewing window. Compatibility Scope of Delivery Alphacool Eisblock GPX-N plexi Nvidia Geforce GTX 1080Ti M20 Mounting material Thermal pads Thermal paste SLI compatible module 2x screw plug Configurator for VGA cooler - find the right cooler fits to you The assembly instructions are available for download here Compatibility list Nvidia
The world-renowned manufacturer, Alphacool, offers the Eisblock GPX a very noble and high-quality full cover water cooler for your graphics card. The Eisblock GPX is available in two versions; An eye-catching version with a plexiglass window with RGB lighting to really show off or a simple but elegant version made of acetal. Both coolers are based on an identical copper heat sink, which is completely nickel-plated. The surface area where the water flows is very large, so that all components that give off heat are actively cooled with water which increases performance. The 35 fins of the cooler are only 0.6 mm thick and cover even large GPUs completely. The large cooling surface is also ideal for graphics cards with HBM memory. The optical highlight of the Plexi variant, besides the very large window, of course also the complete and integrated RGB lighting. This is compatible with ASUS Aurora Sync, Biostar VIVID LED DJ, Gigabyte RGB Fusion or MSI Mystic. But pay attention to the connection on your mainboard. You may need a Male-to-Female adapter for some motherboards. With the Alphacool EisBlock GPX full cover water cooler for your graphics card you get a high-quality cooler with excellent cooling performance. You have the choice between a simple but noble black acetal version or a striking, wonderfully illuminated and chic plexi version with a large viewing window. Compatibility Scope of Delivery Alphacool Eisblock GPX-N acetal Nvidia Geforce GTX 1080Ti M20 Mounting material Thermal pads Thermal paste SLI compatible module 2x screw plug Configurator for VGA cooler - find the right cooler fits to you The assembly instructions are available for download here Compatibility list AMD Note: This cooler is delivered without backplate. The backplate of the original cooler can still be used.
Plastic (No PET): 45 g Gross depth (mm): 237 mm Gross width (mm): 90 mm Gross height (mm): 407 mm Saleout: REFURBISHED. WITHOUT ORIGINAL PACKAGING AND ACCESSORIES. Warranty: 3 month(s) Gross weight: 1.52 kg Net weight: 1.2 kg Packing quantity: 1 pc(s) Volume (m3): 0.00868131 m³ Tare weight (kg): 0.32 kg
The world-renowned manufacturer, Alphacool, offers the Eisblock GPX a very noble and high-quality full cover water cooler for your graphics card. The Eisblock GPX is available in two versions; An eye-catching version with a plexiglass window with RGB lighting to really show off or a simple but elegant version made of acetal. Both coolers are based on an identical copper heat sink, which is completely nickel-plated. The surface area where the water flows is very large, so that all components that give off heat are actively cooled with water which increases performance. The 35 fins of the cooler are only 0.6 mm thick and cover even large GPUs completely. The large cooling surface is also ideal for graphics cards with HBM memory. Backplates for both cooler variants are included, but they differ significantly. The acetal version uses a classic backplate coated with fins for better cooling. The plexi version of the Eisblock GPX water cooler uses a smooth backplate, which together with the cooler encloses the entire PCB. This makes the cooler and graphics card look like a single unit rather than a front and back plate. The SLI connector on Nvidia graphics cards is protected by a screwed cap, which can be removed if necessary. The optical highlight of the Plexi variant, besides the very large window, of course also the complete and integrated RGB lighting. This is compatible with ASUS Aurora Sync, Biostar VIVID LED DJ, Gigabyte RGB Fusion or MSI Mystic. But pay attention to the connection on your mainboard. You may need a Male-to-Female adapter for some motherboards. With the Alphacool EisBlock GPX full cover water cooler for your graphics card you get a high-quality cooler with excellent cooling performance. You have the choice between a simple but noble black acetal version or a striking, wonderfully illuminated and chic plexi version with a large viewing window. Compatibility NVIDIA Titan X, 12GB GDDR5X, DVI, HDMI, 3x DisplayPort (900-1G611-2500-000) ASUS GeForce GTX 1080 Ti Founders Edition GTX1080TI-FE 11GB GDDR5X (90YV0AP0-U0NM00) Colorful GTX 1080 Ti Founders Edition 11GB GDDR5X ELSA GeForce GTX 1080 Ti Founders Edition (GD1080-11GERT) EVGA GeForce GTX 1080 Ti Founders Edition 11GB GDDR5X (11G-P4-6390) Gainward GeForce GTX 1080 Ti DuraPro 11GB GDDR5X Gainward GeForce GTX 1080 Ti Founders Edition 11GB GDDR5X (3897) Galax GeForce GTX 1080 Ti 11GB GDDR5X (80IUJBMDP9VT) Galax GeForce GTX 1080 Ti Founders Edition 11GB GDDR5X (80IUJ3MDXXNM) Inno3D GeForce GTX 1080 Ti Founders Edition 11GB GDDR5X (N108T-1DDN-Q6MO) Inno3D GeForce GTX 1080 Ti Gaming OC 11GB GDDR5X (N108T-1SDN-Q6MNX) Inno3D iChill GeForce GTX 1080 Ti X3 11GB GDDR5X (C108T3-1SDN-Q6MNX) Inno3D iChill GeForce GTX 1080 Ti X4 11GB GDDR5X (C108T4-1SDN-Q6MNX) KFA² GeForce GTX 1080 Ti Founders Edition 11GB GDDR5X (80IUJ3MDXXNK) KUROUTOSHIKOU GTX 1080 Ti Founders Edition (GF-GTX1080Ti-E11GB/FE) Manli GeForce GTX 1080 Ti Blower/Komendar Fan 11GB GDDR5X (M-NGTX1080TI/5RIHPPP) MSI GeForce GTX 1080 Ti Founders Edition 11GB GDDR5X (V801-1401R) Palit GeForce GTX 1080 Ti Founders Edition 11GB GDDR5X (NEB108T019LCF) PNY GeForce GTX 1080 Ti Founders Edition 11GB GDDR5X (GF108IGTX11EPB) Zotac GeForce GTX 1080 Ti Blower 11GB GDDR5X (ZT-P10810B-10P) Zotac GeForce GTX 1080 Ti Founders Edition 11GB GDDR5X (ZT-P10810A-10P) Scope of Delivery Alphacool Eisblock GPX-N acetal Nvidia Geforce GTX TITAN X Pascal / 1080 Ti M02 Mounting material Thermal pads Thermal paste SLI compatible module 2x screw plug Configurator for VGA cooler - find the right cooler fits to you The assembly instructions are available for download here Compatibility list AMD
Alphacool is making great strides with the new NexXxoS GPX cooler! This new cooling concept offers optimal performance and quality at a reasonable price! Upgrade Kit If you buy a new graphics card and want to integrate it into your cooling loop, you won't need to buy a new graphics card cooler, which can get pretty expensive. Instead, you can save money with this Alphacool GPX Upgrade Kit. Simply unscrew the GPX cooler from the old cooling fins and mount it on the new cooling fins - that is, on the upgrade kit. For the best results in cooling performance, first remove the old thermal paste from the GPX cooler and apply a new thing layer between the GPX cooler and the new upgrade kit. Function The GPU is actively cooled through ingenious new injection technology. All the other chips are sufficiently cooled through the passive cooler in which the GPU water cooler is enclosed. Cross Slot Structure The cross slot technology in the base plate, patented in 2004 and used in the Alphacool NexXxoS XP, has been developed further. The fins and channel structure have been refined. The remaining panes are 0.5 x 0.5mm in size and 2.5mm tall. This enables a very large and fast rate of heat transfer from the copper to the coolant. SLI Operation Through the outside-facing inlet and outlet, this cooler can be used in SLI configurations with little difficulty. This way, up to four graphics cards can be connected with the Alphacool GPX SLI Connector. Backplate Every cooler now includes a backplate which uses little passive cooling fins to cool the graphics card again, as well as giving the graphics card a finished appearance and protecting it at the same time. Cooling fins Passive cooling happens through perfectly balanced, barely 18mm deep cooling fins, which completely cover the remaining parts of the graphics card. Light air circulation in the case means this cooler is in no way inferior to conventional coolers. Graphics card not included Compatibility Gigabyte GeForce GTX 1080 Ti Gaming OC 11G, 11GB GDDR5X, DVI, HDMI, 3x DisplayPort (GV-N108TGAMING OC-11GD) GIGABYTE GeForce GTX 1080 Ti Gaming OC Black 11G 11GB GDDR5X (GV-N108TGAMINGOC BLACK-11GD) GIGABYTE GeForce GTX 1080 Ti Gaming 11G 11GB GDDR5X (GV-N108TGAMING-11GD) Scope of Delivery 1x Graphics card cooler 1x Backplate Thermal pads Thermal paste Assembly materials Configurator for VGA cooler Installation manual available for download here Compatibility list Nvidia
Packing quantity: 1 pc(s) Volume (m3): 0.008856 m³ Tare weight (kg): 0.48 kg Plastic (No PET): 45 g Gross depth (mm): 410 mm Gross width (mm): 240 mm Gross height (mm): 90 mm Warranty: 3 month(s) Gross weight: 1.48 kg Net weight: 1 kg Saleout: REFURBISHED WITHOUT ORIGINAL PACKAGING AND ACCESSORIES
Alphacool is making great strides with the new NexXxoS GPX cooler! This new cooling concept offers optimal performance and quality at a reasonable price! Upgrade Kit If you buy a new graphics card and want to integrate it into your cooling loop, you won't need to buy a new graphics card cooler, which can get pretty expensive. Instead, you can save money with this Alphacool GPX Upgrade Kit. Simply unscrew the GPX cooler from the old cooling fins and mount it on the new cooling fins - that is, on the upgrade kit. For the best results in cooling performance, first remove the old thermal paste from the GPX cooler and apply a new thing layer between the GPX cooler and the new upgrade kit. Function The GPU is actively cooled through ingenious new injection technology. All the other chips are sufficiently cooled through the passive cooler in which the GPU water cooler is enclosed. Cross Slot Structure The cross slot technology in the base plate, patented in 2004 and used in the Alphacool NexXxoS XP, has been developed further. The fins and channel structure have been refined. The remaining panes are 0.5 x 0.5mm in size and 2.5mm tall. This enables a very large and fast rate of heat transfer from the copper to the coolant. SLI Operation Through the outside-facing inlet and outlet, this cooler can be used in SLI configurations with little difficulty. This way, up to four graphics cards can be connected with the Alphacool GPX SLI Connector. Backplate Every cooler now includes a backplate which uses little passive cooling fins to cool the graphics card again, as well as giving the graphics card a finished appearance and protecting it at the same time. Cooling fins Passive cooling happens through perfectly balanced, barely 18mm deep cooling fins, which completely cover the remaining parts of the graphics card. Light air circulation in the case means this cooler is in no way inferior to conventional coolers. Graphics card not included Compatibility Gigabyte Aorus GeForce GTX 1080 Ti Xtreme Edition 11G, 11GB GDDR5X, DVI, 2x HDMI, HDMI-Side, 3x DisplayPort (GV-N108TAORUS X-11GD) GIGABYTE GeForce GTX 1080 Aorus Xtreme Edition 8G 8GB GDDR5X (GV-N1080AORUS X-8GD) GIGABYTE Aorus GeForce GTX 1080 Xtreme Edition 8G 11Gbps 8GB GDDR5X (GV-N1080AORUS X11-8GD) Scope of Delivery 1x Graphics card cooler 1x Backplate Thermal pads Thermal paste Assembly materials Configurator for VGA cooler Installation manual available for download here Compatibility list Nvidia
Alphacool is making great strides with the new NexXxoS GPX cooler! This new cooling concept offers optimal performance and quality at a reasonable price! Function The GPU is actively cooled through ingenious new injection technology. All the other chips are sufficiently cooled through the passive cooler in which the GPU water cooler is enclosed. Cross Slot Structure The cross slot technology in the base plate, patented in 2004 and used in the Alphacool NexXxoS XP, has been developed further. The fins and channel structure have been refined. The remaining panes are 0.5 x 0.5mm in size and 2.5mm tall. This enables a very large and fast rate of heat transfer from the copper to the coolant. SLI Operation Through the outside-facing inlet and outlet, this cooler can be used in SLI configurations with little difficulty. This way, up to four graphics cards can be connected with the Alphacool GPX SLI Connector. Backplate Every cooler now includes a backplate which uses little passive cooling fins to cool the graphics card again, as well as giving the graphics card a finished appearance and protecting it at the same time. Cooling fins Passive cooling happens through perfectly balanced, barely 18mm deep cooling fins, which completely cover the remaining parts of the graphics card. Light air circulation in the case means this cooler is in no way inferior to conventional coolers. Graphics card not included Compatibility Gigabyte Aorus GeForce GTX 1080 Ti Xtreme Edition 11G, 11GB GDDR5X, DVI, 2x HDMI, HDMI-Side, 3x DisplayPort (GV-N108TAORUS X-11GD) GIGABYTE GeForce GTX 1080 Aorus Xtreme Edition 8G 8GB GDDR5X (GV-N1080AORUS X-8GD) GIGABYTE Aorus GeForce GTX 1080 Xtreme Edition 8G 11Gbps 8GB GDDR5X (GV-N1080AORUS X11-8GD) Scope of Delivery 1x Graphics card cooler 1x Backplate Thermal pads Thermal paste Assembly materials Configurator for VGA cooler Installation manual available for download here Compatibility list Nvidia
