Featuring advanced aerodynamic design measures such as Flow Acceleration Channels and Noctua’s AAO frame, the NF-A6x25 FLX is a highly optimised, premium quality quiet fan in 60x25mm size. Smooth Commutation Drive technology and Noctua’s reference class SSO2 bearings guarantee superb running smoothness and excellent long-term stability. Topped off with modular cabling, Low-Noise Adaptors and 6 years manufacturer’s warranty, the NF-A6x25 is a premium choice for the highest demands.Flow Acceleration ChannelsThe NF-A6x25 impeller Featuress suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. buttonReduced Motor Hub SizeThanks to its streamlined, compact motor design, the NF-A6x25’s motor hub is smaller than with conventional 6cm fans. This allows for more blade surface area and thus contributes to the NF-A6x25’s superior airflow and pressure performance.AAO FrameNoctua’s AAO (Advanced Acoustic Optimisation) frames Features integrated anti-vibration pads as well as Noctua’s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan’s performance/noise efficiency. buttonStepped Inlet DesignNoctua’s Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space restricted environments. buttonInner Surface MicrostructuresWith the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. buttonIntegrated Anti-Vibration PadsIntegrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of mi
IMPRESSIVE ILLUMINATION, SUPERIOR COOLING Pure Loop 2 FX 240mm is the very high-performing and silent All-in-One water cooling unit with impressive ARGB illumination. Very high cooling performance for all mainstream CPUs 2 Light Wings 120mm PWM high-speed fans offer equally high air pressure and vibrant ARGB illumination Doubly decoupled PWM pump for quiet operation and minimal vibration ARGB-PWM-Hub enables synchronization of up to 6 ARGB components and PWM fans Combination of ARGB illumination, all-black design and aluminum-style for unmistakable and stylish look Easy-to-access refill port and included coolant bottle guarantee a long lifespan 3-year manufacturer’s warranty
The Protium expansion tank from Singularity Computers is a 250mm tube with a diameter of 60mm. Together with the acrylic attachments, the expansion tank reaches a height of 289mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 × 60 x 289 mm (L x W x H) Diameter: 60 mm Material: acrylic (reservoir, lid, base), aluminium (retention rings) Color: transparent, black/li> Ports: 7x G1/4" Scope of delivery: 1x 250 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
Tootekood: BFF-SXTR-12025W-RPGTIN: 4712883215049Jahutid ja lisad
With the introduction of dual frame design of the BitFenix Spectre Pro series we raised the standards of system fans to a new level. The new BitFenix Spectre Xtreme fans offer many features redefining the standards of cooling fans. Spectre Xtreme gives you the best performance and aesthetics using the latest in cooling fan technology and innovative designs.Cooling fans used in liquid cooling systems not only need to have a high airflow but also they need to be optimised for static pressure. The newly designed blades of the Spectre Xtreme not only look good but also improve the airflow of the fan to 66CFM while maintaining optimum static pressure. This makes the Spectre Xtreme fans an ideal choice for liquid cooling solutions.BitFenix Spectre Xtreme is engineered to provide an extremely silent performance. Use of high quality Fluid Dynamic Bearings have reduced the noise levels while increasing the efficiency and life expectancy of the fans. Carrying on the signature dual frame design of the Spectre series, the new Spectre Xtreme frame design provides a high level of noise dampening due to the use of TPU the construction of the frame. The result is a fan that can operate at different fan speeds from 950RPM to 2000RPM.The aggressively designed Spectre Xtreme comes in a wide variety of colours and options. The black Spectre Extreme comes without any installed LEDs, while the Blue, Green, Red and White ones do. Special care has been taken to match the Green LED with the light emitted from NVIDIA GeForce GTX stock coolers. Adding to the customizability of the Spectre Xtreme, the illuminations can be toggled with the jumper cable.SobilikUniversaalneTüüpVentilaatorVentilaatori läbimõõt12 cmPöörlemiskiirus (min)950 RPMPöörlemiskiirus (max)2000 RPMMüratase (suur kiirus)30 dBMaksimaalne õhuvool66 cfmMaksimaalne õhusurve2,74 mmH2OVentilaatorite arv1 ventilaator(id)Toote värvMust, ValgeMaterjalPolükarbonaat, Termoplast-polüuretaan (TPU)ValgustusLEDValgustuse värvValgeVõimsustarve (tüüpiline)3,36 WPinge12Nimivool0,28 ALaius120 mmSügavus120 mmKõrgus25 mmKaasas kruvidJah
Schicker zylindrischer Ausgleichsbehälter, Röhre aus transparentem Acryl, Aufsätze mit mattem Finish, drei Aufsätze für flexible Anschlussmöglichkeiten, schwarze Sicherungsringe aus Aluminium
Hightech compact fans with bionic loop rotor (BionicLoopFan®). The special wing shape triggers turbulence in the air. This physical effect reduces the volume which is based on turbulances in the air flow and reduces energy consumption. With a straightened air flow and a higher Airflow these fans usually offers a higher overall cooling capacity over classical fans . Welcome to the future! - 100% developed in Germany - TÜV-certified sound level specifications = real data - extremely low-noise bionic loop rotor - bionic deep sound fan frame - position-invariant magnetic bearing NB-NanoSLI® 2 NEW! - silent NB-EKA P2 Drive NEW! - Bayer® Makrolon® rotor with anti-dust technology - weighted reinforced fibreglass PBT frame - NB cable management with two pluggable connection cables - Perfect results for PC casing, CPU cooling systems and radiator( higher cooling power at same revolution ratel) Technical Details: Dimensions: 140 x 140 x 25mm Number of Revolutions: 900 rpm Connection: 3 Pin Start / nominal voltage: 4.5V / 12V Volume: 16.9 dB(A) Performance: 109.2 m³ Scope of Delivery: 4 fine thread screws and knurled nuts for tool free assembly 4 NB silicone slics for vibration-free assembly each 2x 20 and 50 cm connection cable with textile sheath
The Alphacool Eisbaer Pro Aurora CPU AIO water cooler is a special development for processors with particularly large CPU dies. These include the AMD Threadripper and Epyc processors and the Intel CPUs for the LGA 3647 socket. With the optional XPX Pro AM4 mounting bracket, the Alphacool Eisbaer Pro CPU cooler can also be used on AMD Ryzen processors. Large cooling surface The cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42 mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. With the included AM4 bracket, cooling an AMD Ryzen processor is also child's play. The cooling fins are 0.4 mm thick and also have an optimal distance of 0.4 mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3 mm thick, which allows the heat to reach the water and be dissipated as quickly as possible. Copper radiator As per usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water bearing components such as the antechambers, the cooling fins and the cooling channels to which the fins are soldered. The connection threads are made of brass for strength reasons. In addition, the cooling fins are only lightly painted. On closer inspection the copper shimmers through a little. A thick lacquer coating would result in a reduction of the cooling capacity. The fin density is at optimal 15FPI. Therefore the radiator works perfectly even at low airflow. A too high fin density would require fans with higher speed to achieve the same cooling capacity. A lower fin density would no longer benefit from fast rotating fans. So the golden mean was chosen. Real water cooling The Eisbaer Pro Aurora consists almost entirely of actual water cooling components. The extremely robust and durable TPV hoses are used in the enterprise products for servers and workstations. The hose connections also come from the Enterprise series from Alphacool and use the standard G1/4". This makes the Eisbaer Pro Aurora fully compatible with all common water cooling products. The quick-release fastener allows easy expansion of the AIO with additional components. The most important of these are the prefilled radiators and the Eiswolf GPU AIO water cooling system. Fan and lighting The entire Eisbaer Aurora Pro cooler is equipped with addressable digital RGB LEDs. This gives a real eye-catcher in the Case. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. Of course all Digital RGB LEDs can be controlled at will. Depending on the controller almost all effects are possible. How to connect everything The fans are normally controlled via a 4-pin PWM connector. An included Y-adapter for the fans makes it easy to connect them to the mainboard. This allows all fans to be controlled and regulated via one connector. Each fan has a 3-pin JST connector including Y-adapter for the LED illumination. This allows the fans to be connected directly together and can also be controlled simultaneously via a controller. For the connection to a typical 3-pin 5V connector a corresponding adapter is included. Alternatively, the included Digital RGB controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard. The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market. Data radiator L x W x H 390 x 120 x 30 mm (+/- 3%) Material cooling fins Copper Material chambers Copper Material cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Data cooler and pump L x W x H 64 x 79 x 54,3 mm Number of LEDs 10x Digital RGB LEDs Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ (+ 1x Fillport G1/4“) Pump typ DC-LT Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow rate 75 L/h Voltage 12V DC Power consumption 4W MTBF 50.000 h Data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Net weight 187 g Max working temperature 60 °C Certificates CE, FC, ROHS Compatibility list: - Intel: 1700 / 2011 / 2011-3 / 2066 / 3647 Narrow & Square / LGA 4189 - AMD: AM4 / TR4 / sTRX4 / SP3 / sWRX8
The nickel-plated adapter in the color shiny black couples two tubes, which do not run on a common straight line and provides at the adapter for a bend of 90 degrees. Two rubber rings seal both sides. The adapter is especially well compatible with Bitspower's Crystal Link Tubes. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Black Angle: 90 ° Connections: 2x Ø 12 mm
FQ141 represents SilverStone’s pursuit of a design that balances performance and tranquility. Its included PWM module allows motherboard to control fan speed and regulate the temperature inside your chassis with optimal efficiency. It has custom designed dual fan blades for increased air pressure performance without additional noise. These features not only improve ventilation but also decrease operating noise.SobilikArvuti korpusTüüpVentilaatorVentilaatori läbimõõt14 cmToetatud protsessoripesadEi ole toetatudÜhilduvad protsessoriseeriadEi ole toetatudPöörlemiskiirus (min)500 RPMPöörlemiskiirus (max)1000 RPMMüratase (aeglane kiirus)14,7 dBMüratase (suur kiirus)20,7 dBMinimaalne õhuvool31,4 cfmMaksimaalne õhuvool62 cfmMinimaalne õhusurve0,28 mmH2OMaksimaalne õhusurve1,21 mmH2OKeskmine tõrkeintervall (MTBF)150000 hToote värvSinine, ValgeMaterjalPlastPinge12Nimivool0,11 AVentilaatori mõõdud (laius x sügavus x kõrgus)140 x 140 x 25 mmVentilaatori kaal133 g
The Protium reservoir from Singularity Computers is a 200mm tube with a diameter of 60mm. Together with the acrylic attachments, the reservoir reaches a height of 239mm. It has a total of seven G1/4" ports and the tube itself is made of acrylic. Technical Data: Dimensions: 60 x 60 x 239 mm (L x W x H) Diameter: 60 mm Material: Acrylic (lid, base, reservoir), Aluminium (retention rings) Color: Black, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 200 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
The Protium expansion tank from Singularity Computers is a 250mm tube with a diameter of 60mm. Together with the acrylic attachments, the expansion tank reaches a height of 289mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data Dimensions: 60 × 60 x 289 mm (L x W x H) Diameter: 60 mm Material: acrylic (reservoir, lid, base), aluminium (retention rings) Color: transparent, silver Ports: 7x G1/4" Scope of delivery: 1x 250 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
The Protium D5 pump housing from Singularity, is designed to enclose a D5 pump. Not only to look elegant, but above all to minimise pump noise. There are also openings in the cover, which are intended for cable routing. Technical Data Dimensions: 75 x 57 x 75 mm (B x H x T) Colour: Silver Material: Aluminium / Steel
Technical details: Dimensions: 120 x 120 x 25mm Nominal speed: 1250rpm Airflow: max 87m³/h Voltage range: 4,5-13,8V Power consumption: 1,2 W Pressure: 0,891 mmH²O MTBF (25°C): 140 000h Temperature range: -10°C - +80°C Autostart time: 3-5sec Warranty: 6 years Extent of delivery: Noiseblocker NB-Multiframe MF12-S2 ( integrated vibration absorbers ) Dieses Produkt wurde für Sie getestet: Review-Base
Optimised for Static Pressure During the development of the new P14 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM PST is particularly suitable for use on heatsinks and radiators. More Efficient Technology The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P14 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance. Maximum Quietness, Minimum Vibration Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years. 200 to 1700 RPM regulated via PWM PST With a wide range of regulation and the PWM Sharing Technology (PST), the P14 PWM PST fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed. High Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Technical Data Performance Fan Speed: 200 - 1700 rpm Airflow: 72.8 CFM/ 123.76 m³/h Static Pressure: 2,40 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard Controll Typ: PST Connector: 4-Pin Connector + 4 Pin Socket Fan Bearing: Fluid Dynamic Bearing Electric Characteristics Typical Voltage: 12 V DC Starting Voltage: 3.9 V Current: 0.12 A Cable Lenght: 400 mm Size & Weight Lenght: 140 mm Width: 140 mm Height: 27 mm Weight: 194 g
ROG Ryuo III 240 all-in-one CPU liquid color with Asetek 8th gen pump solution, Anime Matrix LED Display and ROG ARGB cooling fans. - The latest 8th gen Asetek pump is armed with a 3-phase motor that delivers ultimate cooling performance with higher flow and lower impedance - The ASUS-exclusive Anime Matrix™ is a mini LED array that can display ROG-exclusive anime content, core system stats, and customized animations - Premium ROG ARGB fans offer high airflow and optimized noise levels - Aluminum components and vacuum coating provide high durability and flagship aesthetics - The ROG Ryuo series is styled to complement the ROG motherboards at the heart of a high-end build Package Content: 1 x CPU Liquid Cooler (pre-applied thermal compound) 2 x 120 mm Radiator Fan 1 x 1-to-2 Fan Splitter Cable 1 x 1-to-4 ARGB Splitter Cable 1 x Accessory Pack of Screws and Brackets 1 x Quick Start Guide 1 x ROG Sticker 1 x ROG cable organizer
Content: 5 ml (for 10 to 20 applications) Application temperature: -20 ° C to 110 ° C Red color Curing time: 30 min at 20 ° C Typical application: CPUs, GPUs, notebooks, ICs