Stylische Sleeves von CableMod, für Hydro-AiOs von Corsair & EVGA & NZXT, Textil-Sleeving aus ModMesh-Material, einfache Installation in wenigen Minuten
This connection cable can be used for connection of different devices from aquacomputer via the aquabus interface. Technical specifications: 4-Pin molex socket to 4-Pin molex plug, 1:1 connection Length approx 40cm incl. connectors
Tootekirjeldus inglise keeles:To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a matte black straight adapter of 3/8 inch OD to G1 / 4 inch female, designed specifically for the inputs of the Eheim 1046 and 1048 pumps and the 1250 output. Before screwing in the adapter, the sealing ring should be coated with a lubricant, as otherwise it could be pulled out of its groove and exerts too much pressure on the plastic ring of the pump in the upper area. Alternatively, it is sufficient not to fully screw the adapter, but only up to the rubber itself. Technical Details:Material: brassColor: matt blackThread: G1 / 4 inch (internal thread)Compatibility: EHEIM 1046 (inlet) EHEIM 1048 (inlet) EHEIM 1250 (outlet)
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a white, straight adapter with two 1/4 inch external threads. Technical details:Material: MessingColor whiteConnections: male thread: 2x 1/4 inch
The Bitspower fittings are the ideal complement for water cooling systems. The G1/4" screw connection with union nut in matt black is suitable for 16/10mm Soft Tubes (as well as for 16/11mm). Technical Data: Material: Brass Color: Matt Black Thread: G1/4 Zoll Thread Length: 5 mm Tubing Size: 16/10 mm (ID 3/8", OD 1/2")
The nickel-plated adapter from Bitspower in the color shiny black, has a G1/4 inch internal thread and a G1/4 inch external thread. Technical Data: Material: Nickel-Plated Brass Main Color: Shiny Black Thread: 1x G1/4", 1x Inner G1/4" Thread Length: 5 mm
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a straight G1 / 4 inch screw connection for 10 / 8mm hoses with union nut in a matte black edition. Compared to the normal version of the hose connection is slightly less tapered. Although this requires a slightly more difficult attachment, but provides a tighter fit. Note: We recommend for the installation and removal of the connection an 18-mm open-end wrench. Please note that even when using tools the connection may only be tightened hand-tight. You can find our tool here . Technical details:Material: brassColor: matt blackThread: G1 / 4 inchesSuitable for: 10/8 mm hose
The adapter in the color shiny silver from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Connection: 12 mm (OD) Thread: G1/4" Thread Length: 5 mm
The nickel-plated adapter in the color shiny black couples two tubes, which do not run on a common straight line and provides at the adapter for a bend of 60 degrees. Two rubber rings seal both sides. The adapter is especially well compatible with the Crystal Link Tubes from Bitspower. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Black Angle: 60 ° Connections: 2x Ø 12 mm
Toote kirjeldus inglise keeles:To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a black glossy nickel plated, straight adapter with two G1 / 4-inch external threads. The special feature: The length of the adapter can be flexibly adjusted between 22 and 31 mm (measured without thread). For this purpose, only one nut is loosened, one side pulled out as desired and then fixed again with the union nut. Technical details:Material: brass, black nickel platedConnections: male thread: 2x G1 / 4 inchLength: 22 - 31 mm (variable)
The nickel-plated adapter in the color shiny black couples two tubes, which do not run on a common straight line and provides at the adapter for a bend of 90 degrees. Two rubber rings seal both sides. The adapter is especially well compatible with Bitspower's Crystal Link Tubes. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Black Angle: 90 ° Connections: 2x Ø 12 mm
The adapter in matt black from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Matt Black Connection: 12 mm (OD) Thread: G1/4" Thread Length: 5 mm
Water and electronics are not known to be compatible. To ensure that the separation between the two areas remains 100%, even with beloved water cooling, the sealing rings at the connections should be changed regularly. Although they have a long life, similar to vehicle tires, they lose their elasticity over time and become brittle. What leads to reduced grip on the road and provokes accidents in case of doubt, can also cause problems for the Wakü if a system becomes leaky. In addition to the contact of the water with the electronics, especially the sinking water pressure, the higher volume due to air inside the system and, in case of doubt, the total failure of the cooling are a considerable risk for the expensive hardware. With this set of many O-shaped sealing rings even extensive systems can be retreaded. The inner diameter requires use for G1 / 4 inch external thread. These are the most common thread standard, so that with few exceptions almost all screw threads can be sealed. Take care! Technical details:Material: rubberFor: G1 / 4 inch external threadContent: about 50 pieces
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a straight and black nickel plated G1 / 4 "fitting for 3/8" or 10mm ID tubing in Real Hi-Flow design. Since no union nut is used, any tube thickness and thus outer diameter can be used. To fix the hoses on the connection, we recommend a cable tie or a hose clamp as a precaution. Note: We recommend a 15mm spanner for installation and disassembly of the connection. Please note that even when using tools the connection may only be tightened hand-tight. You can find our tool here . Technical details:Material: brass, black nickel platedThread: G1 / 4 inchesSuitable for: 10 mm hose (inner diameter)
The adapter in the color shiny black from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Black Connection: 12 mm (OD) Thread: G1/4" Thread Length: 5 mm
The adapter in carbon black from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Carbon Black Connection: 12 mm (OD) Thread: G1/4" Thread Length: 5 mm
The plug in white from Bitspower, can be screwed into a G1/4" internal thread for a certain time or permanently, e.g. to close radiators or equalizing tanks. Technical Data: Material: Brass Colour: White Thread: G1/4" Thread Length: 5 mm
The adapter in matt black from Bitspower has a G1/4" external thread and a G1/4" internal thread. It has an angle of 90 degrees. Technical Data: Material: Brass Colour: Matt Black Angle: 90 ° Thread: G1/4" and inner G1/4" Thread Length : 5 mm
The nickel-plated adapter in the colour shiny silver from Bitspower has a G1/4" external thread and a G1/4" internal thread. It has a 90 degree angle and can be rotated on the thread for easier tube alignment. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Angle: 90 ° Thread: G1/4" and inner G1/4" Thread Length : 5 mm
The nickel-plated filler neck in the colour shiny silver from Bitspower is used when coolant is filled into the cooling circuit from the top of the housing. To do this, cut a small opening in the housing, place the connection through the hole or on the edge of the hole and screw it on from the other side with the screw ring. The filler neck can be connected to the cooling circuit via a normal G1/4" female thread connection. After filling, the upper side should be sealed with a sealing plug. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Thread: Inner G1/4" Thread Length: 15 mm
The adapter in carbon black from Bitspower has a G1/4" external thread and a G1/4" internal thread. It has an angle of 90 degrees. Technical Data: Material: Brass Colour: Carbon Black Angle: 90 ° Thread: G1/4" and inner G1/4" Thread : G1/4" Thread Length : 5 mm Thread : Inner G1/4" Thread Length : 6 mm
The nickel-plated extension of Bitspower in the colour shiny silver has a G1/4" internal thread and a G1/4" external thread. Without external thread, the extension extends the tubing of a water cooler by 1.5cm. Technical Data: Material: Nickel-Plated Brass Color: Shiny Silver Thread : G1/4" and Inner G1/4" Thread Length : 5 mm Application Length: 15 mm
The None Chamfer PETG Link Tube in transparent by Bitspower is made of polyethylene terephthalate, PETG for short. This material is a plastic and is used, for example, for PET bottles. Its strength lies in its high break resistance, easy heatability and high stability. In order to implement them in the system, it is necessary to bend them into shape with heat and cut them to size. As a rule, the None Chamfer does not need to be reworked when it is cut. The tube measures 100cm in length, 14mm in outer diameter and 11mm in inner diameter. Only the EML series from Bitspower is compatible as connections. Technical Data: Material: PETG Color: Transparent Outer Diameter: 14 mm Inner Diameter: 11 mm Length: 100 cm Compatibility: EML series Bitspower connectors only
The nickel-plated extension of Bitspower in the colour shiny black has a G1/4" internal thread and a G1/4" external thread. Without an external thread, the extension extends the tubing of a water cooler by 1.5 cm. Technical Data: Material: Nickel-Plated Brass Color: Shiny Black Thread : G1/4" and Inner G1/4" Thread Length : 5 mm Application Length: 15 mm
Tootekirjeldus inglise keeles:Create a swiveling 90 degree elbow bend using any Koolance G 1/4 BSPP (parallel) thread fitting. For a basic elbow fitting, the Koolance Coupling Adapter could also be used. Or for maximum adjustment, consider placing two swiveling elbow fittings together. Tube fitting not included.
Product kirjeldus: CORSAIR LL seeria LL120 RGB Dual Light Loop case fan Product Type: Case fan Packaged Quantity: 3 (spetsifikatsioons are for single item) Package Content: Mounting screws for case fans, Corsair Link Lighting Node PRO, RGB lighting hub värv: valge, sinine, kollane, punane, roheline, oranž, violett Fan Diameter: 120 mm Fan kõrgus: 25 mm Fan Bearing: Hydraulic bearing pöördekiirus: 360-2200 pööret minutis õhuvool: 63 cfm müratase: 36 dBA Power ühenduspesa: 4-pin fan connector Features: PWM control, RGB LED x16 mõõtmed (WxDxH): 12 cm x 2.5 cm x 12 cm kaal: 163 g Features: Corsair iCUE Manufacturer Warranty: 2-year garantii
The None Chamfer Brass Hard Tube in the color shiny black from Bitspower, is made of brass. With this durable tube, as well as the stylish color, high quality and unique water cooling can be created. As with other Hard Tubes, the tube can be cut or bent for the WaKü. The latter however with tube bending tool and for experienced hobbyists. As a rule, the None Chamfer does not need to be reworked when it is cut. The tube measures 300mm in length, 12mm in outer diameter and 10.6mm in inner diameter. It has a wall thickness of 0.7mm and is therefore very stable. C47, C48 and the ML series from Bitspower are compatible as connectors. Technical Data: Material: Brass Color: Shiny Black Material Thickness: 0.7 mm Outer Diameter: 12 mm Inner Diameter: 10,60 mm Length: 300 mm Compatibility: C47, C48 & ML series Bitspower connectors only
The None Chamfer PETG Link Tube in transparent by Bitspower is made of polyethylene terephthalate, PETG for short. This material is a plastic and is used, for example, for PET bottles. Its strength lies in its high break resistance, easy heatability and high stability. In order to implement them in the system, it is necessary to bend them into shape with heat and cut them to size. As a rule, the None Chamfer does not need to be reworked when it is cut. The tube measures 50cm in length, 14mm in outer diameter and 11mm in inner diameter. Only the EML series from Bitspower is compatible as connections. Technical Data: Material: PETG Color: Transparent Outer Diameter: 14 mm Inner Diameter: 11 mm Length: 50 cm Compatibility: EML series Bitspower connectors only
Tootekood: BP-NCCLT12AC-L1000GTIN: 4719552222933Jahutid ja lisad
Toote kirjeldus inglise keeles:With the Crystal Link Tubes, Waku specialist Bitspower presents a very interesting solution for water enthusiasts who are not completely unskilled in their craft. These are solid tubes of acrylic plastic, which can be cut by the user to the required length and bent with the aid of a heat source suitable. The resulting possible connection of the individual water cooling parts with longer dead straight sections and exactly curved radii is a visually appealing alternative to the traditional connection by means of hoses dar. For example, if you use a hot air gun and the acrylic tube heated with it for some time, the material is so soft that one It can easily bend into the desired radius and holds as long until the acrylic has cooled and the now bent tube hardens again. It does not get any more individual Everything you need can be created here and even adjusted later. Ideally, in addition to a hot air gun and gloves you have a silicone rod (or something similar flexible, but heat-resistant) to hand, which one pushes into the tube in advance, so that the soft tube gets no kink when bending. The transparent-blue Crystal Link Tube offered here has an outer diameter of 12 mm and an inner diameter of 10 mm. The length is 100 cm. It can be used in conjunction with bit-power adapter fittings from the C47, C48 and ML series. Technical details:Material: acrylic glass (PMMA)Colour blueOuter diameter: 12 mmInner diameter: 10 mmLength: 1,000 mmCompatibility: C47 Series Bit Power Fittings and Adapters C48 Bit Power Fittings and Adapters C48 Series Bit Power Fittings and Adapters
The None Chamfer PETG Link Tube in transparent by Bitspower is made of polyethylene terephthalate, PETG for short. This material is a plastic and is used, for example, for PET bottles. Its strength lies in its high break resistance, easy heatability and high stability. In order to implement them in the system, it is necessary to bend them into shape with heat and cut them to size. As a rule, the None Chamfer does not need to be reworked when it is cut. The tube measures 50cm in length, 12mm in outer diameter and 10mm in inner diameter. Only the EML series from Bitspower is compatible as connections. Technical Data: Material: PETG Color: Transparent Outer Diameter: 12 mm Inner Diameter: 10 mm Length: 50 cm Compatibility: EML series Bitspower connectors only
Plug for connecting cables to the potential-free switching contact (relay) of the aquaero. The plug can be attached to a cable using screw terminals and is then plugged into the appropriate plug on the aquaero. Two-pole design. Please note the maximum load capacity of the relay output of the aquaero! Max. 1A, max 12V!
Internal USB connection cable to connect an Aqua Computer USB device with miniature connector (for example VISION) to a free USB port (pin header) of the mainboard. Length approx. 100 cm. Scope of delivery: One cable
RGB LED ring for reservoirs, inner diameter 60 mm, proprietary 4-pin connector for RGBpx components from Aquacomputer, compatible with D5 NEXT and QUADRO, Attention: This LED ring works exclusively with RGBpx components from Aquacomputer
