Dual-Radio Performance Gigabit Speeds The UniFi AC Pro AP delivers 5x the performance of the first-generation UniFi AP while still maintaining Ubiquiti’s disruptive pricing strategy. Sleek Ultra-Compact Design The UniFi AC Pro AP features a cleaner design in a reduced footprint – half the size compared to the standard UniFi AP. Scalable Enterprise Wi-Fi Management The UniFi Controller v4 software is a powerful enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities the UniFi virtual control plane allows for unlimited scalability under one centralized controller. Remotely access the UniFi Controller to upgrade deployed UniFi APs while in the field.
Remove the bottleneck from your network setup – it is time to upgrade that 1 Gigabit switch to something truly powerful and enjoy real speed. Introducing CRS312-4C+8XG-RM – our first product with 10G RJ45 Ethernet ports. Moreover, it also has 4 x 10G combo ports: use them for 10G RJ45 Ethernet or 10G SFP+, when you need an additional fiber connection. Combo ports can be used alongside the 8 regular 10G RJ45 Ethernet ports at all times. These ports can also be software selected, so you can use RouterOS scripting, to decide which combo ports will be active.This device is a practical solution for those who work with huge data files and need fast, capable connection 24/7: multimedia production, scientific research, game development, big data analysis and so on. CRS312-4C+8XG-RM has a dual power supply for redundancy – no unexpected downtime when the deadlines are looming. It has a full size USB, a console port for configuration and a 1U rackmount case – fits all the standard racks.You can choose between our legendary feature-packed RouterOS for booting or a simpler, but still powerful SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS.This switch has a great total non-blocking throughput of 120 Gbps, switching capacity of 240 Gbps and forwarding rate of 178 Mpps. CRS312-4C+8XG-RM – built for professionals, great for everyone!
Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology.For devices that support Plug & Play Mesh, this functionality is extended to allow multi-hop wireless uplink – so wirelessly uplinked APs can support uplink to other wirelessly uplinked APs.Indoors/Outdoors The UniFi AC Mesh AP includes adjustable dual-band omni antennas, and you have the option to use any 5 GHz omni antenna for spot-beam coverage in high‑density locations with numerous APs and clients, like a conference hall. Expand the limits of Wide-Area WiFi Welcome to UniFi Mesh Technology UniFi creates a highly scalable, end-to-end system of devices spanning multiple locations across theworld — all controlled by a single interface accessed via the Internet or local network.
TRM250TRM250 is an Industrial Cellular modem with multiple LPWAN connectivity options. It features NB-IoT, LTE Cat-M1 and is backwards compatible with EGPRS (2G). It offers an extremely long lifecycle and is the most flexible option when upgrading the connectivity of existing industrial equipment. TRM250 is equipped with a USB interface, a rugged aluminium housing and is designed for large scale IIoT deployments. The Industrial Cellular Modem TRM250 is a rugged, compact and extremely versatile connectivity device is able to provide cellular capabilities to equipment across IoT and Industrial IoT applications. This futureproof product features both NB-IoT and LTE Cat-M1 LPWAN communication options and is backwards compatible with 2G. This means that you can upgrade your existing infrastructure with a cost-efficient and reliable connectivity device which will adapt to the changing telecommunications environment and will enable you to use the best cellular M2M technologies for many years to come. Easy to deploy, easy to use and even easier to maintain, TRM250 comes with a USB interface for power & communication, drivers supporting all relevant platforms and one SMA connector for an external antenna to obtain better signal coverage.
CRS328-24P-4S+RM CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included). CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in. The device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W with high voltage, and 26 W with low voltage power output. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with our disruptive price, providing best price/performance on the market. Switching Features • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Broadcast storm control• Port mirroring of ingress/egress traffic• STR / RSTP / MSTP• Access Control List• MikroTik neighbour discovery• SNMP• 10218-byte jumbo frames support• IGMP snooping• SNMP v2/v3• rackmount• IEEE 802.3ad and static link aggregation Switching resultsCRS328-24P-4S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput95,238.148,761.915,037.661,594.05,201.663,167.8SwitchingNon blocking Layer 2 capacity95,238.197,523.815,037.6123,188.05,201.6126,335.5SwitchingNon blocking Layer 1 throughput95,238.164,000.015,037.664,000.05,201.664,000.0SwitchingNon blocking Layer 1 capacity95,238.1128,000.015,037.6128,000.05,201.6128,000.0 Ethernet test results CRS328-24P-4S+RM98DX3236A1 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.3987.3235962.6296151.6Bridging25 bridge filter rules81.3987.390.7371.590.946.5Routingnone (fast path)81.3987.3235962.6261.9134.1Routing25 simple queues81.3987.3112.6461.2111.557.1Routing25 ip filter rules59.8726.261.4251.559.530.5
The UniFi® NVR 4 is an enterprise network video recorder that integrates an NVR the UniFi Protect software and a 4-drive bay. The UNVR-4 unifies enterprise-class data protection and scalable storage with simple Plug and Play integration using the intuitive UniFi Protect software. From a desktop computer or mobile device you can access your surveillance recordings from virtually anywhere using the intuitive graphical user interface. The mobile app is available for iOS and Android-based devices. The drive bays are easily accessed from the front panel so hard drive mounting and maintenance are simple. Using four 8 TB drives in a RAID 5 configuration the UNVR-4 can provide up to 30 days of 4k video storage for 15 cameras or Full HD video storage for 50 cameras. Features: (4) 2.5"/3.5" Drive bays (1) 10G SFP+ port (1) Gigabit RJ45 port 1U rackmountable (kit included) Plug and Play UniFi Protect system with NVR Automated secure RAID 1 or RAID 5 configuration Supports USP-RPS for PSU failover
A preconfigured kit of two Cube 60Pro ac (802.11ay 60 GHz) devices: the Wireless Wire Cube Pro. Just point the Cubes at one another and power them on! They will form a blazing fast encrypted wireless connection. Pure plug-and-play!
Chateau LTE6 ax | Type Wireless Access Point | Wi-Fi 6 | USB | 4x10/100/1000M | 1x2.5GbE | Number of antennas 2 | Wireless Frequency Range 2.4-5Ghz | Dimensions 240 x 156 x 44 mm
CRS317-1G-16S+RM The new Cloud Router Switch 317-1G-16S+RM is a rack-mountable manageable switch with Layer3 features,it has 16 SFP+ ports for high performance 10GbE connectivity and a 1GbE copper port for management.CRS317-1G-16S+RM is powered by a next generation switching chip, giving you wire speed performance forall sixteen 10GbE ports with any Ethernet frame size. New features such as hardware-based Spanning TreeProtocol and Link Aggregation (LACP) provide enhanced protection and true professional performance for yourdemanding network. The unit has dual redundant power supplies and passive cooling case, so it’s completely silent - for hotenvironments two redundant fans will automatically keep the system cool if needed. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding,apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IPheader fields. SFP+ cages supports both 1.25 Gb SFP and 10 Gb SFP+ modules. SwOS Features Boot option for SwOS or RouterOS • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Web-based GUI• 800 Mhz CPU• Broadcast storm control• Port mirroring of ingress/egress traffic• Rapid Spanning Tree Protocol• Link Aggregation (LACP)• Access Control List• MikroTik neighbour discovery• SNMP v2/v3• rackmount and tabletop Switching resultsCRS317-1G-16S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput239,583.3122,666.737,828.9154,947.413,085.2158,906.4SwitchingNon blocking Layer 2 capacity239,583.3245,333.337,828.9309,894.713,085.2317,812.7SwitchingNon blocking Layer 1 throughput239,583.3161,000.037,828.9161,000.013,085.2161,000.0SwitchingNon blocking Layer 1 capacity239,583.3322,000.037,828.9322,000.013,085.2322,000.0
The ceiling AP on steroids! Mikrotik bestseller cAP is back – juiced up and stronger than ever. Compared to the previous cAP models the improved high-gain antenna increases the covered area by up to 100%!Need a nice-looking access point that won’t get in your way? Or perhaps you’re managing the network in a crowded place and don’t want everyone to have physical access to the device? Either way – ceiling is the answer! The device itself is pretty sleek - the low profile attracts less attention than a smoke detector. Your clients guests or colleagues won’t even notice it. But they will definitely notice the blazing fast wireless connection all across the premises.The new design features a larger high-gain antenna higher sensitivity and a built-in reflector. These improvements allow increasing the covered area by up to 100% compared to the previous cAP models!The dual-band dual-chain 2.4 and 5 GHz wireless radio provides a strong coverage in 360 degrees around it so you don’t have to worry about the placement of the device so much. Putting it on the ceiling eliminates many signal absorption problems such as the signal being blocked by large TV sets metal cubicle walls in open space offices etc.Even though the radio supports repeater mode the two Gigabit Ethernet ports give you the ability to extend your network with cables even if PoE power is required: the cAP XL ac supports 802.3af/at PoE input on the first port and passive PoE output (up to 57V) on the second port.
The Switch Pro Aggregation is a fully managed Layer 3 switch with (28) 10G SFP+ ports and (4) 25G SFP28 ports designed to enhance your network's switching capacity and performance by creating high-bandwidth aggregation links. This rack-mountable switch also offers 760 Gbps switching capacity and features a 1.3" LCM color touchscreen that concisely displays key system and connection insights.Additionally the Switch Pro Aggregation offers enhanced power supply failure protection when connected to the SmartPower Redundant Power System (USP RPS sold separately). This switch can be monitored or configured from anywhere with the powerful intuitive UniFi Network web application and mobile app.Managed with the UniFi Network application: Version 6.1.25 and laterю
5 Port PoE-Switch 802.3af/at PoE/PoE+ and 12-57 V passives PoE. Cloud Router Switch with 1 Gigabit Ethernet Port and 4 SFP+ Ports. Dualboot - RouterOS or SwOS.
RUT241 is the modified version of our all-time bestseller RUT240 that inherited its' best features, including industrial design, compact size, multiple connection interfaces, and compatibility with RMS. Equipped with 4G LTE, Wi-Fi, and two Ethernet ports, this router offers unstoppable connection continuity with a backup through automatic failover. Digital Inputs and Outputs coupled with advanced RutOS software enable solution automation scenarios. RUT241 is an excellent fit in various IoT and M2M solutions that require easy setup, reliable network, and remote accessibility.
RG-RAP1200(P), Reyee Wi-Fi 5 1267Mbps Wall-mounted Access Point Dual-radio performance, full gigabit wall-mounted access point Better experience with MU-MIMO under 802.11ac Wave2 Multi-service support with full gigabit ports Easy installation and full compatibility Optimization in one-click mode, achieving better Wi-Fi experience Easy Wi-Fi network construction within 3 minutes
QuMAX eXtra Range All In offers the most powerful directional LTE antenna of all QuWireless antennas. It is dedicated to connections with long distance to base station. It also has embedded Wi-Fi dual band 2.4 & 5 GHz omni antennas GPS antenna and Bluetooth antenna. It is designed to have Teltonika RUT240/950/955/X09/X11 router installed inside IP67 enclosure. It is the first choice for fixed installations in industrial environment. There is also space for mounting internal genuine Teltonika GPS and Wi-Fi antennas inside the antenna enclosure.
QuMax for Teltonika RUT240/230 Integrated outdoor multi band high power LTE directional antenna + outdoor Wi-Fi omni antenna + place to install Teltonika RUT240 or 230 (All-in-one) QuMAX offers the most powerful directional LTE antenna of all QuWireless antennas. It is dedicated to connections with long distance to base station. It is designed to have Teltonika RUT240 or RUT230 router installed inside IP67 enclosure. It is the first choice for fixed installations in industrial environment. It also has embedded outdoor Wi-Fi omni antennas. NOTE: For RUT230 one LTE antenna is unplugged. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support
New revision of Gigabit Ethernet Surge Protector in IP67 waterproof enclosureHere’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protectors on each end. They come sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm.Don’t forget about the grounding wire! Secure it to the rackmount mast or any other structure that is connected to the ground. For maximum protection you should use a surge protector on both ends of long cables.
Parameters Rated Value Single output power 20 W Input voltage range 100-240 VAC 50/60 Hz DC output voltage 12 V DC output current 0~1.67 A Output ripple and noise 120 mVp-p Line regulation ±1 % Load regulation ±1 % Efficiency 80 % Adjustable range for DC voltage ±1 % Test standard EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013EN55022:2010EN61000-3-2:2014EN61000-3-3:2013EN55024:2010/A1:2015 Inrush current Cold start current 20 A/ 115 VAC; 40 A/ 230 VAC Overload protection 105 % ~ 160 % cut off the output automatic recovery Over voltage protection 120 % ~ 140 % shut down O/P voltage re-power on to recover Setup rise hold up time 500 ms; 30 ms/ 230 VAC at full load; 1000 ms; 30 ms/ 115 VAC at full load Withstand voltage I/P-O/P: 1.5 kV; I/P-FG: 1.5 kV; O/P-FG: 0.5 kV 1 minute Isolation resistance I/P-O/P I/P-FG O/P-FG: 500 VDC/ 1000 MΩ Working temperature -10 °C ~ +50 °C Mounting options 35 mm DIN Rail Dimensions 22.5 x 90 x 100 mm Weight 190 g
Symmetrical Horn CC Antennas Gen2 offer unique RF performance in a compact package. Scalar horn antennas have symmetrical main beam with identical beam width in Vertical and Horizontal plane. Exceptionally small side lobes ensure remarkable interference suppression. HG3-CC Gen2 Antennas are ideal for coverage of areas with clients close to the installation site, where null zone issues exist. High density AP clusters and radio co-location is made possible due to unique radiation patterns and compact size.Symmetrical Horn CC Antennas Gen2 feature multiple improvements of RF performance and design, namely, optically lighter body and significantly improved bracket. Radome is made of more resistant material, and all of HG3-CC Gen2 antennas use only two radome sizes. HG3-CC Gen2 antenna is equipped with N-female connectors.90° Symmetrical Beam Antenna HG3-CC-S90Frequency Range: 5180 - 6400 MHzGain: 9.6 dBiAzimuth Beam Width -6 dB: H 60° / V 60°Elevation Beam Width -6 dB: H 60° / V 60°Mechanical Tilt: ± 25°Pole Mounting Diameter: 30 - 80 mmUnique Beam PerformanceSymmetrical Horn TP Antennas have a unique beam shape and characteristics. The beam section is circular: azimuth and elevation radiation angles are identical.N-type ConnectorsSymmetrical Horn Carrier Class Antennas feature N-type female connectors, used with wide range of Radios. For example, mimosaTM, Cambium NetworksTM PMP450, LigoWaveTM, and many others. Users of UBNTTM Rocket M5 Titanium, MikroTikTM connectorized radios (NetBoxTM, BaseBoxTM and NetMetalTM) can also utilize coaxial ports on Carrier Class Symmetrical Horn Antennas.
