Powerful 10Gbps and Layer 3 Routing Solution for Enterprise Backbone and Data Center Networking PLANET SGS-6341-24T4X is a Layer 3 Stackable Managed Gigabit Switch that provides high-density performance, Layer 3 static routing, RIP (Routing Information Protocol) and OSPF (Open Shortest Path First) with 10Gbps uplink interfaces delivered in a rugged, strong case. The administrator can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the 10G network efficiently. Besides, with 128Gbps switching fabric, the SGS-6341-24T4X can handle extremely large amounts of data in a secure topology linking to backbone or high capacity servers for ISP and enterprise VoIP, video streaming, and multicast applications. High Performance 10Gbps Ethernet Capacity The four SFP+ slots built in the SGS-6341 series supports dual-speed, 10GBASE-SR/LR or 1000BASE-SX/LX. With 10Gbps uplink interfaces, the SGS-6341 series boasts a high-performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 128Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Central IP Stacking Management Positioned as the distribution or aggregation layer switch for large networks, the SGS-6341 series supports IP stacking function that helps network managers to easily configure up to 24 switches in the same series via one single IP address instead of connecting and setting each unit one by one. The IP Stacking technology groups PLANET SGS-6341 switch series together to enable centralized management through a single unit, regardless of physical location or switch type, as long as they are connected to the same local network. High Reliability Hardware Stacking Two of the 10G SFP+ ports are used to connect several SGS-6341 series for building a virtually logical facility. The SGS-6341 series gives the enterprises, service providers and telecoms flexible control over port density, uplinks and switch stack performance. The SGS-6341 series can connect as a ring for redundancy and ensures that data integrity is retained even if one switch in the stack fails. You can even hot-swap switches without disrupting the network, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Redundant Ring, Fast Recovery for Critical Network Applications The SGS-6341 Series supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology and Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in harsh environments. In a certain simple Ring network, the recovery time could be less than 50ms to quickly bring the network back to normal operation. Layer 3 Routing Support The SGS-6341 series enables the administrator to conveniently boost network efficiency by configuring Layer 3 static routing manually, and the RIP or OSPF settings automatically. The RIP can employ the hop count as a routing metric and prevent routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination. The OSPF is an interior dynamic routing protocol for autonomous system based on link state. The protocol creates a database for link state by exchanging link states among Layer 3 switches, and then uses the Shortest Path First algorithm to generate a route table based on that database. Strong Multicast The SGS-6341 series supports abundant multicast features. In Layer 2, it features IPv4 IGMPv1/v2/v3 snooping and IPv6 MLD v1/v2 snooping. In Layer 3 multicast protocols, it features IGMPv1/v2/v3 and DVMRP. With Multicast VLAN Register (MVR), multicast receiver/sender control and illegal multicast source detect functions which make the SGS-6341 series great for any robust networking. Full IPv6 Support The SGS-6341 series provides IPv6 management and enterprise-level secure features such as SSH, ACL, WRR and RADIUS authentication. It thus helps the enterprises to step in the IPv6 era with the lowest investment. In addition, you don’t need to replace the network facilities when the IPv6 FTTx edge network is built. Robust Layer 2 Features The SGS-6341 series can be programmed for basic switch management functions such as port speed configuration, port aggregation, VLAN, Multiple Spanning Tree Protocol, WRR and bandwidth control. This switch provides 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol functions. By supporting port aggregation, the SGS-6341 series allows the operation of a high-speed trunk combined with multiple ports. Excellent Layer 2 to Layer 4 Traffic Control The SGS-6341 series is loaded with powerful traffic management and WRR features to enhance services offered by telecoms. The WRR functionalities include wire-speed Layer 4 traffic classifiers and bandwidth limitation which are particularly useful for multi-tenant unit, multi-business unit, Telco, or network service applications. It also empowers the enterprises to take full advantage of the limited network resources and guarantees the best in VoIP and video conferencing transmission. Powerful Security The SGS-6341 series supports ACL policies comprehensively. The traffic can be classified by source/destination IP addresses, source/destination MAC addresses, IP protocols, TCP/UDP, IP precedence, time ranges and ToS. Moreover, various policies can be conducted to forward the traffic. The SGS-6341 series also provides IEEE 802.1x port based access authentication, which can be deployed with RADIUS, to ensure the port level security and block illegal users. Efficient and Secure Management For efficient management, the SGS-6341 Managed Gigabit Switch series is equipped with console, Web and SNMP management interfaces. With its built-in Web-based management interface, the SGS-6341 series offers an easy-to-use, platform-independent management and configuration facility. The SGS-6341 series supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For reducing product learning time, the SGS-6341 series offers Cisco-like command via Telnet or console port and customer doesn’t need to learn new command from these switches. Moreover, the SGS-6341 series offers secure remote management by supporting SSH connection which encrypts the packet content at each session. Intelligent SFP Diagnosis Mechanism The SGS-6341-24T4X supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. High Availability Mesh Networking Solution for Big Data System With highly-flexible, highly-extendable and easy-to-install features, the SGS-6341-24T4X series offers up to 128Gbps data exchange speed via optical fiber interface and the transmission distance can be extended to 120km. The SGS-6341-24T4X series features strong, rapid, self-recovery capability to prevent interruptions and external intrusions. It incorporates IEEE 802.1s MSTP (Multiple Spanning Tree Protocol, spanning tree by VLAN) into customer’s automation network to enhance system reliability and uptime. The SGS-6341-24T4X is the ideal solution for data centers, service providers and telecoms to build redundant connection and establish high bandwidth for Big Data server farm. Excellent Solution to Core/Data Center Security and QoS Switch The SGS-6341-24T4X series performs 128 Gigabits per second non-blocking switch fabric, so it can easily provide a local 10Gbps high bandwidth Ethernet network for the backbone of your department. With the four built-in SFP+ ports, the SGS-6341-24T4X series provides the uplink to the backbone network through the 10G Ethernet LR/SR SFP+ modules. It further improves the network efficiency and protects the network clients by offering the security and QoS features. Layer 3 VLAN Routing With the built-in robust Layer 3 traffic routing protocols, the SGS-6341-24T4X ensures reliable routing between VLANs and network segments. The routing protocols can be applied via VLAN interface. The SGS-6341-24T4X is certainly a cost-effective and ideal solution for enterprises.
Cat.6 U/FTP flat network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.Cat.6 cable for operating frequencies up to 250MHz using the shielded version with foil shielded single pair shielding (U/FTP). Designed as flat ribbon cable for use in environments with restricted or limited installation space. Suitable for use in Gigabit Ethernet networks. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.The very fleixible and thin ribbon cable construction allows the cables to be installed in restricted or limited spaces.Available lengths: 0.3m, 1m, 2m, 3m, 5m, 10m.Available colours: Black, Grey, White.
LogiLink's Cat.6A PUR patch cable is especially suitable for use in industrial environments. The abrasion-resistant sheath made of durable polyurethane (PUR) protects against external influences such as heat, oil, moisture, UV rays and other adverse influences .This high quality cable is suitable for fixed network installation and occasional free movement in dry and damp environments, and outdoors at low mechanical stress. This cable is not waterproof and not suitable for underground!
Tootja: Lanberg Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 (8P8C) Wiring type: CAT5E Lisaandmed: Set of 20 tk of unshielded RJ-45 [8P8C] cat. 5E võrguseade plugs, intended mainly, for UTP LAN kaablid. värv: Transparency
FMB130 is ADVANCED tracker with internal GNSS, GSM antennas, configurable digital/analogue inputs/negative input/impulse inputs, three DOUT outputs, Bluetooth connectivity and backup battery.Teltonika keeps its promise to make IoT Easy. FMB130 device is the first device with negative input possibility. It allows you to save your precious integration time while connecting accessories like vehicle door sensor, alarm button, seatbelt detection and similar sensors or accessories.Additionally, we have integrated possibility to enable Impulse Input for fuel flow meter data reading. Impulse based fuel usage control is much more accurate than different kind of fuel level sensors and enables possibility to be precise if needed. It is perfect solution for high fuel usage machines like cranes, construction vehicles, mining machines, agriculture equipment.We have added one additional Digital Output. Now it is 3 of them in total! It is not surprising that DOUT is the most popular connection type on FMB1 family devices. It`s allows you to use simultaneously 3 different DOUT scenarios like: immobilizer, buzzer, alarm lights, door lock and others.New FMB130 is the first advanced vehicle tracking system with programmable DIN/AIN/Negative/Impulse input. First input has following choices: Digital, Analog, Negative, Impulse. Second input may be Digital or Analog.With these new features you can have one tracking system for much wider range of use cases. Module Name Teltonika TM2500 Technology GSM/GPRS/GNSS/BLUETOOTH GNSS GNSS GPS, GLONASS, GALILEO, BEIDOU, QZSS, AGPS Receiver Tracking: 33 Tracking sensitivity -165 dBM Accuracy < 3 m Hot start < 1 s Warm start < 25 s Cold start < 35 s Cellular Technology GSM 2G bands Quad-band 850 / 900 / 1800 / 1900 MHz Data transfer GPRS Multi-Slot Class 12 (up to 240 kbps), GPRS Mobile Station Class B Data support SMS (text/data) Power Input voltage range 10 - 30 V DC with overvoltage protection Internal Back-up battery 170 mAh Li-Ion battery 3.7 V (0.63 Wh) Bluetooth Specification 4.0 + LE Supported peripherals Temperature and Humidity sensor, Headset, OBDII dongle, Inateck Barcode Scanner, Universal BLE sensors support Physical specification Dimensions 65 x 56,6 x 20,6 mm (L x W x H) Weight 55 g Operating environment Operating temperature (without battery) -40 °C to +85 °C Storage temperature (without battery) -40 °C to +85 °C Operating humidity 5% to 95% non-condensing Ingress Protection Rating IP41 Battery charge temperature -0 °C to +45 °C Battery discharge temperature -20 °C to +60 °C Battery storage temperature -20 °C to +45 °C for 1 month-20 °C to +35 °C for 6 months Interface Digital Inputs 3 Negative Inputs 1 (Digital Input 2) Impulse Inputs 2 (Digital Input 1, Digital Input 2) Digital Outputs 3 Analog Inputs 2 CAN Adapter inputs 1 1-Wire 1 GNSS antenna Internal High Gain GSM antenna Internal High Gain USB 2.0 Micro-USB LED indication 2 status LED lights SIM Micro-SIM + eSIM Memory 128MB internal flash memory Features Sensors Accelerometer Scenarios Green Driving, Over Speeding detection, Jamming detection, GNSS Fuel Counter, DOUT Control Via Call, Excessive Idling detection, Immobilizer, iButton Read Notification, Unplug detection, Towing detection, Crash detection, Auto Geofence, Manual Geofence, Trip Sleep modes GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep Configuration and firmware update FOTA Web, FOTA, Teltonika Configurator (USB, Bluetooth), FMBT mobile application (Configuration) SMS Configuration, Events, DOUT control, Debug GPRS commands Configuration, DOUT control, Debug Time Synchronization GNSS, NITZ, NTP Fuel monitoring LLS (Analog), LV-CAN200, ALL-CAN300, CAN-CONTROL, ODBII dongle Ignition detection Digital Input 1, Accelerometer, External Power Voltage, Engine RPM (CAN Adapters, OBDII dongle)
IEEE 802.3bz 2.5GBASE-T standardile vastav ühendus. USB-C 3.1 ühendusliides 2,5GBASE-T toetab kuni 2,5 Gbit/s ühenduskiirust Ühildub olemasoleva Cat5e või parema kaabeldusega Toetab 802.1p (CoS) ja 802.1Q (VLAN) Kompaktne disain TRENDneti USB-C 3.1 to 2.5GBASE-T Ethernet adapter, mudel TUC-ET2G, on varustatud 2.5GBASE-T RJ-45 pordiga, mis pakub kõrgemaid gigabiti kiirusi, mis võimaldavad kuni 2.5Gbps olemasoleva Cat5e või parema kaabelduse kaudu. Sellel USB-C 2,5G Ethernet-adapteril on USB-C 3.1 liides, mis ühendab USB-C-võimelise sülearvuti hõlpsasti kiire 2,5GBASE-T võrguga. USB-C 3.1 Kasutage USB-C 2.5G Ethernet-adapterit, et hõlpsasti ühendada USB-C 3.1-toega sülearvuti. Integreeritud kaabel Integreeritud 12,6 cm (4,9 tolli) USB-C kaabel sobib enamiku paigalduste jaoks. 2,5GBASE-T port Varustatud 2,5GBASE-T RJ-45 pordiga, mis pakub kuni 2,5 Gbit/s gigabiti kiirust olemasoleva Cat5e või parema kaabli kaudu. USB-C 3.1 Kasutage USB-C 2,5G ethernet adapterit, et hõlpsasti ühendada 2,5GBASE-T võrku USB-C 3.1-toega sülearvutist. 2,5GBASE-T port Varustatud 2,5GBASE-T RJ-45 pordiga, mis pakub kuni 2,5 Gbit/s gigabiti kiirust olemasoleva Cat5e või parema kaabli kaudu. Integreeritud kaabel Integreeritud 12,6 cm (4,9 tolli) USB-C kaabel USB toiteallikaga USB-C 2,5G Ethernet-adapter saab toite USB-porti kaudu
Antaira LNX-0501G-SFP tööstuslikud Gigabit haldamata Ethernet-kommutaatorid on IP30-klassi ja DIN-riba paigaldatavad. Igas seadmes on neli gigabit Ethernet-porti ja üks kahe kiirusega (100/1000) SFP-pesa, mis muudab selle ideaalseks rakenduste jaoks, mis nõuavad suurt ribalaiust ja kaugsidet. LNX-0501G-SFP-seeria pakub kõrget EFT- ja ESD-kaitset, et vältida reguleerimata pingeid, ning sobib karmidesse keskkondadesse. See toetab toite redundantsi funktsiooni, kasutades topelt toitesisendi konstruktsiooni koos ümberpööratud polaarsuse kaitsega.Lisaks sellele hoiatab sisseehitatud relee hoiatusfunktsioon hooldajat voolukatkestuste või pordikatkestuste korral, lisaks blokeerib sisseehitatud täiustatud ringhäälingutormi kaitsefunktsioon kõik andmepaketid, mis ületavad määratletud piiri, kui need saabuvad porti, kuni kiirus väheneb madalama läveni.OmadusedVõrgu ringhäälingutormi kaitse4*10/100/1000Tx Fast Ethernet pordid ja 1*100/1000 SFP-pesaToetab Auto MDI/MDI-X funktsiooniStore-and-Forward lülitusarhitektuur10Gbps Back-Plane (Switching Fabric)8K MAC-aadresside tabel9.6Kbytes Jumbo Frame tugiÜlelaine kaitse: Toetus 3000 VDCESD-kaitse: VDC Toetus: 6,000 VDC ToetusUL klassi I, divisjoni 2 sertifikaatRedundantne toiteallika disain - 12 ~ 48 VDCSisseehitatud 1 relee väljund pordikatkestuse häire jaoksIP30 vastupidav alumiiniumist korpusDIN-riba ja seinakinnituse tugiTöötemperatuurivahemik - STD: -10° kuni 70° C5-aastane garantiiKomplektis1 x alalisvoolukaabel -18 AWG ja alalisvoolupesa 5,5x2,1 mm1 x LNX-0501G-SFP2 x seinakinnitus ja kruvid
CAT6A kaabel on muutumas paljude struktureeritud kaabeldusvõrkude valikukaabliks. CAT6A kaabel võimaldab edastada kuni 10 Gbps ja sellest on kiiresti saamas VoIP, CCTV ja andmevõrkude kaabeldustaristu.
CAT6A kaabel on muutumas paljude struktureeritud kaabeldusvõrkude valikukaabliks. CAT6A kaabel võimaldab edastada kuni 10 Gbps ja sellest on kiiresti saamas VoIP, CCTV ja andmevõrkude kaabeldustaristu.
CAT6A kaabel on muutumas paljude struktureeritud kaabeldusvõrkude valikukaabliks. CAT6A kaabel võimaldab edastada kuni 10 Gbps ja sellest on kiiresti saamas VoIP, CCTV ja andmevõrkude kaabeldustaristu.
