The adapter from Bitspower in white has a G1/4 inch internal thread and a G1/4 inch external thread. Technical Data: Material: Brass Main Color: White Thread: 1x G1/4", 1x Inner G1/4" Thread Length: 5 mm
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a carbon black nickel plated, straight adapter with two 1/4 inch external threads. In addition, the connection is rotatable, which significantly simplifies the screwing. Note: The turning function of the connections should always be used in the disassembled state, as this is relatively stiff due to the design. When installed, do not apply force to connections to avoid damaging the connectors themselves and the radiators on them. Technical details:Material: brass, carbon black nickel platedConnections: male thread: 2x 1/4 inch
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This 45 degree angled G1 / 4 "fitting for hoses with 13mm inner diameter does not use a union nut, which is why any tube thickness and thus outer diameter can be used. The blood red connection can be turned on the side of the screw thread. This greatly facilitates installation and allows for precise alignment. Note: For a better and safer fit, we recommend using a cable tie or a hose clamp. Furthermore, the rotation function of the connections should always be used in the disassembled state, as this is relatively difficult to move due to the design. When installed, do not apply force to connections to avoid damaging the connectors themselves and the radiators on them. Technical details:Material: brassColor whiteConnections: Thread: G1 / 4 inch hose: 13 mm (inside diameter)
The nickel-plated adapter in matt black couples two tubes, which do not run on a common straight line, and ensures a bend of 30 degrees at the adapter. Two rubber rings seal both sides. The adapter is especially well compatible with the Crystal Link Tubes from Bitspower. Technical Data: Material: Nickel-Plated Brass Colour: Matt Black Angle: 30 ° Connections: 2x Ø 12 mm
If you want to have the pump with the highest possible throughput for your water cooling system, you should use the Laing D5. But it's not perfect in one respect: the non-standard connections. Like other manufacturers, Bitspower also offers alternative D5 covers. The completely transparent cover, milled from one block of acrylic, has three G1/4" threaded holes and holes for LEDs. The transparent look makes LEDs and coloured coolants particularly effective. Included in delivery are the necessary screws and a sealing ring. Technical Data: Dimensions: 71 x 71 x 32 mm (W x H x D) Material: Acryl Color: Black, Transparent Thread: 3x G1/4" LED Holes: 2x 5 mm, 2x 3 mm Compatibility: Laing D5, Swiftech MCP 655
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a blood red finish for 1/2 "or 13mm inner diameter tubing. This can be closed temporarily or permanently unneeded hose ends. Since a plug-in connection was installed, any tube thickness or outside diameter can be used. The end itself forms a screwed closure, which is screwed into a G1 / 4 inch thread and isolated by a sealing ring. If necessary, the thread can also be used to tie other components, which requires a normal external thread with G1 / 4 inches. Note: For a better and secure fit of the hose, we recommend the use of a cable tie or hose clamp. Technical details:Material: brassColor: blood redConnections: Plug connection: 13 mm
Kotetsu Mark II TUF Gaming Alliance In cooperation with Asus Scythe presents the TUF Gaming Alliance version of the Kotetsu Mark II CPU Cooler. Design elements, such as a topplate with the TUF logo and the familiar pattern, as well as a 120mm RGB LED Kaze Flex fan with matching yellow decouplers connect the cooler optically with the rest of the TUF Gaming Alliance components. Four nickel-plated heatpipes complete the overall picture and convey an attractive and high-quality appearance. The heat sink features compact dimensions and is designed for maximum compatibility. An overall height of only 154 mm, the asymmetrical design of the heat sink for maximum memory and graphics card compatibility as well as an optimised and user-friendly mounting system form a convincing overall concept for installation in almost any standard housing. H.P.M.S. III (Hyper Precision Mounting System III) The Kotetsu Mark II uses a revised version of the secure and user-friendly Hyper Precision Mounting System. A pre-assembled mount bar makes installation much easier, while spring-loaded screws provide balanced contact pressure. Combined with the redesigned backplate and rubber/plastic spacers, the system offers an easy and convenient installation process and compatibility with all current sockets including AMD®'s AM4 and Intel®'s LGA 2066 platforms. Kaze Flex 120 RGB PWM Fan The Kotestu Mark II TUF uses a PWM fan from the award-winning Kaze Flex series to guarantee smooth running and an average service life of 120,000 hours. The self-contained Sealed Precision FDB reduces friction and wear to a minimum thanks to a special oil film. Rubberized bearing surfaces have a decoupling effect and prevent the transmission of vibrations to the heat sink. Eight RGB LEDs arranged in a ring around the fan motor illuminate the translucent fan blades. Asymmetrical design and low overall height To ensure maximum compatibility, the Kotetsu Mark II TUF heat sink is not centered directly above the base plate, but slightly offset to the rear and side. This asymmetrical design allows unrestricted use of the complete memory banks and leaves enough space for large-format GPU coolers. With its compact height of only 154 mm, the Kotetsu Mark II fits easily into all standard PC cases. Technical details: Model name: Kotetsu Mark II TUF Gaming Alliance CPU Cooler Model number: SCKTT-2000TUF Compatibility Intel®: Socket LGA775 Socket LGA1150 Socket LGA1151 Socket LGA1155 Socket LGA1156 Socket LGA1366 Socket LGA2066 Socket LGA2011 / 2011-v3 (Square ILM) AMD®: Socket AM2 Socket AM2+ Socket AM3 Socket AM3+ Socket AM4 Socket FM1 Socket FM2 Socket FM2+ Please note that for mounting on motherboards with AMD® sockets, a screwed original backplate of the motherboard is required. Please check before purchase if this is screwed! If this is fastened with plastic pins, a mounting of this cooler is not possible. Overall dimensions: 136 x 154 x 85 mm with fan (additional dimensions) Weight: 645 g (with fan) Accessories: Mounting material for Intel & AMD sockets, 120mm RGB LED fan, thermal paste, fan terminals, installation instructions. Material of the base plate: nickel-plated copper base 38 x 38 mm (more info) Fan Specifications Model name: Kaze Flex 120 RGB PWM Fan dimensions:120 x 120 x 27 mm Noise level: 4.0 ~ 24.9 dBA Air flow rate: 16.6 ~ 51.17 CFM Fan speed: 300 upm (±200) ~ 1200 upm (±10%) Voltage / current:DC 12V / 0,13A Static pressure:0.75 ~ 10.3 Pa / 0.076 ~ 1.5 mmH²O Storage type:Sealed Precision FDB
Mini-Pumpe für Silent-Wasserkühlsysteme, 72 L/h Durchfluss und 1 m Förderhöhe, Betrieb zwischen 7 und 13,5 Volt bei nur 3,2 Watt Leistungsaufnahme, Ohne Aufsatz/Pumpen-Top
The Arctic thermal pads are ideal for efficiently exchanging heat between different components. Thanks to the high quality of workmanship and excellent thermal conductivity, the pads are used in many places on computers and electronic components. The thermal pad, which is based on silicone and a special filler, far outperforms generic and performance-oriented pads. In a test by PC Games Hardware (11/2018), the "excellent processability and reusability in every respect" was praised. In combination with the fair price and good performance, our thermal pad was recommended as a "price-performance tip". Thanks to its low hardness and good compression properties, the thermal pad acts as a perfect gap filler and easily bridges uneven surfaces and air gaps. The ARCTIC Thermal Pads are non-adhesive and can therefore be placed precisely. Installation is child's play and therefore perfect for beginners. The pad contains no metal particles, is electrically insulating and not capacitive. Handling is therefore safe since contact with electrical parts does not lead to damage. Technical specifications: Dimensions 120 x 20mm Contents: 2 pieces Thickness 0.5 mm Thermal conductivity 6.0 W / mK Hardness 25 shore 00 Relative density 3.2 g / cm³ colour blue Operating temperature -40 ~ 200 ℃ Volume resistance 1 X 1012 Ω-cm Interruption voltage 12 KV / mm Draw resistance 2.5 Kgf / cm² Elongation 45% Dielectric constant 14.1816 ε at 60 Hz 13.0264 ε at 1K Hz 13.0264 ε at 1M Hz Flammability V-0
Hyper H410R RGB | LGA1150/LGA1151/LGA1155/LGA1156/LGA1366/LGA2011/LGA2066/SAM2/SAM2+/SAM3/SAM3+/SAM4/SFM1/SFM2/SFM2+ | Fan speed 600-2,000 RPM | Air flow 34.1 cfm | Noise level, max 29 dB | Dimensions 102 x 83.4 x 136 mm | Weight 0.54 kg
Hochleistungs-Kühler mit transparentem Nylon- und Acryldeckel für Intel & AMD, große Kontaktfläche ideal für Mehrkern-CPUs, integrierte digital adressierbare RGB-LED-Beleuchtung
The adapter for 16mm (AD) Hard Tubes in matt black from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Matt Black Connection: 16 mm (OD) Thread: G1/4" Thread Length: 5 mm
The new Alphacool Eisblock XPX Aurora Edge CPU water cooler offers fantastic performance thanks to the patented ramp design as well as boasting excellent quality. The new Aurora design in combination with the addressable digital RGB illumination offers many possibilities for outstanding illumination of the CPU water block. Performance in abundance! Alphacool already developed and patented new flow technology for the first Alphacool Eisblock XPX series. The so-called "ramp system" ensures an even flow of water inside the cooler and sits in front of the diffuser plate. This ensures that the water is pressed evenly through the diffuser plate, which in turn pushes the water evenly over the cooling base. The cooling channels on the CPU cooler base has also been enlarged to a proud 34 x 32 mm to accommodate the ever-growing CPU DIEs. This is especially true for multi-core processors with 4, 6, 8 or even 12 and more CPU cores. So that the heat from the CPU can be transferred to the water as quickly as possible. 81 cooling fins can be found on the cooling plate to ensure maximum heat diffusion. The fin structure has been reduced to just 0.2 mm in order to create the largest possible surface area in the smallest possible space. And the lighting? All new Eisblock XPX Aurora Edge CPU waterblocks come with addressable digital RGB lighting. The aRGB LEDs are integrated directly into the CPU water cooler and run once around the entire cooling block. With up to 15 digital RGB LEDs the entire CPU block is evenly and intensively lit. Of course, the brightness can be controlled by an appropriate controller. And as with all aRGB LED products all known effects can be created. From simple colour changes to wave effects and rainbow lighting, everything is possible. Of course, the Alphacool Eisblock Aurora coolers can also be connected and controlled via mainboards using the standard 3-pin 5V connector. The cable also has an integrated Y-adapter. This makes it easy to connect further Alphacool Aurora products in series without having to order separate Y-adapters. Extension cables may be needed if you want to connect the products in series, depending on the size of the case. Is installation difficult? Mounting the XPX Aurora Edge Eisblock cooler is simple. The backplate is simply attached to the mainboard from behind. The mounting frame for the AMD or Intel socket is clamped to the cooler and the corresponding mounting screws are pre-attached to this frame. Next, you simply apply thermal paste and you attach the cooler using the screws. Please note: Remove the protective foil on the cooler base before use! Unique Aurora Design The Alphacool Eisblock Aurora Edge has been significantly changed in some points to its predecessor, the Eisblock XPX. The lower part of the cooler is completely made of brass and no longer of plexiglass or transparent nylon. This changes the overall feel and quality of the cooler. Not only is it heavier in the hand, but it is also much more stable than the usual Plexi CPU water coolers. In order to stand out visually from the normal Eisblock XPX Aurora CPU water cooler, the bottom of the cooler was kept completely in black. This emphasizes the visual effect of the water flow. The corners of the CPU cooler are more angular, which makes the cooler stand out from the normal Aurora Plexi Eisblock. Technical details Dimensions (WxTxH): 70 x 70 x 32,5 mm Net weight: 407 g Max working temperature: 60 °C Material cooler: nickel plated copper Material bottom part: brass Material top: Plexi Threads: 2 x G1/4“ Power supply Digital RGB: 3-Pin 5V Pressure tested: 1,5 Bar Certificates: CE, FC, ROHS Download manual PDF: Alphacool Eisblock XPX Aurora Edge - Plexi Chrome Digital RGB Download data sheet PDF: Alphacool Eisblock XPX Aurora Edge - Plexi Chrome Digital RGB
RGBpx LED ring for aqualis 100/150, 10 addressable LEDsThe RGBpx-compatible LED ring for aqualis 100 and aqualis 150 expansion tanks with a total of 10 individually addressable LEDs. The LEDs are mounted in a black rubber ring which is slid onto the glass tubes of the aqualis 100 and aqualis 150 expansion tank series.To operate the LED strip, an appropriate control unit with RGBpx output is required (not included in delivery). At the end of the strip there is an additional connector to connect another RGBpx component.Technical data: Inner diameter 50 mm Dimensions approx. 60 x 62 x 10 mm 10 individually controllable LEDs Scope of delivery: RGBpx LED ring one RGBpx connection cable, length 50 cm Compatible to: D5 NEXT QUADRO fan controller
Now finally also with us the Black ICE Nemesis radiators. The Black Ice® Nemesis® GTS radiators are the next generation of computer radiators from Hardware Labs. These radiators offer an improved cooling performance when using
Now finally also with us the Black ICE Nemesis radiators. The Black Ice® Nemesis® GTS radiators are the next generation of computer radiators from Hardware Labs. These radiators offer an improved cooling performance when using
Hochwertiges Reservoir aus Acryl, 200 ml Füllvolumen & flexible Montage, Vorbereitung für DDC-Pumpe & 4 Anschlüsse für 1/4-Zoll-Fittings, Bracket zur Installation auf 120- und 140-mm-Lüftern, digital adressierbare RGB-Beleuchtung
Technical Data: Material: Nickel-Plated Brass Colour: Black Supported Tube: 16/12 mm Thread: G1/4", male Thread Length: 4,5 mm Outer Diameter (Fitting): 23 mm Installed Height: 19 mm Compatible Soft Tubing: PVC, EPDM, Norprene, Silicone and most other flexible tubes
The construction of a quiet computer is always a challenge, especially if performance and proper cooling are also a factor. The SF01 consists of two foam plastic sheets which help with noise absorption with minimal pressure inside of the system. Each sheet has a large surface and is made from very dense foam plastic with a thickness of 4mm. This ensures good noise reduction and flexible integration. Special features: Special high-grade EPOM foam plastic material for noise absorption Excellent adhesive properties even at high temperatures Simply cut to size: Fits in any computer case Contains two foam sheets Technical specifications: Colour: Black Material: EPOM Dimensions (WxLxD): 530x380x4mm Extent of delivery: 1x Silverstone noise absorption sheet (SST-SF01)
Toote kirjeldus inglise keeles:The Wing Boost 3 RGB combines many of the benefits of its famous predecessors with a circular, digitally addressable RGB LED lighting in the outer frame. The eponymous "Wing Boosts", small increases on the impeller intake side, reduce air turbulence. The fan therefore works quieter at higher speeds than conventional fan designs would allow.The features of the Alpenföhn Wing Boost 3 ARGB fan at a glance:- 120 millimeter fan with digitally addressable RGB illumination- Hydrodynamic bearing for high performance, quiet operation and long life- Optimized rotor blades deliver the perfect balance between contact pressure and airflow- Speed range from 700 to 1,600 rpm- 4-pin PWM connector- Compatible with ASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion and ASRock PolychromeWing Boost 3 ARGB: Powerful 120mm fanThe Wing Boost 3 ARGB is a 120mm PWM-controlled fan that is equally well-suited for mounting on enclosures, processor coolers, and radiators. The fan operates in a speed range between 700 and 1,600 rpm, achieving a delivery volume of 92.6 m³ / h and a static pressure of 2.19 mm H2O.The hydraulic bearing, which reduces friction noise to a minimum, and the rubber decouplers in the fan frame ensure whisper-quiet operation, even at low revs. Under full load, the Wing Boost 3 RGB produces a maximum noise level of 23.5 decibels.Addressable RGB LED lighting in the frameThe Alpenföhn Wing Boost 3 ARGB is equipped with digitally addressable RGB LED lighting. The manufacturer has integrated two 16.8 million colored rings into the fan frame, which casts a light glow on the impeller and can be connected to the motherboard or corresponding controllers via a 3-pin RGB connector. The Wing Boost 3 ARGB is compatible with ASUS Aura, Gigabyte RGB Fusion, ASRock Polychrome RGB and MSI Mystic Light.Technical details:- Dimensions: 120 x 120 x 25 mm (W x H x D)- Material: plastic, rubber- Color: white (frame, rotor), gray (decoupler)- Volume: max. 23.5 dB (A)- Speed: 700 - 1,600 rpm- Delivery volume: max. 92.6 m³ / h- Static pressure: 2.19 mm H2O- Voltage: 12VConnection:- 4-pin PWM- 3-pin RGB (5VDG)- Lighting: RGB (16.8 million colors)Delivery:- 1x Alpenföhn Wing Boost 3 RGB- 4x screws for housing- 4x screws for radiator
Toote kirjeldus inglise keeles:The Alphacool Cape Coolplex reservoirs have been well-known and popular on the water cooling market for years!But even such great products can sometimes use an update to fulfill even the most recent demands. Hence we at Alphacool have let the old series run out and now introduce the new series with POM end pieces as “LT” and now even with solid metal end pieces as the “Copper Edition”. Of course the tubes are made from high-grade Plexiglas which has proven itself with safe operation in many cooling systems for many years!The changes made are subtle but very well thought through:Besides the new materials and surface finishes the top piece of the reservoirs is now equipped with an additional thread, making them great for installation of a Fillport. Additionally the reservoir can now also be installed horizontally! The riser tube is now removable for applications where the top of the reservoir is used as an inlet.A nice side effect: Now even more lighting modules can be installed for beautiful lighting effects.To round off the new concept the screw plugs on all versions now have an elegant polished copper surface finish!For maximum compatibility all threads are G1/4” in size. The proven transparent mounts are now also included again for almost invisible mounting. Make your PC a piece of art with the new Cape Coolplex reservoirs!Technical specifications:- Material: POM, Plexi- Height: 100mm- Diameter: 50mmReviews:- Connection threads: G1/4"- Weight: 264gExtent of delivery:- Reservoir- 2x Mounting clamps- 2 x G1/4" Screw plugsPlease note: For mounting additional screws are needed. We recommend ordering item No. 15705 with this reservoir.Weight & dimensionsWidth 50 mmDepth 50 mmHeight 100 mmDesignMaterial Polyoxymethylene (POM)Colour of product Black, Transparent
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®.(Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316, Dremel® - Art.No: 32196 and 32229) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 90° 10/30cm WARNING:Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note:Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention:This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: L-ConnectorThis 90° angle adapter has a ¼” internal screw thread on both sides. Its compact shape makes it perfect for hard-to-reach spaces. Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Length: 25mm Width: 25mm Height: 18mm Scope of Delivery: 1x Alphacool Eiszapfen L-connector G1/4 inner thread to G1/4 inner thread - deep black
