Firma: Arvutitark OÜ

Very high-performance thermal pad, with good thermal conductivity and 1.0 mm thickness, size of 120 × 20 mm.

3x 120-mm PWM fans optimized for use in cases Daisy-chain for less cable clutter Good cooling at up to 1,800 rpm and quiet operation at a maximum of 23.8 dB(A) Stylish lighting thanks to addressable RGB LEDs Regular orientation for standard airflow High airflow of 99.46 m³/h Jonsbo ZL-120B Reverse ARGB fan in detail The Jonsbo ZL-120B Reverse is a powerful 120-mm fan with a reverse design, specially developed for use as a case fan. Thanks to the reverse design, the fan can move air in the opposite direction, which ensures more efficient cooling in certain case configurations. It features daisy-chain, a plug-in system that reduces the number of cables in your gaming PC and contributes to a cleaner look. With its addressable RGB lighting, it doesn’t just look stylish but also delivers plenty of power. Thanks to the built-in hydraulic bearing, you benefit from a significantly extended lifespan for your device, allowing for reliable and low-maintenance operation in the long term. Efficient cooling at low noise levels The Jonsbo ZL-120B Reverse adjusts its speed via a PWM signal according to the system’s requirements. This enables precise adjustment of the fan speed from 800 to 1,800 rpm. Even at full load, it operates at a volume of just 28.8 dB(A). Each corner is also fitted with rubber pads to decouple vibrations and minimize noise. With an airflow of up to 99.46 m³/h and a static pressure of 2.0 mmH₂O, the CPU is effectively cooled.

Extrem leistungsfähiger Dual-Tower-Kühler mit 260 W TDP Sechs 6-mm-Heatpipes 2x PWM-Lüfter im 120-mm-Format Hohe Kompatibilität zu AMD und Intel Halterung für einfache Montage Integrierte Beleuchtung an Lüftern und Rahmen Der Jonsbo CR-3000E CPU-Kühler: Der Jonsbo CR-3000E CPU-Kühler bietet durch seine sechs Heatpipes und den PWM-Lüfter eine extrem hohe Kühlleistung. Der außerdem sehr leise Kühler besitzt mit 260 W TDP immense Kühlreserven für übertaktete CPUs und lässt sich trotz seiner Größe auch bei installiertem Mainboard montieren. Schlichtes Design mit starker Kühlleistung Beim CR-3000E handelt es sich um einen leistungsfähigen Dualturm-Kühler, der durch seine beiden Lüfter eine sehr effiziente und leise Kühlung ermöglicht. Die laufruhigen Lüftermotoren sorgen dabei für reduzierte Vibrationen und in Verbindung mit dem Lager für eine sehr lange Haltbarkeit. Perfekte Kühlung für deine CPU inklusive Lichteffekten Dank sechs Hochleistungs-Heatpipes gewährleistet der Kühlkörper einen exzellenten Wärme-Abtransport. Die Lamellenfläche des Kühlers ist durch das Dualturm-Design sehr groß, sodass besonders viel Wärme an die durchströmende Luft weitergegeben werden kann. Zusätzlich ist noch eine Beleuchtung verbaut, die dein Setup aufwertet und für einen extra hingucker sorgt.

SobilikArvuti korpusTüüpVentilaatorVentilaatori läbimõõt6 cmÜhilduvad protsessoriseeriadEi ole toetatudPöörlemiskiirus (max)2500 RPMMüratase (suur kiirus)16,8 dBMaksimaalne õhuvool17,1 cfmÕhuvool29 m³/hKeskmine tõrkeintervall (MTBF)100000 hToote värvMustPinge12Laius60 mmSügavus60 mmKõrgus25 mm

SilverStone SST-FHP141

When putting down, nothing beats smooth and easy. That is why we created the PK-2 thermal compound. The PK-2 thermal compound is a high performance thermal bonding agent specially designed for easy application.PK-2's core feature is its low viscosity, allowing for one to quickly and easily apply the thinnest coat of thermal compound possible.This will get your components up close and personal in no time.Soojusjuhtivus10,2 W/m·KKaal5 g

Prolimatech Thermal Compound PK-3, 5g (PK35g)

- True Hi-Flow Design.- Hi Quality Brass Material.- 90-Degree Type With Dual 360-Degree Rotation.- High Durability Nickel Finished In Silver Shining Color.- Hiding O-Ring Design.- RoHS Compliant.Toote värvHõbeMaterjalMessing

- True Hi-Flow Design.- Hi-Quality Brass Material.- With 360-Degree Rotation.- High Durability Nickel Finished In Black Sparkle Color.- Universal IG1/4" X3 In Q-Rotary Application.- RoHS Compliant.Toote värvMustMaterjalMessing

Schwarzer Slim-Singleradiator (27 mm) von Magicool für beidseitig 1x 120-mm-Silent-Lüfter, 16 FPI, Dual-Pass-Design

To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a carbon black nickel plated, straight adapter with two 1/4 inch external threads. In addition, the connection is rotatable, which significantly simplifies the screwing. Note: The turning function of the connections should always be used in the disassembled state, as this is relatively stiff due to the design. When installed, do not apply force to connections to avoid damaging the connectors themselves and the radiators on them. Technical details:Material: brass, carbon black nickel platedConnections: male thread: 2x 1/4 inch

The nickel-plated adapter from Bitspower in the color shiny black, has an angle of up to 90 degrees, a G1/4" internal thread and a G1/4" external thread. The special feature of this adapter are the three swivel joints, so that the alignment of e.g. tubes becomes even easier and more flexible. Technical Data: Material: Nickel-Plated Brass Main Color: Shiny Black Angle: up to 90° Thread: 1x G1/4", 1x Inner G1/4" Thread Length: 5 mm

To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a blood red finish for 1/2 "or 13mm inner diameter tubing. This can be closed temporarily or permanently unneeded hose ends. Since a plug-in connection was installed, any tube thickness or outside diameter can be used. The end itself forms a screwed closure, which is screwed into a G1 / 4 inch thread and isolated by a sealing ring. If necessary, the thread can also be used to tie other components, which requires a normal external thread with G1 / 4 inches. Note: For a better and secure fit of the hose, we recommend the use of a cable tie or hose clamp. Technical details:Material: brassColor: blood redConnections: Plug connection: 13 mm

Noiseblocker NB-eLoop X B12-P ARGB, PWM - 120mm, black Fan

Iceberg IceGALE ICEGALE12-A0A

Iceberg Thermal IceGALE ARGB

4-fach-Lüftersteuerung von Lamptron, mit 36 Watt pro Kanal, für PCI-Blende in Silber

EK Water Blocks EK-Torque STC-16/12 color ring pack of 10, purple. These exchangeable rings for the 16 / 12mm Soft-Tube compression fittings from EKWB are made of aluminum, are available in different colors and give your system a unique look. Compatibility: EK-Quantum Torque STC-16/12 connections Technical specifications: Color Purple Material: aluminum Quantity: 10 pieces

Gewinkelter 45-Grad-Adapter in Schwarz für Hard-Tubes mit 16-mm-Außendurchmesser

The vertical bracket from Singularity can be used to mount a Protium series reservoir or pump attachment vertically on a 120 or 140 fan slot of a radiator. It is even possible to mount two reservoirs or pump attachments. Technical Data Colour: Silver Material: Aluminium (mounting plates), Stainless Steel (screws) Scope of Delivery: 2x SC Universal 120/140 Back Plate Mounting Plate 2x Vertical mounting plate 4x M4 Button Head Hex (10 mm) 4x M4 Countersunk Hex (10 mm) 4x M4 Washers 4x M4 Nut

Wärmeleitpad für Höchstleistungen, 2 mm Stärke, 100 x 100 mm Größe

120-mm-PWM-Lüfter von Lian Li, einzigartiges Stecksystem für weniger Kabelsalat, mit adressierbaren RGB-LEDs, Unendlichkeitsspiegeleffekt an Seite und Front, max. 2.100 U/min, max. 104 m³/h Fördervolumen, max. 2,66 mmH2O statischer Druck

All-in-One water cooling from InWin, 360mm radiator and copper plate, cooling block with striking Nebula lighting, fans with integrated RGB lighting, high compatibility with Intel and AMD sockets.

All-in-One water cooling from InWin, 240mm radiator with integrated pump, fan, and cooling block with integrated RGB lighting, high compatibility with Intel and AMD sockets.

Jonsbo CR-1000 Evo

Very high-performance thermal pad with good thermal conductivity and a thickness of 0.5 mm, size of 100 × 100 mm

Dimensions: - Inner diameter of 12 mm- Outside diameter 16 mm (5/8 ")- Length 100 cm x 4

FQ141 represents SilverStone’s pursuit of a design that balances performance and tranquility. Its included PWM module allows motherboard to control fan speed and regulate the temperature inside your chassis with optimal efficiency. It has custom designed dual fan blades for increased air pressure performance without additional noise. These features not only improve ventilation but also decrease operating noise.SobilikArvuti korpusTüüpVentilaatorVentilaatori läbimõõt14 cmToetatud protsessoripesadEi ole toetatudÜhilduvad protsessoriseeriadEi ole toetatudPöörlemiskiirus (min)500 RPMPöörlemiskiirus (max)1000 RPMMüratase (aeglane kiirus)14,7 dBMüratase (suur kiirus)20,7 dBMinimaalne õhuvool31,4 cfmMaksimaalne õhuvool62 cfmMinimaalne õhusurve0,28 mmH2OMaksimaalne õhusurve1,21 mmH2OKeskmine tõrkeintervall (MTBF)150000 hToote värvSinine, ValgeMaterjalPlastPinge12Nimivool0,11 AVentilaatori mõõdud (laius x sügavus x kõrgus)140 x 140 x 25 mmVentilaatori kaal133 g

If you always desire the best... With the new Multiframe® technology the peak of fan design is set again! The Multiframe® is patented by us and offers a whole new dimension of possibilities for noise reduction in PCs and Media appliances of all kind. Noise level readings by the TÜV Nord confirm the extremely low noise level and clear advantage over other fans. The Multiframe® series as a High-end series is equipped with only the best components: An optimized EKA Plus with an extremely low starting voltage, almost inaudible NB-NanoSLI® bearings an the High-End Chassis with Deepsound design all achieve an unprecedented silent operation. The M8-S3 is a faster fan for higher cooling needs such as CPU coolers etc. Slightly audible but much more silent that common fans at the same Airflow. NB-Mulitframe® technology: Unique Multi-part Hightech Chassis with integrated vibration absorbers and a vibration-reducing fibre-glass reinforced fame. Extremely low starting voltage of only 4,5V! Powerful yet silent operation: Smooth and extremely quiet operation Highest safety: Inverse polarity protection, overload protection, Restart-function, extremely fail-safe, 6 years warranty Extremely quiet bearing Long-lived and quiet NB-NanoSLI® bearings and much more Great and precise build quality Highly precise manufacturing, massed frame with Deepsound design Technical details: Dimensions: 80 x 80 x 25 mm Nominal speed: 2200 rpm Noise level: 19 dB/A Airflow: max. 59 m³/h Voltage range: 4,5 - 13,2 V Starting voltage: 4,5V Power draw: 2,04 W Pressure: 2.151 mmH²O MTBF (25°): 140 000 hrs Temperature range: -10°C - 70°C Autostart Time: 3-5 sec Warranty: 6 years Extent of delivery: Noiseblocker NB-Multiframe M8-S3 ( 80x80x25mm )

The high performance thermal pads of the Thermal Grizzly Minus Pad series consist of a very elastic and flexible surface area with very high thermal conductivity, compensating for even the smallest of gaps between components. Available in a variety of different sizes and thicknesses. High thermal conductivity High compressibility Electrical insulation The easy to process and flexible minus pads are made up of different constituents, based on a ceramic silicon formula complex and nano aluminum oxide. Thus, the pads ensure a constant, optimal heat transfer. The lightest of touches is enough to attach them optimally. All pads are ecofriendly and RoHS-compliant. Technical Data Temperature range: -100°C / +250°C Dimensions: 100 x 100 x 2mm

The stylish ball valve of Bitspower in the colour shiny silver, allows the stopping of the cooling circuit and is ideal for systems where regular modifications are made. At both ends the ball valve has two G1/4" female threads, for two suitable connections. The material is nickel-plated brass. Technical Data: Material: Nickel-Plated Brass Main Color: Shiny Silver Handle Color: Black Thread: Inner G1/4" x2

Laing DDC are among the elite of PC water pumps and are the reference for their high pressure, especially for high-flow systems. The only drawback are the non-standard connectors of Laing, which is why many manufacturers Wakü alternative covers with G1 / 4-inch -Windings offer. The connection specialist Bitspower also offers a simply elegant lid made of the heat-resistant special plastic Acetal or POM. For exactly this cover, the upgrade kit described in this article is intended. This includes a reservoir as well as a lid and floor element made of red but transparent acrylic. The reservoir has a height of 150 mm. Technical details:Material: AcrylHeight: 150 mlThread: 2x G1 / 4 inchesCompatibility: Bitspower DDC Top

Vorgemischte Kühlflüssigkeit von Alphacool, 1.000 ml Inhalt, Klar UV-aktiv, langlebige Farbstabilität, dauerhaft einsetzbar, geringe elektrische Leitfähigkeit, sehr guter thermischer Leitwert

Schwarzer Radiator im X-Flow-Design, für bis zu sechs 120-mm-Lüfter in Push/Pull-Konfiguration, Vollkupfer-Aufbau mit schwarzem Stahl-Rahmen, 30 Millimeter Dicke und 16 FPI, 4x G1/4-Anschlüsse

Dual 4-Slot Anschlussterminal von EKWB, aus schwarzem Acetal, mit Parallel-Schaltung, für EK-Vector- oder EK-FC-Wasserkühler

Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®.(Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316, Dremel® - Art.No: 32196 and 32229) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 60cm WARNING:Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note:Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention:This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter

Leistungsstarker CPU-Kühler von Aerocool, integrierte digital adressierbare RGB-Beleuchtung, ein 120-mm-PWM-Lüfter mit ARGB-LEDs, TDP von 145 Watt, hohe Kompatibilität zu Intel- und AMD-Sockeln

The EK-Quantum Scalar Flow Indicator is a high-quality GPU-mounted flow indicator with addressable D-RGB illumination. It visually represents the coolant flow rate, which is often difficult to see with the naked eye. This can be very useful to immediately see if your loop is in perfect condition or if there are problems with the pump or flow. It has dedicated G1/4" inputs and outputs. It is essential to ensure that the labelled connections are connected correctly. This product is compatible with the common RGB synchronisation technologies of all major motherboard manufacturers. The anodised aluminium cover hides the LED hotspots and provides uniform illumination. Enclosed: EK-Quantum Scalar Flow Indicator Bottom-Top D-RGB - Black G1/4" nickel-plated brass plug x 1

Compression Fitting von EK Water Blocks, für Schläuche mit 16/12 mm AD/ID, mit optionalen Ringen farblich individualisierbar, 6er-Pack

Leicht nachrüstbarer, magnetisierter Side-Staubfilter für das Corsair Air 540 - komplett Schwarz

Extrem einfach nachrüstbarer DEMCiflex-Staubfilter für das Bottom des Lian Li PC-O11 Air - komplett Schwarz