Otsing: thermal pad (arhiveeritud tooted)

The kryoM.2 is a PCIe 4x adapter for M.2/M-Key NGFF PCIe SSD and is compatible with the form factors 2280, 2260 and 2242. The adapter uses a multilayer PCB with gold surface where the individual layers are connected to each other to optimize the thermal management. The SSD is installed with a thermal pad which already allows a better cooling over regular adapters. The water block covers the front side of the SSD with a second thermal pad and ensures maximum performance of high speed SSDs. The connector terminal of the water block is the same as used for the kryographics blocks. This allows using kryoconnect adapter kits to connect several blocks directly with each other. To ensure a good quality and reliability the connector for the M.2 SSD comes from Amphenol, the PCIe contacts are plated with hard gold and the circuit paths are impedance controlled. Dimensions ca. 152 x 84 x 20 mm incl. bracket Scope of delivery: Adapter board Water block, G1/4 connection threads Mounting material

This thermally conductive pad is ideally suited to be used with the kryoM.2 Adapter board (between adapter board and M.2 SSD module). It is made from soft, silicone based material. Technical Details Dimensions: ca. 70 x 20 x 1.8 mm Maximum gap to be filled: 1.8 mm Not electrically conductive Scope of delivery One thermally conductive pad

The kryoM.2 micro is a passive heat sink for single-sided M.2 SSDs and is compatible with design size 2280. kryoM.2 micro Highlights High-quality heat sink made from black anodised aluminium with laser engraving Stainless steel clips for easy and secure installation Includes high-quality thermal pad Includes self-adhesive protective film for electrical insulation for the stainless steel clips The kryoM.2 micro simply clips onto the SSD with the included stainless steel clips made from spring steel. The included thermal pad is placed between the SSD and the cooler beforehand. Its cooling power is sufficient for many uses, and the heat sink's small dimensions make it perfect for virtually all motherboard makes and models. The SSD does not undergo any mechanical stress during assembly. The clips attach from the sides and reach just over the edges of the aluminium piece. They do not touch the card's edges. Dimensions ca. 70 x 24 x 9 mm incl. mounting clips Scope of Delivery Passive heat sink made from anodised aluminium Two stainless steel clips Thermal pad Protective film for SSD rear Please note: SSD not included. Compatible with M.2 design size 2280 (width 22 mm, length 80 mm), height S1/S2/S3 (single-sided, maximum component height 1.2/1.35/1.5 mm, up to max. 2.3 mm incl. PCB).

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 30x30x4mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 4 mm electrically non-conductive Extent of delivery: 1x Thermal pad 30x30x4mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 15x15x3mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 3 mm electrically non-conductive Extent of delivery: 1x Thermal pad 15x15x3mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 15x15x4mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 4 mm electrically non-conductive Extent of delivery: 1x Thermal pad 15x15x4mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 15x15x0,5mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 0,5 mm electrically non-conductive Extent of delivery: 1x Thermal pad 15x15x0,5mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 100x100x1,5mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 1,5 mm electrically non-conductive Extent of delivery: 1x Thermal pad Ultra 5W/mk 100x100x1,5mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads

All new: Phobya's improved thermal pads with 7W/mK are able to match even high-end thermal compounds! These "XT" thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is equipped with a protective foil which needs to be removed before use. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical specifications: Colour: White Dimensions: 100x100x0,5mm Thermal conductivity: 7 W/mk maximum bridgable gap: 1,5 mm electrically non-conductive Extent of delivery: 1x Phobya thermal pad XT 7W/mk 100x100x1,5mm (1 piece) Data sheet to the thermal pads This product has been reviewed for you (by): Script-Base Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 100x100x0,5mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 0,5 mm electrically non-conductive Extent of delivery: 1x Thermal pad 100x100x0,5mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 100x100x1mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 1 mm electrically non-conductive Extent of delivery: 1x Thermal pad 100x100x1mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 100x100x3mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 3 mm electrically non-conductive Extent of delivery: 1x Thermal pad 100x100x3mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 30x30x0,5mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 0,5 mm electrically non-conductive Extent of delivery: 1x Thermal pad 30x30x0,5mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 30x30x1mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 1 mm electrically non-conductive Extent of delivery: 1x Thermal pad 30x30x1mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! This product has been reviewed for you: Freeocen

All new: Phobya's improved thermal pads with 7W/mK are able to match even high-end thermal compounds! These "XT" thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is equipped with a protective foil which needs to be removed before use. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical specifications: Colour: White Dimensions: 100x100x0,5mm Thermal conductivity: 7 W/mk maximum bridgable gap: 0,5 mm electrically non-conductive Extent of delivery: 1x Phobya thermal pad XT 7W/mk 100x100x0,5mm (1 piece) Data sheet to the thermal pads This product has been reviewed for you (by): Script-Base Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 15x15x1,5mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 1,5 mm electrically non-conductive Extent of delivery: 1x Thermal pad Ultra 5W/mk 15x15x1,5mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 15x15x2m Thermal conductivity: 5 W/mk maximum bridgeable gap: 2 mm electrically non-conductive Extent of delivery: 1x Thermal pad 15x15x2mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen

All new: Phobya's improved thermal pads with 7W/mK are able to match even high-end thermal compounds! These "XT" thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is equipped with a protective foil which needs to be removed before use. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical specifications: Colour: White Dimensions: 100x100x0,5mm Thermal conductivity: 7 W/mk maximum bridgable gap: 1 mm electrically non-conductive Extent of delivery: 1x Phobya thermal pad XT 7W/mk 100x100x1mm (1 piece) Data sheet to the thermal pads This product has been reviewed for you (by): Script-Base Freeocen

This special pad prevents damages and chipping or shorts and fits on all Chips without a protective frame with an open Core. The special feature of this pad is that it additionally features great thermal conductivity unlike other protective pads. Advantages: Open Cores are protected Mounting of coolers/ waterblocks is made easier and safer Electrical non-conductivity prevents shorts Thermal conductivity optimizes cooling of the Chip Technical specifications: Thermal conductivity: 5W/mk Thickness: 1mm Outer dimensions: 35x35mm Inner cut-out: 15x15mm Please not that the protective pads installed on Mainboards may have different thicknesses. If the thickness may deviate by more than 0,5mm it may result in damages to the hardware during installation. Data sheet to the thermal pads This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 50x50x1mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 1 mm electrically non-conductive Extent of delivery: 1x Thermal pad 50x50x1mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 100x100x2mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 2 mm electrically non-conductive Extent of delivery: 1x Thermal pad 100x100x2mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 30x30x3mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 3 mm electrically non-conductive Extent of delivery: 1x Thermal pad 30x30x3mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 30x30x5mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 5 mm electrically non-conductive Extent of delivery: 1x Thermal pad 30x30x5mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 120x20x1mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 1 mm electrically non-conductive Extent of delivery: 1x Thermal pad 120x20x1mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 15x15x5mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 5 mm electrically non-conductive Extent of delivery: 1x Thermal pad 15x15x5mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 30x30x2mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 2 mm electrically non-conductive Extent of delivery: 1x Thermal pad 30x30x2mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 120x20x0,5mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 0,5 mm electrically non-conductive Extent of delivery: 1x Thermal pad 120x20x0,5mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 30x30x1,5mm Thermal conductivity: 5 W/mk maximum bridgeable gap: 1,5 mm electrically non-conductive Extent of delivery: 1x Thermal pad Ultra 5W/mk 30x30x1,5mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details: Colour: Grey Dimensions: 120x20x1,5mm Thermal conductivity: 5 W/mK maximum bridgeable gap: 1,5 mm electrically non-conductive Extent of delivery: 1x Thermal pad Ultra 5W/mK 1,5mm (120x20mm) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal pads This product has been reviewed for you: Freeocen

All new: Phobya's improved thermal pads with 7W/mK are able to match even high-end thermal compounds! These "XT" thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is equipped with a protective foil which needs to be removed before use. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical specifications: Colour: White Dimensions: 120x20x0,5mm Thermal conductivity: 7 W/mk maximum bridgeable gap: 0,5 mm electrically non-conductive Extent of delivery: 1x Phobya thermal pad XT 7W/mK 0.5mm (120x20mm) for ramplex, innovatek, Mips, Koolance Data sheet to the thermal pads This product has been reviewed for you (by): Script-Base Freeocen

All new: Phobya's improved thermal pads with 7W/mK are able to match even high-end thermal compounds! These "XT" thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is equipped with a protective foil which needs to be removed before use. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical specifications: Colour: White Dimensions: 120x20x0,5mm Thermal conductivity: 7 W/mk maximum bridgeable gap: 1,5 mm electrically non-conductive Extent of delivery: 1x Phobya thermal pad XT 7W/mK 1.5mm (120x20mm) for ramplex, innovatek, Mips, Koolance Data sheet to the thermal pads This product has been reviewed for you (by): Script-Base Freeocen

All new: Phobya's improved thermal pads with 7W/mK are able to match even high-end thermal compounds! These "XT" thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is equipped with a protective foil which needs to be removed before use. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical specifications: Colour: White Dimensions: 120x20x0,5mm Thermal conductivity: 7 W/mk maximum bridgeable gap: 1 mm electrically non-conductive Extent of delivery: 1x Phobya thermal pad XT 7W/mK 1mm (120x20mm) for ramplex, innovatek, Mips, Koolance Data sheet to the thermal pads This product has been reviewed for you (by): Script-Base Freeocen

Toote kirjeldus inglise keeles:After redefining ultra-slim gaming laptops with the original Zephyrus, ROG brings hardcore gaming to an even thinner design framed by super-narrow bezels. ROG Zephyrus S uses innovative engineering to cool its 8th Gen Intel® Core™ i7 processor and GeForce® GTX 1070 with Max-Q design, so you can immerse yourself in its no-compromise 144Hz/3ms display. THE NEW STANDARD FOR ULTRAPORTABLE GAMINGClever design and expert craftsmanship are required to put high-end chips into the slimmest gaming laptop ever. At just 14.95~15.75mm thin, the metal chassis and CNC-milled unibody lid make ROG Zephyrus S portable enough for life on the go and tough enough to survive everyday abuse. In one fluid motion of hidden scissor-door hinges, it transforms from svelte sidekick to gaming powerhouse. SHRINKING BEZELS WITHOUT SACRIFICING SPEEDSuper-narrow bezels draw you deeper into the action on the 144Hz IPS-level display. The high refresh rate makes gameplay smoother and lowers input lag, while the 3ms gray-to-gray response time produces sharper visuals with no blurring. With the full sRGB color gamut and wide viewing angles, ROG Zephyrus S blends speed and beauty without compromise. POTENT PERFORMANCE RIVALS DESKTOPSDon’t be fooled by its lithe body; ROG Zephyrus S has ample power for AAA games, VR experiences, and serious creative work. The six-core 8th Gen Intel® CoreTM i7 CPU and GeForce® GTX 1070 with Max-Q design GPU deliver desktop-like performance, while an NVMe SSD up to 1TB offers speedy storage for your growing game library and professional portfolio. COOL UNDER PRESSUREThe unique ROG Active Aerodynamic System (AAS) expands to help Zephyrus S sustain high GPU clocks with demanding games. Lifting the lid opens a 5-mm intake that increases airflow by up to 22% compared to traditional designs. Anti-dust tunnels keep the four heatsinks clean to preserve cooling performance and system stability as the hours add up. AURA SYNC BEYOND THE GAMING KEYBOARDThe keyboard ensures precise input in the heat of battle, and it’s built to last. You can customize the backlight colors and effects to suit your style, and another configurable RGB zone illuminates the AAS intake at the back. Aura Sync harmonizes lighting across compatible ROG mice, headsets, and other peripherals to give your setup a cohesive look.AMP UP YOUR AUDIOROG Zephyrus S puts audio at the forefront with dual speakers aimed right at you. Smart amplifier tech keeps them within thermal and excursion limits, so you can pump up the volume without harming the cones. The resulting output is louder, with more bass and range that help you hear every sound, and you can plug in a headset for even more immersion. UNIFIED SYSTEM TUNING AND PERSONALIZATIONROG Armoury Crate unifies system and lighting control to put essentials at your fingertips in a single utility. You can easily change settings for both and define up to four game profiles that automatically make adjustments when you launch your favorite titles. These options are just the beginning for what will become an even more versatile tool.EXTENSIVE CONNECTIVITYROG Zephyrus S has all the connectivity needed for gaming on the go. Type-C™ (USB-C™) ports are available at USB 3.1 Gen 2 and Gen 1 speeds, while Type-A USB 3.1 Gen 2 and USB 2.0 ports are perfect for a gamepad and mouse. HDMI 2.0 at the back supports 4K UHD displays up to 60Hz, so you can game and entertain on big-screen TVs.

Toote kirjeldus inglise keeles:ROG Zephyrus S set the standard for ultra-slim Windows 10 Pro gaming laptops. Now it has bigger aspirations with a super-narrow-bezel 17-inch display in a chassis just 18.7mm thin. Zephyrus S GX701 is loaded with up to a GeForce RTX™ 2080 GPU and 8th Gen Intel® Core™ i7 CPU. Immerse in its 144Hz/3ms panel with Pantone®-validated colors, and use the ROG-exclusive GPU switch to change between G-SYNC™ for gaming and Optimus for battery life.THE MOST COMPACT 17-INCH GAMING LAPTOP EVERImmersing yourself in a larger display usually means lugging a larger laptop, but slim bezels and smart design make ROG Zephyrus S the smallest in its class. Easily carry it around town or across the world thanks to compact dimensions that put a 17-inch display in a 15-inch form factor. The sleek magnesium-alloy body fits inside standard bags* and is strong enough to stand up to everyday life.* ROG Zephyrus S GX701 fits into the 15-inch ASUS and ROG backpacks below.ASUS backpack: 15180-00201000 / 15180-00201100ROG backpack: 15180-00203000SPECTACULAR VISUALS MIX SPEED AND PRECISIONSlender bezels draw you deeper into the action on the 144Hz IPS-level display. The high refresh rate makes gameplay smoother and lowers input lag, while the 3ms grey-to-grey response time produces sharper visuals with no blurring. Color accuracy is critical for content creators, so factory calibration and ProArt™ TruColor Technology deliver a Pantone® Validated palette.QUICKLY SWITCH GEARS FOR WORK AND PLAYLive a double life powered by the ROG-exclusive GPU switch. With just a few clicks, ROG Zephyrus S transitions between better gaming and longer battery life. G-SYNC mode synchronizes the GPU and display to deliver smoother gameplay with lower input lag and tear-free graphics, while Optimus mode selectively turns off the discrete GPU to save power with everyday desktop productivity and entertainment.POTENT PERFORMANCE WITH NEXT-GEN GRAPHICSRemarkably slim without sacrificing speed, ROG Zephyrus S harnesses the latest GeForce RTX™ 2080 GPU and 8th Gen Intel® Core™ i7 CPU to deliver desktop-like performance for hardcore gaming, serious creative work, and cutting-edge VR. The GPU enables photorealistic graphics thanks to real-time ray tracing technology and AI-enhanced image processing. It boosts up to 1230MHz at 100W, with 8GB of GDDR6 VRAM clocked at 6001MHz, and both can be overclocked. This powerful core is backed by up to 24GB of DDR4 RAM for heavy multitasking and a 1TB NVMe SSD for your game library and professional portfolio.SMARTER COOLING FOR FASTER PERFORMANCEUltra-slim laptops leave less breathing room for cooling, so the unique ROG Active Aerodynamic System (AAS) expands to help Zephyrus S sustain top performance for gaming and other heavy loads. Lifting the lid opens a large intake that increases airflow by up to 32% compared to typical designs. Anti-dust tunnels keep the heatsinks clean to preserve cooling efficiency and system stability over time.CUSTOMIZE AND COORDINATE COLORSThe forward keyboard position lowers surface temperatures on the desktop-style layout, so you can game in comfort for hours. Customize per-key RGB backlighting for different games and workflows, and match colors and effects with compatible peripherals using Aura Sync. Illumination extends to a unique volume roller positioned for quick adjustment and a glowing numpad that appears on the touchpad.INCREDIBLE SOUND POWERED BY SMARTAMPSmart amplifier tech keeps the speakers within thermal and excursion limits when you spin the volume wheel, so you can turn it up without harming the cones. The amplified output is louder, with more bass and range that help you hear enemies on the battlefield, dialog in videos, and subtleties of your productivity soundtrack. Plug in a headset for immersion, and go deeper with virtual surround sound.TAP INTO TYPE-C CHARGINGROG was first to support both DC and Type-C charging on gaming laptops. USB Power Delivery lets Zephyrus S charge from portable power packs, so you don't have to find a socket when the battery gets low. Fast-charging support reverses the flow, using up to 3A to quickly revive smartphones and other devices. You can also do everyday work with a smaller 65W adapter that lightens your load on the road.COMPREHENSIVE CONNECTIVITYROG Zephyrus S has all the connectivity needed for gaming and working on the go. Alongside the USB 3.1 Gen 2 Type-C™ with DisplayPort™ 1.4 and Power Delivery, one Type-A port offers Gen 2 connectivity for devices that can keep up. Another Type-C™ (USB-C™) port is available at USB 3.1 Gen 1 speed, while additional Type-A ports are perfect for a gamepad, mouse, or USB storage. HDMI 2.0 supports 4K UHD displays up to 60Hz, so you can game and entertain on big-screen TVs.EXTERNAL CAMERA FOR BETTER LIVE-STREAMINGUpgrade your stream with the ROG GC21 external camera. It captures crisp Full HD detail at a silky 60 FPS that makes movement smoother and more nuanced. Despite doubling the frame rate of conventional cameras, ROG GC21 folds to just 17mm thin and slips easily into a pocket. Position the USB-connected camera anywhere for the perfect angle, and be heard clearly by the beamforming microphone array.* External camera option varies by region.UNIFIED SYSTEM TUNING AND PERSONALIZATIONROG Armoury Crate unifies system and lighting control to put essentials at your fingertips in a single utility. You can easily change settings for both and define up to four game profiles that automatically make adjustments when you launch your favorite titles. These options are just the beginning for what will become an even more versatile tool.*Interface may vary by version.

Individual, yet suitable for everyone. Minimalistic, yet full of elegance. High Performance and made for your next project: The Alphacool Eisblock GPX! Style Meets Performance Alphacool has already created a name for itself with its Eisblock GPX series among modders, gamers and performance enthusiasts. Alphacool offers several models to fit many NVIDIA® graphics card layouts, so there's something for everyone. For the first time the Eisblock GPX Plexi Light and Plexi is equipped with ARGB (Addressable RGB) lighting. Also, for all fans of simplicity Alphacool also offers the classic acetal version, which lets your GPU stay sleek and beautiful with a minimalistic noble design. Only the Best for You The Alphacool Eisblock series is based on completely nickel-plated copper bottoms, which are made from a single block of copper. The flow is optimised by the generous water channels in the best possible way so that they have been finely tuned to dissipate the heat. Thanks to the full cover design, all coolers have the performance to cool your GPU during all gaming and heavy-duty activities in the best possible way. This gives your hardware a longer life and protects it optimally. The included backplates puts the finishing touches to the Eisblock and perfectly crowns it. No GPU fan, No GPU Sound In addition to the increased performance, you have another advantage of water cooling in all situations: no annoying fans on your GPU and no excessive temperatures that make your graphics card howl. The Alphacool Eisblock Series completely replaces your GPU air cooler and helps you towards that silent system you've longed for. Compatible to ASUS Dual GeForce RTX 2080 Ti Advanced EVGA GeForce RTX 2080 Ti EVGA GeForce RTX 2080 Ti XC2 Ultra Gaming GIGABYTE GeForce RTX 2080 Ti GAMING OC 11G MSI GeForce RTX 2080 Ti Duke 11G OC, 11GB GDDR6 Nvidia Geforce RTX 2080Ti Founders Edition Zotac Gaming GeForce RTX 2080 Ti Blower, 11GB GDDR6 INNO3D GeForce RTX 2080 Gaming OC, 8GB GDDR6 Nvidia Geforce RTX 2080 Founders Edition ASUS Dual GeForce RTX 2070 OC, DUAL-RTX2070-O8G, 8GB GDDR6, (90YV0C82-M0NA00) EVGA GeForce RTX 2070 XC Ultra Gaming, 8GB GDDR6, (08G-P4-2173-KR) Gigabyte GeForce RTX 2070 Gaming OC 8G, 8GB GDDR6,(GV-N2070GAMING OC-8GC) MSI GeForce RTX 2070 Aero 8G, 8GB GDDR6, (V373-002R) For complete compatibility, see this PDF ATTENTION: The cooler is only compatible with connections with a maximum thread length of 5 mm. Technical Details Material Bottom: Nickel-plated Copper Material Cover: Acetal Dimensions (LxWxH): 263,70 x 120,01 x 23,50mm Thread: 1/4" Connector: 3Pin ARGB (5V) Scope of Delivery Alphacool Eisblock GPX-N 2080/2080Ti M02 Backplate SLI Terminal Thermal Compound and Pads Mounting Material

Individual, yet suitable for everyone. Minimalistic, yet full of elegance. High Performance and made for your next project: The Alphacool Eisblock GPX! Style Meets Performance Alphacool has already created a name for itself with its Eisblock GPX series among modders, gamers and performance enthusiasts. Alphacool offers several models to fit many NVIDIA® graphics card layouts, so there's something for everyone. For the first time the Eisblock GPX Plexi Light and Plexi is equipped with ARGB (Addressable RGB) lighting. Also, for all fans of simplicity Alphacool also offers the classic acetal version, which lets your GPU stay sleek and beautiful with a minimalistic noble design. Only the Best for You The Alphacool Eisblock series is based on completely nickel-plated copper bottoms, which are made from a single block of copper. The flow is optimised by the generous water channels in the best possible way so that they have been finely tuned to dissipate the heat. Thanks to the full cover design, all coolers have the performance to cool your GPU during all gaming and heavy-duty activities in the best possible way. This gives your hardware a longer life and protects it optimally. The included backplates puts the finishing touches to the Eisblock and perfectly crowns it. Individually Tuned to Your System Thanks to new ARGB technology, you can customise the Eisblock Plexi and Plexi Light more than ever before. These 5V addressable RGB LED´s can be connected to the Alphacool EIscontrol Controller ( 1015857 , sold separately). Whether you like it colourful like a mystical unicorn or if you just want a single colour. The Eisblock with ARGB lighting makes it possible. With the Eisblock Plexi variant you can see the fluid running through your water block and with the Alphacool Eiswater your gaming system is the eyecatcher at every LAN party. No GPU fan, No GPU Sound In addition to the increased performance, you have another advantage of water cooling in all situations: no annoying fans on your GPU and no excessive temperatures that make your graphics card howl. The Alphacool Eisblock Series completely replaces your GPU air cooler and helps you towards that silent system you've longed for. Compatible to ASUS ROG Strix GeForce RTX 2080 OC, ROG-STRIX-RTX2080-O8G-GAMING, 8GB GDDR6, 2x HDMI, 2x DP, USB-C (90YV0C60-M0NM00) ASUS ROG Strix GeForce RTX 2080 Advanced, ROG-STRIX-RTX2080-A8G-GAMING, 8GB GDDR6 ASUS ROG Strix GeForce RTX 2080, ROG-STRIX-RTX2080-8G-GAMING, 8GB GDDR6 ATTENTION: The cooler is only compatible with connections with a maximum thread length of 5 mm. Technical Details Material Bottom: Nickel-plated Copper Material Cover: Acrylic (Plexi) Thread: 1/4" Connector: 3Pin ARGB (5V) Scope of Delivery Alphacool Eisblock GPX-N Plexi Light RTX 2080 M08 Backplate SLI Terminal Thermal Compound and Pads ARGB Cable Mounting Material Manual Datasheet

With the new NexXxoS GPX coolers Alphacool is again a step ahead! Optimum performance and quality in a new cooling design for a great price! A new sophisticated injection system means the GPU is actively cooled. All other chips are sufficiently cooled by the passive cooler which is also in contact with the watercooling block for extra efficiency. The patented technology “Philips structure” from the Alpha NexXxoS XP in 2004, was further developed improving the base plate. The Fins and channel structure has been further refined. The fins are now 0.5 x 0.5 mm and 2.5 mm high. This enables a very large and rapid heat transfer from the copper to the coolant. SLI mode: The inlet and outlet are positioned of easy use in SLI mode. Up to four graphics cards can also be connected with the Alphacool GPX SLI connector. Back plate: The GPX range always Includes a back plate which uses small passive fins to cool rear of the graphics card. Cooling fins: The passive front plate cooling uses 18mm deep cooling fins that cover the rest of the graphics card completely. Graphics card not included Compatible: ASUS GeForce GTX 1070 Founders Edition GTX1070-8G 8GB GDDR5 (90YV09V0-U0NA00) EVGA GeForce GTX 1070 ACX 3.0 8GB GDDR5 (08G-P4-6171) EVGA GeForce GTX 1070 Founders Edition 8GB GDDR5 (08G-P4-6170) EVGA GeForce GTX 1070 SC Gaming ACX 3.0 8GB GDDR5 (08G-P4-6173) Gainward GeForce GTX 1070 8GB GDDR5 (3750) Gainward GeForce GTX 1070 Founders Edition 8GB GDDR5 (3637) GIGABYTE GeForce GTX 1070 Founders Edition 8GB GDDR5 (GV-N1070D5-8GD-B) Inno3D GeForce GTX 1070 Founders Edition 8GB GDDR5 (N1070-1DDN-P5DN) Inno3D GeForce GTX 1070 Twin X2 8GB GDDR5 (N1070-1SDN-P5DN) Inno3D iChill GeForce GTX 1070 X3 8GB GDDR5 (C107V3-1SDN-P5DNX) Inno3D iChill GeForce GTX 1070 X4 8GB GDDR5 (C107V4-1SDN-P5DNX) KFA² GeForce GTX 1070 8GB GDDR5 (70NSH6DHK6VK) KFA² GeForce GTX 1070 Founders Edition 8GB GDDR5 (70NSH6DHXXNK) MSI GeForce GTX 1070 Aero 8G 8GB GDDR5 MSI GeForce GTX 1070 Aero 8G OC 8GB GDDR5 (V330-011R) MSI GeForce GTX 1070 Founders Edition 8GB GDDR5 (V801-1290R) Palit GeForce GTX 1070 Founders Edition 8GB GDDR5 (NE51070015P2F) PNY GeForce GTX 1070 Founders Edition 8GB GDDR5 (GF1070GTX8GEPB) Zotac GeForce GTX 1070 Founders Edition 8GB GDDR5 (ZT-P10700A-10P) ASUS GeForce GTX 1080 Founders Edition GTX1080-8G 8GB GDDR5X (90YV09W0-U0NA00) Colorful GeForce GTX 1080 8GB GDDR5X ELSA GeForce GTX 1080 Ye-Batch Edition 8GB GDDR5X (GD1080-8GERXT) EVGA GeForce GTX 1080 8GB GDDR5X (08G-P4-5180) EVGA GeForce GTX 1080 ACX 3.0 8GB GDDR5X (08G-P4-6181) EVGA GeForce GTX 1080 Founders Edition 8GB GDDR5X (08G-P4-6180) EVGA GeForce GTX 1080 SC Gaming ACX 3.0 8GB GDDR5X (08G-P4-6183) Gainward GeForce GTX 1080 Founders Edition 8GB GDDR5X (3620) GIGABYTE GeForce GTX 1080 Founders Edition 8GB GDDR5X (GV-N1080D5X-8GD-B) Inno3D GeForce GTX 1080 Founders Edition 8GB GDDR5X (N1080-1DDN-P6DN) Inno3D GeForce GTX 1080 HerculeZ Twin X2 8GB GDDR5X (N1080-1SDN-P6DN) KFA² GeForce GTX 1080 8GB GDDR5X (80NSJ6DHK5VK) KFA² GeForce GTX 1080 Founders Edition 8GB GDDR5X (80NSJ6DHXXNK) MSI GeForce GTX 1080 Aero 8G 8GB GDDR5X MSI GeForce GTX 1080 Aero 8G OC 8GB GDDR5X (V336-015R) MSI GeForce GTX 1080 Founders Edition 8GB GDDR5X (00801-1289R) Palit GeForce GTX 1080 Founders Edition 8GB GDDR5X (NEB1080015P2F) PNY GeForce GTX 1080 Founders Edition 8GB GDDR5X (VCGGTX10808PB-CG) Zotac GeForce GTX 1080 Founders Edition 8GB GDDR5X (ZT-P10800A-10P) EVGA GeForce GTX 1080 SC Gaming ACX 3.0, 8GB GDDR5X, DVI, HDMI, 3x DisplayPort (08G-P4-6183-KR) Scope of delivery: 1x VGA cooler 1x Back plate Thermal pads Thermal Compound mounting material configurator for VGA cooler. The installation manual can be downloaded here compatibility list Nvidia

This thermally conductive pad is ideally suited to be used with the kryoM.2 Adapter board (between M.2 SSD module and passive heat sink or water block). It is made from soft, silicone based material. Technical Details Dimensions: ca. 70 x 20 x 1.0 mm Maximum gap to be filled: 1.0 mm Not electrically conductive Scope of delivery One thermally conductive pad

With the new NexXxoS GPX coolers Alphacool is again a step ahead! Optimum performance and quality in a new cooling design for a great price! A new sophisticated injection system means the GPU is actively cooled. All other chips are sufficiently cooled by the passive cooler which is also in contact with the watercooling block for extra efficiency. The patented technology “Philips structure” from the Alpha NexXxoS XP in 2004, was further developed improving the base plate. The Fins and channel structure has been further refined. The fins are now 0.5 x 0.5 mm and 2.5 mm high. This enables a very large and rapid heat transfer from the copper to the coolant. SLI mode The inlet and outlet are positioned of easy use in SLI mode. Up to four graphics cards can also be connected with the Alphacool GPX SLI connector. Back plate The GPX range always Includes a back plate which uses small passive fins to cool rear of the graphics card. Cooling fins The passive front plate cooling uses 18mm deep cooling fins that cover the rest of the graphics card completely. Graphics card not included Compatible Gigabyte GeForce GTX 1660 Ti OC 6G, 6GB GDDR6, (GV-N166TOC-6GD) Scope of delivery 1x VGA cooler 1x Back plate Thermal pads Thermal Compound mounting material configurator for VGA cooler. Datasheet The installation manual can be downloaded here compatibility list Nvidia

With the new NexXxoS GPX coolers Alphacool is again a step ahead! Optimum performance and quality in a new cooling design for a great price! A new sophisticated injection system means the GPU is actively cooled. All other chips are sufficiently cooled by the passive cooler which is also in contact with the watercooling block for extra efficiency. The patented technology “Philips structure” from the Alpha NexXxoS XP in 2004, was further developed improving the base plate. The Fins and channel structure has been further refined. The fins are now 0.5 x 0.5 mm and 2.5 mm high. This enables a very large and rapid heat transfer from the copper to the coolant. SLI mode The inlet and outlet are positioned of easy use in SLI mode. Up to four graphics cards can also be connected with the Alphacool GPX SLI connector. Back plate The GPX range always Includes a back plate which uses small passive fins to cool rear of the graphics card. Cooling fins The passive front plate cooling uses 18mm deep cooling fins that cover the rest of the graphics card completely. Graphics card not included Compatible Gigabyte Aorus GeForce RTX 2060 Xtreme 6G [Rev. 1.0], 6GB GDDR6, HDMI, 3x DP, USB-C (GV-N2060AORUS X-6GC) Scope of delivery 1x VGA cooler 1x Back plate Thermal pads Thermal Compound mounting material configurator for VGA cooler. Datasheet The installation manual can be downloaded here compatibility list Nvidia

With the new NexXxoS GPX coolers Alphacool is again a step ahead! Optimum performance and quality in a new cooling design for a great price! A new sophisticated injection system means the GPU is actively cooled. All other chips are sufficiently cooled by the passive cooler which is also in contact with the watercooling block for extra efficiency. The patented technology “Philips structure” from the Alpha NexXxoS XP in 2004, was further developed improving the base plate. The Fins and channel structure has been further refined. The fins are now 0.5 x 0.5 mm and 2.5 mm high. This enables a very large and rapid heat transfer from the copper to the coolant. SLI mode The inlet and outlet are positioned of easy use in SLI mode. Up to four graphics cards can also be connected with the Alphacool GPX SLI connector. Back plate The GPX range always Includes a back plate which uses small passive fins to cool rear of the graphics card. Cooling fins The passive front plate cooling uses 18mm deep cooling fins that cover the rest of the graphics card completely. Graphics card not included Compatible Gigabyte GeForce GTX 1660 Ti Gaming OC 6G, 6GB GDDR6, HDMI, 3x DP (GV-N166TGAMING OC-6GD) Scope of delivery 1x VGA cooler 1x Back plate Thermal pads Thermal Compound mounting material configurator for VGA cooler. The Datasheet can be downloaded here The installation manual can be downloaded here compatibility list Nvidia

The classic Alphacool NexXxoS GPX cooler combines high quality with excellent cooling performance. Every NexXxoS GPX cooler comes with a backplate that not only serves the optics but also actively increases the cooling performance. Powerful GPU Cooling! The well-known GPX-Solo GPU cooler is the foundation of the NexXxoS GPX cooler. It is equipped with the latest nozzle technology in combination with a nickel-plated copper cooling plate that has cooling fins that are arranged in a cross-slot structure. This design allows fast heat transfer from the GPU via the cooling plate to the water. The Voltage Transformers Are Passively Cooled? At first glance, the large aluminium cooler with its fins up to 18 mm high is a passive heat sink. But that's not quite true. In fact, the Alphacool NexXxoS GPX cooler is a state-of-the-art hybrid cooler that also uses the air flow in the case for cooling. As well as this, thhe GPX-Solo cooler not only rests on the GPU, but also on the aluminium cooler. The direct contact allows the heat from the aluminium body to be cooled with water. This means that the voltage converters and graphics memory are not only passively cooled. Rather, the water flow in the GPX Solo is used to actively support the aluminium cooler in cooling the remaining components. Thus, the voltage converters and the graphics memory achieve significantly better temperatures than any air cooler. To put the cherry on the cake, fluid never touches the aluminium, so there is never any problems! Is the Backplate Included? Yes, the backplate is always included with the Alphacool NexXxoS GPX coolers. The backplate is not only used to stabilize the PCB but it is also in direct contact with the backplate via thermal pads. The fine cooling fins on the back of the backplate support the cooling of the graphics card. Is Sli Operation Possible? Alphacool offers a whole range of GPX SLI adapters for the NexXxoS GPX coolers. There are different sizes for different distances of the graphics cards. SLI connectors for three or four graphics cards are also available. Grafikkarten-Konfigurator: click here Kompatibilitätsliste: Nvidia cooler Download manual PDF : Alphacool NexXxoS GPX - Nvidia Geforce GTX 1660 Ti M04 Download data sheet PDF : Alphacool NexXxoS GPX - Nvidia Geforce GTX 1660 Ti M04