The Protium expansion tank from Singularity Computers is a 100mm tube with a diameter of 60mm. Together with the acrylic attachments, the expansion tank reaches a height of 139mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 x 60 x 139 mm (L x W x H) Diameter: 60 mm Material: Acrylic (lid, base, reservoir), Aluminium (retention rings) Color: Black, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 100 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
The nickel-plated adapter in matt black couples two tubes, which do not run on a common straight line, and ensures a bend of 30 degrees at the adapter. Two rubber rings seal both sides. The adapter is especially well compatible with the Crystal Link Tubes from Bitspower. Technical Data: Material: Nickel-Plated Brass Colour: Matt Black Angle: 30 ° Connections: 2x Ø 12 mm
120mm Dual-Radiator von Corsair, Kupfer- und Messing-Aufbau, bis zu vier 120-mm-Lüfter in Push/Pull-Konfiguration, 55 Millimeter Dicke und 13 FPI, 2x G1/4-Anschlüsse
The Protium reservoir from Singularity Computers is a 200mm tube with a diameter of 60mm. Together with the acrylic attachments, the reservoir The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 x 60 x 239 mm (L x W x H) Diameter: 60 mm Material: Acrylic (lid, base, reservoir), Aluminium (retention rings) Color: Silver, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 200 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
120 mm großer PWM-Lüfter, digital adressierbare RGB-LED-Beleuchtung (3-Pin), Drehzahl von max. 1.500 U/min, transparenter Rahmen und Lüfterblätter, inklusive Schrauben
EK-Quantum Vector N+ RX 6800XT/6900XT is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for SAPPHIRE NITRO+ 6800XT and 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector N+ RX 6800XT/6900XT water block for SAPPHIRE NITRO+ GAMING RX 6800 XT and 6900 XT GPUs EK-Quantum Vector N+ RX 6800XT/6900XT water block is compatible with SAPPHIRE NITRO Radeon RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of durable black POM Acetal. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum N+ Vector RX 6800XT/6900XT D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 9 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the N+ 6800XT/6900XT water block EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 285x149x16.5mm Enclosed EK-Quantum Vector N+ RX 6800XT/6900XT series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
The Protium expansion tank from Singularity Computers is a 250mm tube with a diameter of 60mm. Together with the attachments made of acetal and acrylic, the expansion tank reaches a height of 289mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data Dimensions: 60 × 60 x 289 mm (L x W x H) Diameter: 60 mm Material: acrylic (reservoir), acetyl (lid, base), aluminium (retention rings) Color: transparent, silver, black Ports: 7x G1/4" Scope of delivery: 1x 250 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
Backplate mit aktiver Kühlung von EK Water Blocks, für MSI Trio und Suprim 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a carbon black nickel plated, straight adapter with two 1/4 inch external threads. In addition, the connection is rotatable, which significantly simplifies the screwing. Note: The turning function of the connections should always be used in the disassembled state, as this is relatively stiff due to the design. When installed, do not apply force to connections to avoid damaging the connectors themselves and the radiators on them. Technical details:Material: brass, carbon black nickel platedConnections: male thread: 2x 1/4 inch
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This 45 degree angled G1 / 4 "fitting for hoses with 13mm inner diameter does not use a union nut, which is why any tube thickness and thus outer diameter can be used. The blood red connection can be turned on the side of the screw thread. This greatly facilitates installation and allows for precise alignment. Note: For a better and safer fit, we recommend using a cable tie or a hose clamp. Furthermore, the rotation function of the connections should always be used in the disassembled state, as this is relatively difficult to move due to the design. When installed, do not apply force to connections to avoid damaging the connectors themselves and the radiators on them. Technical details:Material: brassColor whiteConnections: Thread: G1 / 4 inch hose: 13 mm (inside diameter)
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®.(Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316, Dremel® - Art.No: 32196 and 32229) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 60cm WARNING:Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note:Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention:This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
Die R100B Reservoir’s der neuen ANTILA PURE-Serie von RAIJINTEK bieten einzigartige Regenbogen Effekte des A-RGB’s (5 V adressierbar) durch die eingebaute LED-Lichtkappe. Die Lösung befindet sich auf höchstem Niveau für PC-Enthusiasten und kundenspezifische PC-Modder, um ein Super-ARGB-LED-Effekt Wasser-kühlsystem zu erstellen. Die ANTILA PURE-Serie wird aus hochwertigem POM- und Echtglas hergestellt, um eine kristallklare, stabile, leise, leistungsstarke und langlebige Lösung zu bieten. Mit der ANTILA PURE-Serie können PC-Enthusiasten nicht nur ein bemerkenswert, wunderschönes Flüssigkeitskühlsystem bauen, sondern auch extern modulare Upgrades für ihr Gehäuse kombinieren. Eine robuste Montagehalterung bietet dem Benutzer auch eine zuverlässige, richtungsweisende Montagemöglichkeit und eine benutzerfreundliche Installation. Die ANTILA PURE-Serie ist das beste LED-Reservoir für Ihre Wasserkühlung Ihres Systems! Technische Daten: Anzahl: 1 Stück Dimensionen [l×b×h]: 77×77×173 mm Reservoir Dimensionen: 65×65×127 mm Kühlmittel Kapazität: 400 ml Material: POM + Glas + Aluminium + Stahl Material Gewicht: 780 g Schraubgewinde: G 1/4" Addressable LED: 12 LED Rainbow (4pin header, 2510 spec) – Addressable LED LED Control Method: Motherboard RGB HEADER/ Fernbedienung und RJK Control Box LED Input Connector: 4-PIN header (2.5 Crimp) LED Eingangsspannung: 5V
All-In-One-Wasserkühlung in Weiß, 360-mm-Radiator, drei 120-mm-ARGB-Lüfter, 3 austauschbare Pumpendeckel, Unendlichkeitsspiegel-Effekt, schönes Design und leiser Betrieb, angewinkelte Fittinge frei drehbar, kompatibel zu Sockeln von AMD und Intel (inkl. LGA 1700)
- Design For Multi-Function On Water-Tank Issue.- The Simple Design For Water Storage.- Both Top Made Of POM.- Tank Body Made Of Hi-Quality Acrylic.- RoHS Compliant.Toote värvLäbipaistevMaterjalAkrüülMõõdud (l x s x k)60 x 60 x 170 mm
High-End CPU-Wasserkühler von aqua computer, schwarzes Acetalgehäuse, vernickelter Kupferboden, für AMD Sockel AM4/AM5, mit Thermal Grizzly Kryonaut Wärmeleitpaste
Der Commander FP von Thermaltake ist ein PWM Lüfterhub und ist im Stande bis zu 10 unabhängige PWM Lüfter mit Strom zu versorgen. So ist es möglich das Gehäuse mit Lüftern vollzubauen und gleichzeitig eine gute Kabelordnung zu erhalten. Mit dem blauen LED Anzeigelämpchen, den vielfältigen Möglichkeiten zum Kabelmanagement, dem einfachen Einbau und dem schlichten Design, stellt das Commander FP sicher, dass das Gehäuse innen so gut wie außen aussieht.Bis zu 10 unabhängige PWM LüfterDer Commander FP ermöglicht, die Kühlungskapazitäten innerhalb des Gehäuses mit wenig Aufwand zu erweitern und eine bessere System Performance zu genießen.Praktische Stromversorgung über SATA-AnschlussMit einem stabilen SATA Anschluss versorgt der Commander FP sicher und zuverlässig bis zu 10 PWM Lüfter mit Strom. Der direkte Anschluss an das Netzteil beugt Ableitstrom bei der Nutzung des Lüfterhubs vor.Sauberes KabelmanagementDank der kompakten Größe und dem einfachen Aufbau ist der Commander FP ein einfaches Werkzeug für sauberes Kabelmanagement. Den gesparten Platz im Gehäuse kann man für andere Extras nutzen, wie zum Beispiel eine ausgefallene Wasserkühlung oder besseren Luftstrom.Hochwertiges symmetrisches DesignDer symmetrischen Aufbau und das hochwertig texturierte Plastik gibt dem Commander FP ein modernes Aussehen, welches der überragenden Performance entspricht.Einfache InstallationDer Commander FP wird zusammen mit 5 wiederverwendbaren Kabelbindern, 2 Haftstreifen, und einem PWM Signalkabel ausgeliefert. So werden die Kabel immer schön und ordentlich an ihrem Platz gehalten. Type Fan Control Supported Fans (Amount) 10 Connection 3 PIN / 4 PIN Colour Black Material Plastic Width (mm) 81 Height (mm) 44 Depth (mm) 18 Weight (kg) 0,09
The new premium fan series is based on the NB-Blacksilent-Chassis and is equipped with the excellent electronics module NB-EKA Plus and NB-NanoSLI bearings. Both are features that were so far used only in the more complex Multiframe series. Besides the technologically advanced components this fan is also equipped with an individually adaptive cable management. The fan is shipped with a newly developed mounting kit for vibration-free mounting which consists of an optimized "NB-Silentframe" silicone frame with suitable counter-pieces and knurled nuts for tool-free installation. Technical specifications: Dimensions: 140x140x25mm Colour: Black Weight: 135g Nominal voltage: 12V Starting voltage: 4,5V Current draw: 0,09A Nominal speed: 1200rpm (+/-10%) Airflow: 93m³/h / 54,74CFM Noise emission: 20 dB(A) MTBF (25°C): 140000hrs Connector: 3-Pin Molex plug with rpm lead Extent of delivery: 1x Noiseblocker NB-BlackSilentPRO PK2 ( 140x140x25mm ) 1x Fan decoupling 1x 3 PIN fan extension 20cm 1x 3 PIN fan extension 50cm 4x Mounting screws 4x Knurled nuts This product has been reviewed for you: Hardware-academy Tech-Review
Wenn Ihnen nur das beste gut genug ist... Mit der neuen Multiframe®-Technologie greifen wir bewusst nach der Spitze des Lüfter-Marktes! Die von uns patentierte NB-Multiframe® Technolgie bietet ein völlig neues Potenzial der Geräuschreduzierung bei Computern und Multimediageräten aller Art. Lautstärkemessungen durch den TÜV Nord bestätigen die besonders geringe Geräuschentwicklung und die klare Überlegenheit der neuen Lüfterserie! Die neue Multiframe® S-Serie ist als High End Serie auch sonst qualitativ hochwertig ausgestattet. Ein optimierter EKAPlus Antrieb mit extrem niedriger Startspannung, nahezu lautlose NB-NanoSLI® Lager und das Hightech Chassis mit Deepsounddesign sorgen für eine bisher unerreichte Laufruhe im Betrieb. Der PWM gesteuerte Highspeed Lüfter M12-P ist über die PWM Steuerung des Mainbaords von 1000 - 2000 U/min regelbar. Bei Volllast bringt der Lüfter die enorme Leistung von 133m3/h, ausreichend für jedes Setup. Auch eine manuelle Regelung von 4,5 bis 13,3 Volt ist möglich. Die Lautstärke bewegt sich von kaum wahrnehmbar bis deutlich hörbar. Natürlich ist die Lautstärke dennoch niedriger als bei jeden anderen Markenlüfter gleicher Leistung. (((NB))) - Technology - Made in Germany NB-Mulitframe® Technologie: Einzigartiges mehrteiliges Hightech Chassis mit integrierten Körperschalldämpfern. Schwingungsarmer glasfaserverstärkter Rahmen. Leise Highspeed Version mit PWM Steuerung: Extrem leistungssatrker Lüfter mit sehr gleichmäßigen Lauf, im Betrieb bis zu 30 % leiser als hochwertige Markenlüfter gleicher Leistungsklasse. Extrem niedrige Startspannung von 4,5V ! Höchste Sicherheit: Falschpol-und Überlastungsschutz, Restartfunktion, extrem ausfallsicher, 6 Jahre Garantie Extrem leise Lager extrem geräuscharme und langlebige NB-NanoSLI® Lager uvm. Extrem hochwertig und solide Hochpräzise fertigung, Materialmassierter Rahmen mit Deepsound Design Technische Details: Maße: 120x120x25 mm Nenndrehzahl: 1000 - 2000 U/min Lautstärke: 12 - 29 dB/A Förderleistung: max. 73 - 133 m³/h Spannbereich: 4,5 - 13,2 V Startspannung: 4,5 V Leistungsaufnahme: 2,64 Watt Druck: 2.838 mmH²O MTBF (25°): 130 000 std. Temperaturbereich: -10°C - 70°C Autostart Time: 3-5 sek. Garantie: 6 Jahre Lieferumfang: Noiseblocker NB-Multiframe MF12-P - PWM ( 120x120x25mm ) Dieses Produkt wurde für Sie getestet Review-Base Hardware-academy Whitex-Modd Hinweis: Bitte beachten sie den Unterschied zwischen einem 4 Pin Stromstecker (Molex) und einem 4 Pin Lüfteranschluss (PWM).
