With the Alphacool Eisbaer LT, you get a high-performance compact water cooling system that’s barely inferior to its bigger brother, the Eisbaer AIO.Just like the Eisbaer, the Eisbaer LT distinguishes itself from the usual AIO mix in that Alphacool relied on normal custom components as much as possible during development. This allows the Eisbaer LT to be expanded on not just with the Eisbaer Ready quick connectors but also with connectors using standard G1/4” threads. These can be replaced with other models at any time. Another highlight is the new 25mm thin Slim Radiator, made entirely of copper. Since copper has twice the heat capacity of aluminium, optimal cooling is guaranteed.Cooler and pumpThe cooler bottom is made entirely of copper and has an ultra-fine cross slot structure. Thanks to those cross slots and a sophisticated nozzle system, heat is absorbed extremely fast and transferred away from the CPU. The built-in DC-LT 2 Ceramic pump is an extremely quiet pump that Alphacool has used in many products. The pump is much stronger than what you’d usually find in AIOs. It can also be throttled with the optional 7V adaptor, decreasing the already low noise generation even further. The pump casing is very flat and the aluminium cap gives it a clean, elegant look.FittingsAlphacool relies on the standard DIY fittings you’d find in any standard water cooling system. Components are made entirely of high-quality brass and use a G1/4” thread. This means fittings can be exchanged easily, just like in a standard system. Maybe you want different tubing or want to switch over to HardTubes – your options are wide open.Quick connectorsThe Eisbaer LT’s quick connectors make it compatible with all other Eisbaer Ready products, like the Eiswolf GPX-Pro cooler or the Eiswand external radiator. Both products use the same pump – perfect for quickly and easily expanding the cooling loop. Alternatively, you can use the Extension Set or Alphacool HF Quick Connectors (available separately) to integrate other components into the system.TubingThe compact but standard 11/8mm tubing size was Alphacool’s go-to here. The tubing uses anti-kink springs in order to prevent kinks in the tubing. This makes it easy to lay tubing even in tight spaces, meaning the Eisbaer LT is easy to install even in compact cases.RadiatorAlphacool has integrated a brand-new 25mm-thin Ultra-Slim Radiator. Unlike most AIO systems, Alphacool’s radiator is not made of cheap aluminium, but rather high-quality copper. With twice the heat capacity, copper significantly increases the radiator’s cooling performance. This is especially noticeable when you reach the performance limits of a radiator. While temperatures in aluminium radiators progressively rise fairly early, copper radiators can keep the temperature stable for much longer.FansAlphacool's Core is a quiet and efficient fan with a wide control range up to 2500 rpm. The via PWM signal controllable fan is particularly well suited for radiators. The double-bearing fan axis is smooth running and enables a long service life as well as quiet operation.At first glance, the Eisbaer LT looks like a typical CPU AIO solution, but a closer look elevates the Eisbaer LT far above the competition. Thanks to its copper radiator and cooling block, its cooling power is enormous, and the quick connectors and custom water cooling components make it easy to expand on. On top of that, you have product options that can connect to the Eisbaer LT without needing to be refilled at all – such as external radiators, prefilled radiators, and graphics card coolers. The portfolio is constantly expanding. Compatibility:AMD: 754 / 939 / 940 / AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5 / C32 / FM1 / FM2 / FM2+ / G34Intel: LGA 1150 / LGA 1151 / LGA 1156 / LGA 1200 / LGA 1366 / LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 755 Technical Data RadiatorDual120 mmL x W x H270 x 120 x 25 mmMaterial100% CopperTechnical Data FansFansCoreBearinghydraulic BearingVoltage12VPower connector4-Pin PWMRated speed (rpm)0 - 2500 rpm ±10%Fan efficiency72.63 CFMAir pressure2.42 mm/H2OVolume36.6 (Max: 37.8) dBATechnical Data CPU CoolerL x W x H69 x 69 x 39 mmCooler bottom dimensions56 x 56 x 3 mmCooler bottom materialNickel-plated copperThreads3x G1/4" (Inlet, Outlet, Fillport)Technical Data PumpDC-LT 2 Ceramic12VRated speed (rpm)2600Voltage range6-13,5V DCPower consumption3,2WFlow rate72L/hMaximum head1mPower connection3-PinTechnical Data TubingsLenght32 cm, including anti-kink springsDiameter11/8 mmMaterialPVC2 quick connectors L x W83 x 28 mm pre-installed
Dimension ( with fan ): L97 mm x W97 mm x H47 mm Weight ( with fan ): 357 g Weight ( without fan ): 295 g Heat pipes: 6mm heatpipe x 4 units Fin: T = 0.4 mm ; Gap = 1.2 mm Fin Pcs: 57 pcs Copper Base: C1100 Pure copper nickel plated RAM Height Limit: Limitless TDP: 100 W Fan dimension: L92 mm x W92 mm x H15 mm Weight: 62 g Rated Speed: 600 ~ 2500 RPM ±10 % Noise Level: 30 dBA Air Flow: 40.5 CFM Air Pressure: 2.8 mmH2O Ampere: 0.2 ADimension ( with fan ): L97 mm x W97 mm x H47 mm Weight ( with fan ): 357 g Weight ( without fan ): 295 g Heat pipes: 6mm heatpipe x 4 units Fin: T = 0.4 mm ; Gap = 1.2 mm Fin Pcs: 57 pcs Copper Base: C1100 Pure copper nickel plated RAM Height Limit: Limitless TDP: 100 W Fan dimension: L92 mm x W92 mm x H15 mm Weight: 62 g Rated Speed: 600 ~ 2500 RPM ±10 % Noise Level: 30 dBA Air Flow: 40.5 CFM Air Pressure: 2.8 mmH2O Ampere: 0.2 A Motherboard compatibility: Socket 115X, FM1, FM2/+, AM2/+, AM3/+
Dimensions: 140 x 168,3 x 142,4 mm (W x H x D) Colour: Silver, black Heatpipes: 7x 6 mm TDP: 250 W + Fans: 2x 140 mm XF140 Colour: Black Connector: 4-Pin-PWM RPM: 700 - 1.300 RPM Volume: 23 dB (A) Flow Volume: max. 152 m³/h Static Pressure: max. 1.44 mm H2O Compatibility: Intel sockets 775,1150,1151,1155,1156,1366,1366,2011,2011-V3 AMD sockets FM1, FM2, FM2+, AM2, AM2+, AM3, AM3+, AM4 (with extension kit) Maximum RAM height: 30 to 35 mm
With the Alphacool Eisbaer LT, you get a high-performance compact water cooling system that’s barely inferior to its bigger brother, the Eisbaer AIO.Just like the Eisbaer, the Eisbaer LT distinguishes itself from the usual AIO mix in that Alphacool relied on normal custom components as much as possible during development. This allows the Eisbaer LT to be expanded on not just with the Eisbaer Ready quick connectors but also with connectors using standard G1/4” threads. These can be replaced with other models at any time. Another highlight is the new 25mm thin Slim Radiator, made entirely of copper. Since copper has twice the heat capacity of aluminium, optimal cooling is guaranteed.Cooler and pumpThe cooler bottom is made entirely of copper and has an ultra-fine cross slot structure. Thanks to those cross slots and a sophisticated nozzle system, heat is absorbed extremely fast and transferred away from the CPU. The built-in DC-LT 2 Ceramic pump is an extremely quiet pump that Alphacool has used in many products. The pump is much stronger than what you’d usually find in AIOs. It can also be throttled with the optional 7V adaptor, decreasing the already low noise generation even further. The pump casing is very flat and the aluminium cap gives it a clean, elegant look.FittingsAlphacool relies on the standard DIY fittings you’d find in any standard water cooling system. Components are made entirely of high-quality brass and use a G1/4” thread. This means fittings can be exchanged easily, just like in a standard system. Maybe you want different tubing or want to switch over to HardTubes – your options are wide open.Quick connectorsThe Eisbaer LT’s quick connectors make it compatible with all other Eisbaer Ready products, like the Eiswolf GPX-Pro cooler or the Eiswand external radiator. Both products use the same pump – perfect for quickly and easily expanding the cooling loop. Alternatively, you can use the Extension Set or Alphacool HF Quick Connectors (available separately) to integrate other components into the system.TubingThe compact but standard 11/8mm tubing size was Alphacool’s go-to here. The tubing uses anti-kink springs in order to prevent kinks in the tubing. This makes it easy to lay tubing even in tight spaces, meaning the Eisbaer LT is easy to install even in compact cases.RadiatorAlphacool has integrated a brand-new 25mm-thin Ultra-Slim Radiator. Unlike most AIO systems, Alphacool’s radiator is not made of cheap aluminium, but rather high-quality copper. With twice the heat capacity, copper significantly increases the radiator’s cooling performance. This is especially noticeable when you reach the performance limits of a radiator. While temperatures in aluminium radiators progressively rise fairly early, copper radiators can keep the temperature stable for much longer.FansAlphacool's Core is a quiet and efficient fan with a wide control range up to 2000 rpm. The via PWM signal controllable fan is particularly well suited for radiators. The double-bearing fan axis is smooth running and enables a long service life as well as quiet operation.At first glance, the Eisbaer LT looks like a typical CPU AIO solution, but a closer look elevates the Eisbaer LT far above the competition. Thanks to its copper radiator and cooling block, its cooling power is enormous, and the quick connectors and custom water cooling components make it easy to expand on. On top of that, you have product options that can connect to the Eisbaer LT without needing to be refilled at all – such as external radiators, prefilled radiators, and graphics card coolers. The portfolio is constantly expanding. Compatibility:AMD: 754 / 939 / 940 / AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5 / C32 / FM1 / FM2 / FM2+ / G34Intel: LGA 1150 / LGA 1151 / LGA 1156 / LGA 1200 / LGA 1366 / LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 755 Technical Data RadiatorTriple120 mmL x W x H390 x 120 x 25 mmMaterial100% copperTechnical data fansFansCoreBearinghydraulic BearingVoltage12V DCPower connector4-Pin PWMRated speed (rpm)0 - 2000 rpm ±10%Air pressure103.03 CFMFan efficiency2.81 mm/H2OVolume38.3 (Max: 40.0) dBATechnical data CPU coolerL x W x H69 x 69 x 39 mmCooler bottom dimensions56 x 56 x 3 mmCooler bottom materialNickel-plated copperThreads3x G1/4" (Inlet, Outlet, Fillport)Technical data pumpDC-LT 2 Ceramic12V DCRated speed (rpm)2600Voltage range6-13,5V DCPower consumption3,2WFlow rate72 L/hMaximum head1 mPower connection3-PinTechnical data tubeLength32 cm, including anti-kink springsDiameter11/8 mmMaterialPVC2 quick connectors L x W83 x 28 mm pre-installed
StarTech.com High Air Flow 9.25 cm Dual Ball Bearing Case Fan with TX3 Connector. Sobilik: Arvuti korpus, Müratase (suur kiirus): 33 dB. Toote värv: Must. Kaal: 108 g, Pakendi laius: 26 mm, Pakendi sügavus: 157 mm. Mõõdud (l x s x ...
Dimensions 120x120x25mm, Turns 1100rpm, Air flow 65m³ / h, Air pressure 0.82mmH₂O, Volume 15.7dB (A), Connection 3-pin, Voltage range 6-12V, Power consumption 1.44W, Special features vibration damper, BL084
be quiet! Pure Wings 2 140mm PWM high-speed. Sobilik: Arvuti korpus, Tüüp: Ventilaator, Ventilaatori läbimõõt: 14 cm. Kaabli pikkus: 0,46 m, Sertifikaat: CE, TÜV, UL. Toiteallikas: 6 W, Pinge: 5 - 12 V, Lubatud voolupinge: 12 V. ...
High-End-AiO-Wasserkühlung von Alphacool, 280-mm-Radiator und zwei 140-mm-PWM-Lüftern, variable Pumpleistung und hochwertiger CPU-Kühler, mit Schnellverschlüssen zur einfachen Aufrüstung, kompatibel zu aktuellen AMD und Intel Sockeln
The Prizm 120 ARGB fans from Antec have an RGB LED ring on both sides. This allows lighting effects to be displayed on both sides. The 18 independent LEDs are addressable and have almost 16.8 million RGB colours. The fans can be connected to compatible mainboards and controlled via software of the corresponding board, such as ASRock Polychrome Sync, Asus Aura Sync, MSI Mystic Light Sync or Razer Chroma RGB. With the supplied fan controller, a total of 5 fans can be connected and easily switched between colors and light effects. ARGB LED strips are also included. The 120mm fans are PWM controlled and adapt to temperatures to effectively minimize noise and ensure optimum heat dissipation. Furthermore, the fans have a hydraulic bearing and are equipped with shock-absorbing pads on the rear at all four corners. Technical Data: Model Name: Prizm 120 ARGB 3+2+C Fan Type: PWM Dimensions: 120 x 120 x 25 mm Bearing Type: Hydraulic LED Type: Addressable RGB Fan Speed (RPM): max. 2000 Airflow (CFM): max. 45.03 Air Pressure (mm H2O): max. 2.56 Fan Noise Level (dBA): max. 32.6 Lifespan: 40000 hours Connector: Fan: 4 pin, ARGB: 3 pin Rated Voltage: FAN: DC12V, LED: DC5V Operating Voltage: FAN: DC6.0-13.8V, LED: DC4.5-5.3V Rated Current (A): FAN: 0.18A±20%, LED: 0.80A±20% Fan Control Box: ARGB port x5, PWM fan port x5, SATA, Mode, External LED CTRL, M/B Sync, LED Speed LED strips Length: 40cm Warranty: 2 years
With the “Eisbaer”, Alphacool is fundamentally revolutionizing the AIO cooler market. Where traditional AIO CPU-coolers are disposable products which are neither upgradeable nor refillable, the Alphacool “Eisbaer” is modularly built and can be upgraded, rebuilt or refilled at any time. This means that the “Eisbaer” is not only an AIO, but also fully built on classic water cooling components. That means it isquieter and more powerful than the average AIO solution.RadiatorAlphacool depends on a radiator made of pure copper. The base of the radiator is the popular Alphacool NexXxoS series, which is well-loved around the world. The pure copper construction raises the cooling performance enormously compared to the usual aluminium radiators used in classic AIOs. The slight thickness of the fins ensures enormous cooling power in fans with low rotational speed. This ensures that the performance of the “Eisbaer” when adjusting the fans down decreases much more slowly than in radiators with higher fin thickness.HosesThe flexible PVC hoses make installing the “Eisbaer” easy. These hoses are easier to arrange and move into the right position. So the hoses don’t bend and stop the flow of the water, both hoses have been fit-ted with anti-kink springs. The 11/8 mm size is also a standard in the water cooling field, alongside the 13/10 and 16/10.Quick-lock closureThe “Eisbaer” was designed with expandability directly in mind. This is why you’ll find a quick-lock closure on one of the hoses. This quick-lock mechanism is compatible with Alphacool HF quick-lock closures (1010383, 1010394, 1010395, 1010442), with which the circuit can easily be expanded to include anything from a radiator to a graphics card cooler. Furthermore, the “Eisbaer” is compatible with the upcoming Alphacool GPX-Pro graphics card AIO, which will use identical quick-lock closures.FansAlphacool's Core is a quiet and efficient fan with a wide control range up to 2500 rpm. The via PWM signal controllable fan is particularly well suited for radiators. The double-bearing fan axis is smooth running and enables a long service life as well as quiet operation.ConnectorsAll connectors are based on the classic G1/4 inch thread, the standard thread in the water cooling field. This way, all attachments can be switched out for others any time as desired. This also means that, for example, you could later decide to switch to thicker hoses or even HardTubes and set your system uniquely apart. All these features make the “Eisbaer” cooler into something extraordinary. Its enhanced appearance from the illuminated logo and the illuminated reservoir, which also contains the pump, lets the interior of your PC shine in a whole new way. The soft-touch surface of the pump case is a further visual highlight. PumpsThe basis of the pumps is the Alphacool DC-LT 2 Ceramic, also available separately. The pump runs extremely quietly and can be regulated to between 7 and 12V. It can also be regulated through the motherboard. If the “Eisbaer” is being run alone, the 7V setting will still have next to no performance loss, as shown in diverse test results. The insulated pump case further perfects the noise generation and ensures that vibrations are almost completely absorbed. The smooth and shiny polished copper base of the cooler ensures optimal heat absorption and can relay the heat over the fine slit structure of the cooler to the water quickly and efficiently. With the “Eisbaer”, you get an all-around perfect product that is not only extremely high-powered but also works very quietly.Notice for expansionPlease take care not to mix up the IN and OUT ports. On the “Eisbaer”, the “outlet” is marked in “red” and the “inlet” in “blue”. On the components to be connected, it is the opposite. The coupling with the “blue” marking denotes the “outlet” and the coupling with the “red” marking is the “inlet”. This is important as in many coolers the flow direction is crucial for optimal cooling performance.Note on applicationPlease use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well. Compatibility:AMD: 754 / 939 / 940 / AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5 / C32 / FM1 / FM2 / FM2+ / G34Intel: LGA 1150 / LGA 1151 / LGA 1156 / LGA 1200 / LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 755 Technical Details Pump (Alphacool DC-LT 2 2600 Ceramic)Speed2600 RPMVoltage6-13.5V DCPower consumption3,2WMaximum flow rate72 L/hMaximum head1 mhose length30 cmTechnical Details FansFansCoreBearinghydraulic BearingVoltageDC 12VPower connector4-Pin PWMRated Speed0 - 2500 rpm ±10%Max. Air Flow72.63 CFMMax. Static Pressure2.42 mm/H2O
The T.B.RGB fan applies exclusive ENERMAX LED LIGHTING Technology to deliver incredibly bright and even RGB lighting. With the patented Twister Bearing technology, the T.B.RGB fan can not only provide beautiful lighting effects, but also offer superior silent performance. T.B.RGB can be used as a standalone product with the included RGB controller or can be synchronised with supported RGB motherboards from Asus, Asrock, MSI and Gigabyte. T.B.RGB is the excellent RGB fan to create the right light and colour composition for your system. Technical Details Fan Quantity: 1x Bearing Type: Twister Bearing MTBF: 160,000h Number of Blades: 7 Fan Dimensions: 120 x 120 x 25mm Fan Speed: 500 – 1,500RPM Rated Voltage: 12V Rated Current Fan: 0.15 A Rated Current LED: 0.3 A Total Current Fan Pack: 1.35 A Max. Current Controller: 6 A Fan Connector: 6-pin Noise Level: 14 – 22dB(A) Air Flow: 23.29 – 80,75m3/h Air Flow: 13.71 – 47,53CFM Static Pressure: 1.66mm-H2O Scope of Delivery Included in the delivery: 4 x screw
The NF-A20 from Noctua, is a 200mm large premium fan. Due to its AAO (Advandced Acoustic Optimisation) frame, the fan has an even better performance, with quiet efficiency. A special feature is the PWN IC specially developed by Noctua for a fully automatic speed control, which makes the fans a little quieter at low revs. Together with the SSO2 bearing system, the fan has an excellent running smoothness and a high long-term stability. Technical Data: Dimensions: 200 x 200 x 30 mm (W x H x D) Material: Plastic Fan Speed (RPM): 800 rpm (min. 350 over PWM), with Low Noise Adapter: 550 rpm Airflow: 146.9 m³/h, with Low Noise Adapter: 100.8 m³/h Air Pressure: 1.08 mm H2O, with Low Noise Adapter: 0.51 mm H2O Fan Noise Level: 18.1 dB(A), with Low Noise Adapter: 10,7 dB (A) Voltage: 12 V Power consumption: 0.96 W, 0.08 A Connection: 4-pin PWM Life expectancy: 150,000 hours Accessories: 1x power adapter (L.N.A.), 4-pin Y-cable, 30 cm cable extension, 4x fan screws, 4x vibration inhibitor Manufacturer warranty: 6 years
