The APOE03G is the Single-Port Gigabit ( 10/100/1000 Base-T) redundant PoE Midspan/Injector that provides DC power for PoE equipped Network Appliance device. It is compatible with devices that support the IEEE 802.3af/at standard PoE power feed using Mode B (Pins 4/5 and 7/8). The APOE03G features terminal block for Power redundancy, the power redundancy ensures that vital network capabilities are always available when needed, and also makes life easier for any IT Administrator who just doesn't want to have his sleep or his weekend interrupted by an untimely service call caused by a finicky power supply. Function: Transform DC through RJ-45 cable PIN# 4,5,7,8, into remote devices such as Wireless AP, IP Phone, IP surveillance Camera, etc. With the terminal block connector can be connected to the UPS allowing redundancy in the power source. Key Features Input: 1.1 Input Voltage: 5Vdc to 57Vdc, Nominal = 48Vdc General Description: 2.1 Operation Temperature: -0 ~ 40 2.2 Storage Temperature: -20 ~ 60 2.3 Operation Humidity: 10% ~ 80% Non-Condensing 2.4 RJ-45 Connector PinOut 2.5 DC Power Plug Diameter: 2.1Ø / 5.5Ø , Length: 12 ± 0.5mm 2.6 DC Power Plug Polarity: Inside (+), Outside (-)
The APOE03GS is the Single-Port Gigabit ( 10/100/1000 Base-T) redundant PoE Midspan/Injector with Hi-Power sourge protection that provides DC power for PoE equipped Network Appliance device. It is compatible with devices that support the IEEE 802.3af/at standard PoE power feed using Mode B (Pins 4/5 and 7/8). The APOE03GS fetures surge protection for the data and power feeds for networks. The design utilizes three-pole differential Gas Tubes. The tubes feature ultra-low Line to Line and Line to Ground capacitance to minimize distortion of high-speed signals. The APOE03GS features terminal block for Power redundancy, the power redundancy ensures that vital network capabilities are always available when needed, and also makes life easier for any IT Administrator who just doesn't want to have his sleep or his weekend interrupted by an untimely service call caused by a finicky power supply. Function: Transform DC through RJ-45 cable PIN# 4,5,7,8, into remote devices such as Wireless AP, IP Phone, IP surveillance Camera, etc. With the terminal block connector can be connected to the UPS allowing redundancy in the power source. Key FeaturesInput:1.1 Input Voltage: 5Vdc to 57Vdc, Nominal = 48VdcGeneral Description:2.1 Operation Temperature: -0 ~ 402.2 Storage Temperature: -20 ~ 602.3 Operation Humidity: 10% ~ 80% Non-Condensing2.4 RJ-45 Connector PinOut2.5 DC Power Plug Diameter: 2.1Ø / 5.5Ø , Length: 12 ± 0.5mm2.6 DC Power Plug Polarity: Inside (+), Outside (-)PIN Define RJ-45 Input ( Data ) RJ-45 Output ( Data & Power )PINSymbolSymbol1TXRX A+TXRX A+2TXRX A-TXRX A-3TXRX B+TXRX B+4TXRX C+TXRX C+ DC+5TXRX C-TXRX C- DC+6TXRX B-TXRX B-7TXRX D+TXRX D+ DC-8TXRX D-TXRX D- DC-
The APOE03GR is the Single-Port Gigabit ( 10/100/1000 Base-T) redundant PoE Midspan/Injector with Reset function that provides DC power for PoE equipped Network Appliance device. It is compatible with devices that support the IEEE 802.3af/at standard PoE power feed using Mode B (Pins 4/5 and 7/8). The Reset button feature only work in certain AlfaModels. The APOE03GR features terminal block for Power redundancy, the power redundancy ensures that vital network capabilities are always available when needed, and also makes life easier for any IT Administrator who just doesn't want to have his sleep or his weekend interrupted by an untimely service call caused by a finicky power supply.** PD-side Reset circuit available upon request ** Function: Transform DC through RJ-45 cable PIN# 4,5,7,8, into remote devices such as Wireless AP, IP Phone, IP surveillance Camera, etc. With the terminal block connector can be connected to the UPS allowing redundancy in the power source. Key FeaturesInput:1.1 Input Voltage: 5Vdc to 57Vdc, Nominal = 48VdcGeneral Description:2.1 Operation Temperature: -0 ~ 402.2 Storage Temperature: -20 ~ 602.3 Operation Humidity: 10% ~ 80% Non-Condensing2.4 RJ-45 Connector PinOut2.5 DC Power Plug Diameter: 2.1Ø / 5.5Ø , Length: 12 ± 0.5mm2.6 DC Power Plug Polarity: Inside (+), Outside (-)PIN Define RJ-45 Input ( Data ) RJ-45 Output ( Data & Power )PINSymbolSymbol1TXRX A+TXRX A+2TXRX A-TXRX A-3TXRX B+TXRX B+4TXRX C+TXRX C+ DC+5TXRX C-TXRX C- DC+6TXRX B-TXRX B-7TXRX D+TXRX D+ DC-8TXRX D-TXRX D- DC-
Features:Solid color design, dirtproof and wear resistant.Flat wire design, not easy to be broken off.One-to-Two interface, convenient to use.Special male to female extension cord for car use.It is covered by premium PVC, durable. Description:60cm long size design, practical.A small accessory for you to use in daily life.Exquisite workmanship, high quality and reasonable price. Specifications:Material: PVC+tinned copper wireColor: blackSize: 60cm Package Included:1 x OBD Cable
Teltonika FMB204 is a SPECIAL waterproof (IP67) tracker with Bluetooth connectivity, internal high gain GNSS and GSM antennas and integrated high capacity backup battery. Device is designed to work longer without power supply. FMB204 with Li-ion battery can work up to 6 days in power saving mode. FMB204 is perfectly suitable for agriculture, delivery, refrigerated transport, trailers tracking, security & emergency services and even more. 6-30V power supply makes FMB204 suitable for motorbikes and water transport.ModuleNameTM2500TechnologyGSM/GPRS+GPS+BLUE-TOOTHGNSSGNSSGPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPSReceiver33 channelTracking sensitivity-165 dBMAccuracy< 3 mHot start< 1 sWarm start< 25 sCold start< 35 sCellularTechnologyGSM2G bandsQuad-band 850 / 900 / 1800 / 1900 MHzData transferGPRS Multi-Slot Class 12 (up to 240 kbps), GPRS Mobile Station Class BData supportSMS (text/data)PowerInput voltage range6 - 30 V DC with overvoltage protectionBack-up battery1800 mAh Li-Ion battery (0.49 Wh)Power consumptionAt 12V < 2,1 mA (Ultra Sleep), At 12V < 3,9 mA (Deep Sleep), At 12V < 4,2 mA (Online Sleep), At 12V < 15,7 mA (GPS Sleep), At 12V < 28,3 mA (nominal)Blue-toothSpecification4.0 + LESupported peripheralsTemperature and Humidity sensor, Headset, OBDII dongleInterfaceDigital Inputs3Digital Outputs2Analog Inputs11WIRE DATA11WIRE POWER1GNSS antennaInternal High GainGSM antennaInternal High GainUSB2.0 Micro-USBLED indication2 status LED lightsSIMSIMMemory128MB internal flash memoryPhysical specificationDimensions72,5 x 73 x 27,3 mm (L x W x H)Weight205 gOperating environmentOperating temperature-25 °C to +55 °CStorage temperature-40 °C to +70 °COperating humidity5% to 95% non-condensingIngress Protection RatingIP41, IP67FeaturesSensorsAccelerometerScenariosGreen Driving, Over Speeding detection, Jamming detection, DOUT Control Via Call , GNSS Fuel Counter, Immobilizer, Excessive Idling detection, Unplug detection, Towing detection, Crash detection, Auto Geofence, Manual Geofence, TripSleep modesGPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep SleepConfiguration and firmware updateFOTA Web, FOTA, FMB Configurator (USB, Blue-tooth), FMBT mobile application, BTAPP mobile applicationSMSConfiguration, Events, DOUT control, DebugGPRS commandsConfiguration, DOUT control, DebugTime SynchronizationGPS, NITZ, NTPFuel monitoringLLS (Analog)Ignition detectionDigital Input 1, Accelerometer, External Power Voltage, Engine RPMCertification & ApprovalsRegulatory EAC, RoHS, REACH
Specification: usable for all GentleBOXesgood fixation of a cableexcellent climate resistancemounting hole ø 20 mmblue coloureasy to use eternet cable with connector RJ45Material polyamid 6 - high lifetimeSeal material neopren - high lifetimeCable diameter ø 5 - 10 mmIP code IP68
Specification: usable for all GentleBOXesgood fixation of a cableexcellent climate resistancemounting hole ø 19 mmblue colourMaterial polyamid 6 - high lifetimeSeal material neopren - high lifetimeCable diameter ø 5 - 10 mmIP code IP68
The FlexiMount XL are pole and surface mount accessories that accommodate both vertical and horizontal pole mounting applications, as well as basic flat wall mounting where minimizing the distance of the radio, relative to the wall, is important. Compared to the FlexiMount, the FlexiMount XL boasts a stronger, more heavy-duty design, a longer pole length and base, and an increased articulation angle of 180º.Suitable for vertical, horizontal, and angled poles, Mimosa’s FlexiMounts are able to be mounted inany orientation.Mimosa’s FlexiMounts come preassembled, right out out the box. They are ready for any backhaul,access point, or radio to be attached to them.Mounting OptionsPole mount with two pipe clamp, or surface mount with two screw hole points.Assembly Pre-assembled with a white powder coated finish. Mounting screws and pipe/hose clamps not included
The quickMOUNT pro is a advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale. You can use the quickMOUNT pro with any pole mountable device or Mikrotiks small mounting clip with weight less than 1.5 kg.
Cabinet is a perfect solution for installation organization and storage of: IT equipment monitoring devices alarm systems TV networks local LAN networks all the other devices in non-standard housings and in any complexed configuration. Width 19" Height 12U Depth 600 mm Material powder coated steel Package size 635 x 590 x 120 mm
RC10-6U-300GBSTALFLEX's Hanging cabinet is a perfect solution for installation organization and storage of: IT equipment monitoring devices alarm systems TV networks local LAN networks all the other devices in non-standard housings and in any complexed Configuration. The new STALFLEX series of rack cabinets is distinguished by an extremely easy and intuitive assembly which definitely simplifies the installation process and makes them uncompetitive to the alternative products offered by other manufacturers!Functionality of the cabinets combined with solid execution of the STALFLEX's team makes this product ideally suited for protection of delicate devices against external factors and accidental mechanical damage.Brokable cable gland.An unquestionable advantage of STALFLEX rack cabinets is an easy-to-break out plug for cabling in their lower and upper part (each with dimensions: 80 mm x 40 mm +/-1/2 mm).This gives various possibilities for cable entry while ensuring convenient wiring installation and easy correct assembly of any devices.Doors easy to assemble.Additional installation comfort is ensured by the easy-to-install door with the option of choosing (right / left). The doors are closed with a patent lock (in the set with a set of two keys).The depth level of front brackets can be adjusted!In order to ensure maximum freedom in arranging the internal space of the cabinet the two front brackets are connected to its body by means of screws.It is a solution that allows mounting the brackets at one of three depth levels (spacing of the mounting holes every 30 mm).Mounting Holes.Holes in the back of the cabinet allow it to be hung with the use of dowels.Specially designed space for convenient assembly of devices.The interior of the cabinet is designed in such a way that after mounting the shelf with the maximum permissible depth there still is free space inside: about 30 mm in its rear part - developed specifically to facilitate the installation of wiring about 60 mm in its front part - to enable safe insertion of eg Ethernet connectors or fiber optics.An additional advantage of the Stalflex rack cabinet is the lack of a back wall which facilitates free use of its internal space.EASY INSTALLATION!The product is intended for self-assembly. By purchasing this product you get a complete assembly kit with the exact instructions and accessories necessary for proper assemble of the cabinet. Thanks to uncomplicated design Stalflex's rack cabinets are extremely easy fast and intuitive to install. Width 10" Height 6U Depth 300 mm Material powder coated steel Package size 335 x 157 x 345 mm External dimensions 300 x 292 x 300 mm
QuPS4Outdoor power socket & plug - 4 PIN set (pin and input/output)Outdoor power socket & plug 4 PIN set (2 pin for power and 2 pin for digital INPUT/OUTPUT) for all cases where the User doesn’t want to use Passive PoE powering feature in all QuWireless antennas or need access to digital INPUT/OUTPUT from outside of the QuRouter or antenna.
RSF10-1U-150BFixed shelf 10" 1U 150 mm Characteristics of this shelf allows to place in a cabinet a suitable Rack devices without mounting brackets.Great resistance and stability of its construction is obtained by use of high quality steel and best materials. Practical holesThe bottom of the shelf has openings that can be used to provide additional security for devices using cable ties what is more it do not block the air supply. Mounted to the front rack beams.
CRC19-9U-330GGRack cabinet corner STALFLEX 19" 9U 330 mm Glass GraySTALFLEX's Hanging cabinet corner is a perfect solution for installation organization and storage of: IT equipment monitoring devices alarm systems TV networks lokal LAN networks all the other devices in non-standard housings and in any complexed Configuration. In STALFLEX RACK corner cabinets we used a new solution to facilitate self-assembly and reduce the number of bolted elements. The used latch system speeds up assembly and ensures structural stability.Functionality of the cabinets combined with solid execution of the STALFLEX's team makes this product ideally suited for protection of delicate devices against external factors and accidental mechanical damage.Brokable cable glandAn unquestionable advantage of STALFLEX rack cabinets is an easy-to-break out plug for cabling in their lower and upper part (each with dimensions: 80 mm x 40 mm +/-1/2 mm).This gives various possibilities for cable entry while ensuring convenient wiring installation and easy correct assembly of any devices. Triple break-off cable culvert in the rear side of the cabinetsCorner cabinets are the only items to feature closed-off space in the rear to ensure better structural stability. However our designers considered the user experience as well and added three easy break-off plugs (each with dimensions: 60 mm x 50 mm +/- 1/2 mm) which are placed in the rear side of the cabinet.Construction that allows the installation of a fanIn the lower and upper part of the cabinet there is a dedicated space for a fan with dimensions: 120 mm x 120 mm (bolt spacing: 105 mm x 105 mm).Doors easy to assembleAdditional installation comfort is ensured by the easy-to-install door with the option of choosing (right / left). The doors are closed with a patent lock (in the set with a set of two keys).Mounting HolesHoles in the back of the cabinet allow it to be hung with the use of dowels.The depth level of front brackets can be adjustedIn order to ensure maximum freedom in arranging the internal space of the cabinet the two front brackets are connected to its body by means of screws. It is a solution that allows mounting the brackets at one of three depth levels (spacing of the mounting holes every 30 mm).Ventilation holesThe corner cabinet is equipped with additional ventilation holes in the upper and lower parts of the cabinet from the front and sides which cause the air circulation inside the cabinet smooth.Easy instalationThe product is intended for self-assembly. By purchasing this product you get a complete assembly kit with the exact instructions and accessories necessary for proper assemble of the cabinet. Thanks to uncomplicated design Stalflex's rack cabinets are extremely easy fast and intuitive to install.
Gigabit Power over Ethernet (PoE) injector 24V 0.5A 12W with IEC-320 C6 3 pin inlet for C5 series and A5x. Requires C5 3 pin power cord.Power cord not included!
STALFLEX's Hanging cabinet is a perfect solution for installation organization and storage of: IT equipment monitoring devices alarm systems TV networks local LAN networks all the other devices in non-standard housings and in any complexed configuration The new STALFLEX series of rack cabinets is distinguished by an extremely easy and intuitive assembly which definitely simplifies the installation process and makes them uncompetitive to the alternative products offered by other manufacturers! Functionality of the cabinets combined with solid execution of the STALFLEX's team makes this product ideally suited for protection of delicate devices against external factors and accidental mechanical damage.
APOE03G-C is the passive PoE adapter to power both R36A and Tube ethernet series through the single power source. With Tube ethernet series it give install flexible that can run 100 meters ethernet cable not like Tube USB series limit by 5-8 meters USB cable length.
