With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2500 rpm, it provides an air flow of 62.8 CFM, together with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5 Technical data radiator L x W x H 279 x 120 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 19 Fan size 120mm Fan slots 2 one-sided / 4 double-sided Color black Technical data fans L x W x H 120 x 120 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.23 (Max. 0.4) A Rated Power 2.76 (Max. 4.8) W Rated Speed 0 - 2500rpm/min (±10%) Max. Air Flow 62.8CFM Max.Static Pressure 2.13mm-H2O Noise level (rated voltage, mute room, distance 1m) 33.0 (Max. 34.3) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm
The CORSAIR RS140 MAX case fan is a high-performance cooling solution designed to meet the demands of enthusiasts and professionals. With its airflow range of 27.5 to 104 cfm, it ensures that your system remains cool under heavy loads. The fan's magnetic dome bearing provides a quiet operation with noise levels between 10 and 31 dBa, ensuring durability and reliability. Its 140 mm diameter is ideal for a wide variety of cases, offering flexibility in system building or upgrades. Additionally, the RS140 MAX features CORSAIR AirGuide technology, which channels airflow in a focused manner to cool critical components more efficiently. Support for Pulse-width modulation (PWM) allows for precise control over fan speed, enabling the balance between cooling and noise. The Zero RPM fan mode can completely stop the fan at low temperatures, eliminating noise for silent operation. Constructed from liquid-crystal polymer (LCP), this fan is built to last and perform at a high level, making it an excellent choice for cooling your system.
The new premium fan series is based on the NB-Blacksilent-Chassis and is equipped with the excellent electronics module NB-EKA Plus and NB-NanoSLI bearings. Both are features that were so far used only in the more complex Multiframe series. Besides the technologically advanced components this fan is also equipped with an individually adaptive cable management. The fan is shipped with a newly developed mounting kit for vibration-free mounting which consists of an optimized "NB-Silentframe" silicone frame with suitable counter-pieces and knurled nuts for tool-free installation. Technical specifications: Dimensions: 140x140x25mm Colour: Black Weight: 135g Nominal voltage: 12V Starting voltage: 4,5V Current draw: 0,09A Nominal speed: 1200rpm (+/-10%) Airflow: 93m³/h / 54,74CFM Noise emission: 20 dB(A) MTBF (25°C): 140000hrs Connector: 3-Pin Molex plug with rpm lead Extent of delivery: 1x Noiseblocker NB-BlackSilentPRO PK2 ( 140x140x25mm ) 1x Fan decoupling 1x 3 PIN fan extension 20cm 1x 3 PIN fan extension 50cm 4x Mounting screws 4x Knurled nuts This product has been reviewed for you: Hardware-academy Tech-Review
The Protium expansion tank from Singularity Computers is a 100mm tube with a diameter of 60mm. Together with the acrylic attachments, the expansion tank reaches a height of 139mm. It has a total of seven G1/4" ports and the tube itself is made of acrylic. Technical Data: Dimensions: 60 x 60 x 139 mm (L x W x H) Diameter: 60 mm Material: Acrylic (lid, base, reservoir), Aluminium (retention rings) Color: Silver, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 100 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
NZXT Quiet Airflow Fans offer high-performance, low-noise cooling for heat-prone PCs. Optimized blades and a chamfered frame provide powerful concentrated air, while fluid dynamic bearings and PWM control keep things quiet and efficient. Nine sickle-style blades are optimized to move large amounts of air, ensuring versatile use for intake or exhaust. Minimal gap between blade edges and frame maximizes the spinning area for higher airflow and reduced turbulence. Chamfered frame design directs air in a powerful concentrated flow pattern, traveling far into the case to cool vital components. Fluid dynamic bearings provide unwavering stability, low-noise operation, and a 60,000-hour lifespan. PWM control dynamically adjusts fan speed for higher output or lower noise based on system temperatures for efficient cooling. Sturdy frame with rubberized corners absorbs vibrations for low-noise operation, even at high speeds.
Tootekood: TG-MP8-100-100-20-1RGTIN: 753677507388Jahutid ja lisad
The high performance thermal pads of the Thermal Grizzly Minus Pad series consist of a very elastic and flexible surface area with very high thermal conductivity, compensating for even the smallest of gaps between components. Available in a variety of different sizes and thicknesses. High thermal conductivity High compressibility Electrical insulation The easy to process and flexible minus pads are made up of different constituents, based on a ceramic silicon formula complex and nano aluminum oxide. Thus, the pads ensure a constant, optimal heat transfer. The lightest of touches is enough to attach them optimally. All pads are ecofriendly and RoHS-compliant. Technical Data Temperature range: -100°C / +250°C Dimensions: 100 x 100 x 2mm
Whether used as a replacement or to modify the tube, the Protium reservoir can be used with all Protium items. Technical Data Length: 150 mm Outer diameter: 60 mm Material: Acrylic Compatibility Protium D5 pump attachment Protium D5/Reservoir Combo Protium reservoir
Hightech compact fans with bionic loop rotor (BionicLoopFan®). The special wing shape triggers turbulence in the air. This physical effect reduces the volume which is based on turbulances in the air flow and reduces energy consumption. With a straightened air flow and a higher Airflow these fans usually offers a higher overall cooling capacity over classical fans . Welcome to the future! - 100% developed in Germany - TÜV-certified sound level specifications = real data - extremely low-noise bionic loop rotor - bionic deep sound fan frame - position-invariant magnetic bearing NB-NanoSLI® 2 NEW! - silent NB-EKA P2 Drive NEW! - Bayer® Makrolon® rotor with anti-dust technology - weighted reinforced fibreglass PBT frame - NB cable management with two pluggable connection cables - Perfect results for PC casing, CPU cooling systems and radiator( higher cooling power at same revolution ratel) Technical Details: Dimensions: 140 x 140 x 25mm Number of Revolutions: 1.400 rpm Connection: 3 Pin Start / nominal voltage: 4V / 12V Volume: 28.7 dB(A) Performance: 178.3 m³ Scope of Delivery: 4 fine thread screws and knurled nuts for tool free assembly 4 NB silicone slics for vibration-free assembly each 2x 20 and 50 cm connection cable with textile sheath
Product information "KryoSheet - 0.2 mm - 68 x 51 mm" The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative for thermal compounds from the higher performance segment. Similar to Carbonaut pads, they have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet as a high-end product offers significantly higher thermal conductivity. This increased thermal conductivity is not only due to the choice of material, but also to the innovative manufacturing process. KryoSheet does not contain any liquid components and is therefore not subject to normal ageing as is the case with traditional thermal paste. Drying out is not possible. Outstanding thermal conductivity Easy to use Consistently high performance Extreme durability Attention: Electrically conductive! Follow instructions! The KryoSheet graphene pads have a molecular structure stacked in the Z-direction. This optimised structure enables outstanding and constant thermal conductivity. This is due to a specially developed manufacturing process in which the hexagonal crystal structure of the graphite is broken up along the basal plane in order to exploit the anisotropy of the graphite's thermal conductivity. However, as a side effect of this complex manufacturing process, the electrical conductivity is also increased and the stability of the KryoSheet pads is affected, so that the pads should only be used according to instructions! KryoSheet is available pre-assembled in various CPU/GPU standard sizes, e.g.: Note: Multiple use of KryoSheet is not recommended! When dismantling the cooler and handling the KryoSheet after use, microcracks may occur in the structure of the graphene pads, which may impair Performance.
The Arctic thermal pads are ideal for efficiently exchanging heat between different components. Thanks to the high quality of workmanship and excellent thermal conductivity, the pads are used in many places on computers and electronic components. The thermal pad, which is based on silicone and a special filler, far outperforms generic and performance-oriented pads. In a test by PC Games Hardware (11/2018), the "excellent processability and reusability in every respect" was praised. In combination with the fair price and good performance, our thermal pad was recommended as a "price-performance tip". Thanks to its low hardness and good compression properties, the thermal pad acts as a perfect gap filler and easily bridges uneven surfaces and air gaps. The ARCTIC Thermal Pads are non-adhesive and can therefore be placed precisely. Installation is child's play and therefore perfect for beginners. The pad contains no metal particles, is electrically insulating and not capacitive. Handling is therefore safe since contact with electrical parts does not lead to damage. Technical specifications: Dimensions 290 x 290 mm Contents 1 piece Thickness 0.5 mm Thermal conductivity 6.0 W / mK Hardness 25 shore 00 Relative density 3.2 g / cm³ colour blue Operating temperature -40 ~ 200 ℃ Volume resistance 1 X 1012 Ω-cm Interruption voltage 12 KV / mm Draw resistance 2.5 Kgf / cm² Elongation 45% Dielectric constant 14.1816 ε at 60 Hz 13.0264 ε at 1K Hz 13.0264 ε at 1M Hz Flammability V-0
Die R100B Reservoir’s der neuen ANTILA PURE-Serie von RAIJINTEK bieten einzigartige Regenbogen Effekte des A-RGB’s (5 V adressierbar) durch die eingebaute LED-Lichtkappe. Die Lösung befindet sich auf höchstem Niveau für PC-Enthusiasten und kundenspezifische PC-Modder, um ein Super-ARGB-LED-Effekt Wasser-kühlsystem zu erstellen. Die ANTILA PURE-Serie wird aus hochwertigem POM- und Echtglas hergestellt, um eine kristallklare, stabile, leise, leistungsstarke und langlebige Lösung zu bieten. Mit der ANTILA PURE-Serie können PC-Enthusiasten nicht nur ein bemerkenswert, wunderschönes Flüssigkeitskühlsystem bauen, sondern auch extern modulare Upgrades für ihr Gehäuse kombinieren. Eine robuste Montagehalterung bietet dem Benutzer auch eine zuverlässige, richtungsweisende Montagemöglichkeit und eine benutzerfreundliche Installation. Die ANTILA PURE-Serie ist das beste LED-Reservoir für Ihre Wasserkühlung Ihres Systems! Technische Daten: Anzahl: 1 Stück Dimensionen [l×b×h]: 77×77×173 mm Reservoir Dimensionen: 65×65×127 mm Kühlmittel Kapazität: 400 ml Material: POM + Glas + Aluminium + Stahl Material Gewicht: 780 g Schraubgewinde: G 1/4" Addressable LED: 12 LED Rainbow (4pin header, 2510 spec) – Addressable LED LED Control Method: Motherboard RGB HEADER/ Fernbedienung und RJK Control Box LED Input Connector: 4-PIN header (2.5 Crimp) LED Eingangsspannung: 5V
Schicker zylindrischer Ausgleichsbehälter, Röhre und Aufsätze aus transparentem Acryl, drei Aufsätze für flexible Anschlussmöglichkeiten, schwarze Sicherungsringe aus Aluminium
Schicker zylindrischer Ausgleichsbehälter, Röhre aus transparentem Acryl, Aufsätze mit mattem Finish, drei Aufsätze für flexible Anschlussmöglichkeiten, schwarze Sicherungsringe aus Aluminium
The Protium D5 pump housing from Singularity, is designed to enclose a D5 pump. Not only to look elegant, but above all to minimise pump noise. There are also openings in the cover, which are intended for cable routing. Technical Data Dimensions: 75 x 57 x 75 mm (B x H x T) Colour: Silver Material: Aluminium / Steel
All-in-one water cooling from InWin, 240mm radiator and copper plate, cooling block with striking nebula lighting, fans with integrated RGB lighting, high compatibility with Intel and AMD sockets
The CORSAIR iCUE Link LX120 RGB case fan is a high-performance cooling solution designed for desktop computers and servers. It features a 120 mm fan diameter and a magnetic bearing for quiet and efficient operation. With an airflow range of 9.75-69.9 cfm and air pressure of 0.13-5.22 mm, it provides exceptional cooling capabilities. The fan supports Pulse-width modulation (PWM) for precise speed control and includes a Zero RPM fan mode for silent operation at low temperatures. Additionally, the LX120 RGB is equipped with addressable RGB lighting and CORSAIR AirGuide technology, enhancing both the aesthetics and airflow direction of your system. The noise level is kept between 10 - 36 dBA, ensuring a quiet environment. With the included mounting kit and Corsair iCUE support, installation and customization are straightforward, making it an ideal choice for system modding and upgrading your cooling system.
During the development of the new BioniX P140 special emphasis was placed on a focused air flow and a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the BioniX P140 is particularly suitable for use on heat sinks, radiators as well as pinhole and filters. With a neodymium iron-boron magnetic ring of the latest generation, the BioniX P140 is significantly more efficient than its predecessors. Without sacrificing performance, this saves energy and significantly lowers the coil temperature of the engine. The operating noise of the newly developed ARCTIC engine is barely perceptible even at the lowest rpm. Thanks to sinusoidal magnetization, the motor of the P fans generates only 5% of the commutation frequency of a conventional DC motor. Thus, thanks to the even force distribution, there is no need for rubber buffering. Technical Details Fan: 140 mm, 200 - 1,950 rpm (PWM controlled) Air flow: 77.6 CFM / 131.92 m³ / h (@ 1,950 rpm) Noise level: 0.45 Sone (@ 1,950 rpm) Static pressure: 2.85 mm H2O (@ 1,950 rpm) Typical voltage: 12 V DC Cable length: 400 mm PST cable length: 50 mm
CL-W286-PL12SW-A, LGA1150/LGA1151/LGA1155/LGA1156/SAM1/SAM2/SAM3/SAM3+/SAM4/SFM2, Air flow 59.28 cfm, Noise level, max 28.2 dB, Dimensions 120 x 120 x 25 mm, Weight 1.24 kg
Connector: 4-pin Voltage Range: 5-12 V Colour: black Size: 21 x 25 x 48 mm Weight: 15 g Fan compatibility: all Noctua 12V PWM and 5V PWM fans, many third party PWM fans Scope of delivery: NA-FC1 controller NA-SC1 3-way splitter cable NA-EC1 input cable NA-AC4 input cable with power supply adaptor Tootjaleht: http://noctua.at/en/na-fc1/specification
Fan speed (max): 2000 Fan speed (min): 500 Air flow rates: 73.11 Number of fans: 1 Noise: 36 Dimensions: Radiator length 152 mm Radiator width 120 mm Radiator height 32 mm Pump length 66 mm Pump width 66 mm Pump height 43 mm Other features: Static pressure 2.93 InchH2O Rated voltage 12 VDC Material Plastic, Nylon, Copper, Rubber, Aluminium Noise level 21 - 36 dB Bearing type FDB(Fluid Dynamic Bearing) Lifetime 60 000 h Fan diameter 120 mm Illumination Yes Connectors 4-PIN, 3-PIN Illumination color RGB Backlight parts Pump Fan lifetime 60000 h
The Deepcool AK500 WH is a sleek white CPU air cooler compatible with a wide range of Intel and AMD sockets. Measuring 127mm in depth, 158mm in height, and 117mm in width, with a net weight of 1.04kg, it is designed to fit in most cases. This cooler operates quietly with a maximum noise level of 31.5 dB and a top fan speed of 1850 RPM, ensuring efficient cooling. It also comes with a 24-month warranty, promising reliability and performance.
