Stylische Sleeves von CableMod, für Hydro-AiOs von Corsair & EVGA & NZXT, Textil-Sleeving aus ModMesh-Material, einfache Installation in wenigen Minuten
RGBpx LED ring for aqualis 100/150, 10 addressable LEDsThe RGBpx-compatible LED ring for aqualis 100 and aqualis 150 expansion tanks with a total of 10 individually addressable LEDs. The LEDs are mounted in a black rubber ring which is slid onto the glass tubes of the aqualis 100 and aqualis 150 expansion tank series.To operate the LED strip, an appropriate control unit with RGBpx output is required (not included in delivery). At the end of the strip there is an additional connector to connect another RGBpx component.Technical data: Inner diameter 50 mm Dimensions approx. 60 x 62 x 10 mm 10 individually controllable LEDs Scope of delivery: RGBpx LED ring one RGBpx connection cable, length 50 cm Compatible to: D5 NEXT QUADRO fan controller
Hochwertiges Reservoir aus Acryl, 200 ml Füllvolumen & flexible Montage, Vorbereitung für DDC-Pumpe & 4 Anschlüsse für 1/4-Zoll-Fittings, Bracket zur Installation auf 120- und 140-mm-Lüftern, digital adressierbare RGB-Beleuchtung
Full-Block-Wasserkühler von EK Water Blocks, für RTX 3080 und 3090-Grafikkarten im Referenz-Design, schwarzer Acetal-Deckel, Kühlkörper aus hochreinem Kupfer
With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible. With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation. The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. Technical specifications: Base plate material: electrolyte copper Material cover: acrylic glass Cover material: black anodized aluminum Connection terminal material: Acetal Dimensions: (LxWxH): 230 x 119 x 21 mm Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: Pressure tested: 2 bar Compatibility: Nvidia Geforce RTX 3080/3090 Scope of delivery: 1x HEATKILLER® V 1x mounting material Thermal Grizzly Kryonaut thermal paste
Funktionaler Fan-, Pumpen- und RGB-LED-Controller, mit separatem LC-Display, bis zu 4 Lüfter mit oder ohne PWM, 4x RGB (12VGRB) & 4x adressierbares RGB (5VDG), inklusive Fernbedienung
The Protium reservoir from Singularity Computers is a 200mm tube with a diameter of 60mm. Together with the acrylic attachments, the reservoir reaches a height of 239mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 x 60 x 239 mm (L x W x H) Diameter: 60 mm Material: Acrylic (lid, base, reservoir), Aluminium (retention rings) Color: Black, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 200 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
Visual appearance combined with functionality. After the successful launch of the “Lian Li 011D Mini MK1“, now the Lian Li Mini is followed by the “MK2” front distro plate. It is made of high-quality and transparent acrylic glass. Despite the small case, our distro plate MK2 allows all radiators as well as GPU and CPU to be connected in the circuit. This is rendered possible by a large chamber and 5 channels with a total of 12 ports (incl. fill port & drain port). The “MK2” will replace the original tempered glass pane. The distro plate is made of high-quality acrylic and the accuracy of fit is assured. Additionally, we use EPDM seals to guarantee leak tightness. After the leak test, a test seal is glued on the back of the plate. The screw-fitting points provided by Lian Li are used for fixation. To mount the distro plate safely, 4 screws with sealing disc are included in the scope of delivery. It is important to ensure that only (!) “ECWB SE360 (2x) “ & “ ECA SE240 (1x)“ radiators are usable because the accuracy of fit can only be assured in this case. A frame sticker (you may choose between black or white) decorates the sides of the front. Thereby, mounting strips that are glued on the rear side of the distro are covered. Overview of Features smallest distro plate of the Lian Li series frame sticker, selectable in black or white clever plug-in system for effortless installation adapter allows perfect fit of a D5 pump compatible with EK-CoolStream SE360 2x and 1x SE240mm (radiators) Technical details Material: high-quality acrylic glass, plastic Manufacturing: CNC machining of the acrylic, assembly by hand Dimensions: without pump (W x H x D): 487 x 211 x 21 mm, with pump (W x H x D): 487 x 211 x 90 mm Colour: transparent Connections: 12x G1/4" Capacity: 435 ml Compatibility: 3x360mm fan space Scope of Delivery Lian Li Mini MK2 4x M3 screws
Vernickeltes Compression Fitting von EK Water Blocks, für Röhren mit 12 mm OD, Kompatibel zu Röhren aus Acryl / PETG / Kupfer / Messing / Edelstahl, 6er Pack
Schwarzer 240-mm-Radiator von Magicool, aus der G2-Ultra-Reihe mit 45 mm Dicke, für beidseitig 2x 120-mm-Lüfter, 13 FPI Lamellendichte für Silent-Fans, Dual-Pass-Design
Ausgleichsbehälter von Singularity Computers, mit 250mm Tube-Höhe, transparente Röhre aus Acrylglas, mit Deckel und Boden aus Acetal, flexible Montagemöglichkeiten, Schwarz
The Protium expansion tank from Singularity Computers is a 150mm tube with a diameter of 60mm. Together with the acrylic attachments, the expansion tank reaches a height of 189mm. It has a total of seven G1/4" ports and the tube itself is made of acrylic. Technical Data Dimensions: 60 × 60 x 189 mm (L x W x H) Diameter: 60 mm Material: acrylic (reservoir, lid, base), aluminium (retention rings) Color: transparent, black/li> Ports: 7x G1/4" Scope of delivery: 1x 150 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
The Alphacool Eisbaer Pro Aurora offers a much larger cooling surface than the normal Eisbaer Aurora. It was specially developed for extremely large CPU DIEs and fully covers processors such as the AMD Threadripper but also the AMD Ryzen CPUs. The Eisbaer Pro has also been designed for the Intel Socket 3647 to ensure the best possible cooling performance of the entire CPU. The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market. Large cooling surface The cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. With the included AM4 bracket, cooling an AMD Ryzen processor is also child's play. The cooling fins are 0.4mm thick and also have an optimal distance of 0.4mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3mm thick, which allows the heat to reach the water and be dissipated as quickly as possible. Pump The Eisbaer Pro Aurora cooler uses the very compact and small DC-LT 2 pump. It offers enough power to integrate other components such as a GPU water cooler or radiator into the water circuit. Lighting The entire Eisbaer Pro Aurora cooler is equipped with addressable, digital RGB LEDs. This makes it a real eye-catcher in the case. Of course, all digital RGB LEDs can be controlled as desired. Depending on the controller, almost all effects are possible. Usable fittings Connections that are too large mean that the fill port can no longer be used. We recommend the following: - up to and including 13/10 without restriction - 16/10 only in angled version - Connections larger than 16/10 should not be used Compatibility: Intel: 1700 / 2011 / 2011-3 / 2066 / 3647 Narrow & Square / LGA 4189 AMD: AM4 / TR4 / sTRX4 / SP3 / sWRX8 / AM5 Technical data cooler with pump L x W x H 64 x 79 x 54,3mm Material cooler bottom nickel plated copper Material cooler top acrylic Threads 2x G1/4“ (+ 1x Fillport G1/4“) Pump type DC-LT2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow 75 L/h Voltage 12V DC Power consumption 4W Pressure tested 0,8 Bar Maximum working temperature 60°C Number of LEDs 10x Digital aRGB LEDs
Cyclone sülearvuti jahutusalus Kahe sisseehitatud vaikse jahutusventilaatoriga sülearvuti alus mugavaks kallutatud trükkimisasendiks ja kaitseks ülekuumenemise eest. - 2 vaikset jahutusventilaatorit - 8 taset reguleeritav disain - USB toitega - Sülearvutitele kuni 16" Valik mudelitele Kuni 16" sülearvutitele
Dimension ( with fan ): L97 mm x W97 mm x H47 mm Weight ( with fan ): 357 g Weight ( without fan ): 295 g Heat pipes: 6mm heatpipe x 4 units Fin: T = 0.4 mm ; Gap = 1.2 mm Fin Pcs: 57 pcs Copper Base: C1100 Pure copper nickel plated RAM Height Limit: Limitless TDP: 100 W Fan dimension: L92 mm x W92 mm x H15 mm Weight: 62 g Rated Speed: 600 ~ 2500 RPM ±10 % Noise Level: 30 dBA Air Flow: 40.5 CFM Air Pressure: 2.8 mmH2O Ampere: 0.2 ADimension ( with fan ): L97 mm x W97 mm x H47 mm Weight ( with fan ): 357 g Weight ( without fan ): 295 g Heat pipes: 6mm heatpipe x 4 units Fin: T = 0.4 mm ; Gap = 1.2 mm Fin Pcs: 57 pcs Copper Base: C1100 Pure copper nickel plated RAM Height Limit: Limitless TDP: 100 W Fan dimension: L92 mm x W92 mm x H15 mm Weight: 62 g Rated Speed: 600 ~ 2500 RPM ±10 % Noise Level: 30 dBA Air Flow: 40.5 CFM Air Pressure: 2.8 mmH2O Ampere: 0.2 A Motherboard compatibility: Socket 115X, FM1, FM2/+, AM2/+, AM3/+
Stylische Sleeves von CableMod, für Hydro-AiOs von Corsair & EVGA & NZXT, Textil-Sleeving aus ModMesh-Material, einfache Installation in wenigen Minuten
Tootekood: FD-FAN-PRI-AL12-3PGTIN: 7340172701606Jahutid ja lisad
Dimensions 120x120x25mm, Turns 1200rpm, Air flow rate 86.02m³ / h, Air pressure 1.27mmH₂O, Volume 19.5dB (A), Fan bearing LLS, Connection 3-pin, Voltage range 7-12V, Power consumption 1.2W, Special features RGB illuminated, RGB header (3-pin + 5V / DATA / GND), FD-FAN-PRI-AL12-3P
The transparent lid made of matt acrylic fits all Protium reservoirs from Singularity. It has four G1/4" connections and, due to its design, can be integrated into the water cooling circuit in a variety of ways. Technical Data Colour: Transparent Material: Acryl (matt) Thread: 4x G1/4" Compatibility: Protium reservoir
Tootekood: R-LS720-WHAMNT-G-1GTIN: 6933412727644Jahutid ja lisad
The DeepCool LS720 premium liquid CPU cooler maximizes cooling performance and low-noise efficiency with a 360mm radiator, three FC120 A-RGB PWM fans, and an infinity mirror cap design.
All-in-One water cooling from InWin, 360mm radiator with integrated pump, fan, and cooling block with integrated RGB lighting, high compatibility with Intel and AMD sockets.
