Leistungsstarker CPU-Kühler von Aerocool, integrierte digital adressierbare RGB-Beleuchtung, ein 120-mm-PWM-Lüfter mit ARGB-LEDs, TDP von 145 Watt, hohe Kompatibilität zu Intel- und AMD-Sockeln
Optimised for Static Pressure During the development of the new P14 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM PST is particularly suitable for use on heatsinks and radiators. More Efficient Technology The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P14 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance. Maximum Quietness, Minimum Vibration Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years. 200 to 1700 RPM regulated via PWM PST With a wide range of regulation and the PWM Sharing Technology (PST), the P14 PWM PST fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed. High Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Technical Data Performance Fan Speed: 200 - 1700 rpm Airflow: 72.8 CFM/ 123.76 m³/h Static Pressure: 2,40 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard Controll Typ: PST Connector: 4-Pin Connector + 4 Pin Socket Fan Bearing: Fluid Dynamic Bearing Electric Characteristics Typical Voltage: 12 V DC Starting Voltage: 3.9 V Current: 0.12 A Cable Lenght: 400 mm Size & Weight Lenght: 140 mm Width: 140 mm Height: 27 mm Weight: 194 g
140 mm PWM-Lüfter, mit Sealed Precision FDB-Lagern für hohe Lebensdauer & Laufruhe, 300 - 1.200 U/Min bei max. 19,4 dB(A), 28,5 - 114,3 m³/h Airflow, 2,81 mmH2O Luftdruck, mit RGB-Beleuchtung
140 mm PWM-Lüfter mit 120 mm Lochabstand, mit Sealed Precision FDB-Lagern für hohe Lebensdauer & Laufruhe, 300 - 1.800 U/Min bei max. 26,45 dB(A), 28,5 - 171,3 m³/h Airflow, 2,81 mmH2O Luftdruck, mit RGB-Beleuchtung
120 mm Lüfter im Slim-Format, mit Sealed Precision FDB-Lagern für hohe Lebensdauer & Laufruhe, 1.800 U/Min bei 30 dB(A), 86,3 m³/h Airflow, 1,35 mmH2O Luftdruck
The Alphacool Eiswolf 120 GPX-Pro is the first prefilled water cooler for graphics cards with an integrated pump. Alphacool developed a completely new pump design to minimize the pump's volume and increase performance, and the suction pump was born. Through its suction principle, less turbulence is created in the water, allowing for a more even flow. This also makes the pump nearly inaudible - a first in the AIO market. Naturally, the cooler comes with a backplate that is directly attached to the cooler after installation, ensuring better heat transfer and distribution. This significantly improves the cooling performance. Additionally, it offers an aesthetic improvement in that the graphics card PCB is barely visible from the side. All that remains is a slight opening for the electrical connection and SLI/CrossFire Connector, of course. The hoses and connectors are also based on standard water cooling components. The hose is encased in anti-kink springs and comes in the 11/8mm size. The connectors have standard G1/4" threads and can therefore be exchanged for any other model or size desired. The two quick-release fasteners allow the cooler to fit easily into any cooling loop. If you are using the Alphacool Eisbaer CPU AIO water cooler, you can easily connect it with the Eiswolf 120 GPX-Pro using the quick-release fasteners. Using the Eisbaer gives you a redundant system, as you have two pumps in the loop. In the unlikely event that one pump fails, the other can still support the cooling loop. This is security at its highest level. Graphics card not included Compatibility MSI GeForce GTX 1080 Ti Armor 11G OC, 11GB GDDR5X, DVI, 2x HDMI, 2x DisplayPort (V360-010R) MSI GeForce GTX 1080 Ti Sea Hawk EK X 11GB GDDR5X (360-037R) MSI GeForce GTX 1080 Ti Gaming X 11G 11GB GDDR5X (V360-001R) MSI GeForce GTX 1080 Ti Gaming 11G 11GB GDDR5X MSI GeForce GTX 1080 Ti DUKE 11G OC 11GB GDDR5X MSI GeForce GTX 1080 Ti DUKE 11G 11GB GDDR5X MSI GeForce GTX 1080 Ti Armor 11G 11GB GDDR5X Scope of Delivery 1x Alphacool Eiswolf 120 GPX Pro Nvidia Geforce GTX 1080Ti M16 - black Configurator for VGA cooler Manual available for download here Compatibility list Nvidia Eiswolf Brochure
Funktionaler Fan-, Pumpen- und RGB-LED-Controller, mit separatem LC-Display, bis zu 4 Lüfter mit oder ohne PWM, 4x RGB (12VGRB) & 4x adressierbares RGB (5VDG), inklusive Fernbedienung
The Barrow Manual air tightness tester is designed to test liquid cooling systems without water. With the G1/4" fitting the tester can be connected directly to the system. This is fast and safe. With the pump air is pumped into the circuit, so that in case of possible leakage no components on the PC are damaged by cooling liquid. With the built-in pressure gauge, the pressure can be read precisely. Technical Data Color: Black Threads: G1/4" external thread Weight: 240,8g Maximum Pressure: 1 Bar Scope of Delivery Barrow Manual air tightness tester
The nickel-plated adapter in the color shiny silver couples two tubes, which do not run on a common straight line and provides at the adapter for a bend of 90 degrees. Two rubber rings seal both sides. The adapter is especially well compatible with the Crystal Link Tubes from Bitspower. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Angle: 90 ° Connections: 2x Ø 12 mm
The Alphacool ES Distro Plates provide order in the system and facilitate the exchange of components in conjunction with quick-release fasteners. They offer extensive mounting options and are the ideal foundation for any enterprise system that is to be equipped with water cooling. Mounting options The ES Distro Plates can be mounted in many ways. The easiest and fastest variant is the mounting via the included self-adhesive Velcro. One side is glued stuck dirrectly to the Distro Plate, the other side to any place in the case. After that, you can simply put the Distro Plate on the Velcro. Alongside the Velcro, special feet and mounting frames are included to provide multiple installation options. With the mounting accessories, the Distro Plate can be mounted to any 120 or 140 mm fan space. The included feet also offer many mounting options, including a vertical mounting option on a single foot. Various threaded holes on the sides and back of the ES Distro Plate offer more direct mounting options, including customized holes for special mounting rails in Alphacool's server racks. Connection options The ES Distro Plate C5 has a total of 22 connection options in G1/4 format with 5mm deep threads. There are 5 connections on each long side, 10 on the top side and one connection thread on each front side. However, it is important to note that all connections are in pairs. So you can only use the top or the side connection. The excpetion are the ports with 3 sides. Here, only the lateral, upper or the connection on the front side can be used. The exact options are illustrated in the instructions. This configuration makes it very easy to connect all components in the water circuit to the Distro Plate. Of course, several ES Distro Plates can also be connected in series. Why an ES Distro Plate? Especially in narrow server cases, it is essential to allow a clean setup of the water cooling. If you draw the cooling loop beforehand, you will quickly find the ideal place for the Distro Plate. An ideal place is when all hoses can be laid as straight as possible, bending tubing too tightly should be avoided where possible. If components are to be replaced, the use of Alphacool ES quick connectors with external thread is recommended. This way, all components in the loop can be mounted directly to the Distro Plate with quick connectors. This makes the replacement of, for example, one or more radiators very quickly possible. Additional or larger radiators can also be easily integrated or replaced. Technical data: L x W x H 56 x 130 x 22,5 mm Material top Acetal Material bottom Nickel plated copper Threads 22 x G1/4“ Download manual PDF: Alphacool ES Distro Plate C5 Download data sheet PDF: Alphacool ES Distro Plate C5
OPTIMISED FOR STATIC PRESSURE During the development of the new P8, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 is particularly suitable for use on heatsinks and radiators. HIGH QUALITY BEARING Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. MAXIMUM QUIETNESS, MINIMUM VIBRATION Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. Technical Data Performance Fan Speed: 3000 rpm Airflow: 23.4 CFM / 40.3 m³/h Static Pressure: 1,90 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard Controll Typ: Fixed Speed Connector: 3-Pin Connector Fan Bearing: Fluid Dynamic Bearing Electric Characteristics: Typical Voltage: 12 V DC Starting Voltage: 0 V Current: 0.14 A Cable Lenght: 400 mm Size & Weight Lenght: 80 mm Width: 80 mm Height: 25 mm Weight: 81 g
The retention rings attach the tops to both ends of the acrylic tubes. As they are included as standard with the Protium reservoirs, this item serves as a replacement or to replace rings of a different colour. Technische Details Material: Aluminium Colour: Black Compatibility: Protium series Scope of delivery 2x retention ring
The retention rings attach the tops to both ends of the acrylic tubes. As they are included as standard with the Protium reservoirs, this item serves as a replacement or to exchange rings of a different colour. Technische Details Material: Aluminium Colour: Silver Compatibility: Protium series Scope of delivery 2x retention ring
The connection for 16mm (AD) Hard Tubes from EK Water Blocks, is a compression fitting made of nickel-plated brass. It is kept in black and comes from the Torque series, which convinces with a simple and timeless design. Originally intended for the EKWB Quantum series, this fitting is also compatible with other EK products. In this fitting, the union nut serves as a compression ring, which presses the sealing ring onto the hard tube. It thus offers a higher level of safety and sealing than, for example, the fittings of the EK-HD series. As a small feature, the union nut has a recess under which coloured rings are placed, which provide a bit of individuality and are available separately. Technical Data: Material: Nickel-Plated Brass Colour: Black Supported Tube: 16 mm OD Thread: G1/4", male Thread Length: 4,5 mm Outer Diameter (Fitting): 24 mm Installed Height: 15 mm Compatible Solid Tubing: Acrylic, PETG, Copper, Brass, Stainless Steel
Verchromtes Wakü-Fitting von Phanteks mit zwei G1/4-Zoll-Gewinden (Male) zum Verbinden zweier GPU-Wasserkühler mit einem Abstand von 16 bis 22 Millimetern
