Firma: Arvutitark OÜ

Technical Data: Material: Nickel-Plated Brass Colour: Black Supported Tube: 16/12 mm Thread: G1/4", male Thread Length: 4,5 mm Outer Diameter (Fitting): 23 mm Installed Height: 19 mm Compatible Soft Tubing: PVC, EPDM, Norprene, Silicone and most other flexible tubes

Technical Data: Material: Nickel-Plated Brass Colour: Silver Nickel Supported Tube: 16/12 mm Thread: G1/4", male Thread Length: 4,5 mm Outer Diameter (Fitting): 23 mm Installed Height: 19 mm Compatible Soft Tubing: PVC, EPDM, Norprene, Silicone and most other flexible tubes

EK-Quantum Kinetic TBE D5 combo unit is the revolution of the most popular pump-reservoir assembly design on the market. The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine D5 pump! The reservoir is equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops. The top features three G1/4" ports, one of which has a pre-installed nickel-plated brass internal tube which helps to prevent the splashing of the coolant inside the reservoir if the top is to be used as an inlet. This reduces the chances of air being sucked in by the pump and foaming of the coolant as well. Any of these ports can also use used for filling the system or adding additional accessories (thermal probes, LEDs, etc.) Another three industry-standard G1/4" ports are available in the bottom combo housing. The upgrade compared to the previous combo unit is the 3rd available side port usable as either an optional inlet or a drain port. A special rubber shock absorber is used to de-couple the main pump body from the mounting clip for silent operation, free of vibration-induced noise. Additionally, horizontal and vertical positioning is supported for easier tube routing possibilities. The 60mm diameter tube is made of high-quality acrylic material, while the reservoir bottom/pump top is CNC machined black POM acetal. The sealing is performed by a quality EPDM o-ring. The integrated addressable D-RGB is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB header. This reservoir can be easily upgraded with longer acrylic tubes used by EK-RES X3 series reservoirs. Pump electrical and mechanical properties: - Motor: Electronically commuted spherical motor - Rated voltage: 12V DC - Power consumption: 23W - Maximum pressure head: 3.9m - Maximum flow: 1500L/h - Maximum system temperature: 60°C - Materials: Stainless steel, PPS-GF40, EPDM O-rings, hard coal - Power connector: 4-Pin Molex- and 4-Pin PWM FAN connector Technical specifications: - Reservoir diameter 60mm - Reservoir free volume: 205mL - Overall unit height: 200mm - Mounting hole pattern: 65x34mm - D-RGB connector standard 3-pin (5+, Digital, Blocked, Ground) Operational regime: - PWM duty cycle: ~ 20-100% - Default behavior: Runs at 100% duty cycle when no PWM feedback signal is present Enclosed: - EK-Quantum Kinetic TBE 200 D5 PWM D-RGB - Mounting clip with rubber insert - Self-adhesive mounting hole pattern sticker - Mounting mechanism (incl. required Allen keys) - Installation manual Made in Slovenia - EU! Pump motor made in Hungary - EU!

Robust high-quality compression fitting with a cylindrical thread (1/4"). The hose is fixated by the union nut, immediately creating a safe seal, yet still allowing the union nut to be removed with one hand. The fitting is angled by 90° and can be rotated freely (by 360°). Ideal for systems with high flow rates and little space, such as Chipset cooling, graphics card cooling or DIY projects. This system ensures maximum safety and easy installation. Technical specifications: Material: Brass (matte black) Dimensions: 35,1x35,2x23,1mm Thread length: 5mm Compatibility: The 16/10mm fittings are compatible with 16/10mm and 15.9/9.5mm tubing Extent of delivery: 1x 16/10mm compression fitting 90° G1/4" revolvable - knurled - matte black

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Straight Socket 13/10mmThis connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose. Sixpack:Since six connectors of one type are frequently required, Alphacool now offers sixpacks. This has many advantages to your benefit! Technical Specifications: Material: Brass Colour: Chrome Dimensions: Diameter: 20mm Height: 27mm Scope of Delivery: 1x Alphacool Eiszapfen 13/10mm compression fitting G1/4 - Chrome sixpack

Sehr effektives Biozid, besonders langlebig, schützt vor Bakterien- und Algenbildung, 30 ml Konzentrat zum selber mischen, für insgesamt 5 Liter Flüssigkeit

The fitting from Nanoxia in the colour black, has an angle of 45 degrees and two G1/4" female threads. Technical Data: Color: Black Angle: 45° Length: 22 mm Diameter: 18 mm Thread: Inner G1/4" Thread Length: 5 mm

The fitting from Nanoxia in the colour black, serves as straight connector for hard tubes. Technical Data: Color: Black Diameter: 20 mm Length: 17,2 mm Connections: 2x 12 mm Ø

EK-Quantum Vector RTX 3080/3090 Backplate - Black is a CNC-milled backplate made of black anodised aluminium that fits all EK-Quantum Vector RTX 3080/3090 water blocks. The backplate covers the full length of the graphics card PCB, serves as an aesthetic addition and also provides passive cooling for the back of the voltage regulator module (VRM), the GPU core and the VRAM on the 3090 cards. Enclosed: EK-Quantum Vector RTX 3080/3090 rear panel - Black Assembly mechanism Thermal pads

EK-Quantum Vector Strix RTX 3080/3090 Backplate - Black is a CNC-milled backplate made of black anodised aluminium that fits all EK-Quantum Vector Strix RTX 3080/3090 water blocks. The backplate covers the full length of the graphics card PCB, serves as an aesthetic addition and also provides passive cooling for the back of the voltage regulator module (VRM), the GPU core and the VRAM on the 3090 cards. Enclosed: EK-Quantum Vector Strix RTX 3070/3080/3090 back plate - Black Assembly mechanism Thermal pads

With Alphacool Eiswasser, water cooling pioneer Alphacool is checking off every modder and enthusiast’s wish list: brilliant colours, cool effects in plexi coolers, tubing and reservoirs, as well as a long lifespan and material compatibility. The Alphacool Eiswasser Crystal Series has been tested in every possible application both in Alphacool’s lab and by external testers and modders, and was proven to be high-quality and long-lasting.If you’re looking to add some illumination to your PC, the Alphacool Eiswasser Crystal UV is for you. It has excellent UV-reactivity with UV-LEDs or cathodes.Alphacool Eiswasser gives your water cooling system an extra visual highlight with great cooling performance.Note: This cooling liquid does not contain any biocides or anti-corrosion additives. It should also be noted that the loop must be cleaned more frequently when using this colored liquid. The dyes it contains can clog the circuit after a long period of use and impair cooling performance. Alphacool's Eiswasser series is therefore more suitable for use in show cases than in gaming or work PCs. Technical dataUV inkNot UV activeContent1000mlSpecificationReady mixColoryellowManufacturerAlphacool

With Alphacool Eiswasser, water cooling pioneer Alphacool is checking off every modder and enthusiast’s wish list: brilliant colours, cool effects in plexi coolers, tubing and reservoirs, as well as a long lifespan and material compatibility. The Alphacool Eiswasser Crystal Series has been tested in every possible application both in Alphacool’s lab and by external testers and modders, and was proven to be high-quality and long-lasting.If you’re looking to add some illumination to your PC, the Alphacool Eiswasser Crystal UV is for you. It has excellent UV-reactivity with UV-LEDs or cathodes.Alphacool Eiswasser gives your water cooling system an extra visual highlight with great cooling performance.Note: This cooling liquid does not contain any biocides or anti-corrosion additives. It should also be noted that the loop must be cleaned more frequently when using this colored liquid. The dyes it contains can clog the circuit after a long period of use and impair cooling performance. Alphacool's Eiswasser series is therefore more suitable for use in show cases than in gaming or work PCs. Technical dataUV inkNot UV activeContent1000mlSpecificationReady mixColorgreenManufacturerAlphacool

The EK-Quantum Vector FE RTX 3070 backplate is designed for the EK-Quantum Vector RTX FE 3070 graphics card cooler of the same name. A backplate is particularly suitable for giving the graphics card more stability. Since the backplate is kept very simple, it is rounded off by a small but elegant EK logo. Technical Data Material: Nickel-Plated Aluminium Color: Nickel Scope of Delivery EK-Quantum Vector FE RTX 3070 Backplate - Nickel Mounting mechanism (the backplate screws are on the other side - separate compartment) Thermal pads

The EK Water Blocks EK-Quantum Vector Trio RTX 3080/3090 Backplate - Nickel Backplate is made of aluminum. This ensures improved cooling. Technical specifications: Material: aluminum Silver Weight: Dimensions: 307.62 x 128 x 5.2mm Scope of delivery: EK Water Blocks EK-Quantum Vector Trio RTX 3080/3090 Backplate - Nickel

The EK Water Blocks EK-Quantum Vector Trio RTX 3080/3090 Backplate - Black Backplate is made of aluminum. This ensures improved cooling. Technical specifications: Material: aluminum Color: Black Weight: Dimensions: 307.62 x 128 x 5.2mm Scope of delivery: EK Water Blocks EK-Quantum Vector Trio RTX 3080/3090 Backplate - Black

Alphacool's new power pump series, exceptional performance at an unbeatable price. The 12V pumps can simply be connected directly to the system PSU and the pump will start with your PC for maximum convenience and safety.This pump is ideal for PC and other electronics water cooling. The DC pump is equipped with an electronically commutated spherical motor. In a pump with a spherical motor the only moving part is a spherically shaped rotor which in this pump is held in place by a bearing ball made of ultra-hard and wear-resistant ceramic. The spherical bearing of the rotor offers many advantages: For example an increase of bearing play is impossible due to the design, allowing the pump to run quietly and smoothly over its whole lifespan. A separate magnetic shielding of the pump is not needed.The ball motor design allows efficient operation of the pump in combination with excellent performance. The pump can simply be connected to a 12V Molex connector of the system PSU.The special feature of this model is the fact that only the pump core itself is shipped. Why pay more for all the things you won't need when using this pump with a third-party pump top? Note on applicationPlease use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well. Technical dataManufacturerAlphacoolColorblackVoltage12V DCMaximum delivery headGood (2 to 4m)Maximum system temperature60°CWater inletnot availableWater outletnot availableMaximum flow rate1500 l/hPossible control range8-24V DCApproved liquidsWater/glycol mixturePower consumption30WDimensions70 x 72 x 82mmPower connection4Pin PWMMaterialCeramic, plastic

The connection of EK Water Blocks is for 16/10mm hoses, consists of nickel-plated brass and serves as a compression fitting. It is in the colour silver and comes from the Torque series, which convinces with a simple and timeless design. Originally intended for the EKWB Quantum series, this fitting is also compatible with other EK products. In this fitting, the union nut serves as a compression ring, which presses the sealing ring onto the hose. As a small feature, the union nut has a recess under which coloured rings are placed, which provide a bit of individuality and are available separately. Technical Data: Material: Nickel-Plated Brass Colour: Silver Nickel Supported Tube: 16/10 mm Thread: G1/4", male Thread Length: 4,5 mm Outer Diameter (Fitting): 23 mm Installed Height: 19 mm Compatible Soft Tubing: PVC, EPDM, Norprene, Silicone and most other flexible tubes

The EK-Quantum Vector RX 6800/6900 GPU cooler, has been further developed based on the 2nd generation Vector series and is compatible with most reference designs of RX 6800, RX 6800XT and RX 6900 graphics cards. The Vector RE water block directly cools the GPU, the VRAM and the VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The base of the block is made of copper, while the top is made entirely of black durable POM acetal. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate. Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 283 x 139 x 16.5mm (L x H x W) Material: Copper, Acetal Threads: G1/4" Scope of Delivery: EK-Quantum Vector RX 6800/6900 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility AMD Radeon RX 6800 AMD Radeon RX 6800 XT AMD Radeon RX 6900 XT ASROCK Radeon RX 6800 16GB (visual) ASROCK Radeon RX 6900 XT 16GB (visual) ASUS Radeon RX 6800 XT 16GB(visual) ASUS Radeon RX 6800, RX6800-16G, 16GB GDDR6 (90YV0FY0-U0NA00) (visual) ASUS Radeon RX 6900 XT 16GB (RX6900XT-16G) (visual) BIOSTAR Radeon RX 6900 XT 16GB (visual) GIGABYTE Radeon RX 6800 16GB (visual) GIGABYTE Radeon RX 6800 XT 16GB (visual) Gigabyte Radeon RX 6900 XT, 16GB GDDR6, HDMI, 2x DP, USB-C (GV-R69XT-16GC-B) (visual) MSI Radeon RX 6800 16GB (visual) MSI Radeon RX 6800 XT 16GB (visual) MSI Radeon RX 6900 XT 16GB (visual) POWERCOLOR Radeon RX 6900 XT 16GB (visual) SAPPHIRE Radeon RX 6800 16GB (visual) SAPPHIRE Radeon RX 6900 XT 16GB (21308-01-20G) (visual) SAPPHIRE RX 6800 XT 16GB (visual)

EK-Quantum Momentum ROG Rampage VI Encore D-RGB is the new Quantum Line monoblock specifically engineered for the ROG Rampage VI Extreme Encore motherboard. Featuring the latest cooling engine with low restriction and high performance. The monoblock is equipped with a 3-pin D-RGB (addressable) LED strip and it offers unparalleled aesthetical customization alongside superior performance! The D-RGB LED in the monoblock is compatible with ASUS® Aura Sync which offers a fully addressable customization experience! EK® Momentum series monoblocks utilize the 5th generation of the award-winning EK® CPU water block cooling engine, further tweaked for performance and optimal coolant flow! It directly cools the Intel® Socket 2066 type CPU, as well as the power regulation (MOSFET) module providing the enthusiasts with a great solution for high and stable overclocks. Like with every EK monoblock, the EK-Quantum Momentum ROG Rampage VI Encore features a high flow design and it can be easily used with the system using weaker water pump or lower pump speed settings as well. Using a monoblock gets rid of the two small fans that can be found on this X299 motherboard, hidden under the VRM heatsink grill. The purest nickel-plated copper available on the market is used for the cold plate which is precisely machined to a dense micro-fin structure. The nickel-plated brass screw-in standoffs are pre-installed and allow for easy installation. Top of the monoblock features a CNC machined cast acrylic top piece. The new cooling engine is characterized by the top-integrated jet nozzle which is combined with a thicker jet plate allowing a more precise bow control. The simplified water block structure offers a more optimized coolant flow and easier maintenance, while the jet plate ensures the best contact surface for the CPU. The monoblock is delivered with a CNC machined, black anodized aluminum piece that acts as a heatsink for critical components under the I/O cover, such as the network chip, and at the same time, it is the mount for the factory I/O cover, that embodies the small OLED screen. Unlike other solution on the market, this is a true one-piece, sturdy and reliable liquid cooling product which requires only two connector fittings for proper operation. The enclosed thermal pad is used on voltage regulator modules to improve stability, performance and prolongs the lifespan of the motherboard. For the CPU, please use the enclosed (electrically non-conductive) thermal grease EK-TIM Ectotherm. The block is already equipped with 3-pin 5V Addressable D-RGB LED strip which is compatible with the motherboard 3-pin 5V Addressable D-RGB LED header. This product is also compatible with popular RGB sync technologies from all major motherboard manufacturers which support the pinout: +5V, D, Blocked, Ground. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the addressable gen2 LED header (ADD GEN2_1 and ADD GEN2_2 marked headers). Technical specifications: - RGB connector 3-pin 5V digital LED header (Pinout: +5V, D, blocked, G) Enclosed: - EK-Quantum Momentum ROG Rampage VI Encore Monoblock - I/O heatsink - Mounting mechanism - Thermal grease EK-TIM Ectotherm - Thermal pads Made in Slovenia - Europe!

The EK-Quantum Vector RX 6800/6900 GPU cooler, has been further developed based on the 2nd generation Vector series and is compatible with most reference designs of RX 6800, RX 6800XT and RX 6900 graphics cards. The Vector RE water block directly cools the GPU, the VRAM and the VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The base of the block is made of nickel-plated copper, while the top is made entirely of black durable POM acetal. The end piece of the cooler has D-RGB lighting, with a total of 6 individually addressable LEDs, which makes the end piece shine pleasantly. The lighting is compatible with all common RGB Sync technologies of the major motherboard manufacturers, such as ASRock Polychrome Sync, ASUS Aura Sync, Gigabyte RGB Fusion and MSI Mystic Light. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate. Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 283 x 139 x 16.5mm (L x H x W) Material: Nickel-Plated Copper, Acetal Threads: G1/4" Scope of Delivery: EK-Quantum Vector RX 6800/6900 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility AMD Radeon RX 6800 AMD Radeon RX 6800 XT AMD Radeon RX 6900 XT ASROCK Radeon RX 6800 16GB (visual) ASROCK Radeon RX 6900 XT 16GB (visual) ASUS Radeon RX 6800 XT 16GB(visual) ASUS Radeon RX 6800, RX6800-16G, 16GB GDDR6 (90YV0FY0-U0NA00) (visual) ASUS Radeon RX 6900 XT 16GB (RX6900XT-16G) (visual) BIOSTAR Radeon RX 6900 XT 16GB (visual) GIGABYTE Radeon RX 6800 16GB (visual) GIGABYTE Radeon RX 6800 XT 16GB (visual) Gigabyte Radeon RX 6900 XT, 16GB GDDR6, HDMI, 2x DP, USB-C (GV-R69XT-16GC-B) (visual) MSI Radeon RX 6800 16GB (visual) MSI Radeon RX 6800 XT 16GB (visual) MSI Radeon RX 6900 XT 16GB (visual) POWERCOLOR Radeon RX 6900 XT 16GB (visual) SAPPHIRE Radeon RX 6800 16GB (visual) SAPPHIRE Radeon RX 6900 XT 16GB (21308-01-20G) (visual) SAPPHIRE RX 6800 XT 16GB (visual)

This pump is the first in the world to be used in mass-produced water-cooled workstations and is ideal for cooling processors and electronic components. Thanks to its compact size and power, it can be used for many applications. This DC pump features an electronically commutated ball motor with an estimated lifespan of over 50,000 hours at 12V. The only moving part in the pump is the spherically shaped rotor unit, which sits on an ultra-hard, wear-resistant ceramic bearing ball. Traditional shafts with bearings and seals are not used or needed. The spherical bearing of the rotor unit on the ceramic bearing ball offers several advantages: the development of bearing clearance is technically impossible, which ensures that the noise level will not increase over the pump's lifespan. The bearing is self-adjusting, which means the pump remains consistently quiet throughout its life. The pump is directly lubricated by the coolant (wet-running pump), so no maintenance is necessary. Since the rotor is magnetically held in place, even small dirt particles will not affect the mechanism, and the pump cannot be blocked under normal operating conditions. Reliable operation is guaranteed even after long periods of inactivity. The permanently magnetic rotor unit is driven frictionlessly by a magnetic field produced by the surrounding stator. The stator is built completely around the rotor, so the pump, at 38mm, is only slightly taller than the stator unit. This allows it to fit into almost any PC case—be it a super tower or a barebone. Separate magnetic shielding is usually unnecessary. The ball motor design allows for powerful yet energy-saving operation. The pump’s output can be adjusted across a wide range by varying the DC operating voltage. All components in contact with the coolant are completely corrosion-resistant. Pump tachometer: Features a 3-pin Molex connector as a pump tach output (for mainboards or control units). Why are there Swiftech and Laing versions? Are they different? The answer is simple: No! Here’s why: Laing manufactures all pumps in Hungary; they are just labeled differently for overseas and European markets. The pumps themselves are exactly the same. The overseas version is distributed by Swiftech and the European one is neutrally black. Swiftech pumps are usually shipped with decouplers, while Laing pumps usually are not. The power, pressure head, and flow rates, etc., are all identical. Important: The electronics of the Laing pump are not waterproof. Please ensure the electronic components do not come into contact with water during installation or maintenance. When replacing the top, always ensure the O-ring seal is properly fitted and avoid spills when filling the Laing reservoir. Laing does not cover damages caused by water in the electronic components! Technical data Dimensions (L x W x H): 92 x 70 x 40mm Material: Stainless steel 1.4571, PPS-GF40, EPDM O-rings, aluminum oxide, carbon Threads: 2x 3/8" barbed fittings Max speed: 4,500 rpm Max power consumption: 15.6 W Voltage: 12V DC Power connector: 3-Pin Molex PWM control: n/a Max ambient temperature: 10°C - 50°C Max water temperature: 10°C - 60°C Max pump head: 4.28m Max flow: 510 L/h Max pump pressure: 1.5 bar Weight: 203g Color: black

The EK-Quantum Vector RX 6800/6900 GPU cooler, has been further developed based on the 2nd generation Vector series and is compatible with most reference designs of RX 6800, RX 6800XT and RX 6900 graphics cards. The Vector RE water block directly cools the GPU, the VRAM and the VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The base of the block is made of copper, while the top is acrylic. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate. Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 283 x 139 x 16.5mm (L x H x W) Material: Copper, Acryl Threads: G1/4" Scope of Delivery: EK-Quantum Vector RX 6800/6900 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility AMD Radeon RX 6800 AMD Radeon RX 6800 XT AMD Radeon RX 6900 XT ASROCK Radeon RX 6800 16GB (visual) ASROCK Radeon RX 6900 XT 16GB (visual) ASUS Radeon RX 6800 XT 16GB(visual) ASUS Radeon RX 6800, RX6800-16G, 16GB GDDR6 (90YV0FY0-U0NA00) (visual) ASUS Radeon RX 6900 XT 16GB (RX6900XT-16G) (visual) BIOSTAR Radeon RX 6900 XT 16GB (visual) GIGABYTE Radeon RX 6800 16GB (visual) GIGABYTE Radeon RX 6800 XT 16GB (visual) Gigabyte Radeon RX 6900 XT, 16GB GDDR6, HDMI, 2x DP, USB-C (GV-R69XT-16GC-B) (visual) MSI Radeon RX 6800 16GB (visual) MSI Radeon RX 6800 XT 16GB (visual) MSI Radeon RX 6900 XT 16GB (visual) POWERCOLOR Radeon RX 6900 XT 16GB (visual) SAPPHIRE Radeon RX 6800 16GB (visual) SAPPHIRE Radeon RX 6900 XT 16GB (21308-01-20G) (visual) SAPPHIRE RX 6800 XT 16GB (visual)

EK-Quantum Vector Strix RTX 3070 D-RGB from EK is a complete cooler for the ROG Strix RTX 3070 from ASUS. The high-quality workmanship and the nickel-plated copper material used for the heat sink are striking. The nickel-plated copper covers all important areas of the graphics card, such as GPU, memory and voltage converter. The optimised channel structure results in very efficient and reliable cooling. Visually, the cooler is rounded off with a transparent acrylic glass lid and a black end piece. The integrated RGB lighting sets the scene perfectly for the EK Quantum. In addition, the cooler has four G1/4" connections. The graphics card cooler is compatible with the common RGB synchronisation technologies of all major mainboard manufacturers. Technical Data Dimensions: 293 x 154 x 16,5 mm Material Base: Nickel-Plated Copper Material Cover: Acryl Thread: 4x G1/4" D-RGB cable length: 500mm D-RGB LED count: 6 D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) Compatibility ASUS ROG Strix RTX 3070 Scope of Delivery EK-Quantum Vector Strix RTX 3070 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)

With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible. With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation. The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. The integrated aRGB strips are now standard in combination with the nickel-acrylic variants. This means that the HEATKILLER® V can be perfectly integrated into the lighting concept of the computer. Technical specifications: Base plate material: nickel-plated electrolyte copper Material cover: acrylic glass Cover material: annealed stainless steel Connection terminal material: Acetal Dimensions: (LxWxH): 230 x 119 x 21 mm Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: Pressure tested: 2 bar Compatibility: Nvidia Geforce RTX 3080/3090 Scope of delivery: 1x HEATKILLER® V 1x HEATKILLER® LED Strip aRGB 1x mounting material Thermal Grizzly Kryonaut thermal paste

With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible. With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation. The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. Technical specifications: Base plate material: electrolyte copper Material cover: acetal Connection terminal material: Acetal Dimensions: (LxWxH): 230 x 119 x 21 mm Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: Pressure tested: 2 bar Compatibility: Nvidia Geforce RTX 3080/3090 Scope of delivery: 1x HEATKILLER® V 1x mounting material Thermal Grizzly Kryonaut thermal paste

With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible. With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation. The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. Technical specifications: Base plate material: electrolyte copper Material cover: acrylic glass Cover material: annealed stainless steel Connection terminal material: Acetal Dimensions: (LxWxH): 230 x 119 x 21 mm Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: Pressure tested: 2 bar Compatibility: Nvidia Geforce RTX 3080/3090 Scope of delivery: 1x HEATKILLER® V 1x mounting material Thermal Grizzly Kryonaut thermal paste

The EK-Quantum Vector FTW3 RTX 3080/3090 D-RGB GPU cooler, has been further developed based on the 2nd generation Vector series and designed for the EVGA FTW3 RTX 3080 and 3090 graphics cards. The Vector water block directly cools the GPU, VRAM and VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The base of the block is made of nickel-plated copper, while the top is made of acetal. Furthermore, the cooler has D-RGB lighting, with a total of 9 individually addressable LEDs, which makes the end piece shine pleasantly. The lighting is compatible with all common RGB sync technologies of the major motherboard manufacturers, such as ASRock Polychrome Sync, ASUS Aura Sync, Gigabyte RGB Fusion and MSI Mystic Light. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate. Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 314 x 155 x 20.5mm (L x H x W) Material: Nickel-Plated Copper, Acetal Threads: G1/4" Scope of Delivery: EK-Quantum Vector FTW3 RTX 3080/3090 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility EVGA GeForce RTX 3080 FTW3 Gaming (10G-P5-3895-KR) EVGA GeForce RTX 3080 FTW3 Ultra Gaming (10G-P5-3897-KR) EVGA GeForce RTX 3080 FTW3 Ultra Hybrid Gaming (10G-P5-3898-KR) EVGA GeForce RTX 3080 FTW3 Ultra Hydro Copper Gaming (10G-P5-3899-KR) EVGA GeForce RTX 3090 FTW3 Gaming (24G-P5-3985-KR) EVGA GeForce RTX 3090 FTW3 Ultra Gaming (24G-P5-3987-KR) EVGA GeForce RTX 3090 FTW3 Ultra Hybrid Gaming (24G-P5-3988-KR) EVGA GeForce RTX 3090 FTW3 Ultra Hydro Copper Gaming (24G-P5-3989-KR)

Profi-CPU-Wasserkühler von EKWB, Kühlerboden aus vernickeltem Kupfer, Deckel aus schwarzem Acetal, speziell für AMD AM4-Sockel, hochwertige Verarbeitung und edles Design, modulare Konstruktion mit austauschbaren Komponenten, integrierte D-RGB-Beleuchtung

Rubber Fan Mounts

L x W x H: 394,5 x 124 x 30 mm Material: cooling fins & channels, prechamber copper outer housing steel Fins per Inch: 15 Threads: 5x G1/4“ Fan size :120 mm Fan slots: 3 one-sided / 6 double-sided Pressure tested: 1,5 Bar Max working temperature: 180 °C

The Barrow Backplate for GALAX/GAINWARD 3090 full coverage GPU Water Block - Silvery Backplate is made of aluminium. This ensures improved cooling. Compatibility: GALAX RTX 3090 OC GALAX RTX 3090 GALAX RTX 3080 OC GALAX RTX 3080 Gainward RTX 3090 OC Gainward RTX 3090 Gainward RTX 3080 10G Gainward RTX 3080 OC 10G Technical Data Material: Aluminium Dimensions: 215,8 x 106,6 x 5,5mm Colour: Silver Weight: 100g Scope of Delivery Barrow Backplate for GALAX/GAINWARD 3090 full coverage GPU Water Block - Silvery

Can the Eisbaer from Alphacool become even better? Absolutely! Would the Eisbaer look even more impressive with aRGB? Definitely yes!! The Eisbaer Aurora AIO still cools the CPU with the well-known and high-quality copper cooler of the Eisbaer, although the surface area has been enlarged, compared to its predecessor. Also, the pump works much more efficiently with 10% more power, with reduced noise level. The hoses and fittings have also been completely revised and are now much smoother and more inconspicuous. Since durable TPV hose and fittings from the Enterprise Solution series are now used, safety and durability is also one of the features. For more individuality, fittings and hose can be easily replaced thanks to the G1/4 fittings. The Eisbaer Aurora, as before, can be expanded via the quick release fasteners. Also refilling is still possible. The most striking feature of the Eisbaer Aurora is the addressable RGB LED lighting. Here the focus is on the Eisbaer pump and the stylish Aurora LUX Pro fans. By using a compatible mainboard or controller, colour and effects can be adjusted individually. Technical Data: Radiator Dimension: 313,5 x 144 x 30 mm (L x W x H) Material: Full Copper Threads: 2x G1/4" Tubes Dimensions: 12,7 / 7,6 mm Material: Thermoplastic vulcanisates, EPDM/PP Colour: Matt black Operating temperature: -50 to +155°C Hardness: 35 Shore-A to 50 Shore-D Length: 40 cm Pump Housing Dimension: 66 x 66 x 69 mm (L x W x H) Material Reservoir: Transparent Nylon Threads: 2x G1/4" Connection Digital RGB: 3-Pin JST + 3-Pin 5V Quantity Digital aRGB LED: 10 Pump Speed: 2600 rpm Voltage: 7 - 13,5V DC Power Consumption: 4W Max. Flow Rate: 75 L/h Max. Head: 0,95 m Fans Size: 140 x 140 x 25 mm Speed: 600 - 1500 rpm Static Pressure: 0,41 - 1,6 mm H2O Air Flow Rate: 27 - 71 m³/h Bearings: Hydraulic Fan Connector: 4-Pin PWM Connection Digital RGB: 3-Pin JST + 3-Pin 5V Compatiblity Intel 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AMD AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / TR4 / sTRX4

The Barrow Water discharge external plane support 120mm is an adapter for mounting an AGB or pump on a 120mm fan space. The support is made of metal and coated with powder. Technical Data: Material: Powder coated metal Colour: Black Mounting: 120mm fan slot Dimensions: 120 x 120 x 1,5 mm Scope of delivery: Barrow Water discharge external plane support 120mm

The Barrow Water discharge external plane support 140mm is an adapter for mounting an AGB or pump on a 140mm fan space. The support is made from metal and powder coated. Technical Data: Material: Powder coated metal Colour: Black Mounting: 140mm fan space Dimensions: 140 x 140 x 1,5 mm Scope of Delivery: Barrow Water discharge external plane support 140mm

The Alphacool ES 1U ServerRack has been specifically optimised to accommodate water cooling sets that can dissipate up to 490W of waste heat in this enclosure. For this purpose, the enclosure not only offers a mounting frame for a maximum of one 7x40mm full copper radiator of the Alphacool NexXxoS series. The optionally available Alphacool ES 40 mm fans with PWM control ensure optimum cooling performance. Drives The 1U server rack offers mounting options for two 5.25" drives on the left and right side of the front. Each 5.25" bay offers the alternative of mounting two 3.5" drives. A holding frame for mounting up to four 2.5" drives is pre-mounted in the centre front. This holding frame can be mounted at five other positions in the enclosure. Mainboard For mounting an SSI-EBB mainboard, all the usual screw connection options in the classic ATX format are available. This includes all mounting holes for Mini-ITX to EE-ATX. A graphics card in PCIe or 0.8" low-profile format can also be installed via a riser cable. A corresponding panel for 0.8" cards is pre-mounted in the case. Water cooling for 490W waste heat With an appropriate water cooling system, up to 490W of waste heat can be dissipated in this case. Alphacool offers special water cooling sets for this purpose, which can be individually configured and are delivered to the customer pre-filled. The mounting frame for the radiator and fans can be moved within the enclosure to suit any set-up. Please note: The case comes without I/O panel. Alphacool offers a separate set of I/O panel and cable set under item number 1021066. Overview of all compatible sets for this enclosure can be found here! (Attention: This link redirects you to the manufacturer's website www.alphacool.com) Alphacool recommends the following compatible products for this case. Radiators 1015753 - NexXxoS UT60 Full Copper X-Flow 40mm Dual (2 x 40mm) 1015717 - NexXxoS UT60 Full Copper X-Flow 40mm Triple (3 x 40mm) 1015718 - NexXxoS UT60 Full Copper X-Flow 40mm Quad (4 x 40mm) 1015719 - NexXxoS UT60 Full Copper X-Flow 40mm Penta (5 x 40mm) 1015720 - NexXxoS UT60 Full Copper X-Flow 40mm Hexa (6 x 40mm) 1015721 - NexXxoS UT60 Full Copper X-Flow 40mm Hepta (7 x 40mm) Reservoir with integrated pump top 1016193 - Alphacool Eisstation 40 DC-LT (Empfohlene Pumpe: 49061 ) 1017717 - Alphacool ES Reservoir 1U – DDC (Empfohlene Pumpe: 1019539 ) CPU Cooler 1016218 - Alphacool XPX 1U (AMD AM4, Intel LGA 1150, 1151, 1200, 2033, 2033-1, 2066) 1015815 - Alphacool XPX Pro 1U (AMD TR4, sTRX4, SP3, sWRX8, Intel LGA 2011, 2011,3, 2066, 3647) Fans 1020163 - Alphacool ES 40mm 400-15.000rpm PWM (40x40x28mm) 1020160 - Alphacool ES 40mm 400-10.000rpm PWM (40x40x20mm) Techncal data: Form factor 1HE (2U) Length 730,75 mm (28,77 Inch) Width 478,50 mm (18,84 Inch) Height 44,45 mm (1,75 Inch) Weight 7,62 kg (16,80 lbs) Material Galvanised sheet steel Materialdicke 1,2 mm Colour Case Grey Colour Front Black Standard Optional 2 x 5,25“ Slots Per Slot 1 x 3,5“ 4 x 2.5“ HDD/SSD Download Manual PDF: Alphacool ES 1U - 19" Serverrack Download Datasheet PDF: Alphacool ES 1U - 19" Serverrack

The Bykski silver fittings are made of brass and are designed for 16/10mm Soft Tubes. Technical Data: Material: Brass Color: Silver Thread: G1/4 Zoll Thread Length: 5 mm Tubing Size: 16/10 mm (ID 3/8", OD 5/8")

The fitting in black by Bykski, is made of brass and has a 90° angle. The fitting fits 14mm Hard Tubes and allows 90 degree bends in the water cooling system without having to deform the tube itself. Technical Data: Material: Brass Colour: Black Angle: 90° Connection: 2x Ø 14 mm Compatible Tube: 14 mm OD (PETG, Acrylic, Metal)

Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®. (Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316 , Dremel® - Art.No: 32196 and 32229 ) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 90° 10/30cm WARNING: Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention: This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter

With the 5v Addressable RGB (RBW) adapter cable from Bykski, a 5V A-RGB LED header can be connected directly to a compatible mainboard. Technical Data Voltage: 5V only LED Type: 5V RBW Scope of Delivery 1x Adapter Cable

The Barrow LRC2.0 full coverage GPU Water Block for Colorful BATTLEAX 3090 Aurora is a complete GPU cooler. It covers and cools all important components such as GPU RAM, capacitors and GPU processor. This cooler was specially developed for the Nvidia Colorful BATTLEAX 3090. The cooler plate is made of nickel-plated copper and is equipped with special micro cooling channels for optimal cooling. The lid with the integrated RGB lighting is made of acrylic glass. The RGB's are controlled via a 4Pin connector on the mainboard. Compatibility Colorful BATTLEAX RTX 3090 24G Colorful BATTLEAX RTX 3080 10G Technical Data Material: Nickel-Plated Copper (base) / Acrylic (cover) Dimensions: 250 x 122,3 x 20,4mm Colour: Silver / Transparent Cover: complete GPU cooler Threads: 2x G1/4" female Lighting: integrated RGB lighting Connections: 4Pin 5V RGB lighting Scope of Delivery Barrow LRC2.0 full coverage GPU Water Block for Colorful BATTLEAX 3090 Aurora

The Barrow LRC2.0 full coverage GPU Water Block for Colorful Vulcan 3090 Aurora is a complete GPU cooler. It covers and cools all important components such as GPU RAM, capacitors and GPU processor. This cooler was specially developed for the Nvidia Colorful Vulcan 3090. The cooler plate is made of nickel-plated copper and is equipped with special micro cooling channels for optimal cooling. The lid with the integrated RGB lighting is made of acrylic glass. The RGB's are controlled via a 4Pin connector on the mainboard. Compatibility Colorful iGame RTX 3080 Vulcan X OC 10G Colorful iGame RTX 3080 Vulcan OC 10G Colorful iGame RTX 3080 Vulcan 10G Colorful iGame RTX 3080 Neptune OC 10G Colorful iGame RTX 3080 Neptune 10G Technical Data Material: Nickel-Plated Copper (base), Acrylic Glass (cover) Dimensions: 296,2 x 145,5 x 20,4mm Colour: Silver / Transparent Cover: complete GPU cooler Lighting: integrated RGB lighting Threads: 2x G1/4" internal thread Connections: 4Pin 5V RGB lighting Scope of Delivery Barrow LRC2.0 full coverage GPU Water Block for Colorful Vulcan 3090 Aurora