Firma: MT Shop

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler.Compatibility:- NVIDIA GeForce RTX 3070 Ti Founders Edition, 8GB GDDR6X, HDMI, 3x DP Technical data cooler L x W x H 187,97 x 123,09 x 33,95 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 11 Technical data backplate L x W x H 187,97 x 98,59 x 6 mm Material aluminium Color black

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.Fullcover Waterblock?The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.Chrome-plated copperThe cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.PumpThe Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.Fittings and TubingAs with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.ExpandabilityBy using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.Lighting and fansThe Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.NexXxoS RadiatorAs with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.Technical note!Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility:- Gainward GeForce RTX 4090 Phantom GS, 24GB GDDR6X (3413)- Gainward GeForce RTX 4090 Phantom, 24GB GDDR6X (3390)- Palit GeForce RTX 4090 GameRock OC, 24GB GDDR6X (NED4090S19SB-1020G)- Palit GeForce RTX 4090 GameRock, 24GB GDDR6X (NED4090019SB-1020G) Technical data radiatorDimensions (L x W x H)395 x 124 x 30mm (+/- 3%)Material cooling fins, chambers & channelsCopperMaterial threadsBrassMaterial outer housingstainless steelG 1/4“ threads2 x for tubes (+ 1x Fillport G1/4“)For fan size120 mmOptions for fan assembly3 x one-sided / 6 x both-sidedTechnical data cooler and pumpDimensions (L x W x H)214,91 x 154,79 x 47,62mmMaterial cooler bottomChrome plated copperMaterial cooler topacrylicThreads2 x G1/4“Pump typeDC-LT 2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13.5V DCPower consumption3.2WMTBF50.000 hTechnical data liquidColorclearIngredient 1Destilled water (CAS-number 7732-18-5)Ingredient 2Glysantin (CAS-number 1017-21-1)Working temperatures-15 C° / +90 °CTechnical data quick fastenersL x D95 x 27mmMaterialNylonFor tube size12,7 / 7,6mmColorBlackTechnical data fittingsL x D straight fitting24 x 18mmQuantity straight fittings2xL x B x H 90° fitting35 x 27 x 17mmQuantity 90° fittings2xFor tube size12,7 / 7,6mmMaterial fittingsBrassTechnical data tubeLength50cmMaterial tubeTPV (EPDM/PP)ColorMatt blackTube size12,7 / 7,6mmHardness grade35 Shore-A to 50 Shore-DWorking temperature-50 to +155 °CTechnical data fanSpeed0 - 2500 RPMStatic pressure3,17 mm H2OAir flow rate119,8 m³/hBearingsSleeve bearingFan connector4-Pin PWMConnection Digital aRGB3-Pin JST + 3-Pin 5VDimensions (L x W x H)120 x 120 x 25mmNet weight187gMax working temperature60°C

LGA1156, LGA1155, LGA1150, LGA1151, AM4, LGA1200, LGA1700, AM5) - Aluminium - 120 mm

Wasserkühlungs-Komplettset, beeinhaltet alle notwendigen Teile für eine CPU-Kühlung, inklusive Tubes, für Custom Wasserkühlungen

With the Core Storm water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop.Eisblock XPX Aurora CPU CoolerAlphacool's Eisblock XPX Aurora CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel.Core 100 Aurora Reservoir & VPP Apex PumpThe Core reservoir combines performance with design. The reservoir tube is made of acrylic, while the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the expansion tank a subtle appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. The pump's speed can be read out via the 4-pin fan connector and controlled via PWM signal. The Apex VPP is supplied with power via a SATA connector.NexXxoS XT45 Full Copper 240mm Radiator V.2All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS XT45 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop.Rise Aurora 120mm fansThe fans can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m3/h) coupled with high static pressure (3.17mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 20 digitally addressable 5V RGB LEDs that illuminate the entire fan.AlphaTube HF 13/10mm tubing & HF G1/4" quick connect couplingThe clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop.Eiszapfen 13/10mm G1/4" ConnectionsAll the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off.Thermal Paste & CoolantThe included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle.aRGB Controller, Cables, Tools & AccessoriesAll cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately. Compatibility:Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 Technical data CPU coolerDimensions (L x W x H)75,8 x 75,8 x 33mmMaterial coolernickel-plated copperMaterial housingnylon, acrylicThreads2 x G1/4“Illumination3-Pin 5V, 15 digital aRGB LEDsMax working temperature60°CPressure tested0,8 BarTechnical data reservoirDimensions (L x W x H)131 x 76,5 x 76,5mmCapacity200 mlMaterial Pump top & coveracetalMaterial tubeacrylicThreads3x G1/4“ ITIllumination3-Pin 5V, 12 digital aRGB LEDsMax working temperature60°CPressure tested0,8 BarTechnical data pumpDimensions (L x W x H)65 x 65 x 41mmMaterialsynthetic material, aluminium, ceramicsThreads4-Pin PWM | SATARotational speed2500 - 4500 RPMOperating voltage8-13V DC / 14W IP32Starting voltage12V DCMaximum pumping head4,25mMaximum flow rate340L/hMax working temperature60°CPressure tested0,8 BarTechnical data radiatorDimensions (L x W x H)271,5 x 124 x 45mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4"Possible fan size120mmPossible fan assembly2x one-sided / 4x both-sidedFin density12Max working temperature60°CPressure tested0,8 BarTechnical data fanDimensions (L x W x H)120 x 120 x 25mmSpeed0 - 2500 RPM (+/- 10%)Threads4-Pin PWMVoltage12V DCCurrent consumption0,65A (0,72 max)Static pressure3,17 mm H2OMax. air flow118,9 m³/hNoisemax. 31,5 dB(A)Speedometer signalyesAuto-RestartyesIllumination3-Pin 5V, 20 digital aRGB LEDs, 3.5WTechnical data tubeDimensions (outer/inner)13/10mmMaterialPVCLength3mColorclearTechnical data 13/10mm G1/4" fittingsMaterialbrassThreads1x G1/4" OT | 1x tube connection 13/10mmColorblackTechnical data quick release couplingDimensions (L x D)60,3 x 26,1mmMaterialsynthetic materialThreads2x G1/4“ ITColorblackTechnical data coolantIngredientsosmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%)Boiling point105°CFreezing point-10°CPackaging unit1L bottleColorclear (not UV-active)Technical thermal greaseViscosity (mPa. s)3.000.000Specific Gravity (g/cm³)2,7Thermal Conductivity (w/m-K)16Temperature Stability (Degree Celcius)-50 ~ 200Colorgray

The Alphacool Aurora Acryl GPX-N RTX 3090 FE Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3090 FE graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3090 FE cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3090 FE Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3090 FE Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3090 FE also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3090 FE Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate - The Founders Edition, does NOT correspond to the Reference Design! Technical data: L x W x B: 120,7 x 231,5 x 29,2 mm Material cooler: Nickle plated copper Material top: Acryl Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards Compatibility list: - NVIDIA GeForce RTX 3090 FE Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3090 FE with Backplate Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3090 FE with Backplate

With the Core Storm water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop. Eisblock XPX Aurora CPU Cooler Alphacool's Eisblock XPX Aurora CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel. Core 100 Aurora Reservoir & VPP Apex Pump The Core reservoir combines performance with design. The reservoir tube is made of acrylic, while the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the expansion tank a subtle appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. The pump's speed can be read out via the 4-pin fan connector and controlled via PWM signal. The Apex VPP is supplied with power via a SATA connector. NexXxoS ST30 Full Copper 240mm Radiator V.2 All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS ST30 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop. Rise Aurora 120mm fans The fans can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m3/h) coupled with high static pressure (3.17mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 20 digitally addressable 5V RGB LEDs that illuminate the entire fan. AlphaTube HF 13/10mm tubing & HF G1/4" quick connect coupling The clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop. Eiszapfen 13/10mm G1/4" Connections All the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off. Thermal Paste & Coolant The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle. aRGB Controller, Cables, Tools & Accessories All cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately.   Compatibility: Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700 AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5   Technical data CPU cooler Dimensions (L x W x H) 75,8 x 75,8 x 33mm Material cooler nickel-plated copper Material housing nylon, acrylic Threads 2 x G1/4“ Illumination 3-Pin 5V, 15 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data reservoir Dimensions (L x W x H) 131 x 76,5 x 76,5mm Capacity 200 ml Material Pump top & cover acetal Material tube acrylic Threads 3x G1/4“ IT Illumination 3-Pin 5V, 12 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data pump Dimensions (L x W x H) 65 x 65 x 41mm Material synthetic material, aluminium, ceramics Threads 4-Pin PWM | SATA Rotational speed 2500 - 4500 RPM Operating voltage 8-13V DC / 14W IP32 Starting voltage 12V DC Maximum pumping head 4,25m Maximum flow rate 340L/h Max working temperature 60°C Pressure tested 0,8 Bar Technical data radiator Dimensions (L x W x H) 271,5 x 124 x 30mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" Possible fan size 120mm Possible fan assembly 2x one-sided / 4x both-sided Fin density 15 Max working temperature 60°C Pressure tested 0,8 Bar Technical data fan Dimensions (L x W x H) 120 x 120 x 25mm Speed 0 - 2500 RPM (+/- 10%) Threads 4-Pin PWM Voltage 12V DC Current consumption 0,65A (0,72 max) Static pressure 3,17 mm H2O Max. air flow 118,9 m³/h Noise max. 31,5 dB(A) Speedometer signal yes Auto-Restart yes Illumination 3-Pin 5V, 20 digital aRGB LEDs, 3.5W Technical data tube Dimensions (outer/inner) 13/10mm Material PVC Length 3m Color clear Technical data 13/10mm G1/4" fittings Material brass Threads 1x G1/4" OT | 1x tube connection 13/10mm Color black Technical data quick release coupling Dimensions (L x D) 60,3 x 26,1mm Material synthetic material Threads 2x G1/4“ IT Color black Technical data coolant Ingredients osmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%) Boiling point 105°C Freezing point -10°C Packaging unit 1L bottle Color clear (not UV-active) Technical thermal grease Viscosity (mPa. s) 3.000.000 Specific Gravity (g/cm³) 2,7 Thermal Conductivity (w/m-K) 16 Temperature Stability (Degree Celcius) -50 ~ 200 Color gray

With the Core Storm water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop. Eisblock XPX Aurora CPU Cooler Alphacool's Eisblock XPX Aurora CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel. Core 100 Aurora Reservoir & VPP Apex Pump The Core reservoir combines performance with design. The reservoir tube is made of acrylic, while the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the expansion tank a subtle appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. The pump's speed can be read out via the 4-pin fan connector and controlled via PWM signal. The Apex VPP is supplied with power via a SATA connector. NexXxoS XT45 Full Copper 360mm Radiator V.2 All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS XT45 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop. Rise Aurora 120mm fans The fans can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m3/h) coupled with high static pressure (3.17mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 20 digitally addressable 5V RGB LEDs that illuminate the entire fan. AlphaTube HF 13/10mm tubing & HF G1/4" quick connect coupling The clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop. Eiszapfen 13/10mm G1/4" Connections All the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off. Thermal Paste & Coolant The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle. aRGB Controller, Cables, Tools & Accessories All cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately.   Compatibility: Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5   Technical data CPU cooler Dimensions (L x W x H) 75,8 x 75,8 x 33mm Material cooler nickel-plated copper Material housing nylon, acrylic Threads 2 x G1/4“ Illumination 3-Pin 5V, 15 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data reservoir Dimensions (L x W x H) 131 x 76,5 x 76,5mm Capacity 200 ml Material Pump top & cover acetal Material tube acrylic Threads 3x G1/4“ IT Illumination 3-Pin 5V, 12 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data pump Dimensions (L x W x H) 65 x 65 x 41mm Material synthetic material, aluminium, ceramics Threads 4-Pin PWM | SATA Rotational speed 2500 - 4500 RPM Operating voltage 8-13V DC / 14W IP32 Starting voltage 12V DC Maximum pumping head 4,25m Maximum flow rate 340L/h Max working temperature 60°C Pressure tested 0,8 Bar Technical data radiator Dimensions (L x W x H) 391,5 x 124 x 45mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" Possible fan size 120mm Possible fan assembly 3x one-sided / 6x both-sided Fin density 12 Max working temperature 60°C Pressure tested 0,8 Bar Technical data fan Dimensions (L x W x H) 120 x 120 x 25mm Speed 0 - 2500 RPM (+/- 10%) Threads 4-Pin PWM Voltage 12V DC Current consumption 0,65A (0,72 max) Static pressure 3,17 mm H2O Max. air flow 118,9 m³/h Noise max. 31,5 dB(A) Speedometer signal yes Auto-Restart yes Illumination 3-Pin 5V, 20 digital aRGB LEDs, 3.5W Technical data tube Dimensions (outer/inner) 13/10mm Material PVC Length 3m Color clear Technical data 13/10mm G1/4" fittings Material brass Threads 1x G1/4" OT Color black Technical data quick release coupling Dimensions (L x D) 60,3 x 26,1mm Material synthetic material Threads 2x G1/4“ IT Color black Technical data coolant Ingredients osmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%) Boiling point 105°C Freezing point -10°C Packaging unit 1L bottle Color clear (not UV-active) Technical thermal grease Viscosity (mPa. s) 3.000.000 Specific Gravity (g/cm³) 2,7 Thermal Conductivity (w/m-K) 16 Temperature Stability (Degree Celcius) -50 ~ 200 Color gray

With the Core Storm water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop. Eisblock XPX Aurora CPU Cooler Alphacool's Eisblock XPX Aurora CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel. Core 100 Aurora Reservoir & VPP Apex Pump The Core reservoir combines performance with design. The reservoir tube is made of acrylic, while the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the expansion tank a subtle appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. The pump's speed can be read out via the 4-pin fan connector and controlled via PWM signal. The Apex VPP is supplied with power via a SATA connector. NexXxoS ST30 Full Copper 420mm Radiator V.2 All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS ST30 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop. Rise Aurora 140mm fans The fans can be controlled from 0 to 2000 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (154.1 m3/h) coupled with high static pressure (2.20 mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 24 digitally addressable 5V RGB LEDs that illuminate the entire fan. AlphaTube HF 13/10mm tubing & HF G1/4" quick connect coupling The clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop. Eiszapfen 13/10mm G1/4" Connections All the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off. Thermal Paste & Coolant The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle. aRGB Controller, Cables, Tools & Accessories All cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately.   Compatibility: Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700 AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5   Technical data CPU cooler Dimensions (L x W x H) 75,8 x 75,8 x 33mm Material cooler nickel-plated copper Material housing nylon, acrylic Threads 2 x G1/4“ Illumination 3-Pin 5V, 15 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data reservoir Dimensions (L x W x H) 131 x 76,5 x 76,5mm Capacity 200 ml Material Pump top & cover acetal Material tube acrylic Threads 3x G1/4“ IT Illumination 3-Pin 5V, 12 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data pump Dimensions (L x W x H) 65 x 65 x 41mm Material synthetic material, aluminium, ceramics Threads 4-Pin PWM | SATA Rotational speed 2500 - 4500 RPM Operating voltage 8-13V DC / 14W IP32 Starting voltage 12V DC Maximum pumping head 4,25m Maximum flow rate 340L/h Max working temperature 60°C Pressure tested 0,8 Bar Technical data radiator Dimensions (L x W x H) 455,5 x 144 x 30mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" Possible fan size 140mm Possible fan assembly 3x one-sided / 6x both-sided Fin density 15 Max working temperature 60°C Pressure tested 0,8 Bar Technical data fan Dimensions (L x W x H) 140 x 140 x 25mm Speed 0 - 2000 RPM (+/- 10%) Threads 4-Pin PWM Voltage 12V DC Current consumption 6,6 Watt (max) Static pressure 2,20 mm/H2O Max. air flow 154,1 m³/h Noise max. 38,4 dB(A) Speedometer signal yes Auto-Restart yes Illumination 3-Pin 5V, 24 digital aRGB LEDs, 3.5W Technical data tube Dimensions (outer/inner) 13/10mm Material PVC Length 3m Color clear Technical data 13/10mm G1/4" fittings Material brass Threads 1x G1/4" OT | 1x tube connection 13/10mm Color black Technical data quick release coupling Dimensions (L x D) 60,3 x 26,1mm Material synthetic material Threads 2x G1/4“ IT Color black Technical data coolant Ingredients osmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%) Boiling point 105°C Freezing point -10°C Packaging unit 1L bottle Color clear (not UV-active) Technical thermal grease Viscosity (mPa. s) 3.000.000 Specific Gravity (g/cm³) 2,7 Thermal Conductivity (w/m-K) 16 Temperature Stability (Degree Celcius) -50 ~ 200 Color gray

It's the best system because it's your system, strive for perfection! The new Alphacool NexXxoS UT60 X-Flow Server Radiators help you to get one step closer! Increase the performance of your system with the new Alphacool NexXxoS UT60 X-Flow Server Radiators. This Radiator can discharge up to 660 W at an ambient temperature of 30°C and fans with 6500 rpm. X-Flow – Find the easy routeFor the best possible cooling of your system, Alphacool relies on the X-Flow for the new NexXxoS server radiators. The flow runs from one side of the radiator to the other and directly uses all fins. Your Alphacool NexXxoS UT60 X-Flow immediately achieves the best possible cooling with optimized water circulation. Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has countersunk the screw plugs. This unique design allows you to stay flexible with the positioning of your Alphacool NexXxoS UT60 X-Flow Radiator. Mount your radiator the way you need it. Thanks to the multiple inlets and outlets, you have more options to create something unique and more importantly efficient. Solid copper - the best performance at the highest levelThe radiator of the new Alphacool NexXxoS series is also made of solid copper ensuring the radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same qualityThe new Alphacool NexXxoS UT60 X-Flow is available in different sizes and thicknesses. All radiators of this series are compatible with 2U server racks. Thanks to the special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. Technical Details Dimensions (LxWxH): 284 x 80 x 60mm Net weight: 900g Maximum working temperature: 180°C Material (fins/channels/pre-chamber): Copper Material external housing: Steel Threads: 6x G1/4" Mounting option radiator: 8x M3 threads Fan size: 80mm Fan slots: 3 single-sided / 6 double-sided Fan threads: M3 Pressure-tested: 1,5 bar Certificates: CE, FC, ROHS Scope of Delivery 1x Alphacool NexXxoS UT60 Full Copper X-Flow 80mm Triple Radiator Mounting material Datasheet Manual

The CORSAIR iCUE H100i ELITE LCD XT liquid cooling offers powerful, customized cooling for your processor, along with a personalized LCD screen that displays GIFs, images, and system information.

The CORSAIR iCUE H150i ELITE LCD XT Liquid CPU Cooler delivers powerful, customized cooling for your CPU, with a personalized LCD screen that displays GIFs, images, and system information.

Komplettes WaKü-Set für AMD-CPUs, mit 240 mm großem Slim-Radiator, zwei 120-mm-ARGB-Lüfter, 150 mm großer Ausgleichsbehälter, inkl. Soft-Tubes und Fittinge, transparentes Kühlmittel

All-in-One Wasserkühlung, hohe Effizienz, für Intel LGA 4677 Sockel entwickelt, vernickelter Kupferkühler

MASTERLIQUID ATMOS Cooler Master is unveiling the next generation of liquid cooling engineering with the MasterLiquid Atmos, our new AIO liquid cooler. 360 Degrees of CoolThe next generation AIO liquid cooling is here with the MasterLiquid 360 Atmos White. The Atmos is our forward-thinking, innovative take on what an AIO cooler can and should be. Exceptionally silent performance provided by our SickleFlow Edge fans. An optimized user experience from unboxing to the MasterCTRL software. A pump top cover fully customizable with your own 3D-printed creations. Eco-friendly construction implemented throughout. Our signature dual chamber pump design, refined. The Atmos represents the best of the best in modern AIO liquid cooling, a full 360 degrees of cool. FULLY CUSTOMIZABLECustomize the pump top cover with your 3D designs and take full control of the ARGB Gen 2 lighting. The Atmos provides unprecented creative freedom. LATEST SICKLEFLOW EDGE 120 FANSOur in-house desPre-installed SickleFlow Edge 120mm fans further improve cooling performance and simplify user installation.igned and manufactured premium fan comes with enhanced blades for next-level airflow and cooling performance.

MASTERLIQUID 360 ATMOS WHITE AIO LIQUID COOLER Cooler Master is unveiling the next generation of liquid cooling engineering with the MasterLiquid 360 Atmos White, our new AIO liquid cooler. 360 Degrees of CoolThe next generation AIO liquid cooling is here with the MasterLiquid 360 Atmos White. The Atmos is our forward-thinking, innovative take on what an AIO cooler can and should be. Exceptionally silent performance provided by our SickleFlow Edge fans. An optimized user experience from unboxing to the MasterCTRL software. A pump top cover fully customizable with your own 3D-printed creations. Eco-friendly construction implemented throughout. Our signature dual chamber pump design, refined. The Atmos represents the best of the best in modern AIO liquid cooling, a full 360 degrees of cool. FULLY CUSTOMIZABLECustomize the pump top cover with your 3D designs and take full control of the ARGB Gen 2 lighting. The Atmos provides unprecented creative freedom. LATEST SICKLEFLOW EDGE 120 FANSOur in-house desPre-installed SickleFlow Edge 120mm fans further improve cooling performance and simplify user installation.igned and manufactured premium fan comes with enhanced blades for next-level airflow and cooling performance.

ROG STRIX LC II 360 ARGB WHITE EDITION ROG Strix LC II 360 ARGB White Edition all-in-one liquid CPU cooler with Aura Sync, Intel®> LGA 1700/1200/1150/1151/1152/1155/1156/2011/2011-3/2066 and AMD AM4/TR4 support and three ROG 120 mm addressable RGB radiator fans Seventh Gen Asetek pump delivers exceptional cooling and minimal noise with an operating range starting at 840 rpm. Three ROG-designed radiator fans provide optimized airflow and static pressure. ARGB lighting on the NCVM-coated pump cover and the radiator fans conveys a sleek, modern design. Aesthetic perfectly complements ROG motherboards from center stage. Reinforced, sleeved tubing offers increased durability.

Thermaltake CL-W322-PL12GM-A

Inter-Tech jahutus Q-3 1HE Active Intel Socket LGA 1700

Zwei gewinkelte 90-Grad-Adapter XF Hardline Fittinge, für 14-mm-Hard-Tubes, aus der Corsair Hydro X-Serie, Weiß

Fillport für Wasserkühlungen, zur Montage an der Oberseite des Gehäuses, einfache Befüllung, G1/4 Zoll Anschluss

Drehbarer 45-Grad-Winkel-Adapter von EK Water Blocks, Teil der EKWB Quantum-Linie, zur Verbindung von G1/4-Zoll-Außen- mit G1/4-Zoll-Innengewinden, Silber (Nickel)

Drehbarer 45-Grad-Winkel-Adapter von EK Water Blocks, Teil der EKWB Quantum-Linie, zur Verbindung von G1/4-Zoll-Außen- mit G1/4-Zoll-Innengewinden, vergoldet

ES compression fitting made of brass in 90° angle, rotatable with 1/4" thread for a hose thickness of 8/5mm. Optimized for server and workstation systems. Technical dataDimensions (L x W x H)30 x 16 x 28mmMaterialBrassWeight33gThreadG1/4"Tube thickness8/5mmColorblackWarranty: 5 years???? Warranty Terms

ES compression fitting made of brass in 90° angle, rotatable with 1/4" thread for a hose thickness of 5/3mm. Optimized for server and workstation systems. Technical dataDimensions (L x W x H)30 x 16 x 28mmMaterialMessingWeight27gThreadG1/4"Tube thickness5/3mmColorblackWarranty: 5 years???? Warranty Terms

The Alphacool Core Sensor allows you to show temperature of the fluid inside your cooling loop. Thanks to the available colour display, the temperature can be read either in degrees Celsius or Fahrenheit.Integration made easyThe sensor is flat as well as flexible and allows easy mounting on the component to be monitored.Temperature sensor & displayA classic NTC 10 kOhm thermistor is used as the sensor. The cable of the temperature sensor with a length of approx. 100 cm offers enough possibilities for a comfortable installation. Power is supplied via a 55 cm long cable with one male and one female 4-pin Molex connector. The readable temperature range is between -50 and 110 °C with a possible deviation of 0.1 °C. The display has a colour scale to keep track of critical temperature ranges at any time. Additional software for reading out the temperature ranges is not required.Download kOhm Sensor Table Alphacool Technical dataDimensions display47,8 x 28,2 x 16,7 mmTyp Displaymulti-coloured, indication optionally in ° C or FahrenheitSensor typeNTC 10 kOhm thermistorPower connection4-Pol-Molex (12 V)Power cable length550 mmLength sensor cable1000 mmTemperature measuring range-50 bis +110 Grad CelsiusColorBlack

The Alphacool ES quick-release connector is optimized for use in server and workstation systems. It is characterized by precise manufacturing quality, excellent water flow and a secure click mechanism for sealing.Maximum flow rateOther quick couplings can negatively affect the flow of water. The quick coupling has therefore been fundamentally redesigned so that the water flow is hardly disrupted. Particular emphasis was placed on minimal processing tolerances.Quick and easyThe ES quick connectors from Alphacool simplify the assembly of server and workstation systems. Thanks to the convenient handling, complex systems can be connected quickly and easily. To open the quick-release fastener, the outer ring is pulled back. The seal closes immediately and prevents coolant from escaping. To lock the quick-release fasteners, simply push them into each other. A clicking noise confirms secure locking.Note: To avoid damaging the O-ring, do not open or close the quick-release fastener when it is dry. Technical dataDimensions (L x D)67 x 28mmWeight140gMaterielnickel-plated brass, plasticThread2x 1/4" OTColorchrome, black

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.Fullcover Waterblock?The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.PumpThe Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.Fittings and TubingAs with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.ExpandabilityBy using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.Lighting and fansThe Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.NexXxoS RadiatorAs with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.Technical note!Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility:- MSI Radeon RX 6800 Gaming X Trio 16G, 16GB GDDR6- MSI Radeon RX 6800 XT Gaming X Trio 16G, 16GB GDDR6 Data radiatorL x W x H395 x 124 x 30mm (+/- 3%)Material cooling finsCopperMaterial chambersCopperMaterial cooling channelsCopperMaterial threadsBrassMaterial outer housingstainless steelG 1/4“ threads2 x for tubes (+ 1x Fillport G1/4“)For fan size120 mmPossible fan assembly3 x one-sided / 6 x both-sidedData cooler and pumpL x W x H295 x 152 x 46 mmMaterial cooler bottomChromel plated copperMaterial cooler topPMMAThreads2 x G1/4“Pump typeDC-LT 2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13.5V DCPower consumption3.2WMTBF50.000 hData liquidColorclearIngredient 1Destilled water (CAS-number 7732-18-5)Ingredient 2Glysantin (CAS-number 1017-21-1)Working temperatures-15 C° / +90 °CData quick fastenersL x D95 x 27 mmMaterialNylonFor tube size12,7 / 7,6 mmColorBlackData fittingsL x D straight fitting24 x 18 mmQuantity straight fittings2xL x B x H 90° fitting35 x 27 x 17 mmQuantity 90° fittings2xFor tube size12,7 / 7,6 mmMaterial fittingsBrassData tubeLength50 cmMaterial tubeTPV (EPDM/PP)ColorMatt blackTube size12,7 / 7,6 mmHardness grade35 Shore-A to 50 Shore-DWorking temperature-50 to +155 °CData fanSpeed0 - 2500 RPMStatic pressure3,17 mm H2OAir flow rate119,8 m³/hBearingsSleeve bearingFan connector4-Pin PWMConnection Digital aRGB3-Pin JST + 3-Pin 5VDimensions120 x 120 x 25 mmNet weight187 gMax working temperature60 °C

Alphacool Eisflügel: The flow indicator with extra value! A water cooling system inside a computer is also there to make an impact on the overall appearance. Neatly laid hoses or HardTubes make for an impressive picture. With the Alphacool Eisflügel, you can add another real eye-catcher to your system. The fan’s silent rotation will always show the direction of the flow. Technical Details: Dimensions: 88 x 40 x 15mm Compression resistant up to 2 bar, max. Connection: for hoses with 6-11mm inner diameter Material: SAN or PMP Operating temperature (according to manufacturer): PMP up to max. +60°C (and good chemical resistance), SAN up to max. 30°C. Scope of Delivery: 1x Alphacool Eisfluegel flow indicator blue 6-11mm - plexi

The D-Plug from Alphacool's ENTERPRISE SOLUTIONS series with 2 G1/4" male threads offers the possibility to connect components like GPU and CPU coolers or radiators within a water circuit. What's New?Compared to double nipples or similar adapters, the ES D-Plug is plugged and not screwed. The necessary stability is provided by two closely fitting O-rings on the Male component of the connector. Of course, the connector has been extensively tested in the Alphacool lab with the result that the D-Plug is stable up to 1.5 Bar. UsesAlphacool's ES D-Plug allows for easy connection of water cooling components such as graphics card and CPU coolers or radiators to each other. Since the connector is only plugged in and not screwed, easy installation or quick replacement are uncomplicated. The ES D-Plug has a variable length. By pulling the connector apart, an extension of up to 15 mm can be achieved. This flexibility allows compensation for inaccuracies in the system design and prevents hoses from twisting during assembly. With the use of the D-Plug, the connection of water cooling elements is possible even in the tightest spaces.The right size for every applicationThe ES D-Plug is available in lengths of 20 mm, 25.5 mm and 31.5 mm. They come in multiple colors such as brilliant chrome or matte black. Replacement O-rings in three different colors are included.Application notesTo ensure the required stability and tightness of the connection, both O-rings of the Male component must be fully recessed in the Female component. Technical dataMaterialBrassColorChromeLength31,5 mmDiameter20 mmThreadG1/4“ OTThread length (incl. O-ring)5 mmWeight55 gPressure tested1,5 Bar

Alphacool Eisflügel: The flow indicator with extra value! A water cooling system inside a computer is also there to make an impact on the overall appearance. Neatly laid hoses or HardTubes make for an impressive picture. With the Alphacool Eisflügel, you can add another real eye-catcher to your system. The fan’s silent rotation will always show the direction of the flow. Technical Details Dimensions: 88 x 40 x 15mm Compression resistant up to 2 bar, max. Connection: for hoses with 6-11mm inner diameter Material: ABS Scope of Delivery 1x Alphacool Eisfluegel flow indicator red 6-11mm - plexi

Alphacool Eisfluegel: The flow indicator with extra value! A water cooling system inside a computer is also there to make an impact on the overall appearance. Neatly laid hoses or HardTubes make for an impressive picture. With the Alphacool Eisfluegel, you can add another real eye-catcher to your system. The fan’s silent rotation will always show the direction of the flow. Technical Details Dimensions: 69,5 x 41 x 17mm Compression resistant up to 2 bar, max. Connection: G1/4" connection with internal thread Material: ABS Scope of Delivery 1x Alphacool Eisfluegel flow indicator black G1/4 inner thread - plexi

120-mm PWM fan in a 3-pack, unique plug-in system for less cable clutter, with addressable RGB LEDs, up to 2,000 RPM with a maximum airflow of 131.33 m³/h, maximum static pressure of 2.97 mmH2O

You may have already seen the Alphacool Eiszyklon Aurora LUX Pro fan on the Alphacool Eisbaer Aurora series. It offers a wide control range as well as outstanding digital RGB LED lighting. The individually controllable 5V aRGB LEDs paired with the special design of the fan frame create unique effects.Ingenious LightingThe frame is equipped with digital addressable 5V RGB LEDs which illuminate the whole frame. The frame is not completely transparent, but the illumination is done through narrow slits in four places. On the upper side there are two rows of these slits. Each narrow frame runs along the inside and outside of the frame. This creates a unique illumination which looks very noble. Thanks to the recessed light diffusers the light is distributed evenly. This means that Individual LEDs are no longer visible.Wide Control Range and SilentThe fan can be controlled from 600 to 1500 rpm via the 4-pin PWM connector. At 600 rpm the fan is almost silent, but still offers a good airflow rate as well as a high static pressure. Therefore, the fan can also be used very well on radiators for a water cooling system. Thanks to the high airflow, the fan is also ideal for ventilating a case. Decouplers are also found directly on the frame. The soft foam padding reduces the transmission of vibrations to the case. A further plus point for the silent capability of the fan.Connections?The fan is controlled via a 4-pin PWM connector. The cable is 50 cm long. This allows the fan to be connected to the mainboard or a special controller without any additional adapter cables or extensions. The digital aRGB LED lighting is controlled via a JST 3-pin connector. Technical dataSpeed600-1500 RPMStatic pressure1,6 mm/H2OAir flow rate71 m³/hBearingsHydraulicFan connector4-Pin PWMConnection Digital aRGB3-Pin JST + 3-Pin 5VQuantity Digital aRGB LED16Dimensions140 x 140 x 25 mmNet weight180 gMax working temperature60 °CPower consumption2 WNoise12-38 dB(A)MTBF50.000hWarranty: 3 years???? Warranty Terms

120mm PWM fan from Lian Li in a 3-pack, unique plug-in system, improved daisy-chaining, with addressable RGB LEDs, max. 2600 RPM, max. 153.1 m³/h airflow, and max. 3.97 mmH2O static pressure, Note: Requires Lian Li 12TL fan controller.

Alphacool Eisbaer bracket for AMD Ryzen S. AM4/AM5 Notice: The Alphacool bracket for AMD Ryzen S. AM4/AM5 is compatible with all Eisbaer and XPX CPU coolers. Scope of Delivery: 1x Alphacool Eisbaer bracket for AMD Ryzen S. AM4/AM5 Eisbaer AM4/AM5 Socket Mounting