The transparent lid made of matt acrylic fits all Protium reservoirs from Singularity. It has four G1/4" connections and, due to its design, can be integrated into the water cooling circuit in a variety of ways. Technical Data Colour: Transparent Material: Acryl (matt) Thread: 4x G1/4" Compatibility: Protium reservoir
Vernickelter Kombi-Wasserkühler (CPU & VRAM), für das MSI MPG Z590 Carbon Gaming, mit adressierbarer D-RGB-Beleuchtung, mit Velocity-Engine für optimierten Durchfluss
Full-Cover-Waterblock von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung
The next generation - the Alphacool Eisblock Aurora water cooler for Geforce RTX 4XXX graphics cards. In order to dissipate the enormous heat of this graphics card generation in the best possible way, numerous optimizations have been made to the water cooler compared to the previous model. The fin structure was adapted and enables a very good water flow while increasing the cooling surface. The modified jet plate with improved inflow engine ensures an optimal distribution of the water on the cooling fins. Technical Highlights The fin structure of this Eisblock cooler generation was developed together with Nvidia board partners. The fin thickness is 0.4 mm, the distance between the cooling fins is 0.4 mm. This ensures a very good water flow while increasing the cooling surface. The jet plate has a revised inlay that spreads the water pressure better over the fins thus optimizing the heat absorption. The adjusted water inflow gives the water a better angle of inflow. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Design The Aurora design of the Geforce RTX 4XXX Eisblock generation is visually calmer and simpler. Only one O-ring runs around the entire cooler. The design around the cooling fins and jetplate makes for a cleaner look. The illumination of the digitally addressable RGB LEDs is even better distributed throughout the cooler as a result of the chrome plating. The terminal's design is in line with the classic Aurora design. Thermal paste & thermal pads The included thermal compound is Alphacool's Subzero. With a thermal conductivity of 16 W/mK, it is one of the highest performing thermal pastes on the market. The electrically non-conductive thermal compund is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850.000 TF. Alphacool Soft Pads with 1mm thickness are used on the voltage converter and the graphics memory. The thermal conductivity of the pads is 7 W/mK. The pads for the back of the PCB are 3mm thick and have a thermal conductivity of 3 W/mK. Compatibility: - Nvidia Geforce RTX 4080 Reference Design - INNO3D GeForce RTX 4080 X3 OC, 16GB GDDR6X, HDMI, 3x DP - INNO3D GeForce RTX 4080 X3, 16GB GDDR6X, HDMI, 3x DP - PNY GeForce RTX 4080 16GB XLR8 Gaming Verto Epic-X RGB Overclocked Triple Fan, 16GB GDDR6X, HDMI, 3x DP (VCG408016TFXXPB1-O) (*) - PNY GeForce RTX 4080 16GB XLR8 Gaming Verto Epic-X RGB Triple Fan, 16GB GDDR6X, HDMI, 3x DP (VCG408016TFXXPB1) (*) - PNY GeForce RTX 4080 16GB Verto Triple Fan, 16GB GDDR6X, HDMI, 3x DP (VCG408016TFXPB1) (*) (* The cooler is compatible with the GPU, but the rear part of the PCB is not covered. This has no negative effect on the cooling performance!) Technical data cooler L x W x H 198,41 x 144,69 x 34,40mm Material cooler chrome-plated copper Material cooler top acrylic Threads 4 x G1/4" Thickness cooling fins 0,4mm Distance cooling fins 0,4mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 12 Technical data backplate L x W x H 198,41 x 120,19 x 6mm Material aluminium Color black
The SilverStone Nitrogon is a low-profile CPU cooler designed specifically for Intel LGA 1700 sockets, featuring a compact and versatile top-down design. With a minimal height of just 45mm, it is perfect for slim and small form factor systems. The cooler includes a 92mm fan for efficient cooling performance. Its dimensions are 10.5cm in width, 9.7cm in height, and 10.6cm in length, and it weighs 290 grams. For more details, visit the SilverStone website.
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:This fitting can be used to connect 16/10mm tubing with a G1/4“ connection thread. The fitting is angled by 45° and is revolvable, allowing easy hose routing in the system. Technical specifications: Material: Brass, chromatizedColour: Deep Black Dimensions:Length: 50,2mmWidth: D22,1mmHeight: 25mm Hose size compatibility : 16/10mm Extent of delivery:1 x Alphacool HF Screw connector 45° G1/4 outer thread on 16/10 revolvable - Deep Black Reviews:Xtremesystems.comPT-Reviews.pt
Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Model: 90° compression fitting 13mmThis fitting has a 1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 13mm acrylic or brass tube. This fitting is bent 90° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical Specifications Material: brass Colour: chrome Dimensions Length: 42.5mm Width: 21mm Scope of Delivery 1x Alphacool Eiszapfen 13mm HardTube compression fitting 90° rotatable G1/4 for plexi- brass tubes - chrome Fitting MapYou can find an interactive map of all Alphacool fittings here.
Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Model: 90° compression fitting 13mmThis fitting has a 1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 13mm acrylic or brass tube. This fitting is bent 90° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical Specifications Material: brass Colour: deep black Dimensions Length: 42.5mm Width: 21mm Scope of Delivery 1x Alphacool Eiszapfen 13mm HardTube compression fitting 90° rotatable G1/4 for plexi- brass tubes - deep black Fitting MapYou can find an interactive map of all Alphacool fittings here.
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:A bushing with two 1/4" inner threads is especially interesting when planning on extending fittings or to connect other components with an outer thread to a fitting. This bushing is extremely handy thanks to its 90° kink. Technical specifications:Material: Brass, chromatizedColour: Deep Black Dimensions:Length: 23mmWidth: D18mmHeight: 23mm Extent of delivery:1 x Alphacool HF L-connector 2x G1/4" inner thread - deep black Dieses Produkt wurde für Sie getestet:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Version This 45° angled adapter has a G1/4" female thread on both sides. This 45° angled connection is used in water circuits where there is limited space for tubing and a special solution is needed. Technical data L x W x H 21 x 20 x 21mm Material brass Angle 45° Thread depth/height 5mm Threads 2x G1/4" inner thread Weight 17g Color black
Our trusted fittings are available in a whole new design! Robust high-quality angled hose connector.The hose is fixated by a union nut to ensure a tight and quick seal which can be released which can also easily be removed with one hand. This system ensures maximum safety and ease of installation. Technical details:Material: Brass, black nickel coatedHose size: 10mm inner diameter, 13mm outer diameterKey width: 18mmKey diagonal width: 19,5mm Extent of delivery:Black nickel hose conector with union nuts Hier ein Eindruck wie die schwarzen Anschlüsse verbaut aussehen
The Alphacool Apex aluminium backplate is specially designed for the Intel LGA Socket 1700 to optimise the cooling performance of the Alphacool Eisbaer AIOs and XPX coolers. The backplate replaces the standard Intel CPU mount on the back of the motherboard and prevents the LGA 1700 socket from bending when mounting the cooler. This serves to protect the mainboard and enables an even and perfect contact pressure for all Alphacool XPX CPU water coolers, Eisbaer AIOs and their Solo variants. All in all, this leads to a significant improvement in cooling performance.Compatibility:- Alphacool Eisbaer (Solo & AIO)- Alphacool Eisbaer Aurora (Solo & AIO)- Alphacool Eisbaer LT (Solo & AIO)- Alphacool Eisbaer LT Aurora (Solo & AIO)- Alphacool Eisbaer Pro (Solo & AIO)- Alphacool Eisblock XPX- Alphacool Eisblock XPX 1U- Alphacool Eisblock XPX Pro 1U- Alphacool Eisblock XPX Aurora- Alphacool Eisblock XPX Aurora Edge- Alphacool Eisblock XPX Aurora Pro- Alphacool Eisblock XPX Pro Aurora Light Technical data L x W x H 86 x 86 x 5 mm Material aluminium Weight 67 g Color black
The decoupling set has been specially designed for the aquastream ULTIMATE and aquastream XT series and prevents vibrations from reaching the computer casing. Furthermore, the aquainlet series has been designed for use with equalizing tanks, which change the weight or weight distribution. Scope of Delivery: Mounting plate (stainless steel) Three special buffers Ten M3x6 screws Two M3x8 screws Two M3 washers Two M4x8 screws Two M4 washers Two M4 hex nuts
The XSPC Photon is the ultimate tube reservoir for PC water cooling. The tube is made from a quality toughened glass, which is both crystal clear and highly resistant to staining. The aRGB lighting is now at the back of the reservoir and features a diffuser strip for a more professional look to your build. Unlike other tube reservoirs, which use cheap plastic brackets, the XSPC Photon has high quality CNC cut aluminium bracket. The bracket connects to both ends of the reservoir, which give a solid hold without blocking the view of the tube. Photon reservoirs can be mounted either horizontally or vertically. If using the Photon horizontally, make sure to keep the reservoir topped up to the top, or air can get sucked into the loop. Each reservoir is hand assembled and pressure tested before sale to ensure reliability. V3 Photon reservoirs include a new bracket which attaches directly to 120mm and 140mm radiators. It also has an improved fillport with lower restriction, to make filling the reservoir easier. Details: Tube Material: Glass Cap Material: Acetal Bracket Material: Aluminium Dimensions: 179 x 72 x 86mm Capacity: 410ml Lighting: 10x Individual aRGB bulbs Ports: 3x G1/4" (2x In, 1x Out) Individually Pressure Tested RGB Compatibility: All 3Pin 5v Addressable RGB Motherboards, Controllers and Hubs including... Asus AURA Sync (3Pin 5v Headers only) Gigabyte RGB Fusion (3Pin 5v Headers only) MSI Mystic Light Sync (3Pin 5v Headers only) NOTE: Do not attempt to plug the 3Pin 5V aRGB cable into anything other than an aRGB 5V Motherboard header pin, Controller or Hub. Each aRGB strip is tested prior to shipping, user damage by misuse is not covered under warranty. Included: XSPC Photon V3 aRGB Glass Reservoir Integrated aRGB diffused lighting Mounting Bracket (Matte Black) G1/4" Blank Plug (Matte Black) M20 Fill Cap (Matte Black)
The D-Plug from Alphacool's ENTERPRISE SOLUTIONS series with 2 G1/4" male threads offers the possibility to connect components like GPU and CPU coolers or radiators within a water circuit. What's New?Compared to double nipples or similar adapters, the ES D-Plug is plugged and not screwed. The necessary stability is provided by two closely fitting O-rings on the Male component of the connector. Of course, the connector has been extensively tested in the Alphacool lab with the result that the D-Plug is stable up to 1.5 Bar. UsesAlphacool's ES D-Plug allows for easy connection of water cooling components such as graphics card and CPU coolers or radiators to each other. Since the connector is only plugged in and not screwed, easy installation or quick replacement are uncomplicated. The ES D-Plug has a variable length. By pulling the connector apart, an extension of up to 15 mm can be achieved. This flexibility allows compensation for inaccuracies in the system design and prevents hoses from twisting during assembly. With the use of the D-Plug, the connection of water cooling elements is possible even in the tightest spaces.The right size for every applicationThe ES D-Plug is available in lengths of 20 mm, 25.5 mm and 31.5 mm. They come in multiple colors such as brilliant chrome or matte black. Replacement O-rings in three different colors are included.Application notesTo ensure the required stability and tightness of the connection, both O-rings of the Male component must be fully recessed in the Female component. Technical dataMaterialBrassColorChromeLength25,5 mmDiameter20 mmThreadG1/4“ OTThread length (incl. O-ring)5 mmWeight44 gPressure tested1,5 Bar
Full-Cover-Waterblock von EK Water Blocks, für NVIDIA RTX A5500 Rack, vernickelter Kupferboden, schlichter Deckel, für Workstations und Server konzipiert
The D-Plug from Alphacool's ENTERPRISE SOLUTIONS series with 2 G1/4" male threads offers the possibility to connect components like GPU and CPU coolers or radiators within a water circuit. What's New?Compared to double nipples or similar adapters, the ES D-Plug is plugged and not screwed. The necessary stability is provided by two closely fitting O-rings on the Male component of the connector. Of course, the connector has been extensively tested in the Alphacool lab with the result that the D-Plug is stable up to 1.5 Bar. UsesAlphacool's ES D-Plug allows for easy connection of water cooling components such as graphics card and CPU coolers or radiators to each other. Since the connector is only plugged in and not screwed, easy installation or quick replacement are uncomplicated. The ES D-Plug has a variable length. By pulling the connector apart, an extension of up to 15 mm can be achieved. This flexibility allows compensation for inaccuracies in the system design and prevents hoses from twisting during assembly. With the use of the D-Plug, the connection of water cooling elements is possible even in the tightest spaces.The right size for every applicationThe ES D-Plug is available in lengths of 20 mm, 25.5 mm and 31.5 mm. They come in multiple colors such as brilliant chrome or matte black. Replacement O-rings in three different colors are included.Application notesTo ensure the required stability and tightness of the connection, both O-rings of the Male component must be fully recessed in the Female component. Technical dataMaterialBrassColorChromeLength31,5 mmDiameter20 mmThreadG1/4“ OTThread length (incl. O-ring)5 mmWeight55 gPressure tested1,5 Bar
GPU-Wasserkühler im Full-Block-Design, für verschiedene RTX-Grafikkarten von NVIDIA, vernickelter Kupferblock mit Acrylglas-Deckel, integrierte A-RGB-Beleuchtung
