Bitspower's stylish matt black ball valve stops the cooling circuit and is ideal for systems where regular conversions are required. At both ends the ball valve has two G1/4" female threads, for two suitable connections. The material is nickel-plated brass. Technical Data: Material: Nickel-Plated Brass Main Color: Matt Black Handle Color: Black Thread: Inner G1/4" x2
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a carbon black nickel plated, straight adapter with two 1/4 inch external threads. In addition, the connection is rotatable, which significantly simplifies the screwing. Note: The turning function of the connections should always be used in the disassembled state, as this is relatively stiff due to the design. When installed, do not apply force to connections to avoid damaging the connectors themselves and the radiators on them. Technical details:Material: brass, carbon black nickel platedConnections: male thread: 2x 1/4 inch
The Alphacool “Eiszeit” is a compressor cooler with a maximum cooling power of 1500W. Unlike most so-called Chillers or circulating coolers, the Eiszeit has a high-performance integrated pump. Highlights Integrated pump with 10m head and 600L per hour. Cooling power of 1500W Cooling can be regulated in 0.3 Kelvin increments. Large reservoir with 9L capacity All connectors fit standard G1/4” threads With the “Eiszeit”, you get a compressor cooler designed by Alphacool. With it, you can keep your system – or more than one system – at a temperature you pre-set, automatically regulated for you. The Eiszeit has a maximum cooling power of 1500W. Entering your settings is easily done through the Eiszeit’s display, and you can set the temperature in precise increments of 0.3° Kelvin. If necessary, you can reach temperatures far below room temperature. Another highlight is the integrated high-performance pump with a maximum head of 10m. This means a separate pump is no longer necessary. If the pump performance proves to be too strong, a restrictor can be integrated into the cooling loop via a ball valve or check valve. The G1/4” connectors can fit nearly all standard water cooling attachments. This gives the Eiszeit outstanding compatibility compared to other current products like CPU coolers and graphics card coolers. The Eiszeit also has security functions, such as surge protection for the compressor and an alarm indicating the flow rate is too low or the temperature is too high. Using the Eiszeit is relatively simple. After connecting it to the cooling loop, the loop needs to be filled via the fill port on top of the Eiszeit. The integrated reservoir holds 9L; additionally, you will need enough coolant to fill the complete loop. ATTENTION The temperature can NOT be set below 20 ° C. Technical Details Voltage: 230V Frequency: 50Hz Current: 2.4~3.3A Power consumption: 660W Compressor power: 0.49/0.57KW (0.66/0.77HP) Refrigeration capacity: 1.41/1.70KW Refrigerant: R-134a Refrigerant charge: 380g Precision: ±0.3℃ Reducer: Capillary Protection: Surge protection for compressor, flow alarm, high temperature alarm Pump power: 0.03KW Tank capacity: 9L Inlet and outlet: G1/4 Inner threads connector Max. Lift: 10 meters Max. Flow: 10 L/min Net weight: 29Kgs Noise level: 65 db(A) Dimensions (LxWxH): 560 x 280 x 470mm Materials Reservoir: Polypropylene Tube soft: Silicone Tube hard: PU Scope of Delivery Alphacool Eiszeit 2000 Chiller - black Manual in multiple language Alarm output connector UK power plug Download manual: manual Download data sheet: data sheet NOTICE Because all of the Eiszeit’s functions are tested after manufacturing, some coolant does remain in the system when it is shipped. This is NOT grounds for a return and does not indicate that this item is B-stock or an exchanged item. Notice regarding shipping This item can only be shipped through a freight forwarding service. Since shipping costs will vary by distance, online price calculation is not possible at this time. Please give your full telephone number and email address when placing your order. We will contact you after your order is placed. Shipping costs can add up to ca. 25€ within Germany. Freight forwarding costs will be specified during the ordering process. In case of returns This item can only be sent via a freight forwarding service! Should you need to return the item, please make use of a forwarding agency! Items returned to us via parcel service will not be accepted, as shipping them through a parcel delivery service will damage the device!
Tootekood: FD-FAN-PRI-AL12-PWMGTIN: 7340172701590Jahutid ja lisad
Dimensions 120x120x25mm, Turns 500-2000rpm, Air flow rate 35.1-145.62m³ / h, Air pressure 0.36-2.78mmH₂O, Volume 14.8-32.7dB (A), Fan bearing LLS, Connection 4-pin PWM, Voltage range 7-12V, Power consumption 2.16W, Special features RGB illuminated, RGB header (3-pin + 5V / DATA / GND, FD-FAN-PRI-AL12-PWM
Fins are slightly indented. Minimal scratches. Technical specifications, see product slightly: 35266 Special notes regarding B stock Used Goods: Here we offer goods which have, for example, been returned to us by customers but show signs of having been used. This mostly includes things like fingerprints on the copper, bits of thermal paste or marks on the chips / scratches. Although the products have signs of use, they are technically sound. There is a 12-month warranty on used products. Defective Goods: Here we offer goods which have, for example, been manually damaged by customers, or were noticed in our own quality control checks. These products are defective and generally cannot be used without repairs. Aquatuning is not responsible for either damages which occur on the products or for damages caused through use of these products. Use at your own risk! There is no return or recall policy with defective goods. Returns of used/defective goods: We attempt to name all relevant “flaws”, without guaranteeing completeness. Aquatuning has no obligation to remedy any discrepancies or missing accessories/packaging, etc. The only valid reason for a return is if the wrong product is sent (packing error). Notice: Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days. We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool. Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
Low-Noise-Pumpe von Alphacool und Laing, Schwarzes Messing-Gehäuse (Black Nickel), möglich, 200 l/h und 2,44 m Förderhöhe bei 10 Watt Leistungsaufnahme, Single Edition ohne Aufsatz
The Arctic Freezer 50 TR is an extremely powerful cooler for the AMD Ryzen Threadripper CPU’s thanks to its dual tower and two P-series fans in push-pull configuration. It is the first cooler from Arctic with fully addressable RGB's and thus offers completely customizable lighting for your PC. The dual tower design is asymmetrical and offers more cooling surface. The eight U-shaped curved direct-touch heat pipes remove the heat better and faster. Two P fans in push-pull configuration are installed in the Freezer 50 TR. The combination of 120 and 140mm fans achieves a high air throughput for better cooling performance, and all of this at low volume. 13 A-RGB LEDs are built into the Freezer 50 TR, which can be controlled independently of each other. The connection is compatible with common motherboard manufacturers and can therefore be controlled directly. The lighting of the Freezer 50 TR can thus be controlled directly via the A-RGB mainboard connection or via the external controller. Technical specifications Compatibility AMD socket: SP3, sTR4 Ram free space (maximum module height): 37.5mm Heat sink Direct touch heat pipes Ø 6 mm x 8 Aluminum fins 2 x 52, thickness: 0.4 mm Thermal compound: MX-4 Fan Fan: 1x 120 mm, 1x 140mm 200 - 1,800 rpm (PWM controlled) Bearings: Fluid Dynamic Noise level: 0.4 sone (@ 1,800 rpm) Current / voltage: 120mm 0.09 A / 12 V DC / 140mm 0.13 A / 12 V DC Height Weight Depth: 147.8 mm Width: 149.5 mm Height: 165 mm Weight 1700g
With the two matt black holders from Bitspower it is possible to install the complete series of D5 pump, D5 top and Z tube reservoir in the case. The mounting kit is compatible with the D5-Top and the 2D5-Top and can therefore be used as an extension or replacement. Technical Data: Colour: Matt Black Compatibility: D5-TOP, 2D5-TOP
EK-Quantum Kinetic TBE D5 combo unit is the revolution of the most popular pump-reservoir assembly design on the market. The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine D5 pump! The reservoir is equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops. The top features three G1/4" ports, one of which has a pre-installed nickel-plated brass internal tube which helps to prevent the splashing of the coolant inside the reservoir if the top is to be used as an inlet. This reduces the chances of air being sucked in by the pump and foaming of the coolant as well. Any of these ports can also use used for filling the system or adding additional accessories (thermal probes, LEDs, etc.) Another three industry-standard G1/4" ports are available in the bottom combo housing. The upgrade compared to the previous combo unit is the 3rd available side port usable as either an optional inlet or a drain port. A special rubber shock absorber is used to de-couple the main pump body from the mounting clip for silent operation, free of vibration-induced noise. Additionally, horizontal and vertical positioning is supported for easier tube routing possibilities. The 60mm diameter tube is made of high-quality acrylic material, while the reservoir bottom/pump top is CNC machined black POM acetal. The sealing is performed by a quality EPDM o-ring. The integrated addressable D-RGB is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB header. This reservoir can be easily upgraded with longer acrylic tubes used by EK-RES X3 series reservoirs. Pump electrical and mechanical properties: - Motor: Electronically commuted spherical motor - Rated voltage: 12V DC - Power consumption: 23W - Maximum pressure head: 3.9m - Maximum flow: 1500L/h - Maximum system temperature: 60°C - Materials: Stainless steel, PPS-GF40, EPDM O-rings, hard coal - Power connector: 4-Pin Molex- and 4-Pin PWM FAN connector Technical specifications: - Reservoir diameter 60mm - Reservoir free volume: 205mL - Overall unit height: 200mm - Mounting hole pattern: 65x34mm - D-RGB connector standard 3-pin (5+, Digital, Blocked, Ground) Operational regime: - PWM duty cycle: ~ 20-100% - Default behavior: Runs at 100% duty cycle when no PWM feedback signal is present Enclosed: - EK-Quantum Kinetic TBE 200 D5 PWM D-RGB - Mounting clip with rubber insert - Self-adhesive mounting hole pattern sticker - Mounting mechanism (incl. required Allen keys) - Installation manual Made in Slovenia - EU! Pump motor made in Hungary - EU!
During the development of the new P14 PWM PST special emphasis was placed on a focused air flow and a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM PST is particularly suitable for use on heat sinks, radiators as well as pinhole and filters. Technical Details Fan: 140 mm, 200 - 1700 rpm (PWM controlled) Air flow: 72.8 CFM / 123.76 m³ / h (@ 1,700 rpm) Noise level: 0.3 sone (@ 1,700 rpm) Static pressure: 2.4 mm H2O (@ 1,700 rpm) Typical voltage: + 12 V DC Starting voltage: 3.9 V DC Cable length: 400 mm Sub PST Cable Length: 50 mm
Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Model: 45° compression fitting 13mmThis fitting has a 1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 13mm acrylic or brass tube. This fitting is bent 45° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical Specifications Material: brass Colour: chrome Dimensions Length: 44.5mm Width: 21mm Scope of Delivery 1x Alphacool Eiszapfen 13mm HardTube compression fitting 45° rotatable G1/4 for plexi- brass tubes - chrome Fitting MapYou can find an interactive map of all Alphacool fittings here.
Schwarzer Temperatursensor für Custom-Waküs, mit G1/4-Zoll-Innengewinde, inkl. Adapter auf G1/4-Zoll-Außengewinde, gängiger 2-Pin-Anschluss, voll vergossen und verzinkt
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®.(Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316, Dremel® - Art.No: 32196 and 32229) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 40cm WARNING:Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note:Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention:This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Extension 20mmThis slim adapter extends a ¼” thread by 20mm. This is mainly useful where a ¼” track is hard to reach or sits too far in. Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Length: 20mm Diameter: 18mm Scope of Delivery: 1x Alphacool Eiszapfen extension 20mm G1/4 outer thread to G1/4 inner thread - deep black
The step towards perfectionThe new Alphacool AGB comes in three different models. You can either connect a Laing DDC, the Alphacool DC-LT or the Laing D5/Alphacool VPP655 at the backplate depending on the model which you use. The brushed plate provides an optical finishing touch which is underlined by the high quality processing. The front consists of a scretch-secure soft-touch surface painted in black-matt. The Eisfach is mounted in two of the front 5,25" bays which provides a good overview of the container and the fill level is easily being checked through the lighted window at the back. Additionally, the Alphacool logo in the front can be lighted by connecting the 3-pin connector with a power source. A lot of details complement the first impression! Two 1/4" holes at the top side are available for the first filling. To refill you can simply remove and extract the fillport in the front and two 1/4" holes at the bottom side facilitate the draining of the liquid. There are two lighting modules at the right hand side at the back of the container behind the window for 5mm LEDs. This provides a unique opportunity for personalised lighting and optic. Further two holes at the left hand side provide additional opportunities to fill or drain the liquid. The last two 1/4" threads are used to fill or drain the container. A Bubble Down module has been placed behind the inlet to prevent turbulences that could lead air into the watercircle. Technical data:material: plastic and metalcolor: blackmeasurements (LxDxH): 148 x 132 x 84,5mmconnector thread: 10x 1/4"lighting: 2x 5mm LED Scope of delivery:1x Alphacool Eisfachmounting material Please note:The container is being delivered without a pump. Please order one seperately or together with this on as a set! Download 3D-file (.stp)
120 mm PWM-Lüfter im Slim-Format, mit Sealed Precision FDB-Lagern für hohe Lebensdauer & Laufruhe, 300 - 1.800 U/Min bei max. 30 dB(A), 14,1 - 86,3 m³/h Airflow, 1,35 mmH2O Luftdruck
