The Bitspower fittings are the ideal complement for water cooling systems. The G1/4" screw connection with union nut in matt black is suitable for 16/10mm Soft Tubes (as well as for 16/11mm). Technical Data: Material: Brass Color: Matt Black Thread: G1/4 Zoll Thread Length: 5 mm Tubing Size: 16/10 mm (ID 3/8", OD 1/2")
Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung
NZXT Quiet Airflow Fans offer high-performance, low-noise cooling for heat-prone PCs. Optimized blades and a chamfered frame provide powerful concentrated air, while fluid dynamic bearings and PWM control keep things quiet and efficient. Nine sickle-style blades are optimized to move large amounts of air, ensuring versatile use for intake or exhaust. Minimal gap between blade edges and frame maximizes the spinning area for higher airflow and reduced turbulence. Chamfered frame design directs air in a powerful concentrated flow pattern, traveling far into the case to cool vital components. Fluid dynamic bearings provide unwavering stability, low-noise operation, and a 60,000-hour lifespan. PWM control dynamically adjusts fan speed for higher output or lower noise based on system temperatures for efficient cooling. Sturdy frame with rubberized corners absorbs vibrations for low-noise operation, even at high speeds.
Toote kirjeldus inglise keeles:To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a matte black, straight adapter with two 1/4 inch external threads. In addition, the connection is rotatable, which significantly simplifies the screwing. Note: The turning function of the connections should always be used in the disassembled state, as this is relatively stiff due to the design. When installed, do not apply force to connections to avoid damaging the connectors themselves and the radiators on them. Technical details:Manufacturer's article no .: BP-MBRGMaterial: brassColor: matt blackConnections: male thread: 2x 1/4 inch
VRM-Kühler von EK Water Blocks, für das High-End-Board ASUS ROG Dominus Extreme, sorgt für stabileres Overclocking und längere Lebensdauer elektronischer Komponenten, vernickelter Kupferkühler mit vernickeltem Messingdeckel, integrierte RGB-LED-Beleuchtung, ASUS Aura Sync kompatibel
The EK Quantum Vector RE RTX 3070 from EK is a complete cooler for the Founders Edition of the RTX 3070 from Nvidia. The high-quality workmanship and the nickel-plated copper material used for the heat sink are striking. The nickel-plated copper covers all important areas of the graphics card, such as GPU, memory and voltage converter. The optimised channel structure results in very efficient and reliable cooling. Visually, the black acetal lid stands out, which is rounded off by a metallic trim. In addition, the cooler has four G1/4" connections, which, however, are found on the short side instead of on the upper long side as usual. Technical Data Dimensions: 205 x 98 x 21 mm Material Base: Nickel-Plated Copper Material Cover: Acetal Thread: 4x G1/4" Compatibility NVIDIA GeForce RTX 3070 (Founders Edition) Scope of Delivery EK-Quantum Vector RE RTX 3070 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible. With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation. The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. Technical specifications: Base plate material: electrolyte copper Material cover: acrylic glass Cover material: black anodized aluminum Connection terminal material: Acetal Dimensions: (LxWxH): 230 x 119 x 21 mm Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: Pressure tested: 2 bar Compatibility: Nvidia Geforce RTX 3080/3090 Scope of delivery: 1x HEATKILLER® V 1x mounting material Thermal Grizzly Kryonaut thermal paste
Long Service Life The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life Perfect Case Fan Regulation with PWM The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level. PWM Sharing Technology (PST) Lowers Noise If you want to improve the cooling efficiency of your computer you get several case fans working in parallel (since it takes 10 fans to double the noise level). But what does it help if they don't work together? The PST assures that all of your fans listen to one control signal. E.g. you share the CPU Cooler's PWM signal and assure that your case fans stand down at low load and spin up whenever necessary. Innovative Design Enables Quiet and Efficient Ventilation The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure. Technical Data: Performance Fan Speed: 230 - 1350 rpm Airflow: 53 CFM/ 90.1 m³/h Static Pressure: 1,00 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard Controll Type: PST Connector: 4-Pin Connector + 4 Pin Socket Fan Bearing: Fluid Dynamic Bearing Electric Characteristics Typical Voltage: 12 V DC Starting Voltage: 6 V Current: 0.24 A Cable Lenght: 400 mm Size & Weight Lenght: 120 mm Width: 120 mm Height: 25 mm Weight: 109 g
Ausgleichsbehälter von Singularity Computers, mit 250mm Tube-Höhe, transparente Röhre aus Acrylglas, mit Deckel und Boden aus Acetal, flexible Montagemöglichkeiten, Schwarz
Now finally also with us the Black ICE Nemesis radiators. The Black Ice® Nemesis® GTS radiators are the next generation of computer radiators from Hardware Labs. These radiators offer an improved cooling performance when using
Premium-AiO-Kühlung in Schwarz, in Zusammenarbeit mit Roman "der8auer" Hartung, mit 240-mm-Radiator, zwei Wing Boost 3 ARGB High Speed 120-mm-Lüfter, schickes Design und leiser Betrieb, inkl. Thermal Grizzly Hydronaut Wärmeleitpaste, kompatibel mit vielen AMD- und Intel-Sockeln
The Protium reservoir from Singularity Computers is a 200mm tube with a diameter of 60mm. Together with the attachments made of acetal, the reservoir reaches a height of 239mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 x 60 x 239 mm (L x W x H) Diameter: 60 mm Material: Acetyl (lid, base), Acrylic (reservoir), Aluminium (retention rings) Color: Transparent, Black Threads: 7x G1/4" Scope of Delivery: 1x 200 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
FQ122 represents SilverStone’s pursuit of a design that balances performance and tranquility. Its included PWM module allows motherboard to control fan speed and regulate the temperature inside your chassis with optimal efficiency. It has unique double curved fan blade design for increased air pressure performance without additional noise. These features not only improve ventilation but also decrease operating noise.TüüpVentilaatorVentilaatori läbimõõt12 cmPöörlemiskiirus (min)800 RPMPöörlemiskiirus (max)1500 RPMMüratase (aeglane kiirus)14,5 dBMüratase (suur kiirus)24,9 dBMinimaalne õhuvool37,8 cfmMaksimaalne õhuvool63,8 cfmMinimaalne õhusurve0,41 mmH2OMaksimaalne õhusurve24,9 mmH2OVentilaatorite arv1 ventilaator(id)Toote värvSinine, ValgeLaius120 mmSügavus120 mmKõrgus25 mmKaal133 g
Besonders flacher Radiator aus Kupfer, Mattschwarzer Radiator von XSPC, 360-Millimeter-Format, Platz für je drei 120-mm-Lüfter pro Seite, 4x G1/4-Zoll-Gewinde, flexibles Crossflow-Design
With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2500 rpm, it provides an air flow of 62.8 CFM, together with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5 Technical data radiator L x W x H 397 x 120 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 19 Fan size 120mm Fan slots 3 one-sided / 6 double-sided Color black Technical data fans L x W x H 120 x 120 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.23 (Max. 0.4) A Rated Power 2.76 (Max. 4.8) W Rated Speed 0 - 2500rpm/min (±10%) Max. Air Flow 62.8CFM Max.Static Pressure 2.13mm-H2O Noise level (rated voltage, mute room, distance 1m) 33.0 (Max. 34.3) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm
All-in-One water cooling from InWin, 240mm radiator with integrated pump, fan, and cooling block with integrated RGB lighting, high compatibility with Intel and AMD sockets.
Tootekood: CR-3000E COLOR WHITEGTIN: 6970620554075Jahutid ja lisad
Extremely powerful dual-tower cooler with 260 W TDP Six 6-mm heatpipes 2x PWM fans in 120mm format High compatibility with AMD and Intel Bracket for easy installation Integrated lighting on fans and frame The Jonsbo CR-3000E CPU Cooler: The Jonsbo CR-3000E CPU cooler offers extremely high cooling performance thanks to its six heatpipes and PWM fans. In addition, this very quiet cooler features immense cooling reserves with a TDP of 260 W, making it ideal for overclocked CPUs and easy to install even with the motherboard already mounted. Sleek design with powerful cooling performance The CR-3000E is a high-performance dual-tower cooler that enables very efficient and quiet cooling with its two fans. The smooth-running fan motors reduce vibrations and, together with the bearing, ensure a very long lifespan. Perfect cooling for your CPU including lighting effects Thanks to six high-performance heatpipes, the heatsink ensures excellent heat dissipation. The cooler's large fin surface, due to its dual-tower design, transfers a particularly large amount of heat to the airflow. Additionally, built-in lighting enhances your setup and adds an extra visual highlight.
Average Particle Size: 0.49 micron (0.000020 inch) Peak: –50°C to 180°C Long-Term: –50°C to 130°C Performance:3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core. Coverage Area:A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches. tootja lehel:http://www.arcticsilver.com/as5.htm
The Alphacool “Eiszeit” is a compressor cooler with a maximum cooling power of 1500W. Unlike most so-called Chillers or circulating coolers, the Eiszeit has a high-performance integrated pump. Highlights Integrated pump with 10m head and 600L per hour. Cooling power of 1500W Cooling can be regulated in 0.3 Kelvin increments. Large reservoir with 9L capacity All connectors fit standard G1/4” threads With the “Eiszeit”, you get a compressor cooler designed by Alphacool. With it, you can keep your system – or more than one system – at a temperature you pre-set, automatically regulated for you. The Eiszeit has a maximum cooling power of 1500W. Entering your settings is easily done through the Eiszeit’s display, and you can set the temperature in precise increments of 0.3° Kelvin. If necessary, you can reach temperatures far below room temperature. Another highlight is the integrated high-performance pump with a maximum head of 10m. This means a separate pump is no longer necessary. If the pump performance proves to be too strong, a restrictor can be integrated into the cooling loop via a ball valve or check valve. The G1/4” connectors can fit nearly all standard water cooling attachments. This gives the Eiszeit outstanding compatibility compared to other current products like CPU coolers and graphics card coolers. The Eiszeit also has security functions, such as surge protection for the compressor and an alarm indicating the flow rate is too low or the temperature is too high. Using the Eiszeit is relatively simple. After connecting it to the cooling loop, the loop needs to be filled via the fill port on top of the Eiszeit. The integrated reservoir holds 9L; additionally, you will need enough coolant to fill the complete loop. ATTENTION The temperature can NOT be set below 20 ° C. Technical Details Voltage: 230V Frequency: 50Hz Current: 2.4~3.3A Power consumption: 660W Compressor power: 0.49/0.57KW (0.66/0.77HP) Refrigeration capacity: 1.41/1.70KW Refrigerant: R-134a Refrigerant charge: 380g Precision: ±0.3℃ Reducer: Capillary Protection: Surge protection for compressor, flow alarm, high temperature alarm Pump power: 0.03KW Tank capacity: 9L Inlet and outlet: G1/4 Inner threads connector Max. Lift: 10 meters Max. Flow: 10 L/min Net weight: 29Kgs Noise level: 65 db(A) Dimensions (LxWxH): 560 x 280 x 470mm Materials Reservoir: Polypropylene Tube soft: Silicone Tube hard: PU Scope of Delivery Alphacool Eiszeit 2000 Chiller - black Manual in multiple language Alarm output connector UK power plug Download manual: manual Download data sheet: data sheet NOTICE Because all of the Eiszeit’s functions are tested after manufacturing, some coolant does remain in the system when it is shipped. This is NOT grounds for a return and does not indicate that this item is B-stock or an exchanged item. Notice regarding shipping This item can only be shipped through a freight forwarding service. Since shipping costs will vary by distance, online price calculation is not possible at this time. Please give your full telephone number and email address when placing your order. We will contact you after your order is placed. Shipping costs can add up to ca. 25€ within Germany. Freight forwarding costs will be specified during the ordering process. In case of returns This item can only be sent via a freight forwarding service! Should you need to return the item, please make use of a forwarding agency! Items returned to us via parcel service will not be accepted, as shipping them through a parcel delivery service will damage the device!
The EK-Quantum Vector Strix RTX 3070 D-RGB from EK is a complete cooler for the graphics card of the ROG Strix RTX 3070 from ASUS. The high-quality workmanship and the nickel-plated copper material used for the heat sink are striking. The copper covers all important areas of the graphics card, such as GPU, memory and voltage converter. The optimised channel structure provides very efficient and reliable cooling. Visually, the cooler is rounded off with a black acetal lid and has four G1/4" connections. But there's more: an addressable D-RGB strip is also integrated, which provides a little illumination even on dark gaming days. The graphics card cooler is compatible with the common RGB synchronisation technologies of all major mainboard manufacturers. Technical Data Material: Nickel-Plated Copper (bottom), Acetal (cover) Color: Black Thread: 4x G1/4" D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) D-RGB LED count: 6 D-RGB cable length: 500mm Compatibility Asus ROG Strix RTX 3070 Scope of Delivery EK-Quantum Vector Strix RTX 3070 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
