Firma: MT Shop

PS version with PWM control from 600-1500rpm If you only take the very best... With the new Multiframe® technology Noiseblocker is reaching for the very lead in the fan market. The patended Multiframe® technology offers a whole new level of potential in noise reduction of PCs and multi-media devices. Noise emission measurements by the TÜV Nord confirm the extremely low noise emission and clear superiority of this new fan series! Thew new Multiframe® S series is designed to be a high-end fan series which is very well-equipped. An optimized EKAPlus motor with an extremely low starting voltage, a virtually silentNB-NanoSLI® bearing and the high-tech chassis with DeepSound design achieve a new benchmark in low-noise operation. The PWM-controlled high-speed fan M12-PS can be regulated via PWM by the Mainboard from 600-1500rpm. Under full load the very quiet fan brings an incredible airflow of 100m3/h, plenty for any system. The new revision 1.01 also features a removable silicone frame which which increases the pressure(e.g. on radiators). Manual control is also possible from 5.5V to 13.3V. The noise level ranges from barely perceptible to lightly audible. Of course thenoise emissions are still lower than with any other brand of fan at the same performance level. (((NB))) - Technology - Made in Germany NB-Mulitframe® technology: Unique multi-component high-tech chassis with integrated vibration dampeners. Low-vibration fibre-glass reinforced frame. Quiet high-speed version with PWM control: Extremely powerful fan with very even and quiet operation, up to 30% more quiet than high-class brand fans in the same performance class. Extremely low starting voltage of 5.5V! Highest level of safety: Reverse polarity- and overload protection, restart function, extremely fail-proof, 6 years of warranty Extremely quiet bearing extremely quiet and long-lived NB-NanoSLI® bearing and much more Extremely high quality and rugged design Highly precise manufacturing, heavy frame with Deepsound design Technical specifications: Dimensions: 120 x 120 x 25mm Colour: Black frame, grey fan blades Nominal speed: 1000 - 2000 rpm Noise emissions: 7 - 23 dB/A Airflow: 40 - 100 m³/h; 23,55 - 58,87 CFM Power consumption: 1,56W Connector: 4pin Warranty: 6 years Please note the difference between a 4-Pin power connector (Molex) and a 4-Pin fan connector (PWM) Extent of delivery: 1x Noiseblocker NB-Multiframe M12-PS - PWM ( 120x120x25mm ) This product has been reviewed for you: Hardware-academy

innovatek 500988

The nickel-plated adapter in the color shiny black couples two tubes, which do not run on a common straight line and provides at the adapter for a bend of 60 degrees. Two rubber rings seal both sides. The adapter is especially well compatible with the Crystal Link Tubes from Bitspower. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Black Angle: 60 ° Connections: 2x Ø 12 mm

The nickel-plated adapter in carbon black couples two tubes which do not run on a common straight line and provides a 90 degree bend at the adapter. Two rubber rings seal both sides. The adapter is especially well compatible with the Crystal Link Tubes from Bitspower. Technical Data: Material: Nickel-Plated Brass Colour: Carbon Black Angle: 90 ° Connections: 2x Ø 12 mm

The adapter in carbon black from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Carbon Black Connection: 12 mm (OD) Thread: G1/4" Thread Length: 5 mm

The adapter in carbon black from Bitspower has a G1/4" external thread and a G1/4" internal thread. It has an angle of 90 degrees. Technical Data: Material: Brass Colour: Carbon Black Angle: 90 ° Thread: G1/4" and inner G1/4" Thread : G1/4" Thread Length : 5 mm Thread : Inner G1/4" Thread Length : 6 mm

This filler neck in carbon black from Bitspower is used when coolant is filled into the cooling circuit from the top of the housing. To do this, cut a small opening in the housing, place the connection through the hole or on the edge of the hole and screw it on from the other side with the screw ring. The filler neck can be connected to the cooling circuit via a normal G1/4" female thread connection. After filling, the upper side should be sealed with a sealing plug. Technical Data: Material: Brass Colour: Carbon Black Thread: Inner G1/4" Thread Length: 15 mm

LiQuRizer kontroller set