A Y-cable to connect 9x4-Pin PWM fans to one 4-Pin PWM connector.As fan control via the Mainboard with a PWM fan is much more affordable than a fan controller, this cable is perfect to give more flexibility.The extension cable is sleeved with a black mesh which additionally protects the cable and looks great! This further expands the lifespan of the cable. The ends towards the connectors are fixated with heatshrink for a clean finish.A white marking on one of the split cables shows from which cable the rpm signal is transmitted.Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look.The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables.Technical specifications: Connectors: 1x 4-Pin PWM male9x 4-Pin PWM femaleColour: Black sleeve, black connectors, black heatshrinkDimensions: Overall 60cmConforms with RoHSExtent of delivery: 1x Phobya Y-cable 4-Pin PWM to 9x4-Pin PWM 60cm - black
This cable can be used to connect the alarm header of an aquastream ULTIMATE, poweradjust 3 or mps family device with the power switch header of a computer motherboard. This allows for an emergency shutdown of the PC in case of an alarm condition. The cable is to be connected in between motherboard and PC case power switch, the power switch remains operational. Total cable length approx. 70 cm. Scope of delivery One cable Compatible with aqualis XT aquainlet XT D5 pump with USB and aquabus interface Pump adapter/pump module for aqualis with fill level senso aquastream ULTIMATE Flow sensor high flow USB Flow sensor mps flow Pressure sensor mps pressure poweradjust 3 USB Before connecting the cable, make sure the RPM/alarm header of the device is configured correctly! Configuration for mps devices (aquasuite Software)Tab "Alarm configuration": "Power switch (53217)" has to be activated. Configuration for aquastream ULTIMATE (aquasuite Software)Tab "Alarms": "Power switch (53217)" has to be activated. Configuration for poweradjust 3 (aquasuite Software)Tab "Alarm configuration": "Power switch (53217)" has to be activated. After connecting the cable, test the setup by deliberately creating an alarm condition. If the PC is not shut down, the cable header connected to the motherboard must be rotated by 180 degrees and the test has to be repeated. Emergency shutdown may result in data loss as operating system and running programs are not shut down properly!
Extension cable for 3-Pin cables e.g. for fans. With rpm signal lead. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. Sets: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors: 3-Pin extensionBlack sleeve, black connectors and black heatshrinkLength: 60cmConforms with RoHS Extent of delivery: 1x Phobya extension cable 3-Pin Molex 60cm - black This product has been reviewed for you:AquainfosTech-Review
A cable to connect the PSU to a graphics card. This cable is designed to connect a graphics card with a 6-Pin power connector to a PSU with only 4-Pin Molex connector or too few 6Pin connectors for Multi-GPU systems. The cable has two 4-Pin Molex connector on one end and a 6-Pin graphics card power connector on the other end. Technical details: Color: Black connectors, yellow/black cable Connectors: 4Pin Molex and 6-Pin PCI Express Length: 2x 15cm Extent of delivery: 1x PCI-E power adaptor 2x 4-Pin Molex to 1x 6-Pin PCI-E>
A cable for extension or adaption or a 6-Pin plug. This cable is shipped completely sleeved. This doesn't just look great, it also protects the cable which can increase the lifespan of the cable significantly. And it looks just great! Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called sleeve, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors and Colours: 6-Pin black plug, 6+2-Pin black, black cablesConnector: 6+2-Pin PCIeLength: 30cm Extent of delivery: 1x Phobya PCIe power adaptor 6-Pin --> 8-Pin PCIe (or 6+2-Pin) 30cm - black This product has been reviewed for you:AquainfosTech-Review
This ribbon cable if perfect for DIY projects. 10 leads connected parallely end the cable mess inside of the case. The cable is very flexible and only 0.9mm thick which makes it easy to hide for a clean cable management. The cable can be used for a widespread field of applications. Especially when using a large case with many LEDs, fans or similar accessories the inside of the case is often plastered with a multitude of cables. This cable now allows the creation of extensions and adaptors of any desired length for a cleaner cable management. Color order: Brown, red, orange, yellow, green, blue, violet, grey, white black Technical specifications: Material:Copper, Plastic Length: 3m Thickness: 0,9mm Width: 13mm RoHS: Conforms 10-lead Extent of delivery: 1x Ribbon cable AWG28 10-lead. 3m
Connection cable for installation between computer and printer or joystick. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Length: 300cm Colour: Black sleeve, black connectors, black heatshrink Connector type: Plug to plug Extent of delivery: 1x Phobya serial cable DB9 1:1 (plug to plug 9-Pin) connection cable 3m - black sleeved This product has been reviewed for you: Aquainfos Tech-Review Extremehardware (it.)
This cable permits operation of two PSUs in one system with one power button. Integration of this cable is extremely easy: Connect the first PSU to the Mainboard as usual, and connect the second one with the additional ATX plug. Of course both power supplies need to be connected to a 230V mains supply. Now both power supplies will start simultaneously when the power button is pushed, and both will also shut down when the system is shut down. The advantages of Dual PSU use are great! -New PSUs don't have to be so expensive any more - older PSUs can be re-activated - More connection possibilities - Bridging of distances is easier - and much more! Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Length: 10cm and 20cm Color: Black sleeve Connectors: 2x 24-Pin to 1x 24-Pin Extent of delivery: 1x Phobya 24-Pin dual PSU start cable (2x 24-Pin to 1x 24-Pin), individually sleeved - black
A Y-cable for distribution of the VGA power connector on the PSU to multiple graphics cards.The majority of PSUs is not equipped with sufficient connectors for operation of a SLI or Crossfire system. With only one power connector, it is hard to sufficiently supply power to the second graphics card. The solution is this new Y-cable from Phobya. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called sleeve, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Length: 30cm Colour: Black Extent of delivery: 1x Phobya Y-Kabel 8Pin Buchse auf 2x 6+2Pin Stecker (VGA) - Schwarz
With this cable it is possible to expand the front panel. The cable leads are sleeved with fine mesh sleeving, fitting into the system perfectly. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called sleeve, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Cable length: 30cm Colour: Black Extent of delivery: 1x Phobya front panel extension 30cm - black
This cable is used to connect the 2/2 way magnet valve from Alphacool. The 4-pin molex connector supplies the valve with 12V power. Two of the cable sockets are attached to the valve, the other two to an on/off switch. This allows the valve to be opened and closed manually. For a more detailed explanation, please watch the linked video. Technical Specifications: Cable - sleeved Length: 50cm Scope of Delivery: 1x 4-pin molex single adapter for Alphacool magnetic valve 50cm - black Notice:The first time connecting the cable socket to the magnetic valve will require somewhat more effort.
MO-RA IV Tank D5 – The perfect addition to your MO-RA IV radiator! Experience the highest quality and stylish design with the MO-RA IV tank. Made from solid acetal and equipped with a highly polished Plexiglas GS front, this tank not only offers functionality, but also a stylish upgrade for your MO-RA IV system. The brushed stainless steel cover conceals an aRGB module that indirectly illuminates the tank and reflects the finely engraved MO-RA logo. Optimized flow and easy installation The MO-RA IV tank is flow-optimized and ensures increased flow and easy venting. The direct connection to the radiator via a special connector and the integrated D5 pump guarantee maximum flow rates. Installation is child's play - just plug it on and hang it in. Thanks to the decoupling from the radiator housing, vibrations from the pump are effectively eliminated. Expandable pump modules For even more performance, the MO-RA IV tank can be expanded with an additional pump module, so that the use of two D5 pumps is possible without any problems. Technical data: Material lid: acrylic Material Body: Acetal External dimensions (L x W x H): 350x84x49mm Weight: approx. 1.35 kg Top filling openings: 2x thread G 3/8 inch Rear connection: 1x adapter to G 1/4 inch Bottom connection: 1x thread G 1/4 inch Capacity: 0.33 liters Compatible: MO-RA IV 200/400 (only one pump / no extension possible) Compatible: MO-RA IV 600 Scope of delivery: 1x MO-RA IV Tank 275 D5 1x MO-RA IV tank connection adapter G 1/4" 1x mounting material
Recommended for the following Thermal Grizzly pastes: Aeronaut, Hydronaut, Kryonaut, and Kryonaut Extreme. The Thermal Grizzly Spatula, in its basic version for thermal paste, is an essential tool to ensure precise and even application. These plastic spatulas are soft and have lower hardness compared to metal tools, reducing the risk of scratching or damaging the surface of the CPU or other components where the thermal paste is applied. Plastic spatulas also offer the added benefit of being non-reactive with the metallic components of thermal compounds. Notes: Care should be taken to ensure that the spatula used is clean and free from residues or impurities. Residues on the applicator may affect the results of the application. The spatulas should only be used with thermal paste. The TG Spatula is recommended for Aeronaut, Hydronaut, Kryonaut, and Kryonaut Extreme, and is supplied in a convenient pack of three.
This connection cable can be used for connection of different devices from aquacomputer via the aquabus interface. Technical specifications: 4-Pin molex sockets (compatible with fan connectors), 1:1 connection Length approx 70cm incl. connectors
Our colored interchangeable struts are a easy way to customize your HEATKILLER® Tube Series reservoir. The struts are made from solid aluminum. The colored versions have a high end anodically oxidized finish. Delivery includes four struts. One of them is designed to hold a LED strip. Corresponding LED strips are available separately. Please be careful to choose the correct strut length for your tube. The name of your HEATKILLER® Tube Series tells you its length, for example a HEATKILLER® Tube 100 requires 100mm long struts. Technical data: Length: 150mm Material: Aluminum Color: red Scope of delivery: 1x strut designed for HEATKILLER® Tube 150 LED illumination module 3x strut for HEATKILLER® Tube 150
The compact aquarium pumps for use under water The EHEIM compactON aquarium pump is characterized by its name through a compact design and is thanks to the included accessory bag appropriate for versatile use – the EHEIM compactON 2100-5000 can also be modified for the use outside of the water. Thanks to the high quality material it is also possible to use them without problems in marine water. For even more flexibility, the flow rate is adjustable for all models, except for the EHEIM compactON 5000. Advantages of the EHEIM compactON Successor of the compact and compact+ series Fastening by means of robust suction cups Including accessories such as suction basket and threaded coupling Silent due to ceramic bearing (EHEIM compactON 2100 and EHEIM compactON 3000) High pump performance at low power consumption compactON 5000 as electronic version for more efficiency Technical Details: Pump power per hour at 50 Hz: of 400 l Pump power per hour at 50 Hz: to 1000 l Pumping head at 50 Hz approx. (H max): 1.4 m Power at 50 Hz: of 15.00 watt Dimensions (WxHxD) 47 x 79 x 73mm Hose Ø pressure side: 16mm voltage 230 volt Frequency 50 Hz Standard power plug EUR Freshwater yes Sea water yes Manual in multiple languages (DE, FR, EN) Manual in multiple languages (ES, IT, PT, NL)
Technical Data: Material: Nickel-Plated Brass Colour: Black Supported Tube: 16/10 mm Thread: G1/4", male Thread Length: 4,5 mm Outer Diameter (Fitting): 23 mm Installed Height: 19 mm Compatible Soft Tubing: PVC, EPDM, Norprene, Silicone and most other flexible tubes
With the Alphacool Eisstation, you get a compact reservoir that fits into nearly any case. It comes in three different versions. A DDC, a D5, and a DC-LT version are available.Highlights The cap is made of sturdy Nylon Three versions for all current pumps Numerous mounting options Illuminated logo and LED mounting optionsThe Alphacool Eisstation reservoir is extremely compact and is available in three versions suited for different pumps. D5, DDC and DC-LT versions are available. Each pump is installed in the bottom of the Eisstation and is not visible from the outside. The bottom of the Eisstation is a metal plate that reduces vibrations and increases the stability of the Eisstation.Mounting possibilitiesThe installation options are numerous and comprehensive. The Eisstation can be screwed onto a 2.5” SSD bracket. It can also be mounted in a 3,5” bay. In either case, the special decoupling screws included with the Eisstation are used for mounting it. This minimises the transfer of vibrations to the case, lowering the operating volume significantly. Another installation option is the included Velcro fastener. One part of the Velcro is glued to the bottom of the Eisstation, while the other part is glued to the case. Then all that’s left is to press the Eisstation’s bottom against the corresponding Velcro on the case. The size of the Velcro ensures secure positioning even during transport. The Eisstation can be mounted vertically or horizontally, depending on personal taste and available space.Connection possibilitiesThere are four possibilities for connection. An IN and an OUT with G1/4 threads are located on the top, with the illuminated logo. In the cap, there is one G1/4” and one G3/8” connection available. The G3/8” connection, with its larger size, simplifies filling the Eisstation and can also serve as a lighting module for 5mm LEDs. Two additional 5mm LED places can be found in the bottom of the reservoir and illuminate the water-filled portion from below.A highlight of the Eisstation is the materials it is composed of. The bottom portion has a high-quality soft-touch surface which gives it an outstanding look and feel. The upper portion and the reservoir itself are not made of simple, easily breakable Plexiglas, but rather of extremely sturdy Nylon. While normal reservoirs made of glass or Plexiglas can break or crack due to falls, even from a small height, or due to improper handling, it is nearly impossible to damage the Eisstation’s clear container. Technical dataDimensions (L x W x H)102 x 82 x 105mmMaterialNylon / PMMACapacity250mlThreadG1/4"Connections3x G1/4" / 1x G3/8"Power connection LED Logo3 PinLighting modules4x for 5mm LEDColorblack/transparent
Tubing is the veins of a water cooling system! These are the next generation, made by Alphacool! Deep, intense colours as well as comfortable handling during installation and connection were our focus in developing these tubes. The result is tubing in a variety of sizes and colours, such as red, green, blue, or black. In developing these tubes, we specifically ensured that there would no longer be any need to deal with colour particles in the coolant fluid, but rather that all the colour would come from the tubing itself. Besides the colour, the installation and bending properties are of course very important in tubing. The ability to span a tight bend radius and comfortable handling in tricky spaces were also emphasised during development. This was optimised to perfection by mixing different combinations of synthetic materials, resulting in tubing that manages to bring opposing goals together in harmony and that will satisfy both amateur enthusiasts and experienced water cooling users! Manufactured in Germany, with the promise of consistent high quality. Our years of manufacturing experience guarantee that any product we sell is the best. Technical Specifications: Material: PVC Colour: UB Black Inner diameter: 10mm, 3/8" Outer diameter: 13mm, 1/2" Wall thickness: 1.5mm, 1/15" Scope of Delivery: 1x Alphacool Tubing AlphaTube HF 13/10 (3/8"ID) - UV black 1m (3.3ft) Retailbox
Replacement Stands for the "Eisbecher/Eisdecke" Series. Technical Specifications: Dimensions (HxWxL): 65 x 13 x 72mm Height from bottom to middle mounting hole: 60mm Scope of Delivery: 2x Stand 4x M4 hexagon socket screw
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:This angled adaptor can be used to elegantly work around obstacles in the system. The 45° angle and the revolvable design allow easy adjustments after the adaptor is installed. The outer thread allow connection to the cooling component and the inner thread can be used to connect the fitting of your choice. Technical specifications: Material: Brass, chromatizedColour: Deep Black Dimensions:Length: 24mmWidth: D18mmHeight: 33mm Extent of delivery:1 x Alphacool HF angled adaptor 45° G1/4 outer thread to G1/4 inner thread revolvable - Deep Black This product has been reviewed for you:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)
Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Model: Y-connector 45° - G1/4 rotatable - 2x inner 1x outer threadThis fitting has a 1/4" outer thread on one side and is thereby compatible with 95% of components. The other side has two 1/4" inner threads and can be used as an adapter. Technical Specifications Material: brass Colour: deep black Dimensions Length: 44mm Width: 18mm Height: 33mm Scope of Delivery 1x Alphacool Eiszapfen Y-connector 45° rotatable G1/4 outer thread to 2x G1/4 inner thread - deep black Fitting MapYou can find an interactive map of all Alphacool fittings here.
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: L-ConnectorThis 90° angle adapter has a ¼” internal screw thread on both sides. Its compact shape makes it perfect for hard-to-reach spaces. Technical Specifications: Material: Brass Colour: Chrome Dimensions: Length: 25mm Width: 25mm Height: 18mm Scope of Delivery: 1x Alphacool Eiszapfen L-connector G1/4 inner thread to G1/4 inner thread - chrome
Thermaltake Pacific C-PRO G1/4 PETG Tube 16mm OD Compression – Black (6-Pack Fittings) The Pacific C-Pro Series is a revolution in fitment design. It simplifies the process of setting up a liquid-cooling loop and provides a seal that outperforms traditional compression fittings. By using 4 preinstalled O-rings and an overhauled design, the C-Pro Series is the new standard in fitment technology and it is exclusive to Thermaltake.
