The new premium fan series is based on the NB-Blacksilent-Chassis and is equipped with the excellent electronics module NB-EKA Plus and NB-NanoSLI bearings. Both are features that were so far used only in the more complex Multiframe series. Besides the technologically advanced components this fan is also equipped with an individually adaptive cable management. The fan is shipped with a newly developed mounting kit for vibration-free mounting which consists of an optimized "NB-Silentframe" silicone frame with suitable counter-pieces and knurled nuts for tool-free installation. Technical specifications: Dimensions: 120x120x25mm Colour: Black Weight: 120g Nominal voltage: 12V Starting voltage: 4,5V Current draw: 0,16A Nominal speed: 1400rpm (+/-10%) Airflow: 96m³/h / 56,506CFM Noise emission: 20 dB(A) MTBF (25°C): 160000hrs Connector: 3-Pin Molex plug with rpm lead Extent of delivery: 1x Noiseblocker NB-BlackSilentPRO PL2 ( 120x120x25mm ) 1x Fan decoupling 1x 3 PIN fan extension 20cm 1x 3 PIN fan extension 50cm 4x Mounting screws 4x Knurled nuts Tech-Review has tested this product for you!
StarTech.com FANBOX12. Sobilik: Arvuti korpus, Tüüp: Ventilaator, Ventilaatori läbimõõt: 12 cm. Toote värv: Must, Materjal: Plast, Kaabli pikkus: 0,3 m. Pinge: 12 V. Laius: 25 mm, Sügavus: 120 mm, Kõrgus: 120 mm
FQ141 represents SilverStone’s pursuit of a design that balances performance and tranquility. Its included PWM module allows motherboard to control fan speed and regulate the temperature inside your chassis with optimal efficiency. It has custom designed dual fan blades for increased air pressure performance without additional noise. These features not only improve ventilation but also decrease operating noise.SobilikArvuti korpusTüüpVentilaatorVentilaatori läbimõõt14 cmToetatud protsessoripesadEi ole toetatudÜhilduvad protsessoriseeriadEi ole toetatudPöörlemiskiirus (min)500 RPMPöörlemiskiirus (max)1000 RPMMüratase (aeglane kiirus)14,7 dBMüratase (suur kiirus)20,7 dBMinimaalne õhuvool31,4 cfmMaksimaalne õhuvool62 cfmMinimaalne õhusurve0,28 mmH2OMaksimaalne õhusurve1,21 mmH2OKeskmine tõrkeintervall (MTBF)150000 hToote värvSinine, ValgeMaterjalPlastPinge12Nimivool0,11 AVentilaatori mõõdud (laius x sügavus x kõrgus)140 x 140 x 25 mmVentilaatori kaal133 g
The Ultra Quiet AK-CCE-7105EP uses a high engineering omni directional heatsink providing efficient CPU and motherboard zone cooling. The Enter bearing 9cm fan uses Intel approved power management (PWM) where speed is regulated automatically by CPU usage. Under normal conditions the CPU fan speed is low ensuring low noise computing.Dual mounting using an extra-safe screws with backplate. Two motherboard backplates for LGA775 & LGA115X are included. AK-CCE-7105EP is designed to work with Intel CPU’s up to 95W but greater cooling efficiency can be attained with efficient case airflow. High performance thermal interface is pre-applied.- High engineered aluminium heatsink for cost effective performance- Bi-ped fins maximise heat dissipation- Ultra Quiet Enter bearing PWM fan- Extra-safe backplate and screws mounting- Intel LGA775 and LGA115X compatible- Performance thermal interface pre-appliedSobilikProtsessorTüüpJahutiVentilaatori läbimõõt9,2 cmToetatud protsessoripesadLGA 775 (Socket T)Ühilduvad protsessoriseeriadCore 2 Duo,Core 2 Quad,Core i3,Core i5,Core i7,Pentium 4Pöörlemiskiirus (min)600 RPMPöörlemiskiirus (max)3000 RPMMüratase (aeglane kiirus)11,7 dBMüratase (suur kiirus)28,8 dBMaksimaalne õhuvool55,4 cfmMaksimaalne õhusurve4,3 mmH2OKeskmine tõrkeintervall (MTBF)40000 hToote värvMust, HõbeMaterjalAlumiiniumPinge12Nimivool0,26 ALaius95 mmSügavus95 mmKõrgus63 mmKaal344 g
Aqua Computer AirPlex Radical 2/420mm AluminumThe airplex radical series combines some key features from the renowned airplex modularity series in a new design, radically reduced to function and performance. The result is a radiator of excellent quality for a competitive price. Just as the airplex modularity series, no welding is performed during production of the airplex radical series, preventing any welding residues inside the radiator. The coolant does not have contact to any other materials than seals, Delrin, copper and stainless steel.For an improved and easier installation process, the airplex radical series comes with threaded inserts made from nickel plated brass that protrude into the mounting holes of the fans. Therefore, fans are "automatically" correctly aligned to the threads - extremely convenient especially with large radiators! Additionally, this results in a deeper thread and the screw can be positioned farther away from the tubes and fins of the radiator, reducing the risk to damage the radiator by using too long screws. If the radiator is to be installed without fans, the inserts can also be installed upside-down resulting in a nearly flat surface, so there is no gap between radiator and PC case.Both sides of the radiator are equipped with slide rails for the threaded inserts and inserts for one side of the radiator are included in delivery. Additional inserts are available separately. Small notches in the slide rails lock the inserts when installed.The radiator frame is made from stainless steel, the rear is chromated in dark gray for optical purposes. The total dimensions of the radiator are extremely compact in relation to the fin dimensions.Technical details:Dimensions: 460 x 140 x 40 mmConnection threads: G 1/4Threaded inserts: M3Connection terminal material: DelrinTube material: CopperFin material: AluminumFrame material: Stainless steel
EK-UNI Pump Bracket (140mm FAN) Vertical is a horizontal and vertical mounting adapter for pump and combo unit installation. It is compatible with EK-XTOP Revo D5, EK-XTOP Revo DDC, EK-XTOP SPC pumps and EK-XRES Revo D5, EK-Xres DDC, EK-XRES SPC combo units. The bracket mounts to any 140mm fan hole pattern. This product is compatible with the following EK products: EK-XRES Revo D5 series EK-XTOP Revo D5 series EK-XRES DDC series EK-XTOP DDC series EK-XRES SPC series EK-XTOP SPC series Scope of Delivery EK-UNI Pump Bracket (140mm Fan) Vertical 5x polyamide washer M4 5x screws M4x6 DIN7984 5x nut M4 Allen key 2,5
The new premium fan series is based on the NB-Blacksilent-Chassis and is equipped with the excellent electronics module NB-EKA Plus and NB-NanoSLI bearings. Both are features that were so far used only in the more complex Multiframe series. Besides the technologically advanced components this fan is also equipped with an individually adaptive cable management. The fan is shipped with a newly developed mounting kit for vibration-free mounting which consists of an optimized "NB-Silentframe" silicone frame with suitable counter-pieces and knurled nuts for tool-free installation. Technical specifications: Dimensions: 120x120x25mm Colour: Black Weight: 120g Nominal voltage: 12V Starting voltage: 4,5V Current draw: 0,06A Nominal speed: 900rpm (+/-10%) Airflow: 68m³/h / 40,025CFM Noise emission: 11 dB(A) MTBF (25°C): 180000hrs Connector: 3-Pin Molex plug with rpm lead Extent of delivery: 1x Noiseblocker NB-BlackSilentPRO PL1 ( 120x120x25mm ) 1x Fan decoupling 1x 3 PIN fan extension 20cm 1x 3 PIN fan extension 50cm 4x Mounting screws 4x Knurled nuts Tech-Review has tested this product for you!
The aqualis DDC 100 ml reservoir from aqua computer is designed for direct mounting to a Laing DDC pump not included in the delivery. For this purpose, the pump is attached only by means of a fastening ring and four screws in the base of the expansion tank. Separately available mounting rubbers can also be screwed into the base of the AGBs to allow mounting on the PC case. Alternatively, the pump and expansion tank can also be attached via the mounting tabs of the pump in the PC case. The container itself is made of high-grade borosilicate glass, which, in contrast to the acrylic glass often used for tube expansion tanks, has a very high hardness and scratch resistance, a very low thermal expansion and excellent chemical and thermal resistance. The glass tube of this 100 ml version has an outside diameter of 50 mm and a wall thickness of 5 mm. The base and lid, however, are made of Delrin, each have two G1 / 4-inch ports and are connected inside the tube by a stainless steel rod. This version is additionally provided with a nano-coating, which allows water to simply roll off the inside of the glass tube. This creates a cool visual effect that enhances the entire reservoir. Note: Pump, connectors and decoupling rubbers are not included, please purchase separately. Technical details: Dimensions without pump: 62 x 62 x 132 mm (W x H x D)Dimensions with pump (not included): 88 x 62 x 147 mm (W x H x D)Diameter tube: 50 mmWall thickness: 5 mmMaterial: borosilicate glass (container), Delrin (base & lid), stainless steel (screws & connecting rod)Füllvolumen: 100 mlConnection thread: G1 / 4 inchesScope of delivery: 1x equalizing tank 2x screw plug G1 / 4 (pre-assembled) Four screws for fixing the pump
The reservoirs aquainlet PRO and aquainlet XT are designed to be directly mounted onto an aquastream XT or Eheim 1046 pump. The design is perfectly matched to the pump, after installation pump and reservoir form a virtually seamless unit. In particular, the mounting rails of the pump are extended into the reservoir, which for the first time allows for the mounting plate to be installed beneath the center of gravity. This is especially helpful when using rubber decouplers or a shoggy sandwich. When installed onto the suction port of the pump, an o-ring seals the connection between pump and reservoir and two latches secure the reservoir to the pump housing, preventing accidental release of the bayonet coupling between pump cover and pump housing. Two connection threads for the return line located at the front and the side of the unit allow for flexible installation options and are paticularly useful if the reservoir is to be installed with limited space.The reservoirs aquainlet PRO and aquainlet XT are closely related to the aqualis series and are also equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and top of the aquainlet reservoirs are made from Delrin and connected by a stainless steel rod. The aquainlet XT variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors.All variants are also available with a nano coating that will cause water to roll off the inner surface of the borosilicate glass tube.Technical details:Dimensions without pump: approx. 56 x 67 x 198 mmFilling volume: approx. 150 mlConnection threads: G1/4Compatible to the following pumps:- aquastream XT- Eheim 1046 and pumps identical in constructionScope of delivery:One ReservoirThree sealing screws G1/4 (preinstalled)Please note: Fittings and pump are not included in delivery, please order seperately.>
The aqualis DDC 100 ml reservoir from aqua computer is designed for direct mounting to a Laing DDC pump not included in the delivery. For this purpose, the pump is attached only by means of a fastening ring and four screws in the base of the expansion tank. Separately available mounting rubbers can also be screwed into the base of the AGBs to allow mounting on the PC case. Alternatively, the pump and expansion tank can also be attached via the mounting tabs of the pump in the PC case. The container itself is made of high-grade borosilicate glass, which, in contrast to the acrylic glass often used for tube expansion tanks, has a very high hardness and scratch resistance, a very low thermal expansion and excellent chemical and thermal resistance. The glass tube of this 100 ml version has an outside diameter of 50 mm and a wall thickness of 5 mm. The base and lid, however, are made of Delrin, each have two G1 / 4-inch ports and are connected inside the tube by a stainless steel rod. Note: Pump, connectors and decoupling rubbers are not included, please purchase separately. Technical details: Dimensions without pump: 62 x 62 x 132 mm (W x H x D)Dimensions with pump (not included): 88 x 62 x 147 mm (W x H x D)Diameter tube: 50 mmWall thickness: 5 mmMaterial: borosilicate glass (container), Delrin (base & lid), stainless steel (screws & connecting rod)Filling volume: 100 mlConnection thread: G1 / 4 inchesScope of delivery: 1x equalizing tank 2x screw plug G1 / 4 (pre-assembled) Four screws for fixing the pump
Stylische Sleeves von CableMod, für Hydro-AiOs von Corsair & EVGA & NZXT, Textil-Sleeving aus ModMesh-Material, einfache Installation in wenigen Minuten
Material: EPDM Color: Black, not UV-reactive Inner diameter: 9,5 mm (3/8") Outer diameter: 15,9 mm (5/8") Operating temperature range: -30 °C to 110 °C Compatible with all known widely used coolants Retail packaging: 3m per box (~10ft) Conforms with: RoHS.
Toote kirjeldus inglise keeles:To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a matte black G1 / 4 inch screw for 16 / 10mm hoses, but can also be used for 16 / 11mm. The connection has an angle of 45 degrees and is double turnable. This greatly facilitates installation and allows for precise alignment. Note: The turning function of the connections should always be used in the disassembled state, as this is relatively stiff due to the design. When installed, do not apply force to connections to avoid damaging the connectors themselves and the radiators on them. Technical details:Material: brassColor: matt blackConnections: Thread: G1 / 4 inch Hose: 16/10 mm
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a carbon black nickel plated, straight adapter with two 1/4 inch external threads. In addition, the connection is rotatable, which significantly simplifies the screwing. Note: The turning function of the connections should always be used in the disassembled state, as this is relatively stiff due to the design. When installed, do not apply force to connections to avoid damaging the connectors themselves and the radiators on them. Technical details:Material: brass, carbon black nickel platedConnections: male thread: 2x 1/4 inch
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This 45 degree angled G1 / 4 "fitting for hoses with 13mm inner diameter does not use a union nut, which is why any tube thickness and thus outer diameter can be used. The blood red connection can be turned on the side of the screw thread. This greatly facilitates installation and allows for precise alignment. Note: For a better and safer fit, we recommend using a cable tie or a hose clamp. Furthermore, the rotation function of the connections should always be used in the disassembled state, as this is relatively difficult to move due to the design. When installed, do not apply force to connections to avoid damaging the connectors themselves and the radiators on them. Technical details:Material: brassColor whiteConnections: Thread: G1 / 4 inch hose: 13 mm (inside diameter)
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a blood red finish for 1/2 "or 13mm inner diameter tubing. This can be closed temporarily or permanently unneeded hose ends. Since a plug-in connection was installed, any tube thickness or outside diameter can be used. The end itself forms a screwed closure, which is screwed into a G1 / 4 inch thread and isolated by a sealing ring. If necessary, the thread can also be used to tie other components, which requires a normal external thread with G1 / 4 inches. Note: For a better and secure fit of the hose, we recommend the use of a cable tie or hose clamp. Technical details:Material: brassColor: blood redConnections: Plug connection: 13 mm
Processor brand name: Intel Producer product name: SST-NT08-115X-V2 Material: Copper center, Extruded aluminum fins Supported processor sockets: Intel LGA1150/1151/1155/1156 Fan dimensions (W x D x H): 92 x 92 x 25 mm Air pressure: 0.65 ~ 4.46mmH2O Noise level: 16.9 ~ 39.8 dB Bearing technology: Dual ball bearing Airflow: 18.59 ~ 56.96CFM Fan speed (min): 1200 RPM Fan speed (max): 3500 RPM Type: CPU Air Cooler Gross depth (mm): 100.00 mm Gross height (mm): 100.00 mm Gross weight: 0.40 kg Gross width (mm): 80.00 mm Net weight: 0.30 kg Packing quantity: 1.00 pc(s) Plastic (No PET): 16.00 g Tare weight (kg): 0.10 kg Volume (m3): 0.00 m³ WEEE tax: No
All reservoirs of the aqualis series are equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube of the 450 ml and 880 ml variants has an outer diameter of 75 mm and a wall thickness of 5 mm. Base and top of the aqualis reservoirs are made from Delrin and connected by a stainless steel tube. As a optical highlight, a fountain effect can be realized. If the return line is connected to the center connector of the reservoir, the water flows through the stainless steel tube to the top of the reservoir, where it is ejected through eight nozzles. In combination with illumination, this is a real eye catcher effect. A thin acrylic plate near to the bottom of the reservoir reduces air ingestion to a minimum. Alternatively, the return line can be connected to a lateral connector of the reservoir, the water then exits directly from the base part. For this configuration, a deflector plate is included in delivery to ensure can be installed to effectively remove air from the water circuit. The aqualis PRO 450/880 ml variants additionally feature an acrylic window in the base part and up to six LEDs (5 mm size) can be installed into the base part. The PRO variants can be upgraded with an electronic fill level sensor at a later date. The aqualis XT 450/880 ml variants feature the same acrylic window and LED mounting as the PRO variants. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors. All variants are also available with nano coating that will cause water to roll off the inner surface of the borosilicate glass tube. Technical details: Dimensions without stainless steel bracket: approx. 80 x 80 x 290 mm Filling volume: approx. 880 ml Connection threads: G1/4 Scope of delivery: One Reservoir One stainless steel bracket One stainless steel deflector plate Two sealing screws G1/4 (preinstalled) Monting material Please note: Fittings are not included in delivery, please order seperately.
The airplex radical series combines some key features from the renowned airplex modularity series in a new design, radically reduced to function and performance. The result is a radiator of excellent quality for a competitive price. Just as the airplex modularity series, no welding is performed during production of the airplex radical series, preventing any welding residues inside the radiator. The coolant does not have contact to any other materials than seals, Delrin, copper and stainless steel.For an improved and easier installation process, the airplex radical series comes with threaded inserts made from nickel plated brass that protrude into the mounting holes of the fans. Therefore, fans are "automatically" correctly aligned to the threads - extremely convenient especially with large radiators! Additionally, this results in a deeper thread and the screw can be positioned farther away from the tubes and fins of the radiator, reducing the risk to damage the radiator by using too long screws. If the radiator is to be installed without fans, the inserts can also be installed upside-down resulting in a nearly flat surface, so there is no gap between radiator and PC case.Both sides of the radiator are equipped with slide rails for the threaded inserts and inserts for one side of the radiator are included in delivery. Additional inserts are available separately. Small notches in the slide rails lock the inserts when installed.The radiator frame is made from stainless steel, the rear is chromated in dark gray for optical purposes. The total dimensions of the radiator are extremely compact in relation to the fin dimensions.Technical details:Dimensions: 160 x 140 x 40 mmConnection threads: G 1/4Threaded inserts: M3Connection terminal material: DelrinTube material: CopperFin material: AluminumFrame material: Stainless steelScope of delivery:One radiator4 threaded inserts M34 screws M3 x 25
Hochwertiges Reservoir aus stabilem Nylon von Alphacool, mit Montageplatz für DDC-Pumpe, 250 ml Füllvolumen und flexible Montage, Vorbereitung für LEDs und beleuchtetes Logo, insgesamt vier Port-Öffnungen
