Otsing: thermal pad (arhiveeritud tooted)
868 toodet
 Alphacool double-sided adhesive pad 100x100x0,5mm Alphacool’s answer to the often difficult situation of being unable to mount the heatsink conventionally. With this double-sided thermal adhesive pad from Alphacool it is possible to mount a heatsink at any desired spot without having to worry about mounts, hole spacing or other constructive details. This is especially interesting for systems such as Alphacool’s MCX system to allow mounting of heatsinks for graphics cards or Mainboards. But long-term testing shows that these pads are capable of much more than just holding small heatsinks! A holding power of at least 16N/25mm means an adhesive force greater than with some duct tapes! This allows mounting even of heavy coolers and the capability to deal with shocks from transport or twisting/ permanent pressure. But the engineers at Alphacool also paid attention to the thermal conductivity aspect. Different from the first adhesive pads on the market, which were rather insulation than thermal conductor, these pads transfer the heat with a thermal conductivity of up to 1W/mK The pads are covered with a protective foil on both sides when shipped. When this foil is pulled off, the white pad becomes visible. The pad feels very similar to rubber, and has the same advantages: It adapts to the surfaces easily, hence allowing the best possible heat transfer. Multiple pre-cut dimensions make cutting almost obsolete, but should it be needed to adjust the size of a pad, simply use scissors or a knife! Technical specifications: Material: Polymers Colour: White Dimensions (L x W x H):100x100x0,5mm Thermal conductivity: Up to 1W/mk Adhesive strength: min: 16N/25mm electrically non-conductive conforms with ROHS Extent of delivery: 1x Alphacool double-sided thermal adhesive pad 100x100x0,5mm | 0 | Vaata | |||
 Alphacool double-sided adhesive pad 15x15x0,5mm Alphacool’s answer to the often difficult situation of being unable to mount the heatsink conventionally. With this double-sided thermal adhesive pad from Alphacool it is possible to mount a heatsink at any desired spot without having to worry about mounts, hole spacing or other constructive details. This is especially interesting for systems such as Alphacool’s MCX system to allow mounting of heatsinks for graphics cards or Mainboards. But long-term testing shows that these pads are capable of much more than just holding small heatsinks! A holding power of at least 16N/25mm means an adhesive force greater than with some duct tapes! This allows mounting even of heavy coolers and the capability to deal with shocks from transport or twisting/ permanent pressure. But the engineers at Alphacool also paid attention to the thermal conductivity aspect. Different from the first adhesive pads on the market, which were rather insulation than thermal conductor, these pads transfer the heat with a thermal conductivity of up to 1W/mK The pads are covered with a protective foil on both sides when shipped. When this foil is pulled off, the white pad becomes visible. The pad feels very similar to rubber, and has the same advantages: It adapts to the surfaces easily, hence allowing the best possible heat transfer. Multiple pre-cut dimensions make cutting almost obsolete, but should it be needed to adjust the size of a pad, simply use scissors or a knife! Technical specifications: Material: Polymers Colour: White Dimensions (L x W x H):15x15x0,5mm Thermal conductivity: Up to 1W/mk Adhesive strength: min: 16N/25mm electrically non-conductive conforms with ROHS Extent of delivery: 1x Alphacool double-sided thermal adhesive pad 15x15x0,5mm | 0 | Vaata | |||
 Alphacool double-sided adhesive pad 30x30x0,5mm Alphacool’s answer to the often difficult situation of being unable to mount the heatsink conventionally. With this double-sided thermal adhesive pad from Alphacool it is possible to mount a heatsink at any desired spot without having to worry about mounts, hole spacing or other constructive details. This is especially interesting for systems such as Alphacool’s MCX system to allow mounting of heatsinks for graphics cards or Mainboards. But long-term testing shows that these pads are capable of much more than just holding small heatsinks! A holding power of at least 16N/25mm means an adhesive force greater than with some duct tapes! This allows mounting even of heavy coolers and the capability to deal with shocks from transport or twisting/ permanent pressure. But the engineers at Alphacool also paid attention to the thermal conductivity aspect. Different from the first adhesive pads on the market, which were rather insulation than thermal conductor, these pads transfer the heat with a thermal conductivity of up to 1W/mK The pads are covered with a protective foil on both sides when shipped. When this foil is pulled off, the white pad becomes visible. The pad feels very similar to rubber, and has the same advantages: It adapts to the surfaces easily, hence allowing the best possible heat transfer. Multiple pre-cut dimensions make cutting almost obsolete, but should it be needed to adjust the size of a pad, simply use scissors or a knife! Technical specifications: Material: Polymers Colour: White Dimensions (L x W x H):30x30x0,5mm Thermal conductivity: Up to 1W/mk Adhesive strength: min: 16N/25mm electrically non-conductive conforms with ROHS Extent of delivery: 1x Alphacool double-sided thermal adhesive pad 30x30x0,5mm | 0 | Vaata | |||
 Alphacool double-sided adhesive pad 120x20x0,5mm Alphacool’s answer to the often difficult situation of being unable to mount the heatsink conventionally. With this double-sided thermal adhesive pad from Alphacool it is possible to mount a heatsink at any desired spot without having to worry about mounts, hole spacing or other constructive details. This is especially interesting for systems such as Alphacool’s MCX system to allow mounting of heatsinks for graphics cards or Mainboards. But long-term testing shows that these pads are capable of much more than just holding small heatsinks! A holding power of at least 16N/25mm means an adhesive force greater than with some duct tapes! This allows mounting even of heavy coolers and the capability to deal with shocks from transport or twisting/ permanent pressure. But the engineers at Alphacool also paid attention to the thermal conductivity aspect. Different from the first adhesive pads on the market, which were rather insulation than thermal conductor, these pads transfer the heat with a thermal conductivity of up to 1W/mK The pads are covered with a protective foil on both sides when shipped. When this foil is pulled off, the white pad becomes visible. The pad feels very similar to rubber, and has the same advantages: It adapts to the surfaces easily, hence allowing the best possible heat transfer. Multiple pre-cut dimensions make cutting almost obsolete, but should it be needed to adjust the size of a pad, simply use scissors or a knife! Technical specifications: Material: Polymers Colour: White Dimensions (L x W x H):120x20x0,5mm Thermal conductivity: Up to 1W/mk Adhesive strength: min: 16N/25mm electrically non-conductive conforms with ROHS Extent of delivery: 1x Alphacool double-sided thermal adhesive pad 120x20x0,5mm | 0 | Vaata | |||
 Alphacool thermal pad for NexXxoS GPX 3W/mk 15x15x1,5mm red marked PE Bag (24 pcs) Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use! The pads can also be cut to the desired size with a pair of scissors or a sharp knife. Application: Graphics card Ram cooler Voltage transformer on the mainboard North and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details: Color: gray Dimensions (L x W x H): 15 x 15 x 1.5mm Thermal conductivity: 3W / mk electrically non-conductive Scope of delivery: 24x Alphacool thermal pad for NexXxoS GPX | 0 | Vaata | |||
 Alphacool thermal pad for NexXxoS GPX 3W/mk 30x30x1,5mm red marked PE Bag (4 pcs) Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use! The pads can also be cut to the desired size with a pair of scissors or a sharp knife. Application: Graphics card Ram cooler Voltage transformer on the mainboard North and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details: Color: gray Dimensions (L x W x H): 30 x 30 x 1.5mm Thermal conductivity: 3W / mk electrically non-conductive Scope of delivery: 4x Alphacool thermal pad for NexXxoS GPX | 0 | Vaata | |||
 Alphacool thermal pad for NexXxoS GPX 3W/mk 15x15x3mm red marked PE Bag (24 pcs) Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use! The pads can also be cut to the desired size with a pair of scissors or a sharp knife. Application: Graphics card Ram cooler Voltage transformer on the mainboard North and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details: Color: gray Dimensions (L x W x H): 15 x 15 x 3mm Thermal conductivity: 3W / mk electrically non-conductive Scope of delivery: 24x Alphacool thermal pad for NexXxoS GPX | 0 | Vaata | |||
 Alphacool thermal pad for NexXxoS GPX 3W/mk 30x30x3mm red marked PE Bag (4 pcs) Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use! The pads can also be cut to the desired size with a pair of scissors or a sharp knife. Application: Graphics card Ram cooler Voltage transformer on the mainboard North and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details: Color: gray Dimensions (L x W x H): 30 x 30 x 3mm Thermal conductivity: 3W / mk electrically non-conductive Scope of delivery: 4x Alphacool thermal pad for NexXxoS GPX | 0 | Vaata | |||
| | |||||
 Alphacool thermal pad for NexXxoS GPX 3W/mk 30x30x2mm red marked PE Bag (2 pcs) Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use! The pads can also be cut to the desired size with a pair of scissors or a sharp knife. Application: Graphics card Ram cooler Voltage transformer on the mainboard North and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details: Color: gray Dimensions (L x W x H): 30 x 30 x 2mm Thermal conductivity: 3W / mk electrically non-conductive Scope of delivery: 2x Alphacool thermal pad for NexXxoS GPX | 0 | Vaata | |||
 Alphacool thermal pad for NexXxoS GPX 3W/mk 15x15x2mm red marked PE Bag (24 pcs) Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use! The pads can also be cut to the desired size with a pair of scissors or a sharp knife. Application: Graphics card Ram cooler Voltage transformer on the mainboard North and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details: Color: gray Dimensions (L x W x H): 15 x 15 x 2mm Thermal conductivity: 3W / mk electrically non-conductive Scope of delivery: 24x Alphacool thermal pad for NexXxoS GPX | 0 | Vaata | |||
 Alphacool Eisschicht thermal pad - 11W/mK 100x100x1mm Alphacool ’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured. | 0 | Vaata | |||
 Alphacool Eisschicht thermal pad - 11W/mK 100x100x1,5mm Alphacool ’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured. | 0 | Vaata | |||
 Alphacool Eisschicht thermal pad - 11W/mK 120x20x1mm - 2 Stück Alphacool ’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured. | 0 | Vaata | |||
 Alphacool Eisschicht thermal pad - 14W/mK 100x100x0,5mm Alphacool ’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured. | 0 | Vaata | |||
 Alphacool Eisschicht therml pad - 14W/mK 100x100x1mm Alphacool ’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured. | 0 | Vaata | |||
 Alphacool Eisschicht thermal pad - 14W/mK 100x100x1,5mm Alphacool ’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured. | 0 | Vaata | |||
 Alphacool Eisschicht thermal pad - 14W/mK 120x20x0,5mm - 2 Stück Alphacool ’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured. | 0 | Vaata | |||
 Alphacool Eisschicht thermal pad - 14W/mK 120x20x1mm - 2 Stück Alphacool ’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured. | 0 | Vaata | |||
 Alphacool Eisschicht thermal pad - 14W/mK 120x20x1,5mm - 2 Stück Alphacool ’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured. | 0 | Vaata | |||
 Alphacool Eisschicht thermal pad - 17W/mK 100x100x0,5mm Alphacool ’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured. | 0 | Vaata | |||
 Alphacool Eisschicht thermal pad - 17W/mK 100x100x1mm Alphacool ’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured. | 0 | Vaata | |||
 Alphacool Eisschicht thermal pad - 17W/mK 100x100x1,5mm Alphacool ’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured. | 0 | Vaata | |||
 Alphacool Eisschicht thermal pad - 17W/mK 120x20x0,5mm - 2 Stück Alphacool ’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured. | 0 | Vaata | |||
 Alphacool Eisschicht thermal pad - 17W/mK 120x20x1mm - 2 Stück Alphacool ’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured. | 0 | Vaata | |||
 Alphacool Eisschicht thermal pad - 17W/mK 120x20x1,5mm - 2 Stück Alphacool ’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured. | 0 | Vaata | |||
 Alphacool Eisschicht Light thermal pad - 7W/mK 100x100x1mm Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves. The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht. The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component. Technical Specifications Dimensions: 100 x 100 x 1mm 7W/mK Scope of Delivery 1x Alphacool Eisschicht Light Thermal Pad - 7W/mK 100x100x1mm | 0 | Vaata | |||
 Alphacool Eisschicht Light thermal pad - 7W/mK 100x100x1,5mm Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves. The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht. The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component. Technical Specifications Dimensions: 100 x 100 x 1.5mm 7W/mK Scope of Delivery 1x Alphacool Eisschicht Light Thermal Pad - 7W/mK 100x100x1.5mm | 0 | Vaata | |||
 Alphacool Eisschicht Light thermal pad - 7W/mK 120x20x0,5mm Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves. The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht. The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component. Technical Specifications Dimensions: 120 x 20 x 0.5mm 7W/mK Scope of Delivery 1x Alphacool Eisschicht Light Thermal Pad - 7W/mK 120x20x0.5mm | 0 | Vaata | |||
 Alphacool Eisschicht Light thermal pad - 7W/mK 120x20x1mm Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves. The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht. The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component. Technical Specifications Dimensions: 120 x 20 x 1mm 7W/mK Scope of Delivery 1x Alphacool Eisschicht Light Thermal Pad - 7W/mK 120x20x1mm | 0 | Vaata | |||
 Alphacool Eisschicht Light thermal pad - 7W/mK 120x20x1,5mm Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves. The light version of the Alphacool Eisschicht ("ice sheet") is the "small and weak" version at 7W/mK, but is definitely strong enough. Any hardware components can now be put together neatly and easily with thermal pads. The Alphacool Eisschicht offers all the benefits and typical qualities of a thermal pad: self-adhesive, elastic, flexible, and much more! Just as varied are the options for placement: whether on RAM or motherboard coolers, or graphics card and CPU coolers, any place where chips meet cooler bodies is a good place for an Alphacool Eisschicht. The Eisschicht Light, with a performance level of 7W/mK, is available in 0.5mm, 1mm, and 1.5mm thicknesses. Perfect for levelling height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers) sizes. These can easily be cut with scissors to get the right size for any component. Technical Specifications Dimensions: 120 x 20 x 1.5mm 7W/mK Scope of Delivery 1x Alphacool Eisschicht Light Thermal Pad - 7W/mK 120x20x1.5mm | 0 | Vaata | |||
 Alphacool Vesijahutus Eisfach - Single Laing DDC - Dual 5,25 Bay Station incl. 1x Laing DDC310 - black The step towards perfection The new Alphacool AGB comes in three different models. You can either connect a Laing DDC, the Alphacool DC-LT or the Laing D5/Alphacool VPP655 at the backplate depending on the model which you use. The brushed plate provides an optical finishing touch which is underlined by the high quality processing. The front consists of a scretch-secure soft-touch surface painted in black-matt. The Eisfach is mounted in two of the front 5,25" bays which provides a good overview of the container and the fill level is easily being checked through the lighted window at the back. Additionally, the Alphacool logo in the front can be lighted by connecting the 3-pin connector with a power source. A lot of details complement the first impression! Two 1/4" holes at the top side are available for the first filling. To refill you can simply remove and extract the fillport in the front and two 1/4" holes at the bottom side facilitate the draining of the liquid. There are two lighting modules at the right hand side at the back of the container behind the window for 5mm LEDs. This provides a unique opportunity for personalised lighting and optic. Further two holes at the left hand side provide additional opportunities to fill or drain the liquid. The last two 1/4" threads are used to fill or drain the container. A Bubble Down module has been placed behind the inlet to prevent turbulences that could lead air into the watercircle. Technical data: material: plastic and metal color: black measurements (LxDxH): 148 x 118 x 84,5mm connector thread: 10x 1/4" lighting: 2x 5mm LED Pump: The Laing DDC pump is one of the best known pumps in the watercooling industry. Recently we have been working with Laing to take the DDC to the next level. The new Laing DDC310 was designed with a perfect balance of power and silence in mind. Unlike other versions with the plastic base we have revised the design with new superbly tuned brass housing which aids the pumps cooling and guarantees longer life especially when placed in areas with limited airflow. This new housing promises a longer life of the pump. Through the cooling fins and air flow as well as an internal thermal pad attached directly to the pump board maximum cooling is achieved. Another feature is the included decoupling option. If a pump top with a M4 threaded mounting hole, such as the Alphacool Laing DDC Acetal top is present. The special M4 screws can be screwed directly into the decoupling set and then into the case. The pump also comes as standard with an anti-vibration mounting system . Available in black nickel and silver nickel. This pump should be the first choice for your watercooling system. Technical Details: Dimensions: 61 x 60 x 21mm Color: Black nickel, black Power consumption: 10W Material: Brass, Stainless Steel, Aluminium oxide, hard coal Maximum lifting height: 2,44m Maximum system temperature: 60 ° C Maximum flow: 200l / h Voltage: 12V DC Power connector: 4 Pin Molex Tacho signal: 3-Pin Molex Scope of delivery: 1x Alphacool Eisfach - Single Laing DDC - Dual 5,25 Bay Station incl. 1x Alphacool Laing DDC310 - black Mountingmaterial Download 3D-file (.stp) | 0 | Vaata | |||
 Alphacool Vesijahutus Eisfach - Single Laing DDC - Dual 5,25 Bay Station incl. 1x Laing DDC310 - argent A step towards perfection The new Alphacool reservoir comes in three different models. You can either connect a Laing DDC, an Alphacool DC-LT, or a Laing D5/Alphacool VPP655 at the backplate, depending on the model you use. The craftsmanship on this reservoir is first-class. The brushed plate covering the outside provides an optical finishing touch, and the front consists of a scratch-resistant soft-touch surface painted matte black. The Eisfach is mounted in two of the front 5.25" bays, which provides a good overview of the container, and the fill level can be checked easily through the backlit window. Additionally, the Alphacool logo in the front can be illuminated by connecting the 3-pin connector to a power source. Many details make up the first impression! Two 1/4" holes on the top side are available for the first filling. To refill, you can simply unscrew and remove the fill port in the front, while two 1/4" holes at the bottom side facilitate the draining of the liquid. There are two lighting modules for 5mm LEDs on the right-hand side of the back of the container, behind the window. This provides a unique opportunity for a personalised appearance and lighting. Two more holes on the left-hand side provide additional places to fill or drain the liquid. The last two 1/4" threads are intended for the inlet and outlet. A Bubble Down module has been placed behind the inlet to prevent turbulence that could let air into the circulation. Technical specifications: Material: plastic, metal Colour: black Dimensions (LxDxH): 148 x 118 x 84.5mm Connection threads: 10x 1/4" Lighting: 2x 5mm LED Pump The well-known Laing DDC pumps are getting a new addition. Though freshly packaged, this pump can begin its life with lots of self-confidence. A few details have been changed. First, we held back a little in performance in order to solve a widespread problem: the volume! Few other pumps can match this one in terms of reducing noise generation from water. For the most up-to-date water cooling systems with CPU and GPU cooling, this pump should be the first choice. Unlike before, this pump does not come in the familiar plastic casing. It has an all-new perfectly tailored brass case gracing its exterior. This new case ensures a longer lifespan for the pump. Air flows through the cooling fins, then over an interior thermal pad directly to the pump board. Another feature is the included decoupling option, if the pump top has an M4 attachment thread, like on the Alphacool Laing DDC Acetal Top. With the special M4 screws, the included decoupling can be screwed into the head of the screws and then attached to the case. The pump ships without a top to facilitate free choice of a top. Available in black nickel and silver nickel variants. Technical Details: Dimensions: 61 x 60 x 21mm Colour: silver nickel, black Power consumption: 10W Material: brass, stainless steel, aluminium oxide, hard carbon Maximum head: 2.44m Maximum system temperature: 60 ° C Maximum flow rate: 200 l/h Voltage: 12V DC Power connector: 4-pin molex Tacho signal: 3-pin molex Scope of delivery: 1x Alphacool Eisfach - Single Laing DDC - Dual 5.25 Bay Station incl. 1x Alphacool Laing DDC310 - silver Mounting material Notice Not intended for long-term operation with fluids containing titanium dioxide or glycerin. These additives are typically found in pastel colours. Download 3D-file (.stp) | 0 | Vaata | |||
 Alphacool Vesijahutus MCX one The MCX one miniature waterblock offers a multitude of possibilities. It allows most efficient cooling of e.g. RAM modules on graphics cards or VRM modules and can be mounted easily. If the criteria is flexibility and design in combination with optimal performance, the MCX one is an adequate solution. Your investment is also long-term as the MCX components can be used again if e.g. purchasing a new graphics card. Technical specifications: Dimensions: 15x15x5mm Material: Nickel plated copper Tubing size: 3mm inner diameter Download 3D-file (.stp) Please note : For mounting of this cooler we recommend our self-adhesive thermal pads (Item no.: 31085, 31086, 31087 or 31084) This product has been reviewed for you: Radeon3d | 0 | Vaata | |||
 Alphacool Vesijahutus MCX one copper edition The MCX one miniature waterblock offers a multitude of possibilities. It allows most efficient cooling of e.g. RAM modules on graphics cards or VRM modules and can be mounted easily. If the criteria is flexibility and design in combination with optimal performance, the MCX one is an adequate solution. Your investment is also long-term as the MCX components can be used again if e.g. purchasing a new graphics card. Technical specifications: Dimensions: 15x15x5mm Material: Full Copper Tubing size: 3mm inner diameter Download 3D-file (.stp) Please note : For mounting of this cooler we recommend our self-adhesive thermal pads (Item no.: 31085, 31086, 31087 or 31084) | 0 | Vaata | |||
 Alphacool MCX ram The MCX one miniature waterblock offers a multitude of possibilities. It allows most efficient cooling of e.g. RAM modules on graphics cards or VRM modules and can be mounted easily. If the criteria is flexibility and design in combination with optimal performance, the MCX one is an adequate solution. Your investment is also long-term as the MCX components can be used again if e.g. purchasing a new graphics card. Technical specifications: Dimensions: 15x15x5mm Material: Nickel plated copper Tubing size: 3mm inner diameter Download 3D-file (.stp) Please note: For mounting of this cooler we recommend our self-adhesive thermal pads (Item no.: 31085, 31086, 31087 or 31084) This product has been reviewed for you: Radeon3d | 0 | Vaata | |||
 Alphacool MCX ram copper edition The MCX one miniature waterblock offers a multitude of possibilities. It allows most efficient cooling of e.g. RAM modules on graphics cards or VRM modules and can be mounted easily. If the criteria is flexibility and design in combination with optimal performance, the MCX one is an adequate solution. Your investment is also long-term as the MCX components can be used again if e.g. purchasing a new graphics card. Technical specifications: Dimensions: 15x15x5mm Material: Full Copper Tubing size: 3mm inner diameter Download 3D-file (.stp) Please note: For mounting of this cooler we recommend our self-adhesive thermal pads (Item no.: 31085, 31086, 31087 or 31084) | 0 | Vaata | |||
 Alphacool Vesijahutus NexXxoS GPX accessory kit 3W/mk This Alphacool NexXxoS GPX pack 3W/mK Set is the perfect addition or replacement for the new Alphacool GPX series of GPU coolers. Thanks to the 2 different sizes (30x30mm and 15x15mm) and 3 different thicknesses (1.5, 2 and 3mm) each spot that should transfer the heat to the heat sink can be covered. Scope of delivery: Thermal pads (LxBxH) 2 pieces (30x30x1.5mm) 2 pieces (30x30x2mm) 2 pieces (30x30x3mm) 12 pieces (15x15x1.5mm) 12 pieces (15x15x3mm) | 0 | Vaata | |||
 Alphacool Vesijahutus GPU RAM Copper Heatsinks 6,5x6,5mm - 10pcs The small heat sinks are the perfect addition for cooling various electronic components such as the graphics card VRam, the voltage transformer on a motherboard, or even in a power amplifier or in RC vehicles. To ensure maximum heat capacity and cooling performance, the coolers are made of copper. Alphacool uses a special coating to prevent the infamous greenish discolouration on copper as much as possible. This increases the lifespan of the cooler and ensures steady cooling performance. The coolers can be installed onto the desired components with optional thermal paste or self-adhesive thermal pads. Technical Data Dimensions: 6,5 x 6,5mm Material: Fullcopper Scope of Delivery Alphacool GPU RAM Copper Heatsinks 6,5x6,5mm - 10pcs | 0 | Vaata | |||
 Alphacool Vesijahutus Heatmaster 2 cooler More power per channel for the Heatmaster 2! To allow connection of even more powerful pumps or more fans to one channel, this cooler was developed to allow integration into the water cooling loop. This increases the output power of an individual channel from 18W to 38W. This allows maximum utilization of the potential of the channels. Important: The total power draw from all channels must not exceed 75W. The increased cooling performance and easy installation with the included 1mm thick thermal pad and mounting material help lift the Heatmaster2 to a new performance level. With a copper cooling plate and Acetal top plate both cooling performance and looks are perfect! The G1/4” connection threads allow maximum fitting compatibility and make for quick integration into any cooling loop. Technical specifications: Material: Copper, Acetal Colour: Copper, black Dimensions (L x W x H): 86 x 15 x 13mm Connection thread size: ¼” Extent of delivery: 1x Alphacool Heatmaster 2 water block 2x M3x10 screw 2x Washer 3,2x0,5 PA 2x Spacer 3,2x2 PA 1x Thermal pad 30x30x1mm 1x Allen key suitable for the included screws Download 3D-file (.stp) | 0 | Vaata | |||
 Alphacool Vesijahutus Laing DDC metal bottom - black nickel The new Alphacool passive cooler for the Laing DDC pump offers more than just cooling. This new housing promises a longer life of the pump. Through the cooling fins and air flow as well as an internal thermal pad attached directly to the pump board maximum cooling is achieved. Another feature is the included decoupling option. If a pump top with a M4 threaded mounting hole, such as the Alphacool Laing DDC Acetal top is present. The special M4 screws can be screwed directly into the decoupling set and then into the case. Available in black nickel and silver nickel variant. Technical Details: Dimensions: 61.7 x 61.7 x 26,1mm Material: Brass Color: silver nickel Scope of delivery: 1x Alphacool Laing DDC bottom metal - silver nickel 1x Thermal Decoupling Mounting material | 0 | Vaata | |||
 Alphacool Vesijahutus Laing DDC metal bottom - silver nickel Alphacool's passive cooler for the Laing DDC pumps is now here and offers more than just cooling. This new case promises a longer lifespan for your pump. Air streams through the cooling fins over an inner thermal pad directly to the pump board. A further feature is the included decoupling option. When a pump attachment with an M4 mounting thread, such as the Alphacool Laing DDC Acetal top, is used, the included decoupling can be screwed into the head of the special M4 screws, which is then connected to the case. Available in black nickel and silver nickel versions. Technical Details: Dimensions: 61.7 x 61.7 x 26.1 mm Material: brass Colour: silver nickel Scope of Delivery: 1x Alphacool Laing DDC metal bottom - silver nickel 1x thermal pad Decoupling set | 0 | Vaata | |||
 Alphacool Vesijahutus GPU RAM Copper Heatsinks 14x14mm - 10pcs The small heat sinks are the perfect addition for cooling various electronic components such as the graphics card VRam, the voltage transformer on a motherboard, or even in a power amplifier or in RC vehicles. To ensure maximum heat capacity and cooling performance, the coolers are made of copper. Alphacool uses a special coating to prevent the infamous greenish discolouration on copper as much as possible. This increases the lifespan of the cooler and ensures steady cooling performance. The coolers can be installed onto the desired components with optional thermal paste or self-adhesive thermal pads. Technical Data Dimensions: 14 x 14mm Material: Fullcopper Scope of Delivery Alphacool GPU RAM Copper Heatsinks 14x14mm - 10pcs | 0 | Vaata | |||
 Alphacool Vesijahutus GPU RAM Copper Heatsinks 10x10mm - 10pcs The small heat sinks are the perfect addition for cooling various electronic components such as the graphics card VRam, the voltage transformer on a motherboard, or even in a power amplifier or in RC vehicles. To ensure maximum heat capacity and cooling performance, the coolers are made of copper. Alphacool uses a special coating to prevent the infamous greenish discolouration on copper as much as possible. This increases the lifespan of the cooler and ensures steady cooling performance. The coolers can be installed onto the desired components with optional thermal paste or self-adhesive thermal pads. Technical Data Dimensions: 10 x 10mm Material: Fullcopper Scope of Delivery Alphacool GPU RAM Copper Heatsinks 10x10mm - 10pcs | 0 | Vaata | |||
 Alphacool Vesijahutus Laing DDC310 - Single Edition - silver Alphacool's new Low Noise Edition of the Laing DDC for absolute silence! The Laing DDC pump is one of the best known pumps in the watercooling industry. Recently we have been working with Laing to take the DDC to the next level. The new Laing DDC310 was designed with a perfect balance of power and silence in mind. Unlike other versions with the plastic base we have revised the design with new superbly tuned brass housing which aids the pumps cooling and guarantees longer life especially when placed in areas with limited airflow. This new housing promises a longer life of the pump. Through the cooling fins and air flow as well as an internal thermal pad attached directly to the pump board maximum cooling is achieved. Another feature is the included decoupling option. If a pump top with a M4 threaded mounting hole, such as the Alphacool Laing DDC Acetal top is present. The special M4 screws can be screwed directly into the decoupling set and then into the case. The pump also comes as standard with an anti-vibration mounting system . Available in black nickel and silver nickel. This pump should be the first choice for your watercooling system. Technical Details Dimensions: 61 x 60 x 21mm Color: Silver nickel, black Power consumption: 10W Material: Brass, Stainless Steel, Aluminium oxide, hard coal Maximum lifting height: 2,44m Maximum system temperature: 60 ° C Maximum flow: 200l / h Voltage: 12V DC Power connector: 4 Pin Molex Tacho signal: 3-Pin Molex Scope of delivery 1x Alphacool Laing pump DDC310 1x Alphacool Laing DDC bottom metal - silver nickel 1x Thermal Decoupling mounting material Download 3D-file (.stp) Datasheet Note Not suitable for continuous operation with liquids containing titanium dioxide or glycerine. Typically, many pastel colors use these additives. | 0 | Vaata | |||
 Alphacool Vesijahutus Laing DDC310 - Single Edition - black Alphacool's new Low Noise Edition of the Laing DDC for absolute silence! The Laing DDC pump is one of the best known pumps in the watercooling industry. Recently we have been working with Laing to take the DDC to the next level. The new Laing DDC310 was designed with a perfect balance of power and silence in mind. Unlike other versions with the plastic base we have revised the design with new superbly tuned brass housing which aids the pumps cooling and guarantees longer life especially when placed in areas with limited airflow. This new housing promises a longer life of the pump. Through the cooling fins and air flow as well as an internal thermal pad attached directly to the pump board maximum cooling is achieved. Another feature is the included decoupling option. If a pump top with a M4 threaded mounting hole, such as the Alphacool Laing DDC Acetal top is present. The special M4 screws can be screwed directly into the decoupling set and then into the case. The pump also comes as standard with an anti-vibration mounting system . Available in black nickel and silver nickel. This pump should be the first choice for your watercooling system. Technical Details Dimensions: 61 x 60 x 21mm Color: Black nickel, black Power consumption: 10W Material: Brass, Stainless Steel, Aluminium oxide, hard coal Maximum lifting height: 2,44m Maximum system temperature: 60 ° C Maximum flow: 200l / h Voltage: 12V DC Power connector: 4 Pin Molex Tacho signal: 3-Pin Molex Scope of delivery 1x Alphacool Laing pump DDC310 1x Alphacool Laing DDC bottom metal - black nickel 1x Thermal Decoupling mounting material Download 3D-file (.stp) Datasheet Note Not suitable for continuous operation with liquids containing titanium dioxide or glycerine. Typically, many pastel colors use these additives. | 0 | Vaata | |||
 Alphacool Vesijahutus Upgrade-Kit for NexXxoS GPX - Nvidia Geforce GTX 970 M02 - black (without GPX Solo) Alphacool is making great strides with the new NexXxoS GPX cooler! This new cooling concept offers optimal performance and quality at a reasonable price! Upgrade Kit If you buy a new graphics card and want to integrate it into your cooling loop, you won't need to buy a new graphics card cooler, which can get pretty expensive. Instead, you can save money with this Alphacool GPX Upgrade Kit. Simply unscrew the GPX cooler from the old cooling fins and mount it on the new cooling fins - that is, on the upgrade kit. For the best results in cooling performance, first remove the old thermal paste from the GPX cooler and apply a new thing layer between the GPX cooler and the new upgrade kit. Function The GPU is actively cooled through ingenious new injection technology. All the other chips are sufficiently cooled through the passive cooler in which the GPU water cooler is enclosed. Cross Slot Structure The cross slot technology in the base plate, patented in 2004 and used in the Alphacool NexXxoS XP, has been developed further. The fins and channel structure have been refined. The remaining panes are 0.5 x 0.5mm in size and 2.5mm tall. This enables a very large and fast rate of heat transfer from the copper to the coolant. SLI Operation Through the outside-facing inlet and outlet, this cooler can be used in SLI configurations with little difficulty. This way, up to four graphics cards can be connected with the Alphacool GPX SLI Connector. Backplate Every cooler now includes a backplate which uses little passive cooling fins to cool the graphics card again, as well as giving the graphics card a finished appearance and protecting it at the same time. Cooling fins Passive cooling happens through perfectly balanced, barely 18mm deep cooling fins, which completely cover the remaining parts of the graphics card. Light air circulation in the case means this cooler is in no way inferior to conventional coolers. Graphics card not included Compatibility EVGA Geforce GTX 760 2GB GDDR5 ( 02G-P4-2762-KR) EVGA GeForce GTX 760 FTW ACX Cooler 4GB GDDR5 (04G-P4-3768) EVGA GeForce GTX 760 Superclocked ACX Cooler 2GB GDDR5 (02G-P4-2765) EVGA GeForce GTX 970 ACX 2.0 4GB GDDR5 (04G-P4-2972) EVGA GeForce GTX 970 ACX 4GB GDDR5 (04G-P4-0972) EVGA GeForce GTX 970 SuperClocked ACX 2.0 4GB GDDR5 (04G-P4-2974) EVGA GeForce GTX 970 SuperClocked ACX 4GB GDDR5 (04G-P4-0974) Scope of Delivery 1x Graphics card cooler 1x Backplate Thermal pads Thermal paste Assembly materials Configurator for VGA cooler Installation manual available for download here Compatibility list Nvidia | 0 | Vaata | |||
 Alphacool Vesijahutus Upgrade-Kit for NexXxoS GPX - Nvidia Geforce GTX 980 M08 - black (without GPX Solo) With the new NexXxoS GPX coolers Alphacool is again a step ahead! Optimum performance and quality in a new cooling design for a great price! Upgrade Kit: The GPX upgrade kit lets you reuse your existing GPX waterblock and saves money over buying a completely new waterblock for your new graphics card. With the GPX upgrade kits you simply remove the GPX block from your old plate and mount it on the new plate included in the upgrade kit. For best results please make sure you apply a thin layer of thermal paste between the cooler and new plate. Back plate: The GPX range always Includes a back plate which uses small passive fins to cool rear of the graphics card. Cooling fins: The passive front plate cooling uses 18mm deep cooling fins that cover the rest of the graphics card completely. Graphics card not included Compatible: MSI GTX 980 Ti Lightning, GeForce GTX 980 Ti, 6GB GDDR5, DVI, HDMI, 3x DisplayPort (V325-003R) Scope of delivery: 1x VGA cooler 1x Back plate Thermal pads Thermal Compound mounting material configurator for VGA cooler. The installation manual can be downloaded here compatibility list Nvidia | 0 | Vaata | |||
 Alphacool Vesijahutus Upgrade-Kit for NexXxoS GPX - Nvidia Geforce GTX 980 M10 - black (without GPX Solo) With the new NexXxoS GPX coolers Alphacool is again a step ahead! Optimum performance and quality in a new cooling design for a great price! Upgrade Kit: The GPX upgrade kit lets you reuse your existing GPX waterblock and saves money over buying a completely new waterblock for your new graphics card. With the GPX upgrade kits you simply remove the GPX block from your old plate and mount it on the new plate included in the upgrade kit. For best results please make sure you apply a thin layer of thermal paste between the cooler and new plate. Back plate: The GPX range always Includes a back plate which uses small passive fins to cool rear of the graphics card. Cooling fins: The passive front plate cooling uses 18mm deep cooling fins that cover the rest of the graphics card completely. Graphics card not included Compatible: KFA2 GeForce GTX 980 Ti Hall Of Fame, 6GB GDDR5, DVI, HDMI, 3x DisplayPort (98IRH5DHF7XH/98IRH5DHF7HF) Scope of delivery: 1x VGA cooler 1x Back plate Thermal pads Thermal Compound mounting material configurator for VGA cooler. The installation manual can be downloaded here compatibility list Nvidia | 0 | Vaata | |||
 Alphacool Vesijahutus Upgrade-Kit for NexXxoS GPX - Nvidia Geforce GTX 960 M07 - black (without GPX Solo) With the new NexXxoS GPX coolers Alphacool is again a step ahead! Optimum performance and quality in a new cooling design for a great price! Upgrade Kit: The GPX upgrade kit lets you reuse your existing GPX waterblock and saves money over buying a completely new waterblock for your new graphics card. With the GPX upgrade kits you simply remove the GPX block from your old plate and mount it on the new plate included in the upgrade kit. For best results please make sure you apply a thin layer of thermal paste between the cooler and new plate. Back plate: The GPX range always Includes a back plate which uses small passive fins to cool rear of the graphics card. Cooling fins: The passive front plate cooling uses 18mm deep cooling fins that cover the rest of the graphics card completely. Graphics card not included Compatible: Palit GeForce GTX 960 OC, 2GB GDDR5, 2x DVI, HDMI, DisplayPort (NE5X960S1041F/NE5X960S1041-2060F/NE5X960S1041-2061F) Scope of delivery: 1x VGA cooler 1x Back plate Thermal pads Thermal Compound mounting material configurator for VGA cooler. The installation manual can be downloaded here compatibility list Nvidia | 0 | Vaata | |||
 Alphacool Vesijahutus Upgrade-kit for NexXxoS GPX - AMD R9 380 M06 - black (without GPX Solo) With the new NexXxoS GPX coolers Alphacool is again a step ahead! Optimum performance and quality in a new cooling design for a great price! A new sophisticated injection system means the GPU is actively cooled. All other chips are sufficiently cooled by the passive cooler which is also in contact with the watercooling block for extra efficiency. The patented technology “Philips structure” from the Alpha NexXxoS XP in 2004, was further developed improving the base plate. The Fins and channel structure has been further refined. The fins are now 0.5 x 0.5 mm and 2.5 mm high. This enables a very large and rapid heat transfer from the copper to the coolant. SLI mode: The inlet and outlet are positioned of easy use in SLI mode. Up to four graphics cards can also be connected with the Alphacool GPX SLI connector. Back plate: The GPX range always Includes a back plate which uses small passive fins to cool rear of the graphics card. Cooling fins: The passive front plate cooling uses 18mm deep cooling fins that cover the rest of the graphics card completely. Graphics card not included Compatible: Scope of delivery: 1x VGA cooler 1x Back plate Thermal pads Thermal Compound mounting material configurator for VGA cooler The installation manual can be downloaded here compatibility list ATI | 0 | Vaata | |||
