Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 unshielded RJ-45 ports category 5e. Application of IDC/LSA connectors, provides fast and easy installation. - 24 unshielded RJ-45 ports category 5e. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 1U. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: black RAL9004.
The wAP R is a small weatherproof 2.4Ghz wireless access point with a miniPCI-e slot (so you can use your own LTE card) and LTE antennas. Unit comes with one 10/100 Ethernet LAN port for your wired devices. The weatherproof device can be mounted outside your house, in the vehicle, on your porch or anywhere else where you need wireless access from your phone or computer. It also includes a desktop stand so you can put it inside the building near a window. Unit has the several powering options - 9-30V PoE-in by Ethernet port, DC jack and automotive connector, very handy in mobile devices like car, bus or train. RBwAPR-2nD - wAP R - Included Parts Ethernet test resultsRBwAPR-2nDQCA9531 100M one port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)8.198.423.596.3173.688.9Bridging25 bridge filter rules8.198.423.596.370.936.3Routingnone (fast path)8.198.423.596.3160.882.3Routing25 simple queues8.198.423.596.390.846.5Routing25 ip filter rules8.198.423.596.343.222.1
The wAP 60G and wAP 60G AP are weatherproof integrated 60GHz wireless units, that can be used indoors or outdoors in different scenarios - Base Station (only wAP 60G AP), Point-to-Point and CPE (wAP 60G AP and wAP 60G). The box includes a wall mounting kit, straps for pole mounting, power supply, PoE injector and also table stand for using the device indoors. Penetrates some windows depending on material. wAP 60G AP and wAP 60G allows to create high-speed Point-to-Multipoint setup setup in 60 GHz frequency that is not affected by the crowded WiFi spectrum. In such scenario, wAP 60G AP (comes with RouterOS L4 license for AP connections and 60 degrees antenna) can be used as Base Station / Access Point. wAP 60G AP supports up to eight simultaneous clients (wAP 60G with L3 license) on distances of 100m+. RBwAPG-60ad-A - Included Parts
The LHG mount is a basic pole mount adapter for LHG series products.• Simple and low cost.• Supports all LHG series, products, including LHG XL.• Made from metal.• Package also includes a U-bolt and a K-58 mounting kit.
Sporting a sleek industrial design, the U Fiber WiFi is a robust, high‑performance GPON CPE that features an informational LED display with 4 Ethernet ports and WiFi. Features: High-Performance GPON CPELED diodes for easy diagnosticsUp to 2.4 Gbps Downstream and 1.2 Gbps UpstreamSupports up to 20 km GPON LinksPowerful Layer 2/3 Management FeaturesGPON WAN Port4x RJ45 Gigabit LAN PortSC/APC Fiber Connector802.11n Wi‑Fi Status LEDs The easy-to-read LEDs provide status information: Ethernet connection, signal strength, and power.Versatile Power The 4 Ethernet LAN ports support 10/100/1000 Mbps connections. The UFiber WiFi can be powered using 24V passive PoE on Port 1, or by 24VDC. Designed for Integration Up to 128 UFiber WiFi devices can be connected to a single GPON port. Supporting GPON links of up to 20 km, the UFiber WiFi integrates with the UFiber OLT and third-party OLT devices.
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 0.25 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: must
Lanberg’s crimping tool for pass-through RJ45 is an essential product intended for any installer, who has, on a daily basis, contact with the ICT and telecommunications network wiring. This device (with its double arms) can be used for crimping all kinds of cable connectors such as RJ-11, RJ-12 and RJ-45 and RJ-45 pass through. On top of that, this convenient tool has a built-in additional insulation stripper intended. Due to the special ratchet mechanism, insufficient pressure placed connectors can be prevented. All in all, this tool’s simplicity and multi-functionality of this device, allows it to meet the expectations of both amateurs and professional, when it comes to crimping network cable connectors.
Netgear 10 Gigabit SR SFP+ Module. Andmete edastamise maksimaalne määr: 10000 Mbit/s, Kaabeldustehnoloogia: 10Gbase-SR. Ühenduvustehnoloogia: Juhtmega ühendatud. Maksimaalne ülekandekaugus: 300 m. Liides: LC
netFiber 9 is a powerful outdoor switch with SFP SFP+ and Gigabit Ethernet. It features a powerful ARM v7 CPU 256 MB of RAM 4x 10G SFP+ ports and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in so you don’t have to rely on the DC jack for powering in tight hard-to-reach spots. There is a console port followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why Mikrotik designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet.There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws so you can attach the netFiber to a pole wall or mast right away.netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports a powerful CPU and a rugged case netFiber 9 is a real bargain that will make your network management so much easier!
Lenovo GX90X21431. Hostiliides: USB 3.2 Gen 2 (3.1 Gen 2) Type-C, Jaoturi liidesed: USB 3.2 Gen 2 (3.1 Gen 2) Type-A. Andmeedastuskiirus: 20 Mbit/s, Toote värv: Must, Kaabli pikkus: 0,1 m. Laius: 233 mm, Sügavus: 37 mm, Kõrgus: 12 ...
A longer version of our 100 Gigabit QSFP28 direct attach cable. This cable is 3 meters long – the perfect length to reach all the necessary spots while keeping your server room neat and tidy. Connect any two MikroTik 100 Gigabit heroes (CCR2216 & CRS504) without a hassle - this cable has integrated QSFP28 modules. Just plug it in and enjoy the speed! The cable is 3 meters long – the perfect length to reach all the necessary spots while keeping your server room neat and tidy. It is fairly flexible – you can keep your devices apart or on top of each other.
