Patch cord cat.6A S/FTP LSZH 20m orange Double shielded for reliable connection LSZH coating - does not support combustion, does not emit toxic compounds Gold-plated contacts
PoE switch 16-port + 4 combo ports RJ45/SFP Dahua PFS3218-16ET-135 The Dahua PFS3218-16ET-135 16-port PoE Switch + 4 RJ45/SFP combo ports is a cost-effective Layer 2 PoE switch that has been developed for IP surveillance systems. The PFS3218-16ET-135 is equipped with 16 RJ45 10/100Mbps ports with PoE 802.3af/at (power over ethernet) support and 2 RJ45 Uplink 1 Gbps shared (Combo) ports with 2 SFP insert ports. The total PoE power budget for connected devices is 135W. The device supports IEEE 802.3af, IEEE 802.3at and Hi-PoE standards (first 2 ports). The Dahua PFS3218-16ET-135 PoE switch is equipped with features such as PoE Watchdog, port isolation capability, QoS for VIP ports and support for long-distance 250m mode. It uses 16 PoE ports that allow the target device to be powered with a power consumption not exceeding 30W (the exception being the first 2 ports with Hi-PoE support, which can supply up to 60W). The switch uses intelligent PoE ports, which continuously regulate power consumption in the event of an overload. If all powered devices exceed 135W, the switch will automatically disconnect the lowest priority communication port. Features PFS3218-16ET-135: Intelligent PoE PD Alive (PoE Watchdog) PoE transmission over long distances Smooth transmission Wide operating temperature: 10 to 55 ° C (14 ° F to 131 ° F) Port isolation
Superior ProcessingUbiquiti Networks introduces our proprietary INVICTUS™ core communications processing engine. The speed, power, and efficiency of this integrated circuit enhances the performance of airFiber AF5/AF5U.Efficient Use of 5 GHz BandairFiber AF5/AF5U features 1 MHz center channel resolution with market-leading Power Envelope Tracking technology. airFiber AF5/AF5U accurately and continuously controls transmit power relative to the band edge. The power level automatically tracks to optimize performance near band edges, allowing you to choose the part of the band with the least interference. Long-Range LinksNewly developed for airFiber AF5/AF5U, the patent-pending xRT feature uses an innovative, adaptive multi-channel coding scheme to enhance radio transceiver performance, thereby maximizing your link budget and spectrum utilization – while still maintaining regulatory compliance. This results in links that can span distances from 10 m up to 100+ km.Quick and Easy InstallationThe unique sliding-clamp design of airFiber AF5/AF5U allows mounting hardware to be pre-assembled prior to installation – no more dropped screws at the top of the tower. As an added convenience, the drop-in cradle mount design allows the installer to attach mounting hardware to the pole without having to support the weight of the airFiber radio during installation.Radio Alignment DisplayIntroduced on airFiber AF5/AF5U, the Radio Alignment Display (RAD) makes aiming quicker and easier. The dual, calibrated signal strength indicators display the actual signal strength on the local and remote airFiber radios in real time. The comprehensive array of radio status indicators display the following:• GPS synchronization status• Master/slave mode• RF link status• RF overload warning• Current modulation mode• Link activity and speed for wired management and data ports
Original part number 104-11 Product name Netrack patchpanel 19" 24 ports cat. 6 UTP LSA 0,5U, with shelf Producer Netrack Class of product Patchpanel 19"&10" Number of ports 24 Type of connector RJ45 Category 6 Wiring type UTP - unschielded twisted pair cable, 4 pairs Additional information for vertical mounting (ASA) 19"3 groups of 8 RJ45 jacks on the panelUTP RJ-45 jack from front sideKrone connector from rear sideconnector are described form rear side by port number and colour codingfor wiring please use the Krone-tool2 pcs of screws are required for assemblyshelf for cable management from rear side of patch panel- very strongbrush rail for attach each cablescrew terminals to attach each wire Height 0.5 U22 mm Width 19 inches480 mm Depth 105 mm Net weight 1 kg Colour Black
Original part number 104-10 Product name Netrack patchpanel 19" 24 ports cat. 5e UTP LSA 0,5U, with shelf Producer Netrack Class of product Patchpanel 19"&10" Number of ports 24 Type of connector RJ45 Category 5e Wiring type UTP - unschielded twisted pair cable, 4 pairs Additional information for vertical mounting (ASA) 19"3 groups of 8 RJ45 jacks on the panelUTP RJ-45 jack from front sideKrone connector from rear sideconnector are described form rear side by port number and colour codingfor wiring please use the Krone-tool2 pcs of screws are required for assemblyshelf for cable management from rear side of patch panel- very strongbrush rail for attach each cablescrew terminals to attach each wire Height 0.5 U22 mm Width 19 inches480 mm Depth 105 mm Net weight 1 kg Colour Black
Original part number 104-19 Product name Netrack patchpanel 19" 24 ports cat. 6A FTP, Krone IDC Producer Netrack Class of product Patchpanel 19"&10" Number of ports 24 Type of connector RJ45 Category 6A Wiring type FTP/STP - shielded 4 twisted-pair cable Additional information for vertical mounting (ASA) 19"3 groups of 8 RJ45 jacks on the panelFTP RJ-45 jack from front sideKrone connector from rear sideconnector are described form rear side by port number and colour codingfor wiring please use the Krone-tool2 pcs of screws are required for assemblyshelf for cable management from rear side of patch panel- very strongbrush rail for attach each cablewiring diagram Height 1 U Width 19 inches Depth 135 mm Net weight 1.6 kg Colour Black
Original part number 104-01 Product name Netrack patchpanel 19" 24 ports cat. 5e UTP LSA, with shelf Producer Netrack Class of product Patchpanel 19"&10" Number of ports 24 Type of connector RJ45 Category 5e Wiring type UTP - unschielded twisted pair cable, 4 pairs Additional information for vertical mounting (ASA) 19"3 groups of 8 RJ45 jacks on the panelUTP RJ-45 jack from front sideKrone connector from rear sideconnector are described form rear side by port number and colour codingfor wiring please use the Krone-tool4 pcs of screws are required for assemblyshelf for cable management from rear side of patch panel - very strongbrush rail for attach each cablescrew terminals to attach each wirefront panel is equipped with port identification field - white Height 1 U44 mm Width 19 inches480 mm Depth 110 mm Net weight 1.032 kg Colour Black
RouterBOARD 911G-5HPnD is equipped with an integrated Atheros 802.11a/n radios (2 MMCX connectors).It is thus predestined as a client unit. With support for Power over Ethernet is perfect for outdoor solutions.Contains RouterOS L3 license.Mikrotik RouterOS fully supports IPv6 network. There are these functions implemented in the current version:* Static address allocation and routing* Router advertisement daemon (the address autoconfiguration)* Dynamic routing: BGP +, OSPFv3, and RIPng protocol* Firewall (filter, Mangle, address lists)* DNS* 6in4 (SIT) tunnels* Telnet* Ping* Traceroute* Web proxy* Fetch and sniffer tools SpecificationsTX Power regulation yes (by 1 dBi)Max.output power 23 dBmSensitivity -92 dBmLAN port 1x 10/100/1000 Mbit/sPower supply POE (12-28)Operational temperature from -20°C up to 60°CDimension 105 x 105 mmWeight 0,09 kgInterface LAN, WiFi 802.11n 5 GHzSupported OS Mikrotik - RouterOS Level 3Procesor Atheros 600 MHzRAM 32MB DDR SDRAMNAND 64 MBSlots none
Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the NanoStation® M. The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors, along with integrated airMAX (MIMO TDMA protocol) technology and dedicated Wi-Fi management. The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost, high performance, and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy. Sleek Industrial Design The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry. Ethernet Connectivity Passive PoE (Pairs 4, 5+; 7, 8 Return)Management Wi-Fi Radio Each NanoStation AC loco model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Surge Protection The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
Deploy the UniFi nanoHD AP in high-density environments requiring maximum wireless performance and minimal footprint. The UniFi nanoHD AP features simultaneous, dual-band, 4x4 MU-MIMO technology and convenient 802.3af PoE compatibility.
