Gross depth (mm): 160.00 mm Gross height (mm): 190.00 mm Gross weight: 1.00 kg Gross width (mm): 130.00 mm Net weight: 0.80 kg Packing quantity: 1 pc(s) Plastic (No PET): 16.00 g Tare weight (kg): 0.20 kg Volume (m3): 0.00 m³ Producer product name: ETS-T50A-FSS Other features: The ETS-T50 AXE Silent Edition is a high-performance CPU cooler with a cooling capacity up to 230W TDP and leading innovative technologies. The asymmetric design with five 6 mm heat pipes with the Heat Pipe Direct Touch technology ensures a quick heat transfer and allows the installation of high RAM modules. The cooler is equipped with a 14cm ENERMAX fan with patented Twister Bearing™ technology Processor brand name: Intel, AMD Type: CPU Air Cooler Supported processor sockets: intel LGA 775, 115x, 1366, 2011(-3) Square ILM, 2066. AMD FM1, FM2(+), AM2(+), AM3(+), AM4 Thermal Design Power (TDP): 230 W Heatsink dimensions (W x D x H): 135.2 x 65 x 160 mm Number of heat pipes: 5x Ø 6mm. Copper Heat Pipes/ Aluminium Fins Bearing technology: Twister Bearing Fan dimensions (W x D x H): 140 x 140 x 25 mm Fan speed (min): 500 RPM Fan speed (max): 1000 RPM Fan connector: 4-pin PWM Noise level: 13-22 dB Airflow: 29.78 – 94.21CFM
Toote kirjeldus inglise keeles:The eponymous "Wing Boosts", small increases on the impeller intake side, reduce air turbulence. The fan therefore works quieter at higher speeds than conventional fan designs would allow. The triple set offered here consists of three fans including RF receiver, splitter cables and remote control for controlling and synchronizing the three fans included in the set.The features of the Alpenföhn Wing Boost 3 ARGB fan at a glance:- Three 140-millimeter fans with digitally addressable RGB lighting- Hydrodynamic bearing for high performance, quiet operation and long life- Optimized rotor blades deliver the perfect balance between contact pressure and airflow- Speed range from 400 to 1,050 rpm- 4-pin PWM and 3-pin RGB connector- Including RGB and PWM splitter, RF remote control and receiver as well as screws- ASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion and ASRock PolychromeWing Boost 3 ARGB: Powerful 140mm fanThe Wing Boost 3 ARGB is a 140mm PWM-controlled fan that is equally well-suited for mounting on enclosures, processor coolers and radiators. The fan operates in a speed range between 400 and 1,050 revolutions per minute, achieving a delivery volume of 100.6 m³ / h and a static pressure of 2.19 mm H2O.The hydraulic bearing, which reduces friction noise to a minimum, and the rubber decouplers in the fan frame ensure whisper-quiet operation, even at low revs. Under full load, the Wing Boost 3 ARGB produces a maximum noise level of 19 decibels.Addressable RGB LED lighting in the frameThe Alpenföhn Wing Boost 3 ARGB is equipped with digitally addressable RGB LED lighting. The manufacturer has two 16.8-million-color rings integrated into the fan frame, which throws a slight light on the impeller and can be connected via a 3-pin RGB connector to the motherboard or corresponding controllers. The Wing Boost 3 RGB is compatible with ASUS Aura, Gigabyte RGB Fusion, ASRock Polychrome RGB and MSI Mystic Light.In addition to the three fans of the Alpenföhn Wing Boost 3 ARGB model, this kit also includes all the accessories needed to synchronize the PWM signal and the RGB LED lighting of the three fans. The lighting can be controlled via the enclosed remote control.Technical details:- Dimensions: 140 x 140 x 25 mm (W x H x D)- Material: plastic, rubber- Color: black fan, frame), gray (decoupler)- Volume: max. 19 dB (A)- Speed: 400 - 1,050 rpm- Delivery volume: max. 100.6 m³ / h- Static pressure: 2.19 mm H2O- Voltage: 12V- Voltage range: 7 - 13.2 V- Rated power: 1.32 W- Input current: 0.11 A.Connection:- 4-pin PWM- 3-pin RGB (5VDG)- Lighting: RGB (16.8 million colors)Delivery:- 3x Alpenföhn Wing Boost 3 RGB- 12x screws for housing- 12x screws for radiator- 1x RF remote control- 1x RF receiver- 1x RGB splitter- 1x PWM splitter
Tootekood: R-AK400-BKNNMD-G-1GTIN: 6933412727798Jahutid ja lisad
Intel: LGA1700/1200/1151/1150/1155 AMD: AM5/AM4 Product Dimensions: 127×123×155 mm Heatsink Dimensions: 120×45×152 mm Net Weight: 802 g Heatpipe: diam. 6 mm×4 pcs Fan Dimensions: 120×120×25 mm Fan Speed: 500~1650 RPM±10% Fan Airflow: 59.46 CFM Fan Air Pressure: 1.62 mmAq Fan Noise: less than 28 dB(A) Fan Connector: 4-pin PWM Bearing Type: Fluid Dynamic Bearing Fan Rated Voltage: 12 VDC Fan Rated Current: 0.1 A Fan Power Consumption: 1.2 W
The CORSAIR iCUE H100i ELITE CAPELLIX XT Liquid CPU Cooler offers superior, high-performance cooling for your CPU, featuring CORSAIR AF RGB ELITE fans, a 240mm radiator, and brilliantly bright CAPELLIX LEDs. It is compatible with a wide range of sockets, including Intel: 1700, 1200, 1150, 1151, 1155, 1156, 2011, 2066, and AMD: AM4, sTRX4, sTR4, ensuring broad compatibility with various CPU models.
120-mm-Hochleistungslüfter, Interlocking-Daisy-Chain-Technologie, 28 mm Tiefe für verbesserte Leistung, LCP-Lüfterblätter zur Reduzierung von Vibrationen, verbessertes Motordesign, flüsterleiser Betrieb
TUF Gaming TF120 ARGB chassis fan delivers high performance and durability in a rainbow of color. - Class-leading airflow, and low noise levels. - Advanced fluid dynamic bearing provides up to 250,000 hours of operation. - PWM control: ultra-wide RPM range allows optimal cooling for all types of workloads. - Anti-vibration pads reduce fan noise by damping rattling and vibration. - A double-layer LED array produces deeper color saturation and more lighting effects than conventional RGB fans. - Aura Sync compatibility lets you coordinate colors and lighting effects with a huge range of hardware.
Die Kryonaut-Wärmeleitpaste wurde speziell für die extrem anspruchsvollen Anwendungen und die höchsten Ansprüche der Overlocking-Community entwickelt. Kryonaut empfiehlt sich auch als Top-Produkt für kritische Kühlsysteme im Industriebereich. Speziell für Overclocking Exzellente Wärmeleitfähigkeit Keine Aushärtung Hohe Langzeitstabilität Nicht elektrisch leitend
CENTRALISED CABLE MANAGEMENT The case fan hub can be placed freely in the housing. It is connected to your motherboard with just one cable. This means you can do without many additional cables and lay them freely in the invisible part of the housing. SYNCHRONOUS FAN CONTROL Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub. The RPM of the first fan slot are read out and returned to your system. EXPAND YOUR VENTILATION Even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots. EXTERNAL POWER SUPPLY The fans are powered directly from your power supply via Sata Power. As a result, there is no voltage loss at the fan speed and smooth, smooth operation is made possible. Technical Data Packaging Width: 55.6 mm Height: 86.3 mm Length: 14.3 mm Weight: 0.075 kg
OPTIMISED FOR STATIC PRESSURE During the development of the new P8 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM PST is particularly suitable for use on heatsinks and radiators. MORE EFFICIENT TECHNOLOGY The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P8 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance. MAXIMUM QUIETNESS, MINIMUM VIBRATION Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. EXTENDED LIFE SPAN A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Therefore Arctic extends the warranty to 10 years. 200 TO 3000 RPM REGULATED VIA PWM PST Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed. HIGH QUALITY BEARING Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Technical Data Performance Fan Speed: 200 - 3000 rpm Airflow: 23.4 CFM / 40.3 m³/h Static Pressure: 1 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard Controll Typ: PST Connector: 4-Pin Connector + 4 Pin Socket Fan Bearing: Fluid Dynamic Bearing Electric Characteristics: Typical Voltage: 12 V DC Starting Voltage: 0 V Current: 0.09 A Cable Lenght: 400 mm Size & Weight Lenght: 80 mm Width: 80 mm Height: 25 mm Weight: 81 g
The CORSAIR iCUE H150i ELITE CAPELLIX XT Liquid CPU Cooler provides powerful, high-performance cooling for your processor, with CORSAIR AF RGB ELITE fans, a 360mm radiator, and ultra-bright CAPELLIX LEDs.
Elevate your PC's cooling efficiency and aesthetic appeal with the Deepcool AK400 Digital White CPU Air Cooler. This sleek and modern cooler, featuring a gross weight of just 0.99 kg and dimensions that ensure a snug fit in most cases, is designed to stand out with its crisp white finish. Compatible with a variety of sockets including 1200, 1151 (H4), 1150 (H3), and AM5, it offers versatility and high performance for a wide range of CPU models. With a 24-month warranty, the AK400 is a reliable and stylish choice for keeping your system cool and running smoothly.
Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2™ multi-socket mounting system, Noctua’s proven NT-H1 thermal compound and full 6 years manufacturer’s warranty, the NH-C14S is a premium quality top-flow solution for the highest demands.SobilikProtsessorTüüpJahutiVentilaatori läbimõõt14 cmToetatud protsessoripesadPistikupesa AM2, Pistikupesa AM2+, Pistikupesa AM3, Socket AM3+, Socket FM1, Socket FM2, Socket FM2+, LGA 1151 (Socket H4), LGA 2011-v3 (Socket R)Pöörlemiskiirus (min)300 RPMPöörlemiskiirus (max)1500 RPMMaterjalAlumiinium, VaskPinge12Laius140 mmSügavus163 mmKõrgus115 mmKaal820 gVentilaatori mõõdud (laius x sügavus x kõrgus)140 x 140 x 25 mmMüratase19,2 dB
Tootekood: R-LS720-BKNNMM-G-1GTIN: 6933412728412Jahutid ja lisad
Immerse your gaming rig into the realm of silence and efficiency with the DeepCool LS720S Zero Dark 360mm AiO Liquid CPU Cooler. This masterpiece from Deepcool, designed for the enthusiast, features a 360mm radiator, ensuring exceptional heat dissipation for even the most intense gaming sessions. Compatibility is a breeze, supporting a wide range of sockets including 1200, 1150, AM5, AM4, 1151, 1700, and 1155, making it a versatile choice for various builds. Additionally, with a 24-month warranty, the DeepCool LS720S Zero Dark is not just a cooling solution, but a commitment to quality, ensuring your gaming adventures stay cool, quiet, and uninterrupted.
CL-W285-PL12SW-A, LGA1150/LGA1151/LGA1155/LGA1156/SAM2+/SAM3/SAM3+/SAM4/SFM1/SFM2/SFM4, Fan speed 3300, Air flow 59.28 cfm, Noise level, max 28.2 dB, Dimensions 153x 120 x 27 mm, Weight 0.0955 kg
Conceived for industrial heavy duty applications that require enhanced cooling performance and advanced ingress protection, the NF-A14 industrialPPC (Protected Performance Cooling) is a ruggedised high-speed version of the award-winning retail model. Thanks to the outstanding aerodynamic efficiency of the NF-A14 design and the use of a novel three-phase motor, the industrialPPC version provides superior airflow and pressure capacity while keeping noise levels and power consumption moderate as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the NF-A14 industrialPPC suitable for operation in challenging environments, the renowned SSO2 bearing technology guarantees an MTBF of over 150.000hrs. Topped off with Noctua’s trusted reliability and 6 years manufacturer’s warranty, the NF-A14 industrialPPC is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.
